MyMedR

Displaying publications 1 - 20 of 44 in total

Abstract:

Sort:

Electrochemical Characteristics of a Polymer/Garnet Trilayer Composite Electrolyte for Solid-State Lithium-Metal Batteries

Walle KZ, Musuvadhi Babulal L, Wu SH, Chien WC, Jose R, Lue SJ, et al.

ACS Appl Mater Interfaces, 2021 Jan 20;13(2):2507-2520.
PMID: 33406841 DOI: 10.1021/acsami.0c17422

Although solid-state Li-metal batteries (LMBs) featuring polymer-based solid electrolytes might one day replace conventional Li-ion batteries, the poor Li-ion conductivity of solid polymer electrolytes at low temperatures has hindered their practical applications. Herein, we describe the first example of using a co-precipitation method in a Taylor flow reactor to produce the metal hydroxides of both the Ga/F dual-doped Li7La3Zr2O12 (Ga/F-LLZO) ceramic electrolyte precursors and the Li2MoO4-modified Ni0.8Co0.1Mn0.1O2 (LMO@T-LNCM 811) cathode materials for LMBs. The Li/Nafion (LiNf)-coated Ga/F-LLZO (LiNf@Ga/F-LLZO) ceramic filler was finely dispersed in the poly(vinylidene fluoride)/polyacrylonitrile/lithium bis(trifluoromethanesulfonimide)/succinonitrile matrix to give a trilayer composite polymer electrolyte (denoted "Tri-CPE") through a simple solution-casting. The bulk ionic conductivity of the Tri-CPE at room temperature was approximately 4.50 × 10-4 S cm-1 and exhibited a high Li+ ion transference number (0.84). It also exhibits a broader electrochemical window of 1-5.04 V versus Li/Li+. A full cell based on a CR2032 coin cell containing the LMO@T-LNCM811-based composite cathode, when cycled under 1 C/1 C at room temperature for 300 cycles, achieved an average Columbic efficiency of 99.4% and a capacity retention of 89.8%. This novel fabrication strategy for Tri-CPE structures has potential applications in the preparation of highly safe high-voltage cathodes for solid-state LMBs.
One-Dimensional Assembly of Conductive and Capacitive Metal Oxide Electrodes for High-Performance Asymmetric Supercapacitors

Harilal M, Vidyadharan B, Misnon II, Anilkumar GM, Lowe A, Ismail J, et al.

ACS Appl Mater Interfaces, 2017 Mar 29;9(12):10730-10742.
PMID: 28266837 DOI: 10.1021/acsami.7b00676

A one-dimensional morphology comprising nanograins of two metal oxides, one with higher electrical conductivity (CuO) and the other with higher charge storability (Co3O4), is developed by electrospinning technique. The CuO-Co3O4 nanocomposite nanowires thus formed show high specific capacitance, high rate capability, and high cycling stability compared to their single-component nanowire counterparts when used as a supercapacitor electrode. Practical symmetric (SSCs) and asymmetric (ASCs) supercapacitors are fabricated using commercial activated carbon, CuO, Co3O4, and CuO-Co3O4 composite nanowires, and their properties are compared. A high energy density of ∼44 Wh kg-1 at a power density of 14 kW kg-1 is achieved in CuO-Co3O4 ASCs employing aqueous alkaline electrolytes, enabling them to store high energy at a faster rate. The current methodology of hybrid nanowires of various functional materials could be applied to extend the performance limit of diverse electrical and electrochemical devices.
Vertical TiO2 Nanorods as a Medium for Stable and High-Efficiency Perovskite Solar Modules

Fakharuddin A, Di Giacomo F, Palma AL, Matteocci F, Ahmed I, Razza S, et al.

