Displaying all 10 publications

Abstract:
Sort:
  1. Tong WK, Dai C, Hu J, Li J, Gao MT, You X, et al.
    Sci Total Environ, 2024 Jan 10;907:168099.
    PMID: 37884130 DOI: 10.1016/j.scitotenv.2023.168099
    Nanobubbles (NBs), given their unique properties, could theoretically be paired with rhamnolipids (RL) to tackle polycyclic aromatic hydrocarbon contamination in groundwater. This approach may overcome the limitations of traditional surfactants, such as high toxicity and low efficiency. In this study, the remediation efficiency of RL, with or without NBs, was assessed through soil column experiments (soil contaminated with phenanthrene). Through the analysis of the two-site non-equilibrium diffusion model, there was a synergistic effect between NBs and RL. The introduction of NBs led to a reduction of up to 24.3 % in the total removal time of phenanthrene. The direct reason for this was that with NBs, the retardation factor of RL was reduced by 1.9 % to 15.4 %, which accelerated the solute replacement of RL. The reasons for this synergy were multifaceted. Detailed analysis reveals that NBs improve RL's colloidal stability, increase its absolute zeta potential, and reduce its soil adsorption capacity by 13.3 %-19.9 %. Furthermore, NBs and their interaction with RL substantially diminish the surface tension, contact angle, and dynamic viscosity of the leaching solution. These changes in surface thermodynamic and rheological properties significantly enhance the migration efficiency of the eluent. The research outcomes facilitate a thorough comprehension of NBs' attributes and their relevant applications, and propose an eco-friendly method to improve the efficiency of surfactant remediation.
  2. Zou JJ, Dai C, Hu J, Tong WK, Gao MT, Zhang Y, et al.
    Sci Total Environ, 2024 Apr 20;922:171201.
    PMID: 38417506 DOI: 10.1016/j.scitotenv.2024.171201
    Mycelial pellets formed by Penicillium thomii ZJJ were applied as efficient biosorbents for the removal of polycyclic aromatic hydrocarbons (PAHs), which are a type of ubiquitous harmful hydrophobic pollutants. The live mycelial pellets were able to remove 93.48 % of pyrene at a concentration of 100 mg/L within 48 h, demonstrating a maximum adsorption capacity of 285.63 mg/g. Meanwhile, the heat-killed one also achieved a removal rate of 65.01 %. Among the six typical PAHs (pyrene, phenanthrene, fluorene, anthracene, fluoranthene, benzo[a]pyrene), the mycelial pellets preferentially adsorbed the high molecular weight PAHs, which also have higher toxicity, resulting in higher removal efficiency. The experimental results showed that the biosorption of mycelial pellets was mainly a spontaneous physical adsorption process that occurred as a monolayer on a homogeneous surface, with mass transfer being the key rate-limiting step. The main adsorption sites on the surface of mycelia were carboxyl and N-containing groups. Extracellular polymeric substances (EPS) produced by mycelial pellets could enhance adsorption, and its coupling with dead mycelia could achieve basically the same removal effect to that of living one. It can be concluded that biosorption by mycelial pellets occurred due to the influence of electrostatic and hydrophobic interactions, consisting of five steps. Furthermore, the potential applicability of mycelial pellets has been investigated considering diverse factors. The mycelia showed high environmental tolerance, which could effectively remove pyrene across a wide range of pH and salt concentration. And pellets diameters and humic acid concentration had a significant effect on microbial adsorption effect. Based on a cost-effectiveness analysis, mycelium pellets were found to be a low-cost adsorbent. The research outcomes facilitate a thorough comprehension of the adsorption process of pyrene by mycelial pellets and their relevant applications, proposing a cost-effective method without potential environmental issues (heat-killed mycelial pellets plus EPS) to removal PAHs.
  3. Sun DQ, Targher G, Byrne CD, Wheeler DC, Wong VW, Fan JG, et al.
    Hepatobiliary Surg Nutr, 2023 Jun 01;12(3):386-403.
    PMID: 37351121 DOI: 10.21037/hbsn-22-421
    BACKGROUND: With the rising global prevalence of fatty liver disease related to metabolic dysfunction, the association of this common liver condition with chronic kidney disease (CKD) has become increasingly evident. In 2020, the more inclusive term metabolic dysfunction-associated fatty liver disease (MAFLD) was proposed to replace the term non-alcoholic fatty liver disease (NAFLD). The observed association between MAFLD and CKD and our understanding that CKD can be a consequence of underlying metabolic dysfunction support the notion that individuals with MAFLD are at higher risk of having and developing CKD compared with those without MAFLD. However, to date, there is no appropriate guidance on CKD in individuals with MAFLD. Furthermore, there has been little attention paid to the link between MAFLD and CKD in the Nephrology community.

    METHODS AND RESULTS: Using a Delphi-based approach, a multidisciplinary panel of 50 international experts from 26 countries reached a consensus on some of the open research questions regarding the link between MAFLD and CKD.

    CONCLUSIONS: This Delphi-based consensus statement provided guidance on the epidemiology, mechanisms, management and treatment of MAFLD and CKD, as well as the relationship between the severity of MAFLD and risk of CKD, which establish a framework for the early prevention and management of these two common and interconnected diseases.

