Displaying all 10 publications

Abstract:
Sort:
  1. Chowdhury MA, Shuvho MBA, Shahid MA, Haque AKMM, Kashem MA, Lam SS, et al.
    Environ Res, 2021 Jan;192:110294.
    PMID: 33022215 DOI: 10.1016/j.envres.2020.110294
    The rapid spread of COVID-19 has led to nationwide lockdowns in many countries. The COVID-19 pandemic has played serious havoc on economic activities throughout the world. Researchers are immensely curious about how to give the best protection to people before a vaccine becomes available. The coronavirus spreads principally through saliva droplets. Thus, it would be a great opportunity if the virus spread could be controlled at an early stage. The face mask can limit virus spread from both inside and outside the mask. This is the first study that has endeavoured to explore the design and fabrication of an antiviral face mask using licorice root extract, which has antimicrobial properties due to glycyrrhetinic acid (GA) and glycyrrhizin (GL). An electrospinning process was utilized to fabricate nanofibrous membrane and virus deactivation mechanisms discussed. The nanofiber mask material was characterized by SEM and airflow rate testing. SEM results indicated that the nanofibers from electrospinning are about 15-30 μm in diameter with random porosity and orientation which have the potential to capture and kill the virus. Theoretical estimation signifies that an 85 L/min rate of airflow through the face mask is possible which ensures good breathability over an extensive range of pressure drops and pore sizes. Finally, it can be concluded that licorice root membrane may be used to produce a biobased face mask to control COVID-19 spread.
  2. James SL, Castle CD, Dingels ZV, Fox JT, Hamilton EB, Liu Z, et al.
    Inj Prev, 2020 10;26(Supp 1):i96-i114.
    PMID: 32332142 DOI: 10.1136/injuryprev-2019-043494
    BACKGROUND: Past research in population health trends has shown that injuries form a substantial burden of population health loss. Regular updates to injury burden assessments are critical. We report Global Burden of Disease (GBD) 2017 Study estimates on morbidity and mortality for all injuries.

    METHODS: We reviewed results for injuries from the GBD 2017 study. GBD 2017 measured injury-specific mortality and years of life lost (YLLs) using the Cause of Death Ensemble model. To measure non-fatal injuries, GBD 2017 modelled injury-specific incidence and converted this to prevalence and years lived with disability (YLDs). YLLs and YLDs were summed to calculate disability-adjusted life years (DALYs).

    FINDINGS: In 1990, there were 4 260 493 (4 085 700 to 4 396 138) injury deaths, which increased to 4 484 722 (4 332 010 to 4 585 554) deaths in 2017, while age-standardised mortality decreased from 1079 (1073 to 1086) to 738 (730 to 745) per 100 000. In 1990, there were 354 064 302 (95% uncertainty interval: 338 174 876 to 371 610 802) new cases of injury globally, which increased to 520 710 288 (493 430 247 to 547 988 635) new cases in 2017. During this time, age-standardised incidence decreased non-significantly from 6824 (6534 to 7147) to 6763 (6412 to 7118) per 100 000. Between 1990 and 2017, age-standardised DALYs decreased from 4947 (4655 to 5233) per 100 000 to 3267 (3058 to 3505).

    INTERPRETATION: Injuries are an important cause of health loss globally, though mortality has declined between 1990 and 2017. Future research in injury burden should focus on prevention in high-burden populations, improving data collection and ensuring access to medical care.

  3. James SL, Castle CD, Dingels ZV, Fox JT, Hamilton EB, Liu Z, et al.
    Inj Prev, 2020 Oct;26(Supp 1):i125-i153.
    PMID: 32839249 DOI: 10.1136/injuryprev-2019-043531
    BACKGROUND: While there is a long history of measuring death and disability from injuries, modern research methods must account for the wide spectrum of disability that can occur in an injury, and must provide estimates with sufficient demographic, geographical and temporal detail to be useful for policy makers. The Global Burden of Disease (GBD) 2017 study used methods to provide highly detailed estimates of global injury burden that meet these criteria.

    METHODS: In this study, we report and discuss the methods used in GBD 2017 for injury morbidity and mortality burden estimation. In summary, these methods included estimating cause-specific mortality for every cause of injury, and then estimating incidence for every cause of injury. Non-fatal disability for each cause is then calculated based on the probabilities of suffering from different types of bodily injury experienced.

    RESULTS: GBD 2017 produced morbidity and mortality estimates for 38 causes of injury. Estimates were produced in terms of incidence, prevalence, years lived with disability, cause-specific mortality, years of life lost and disability-adjusted life-years for a 28-year period for 22 age groups, 195 countries and both sexes.

    CONCLUSIONS: GBD 2017 demonstrated a complex and sophisticated series of analytical steps using the largest known database of morbidity and mortality data on injuries. GBD 2017 results should be used to help inform injury prevention policy making and resource allocation. We also identify important avenues for improving injury burden estimation in the future.

