Displaying publications 1 - 20 of 141 in total

Abstract:
Sort:
  1. Ahmad P, Alam MK, Jakubovics NS, Schwendicke F, Asif JA
    J Dent Res, 2019 Dec;98(13):1425-1436.
    PMID: 31746684 DOI: 10.1177/0022034519880544
    Since its inception in 1919, the Journal of Dental Research has continually published high-quality articles that span the breadth of research topics relevant to dentistry, oral surgery, and medicine. As part of the journal's centennial celebration, we conducted an electronic search on Scopus to identify and analyze the top 100 most cited articles from 1919 to 2018. Since Scopus does not capture older citations, we conducted an additional analysis by Google Scholar to identify key articles published in the first 50 y of the journal. Based on Scopus, the articles were ranked in descending order per their citation counts. The citation counts of the 100 most cited articles varied from 262 to 1,503. The year in which the largest number of top 100 articles were published was 2004 (n = 6). Within the top 100, the majority of articles originated from the United States (n = 52). Research Reports-Biomaterials & Bioengineering was the most frequent category of cited articles (n = 35). There was no significant association between total citation count and time since publication (correlation coefficient = -0.051, P = 0.656). However, there was a significant negative association of citation density (correlation coefficient = -0.610, P < 0.01) with time since publication. Our analyses demonstrate the broad reach of the journal and the dynamics in citation patterns and research agenda over its 100-y history. There is considerable evidence of the high variance in research output, when measured via citations, across the globe. Moreover, it remains unclear how patients' priorities and dental health care needs are aligned with the perceived influence of single research pieces identified by our search. Our findings may help to inspire future research in tackling these inequalities and highlight the need for conceptualizing research priorities.
  2. Irawan BA, Irawan SN, Masudi SM, Sukminingrum N, Alam MK
    Biomed Res Int, 2015;2015:327289.
    PMID: 26558267 DOI: 10.1155/2015/327289
    This study aims to evaluate the effects of vital tooth bleaching with carbamide peroxide home bleaching and in-office bleaching on the color stability and 3D surface profile of dental restorative filling materials. Thirty discs (n = 30) measure 6 mm in diameter and 2 mm thick for each of three restorative materials. These are nanofilled composite Filtek Z350 XT, the submicron composite Estelite Σ Quick, and nanofilled glass ionomer Ketac N100 nanoionomer and were fabricated in shade A2. Each group was further divided into three subgroups (n = 10): subgroup A (Opalescence PF), subgroup B (Opalescence Boost in-office bleaching), and subgroup C (distilled water) serving as control. Samples were bleached according to the manufacturer's instructions for a period of two weeks. The Commission Internationale de L'Eclairage (CIE L(*), a(*), b(*)) system was chosen for image processing, while 3D surface profile was tested with atomic force microscopy (AFM). Statistical analyses were performed with the Mann-Whitney tests and Krusal-Wallis with a P value of ≤ 0.05. The three restorative materials showed significant color changes (ΔE); P ≤ 0.05. In diminishing order, the mean color changes recorded were Estelite Σ (3.82 ± 1.6) > Ketac Nano (2.97 ± 1.2) > Filtek Z350 XT (2.25 ± 1.0). However, none of the tested materials showed statistically significant changes in surface roughness; P > 0.05.
  3. Purmal K, Alam MK, Pohchi A, Abdul Razak NH
    PLoS One, 2013;8(12):e84202.
    PMID: 24367643 DOI: 10.1371/journal.pone.0084202
    Intermaxillary (IMF) screws feature several advantages over other devices used for intermaxillary fixation, but using cone beam computed tomography (CBCT) scans to determine the safe and danger zones to place these devices for all patients can be expensive. This study aimed to determine the optimal interradicular and buccopalatal/buccolingual spaces for IMF screw placement in the maxilla and mandible. The CBCT volumetric data of 193 patients was used to generate transaxial slices between the second molar on the right to the second molar on the left in both arches. The mean interradicular and buccopalatal/buccolingual distances and standard deviation values were obtained at heights of 2, 5, 8 and 11 mm from the alveolar bone crest. An IMF screw with a diameter of 1.0 mm and length of 7 mm can be placed distal to the canines (2 - 11 mm from the alveolar crest) and less than 8 mm between the molars in the maxilla. In the mandible, the safest position is distal to the first premolar (more than 5 mm) and distal to the second premolar (more than 2 mm). There was a significant difference (p<0.05) between the right and left quadrants. The colour coding 3D template showed the safe and danger zones based on the mesiodistal, buccopalatal and buccolingual distances in the maxilla and mandible.The safest sites for IMF screw insertion in the maxilla were between the canines and first premolars and between the first and second molars. In the mandible, the safest sites were between the first and second premolars and between the second premolar and first molar. However, the IMF screw should not exceed 1.0 mm in diameter and 7 mm in length.
  4. Ahmed N, Halim MSB, Ghani ZA, Khan ZA, Abbasi MS, Jamayet NB, et al.
    Biomed Res Int, 2021;2021:6674400.
    PMID: 33969123 DOI: 10.1155/2021/6674400
    The objective of this paper was to evaluate the existence of golden percentage in natural maxillary anterior teeth with the aid of 3D digital dental models and 2D photographs. And to propose regional values of golden percentage for restoration of maxillary anterior teeth. For this purpose, one hundred and ninety dentate subjects with sound maxillary anterior teeth were selected. Standardized frontal images were captured with DSLR, and the apparent width of maxillary anterior teeth was measured utilizing a software on a personal laptop computer. Once the dimensions were recorded, the calculations were made according to the golden percentage theory (GPT). The data were analyzed by independent and paired T-test. The level of significance was set at p < 0.05. The golden percentage values were not found in this study. The values obtained were 16%, 15%, 20%, 20%, 15%, and 16% moving from the right canine to the left canine teeth. There was no significant gender difference in the golden percentage values. Thus, golden percentage should not be used solely for the correction of anterior teeth or for determining dental attractiveness. Emphasis should be given to a range of dental proportion on regional basis.
  5. Alam MK, Ganji KK, Munisekhar MS, Alanazi NS, Alsharif HN, Iqbal A, et al.
    Saudi Dent J, 2021 Nov;33(7):687-692.
    PMID: 34803320 DOI: 10.1016/j.sdentj.2020.04.008
    Objective: CBCT (cone beam computed tomography) analysis of condyle morphometry, to investigate the gender differences, symmetry and relationship with mandibular size.

