Displaying publications 1 - 20 of 101 in total

Abstract:
Sort:
  1. Ahmad Saffian H, Talib MA, Lee SH, Md Tahir P, Lee CH, Ariffin H, et al.
    Polymers (Basel), 2020 Aug 15;12(8).
    PMID: 32824275 DOI: 10.3390/polym12081833
    Mechanical strength, thermal conductivity and electrical breakdown of polypropylene/lignin/kenaf core fiber (PP/L/KCF) composite were studied. PP/L, PP/KCF and PP/L/KCF composites with different fiber and lignin loading was prepared using a compounding process. Pure PP was served as control. The results revealed that tensile and flexural properties of the PP/L/KCF was retained after addition of lignin and kenaf core fibers. Thermal stability of the PP composites improved compared to pure PP polymer. As for thermal conductivity, no significant difference was observed between PP composites and pure PP. However, PP/L/KCF composite has higher thermal diffusivity. All the PP composites produced are good insulating materials that are suitable for building. All PP composites passed withstand voltage test in air and oil state as stipulated in IEC 60641-3 except PP/L in oil state. SEM micrograph showed that better interaction and adhesion between polymer matrix, lignin and kenaf core fibers was observed and reflected on the better tensile strength recorded in PP/L/KCF composite. This study has successfully filled the gap of knowledge on using lignin and kenaf fibers as PP insulator composite materials. Therefore, it can be concluded that PP/Lignin/KCF has high potential as an insulating material.
  2. Ahmad Saffian H, Hyun-Joong K, Md Tahir P, Ibrahim NA, Lee SH, Lee CH
    Materials (Basel), 2019 Dec 05;12(24).
    PMID: 31817323 DOI: 10.3390/ma12244043
    In this study, the effects of lignin modification on the properties of kenaf core fiber reinforced poly(butylene succinate) biocomposites were examined. A weight percent gain (WPG) value of 30.21% was recorded after the lignin were modified with maleic anhydride. Lower mechanical properties were observed for lignin composites because of incompatible bonding between the hydrophobic matrix and the hydrophilic lignin. Modified lignin (ML) was found to have a better interfacial bonding, since maleic anhydrides remove most of the hydrophilic hydrogen bonding (this was proven by a Fourier-transform infrared (FTIR) spectrometer-a reduction of broadband near 3400 cm-1, corresponding to the -OH stretching vibration of hydroxyl groups for the ML samples). On the other hand, ML was found to have a slightly lower glass transition temperature, Tg, since reactions with maleic anhydride destroy most of the intra- and inter-molecular hydrogen bonds, resulting in a softer structure at elevated temperatures. The addition of kraft lignin was found to increase the thermal stability of the PBS polymer composites, while modified kraft lignin showed higher thermal stability than pure kraft lignin and possessed delayed onset thermal degradation temperature.
  3. Aisyah HA, Paridah MT, Sapuan SM, Ilyas RA, Khalina A, Nurazzi NM, et al.
    Polymers (Basel), 2021 Feb 02;13(3).
    PMID: 33540731 DOI: 10.3390/polym13030471
    Over the last decade, the progressive application of natural fibres in polymer composites has had a major effect in alleviating environmental impacts. Recently, there is a growing interest in the development of green materials in a woven form by utilising natural fibres from lignocellulosic materials for many applications such as structural, non-structural composites, household utilities, automobile parts, aerospace components, flooring, and ballistic materials. Woven materials are one of the most promising materials for substituting or hybridising with synthetic polymeric materials in the production of natural fibre polymer composites (NFPCs). These woven materials are flexible, able to be tailored to the specific needs and have better mechanical properties due