  4. Rashid MH, Fardous Z, Chowdhury MA, Alam MK, Bari ML, Moniruzzaman M, et al.
    Chem Cent J, 2016;10:7.
    PMID: 26900397 DOI: 10.1186/s13065-016-0154-3
    BACKGROUND: The aim of this study was to determine the levels of cadmium (Cd), chromium (Cr), lead (Pb), arsenic (As) and selenium (Se) in (1) fresh tea leaves, (2) processed (black) tea leaves and (3) soils from tea plantations originating from Bangladesh.

    METHODS: Graphite furnace atomic absorption spectrometry (GF-AAS) was used to evaluate six digestion methods, (1) nitric acid, (2) nitric acid overnight, (3) nitric acid-hydrogen peroxide, (4) nitric-perchloric acid, (5) sulfuric acid, and (6) dry ashing, to determine the most suitable digestion method for the determination of heavy metals in the samples.

    RESULTS: The concentration ranges of Cd, Pb, As and Se in fresh tea leaves were from 0.03-0.13, 0.19-2.06 and 0.47-1.31 µg/g, respectively while processed tea contained heavy metals at different concentrations: Cd (0.04-0.16 µg/g), Cr (0.45-10.73 µg/g), Pb (0.07-1.03 µg/g), As (0.89-1.90 µg/g) and Se (0.21-10.79 µg/g). Moreover, the soil samples of tea plantations also showed a wide range of concentrations: Cd (0.11-0.45 µg/g), Pb (2.80-66.54 µg/g), As (0.78-4.49 µg/g), and Se content (0.03-0.99 µg/g). Method no. 2 provided sufficient time to digest the tea matrix and was the most efficient method for recovering Cd, Cr, Pb, As and Se. Methods 1 and 3 were also acceptable and can be relatively inexpensive, easy and fast. The heavy metal transfer factors in the investigated soil/tea samples decreased as follows: Cd > As > Se > Pb.

    CONCLUSION: Overall, the present study gives current insights into the heavy metal levels both in soils and teas commonly consumed in Bangladesh.