    Materials and methods: This is a retrospective study. 800 CBCT scan obtained for the measurement of condyle in anterior-posterior and medio-lateral aspect using OnDemand 3D software. Participants were Saudi nationals of age above 18 years. 395 Males and 405 Females with the mean age of 38.2 ± 10.5 years. Right and left anterior-posterior width and medio-lateral width of the condyle were measured. Condyles were not isolated on the CBCT for volume measurement.

    Results: Mean right and anterior-posterior condyle width was 9.02 mm and 8.74 mm in males whereas in females it was 9.01 mm 8.69 mm respectively. For males mean medio-lateral width of the condyle in right and left side was 17.40 mm and 16.95 mm. For females, mean medio-lateral width of the condyle in right and left side was 17.14 mm and 16.93 mm. The prediction rate of gender was 57.2% for males and 53.3% for females. Statistically significant differences (p 

  6. Ahmad WMAW, Ghazali FMM, Yaqoob MA, Alawthah GH, Srivastava KC, Shrivastava D, et al.
    J Pharm Bioallied Sci, 2021 Nov;13(Suppl 2):S1074-S1078.
    PMID: 35017932 DOI: 10.4103/jpbs.jpbs_105_21
    Background and Objectives: According to the global cancer situation, which is very alarming, with over 10 million new diagnoses and more than 6 million deaths each year globally, cancer is one of the most prominent causes of morbidity and mortality today. One of the cancers is oral cancer. Oral cancer is the irregular development of malignant cells in the oral cavity. The study's objective was to decide the mortality of cross-tabulation among patients treated for oral carcinoma from Hospital Universiti Sains Malaysia (USM), Kelantan, Malaysia.

