Displaying all 7 publications

Abstract:
Sort:
  1. Li JJ, Yeo KK, Tan K, Ako J, Krittayaphong R, Tan RS, et al.
    Am J Prev Cardiol, 2020 Dec;4:100096.
    PMID: 34327472 DOI: 10.1016/j.ajpc.2020.100096
    With the global spread of abdominal obesity, cardiovascular disease continues to spread to all countries of the world. Given the large population, the challenges presented by cardiometabolic risk in the Asia Pacific region are considerable. In addition to the clinical consequences of cardiovascular disease, in terms of its morbidity and mortality, the diversity of the Asia Pacific region brings heterogeneity in approaches to prevention, diagnosis and treatment of cardiometabolic risk. In this manuscript, we will review the current state of knowledge of cardiometabolic risk in Asia Pacific and highlight the needs moving forward to tackle this public health challenge.
  2. Klionsky DJ, Abdel-Aziz AK, Abdelfatah S, Abdellatif M, Abdoli A, Abel S, et al.
    Autophagy, 2021 Jan;17(1):1-382.
    PMID: 33634751 DOI: 10.1080/15548627.2020.1797280
    In 2008, we published the first set of guidelines for standardizing research in autophagy. Since then, this topic has received increasing attention, and many scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Thus, it is important to formulate on a regular basis updated guidelines for monitoring autophagy in different organisms. Despite numerous reviews, there continues to be confusion regarding acceptable methods to evaluate autophagy, especially in multicellular eukaryotes. Here, we present a set of guidelines for investigators to select and interpret methods to examine autophagy and related processes, and for reviewers to provide realistic and reasonable critiques of reports that are focused on these processes. These guidelines are not meant to be a dogmatic set of rules, because the appropriateness of any assay largely depends on the question being asked and the system being used. Moreover, no individual assay is perfect for every situation, calling for the use of multiple techniques to properly monitor autophagy in each experimental setting. Finally, several core components of the autophagy machinery have been implicated in distinct autophagic processes (canonical and noncanonical autophagy), implying that genetic approaches to block autophagy should rely on targeting two or more autophagy-related genes that ideally participate in distinct steps of the pathway. Along similar lines, because multiple proteins involved in autophagy also regulate other cellular pathways including apoptosis, not all of them can be used as a specific marker for bona fide autophagic responses. Here, we critically discuss current methods of assessing autophagy and the information they can, or cannot, provide. Our ultimate goal is to encourage intellectual and technical innovation in the field.
  3. Klionsky DJ, Abdelmohsen K, Abe A, Abedin MJ, Abeliovich H, Acevedo Arozena A, et al.
    Autophagy, 2016;12(1):1-222.
    PMID: 26799652 DOI: 10.1080/15548627.2015.1100356
  4. Li JJ, Liu HH, Wu NQ, Yeo KK, Tan K, Ako J, et al.
    Expert Opin Drug Metab Toxicol, 2020 Sep;16(9):837-851.
    PMID: 32729743 DOI: 10.1080/17425255.2020.1802426
    INTRODUCTION: Statins have been established as the standard of care for dyslipidemia and preventing cardiovascular diseases while posing few safety concerns. However, misconceptions about statin intolerance lead to their underuse, indicating a need to improve the understanding of the safety of this treatment.

    AREAS COVERED: We searched PubMed and reviewed literatures related to statin intolerance published between February 2015 and February 2020. Important large-scale or landmark studies published before 2015 were also cited as key evidence.

    EXPERT OPINION: Optimal lowering of low-density lipoprotein cholesterol with statins substantially reduces the risk of cardiovascular events. Muscle adverse events (AEs) were the most frequently reported AEs by statin users in clinical practice, but they usually occurred at a similar rate with statins and placebo in randomized controlled trials and had a spurious causal relationship with statin treatment. We proposed a rigorous definition for identifying true statin intolerance and present the criteria for defining different forms of muscle AEs and an algorithm for their management. True statin intolerance is uncommon, and every effort should be made to exclude false statin intolerance and ensure optimal use of statins. For the management of statin intolerance, statin-based approaches should be prioritized over non-statin approaches.

