Displaying publications 1 - 20 of 39 in total

Abstract:
Sort:
  1. Abdul Rahman N, Ramli R, Abdul Rahman R, Hussaini HM, Abdul Hamid AL
    Geriatr Gerontol Int, 2010 Jan;10(1):64-9.
    PMID: 20102384 DOI: 10.1111/j.1447-0594.2009.00561.x
    Road traffic accidents are the main cause of trauma in Malaysia. It has been shown that there was an increase in admissions for trauma patients older than 60 years in the last decade. The purpose of this study was to determine the pattern of maxillofacial injuries in the geriatric patients referred to Seremban Hospital, Malaysia.
  2. Abdul Rahman N, Jose Jol C, Albania Linus A, Wan Borhan WWS, Abdul Jalal NS, Baharudin N, et al.
    Sci Total Environ, 2023 Jul 01;880:163517.
    PMID: 37068674 DOI: 10.1016/j.scitotenv.2023.163517
    Sarawak coastal peatlands located on Borneo Island have vast availability of brackish peat water sources especially in some coastal rural areas. However, brackish peat water is currently underutilized as the source for water treatment plants due to excessive salinity levels. As such, this study aims to investigate the salinity reduction in brackish peat water sources for domestic consumption in Sarawak coastal peatlands by utilizing continuous electrocoagulation treatment with aluminium electrodes. Correspondingly, this study analyzes the effects of salinity percentage, electric current, and flow rate on salinity reduction with electrocoagulation treatment. This study has found that the treated salinity levels in brackish peat water with 30 % of salinity percentage meet the Malaysia Class I in National Water Quality Standard. The study has also identified both monolayer and multilayer adsorption that occurs in electrocoagulation treatment as the precursor to salinity reduction. In addition, the presence of in-situ aluminium hydroxide coagulants could adsorb some sodium chloride from brackish peat water with 70 % of salinity percentage at 2503 mg/g of maximum adsorption capacity and 2.65 min-1 of adsorption rate. This study has also found that electrocoagulation treatment could achieve 91.78 % of maximum salinity reduction efficiency at an optimum electric current of 5 A and flow rate of 1.2 L/min in brackish peat water with 30 % of salinity percentage. This treatment system costs only Ringgit Malaysia (RM) 0.29 or United States Dollars (USD) 0.06 per meter cubic of treated brackish peat water. Overall, this study demonstrates that continuous electrocoagulation treatment could partially desalinate brackish peat water with 30 % of salinity percentage in which the treated salinity levels could be utilized for domestic consumption in Sarawak coastal peatlands at reasonable cost.
  3. Abdul Rahman N, Abd Halim MR, Mahawi N, Hasnudin H, Al-Obaidi JR, Abdullah N
    Biomed Res Int, 2017;2017:2038062.
    PMID: 28503566 DOI: 10.1155/2017/2038062
    Corn was inoculated with Lactobacillus plantarum and Propionibacterium freudenreichii subsp. shermanii either independently or as a mixture at ensiling, in order to determine the effect of bacterial additives on corn silage quality. Grain corn was harvested at 32-37% of dry matter and ensiled in a 4 L laboratory silo. Forage was treated as follows: bacterial types: B0 (without bacteria-control), B1 (L. plantarum), B2 (P. freudenreichii subsp. shermanii), and B3 (combination of L. plantarum and P. freudenreichii subsp. shermanii). Each 2 kg of chopped forage was treated with 10 mL of bacterial culture and allowed to ferment for 27 days. The first experiment determined the most suitable wavelength for detection of bacteria (490 nm and 419 nm for B1 and B2, resp.) and the preferable inoculation size (1 × 105 cfu/g). The second experiment analysed the effect of B1 and B2 applied singly or as a mixture on the fermentation characteristics and quality of corn silage. L. plantarum alone increased crude protein (CP) and reduced pH rapidly. In a mixture with P. freudenreichii, the final pH was the lowest compared to other treatments. As a mixture, inclusion of bacteria resulted in silage with lower digestibility than control. Corn silage treated with L. plantarum or P. freudenreichii either alone or mixed together produced desirable silage properties; however, this was not significantly better than untreated silage.
  4. Abdul Rahman N', Nurumal MS, Awang MS, Mohd Shah ANS
    Australas Emerg Care, 2020 Dec;23(4):240-246.