ACS Nano, 2015 Aug 25;9(8):8420-9.
PMID: 26208221 DOI: 10.1021/acsnano.5b03265

Perovskite solar cells employing CH3NH3PbI3-xClx active layers show power conversion efficiency (PCE) as high as 20% in single cells and 13% in large area modules. However, their operational stability has often been limited due to degradation of the CH3NH3PbI3-xClx active layer. Here, we report a perovskite solar module (PSM, best and av. PCE 10.5 and 8.1%), employing solution-grown TiO2 nanorods (NRs) as the electron transport layer, which showed an increase in performance (∼5%) even after shelf-life investigation for 2500 h. A crucial issue on the module fabrication was the patterning of the TiO2 NRs, which was solved by interfacial engineering during the growth process and using an optimized laser pulse for patterning. A shelf-life comparison with PSMs built on TiO2 nanoparticles (NPs, best and av. PCE 7.9 and 5.5%) of similar thickness and on a compact TiO2 layer (CL, best and av. PCE 5.8 and 4.9%) shows, in contrast to that observed for NR PSMs, that PCE in NPs and CL PSMs dropped by ∼50 and ∼90%, respectively. This is due to the fact that the CH3NH3PbI3-xClx active layer shows superior phase stability when incorporated in devices with TiO2 NR scaffolds.
Fulltext Water Purification through a Novel Electrospun Carbon Nanofiber Membrane

Jamil T, Munir S, Wali Q, Shah GJ, Khan ME, Jose R

ACS Omega, 2021 Dec 21;6(50):34744-34751.
PMID: 34963957 DOI: 10.1021/acsomega.1c05197

Here, we report water purification through novel polyvinyl alcohol (PVA)-based carbon nanofibers synthesized through the electrospinning technique. In our novel approach, we mix PVA and tetraethyl orthosilicate (TEOS) with green tea solutions with different concentrations to synthesize carbon-based nanofibers (CNFs) and further calcine at 280 °C for carbonization. The scanning electron microscopy (SEM) results show the diameter of the nanofibers to be ∼500 nm, which decreases by about 50% after carbonization, making them more suitable candidates for the filtration process. Next, using these carbon nanofibers, we prepare filters for water purification. The synthesized CNF filters show excellent performance and successful removal of contaminants from the water by analyzing the CNF-based filters before and after the filtration of water through SEM and energy-dispersive X-ray (EDX) spectroscopy. Our SEM and EDX results indicate the presence of various nanoparticles consisting of different elements such as Mg, Na, Ti, S, Si, and Fe on the filters, after the filtration of water. Additionally, the SEM results show that PVA and TEOS concentrations play an important role in the formation, uniformity, homogeneity, and particularly in the reduction of the nanofiber diameter.
Fulltext Exploration of Charge Storage Behavior of Binder-Free EDL Capacitors in Aqueous Electrolytes

Pal B, Sarkar KJ, Wu B, Děkanovský L, Mazánek V, Jose R, et al.

ACS Omega, 2023 Jan 17;8(2):2629-2638.
PMID: 36687114 DOI: 10.1021/acsomega.2c07143

Charge storage in electrochemical double-layer capacitors (EDLCs) is via the adsorption of electrolyte counterions in their positive and negative electrodes under an applied potential. This study investigates the EDLC-type charge storage in carbon nanotubes (CNT) electrodes in aqueous acidic (NaHSO4), basic (NaOH), and neutral (Na2SO4) electrolytes of similar cations but different anions as well as similar anions but different cations (Na2SO4 and Li2SO4) in a two-electrode Swagelok-type cell configuration. The physicochemical properties of ions, such as mobility/diffusion and solvation, are correlated with the charge storage parameters. The neutral electrolytes offer superior charge storage over the acidic and basic counterparts. Among the studied ions, SO4 2- and Li+ showed the most significant capacitance owing to their larger solvated ion size. The charge stored by the anions and cations follows the order SO4 2- > HSO4 - > OH- and Li+ > Na+, respectively. Consequently, the CNT//Li2SO4//CNT cell displayed outstanding charge storage indicators (operating voltage ∼0-2 V, specific capacitance ∼122 F·g-1, specific energy ∼67 W h·kg-1, and specific power ∼541 W·kg-1 at 0.5 A·g-1) than the other cells, which could light a red light-emitting diode (2.1 V) for several minutes. Besides, the CNT//Li2SO4//CNT device showed exceptional rate performance with a capacitance retention of ∼95% at various current densities (0.5-2.5 A·g-1) after 6500 cycles. The insights from this work could be used to design safer electrochemical capacitors of high energy density and power density.
New horizons in falls prevention and management for older adults: a global initiative

Montero-Odasso M, van der Velde N, Alexander NB, Becker C, Blain H, Camicioli R, et al.