  4. You X, Liu S, Dai C, Zhong G, Duan Y, Guo Y, et al.
    Environ Sci Pollut Res Int, 2020 Nov;27(33):41623-41638.
    PMID: 32691313 DOI: 10.1007/s11356-020-10149-9
    Ethylenediaminetetraacetic acid (EDTA) can serve as a washing agent in the remediation of low-permeability layers contaminated by heavy metals (HMs). Therefore, batch adsorption experiments, where pure quartz (SM1) and mineral mixtures (SM2) were used as typical soil minerals (SMs) in low-permeability layers, were implemented to explore the effects of different EDTA concentrations, pH, and exogenous chemicals on the HM-SM-EDTA adsorption system. As the EDTA concentration increased, it gradually cut down the maximum Cd adsorption capacities of SM1 and SM2 from approximately 135 to 55 mg/kg and 2660 to 1453 mg/kg; and the maximum Pb adsorption capacities of SM1 and SM2 were reduced from 660 to 306 mg/kg and 19,677 to 19,262 mg/kg, respectively. When the initial mole ratio (MR = moles of HM ions/sum of moles of HM ions and EDTA) was closer to 0.5, the effect of EDTA was more effective. Additionally, EDTA worked well at pH below 7.0 and 4.0 for Cd and Pb, respectively. Low-molecular-weight organic acids (LMWOAs) affected the system mainly by bridging, complexation, adsorption site competition, and reductive dissolution. Cu2+, Fe2+ ions could significantly increase the Cd and Pb adsorption onto SM2. Notably, there were characteristic changes in mineral particles, including attachment of EDTA and microparticles, agglomeration, connection, and smoother surfaces, making the specific surface area (SSA) decrease from 16.73 to 12.59 m2/g. All findings indicated that EDTA could effectively and economically reduce the HM adsorption capacity of SMs at the reasonable MR value, contact time, and pH; EDTA reduced the HM adsorption capacity of SMs not only by complexation with HM ions but also by decreasing SSA and blocking active sites. Hence, the acquired insight from the presented study can help to promote the remediation of contaminated low-permeability layers in groundwater.
  5. Klionsky DJ, Abdelmohsen K, Abe A, Abedin MJ, Abeliovich H, Acevedo Arozena A, et al.
    Autophagy, 2016;12(1):1-222.
    PMID: 26799652 DOI: 10.1080/15548627.2015.1100356
  6. Dai C, Li S, Duan Y, Leong KH, Tu Y, Zhou L
    Sci Total Environ, 2021 Dec 20;801:149730.
    PMID: 34467938 DOI: 10.1016/j.scitotenv.2021.149730
    Pharmaceuticals in aquatic environment have raised wide attention in recent years due to their potential adverse effects and bioaccumulation in biota. China has been a major producer and consumer of pharmaceuticals, however, the potential human health risk of these chemicals is yet to be determined in China. In this study, we evaluated available exposure data for twenty pharmaceuticals in surface waters from Chinese five major river basins (the Yangtze, Haihe, Pearl, Songliao, and Yellow River Basins), and human health risk assessment was performed. Based on the concentration data and risk data, we conducted research on the source, cause, and control measures of the pharmaceuticals. The twenty pharmaceuticals were found to be ubiquitous in China with median concentrations between 0.09 and 304 ng/L. The estimated daily intake of pharmaceuticals from drinking water and eating fish was calculated. The intake via drinking water was significantly lower than that via eating fish. The risk quotients via water intake and fish consumption ranged from 0 to 17.2, with estrogen and sulfapyridine highest among the twenty pharmaceuticals. High risks of exposure were mainly in North China, including the Haihe and Songliao River Basins. This is the first analysis in Chinese major river basins that has filled the gaps in the research on the human health risks of pharmaceuticals. The results of the study provide basic information of pharmaceutical intake from drinking water and eating fish in China and provide insights into the risk management guidance of pharmaceuticals, and will facilitate the optimization of health advisories and policy making.
  7. Zhang JB, Dai C, Wang Z, You X, Duan Y, Lai X, et al.
    Water Res, 2023 Oct 01;244:120555.
    PMID: 37666149 DOI: 10.1016/j.watres.2023.120555
    Herein, biochar was prepared using rice straw, and it served as the peroxymonosulfate (PMS) activator to degrade naphthalene (NAP). The results showed that pyrolysis temperature has played an important role in regulating biochar structure and properties. The biochar prepared at 900°C (BC900) had the best activation capacity and could remove NAP in a wide range of initial pH (5-11). In the system of BC900/PMS, multi-reactive species were produced, in which 1O2 and electron transfer mainly contributed to NAP degradation. In addition, the interference of complex groundwater components on the NAP removal rate must get attention. Cl- had a significant promotional effect but risked the formation of chlorinated disinfection by-products. HCO3-, CO32-, and humic acid (HA) had an inhibitory effect; surfactants had compatibility problems with the BC900/PMS system, which could lead to unproductive consumption of PMS. Significantly, the BC900/PMS system showed satisfactory remediation performance in spiked natural groundwater and soil, and it could solve the problem of persistent groundwater contamination caused by NAP desorption from the soil. Besides, the degradation pathway of NAP was proposed, and the BC900/PMS system could degrade NAP into low or nontoxic products. These suggest that the BC900/PMS system has promising applications in in-situ groundwater remediation.