  5. Tada H, Yeo KK, Li JJ, Tan K, Ako J, Krittayaphong R, et al.
    JACC Asia, 2021 Dec;1(3):294-302.
    PMID: 36341217 DOI: 10.1016/j.jacasi.2021.08.008
    Approximately one-half of the phenotypic susceptibility to atherosclerotic cardiovascular disease (ASCVD) has a genetic basis. Although individual allelic variants generally impart a small effect on risk for ASCVD, an emerging body of data has shown that the aggregation and weighting of many of these genetic variations into "scores" can further discriminate an individual's risk beyond traditional risk factors alone. Consistent with the theory of population genetics, such polygenic risk scores (PRS) appear to be ethnicity specific because their elements comprise single-nucleotide variants that are always ethnicity specific. The currently available PRS are derived predominantly from European ancestry and thus predictably perform less well among non-European participants, a fact that has implications for their use in the Asia-Pacific region. This paper describes the current state of knowledge of PRS, the available data that support their use in this region, and highlights the needs moving forward to safely and effectively implement them in clinical care in the Asia-Pacific region.
  6. Jerome JTJ, Mercier F, Mudgal CS, Arenas-Prat J, Vinagre G, Goorens CK, et al.
    J Hand Microsurg, 2020 Dec;12(3):135-162.
    PMID: 33408440 DOI: 10.1055/s-0040-1713964
    With a lot of uncertainty, unclear, and frequently changing management protocols, COVID-19 has significantly impacted the orthopaedic surgical practice during this pandemic crisis. Surgeons around the world needed closed introspection, contemplation, and prospective consensual recommendations for safe surgical practice and prevention of viral contamination. One hundred orthopaedic surgeons from 50 countries were sent a Google online form with a questionnaire explicating protocols for admission, surgeries, discharge, follow-up, relevant information affecting their surgical practices, difficulties faced, and many more important issues that happened during and after the lockdown. Ten surgeons critically construed and interpreted the data to form rationale guidelines and recommendations. Of the total, hand and microsurgery surgeons (52%), trauma surgeons (32%), joint replacement surgeons (20%), and arthroscopy surgeons (14%) actively participated in the survey. Surgeons from national public health care/government college hospitals (44%) and private/semiprivate practitioners (54%) were involved in the study. Countries had lockdown started as early as January 3, 2020 with the implementation of partial or complete lifting of lockdown in few countries while writing this article. Surgeons (58%) did not stop their surgical practice or clinics but preferred only emergency cases during the lockdown. Most of the surgeons (49%) had three-fourths reduction in their total patients turn-up and the remaining cases were managed by conservative (54%) methods. There was a 50 to 75% reduction in the number of surgeries. Surgeons did perform emergency procedures without COVID-19 tests but preferred reverse transcription polymerase chain reaction (RT-PCR; 77%) and computed tomography (CT) scan chest (12%) tests for all elective surgical cases. Open fracture and emergency procedures (60%) and distal radius (55%) fractures were the most commonly performed surgeries. Surgeons preferred full personal protection equipment kits (69%) with a respirator (N95/FFP3), but in the case of unavailability, they used surgical masks and normal gowns. Regional/local anesthesia (70%) remained their choice for surgery to prevent the aerosolized risk of contaminations. Essential surgical follow-up with limited persons and visits was encouraged by 70% of the surgeons, whereas teleconsultation and telerehabilitation by 30% of the surgeons. Despite the protective equipment, one-third of the surgeons were afraid of getting infected and 56% feared of infecting their near and dear ones. Orthopaedic surgeons in private practice did face 50 to 75% financial loss and have to furlough 25% staff and 50% paramedical persons. Orthopaedics meetings were cancelled, and virtual meetings have become the preferred mode of sharing the knowledge and experiences avoiding human contacts. Staying at home, reading, and writing manuscripts became more interesting and an interesting lifestyle change is seen among the surgeons. Unanimously and without any doubt all accepted the fact that COVID-19 pandemic has reached an unprecedented level where personal hygiene, hand washing, social distancing, and safe surgical practices are the viable antidotes, and they have all slowly integrated these practices into their lives. Strict adherence to local authority recommendations and guidelines, uniform and standardized norms for admission, inpatient, and discharge, mandatory RT-PCR tests before surgery and in selective cases with CT scan chest, optimizing and regularizing the surgeries, avoiding and delaying nonemergency surgeries and follow-up protocols, use of teleconsultations cautiously, and working in close association with the World Health Organization and national health care systems will provide a conducive and safe working environment for orthopaedic surgeons and their fraternity and also will prevent the resurgence of COVID-19.
  7. Chua BL, Baek SH, Park K, Ahn DG
    Materials (Basel), 2021 Jun 19;14(12).
    PMID: 34205426 DOI: 10.3390/ma14123404
    Three-dimensional prototypes and final products are commonly fabricated using the material extrusion (ME) process in additive manufacturing applications. However, these prototypes and products are limited to a single material using the ME process due to technical challenges. Deposition of plastic on another dissimilar plastic substrate requires proper control of printing temperature during an ME process due to differences in melting temperatures of dissimilar plastics. In this paper, deposition of PLA filament on an ABS substrate during an ME process is investigated using finite element analysis. A heat transfer finite element (FE) model for the extrusion process is proposed to estimate the parameters of the ME machine for the formulation of a heat flux model. The effects of printing temperature and the stand-off distance on temperature distributions are investigated using the proposed FE model for the extrusion process. The heat flux model is implemented in a proposed heat transfer FE model of single bead deposition of PLA on an ABS plate. From this FE model of deposition, temperature histories during the ME deposition process are estimated. The results of temperature histories are compared with experiments. Using the calibrated FE model, a proper heating temperature of ABS for deposition of PLA is evaluated.
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links