to their weaving structures. Seeing that the potential advantages of woven materials in the fabrication of NFPC, this paper presents a detailed review of studies related to woven materials. A variety of factors that influence the properties of the resultant woven NFRC such as yarn characteristics, fabric properties as well as manufacturing parameters were discussed. Past and current research efforts on the development of woven NFPCs from various polymer matrices including polypropylene, polylactic acid, epoxy and polyester and the properties of the resultant composites were also compiled. Last but not least, the applications, challenges, and prospects in the field also were highlighted.
  4. Aisyah HA, Paridah MT, Khalina A, Sapuan SM, Wahab MS, Berkalp OB, et al.
    Polymers (Basel), 2018 Nov 28;10(12).
    PMID: 30961245 DOI: 10.3390/polym10121320
    The effects of different fabric materials namely weave designs (plain and satin) and fabric counts (5 × 5 and 6 × 6) on the properties of laminated woven kenaf/carbon fibre reinforced epoxy hybrid composites were evaluated. The hybrid composites were fabricated from two types of fabric, i.e., woven kenaf that was made from a yarn of 500tex and carbon fibre, by using vacuum infusion technique and epoxy resin as matrix. The panels were tested for tensile, flexural, and impact strengths. The results have revealed that plain fabric is more suitable than satin fabric for obtaining high tensile and impact strengths. Using a fabric count of 5 × 5 has generated composites that are significantly higher in flexural modulus as compared to 6 × 6 which may be attributed to their structure and design. The scanned electron micrographs of the fractured surfaces of the composites demonstrated that plain woven fabric composites had better adhesion properties than satin woven fabric composites, as indicated by the presence of notably lower amount of fibre pull out.
  5. Al-Sanea MM, Ali Khan MS, Abdelazem AZ, Lee SH, Mok PL, Gamal M, et al.
    Molecules, 2018 Jan 31;23(2).
    PMID: 29385071 DOI: 10.3390/molecules23020297
    A new series of 1-phenyl-3-(4-(pyridin-3-yl)phenyl)urea derivatives were synthesized and subjected to in vitro antiproliferative screening against National Cancer Institute (NCI)-60 human cancer cell lines of nine different cancer types. Fourteen compounds 5a-n were synthesized with three different solvent exposure moieties (4-hydroxylmethylpiperidinyl and trimethoxyphenyloxy and 4-hydroxyethylpiperazine) attached to the core structure. Substituents with different π and σ values were added on the terminal phenyl group. Compounds 5a-e with a 4-hydroxymethylpiperidine moiety showed broad-spectrum antiproliferative activity with higher mean percentage inhibition values over the 60-cell line panel at 10 µM concentration. Compound 5a elicited lethal rather than inhibition effects on SK-MEL-5 melanoma cell line, 786-0, A498, RXF 393 renal cancer cell lines, and MDA-MB-468 breast cancer cell line. Two compounds, 5a and 5d showed promising mean growth inhibitions and thus were further tested at five-dose mode to determine median inhibitory concentration (IC50) values. The data revealed that urea compounds 5a and 5d are the most active derivatives, with significant efficacies and superior potencies than paclitaxel in 21 different cancer cell lines belonging particularly to renal cancer and melanoma cell lines. Moreover, 5a and 5d had superior potencies than gefitinib in 38 and 34 cancer cell lines, respectively, particularly colon cancer, breast cancer and melanoma cell lines.
  6. Ang ZY, Cheah KY, Abdullah NB, Samsuri SB, Lee SH, Yem AW, et al.
    J Oncol Pharm Pract, 2020 Sep;26(6):1306-1317.
    PMID: 31810422 DOI: 10.1177/1078155219891209
    PURPOSE: To identify the cost and reasons of returned parenteral chemotherapy regimens at a tertiary hospital in Kuala Lumpur, Malaysia.