    Materials and Methods: This chapter summarizes the medical history for 7 years from January 2011 to December 2018 of patients who have been treated for oral carcinoma in the Hospital USM, Oral and Maxillofacial Surgery (OMFS) Unit. Each patient's complete medical record was checked, and data gathered were based on age, gender, site lesion, clinical diagnosis, and mortality. Version 26.0 of the SPSS software was used to evaluate the correlation and distribution of patient survival.

    Results: This was a retrospective cross-sectional review of the medical evidence of 117 patients infected for oral carcinoma at OMFS (Hospital USM). Sixty-seven (57.26%) of the patients were male and fifty (42.74%) were female. Patient age ranged from 25 to 93 years. Malay has the highest prevalence (85.5%) in oral carcinoma, followed by a second ethnic group, Chinese (7.7%). The result indicates that the majority of oral carcinoma patients were over 60 years old.Cases of oral squamous cell carcinoma have proved to be the most prevalent malignant tumour in the mouth cavity. The largest number of cases collected is 91% of the data collected. Mucoepidermoid carcinoma (10%) is the second most common small salivary gland tumor.

    Conclusion: OSCC is the most prevalent kind of oral cancer. According to the data review, the most popular site for oral cancer is the tongue.

  7. Ghazali FMM, W Ahmad WMA, Srivastava KC, Shrivastava D, Noor NFM, Akbar NAN, et al.
    J Pharm Bioallied Sci, 2021 Jun;13(Suppl 1):S795-S800.
    PMID: 34447203 DOI: 10.4103/jpbs.JPBS_778_20
    Background and Objective: Dyslipidemia is one of the most important risk factors for coronary heart disease with diabetes mellitus. Diabetic dyslipidemia is correlated with reduced concentrations of high-density lipoprotein cholesterol, elevated concentrations of plasma triglycerides, and increased concentrations of dense small particles of low-density lipoprotein cholesterol. Furthermore, dyslipidemia is one of the factors that accelerate renal failure in patients with nephropathy that is observed to be higher in these patients. This paper aims to propose the variable selection using the multilayer perceptron (MLP) neural network methodology before performing the multiple linear regression (MLR) modeling. Dataset consists of patient with Dyslipidemia, and Type 2 Diabetes Mellitus was selected to illustrate the design-build methodology. According to clinical expert's opinion and based on their assessment, these variables were chosen, which comprises the level of creatinine, urea, total cholesterol, uric acid, sodium, and HbA1c.

    Materials and Methods: At the first stage, all the selected variables will be a screen for their clinical important point of view, and it was found that creatinine has a significant relationship to the level of urea reading, a total of cholesterol reading, and the level of uric acid reading. By considering the level of significance, α = 0.05, these three variables are being selected and used for the input of the MLP model. Then, the MLR is being applied according to the best variable obtained through MLP process.

    Results: Through the testing/out-sample mean squared error (MSE), the performance of MLP was assessed. MSE is an indication of the distance from the actual findings from our estimates. The smallest MSE of the MLP shows the best variable selection combination in the model.

    Conclusion: In this research paper, we also provide the R syntax for MLP better illustration. The key factors associated with creatinine were urea, total cholesterol, and uric acid in patients with dyslipidemia and type 2 diabetes mellitus.

  8. Alam MK, Awawdeh M, Khanagar SB, Aboelmaaty W, Abutayyem H, Alswairki HJ, et al.
    Cancers (Basel), 2023 Nov 13;15(22).
    PMID: 38001647 DOI: 10.3390/cancers15225387
    BACKGROUND: There are several significant gaps in current studies of the relationship between anti-cancer medications and orthodontic care that call for more investigation. As a result, the main goals of this systematic review and meta-analysis were to summarise and assess the information that was available regarding the effect of radiotherapy and anti-cancer medications on the overall successful completion of an orthodontic treatment plan.

