Displaying all 5 publications

Abstract:
Sort:
  1. Amin NAS, Talebian-Kiakalaieh A
    Waste Manag, 2018 Mar;73:256-264.
    PMID: 29150259 DOI: 10.1016/j.wasman.2017.11.019
    As the world's second largest palm oil producer and exporter, Malaysia could capitalize on its oil palm biomass waste for power generation. The emission factors from this renewable energy source are far lower than that of fossil fuels. This study applies an integrated carbon accounting and mitigation (INCAM) model to calculate the amount of CO2 emissions from two biomass thermal power plants. The CO2 emissions released from biomass plants utilizing empty fruit bunch (EFB) and palm oil mill effluent (POME), as alternative fuels for powering steam and gas turbines, were determined using the INCAM model. Each section emitting CO2 in the power plant, known as the carbon accounting center (CAC), was measured for its carbon profile (CP) and carbon index (CI). The carbon performance indicator (CPI) included electricity, fuel and water consumption, solid waste and waste-water generation. The carbon emission index (CEI) and carbon emission profile (CEP), based on the total monthly carbon production, were determined across the CPI. Various innovative strategies resulted in a 20%-90% reduction of CO2 emissions. The implementation of reduction strategies significantly reduced the CO2 emission levels. Based on the model, utilization of EFB and POME in the facilities could significantly reduce the CO2 emissions and increase the potential for waste to energy initiatives.
  2. Nik Mohd Rosdy NMM, Mohd Amin NAS, Roslan N
    Int J Dent, 2023;2023:9924186.
    PMID: 36845626 DOI: 10.1155/2023/9924186
    OBJECTIVES: This study aims to identify the pH level and subsequently the erosive potential of beverages including their sugar content.

    MATERIALS AND METHODS: Beverages were purchased from a local convenience store, and some of the beverages were freshly prepared. The acidity of each beverage was identified using a calibrated pH meter. The pH was obtained in triplicate, and the results were expressed in average values with standard deviations. The pH values were then used to determine their erosive potential and the sugar content was obtained from the packaging and recorded.

    RESULTS: A total of 167 beverages were purchased and categorized. The beverages were categorized into 15 groups: milk tea, hawker drinks, instant drinks, fresh fruit juices, milk, energy drinks, designer coffee, soda, canned drinks, cultured milk, vegetable juices, cordials, bottled fruit drinks, tea, and mineral water. The pH value ranges from 2.65 to 7.85. Seven beverages (4.2%) were classified as extremely erosive, 53 beverages (31.1%) were classified as erosive, and 36 beverages (21.6%) were classified as minimally erosive. In total, 57.5% of the beverages were potentially erosive, and most of the soda and energy drinks were erosive. The highest sugar content per 100 g was BOH Teh Tarik Original (71.8 g), whereas the highest sugar content per serving was Carabao energy drink (10.8 g).

    CONCLUSION: High sugar content and low acidic content of beverages could have a negative impact on the dentition. An intervention is required from a public health perspective to regulate the consumption of sweetened and flavored beverages.

  3. Talebian-Kiakalaieh A, Amin NAS, Najaafi N, Tarighi S
    Front Chem, 2018;6:573.
    PMID: 30534550 DOI: 10.3389/fchem.2018.00573
    The last 20 years have seen an unprecedented breakthrough in the biodiesel industry worldwide leads to abundance of glycerol. Therefore, the economic utilization of glycerol to various value-added chemicals is vital for the sustainability of the biodiesel industry. One of the promising processes is acetalization of glycerol to acetals and ketals for applications as fuel additives. These products could be obtained by acid-catalyzed reaction of glycerol with aldehydes and ketones. Application of different supported heterogeneous catalysts such as zeolites, heteropoly acids, metal-based and acid-exchange resins have been evaluated comprehensively in this field. In this review, the glycerol acetalization has been reported, focusing on innovative and potential technologies for sustainable production of solketal. In addition, the impacts of various parameters such as application of different reactants, reaction temperature, water removal, utilization of crude-glycerol on catalytic activity in both batch and continuous processes are discussed. The outcomes of this research will therefore significantly improve the technology required in tomorrow's bio-refineries. This review provides spectacular opportunities for us to use such renewables and will consequently benefit the industry, environment and economy.
  4. Wong S, Ghafar NA, Ngadi N, Razmi FA, Inuwa IM, Mat R, et al.
    Sci Rep, 2020 02 19;10(1):2928.
    PMID: 32076087 DOI: 10.1038/s41598-020-60021-6
    Adsorption of Reactive Black 5 and Congo Red from aqueous solution by coffee waste modified with polyethylenimine was investigated. The removal percentages of both dyes increased with amount of polyethyleneimine in the modified adsorbent. Characterization revealed that polyethyleneimine modification improved the adsorbent surface chemistry, while slight improvement of adsorbent textural properties was also observed. The adsorbent's excellent performance was demonstrated by high removal percentages towards the anionic dyes in most experimental runs. The modelling result showed that anionic dyes adsorption occurred via monolayer adsorption, and chemisorption was the rate-controlling step. The adsorbent possesses higher maximum adsorption capacity towards Reactive Black 5 (77.52 mg/g) than Congo Red (34.36 mg/g), due to the higher number of functional groups in Reactive Black 5 that interact with the adsorbent. This study reveals the potential of adsorbent derived from coffee waste in textile wastewater treatment. Furthermore, surface chemistry modification is proven as an effective strategy to enhance the performance of biowaste-derived adsorbents.
  5. Wong S, Mah AXY, Nordin AH, Nyakuma BB, Ngadi N, Mat R, et al.
    Environ Sci Pollut Res Int, 2020 Mar;27(8):7757-7784.
    PMID: 32020458 DOI: 10.1007/s11356-020-07933-y
    The rapidly increasing generation of municipal solid waste (MSW) threatens the environmental integrity and well-being of humans at a global level. Incineration is regarded as a technically sound technology for the management of MSW. However, the effective management of the municipal solid waste incineration (MSWI) ashes remains a challenge. This article presents the global dynamics of MSWI ashes research from 1994 to 2018 based on a bibliometric analysis of 1810 publications (research articles and conference proceedings) extracted from the Web of Science database, followed by a comprehensive summary on the research developments in the field. The results indicate the rapid growth of annual publications on MSWI ashes research, with China observed as the most productive country within the study period. Waste Management, Journal of Hazardous Materials, Chemosphere and Waste Management & Research, which accounted for 35.42% of documents on MSWI research, are the most prominent journals in the field. The most critical thematic areas on this topic are MSWI ashes characterisation, dioxin emissions from fly ash, valorisation of bottom ash and heavy metal removal. The evolution of MSWI ashes treatment technologies is also discussed, together with the challenges and future research directions. This is the first bibliometric analysis on global MSWI ashes research based on a sufficiently large dataset, which could provide new insights for researchers to initiate further research with leading institutions/authors and ultimately advance this research field.
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links