    METHODS: Data were retrospectively extracted from all the Chemotherapy Return Forms in 2016, which is a compulsory documentation accompanying each return of parenteral chemotherapy regimen. The following data were extracted: patient's diagnosis, gender, location of treatment (i.e. ward/daycare clinic), start date of chemotherapy regimen, type of cytotoxic drug returned, dose of cytotoxic drug returned, number of cytotoxic drug preparations returned and reason for return as well as whether the returned cytotoxic drug preparations could be re-dispensed. The cost of wastage was calculated based on the cost per mg (or per unit) of the particular returned cytotoxic drug.

    RESULTS: One hundred and fifty-nine cases of returned chemotherapy regimen comprising of 231 parenteral cytotoxic drug preparations were analysed. The total cost of returned chemotherapy regimen for 2016 was €3632, with €756 (20.8%) worth of chemotherapy regimens returned due to preventable reasons and €2876 (79.2%) worth of chemotherapy regimens returned due to non-preventable reasons. Approximately 50% of cases returned chemotherapy regimen were due to deterioration of patient's clinical condition and another 24.5% of cases of returned chemotherapy regimen were attributed to adverse drug reactions.

    CONCLUSION: Wastage associated to non-preventable reasons such as adverse drug reactions and preventable causes like refusal of patients can be further reduced by using newer healthcare innovations and establishment of written institutional protocols or standard operating procedures as references for in-charge healthcare personnel when cytotoxic drug-related issues occur. Adoption of cost-saving strategies that have been proven by studies could further improve current cost containment strategies.

  7. Arikrishnan S, Loh JS, Teo XW, Bin Norizan F, Low ML, Lee SH, et al.
    PMID: 34238173 DOI: 10.2174/1871520621666210708100019
    BACKGROUND: The lack of specificity, severe side effects, and development of drug resistance have largely limited the use of platinum-based compounds in cancer treatment. Therefore, copper complexes have emerged as potential alternatives to platinum-based compounds.

    OBJECTIVE: Ternary copper (II) complex incorporated with 1-10-phenanthroline and L-tyrosine was investigated for its anti-cancer effects in HT-29 colorectal cancer cells.

    METHODS: Cytotoxic effects of ternary copper (II) complex in HT-29 cells were evaluated using MTT assay, Real-Time Cell Analysis (RTCA), and lactate dehydrogenase (LDH) assay. Cell cycle analysis was performed using flow cytometry. Apoptosis induction was studied by Annexin V-FITC/propidium iodide (PI) staining and mitochondrial membrane potential analysis (JC-10 staining) using flow cytometry. Intracellular reactive oxygen species (ROS) were detected by DCFH-DA assay. The expression of proteins involved in the apoptotic signalling pathway (p53, caspases, and PARP-1) was evaluated by western blot analysis.

    RESULTS: Ternary copper (II) complex reduced the cell viability of HT-29 cells in a time- and dose-dependent manner, with IC50 of 2.4 ± 0.4 and 0.8 ± 0.04 µM at 24 and 48 hours, respectively. Cell cycle analysis demonstrated induction of S-phase cell cycle arrest. Morphological evaluation and Annexin V-FITC/PI flow cytometry analysis confirmed induction of apoptosis that was further supported by cleavage and activation of caspase-8, caspase-9, caspase-3, and PARP-1. Mutant p53 was also downregulated in a dose-dependent manner. No LDH release, mitochondrial membrane potential disruption, and ROS production were observed.

    CONCLUSION: Ternary copper (II) complex holds great potential to be developed for colorectal cancer treatment.

  8. Bose RJC, Tharmalingam N, Choi Y, Madheswaran T, Paulmurugan R, McCarthy JR, et al.
    Int J Nanomedicine, 2020;15:8437-8449.
    PMID: 33162754 DOI: 10.2147/IJN.S271850
    BACKGROUND: Lipid polymer hybrid nanoparticles (LPHNPs) have been widely investigated in drug and gene delivery as well as in medical imaging. A knowledge of lipid-based surface engineering and its effects on how the physicochemical properties of LPHNPs affect the cell-nanoparticle interactions, and consequently how it influences the cytological response, is in high demand.

    METHODS: Herein, we have engineered antibiotic-loaded (doxycycline or vancomycin) LPHNPs with cationic and zwitterionic lipids and examined the effects on their physicochemical characteristics (size and charge), antibiotic entrapment efficiency, and the in vitro intracellular bacterial killing efficiency against Mycobacterium smegmatis or Staphylococcus aureus infected macrophages.

    RESULTS: The incorporation of cationic or zwitterionic lipids in the LPHNP formulation resulted in a size reduction in LPHNPs formulations and shifted the surface charge of bare NPs towards positive or neutral values. Also observed were influences on the drug incorporation efficiency and modulation of the drug release from the biodegradable polymeric core. The therapeutic efficacy of LPHNPs loaded with vancomycin was improved as its minimum inhibitory concentration (MIC) (2 µg/mL) versus free vancomycin (4 µg/mL). Importantly, our results show a direct relationship between the cationic surface nature of LPHNPs and its intracellular bacterial killing efficiency as the cationic doxycycline or vancomycin loaded LPHNPs reduced 4 or 3 log CFU respectively versus the untreated controls.