    METHODS: A standardised data extraction form was devised in accordance with the PRISMA guidelines to conduct a systematic review and meta-analysis, with specific criteria implemented for selecting studies with low to moderate risk of bias.

    RESULTS: Five studies involving different methodologies were selected at the conclusion of the search strategy. The statistical analysis revealed an estimated odds ratio (OR) of 0.31 and relative risk (RR) of 0.48, indicating a statistically significant association between the use of radiotherapy and anti-neoplastic drugs and a noticeable reduction in the successful completion of orthodontic treatment. The heterogeneity analysis showed significant heterogeneity among the studies.

    CONCLUSIONS: This review emphasises that, although orthodontic therapies can still be beneficial for children receiving chemotherapy, the effectiveness of the therapy may be diminished in older populations. The findings further highlight how crucial it is to take cancer therapies into account when planning and managing orthodontic treatment in order to optimise results and reduce problems.

  9. Ahmad P, Asif JA, Alam MK, Slots J
    Periodontol. 2000, 2020 Feb;82(1):286-297.
    PMID: 31850637 DOI: 10.1111/prd.12328
    The continually high impact factor of Periodontology 2000 (7.861 for 2018), the level of which is unprecedented among dental journals, prompted the present bibliometric analysis of the Journal. Since the inception of Periodontology 2000 in 1993 and until July 2019, the top 100 most-cited articles have received a total of 21,276 (Web of Science), 23,009 (Elsevier's Scopus), and 43,518 (Google Scholar) citations. The citations of the 100 most-cited articles were found to vary from 118 to 827 (Web of Science), 10 to 1069 (Scopus), and 15 to 2028 (Google Scholar). Three articles had more than 600 (Web of Science) citations, 5 had between 400 and 600 citations, 25 had between 200 and 400 citations, and 67 had between 100 and 200 citations. The first authors of the 100 most-cited articles were based in the USA (51%), Switzerland (14%), and Australia (10%). The 5 dental institutions with the most frequently cited articles were The Forsyth Institute, USA (9 articles), The University of Queensland, Australia (8 articles), University of Bern, Switzerland (7), University of Texas Health Science Center at San Antonio, USA (6 articles), and University of Washington, USA, and Temple University School of Dentistry, USA (5 articles each). The likely reason for the high impact factor of Periodontology 2000 is publication of insightful and timely review articles produced by eminent researchers and clinicians from a wide range of dental institutions and countries.
  10. Jamayet NB, Kirangi JK, Husein A, Alam MK
    Eur J Dent, 2017 4 25;11(1):130-134.
    PMID: 28435380 DOI: 10.4103/1305-7456.202636
    Enucleation and evisceration are the most common surgical procedures that are performed to manage tumor, trauma, and infection. Given the consequences of surgical intervention, the conditions of the remaining eye socket may affect future prosthetic rehabilitation. A custom-made ocular prosthesis can be used to help restore the esthetics and functional defects and to improve the quality of life of patients with such conditions. An assessment must be performed on the prosthetic outcome before rehabilitation. The etiology of defect, type of surgery, condition of the remaining socket, and patient's age should all be considered. This report discusses three different etiological eye defects that have undergone enucleation and evisceration and describes the factors that have a significant role in the esthetic and functional outcome of the prosthesis. This report should serve as a helpful aid for maxillofacial prosthodontists to understand the primary objective of rehabilitating each eye defect and to meet patient expectations.
  11. Alam MK, Abutayyem H, Alswairki HJ, Hajeer MY, Alogaibi YA
    J Orthod Sci, 2023;12:41.
    PMID: 37881655 DOI: 10.4103/jos.jos_85_23