Age Ageing, 2021 09 11;50(5):1499-1507.
PMID: 34038522 DOI: 10.1093/ageing/afab076

BACKGROUND: falls and fall-related injuries are common in older adults, have negative effects both on quality of life and functional independence and are associated with increased morbidity, mortality and health care costs. Current clinical approaches and advice from falls guidelines vary substantially between countries and settings, warranting a standardised approach. At the first World Congress on Falls and Postural Instability in Kuala Lumpur, Malaysia, in December 2019, a worldwide task force of experts in falls in older adults, committed to achieving a global consensus on updating clinical practice guidelines for falls prevention and management by incorporating current and emerging evidence in falls research. Moreover, the importance of taking a person-centred approach and including perspectives from patients, caregivers and other stakeholders was recognised as important components of this endeavour. Finally, the need to specifically include recent developments in e-health was acknowledged, as well as the importance of addressing differences between settings and including developing countries.
METHODS: a steering committee was assembled and 10 working Groups were created to provide preliminary evidence-based recommendations. A cross-cutting theme on patient's perspective was also created. In addition, a worldwide multidisciplinary group of experts and stakeholders, to review the proposed recommendations and to participate in a Delphi process to achieve consensus for the final recommendations, was brought together.
CONCLUSION: in this New Horizons article, the global challenges in falls prevention are depicted, the goals of the worldwide task force are summarised and the conceptual framework for development of a global falls prevention and management guideline is presented.
Fulltext World guidelines for falls prevention and management for older adults: a global initiative

Montero-Odasso M, van der Velde N, Martin FC, Petrovic M, Tan MP, Ryg J, et al.

Age Ageing, 2022 Sep 02;51(9).
PMID: 36178003 DOI: 10.1093/ageing/afac205

BACKGROUND: falls and fall-related injuries are common in older adults, have negative effects on functional independence and quality of life and are associated with increased morbidity, mortality and health related costs. Current guidelines are inconsistent, with no up-to-date, globally applicable ones present.
OBJECTIVES: to create a set of evidence- and expert consensus-based falls prevention and management recommendations applicable to older adults for use by healthcare and other professionals that consider: (i) a person-centred approach that includes the perspectives of older adults with lived experience, caregivers and other stakeholders; (ii) gaps in previous guidelines; (iii) recent developments in e-health and (iv) implementation across locations with limited access to resources such as low- and middle-income countries.
METHODS: a steering committee and a worldwide multidisciplinary group of experts and stakeholders, including older adults, were assembled. Geriatrics and gerontological societies were represented. Using a modified Delphi process, recommendations from 11 topic-specific working groups (WGs), 10 ad-hoc WGs and a WG dealing with the perspectives of older adults were reviewed and refined. The final recommendations were determined by voting.
RECOMMENDATIONS: all older adults should be advised on falls prevention and physical activity. Opportunistic case finding for falls risk is recommended for community-dwelling older adults. Those considered at high risk should be offered a comprehensive multifactorial falls risk assessment with a view to co-design and implement personalised multidomain interventions. Other recommendations cover details of assessment and intervention components and combinations, and recommendations for specific settings and populations.
CONCLUSIONS: the core set of recommendations provided will require flexible implementation strategies that consider both local context and resources.
Fulltext Striatin Gene Polymorphic Variants Are Associated With Salt Sensitive Blood Pressure in Normotensives and Hypertensives

Gupta T, Connors M, Tan JW, Manosroi W, Ahmed N, Ting PY, et al.