    PMID: 32713770 DOI: 10.1016/j.auec.2020.06.005
    INTRODUCTION: Emergency departments (EDs) routinely provide discharge instructions due to a large number of patients with mild traumatic brain injury (mTBI) being discharged home directly from ED. This study aims to evaluate the quality of available mTBI discharge instructions provided by EDs of Malaysia government hospitals.

    METHODS: All 132 EDs were requested for a copy of written discharge instruction given to the patients. The mTBI discharge instructions were evaluated using the Patient Education Materials Assessment-Printable Tool (PEMAT-P) for understandability and actionability. Readability was measured using an online readability tool of Malay text. The content was compared against the discharge instructions recommended by established guidelines.

    RESULTS: 49 articles were eligible for the study. 26 of the articles met the criteria of understandability, and 3 met the criteria for actionability. The average readability level met the ability of average adult. Most of the discharge instructions focused on emergency symptoms, and none contained post-concussion features.

    CONCLUSION: Majority of the discharge instructions provided were appropriate for average people to read but difficult to understand and act upon. Important information was neglected in most discharge instructions. Thus, revision and future development of mTBI discharge instruction should consider health literacy demand and cognitive ability to process such information.

  5. Abdul Rahman NH, Chieng BW, Ibrahim NA, Abdul Rahman N
    Polymers (Basel), 2017 Nov 07;9(11).
    PMID: 30965890 DOI: 10.3390/polym9110588
    The aim was to explore the utilization of tea leaf waste fibers (TLWF) as a source for the production of cellulose nanocrystals (CNC). TLWF was first treated with alkaline, followed by bleaching before being hydrolyzed with concentrated sulfuric acid. The materials attained after each step of chemical treatments were characterized and their chemical compositions were studied. The structure analysis was examined by Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD). From FTIR analysis, two peaks at 1716 and 1207 cm-1-which represent C=O stretching and C⁻O stretching, respectively-disappeared in the spectra after the alkaline and bleaching treatments indicated that hemicellulose and lignin were almost entirely discarded from the fiber. The surface morphology of TLWF before and after chemical treatments was investigated by scanning electron microscopy (SEM) while the dimension of CNC was determined by transmission electron microscopy (TEM). The extraction of CNC increased the surface roughness and the crystallinity index of fiber from 41.5% to 83.1%. Morphological characterization from TEM revealed the appearance of needle-like shaped CNCs with average diameter of 7.97 nm. The promising results from all the analyses justify TLWF as a principal source of natural materials which can produce CNC.
  6. Abdul-Rahman NR, Mohammad KF, Ibrahim S
    Singapore Med J, 2009 Jun;50(6):e223-5.
    PMID: 19551303
    The Klippel-Trenaunay syndrome is a combination of venous and capillary malformations associated with soft tissue and/or bony limb hypertrophy, with or without lymphatic malformations. Although persistent foetal veins are rare, the persistence of the lateral marginal vein is a common association in this syndrome. It results in venous hypertension, which gives rise to venous varicosities, which are commonly seen in this syndrome. This is a case report of a 28-year-old man with Klippel-Trenaunay syndrome, with persistence of the lateral marginal vein, affecting his right lower limb. He was treated with an above-knee amputation. The amputated limb was dissected to demonstrate the anatomy of the lateral marginal vein. To the best of the authors' knowledge, the gross anatomy of the lateral marginal vein has not been previously reported.
  7. Abu Hassan Shaari H, Ramli MM, Mohtar MN, Abdul Rahman N, Ahmad A
    Polymers (Basel), 2021 Jun 11;13(12).
    PMID: 34207932 DOI: 10.3390/polym13121939
    Poly(methyl methacrylate) (PMMA) is a lightweight insulating polymer that possesses good mechanical stability. On the other hand, polyaniline (PANi) is one of the most favorable conducting materials to be used, as it is easily synthesized, cost-effective, and has good conductivity. However, most organic solvents have restricted potential applications due to poor mechanical properties and dispersibility. Compared to PANi, PMMA has more outstanding physical and chemical properties, such as good dimensional stability and better molecular interactions between the monomers. To date, many research studies have focused on incorporating PANi into PMMA. In this review, the properties and suitability of PANi as a conducting material are briefly reviewed. The major parts of this paper reviewed different approaches to incorporating PANi into PMMA, as well as evaluating the modifications to improve its conductivity. Finally, the polymerization condition to prepare PMMA/PANi copolymer to improve its conductivity is also discussed.
  8. Ahmad MAT, Abdul Rahman N
    Polymers (Basel), 2021 Nov 15;13(22).