    The nutritional needs already increased by adolescent growth, activity, and stress are further exacerbated by the physical, physiological, and psychological stress that orthodontic treatment causes. Hence, the main objective of this systematic review was to analyze the relationship between adequate nutrition and its impact on orthodontic treatment success rates. Using relevant keywords, reference searches, and citation searches, the databases such as PubMed-Medical Literature Analysis and Retrieval System Online, Web of Science, Cochrane, and Scopus were all searched. "Diet," "Minerals," "Nutrition," "Orthodontics," and "Vitamins" were the search terms used to scour the database. The 10 studies selected for the systematic review and subsequent meta-analysis could not conclusively establish the correlation between proper nutrition and its impact on orthodontic treatment of the patient. There was virtually little connection between patients' dietary intake and the effectiveness of their orthodontic treatment. Additionally, a direct causal link between the two could not be established legitimately because the majority of the studies reviewed only noted an impact during the early stages of the treatment. PROSPERO Registration Number: CRD42022380828.
  12. Farook TH, Jamayet NB, Abdullah JY, Rajion ZA, Alam MK
    J Stomatol Oral Maxillofac Surg, 2020 Jun;121(3):268-277.
    PMID: 31610244 DOI: 10.1016/j.jormas.2019.10.003
    A systematic review was conducted in early 2019 to evaluate the articles published that dealt with digital workflow, CAD, rapid prototyping and digital image processing in the rehabilitation by maxillofacial prosthetics. The objective of the review was to primarily identify the recorded cases of orofacial rehabilitation made by maxillofacial prosthetics using computer assisted 3D printing. Secondary objectives were to analyze the methods of data acquisition recorded with challenges and limitations documented with various software in the workflow. Articles were searched from Scopus, PubMed and Google Scholar based on the predetermined eligibility criteria. Thirty-nine selected papers from 1992 to 2019 were then read and categorized according to type of prosthesis described in the papers. For nasal prostheses, Common Methods of data acquisition mentioned were computed tomography, photogrammetry and laser scanners. After image processing, computer aided design (CAD) was used to design and merge the prosthesis to the peripheral healthy tissue. Designing and printing the mold was more preferred. Moisture and muscle movement affected the overall fit especially for prostheses directly designed and printed. For auricular prostheses, laser scanning was most preferred. For unilateral defects, CAD was used to mirror the healthy tissue over to the defect side. Authors emphasized on the need of digital library for prostheses selection, especially for bilateral defects. Printing the mold and conventionally creating the prosthesis was most preferred due to issues of proper fit and color matching. Orbital prostheses follow a similar workflow as auricular prosthesis. 3D photogrammetry and laser scans were more preferred and directly printing the prosthesis was favored in various instance. However, ocular prostheses fabrication was recorded to be a challenge due to difficulties in appropriate volume reconstruction and inability to mirror healthy globe. Only successful cases of digitally designed and printed iris were noted.
  13. May Z, Alam MK, Nayan NA, Rahman NAA, Mahmud MS
    PLoS One, 2021;16(12):e0261040.
    PMID: 34914761 DOI: 10.1371/journal.pone.0261040
    Corrosion in carbon-steel pipelines leads to failure, which is a major cause of breakdown maintenance in the oil and gas industries. The acoustic emission (AE) signal is a reliable method for corrosion detection and classification in the modern Structural Health Monitoring (SHM) system. The efficiency of this system in detection and classification mainly depends on the suitable AE features. Therefore, many feature extraction and classification methods have been developed for corrosion detection and severity assessment. However, the extraction of appropriate AE features and classification of various levels of corrosion utilizing these extracted features are still challenging issues. To overcome these issues, this article proposes a hybrid machine learning approach that combines Wavelet Packet Transform (WPT) integrated with Fast Fourier Transform (FFT) for multiresolution feature extraction and Linear Support Vector Classifier (L-SVC) for predicting corrosion severity levels. A Laboratory-based Linear Polarization Resistance (LPR) test was performed on carbon-steel samples for AE data acquisition over a different time span. AE signals were collected at a high sampling rate with a sound well AE sensor using AEWin software. Simulation results show a linear relationship between the proposed approach-based extracted AE features and the corrosion process. For multi-class problems, three corrosion severity stages have been made based on the corrosion rate over time and AE activity. The ANOVA test results indicate the significance within and between the feature-groups where F-values (F-value>1) rejects the null hypothesis and P-values (P-value<0.05) are less than the significance level. The utilized L-SVC classifier achieves higher prediction accuracy of 99.0% than the accuracy of other benchmarked classifiers. Findings of our proposed machine learning approach confirm that it can be effectively utilized for corrosion detection and severity assessment in SHM applications.