Am J Hypertens, 2017 Dec 08;31(1):124-131.
PMID: 28985281 DOI: 10.1093/ajh/hpx146

BACKGROUND: Understanding the interactions between genetics, sodium (Na+) intake, and blood pressure (BP) will help overcome the lack of individual specificity in our current treatment of hypertension. This study had 3 goals: expand on the relationship between striatin gene (STRN) status and salt-sensitivity of BP (SSBP); evaluate the status of Na+ and volume regulating systems by striatin risk allele status; evaluate potential SSBP mechanisms.
METHODS: We assessed the relationship between STRN status in humans (HyperPATH cohort) and SSBP and on volume regulated systems in humans and a striatin knockout mouse (STRN+/-).
RESULTS: The previously identified association between a striatin risk allele and systolic SSBP was demonstrated in a new cohort (P = 0.01). The STRN-SSBP association was significant for the combined cohort (P = 0.003; β = +5.35 mm Hg systolic BP/risk allele) and in the following subgroups: normotensives, hypertensives, men, and older subjects. Additionally, we observed a lower epinephrine level in risk allele carriers (P = 0.014) and decreased adrenal medulla phenylethanolamine N-methyltransferase (PNMT) in STRN+/- mice. No significant associations were observed with other volume regulated systems.
CONCLUSIONS: These results support the association between a variant of striatin and SSBP and extend the findings to normotensive individuals and other subsets. In contrast to most salt-sensitive hypertensives, striatin-associated SSBP is associated with normal plasma renin activity and reduced epinephrine levels. These data provide clues to the underlying cause and a potential pathway to achieve, specific, personalized treatment, and prevention.
Fulltext Guidelines for the use and interpretation of assays for monitoring autophagy (4th edition)1

Klionsky DJ, Abdel-Aziz AK, Abdelfatah S, Abdellatif M, Abdoli A, Abel S, et al.

Autophagy, 2021 Jan;17(1):1-382.
PMID: 33634751 DOI: 10.1080/15548627.2020.1797280

In 2008, we published the first set of guidelines for standardizing research in autophagy. Since then, this topic has received increasing attention, and many scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Thus, it is important to formulate on a regular basis updated guidelines for monitoring autophagy in different organisms. Despite numerous reviews, there continues to be confusion regarding acceptable methods to evaluate autophagy, especially in multicellular eukaryotes. Here, we present a set of guidelines for investigators to select and interpret methods to examine autophagy and related processes, and for reviewers to provide realistic and reasonable critiques of reports that are focused on these processes. These guidelines are not meant to be a dogmatic set of rules, because the appropriateness of any assay largely depends on the question being asked and the system being used. Moreover, no individual assay is perfect for every situation, calling for the use of multiple techniques to properly monitor autophagy in each experimental setting. Finally, several core components of the autophagy machinery have been implicated in distinct autophagic processes (canonical and noncanonical autophagy), implying that genetic approaches to block autophagy should rely on targeting two or more autophagy-related genes that ideally participate in distinct steps of the pathway. Along similar lines, because multiple proteins involved in autophagy also regulate other cellular pathways including apoptosis, not all of them can be used as a specific marker for bona fide autophagic responses. Here, we critically discuss current methods of assessing autophagy and the information they can, or cannot, provide. Our ultimate goal is to encourage intellectual and technical innovation in the field.
Effect of biofilm formation on the performance of microbial fuel cell for the treatment of palm oil mill effluent

Baranitharan E, Khan MR, Prasad DM, Teo WF, Tan GY, Jose R

Bioprocess Biosyst Eng, 2015 Jan;38(1):15-24.
PMID: 24981021 DOI: 10.1007/s00449-014-1239-9