    PMID: 34833237 DOI: 10.3390/polym13223938
    In this study, polyacrylonitrile (PAN) was mixed with a renewable polymer, lignin, to produce electrospun nanofibers by using an electrospinning technique. Lignin was utilized as a soft template that was removed from the nanofibers by using a selective dissolution technique to create porous PAN nanofibers. These nanofibers were characterized with Fourier transform infrared (FTIR), field emission scanning electron microscopy (FESEM), thermogravimetry analysis (TGA), X-ray diffraction (XRD), and Brunauer-Emmett-Teller (BET) to study their properties and morphology. The results showed that lignin can be homogeneously mixed into the PAN solution and successfully electrospun into nanofibers. FESEM results showed a strong relationship between the PAN: lignin ratio and the diameter of the electrospun fibers. Lignin was successfully removed from electrospun nanofibers by a selective chemical dissolution technique, which resulted in roughness and porousness on the surface of the nanofibers. Based on the BET result, the specific surface area of the PAN/lignin nanofibers was more than doubled following the removal of lignin compared to PAN nanofibers. The highest specific surface area of nanofibers after selective chemical dissolution was found at an 8:2 ratio of PAN/lignin, which was 32.42 m2g-1 with an average pore diameter of 5.02 nm. The diameter of electrospun nanofibers was also slightly reduced after selective chemical dissolution. Porous PAN nanofibers can be seen as the precursors to the production of highly porous carbon nanofibers.
  9. Ahmad S, Usman Mirza M, Yean Kee L, Nazir M, Abdul Rahman N, Trant JF, et al.
    Chem Biol Drug Des, 2021 Oct;98(4):604-619.
    PMID: 34148292 DOI: 10.1111/cbdd.13914
    3CLpro is essential for SARS-CoV-2 replication and infection; its inhibition using small molecules is a potential therapeutic strategy. In this study, a comprehensive crystallography-guided fragment-based drug discovery approach was employed to design new inhibitors for SARS-CoV-2 3CLpro. All small molecules co-crystallized with SARS-CoV-2 3CLpro with structures deposited in the Protein Data Bank were used as inputs. Fragments sitting in the binding pocket (87) were grouped into eight geographical types. They were interactively coupled using various synthetically reasonable linkers to generate larger molecules with divalent binding modes taking advantage of two different fragments' interactions. In total, 1,251 compounds were proposed, and 7,158 stereoisomers were screened using Glide (standard precision and extra precision), AutoDock Vina, and Prime MMGBSA. The top 22 hits having conformations approaching the linear combination of their constituent fragments were selected for MD simulation on Desmond. MD simulation suggested 15 of these did adopt conformations very close to their constituent pieces with far higher binding affinity than either constituent domain alone. These structures could provide a starting point for the further design of SARS-CoV-2 3CLpro inhibitors with improved binding, and structures are provided.
  10. Allison SD, AdeelaYasid N, Shariff FM, Abdul Rahman N
    J Microbiol Biotechnol, 2024 Feb 28;34(2):436-456.
    PMID: 38044750 DOI: 10.4014/jmb.2306.06050
    Several thermostable proteases have been identified, yet only a handful have undergone the processes of cloning, comprehensive characterization, and full exploitation in various industrial applications. Our primary aim in this study was to clone a thermostable alkaline protease from a thermophilic bacterium and assess its potential for use in various industries. The research involved the amplification of the SpSKF4 protease gene, a thermostable alkaline serine protease obtained from the Geobacillus thermoglucosidasius SKF4 bacterium through polymerase chain reaction (PCR). The purified recombinant SpSKF4 protease was characterized, followed by evaluation of its possible industrial applications. The analysis of the gene sequence revealed an open reading frame (ORF) consisting of 1,206 bp, coding for a protein containing 401 amino acids. The cloned gene was expressed in Escherichia coli. The molecular weight of the enzyme was measured at 28 kDa using sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). The partially purified enzyme has its highest activity at a pH of 10 and a temperature of 80°C. In addition, the enzyme showed a half-life of 15 h at 80°C, and there was a 60% increase in its activity at 10 mM Ca2+ concentration. The activity of the protease was completely inhibited (100%) by phenylmethylsulfonyl fluoride (PMSF); however, the addition of sodium dodecyl sulfate (SDS) resulted in a 20% increase in activity. The enzyme was also stable in various organic solvents and in certain commercial detergents. Furthermore, the enzyme exhibited strong potential for industrial use, particularly as a detergent additive and for facilitating the recovery of silver from X-ray film.