  14. Bilgrami A, Alam MK, Qazi FUR, Maqsood A, Basha S, Ahmed N, et al.
    Polymers (Basel), 2022 Jan 24;14(3).
    PMID: 35160456 DOI: 10.3390/polym14030466
    A vital feature of conservative dentistry is the adhesion of the restorative material to the tooth structure for restoration of the tooth substance lost due to dental decay, trauma, or dental imperfections. In a perfect world, a restorative material should generate a lasting adhesion by bonding the restoration with tooth tissues. The ingress of micro-organisms, oral fluids, molecules, and ions through microscopic spaces due to faulty adhesion between restoration and tooth structure is known as microleakage. This study is focuses on the evaluation of adhesive failures between the restorative materials. In the past, studies have focused more on the bonding potential of a restorative material with the tooth surface. Therefore, there is need to carry out a study that compares the microleakage between resin-based restorative materials in a sandwich manner with and without the intermediate bonding layer after immersion in 2% methylene blue dye at different time intervals. The restorative materials used were composite Ceram X Mono plus (DENTSPLY) and Z350 (3M ESPE), Vitremer resin modified glass ionomer cement (RMGIC) (3M ESPE), smart dentine replacement SDR (3M ESPE), Bond NT (DENTSPLY), and Universal Bond (3M ESPE). A light emitting diode (LED) was used to cure the specimens. Artificial saliva was used as a storage medium for the specimens. Thermocycling of specimens was carried out at 500 cycles/30 s and 1000 cycles/30 s. The world health organization (WHO) grading tool for microleakage was used to analyze fluid ingress in the specimens through disclosing by 2% methylene blue dye. The statistical analysis was carried out with one-way analysis of variance (ANOVA) and Tukey post hoc test, keeping the level of significance at p ≤ 0.05. In Grade 0 = 85 samples, Grade 1 = 10 samples, Grade 2 = 7 samples, Grade 3 = 16 samples, and in Grade 4 = 2 samples were identified. This study describes that no microleakage was observed in SDR and resin composite groups as compared to Vitremer and resin composite groups.
  15. Haque S, Khamis MF, Alam MK, Ahmad WMAW
    J Craniofac Surg, 2021 May 01;32(3):964-966.
    PMID: 33405460 DOI: 10.1097/SCS.0000000000007366
    ABSTRACT: The aim of this study was to evaluate the effects of multiple factors (congenital and postnatal treatment factors) on the treatment outcome by assessing the maxillary arch dimension of children with unilateral cleft lip and palate (UCLP). Eighty-five Pakistani children with UCLP were taken who received cheiloplasty and palatoplasty. Laser scanned 3D digital models of UCLP subjects were prepared before any orthodontic treatment and bone grafting at 7.69 ± 2.46 (mean ± standard deviation) years of age. Inter-canine width (ICW), inter-molar width (IMW), and arch depth (AD) measurements of maxillary arch were measured with Mimics software. Multiple linear regression analyses were used to evaluate the association between congenital factors (age, gender, UCLP side, family history of cleft) and postnatal treatment factors (techniques of cheiloplasty and techniques of palatoplasty) with maxillary arch dimensions (ICW, IMW, and AD). P value was set at 5%. The mean (standard deviation) dimensions of ICW, IMW, and AD are 26.7 (5.70) mm, 43.3 (4.66) mm, and 27.1 (5.26) mm, respectively. There is no significant association found between multiple factors and maxillary arch dimensions. This regression analysis shows no significant association between multiple factors and MAD in this sample.
  16. May Z, Alam MK, Husain K, Hasan MK
    PLoS One, 2020;15(8):e0238073.
    PMID: 32845901 DOI: 10.1371/journal.pone.0238073