Anode biofilm is a crucial component in microbial fuel cells (MFCs) for electrogenesis. Better knowledge about the biofilm development process on electrode surface is believed to improve MFC performance. In this study, double-chamber microbial fuel cell was operated with diluted POME (initial COD = 1,000 mg L(-1)) and polyacrylonitrile carbon felt was used as electrode. The maximum power density, COD removal efficiency and Coulombic efficiency were found as 22 mW m(-2), 70 and 24 %, respectively. FTIR and TGA analysis confirmed the formation of biofilm on the electrode surface during MFC operation. The impact of anode biofilm on anodic polarization resistance was investigated using electrochemical impedance spectroscopy (EIS) and microbial community changes during MFC operation using denaturing gradient gel electrophoresis (DGGE). The EIS-simulated results showed the reduction of charge transfer resistance (R ct) by 16.9 % after 14 days of operation of the cell, which confirms that the development of the microbial biofilm on the anode decreases the R ct and therefore improves power generation. DGGE analysis showed the variation in the biofilm composition during the biofilm growth until it forms an initial stable microbial community, thereafter the change in the diversity would be less. The power density showed was directly dependent on the biofilm development and increased significantly during the initial biofilm development period. Furthermore, DGGE patterns obtained from 7th and 14th day suggest the presence of less diversity and probable functional redundancy within the anodic communities possibly responsible for the stable MFC performance in changing environmental conditions.
Prevalence and implications of microplastics in potable water system: An update

Menon V, Sharma S, Gupta S, Ghosal A, Nadda AK, Jose R, et al.

Chemosphere, 2023 Mar;317:137848.
PMID: 36642147 DOI: 10.1016/j.chemosphere.2023.137848

Synthetic plastics, which are lightweight, durable, elastic, mouldable, cheap, and hydrophobic, were originally invented for human convenience. However, their non-biodegradability and continuous accumulation at an alarming rate as well as subsequent conversion into micro/nano plastic scale structures via mechanical and physio-chemical degradation pose significant threats to living beings, organisms, and the environment. Various minuscule forms of plastics detected in water, soil, and air are making their passage into living cells. High temperature and ambient humidity increase the degradation potential of plastic polymers photo-catalytically under sunlight or UV-B radiations. Microplastics (MPs) of polyethylene terephthalate, polyethylene, polystyrene, polypropylene, and polyvinyl chloride have been detected in bottled water. These microplastics are entering into the food chain cycle, causing serious harm to all living organisms. MPs entering into the food chain are usually inert in nature, possessing different sizes and shapes. Once they enter a cell or tissue, it causes mechanical damage, induces inflammation, disturbs metabolism, and even lead to necrosis. Various generation routes, types, impacts, identification, and treatment of microplastics entering the water bodies and getting associated with various pollutants are discussed in this review. It emphasizes potential detection techniques like pyrolysis, gas chromatography-mass spectrometry (GC-MS), micro-Raman spectroscopy, and fourier transform infrared spectroscopy (FT IR) spectroscopy for microplastics from water samples.
Fulltext Sustainability in Numbers by Data Analytics

Ramakrishna S, Hu W, Jose R

Circ Econ Sustain, 2022 Aug 06.
PMID: 35966038 DOI: 10.1007/s43615-022-00201-w

For a successful delivery of the United Nations Sustainable Development Goals (UNSDGs) and to track the progress of UNSDGs as well as identify the gaps and the areas requiring more attention, periodic analyses on the "research on sustainability" by various countries and their contribution to the topic are inevitable. This paper tracks the trends in sustainability research including the geographical distribution on sustainability research, their level of multi-disciplinarity and the cross-border collaboration, their distribution of funding with respect to the UNSDGs, and the lifecycle analyses. Cumulative publications and patents on sustainability could be fitted to an exponential function, thereby highlighting the importance of the research on sustainability in the recent past. Besides, this analytics quantifies cross-border collaborations and knowledge integration to solve critical issues as well as traditional and emerging sources to undertake sustainability research. As an important aspect of resource sustainability and circular economy, trends in publication and funding on lifecycle assessment have also been investigated. The analytics present here identify that major sustainability research volume is from the social sciences as well as business and economics sectors, whereas contributions from the engineering disciplines to develop technologies for sustainability practices are relatively lower. Similarly, funding distribution is also not evenly distributed under various SDGs; the larger share of funding has been on energy security and climate change research. Thus, this study identifies many gaps to be filled for the UNSDGs to be successful.
Data of chemical analysis and electrical properties of SnO2-TiO2 composite nanofibers