  11. Arigela CS, Nelli G, Gan SH, Sirajudeen KNS, Krishnan K, Abdul Rahman N, et al.
    Foods, 2021 Nov 20;10(11).
    PMID: 34829154 DOI: 10.3390/foods10112872
    Honey has several pharmacological effects, including anti-diabetic activity. However, the effectiveness of bitter gourd honey (BGH) in the treatment of diabetes mellitus (DM) is unknown. The aim of this study was to determine the antioxidant, anti-inflammatory, and anti-apoptotic properties of BGH on the kidney and liver of a streptozotocin-induced diabetes rat model.

    METHODS: A single dose (nicotinamide 110 mg/kg, streptozotocin (STZ) 55 mg/kg, intraperitoneal (i.p.)) was used to induce DM in male rats. For 28 days, normal or diabetic rats were administered 1 g/kg/day and 2 g/kg/day of BGH orally. After the treatment, blood, liver, and kidney samples were collected and analysed for biochemical, histological, and molecular parameters. In addition, liquid chromatography-mass spectrometry (LC-MS) was used to identify the major bioactive components in BGH.

    RESULTS: The administration of BGH to diabetic rats resulted in significant reductions in alanine transaminase (ALT),aspartate aminotransferase (AST), creatinine, and urea levels. Diabetic rats treated with BGH showed lesser pathophysiological alterations in the liver and kidney as compared to non-treated control rats. BGH-treated diabetic rats exhibited reduced levels of oxidative stress (MDA levels), inflammatory (MYD88, NFKB, p-NFKB, IKKβ), and apoptotic (caspase-3) markers, as well as higher levels of antioxidant enzymes (SOD, CAT, and GPx) in the liver and kidney. BGH contains many bioactive compounds that may have antioxidative stress, anti-inflammatory, and anti-apoptotic effects.

    CONCLUSION: BGH protected the liver and kidney in diabetic rats by reducing oxidative stress, inflammation, and apoptosis-induced damage. As a result, BGH can be used as a potential therapy to ameliorate diabetic complications.

  12. Azmi N, Tiew Toot Chaw W, Abdul Rahman N, Zaihan S, Ahmad Kammal WSE
    Cureus, 2024 Mar;16(3):e55993.
    PMID: 38606263 DOI: 10.7759/cureus.55993
    Crohn's disease (CD) is an inflammatory condition affecting the gastrointestinal tract, often leading to persistent inflammation in various parts, notably the terminal ileum and colon. Clinical manifestations of CD can become complex due to complications like strictures, fistulas, and perianal abscesses. The disease typically exhibits transmural inflammation and skip lesions, where unaffected areas alternate with affected ones. Treatment goals focus on achieving disease remission and preventing complications that may require surgical intervention. Surgery becomes crucial in managing complications such as Crohn's strictures and perforations. Here, we describe a challenging case involving a young woman who underwent surgery for abdominal abscess and with Crohn's stricture and fistula.
  13. Baharuddin A, Amir Hassan A, Othman R, Xu Y, Huang M, Ario Tejo B, et al.
    Chem Pharm Bull (Tokyo), 2014;62(10):947-55.
    PMID: 25273053
    In the efforts to find an anti-viral treatment for dengue, a simple tryptophan fluorescence-screening assay aimed at identifying dengue domain III envelope (EIII) protein inhibitors was developed. Residue Trp391 of EIII was used as an intrinsic probe to monitor the change in fluorescence of the tryptophan residue upon binding to a peptide. The analysis was based on the electron excitation at 280 nm and fluorescence emission at 300-400 nm of EIII, followed by quenching of fluorescence in the presence of potential peptidic inhibitors coded DS36wt, DS36opt, DN58wt and DN58opt. The present study found that the fluorescence of the recombinant EIII was quenched following the binding of DS36opt, DN58wt and DN58opt in a concentration-dependent manner. Since the λmax for emission remained unchanged, the effect was not due to a change in the environment of the tryptophan side chain. In contrast, a minimal fluorescence-quenching effect of DS36wt at 20 and 40 µM suggested that the DS36wt does not have any binding ability to EIII. This was supported by a simple native-page gel retardation assay that showed a band shift of EIII domain when incubated with DS36opt, DN58wt and DN58opt but not with DS36wt. We thus developed a low-cost and convenient spectrophotometric binding assay for the analysis of EIII-peptide interactions in a drug screening application.