    Transmission opportunity (TXOP) is a key factor to enable efficient channel bandwidth utilization over wireless campus networks (WCN) for interactive multimedia (IMM) applications. It facilitates in resource allocation for the similar categories of multiple packets transmission until the allocated time is expired. The static TXOP limits are defined for various categories of IMM traffics in the IEEE802.11e standard. Due to the variation of traffic load in WCN, the static TXOP limits are not sufficient enough to guarantee the quality of service (QoS) for IMM traffic flows. In order to address this issue, several existing works allocate the TXOP limits dynamically to ensure QoS for IMM traffics based on the current associated queue size and pre-setting threshold values. However, existing works do not take into account all the medium access control (MAC) overheads while estimating the current queue size which in turn is required for dynamic TXOP limits allocation. Hence, not considering MAC overhead appropriately results in inaccurate queue size estimation, thereby leading to inappropriate allocation of dynamic TXOP limits. In this article, an enhanced dynamic TXOP (EDTXOP) scheme is proposed that takes into account all the MAC overheads while estimating current queue size, thereby allocating appropriate dynamic TXOP limits within the pre-setting threshold values. In addition, the article presents an analytical estimation of the EDTXOP scheme to compute the dynamic TXOP limits for the current high priority traffic queues. Simulation results were carried out by varying traffic load in terms of packet size and packet arrival rate. The results show that the proposed EDTXOP scheme achieves the overall performance gains in the range of 4.41%-8.16%, 8.72%-11.15%, 14.43%-32% and 26.21%-50.85% for throughput, PDR, average ETE delay and average jitter, respectively when compared to the existing work. Hence, offering a better TXOP limit allocation solution than the rest.
  17. Subhani N, May Z, Alam MK, Mamun S
    PLoS One, 2023;18(12):e0293097.
    PMID: 38060480 DOI: 10.1371/journal.pone.0293097
    In this paper, a non-isolated quadratic boost DC-DC converter has been proposed. The proposed converter provides high output voltage gain with a lower component count on the structure. In addition, the input side inductor provides continuous source current and the output voltage is positive. Since the proposed topology possesses the continuous source current, it simplifies the filter design at the input side further making the converter suitable for photovoltaic applications. Another important feature of this converter includes the utilization of the same switch ground that omits the additional control power supply in the system design. The detailed mathematical modeling of the proposed topology including the steady state analysis for different modes of operations, voltage stress calculations of the components, and power loss calculations have been precisely demonstrated in this work. The simulation has been carried out in Matlab/Simulink software. Finally, a 250 W experimental prototype has been developed and tested in the laboratory environment and the peak efficiency of the proposed topology has been found 92% at 50% duty cycle, which validates the correctness of the theoretical and simulation outcomes of the proposed work.
  18. Asif JA, Pohchi A, Alam MK, Athar Y, Shiekh RA
    Indian J Ophthalmol, 2014 Nov;62(11):1098-1100.
    PMID: 25494256 DOI: 10.4103/0301-4738.146756
  19. Haque S, Alam MK, Arshad AI
    Malays J Med Sci, 2015 Jan-Feb;22(1):4-11.
    PMID: 25892945 MyJurnal
    In the contemporary era, the demand for orthodontic treatment is ever rising. Orthodontic treatment duration can range from a year to a few years. Our aim is to assess the available techniques of categorising treatment effectiveness in patients with cleft lip and palate (CLP) and to study their effect on improvement of treatment outcomes. The electronic databases including Medline-PUBMED, Science Direct, and ISI Web of Knowledge were searched from 1987 to 2013, and 40 311 relevant articles were found. Of these, we identified 22 articles including original articles as well as literature reviews. The different parameters and indices that are applied to speed-up orthodontic treatment outcomes in patients with CLP were identified as the GOSLON Yardstick, 5-year-old index, EUROCRAN index, Huddart Bodenham system, modified Huddart Bodenham system, GOAL Yardstick and, Bauru-Bilateral Cleft Lip and Palate Yardstick. This overview can create better awareness regarding the uses, advantages, and disadvantages of the different indices. It can enable better assessment and provide the impetus needed for a sustained upgrade in the standards of care for CLP in daily orthodontics.
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links