Bakr ZH, Wali Q, Ismail J, Elumalai NK, Uddin A, Jose R

Data Brief, 2018 Jun;18:860-863.
PMID: 29900250 DOI: 10.1016/j.dib.2018.03.110

In this data article, we provide energy dispersive X-ray spectroscopy (EDX) spectra of the electrospun composite (SnO2-TiO2) nanowires with the elemental values measured in atomic and weight%. The linear sweep voltammetry data of composite and its component nanofibers are provided. The data collected in this article is directly related to our research article "Synergistic combination of electronic and electrical properties of SnO2 and TiO2 in a single SnO2-TiO2 composite nanowire for dye-sensitized solar cells" [1].
Fulltext Advanced DNA-Based Point-of-Care Diagnostic Methods for Plant Diseases Detection

Lau HY, Botella JR

Front Plant Sci, 2017;8:2016.
PMID: 29375588 DOI: 10.3389/fpls.2017.02016

Diagnostic technologies for the detection of plant pathogens with point-of-care capability and high multiplexing ability are an essential tool in the fight to reduce the large agricultural production losses caused by plant diseases. The main desirable characteristics for such diagnostic assays are high specificity, sensitivity, reproducibility, quickness, cost efficiency and high-throughput multiplex detection capability. This article describes and discusses various DNA-based point-of care diagnostic methods for applications in plant disease detection. Polymerase chain reaction (PCR) is the most common DNA amplification technology used for detecting various plant and animal pathogens. However, subsequent to PCR based assays, several types of nucleic acid amplification technologies have been developed to achieve higher sensitivity, rapid detection as well as suitable for field applications such as loop-mediated isothermal amplification, helicase-dependent amplification, rolling circle amplification, recombinase polymerase amplification, and molecular inversion probe. The principle behind these technologies has been thoroughly discussed in several review papers; herein we emphasize the application of these technologies to detect plant pathogens by outlining the advantages and disadvantages of each technology in detail.
Fulltext An automated materials and processes identification tool for material informatics using deep learning approach

Miah MSU, Sulaiman J, Sarwar TB, Ibrahim N, Masuduzzaman M, Jose R

Heliyon, 2023 Sep;9(9):e20003.
PMID: 37809409 DOI: 10.1016/j.heliyon.2023.e20003

This article reports a tool that enables Materials Informatics, termed as MatRec, via a deep learning approach. The tool captures data, makes appropriate domain suggestions, extracts various entities such as materials and processes, and helps to establish entity-value relationships. This tool uses keyword extraction, a document similarity index to suggest relevant documents, and a deep learning approach employing Bi-LSTM for entity extraction. For example, materials and processes for electrical charge storage under an electric double layer capacitor (EDLC) mechanism are demonstrated herewith. A knowledge graph approach finds and visualizes different latent knowledge sets from the processed information. The MatRec received an F1 score of 9̃6% for entity extraction, 8̃3% for material-value relationship extraction, and 8̃7% for process-value relationship extraction, respectively. The proposed MatRec could be extended to solve material selection issues for various applications and could be an excellent tool for academia and industry.
Enhanced direct electron transfer of redox protein based on multiporous SnO2 nanofiber-carbon nanotube nanocomposite and its application in biosensing

Alim S, Kafi AKM, Jose R, Yusoff MM, Vejayan J

Int J Biol Macromol, 2018 Jul 15;114:1071-1076.
PMID: 29625222 DOI: 10.1016/j.ijbiomac.2018.03.184