  14. Chia SL, Tan WS, Shaari K, Abdul Rahman N, Yusoff K, Satyanarayanajois SD
    Peptides, 2006 Jun;27(6):1217-25.
    PMID: 16377031
    A peptide with the sequence CTLTTKLYC has previously been identified to inhibit the propagation of Newcastle disease virus (NDV) in embryonated chicken eggs and tissue culture. NDV has been classified into two main groups: the velogenic group, and mesogenic with lentogenic strains as the other group based on its dissociation constants. In this study the peptide, CTLTTKLYC, displayed on the pIII protein of a filamentous M13 phage was synthesized and mutated in order to identify the amino acid residues involved in the interactions with NDV. Mutations of C1 and K6 to A1 and A6 did not affect the binding significantly, but substitution of Y8 with A8 dramatically reduced the interaction. This suggests that Y8 plays an important role in the peptide-virus interaction. The three-dimensional structure of the peptide was determined using circular dichroism (CD), nuclear magnetic resonance (NMR), and molecular modeling. The peptide exhibited two possible conformers. One that consists of consecutive beta-turns around T2-L3-T4-T5 and K6-L7-Y8-C9. The other conformer exhibited a beta-hairpin bend type of structure with a bend around L3-T4-T5-K6.
  15. Chua LS, Abdul-Rahman N, Rosidi B, Lee CT
    Nat Prod Res, 2013 Mar;27(4-5):314-8.
    PMID: 22468741 DOI: 10.1080/14786419.2012.676552
    A water extraction method has been used to extract plant proteins from the roots of Eurycoma longifolia harvested from Perak and Pahang, Malaysia. On the basis of the spectroscopic Bradford assay, Tongkat Ali Perak and Pahang contained 0.3868 and 0.9573 mg mL(-1) of crude protein, respectively. The crude proteins were separated by one dimensional 15% sodium dodecyl sulphate polyacrylamide gel electrophoresis into two (49.8 and 5.5 kD) and four (49.8, 24.7, 21.1 and 5.5 kD) protein spots for Tongkat Ali Perak and Pahang, respectively. Isoleucine was present in the highest concentration significantly. Both plant samples showed differences in the mineral and trace element profiles, but the minerals calcium, magnesium and potassium were present in the highest concentration. The highly concerned toxic metals such as arsenic and lead were not detected.
  16. Dabbagh A, Abu Kasim NH, Yeong CH, Wong TW, Abdul Rahman N
    J Aerosol Med Pulm Drug Deliv, 2018 06;31(3):139-154.
    PMID: 29022837 DOI: 10.1089/jamp.2017.1382
    Targeted delivery of chemotherapeutics through the respiratory system is a potential approach to improve drug accumulation in the lung tumor, while decreasing their negative side effects. However, elimination by the pulmonary clearance mechanisms, including the mucociliary transport system, and ingestion by the alveolar macrophages, rapid absorption into the blood, enzymatic degradation, and low control over the deposition rate and location remain the main complications for achieving an effective pulmonary drug delivery. Therefore, particle-based delivery systems have emerged to minimize pulmonary clearance mechanisms, enhance drug therapeutic efficacy, and control the release behavior. A successful implementation of a particle-based delivery system requires understanding the influential parameters in terms of drug carrier, inhalation technology, and health status of the patient's respiratory system. This review aims at investigating the parameters that significantly drive the clinical outcomes of various particle-based pulmonary delivery systems. This should aid clinicians in appropriate selection of a delivery system according to their clinical setting. It will also guide researchers in addressing the remaining challenges that need to be overcome to enhance the efficiency of current pulmonary delivery systems for aerosols.
  17. Foo FY, Abdul Rahman N, Shaik Abdullah FZ, Abd Naeeim NS
    Infect Dis Model, 2024 Jun;9(2):387-396.
    PMID: 38385018 DOI: 10.1016/j.idm.2024.01.009
    At the end of the year 2019, a virus named SARS-CoV-2 induced the coronavirus disease, which is very contagious and quickly spread around the world. This new infectious disease is called COVID-19. Numerous areas, such as the economy, social services, education, and healthcare system, have suffered grave consequences from the invasion of this deadly virus. Thus, a thorough understanding of the spread of COVID-19 is required in order to deal with this outbreak before it becomes an infectious disaster. In this research, the daily reported COVID-19 cases in 92 sub-districts in Johor state, Malaysia, as well as the population size associated to each sub-district, are used to study the propagation of COVID-19 disease across space and time in Johor. The time frame of this research is about 190 days, which started from August 5, 2021, until February 10, 2022. The clustering technique known as spatio-temporal clustering, which considers the spatio-temporal metric was adapted to determine the hot-spot areas of the COVID-19 disease in Johor at the sub-district level. The results indicated that COVID-19 disease does spike in the dynamic populated sub-districts such as the state's economic centre (Bandar Johor Bahru), and during the festive season. These findings empirically prove that the transmission rate of COVID-19 is directly proportional to human mobility and the presence of holidays. On the other hand, the result of this study will help the authority in charge in stopping and preventing COVID-19 from spreading and become worsen at the national level.