  8. Dai C, Han Y, Duan Y, Lai X, Fu R, Liu S, et al.
    Environ Res, 2022 Apr 01;205:112423.
    PMID: 34838568 DOI: 10.1016/j.envres.2021.112423
    The rapid economic and population growth in coastal areas is causing increasingly serious polycyclic aromatic hydrocarbons (PAHs) pollution in these regions. This review compared the PAHs pollution characteristics of different coastal areas, including industrial zones, commercial ports, touristic cities, aquacultural & agricultural areas, oil & gas exploitation areas and megacities. Currently there are various treatment methods to remediate soils and sediments contaminated with PAHs. However, it is necessary to provide a comprehensive overview of all the available remediation technologies up to date, so appropriate technologies can be selected to remediate PAHs pollution. In view of that, we analyzed the characteristics of the remediation mechanism, summarized the remediation methods for soil or sediments in coastal areas, which were physical repair, chemical oxidation, bioremediation and integrated approaches. Besides, this review also reported the development of new multi-functional green and sustainable systems, namely, micro-nano bubble (MNB), biochar, reversible surfactants and peracetic acid. While physical repair, expensive but efficient, was regarded as a suitable method for the PAHs remediation in coastal areas because of land shortage, integrated approaches would produce better results. The ultimate aim of the review was to ensure the successful restructuring of PAHs contaminated soil and sediments in coastal areas. Due to the environment heterogeneity, PAHs pollution in coastal areas remains as a daunting challenge. Therefore, new and suitable technologies are still needed to address the environmental issue.
  9. Dai C, Zhou H, You X, Duan Y, Tu Y, Liu S, et al.
    Environ Sci Pollut Res Int, 2020 May;27(13):15188-15197.
    PMID: 32072419 DOI: 10.1007/s11356-020-08064-0
    Transport of environmental pollutants in groundwater systems can be greatly influenced by colloids. In this study, the cotransport of Pb2+ and silica (SiO2) colloids at different Pb2+ concentrations was systematically investigated by batch adsorption and saturated sand column experiments. Results showed that SiO2 colloids had low adsorption capacity for Pb2+ (less than 1% of the input) compared with sands. In saturated porous media, SiO2 colloids showed a high mobility; however, with the increase of Pb2+ concentration in the sand column, the mobility of SiO2 colloids gradually decreased. Notably, SiO2 colloids could facilitate Pb2+ transport, although they did not serve as effective carriers of Pb2+. Under the condition of low Pb2+ concentration, SiO2 colloids promoted the Pb2+ transport mainly through the way of "transport channel," while changing the porosity of the medium and masking medium adsorption sites were the main mechanisms of SiO2 colloid-facilitated Pb2+ transport under the condition of high Pb2+ concentration. The discovery of this non-adsorption effect of colloids would improve our understanding of colloid-facilitated Pb2+ transport in saturated porous media, which provided new insights into the role of colloids, especially colloids with weak Pb2+ adsorption capacity, in Pb2+ occurrence and transport in soil-groundwater systems.
  10. Dai C, Shen H, Duan Y, You X, Lai X, Liu S, et al.
    PMID: 34505247 DOI: 10.1007/s11356-021-16266-3
    Nanomaterials are threatening the environment and human health, but there has been little discussion about the stability and mobility of nanoparticles (NPs) in saturated porous media at environmentally relevant concentrations of surfactants, which is a knowledge gap in exploring the fate of engineered NPs in groundwater. Therefore, the influences of the anionic surfactant (sodium dodecylbenzene sulfonate, SDBS), the cationic surfactant (cetyltrimethylammonium bromide, CTAB), and the nonionic surfactant (Tween-80) with environmentally relevant concentrations of 0, 5, 10, and 20 mg/L on nano-TiO2 (nTiO2, negatively charged) and nano-CeO2 (nCeO2, positively charged) transport through saturated porous media were examined by column experiments. On the whole, with increasing SDBS concentration from 0 to 20 mg/L, the concentration peak of nTiO2 and nCeO2 in effluents increased by approximately 0.2 and 0.3 (dimensionless concentration, C/C0), respectively, because of enhanced stability and reduced aggregate size resulting from enhanced electrostatic and steric repulsions. By contrast, the transportability of NPs significantly decreased with increasing CTAB concentration due to the attachment of positive charges, which was opposite to the charge on the medium surface and facilitated the NP deposition. On the other hand, the addition of Tween-80 had no significant influence on the stability and mobility of nTiO2 and nCeO2. The results were also demonstrated by the colloid filtration theory (CFT) modeling and the Derjaguin-Landau-Verwey-Overbeek (DLVO) interaction calculations; it might promote the assessment and remediation of NP pollution in subsurface environments.
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links