A novel third generation H2O2 biosensor is fabricated using multiporous SnO2 nanofiber/carbon nanotubes (CNTs) composite as a matrix for the immobilization of redox protein onto glassy carbon electrode. The multiporous nanofiber (MPNFs) of SnO2 is synthesized by electrospinning technique from the tin precursor. This nanofiber shows high surface area and good electrical conductivity. The SnO2 nanofiber/CNT composite increases the efficiency of biomolecule loading due to its high surface area. The morphology of the nanofiber has been evaluated by scanning electron microscopy (SEM). Cyclic Voltammetry and amperometry technique are employed to study and optimize the performance of the fabricated electrode. A direct electron transfer between the protein's redox centre and the glassy carbon electrode is established after fabrication of the electrode. The fabricated electrode shows excellent electrocatalytic reduction to H2O2. The catalysis currents increases linearly to the H2O2 concentration in a wide range of 1.0 10-6-1.4×10-4M and the lowest detection limit was 30nM (S/N=3). Moreover, the biosensor showed a rapid response to H2O2, a good stability and reproducibility.
Curcumin loaded waste biomass resourced cellulosic nanofiber cloth as a potential scaffold for regenerative medicine: An in-vitro assessment

Suteris NN, Yasin A, Misnon II, Roslan R, Zulkifli FH, Rahim MHA, et al.

Int J Biol Macromol, 2021 Dec 29;198:147-156.
PMID: 34971642 DOI: 10.1016/j.ijbiomac.2021.12.006

This article demonstrates the development of nanofibrous cloths by electrospinning of renewable materials, i.e., curcumin-loaded 90% cellulose acetate (CA)/10% poly(ε-caprolactone) (PCL), for applications in regenerative medicine. The CA is derived from the biomass waste of the oil palm plantation (empty fruit bunch). The nanofiber scaffolds are characterized for the fiber morphology, microstructure, thermal properties, and wettability. The optimized smooth and bead-free electrospun fiber cloth contains 90% CA and 10% PCL in two curcumin compositions (0.5 and 1 wt%). The role of curcumin is shown to be two-fold: the first is its function as a drug and the second is its role in lowering the water contact angle and increasing the hydrophilicity. The hydrophilicity enhancements are related to the hydrogen bonding between the components. The enhanced hydrophilicity contributed to improve the swelling behavior of the scaffolds; the CA/PCL/Cur (0.5%) and the CA/PCL/Cur (1.0%) showed swelling of ~700 and 950%, respectively, in phosphate-buffered saline (PBS). The drug-release studies revealed the highest cumulative drug release of 60% and 78% for CA/PCL/Cur (0.5%) and CA/PCL/Cur (1.0%) nanofibers, respectively. The in-vitro studies showed that CA/PCL/Cur (0.5 wt%) and CA/PCL/Cur (1.0 wt%) nanofiber scaffolds facilitate a higher proliferation and expression of actin in fibroblasts than those scaffolds without curcumin for wound healing applications.
Fulltext Predicted basal metabolic rate and cancer risk in the European Prospective Investigation into Cancer and Nutrition

Kliemann N, Murphy N, Viallon V, Freisling H, Tsilidis KK, Rinaldi S, et al.