  18. Foo JB, Low ML, Lim JH, Lor YZ, Zainol Abidin R, Eh Dam V, et al.
    Biometals, 2018 08;31(4):505-515.
    PMID: 29623473 DOI: 10.1007/s10534-018-0096-4
    Copper complexes have been widely studied for the anti-tumour application as cancer cells are reported to take up greater amounts of copper than normal cells. Preliminary study revealed that the newly synthesised copper complex [Cu(SBCM)2] displayed marked anti-proliferative towards triple-negative MDA-MB-231 breast cancer cells. Therefore, Cu(SBCM)2 has great potential to be developed as an agent for the management of breast cancer. The present study was carried out to investigate the mode of cell death induced by Cu(SBCM)2 towards MDA-MB-231 breast cancer cells. The inhibitory and morphological changes of MDA-MB-231 cells treated with Cu(SBCM)2 was determined by using MTT assay and inverted light microscope, respectively. The safety profile of Cu(SBCM)2 was also evaluated towards human dermal fibroblast (HDF) normal cells. Confirmation of apoptosis and cell cycle arrest were determined by flow cytometry analysis. The expression of p53, Bax, Bcl-2 and MMP2 protein were detected with western blot analysis. Cu(SBCM)2 significantly inhibited the growth of MDA-MB-231 cells in a dose-dependent manner with GI50 18.7 ± 3.06 µM. Indeed, Cu(SBCM)2 was less toxic towards HDF normal cells with GI50 31.8 ± 4.0 µM. Morphological study revealed that Cu(SBCM)2-treated MDA-MB-231 cells experienced cellular shrinkage, membrane blebbing, chromatin condensation and formation of apoptotic bodies, suggesting that Cu(SBCM)2 induced apoptosis in the cells, which was confirmed by Annexin-V/PI flow cytometry analysis. It was also found that Cu(SBCM)2 induced G2/M phase cell cycle arrest towards MDA-MB-231 cells. The induction of apoptosis and cell cycle arrest in the present study is possibly due to the down-regulation of the mutant p53 and MMP2 protein. In conclusion, Cu(SBCM)2 can be developed as a targeted therapy for the treatment of triple-negative breast cancer.
  19. Hisham MB, Hashim AM, Mohd Hanafi N, Abdul Rahman N, Abdul Mutalib NE, Tan CK, et al.
    Sci Rep, 2022 May 02;12(1):7107.
    PMID: 35501317 DOI: 10.1038/s41598-022-08819-4
    Silage produced in tropical countries is prone to spoilage because of high humidity and temperature. Therefore, determining indigenous bacteria as potential inoculants is important to improve silage quality. This study aimed to determine bacterial community and functional changes associated with ensiling using amplicon metagenomics and to predict potential bacterial additives associated with silage quality in the Malaysian climate. Silages of two forage crops (sweet corn and Napier) were prepared, and their fermentation properties and functional bacterial communities were analysed. After ensiling, both silages were predominated by lactic acid bacteria (LAB), and they exhibited good silage quality with significant increment in lactic acid, reductions in pH and water-soluble carbohydrates, low level of acetic acid and the absence of propionic and butyric acid. LAB consortia consisting of homolactic and heterolactic species were proposed to be the potential bacterial additives for sweet corn and Napier silage fermentation. Tax4fun functional prediction revealed metabolic pathways related to fermentation activities (bacterial division, carbohydrate transport and catabolism, and secondary metabolite production) were enriched in ensiled crops (p 
  20. Jayaram G, Abdul Rahman N
    Acta Cytol., 1997 Jul-Aug;41(4 Suppl):1253-60.
    PMID: 9990253
    Ki-1-positive anaplastic large cell lymphoma (Ki-1 ALCL), one of the more recently described pleomorphic types of lymphoma, affects mostly children and adolescents and is sometimes mistaken for carcinoma or sarcoma.
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links