    CONCLUSION: In our study, modulation of surface charge in the nanomaterial formulation increased macrophage uptake and intracellular bacterial killing efficiency of LPHNPs loaded with antibiotics, suggesting alternate way for optimizing their use in biomedical applications.

  9. Brianna, Lee SH
    Med Oncol, 2023 Feb 03;40(3):88.
    PMID: 36735206 DOI: 10.1007/s12032-023-01954-6
    Chemotherapy is one of the widely used anticancer treatments that involves the use of powerful cytotoxic drugs to stop tumor growth by targeting rapidly dividing cells through various mechanisms, which will be elucidated in this review. Introduced during the early twentieth century, chemotherapy has since lengthened the longevity of innumerable cancer patients. However, the increase in lifespan is at the expense of quality of life as patients are at risk of developing short-term and long-term side effects following chemotherapy, such as alopecia (hair loss), chemotherapy-induced peripheral neuropathy, chemotherapy-induced nausea and vomiting, cardiotoxicity, diarrhea, infertility, and chemo brain. Currently, a number of these chemotherapy-induced adverse effects are managed through supportive care and approved treatments, while the rest of the side effects are unavoidable. Hence, chemotherapeutic drugs associated with inevitable side effects are only administered when their therapeutic role outweighs their chemotoxicity, thus severely limiting the potency of chemotherapy in treating malignancy. Therein, the potential approaches to alleviating side effects of chemotherapy ranging from pharmaceutical drugs to alternative therapies will be discussed in this review in hopes of increasing the tolerance and effectiveness of future chemotherapeutic treatments.
  10. Chan CK, Lee HY, Choi WC, Cho JY, Lee SH
    Eur Spine J, 2011 Jul;20 Suppl 2:S217-21.
    PMID: 20938789 DOI: 10.1007/s00586-010-1585-5
    Sciatica-like leg pain can be the main presenting symptom in patients with cervical cord compression. It is a false localizing presentation, which may lead to missed or delayed diagnosis, resulting in the wrong plan of management, especially in the presence of concurrent lumbar lesions. Medical history, physical findings and the results of imaging studies were reviewed in two cases of cervical cord compressions, which presented with sciatica-like leg pain. There was multi-level cervical spondylosis with cord compression in the first patient and the second patient had two levels of cervical disc herniation with cord compression. In both cases, there were co-existing lumbar lesions, which could be responsible for the presentation of the leg pain. Cervical blocks were diagnostic in identifying the level responsible for the leg pain and it was confirmed so after cervical decompressive surgery in both cases, which brought significant pain relief. Funicular leg pain is a rare presentation of cervical cord compression. It is a referred pain due to the irritation of the ascending spinothalamic tract. Cervical blocks were successful in identifying the cause of funicular pain in our cases and this may pave the way for further studies to establish the role of cervical blocks as a diagnostic tool for funicular pain caused by cord compression.
  11. Chang CT, Teoh SL, Cheah WK, Lee PJ, Azman MA, Ling SH, et al.
    J Pharm Policy Pract, 2023 Oct 03;16(1):113.
    PMID: 37789376 DOI: 10.1186/s40545-023-00621-5
    BACKGROUND: Polypharmacy and the use of potentially inappropriate medications (PIMs) are prevalent among older patients admitted to hospitals, posing a heightened risk of adverse drug events. This trial aims to evaluate the effectiveness of a pharmacist-led deprescribing intervention in reducing medications, PIM and improving clinical outcomes, using the locally developed Malaysian Potentially Inappropriate Prescribing Screening tool in Older Adults (MALPIP).

    METHODS: This is an 18-month cluster-randomized, open-label, parallel-arm controlled trial conducted at 14 public hospitals in the Perak state of Malaysia. Patients aged 60 and above, who have at least one medication and one comorbidity are eligible. A stratified-cluster randomization design is employed, with 7 hospitals assigned to the control arm and 7 hospitals assigned to the intervention arm. The MALPIP screening tool will be used in the intervention group to review the medications. If PIM is detected, the pharmacists will discuss with doctors and decide whether to stop or reduce the dose. The primary outcomes of this trial are the total number of medications and number of PIM. The secondary outcomes include fall, emergency department visits, readmissions, quality of life and mortality. Outcomes will be measured during enrolment, discharge, 6, 12, and 18 months.