Int J Cancer, 2020 Aug 01;147(3):648-661.
PMID: 31652358 DOI: 10.1002/ijc.32753

Emerging evidence suggests that a metabolic profile associated with obesity may be a more relevant risk factor for some cancers than adiposity per se. Basal metabolic rate (BMR) is an indicator of overall body metabolism and may be a proxy for the impact of a specific metabolic profile on cancer risk. Therefore, we investigated the association of predicted BMR with incidence of 13 obesity-related cancers in the European Prospective Investigation into Cancer and Nutrition (EPIC). BMR at baseline was calculated using the WHO/FAO/UNU equations and the relationships between BMR and cancer risk were investigated using multivariable Cox proportional hazards regression models. A total of 141,295 men and 317,613 women, with a mean follow-up of 14 years were included in the analysis. Overall, higher BMR was associated with a greater risk for most cancers that have been linked with obesity. However, among normal weight participants, higher BMR was associated with elevated risks of esophageal adenocarcinoma (hazard ratio per 1-standard deviation change in BMR [HR1-SD ]: 2.46; 95% CI 1.20; 5.03) and distal colon cancer (HR1-SD : 1.33; 95% CI 1.001; 1.77) among men and with proximal colon (HR1-SD : 1.16; 95% CI 1.01; 1.35), pancreatic (HR1-SD : 1.37; 95% CI 1.13; 1.66), thyroid (HR1-SD : 1.65; 95% CI 1.33; 2.05), postmenopausal breast (HR1-SD : 1.17; 95% CI 1.11; 1.22) and endometrial (HR1-SD : 1.20; 95% CI 1.03; 1.40) cancers in women. These results indicate that higher BMR may be an indicator of a metabolic phenotype associated with risk of certain cancer types, and may be a useful predictor of cancer risk independent of body fatness.
Fulltext Dysregulated aldosterone secretion in persons of African descent with endothelin-1 gene variants

Tan JW, Gupta T, Manosroi W, Yao TM, Hopkins PN, Williams JS, et al.

JCI Insight, 2017 12 07;2(23).
PMID: 29212952 DOI: 10.1172/jci.insight.95992

Compared with persons of European descent (ED), persons of African descent (AD) have lower aldosterone (ALDO) levels, with the assumption being that the increased cardiovascular disease (CVD) risk associated with AD is not related to ALDO. However, the appropriateness of the ALDO levels for the volume status in AD is unclear. We hypothesized that, even though ALDO levels are lower in AD, they are inappropriately increased, and therefore, ALDO could mediate the increased CVD in AD. To test this hypothesis, we analyzed data from HyperPATH - 1,788 individuals from the total cohort and 765 restricted to ED-to-AD in a 2:1 match and genotyped for the endothelin-1 gene (EDN1). Linear regression analyses with adjustments were performed. In the total and restricted cohorts, PRA, ALDO, and urinary potassium levels were significantly lower in AD. However, in the AD group, greater ALDO dysregulation was present as evidenced by higher ALDO/plasma renin activity (PRA) ratios (ARR) and sodium-modulated ALDO suppression-to-stimulation indices. Furthermore, EDN1 minor allele carriers had significantly greater ARRs than noncarriers but only in the AD group. ARR levels were modulated by a significant interaction between EDN1 and AD. Thus, EDN1 variants may identify particularly susceptible ADs who will be responsive to treatment targeting ALDO-dependent pathways (e.g., mineralocorticoid-receptor antagonists).
Facile fabrication of thin metal oxide films on porous carbon for high density charge storage

Vijayan BL, Misnon II, Anil Kumar GM, Miyajima K, Reddy MV, Zaghib K, et al.

J Colloid Interface Sci, 2020 Mar 07;562:567-577.
PMID: 31780115 DOI: 10.1016/j.jcis.2019.11.077

In an effort to minimize the usage of non-renewable materials and to enhance the functionality of the renewable materials, we have developed thin metal oxide coated porous carbon derived from a highly abundant non-edible bio resource, i.e., palm kernel shell, using a one-step activation-coating procedure and demonstrated their superiority as a supercapacitive energy storage electrode. In a typical experiment, an optimized composition contained ~10 wt% of Mn2O3 on activated carbon (AC); a supercapacitor electrode fabricated using this electrode showed higher rate capability and more than twice specific capacitance than pure carbon electrode and could be cycled over 5000 cycles without any appreciable capacity loss in 1 M Na2SO4 electrolyte. A symmetric supercapacitor prototype developed using the optimum electrode showed nearly four times higher energy density than the pure carbon owing to the enhancements in voltage window and capacitance. A lithium ion capacitor fabricated in half-cell configuration using 1 M LiPF6 electrolyte showed larger voltage window, superior capacitance and rate capability in the ~10 wt% Mn2O3 @AC than the pure analogue. These results demonstrate that the current protocol allows fabrication of superior charge storing electrodes using renewable materials functionalized by minimum quantity of earthborn materials.

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links