  5. Sarker N, Chowdhury MA, Fakhruddin AN, Fardous Z, Moniruzzaman M, Gan SH
    Biomed Res Int, 2015;2015:720341.
    PMID: 26618176 DOI: 10.1155/2015/720341
    The present study was undertaken to determine the heavy metal levels and the physicochemical parameters (pH, electrical conductivity (EC), and ash, moisture, and total sugar content) of honeys from Bangladesh. Three different floral honeys were investigated, namely, khalsi (Aegiceras corniculatum), mustard (Brassica juncea), and litchi (Litchi chinensis) honeys. The heavy metals in the honeys were determined by using a High Temperature Dry Oxidation method followed by Atomic Absorption Spectroscopy. The mean pH, EC, and ash, moisture, and total sugar contents of the investigated honeys were 3.6, 0.51 mS/cm, 0.18%, 18.83%, and 68.30%, respectively. Iron was the most abundant among all the investigated heavy metals, ranging from 13.51 to 15.44 mg/kg. The mean concentrations of Mn and Zn in the investigated honeys were 0.28 mg/kg and 2.99 mg/kg, respectively. Cd was below the detection limit, and lead was found in some honey samples, but their contents were below the recommended Maximum Acceptable Level. Cr was also found in all of the samples, but its concentration was within the limit. The physicochemical analysis of the honey samples yielded levels within the limits set by the international honey legislation, indicating that the honey samples were of good quality and had acceptable values for maturity, purity, and freshness.
  6. Rahman K, Abdul Ghani N, Kamil AA, Mustafa A, Chowdhury MA
    PLoS One, 2015;10(7):e0133229.
    PMID: 26196124 DOI: 10.1371/journal.pone.0133229
    Pedestrian overflow causes queuing delay and in turn, is controlled by the capacity of a facility. Flow control or blocking control takes action to avoid queues from building up to extreme values. Thus, in this paper, the problem of pedestrian flow control in open outdoor walking facilities in equilibrium condition is investigated using M/M/c/K queuing models. State dependent service rate based on speed and density relationship is utilized. The effective rate of the Poisson arrival process to the facility is determined so as there is no overflow of pedestrians. In addition, the use of the state dependent queuing models to the design of the facilities and the effect of pedestrian personal capacity on the design and the traffic congestion are discussed. The study does not validate the sustainability of adaptation of Western design codes for the pedestrian facilities in the countries like Bangladesh.
  7. Moniruzzaman M, Chowdhury MA, Rahman MA, Sulaiman SA, Gan SH
    Biomed Res Int, 2014;2014:359890.
    PMID: 24982869 DOI: 10.1155/2014/359890
    The present study was undertaken to determine the content of six minerals, five trace elements, and ten pesticide residues in honeys originating from different regions of Malaysia. Calcium (Ca), magnesium (Mg), iron (Fe), and zinc (Zn) were analyzed by flame atomic absorption spectrometry (FAAS), while sodium (Na) and potassium (K) were analyzed by flame emission spectrometry (FAES). Trace elements such as arsenic (As), lead (Pb), cadmium (Cd), copper (Cu), and cobalt (Co) were analyzed by graphite furnace atomic absorption spectrometry (GFAAS) following the microwave digestion of honey. High mineral contents were observed in the investigated honeys with K, Na, Ca, and Fe being the most abundant elements (mean concentrations of 1349.34, 236.80, 183.67, and 162.31 mg/kg, resp.). The concentrations of the trace elements were within the recommended limits, indicating that the honeys were of good quality. Principal component analysis reveals good discrimination between the different honey samples. The pesticide analysis for the presence of organophosphorus and carbamates was performed by high performance liquid chromatography (HPLC). No pesticide residues were detected in any of the investigated honey samples, indicating that the honeys were pure. Our study reveals that Malaysian honeys are rich sources of minerals with trace elements present within permissible limits and that they are free from pesticide contamination.
  8. Chowdhury MA, Jahan I, Karim N, Alam MK, Abdur Rahman M, Moniruzzaman M, et al.
    Biomed Res Int, 2014;2014:145159.
    PMID: 24711991 DOI: 10.1155/2014/145159
    In the present study, the residual pesticide levels were determined in eggplants (Solanum melongena) (n = 16), purchased from four different markets in Dhaka, Bangladesh. The carbamate and organophosphorus pesticide residual levels were determined by high performance liquid chromatography (HPLC), and the efficiency of gamma radiation on pesticide removal in three different types of vegetables was also studied. Many (50%) of the samples contained pesticides, and three samples had residual levels above the maximum residue levels determined by the World Health Organisation. Three carbamates (carbaryl, carbofuran, and pirimicarb) and six organophosphates (phenthoate, diazinon, parathion, dimethoate, phosphamidon, and pirimiphos-methyl) were detected in eggplant samples; the highest carbofuran level detected was 1.86 mg/kg, while phenthoate was detected at 0.311 mg/kg. Gamma radiation decreased pesticide levels proportionately with increasing radiation doses. Diazinon, chlorpyrifos, and phosphamidon were reduced by 40-48%, 35-43%, and 30-45%, respectively, when a radiation strength of 0.5 kGy was utilized. However, when the radiation dose was increased to 1.0 kGy, the levels of the pesticides were reduced to 85-90%, 80-91%, and 90-95%, respectively. In summary, our study revealed that pesticide residues are present at high amounts in vegetable samples and that gamma radiation at 1.0 kGy can remove 80-95% of some pesticides.
  9. Rahman K, Ghani NA, Kamil AA, Mustafa A, Kabir Chowdhury MA
    PLoS One, 2013;8(5):e63503.
    PMID: 23691055 DOI: 10.1371/journal.pone.0063503
    Pedestrian movements are the consequence of several complex and stochastic facts. The modelling of pedestrian movements and the ability to predict the travel time are useful for evaluating the performance of a pedestrian facility. However, only a few studies can be found that incorporate the design of the facility, local pedestrian body dimensions, the delay experienced by the pedestrians, and level of service to the pedestrian movements. In this paper, a queuing based analytical model is developed as a function of relevant determinants and functional factors to predict the travel time on pedestrian facilities. The model can be used to assess the overall serving rate or performance of a facility layout and correlate it to the level of service that is possible to provide the pedestrians. It has also the ability to provide a clear suggestion on the designing and sizing of pedestrian facilities. The model is empirically validated and is found to be a robust tool to understand how well a particular walking facility makes possible comfort and convenient pedestrian movements. The sensitivity analysis is also performed to see the impact of some crucial parameters of the developed model on the performance of pedestrian facilities.
  10. Ahasan HA, Chowdhury MA, Azhar MA, Rafiqueuddin AK, Azad KA
    Med J Malaysia, 1996 Mar;51(1):29-32.
    PMID: 10967976
    Twenty-seven out of five hundred and fifty three patients hospitalized for visceral leishmaniasis (Kala-azar) died during treatment with sodium antimony gluconate. Data from these patients were evaluated to find out the cause of death. Eight patients had associated diseases such as pulmonary tuberculosis (3), severe malnutrition (1), acute gastroenteritis (1), spleenic infarction (1), acute renal failure (1) and atrial septal defect (1) which could be attributed to death. Twelve patients developed spontaneous haemorrhages from nose, gums and gastrointestinal tract and died, despite of adequate supportive measures. Seven other patients who were improving slowly with antimony therapy died unexpectedly. Though, cause of death could be explained in some patients with associated disease conditions, it could not be explained in others as significant clinical manifestations, haematological, biochemical and electrocardiographic alterations were not evident prior to death. Our impression is that mortality in Kala-azar patients during standard antimonial therapy is more related to the drug rather than the disease process.
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links