    DISCUSSION: This REVMED trial aims to test the hypothesis that a pharmacist-led deprescribing intervention initiated in the hospital will reduce the total number of medications and PIM 18 months after hospital discharge, reducing fall, emergency department visits, readmissions, mortality and lead to improvement in quality of life. Trial findings will quantify the clinical outcomes associated with reducing medications and PIM for hospitalized older adults with polypharmacy.

    TRIAL REGISTRATION NUMBER: This trial was prospectively registered at clinicaltrials.gov (NCT05875623) on the 25th of May 2023. NCT05875623 Clinicaltrials.gov URL: NCT05875623 registered on 25th July 2023.

  12. Chieng BW, Lee SH, Ibrahim NA, Then YY, Loo YY
    Polymers (Basel), 2017 Aug 11;9(8).
    PMID: 30971032 DOI: 10.3390/polym9080355
    The aim was to explore the utilization of oil palm mesocarp fiber (OPMF) as a source for the production of cellulose nanocrystals (CNC). OPMF was first treated with alkali and then bleached before the production of CNC by acid hydrolysis (H₂SO₄). The produced materials were characterized using Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA), a scanning electron microscope (SEM) and a transmission electron microscope (TEM). It was proven that acid hydrolysis can increase the crystallinity of bleached OPMF and reduce the dimension of cellulose to nano scale. Changes in the peaks of the FTIR spectrum at 2852 (C-H stretching), 1732 (C=O stretching) and 1234 cm-1 (C-O stretching) indicated that the alkali treatment completely removed hemicelluloses and lignin from the fiber surface. This can be seen from the thermogram obtained from the TGA characterization. Morphological characterization clearly showed the formation of rod-shaped CNCs. The promising results prove that OPMF is a valuable source for the production of CNC.
  13. Foo JB, Looi QH, Chong PP, Hassan NH, Yeo GEC, Ng CY, et al.
    Stem Cells Int, 2021;2021:2616807.
    PMID: 34422061 DOI: 10.1155/2021/2616807
    Cell therapy involves the transplantation of human cells to replace or repair the damaged tissues and modulate the mechanisms underlying disease initiation and progression in the body. Nowadays, many different types of cell-based therapy are developed and used to treat a variety of diseases. In the past decade, cell-free therapy has emerged as a novel approach in regenerative medicine after the discovery that the transplanted cells exerted their therapeutic effect mainly through the secretion of paracrine factors. More and more evidence showed that stem cell-derived secretome, i.e., growth factors, cytokines, and extracellular vesicles, can repair the injured tissues as effectively as the cells. This finding has spurred a new idea to employ secretome in regenerative medicine. Despite that, will cell-free therapy slowly replace cell therapy in the future? Or are these two modes of treatment still needed to address different diseases and conditions? This review provides an indepth discussion about the values of stem cells and secretome in regenerative medicine. In addition, the safety, efficacy, advantages, and disadvantages of using these two modes of treatment in regenerative medicine are also critically reviewed.
  14. Hakimi NMF, Lee SH, Lum WC, Mohamad SF, Osman Al Edrus SS, Park BD, et al.
    Polymers (Basel), 2021 Sep 24;13(19).
    PMID: 34641056 DOI: 10.3390/polym13193241
    Natural rubber is of significant economic importance owing to its excellent resilience, elasticity, abrasion and impact resistance. Despite that, natural rubber has been identified with some drawbacks such as low modulus and strength and therefore opens up the opportunity for adding a reinforcing agent. Apart from the conventional fillers such as silica, carbon black and lignocellulosic fibers, nanocellulose is also one of the ideal candidates. Nanocellulose is a promising filler with many excellent properties such as renewability, biocompatibility, non-toxicity, reactive surface, low density, high specific surface area, high tensile and elastic modulus. However, it has some limitations in hydrophobicity, solubility and compatibility and therefore it is very difficult to achieve good dispersion and interfacial properties with the natural rubber matrix. Surface modification is often carried out to enhance the interfacial compatibilities between nanocellulose and natural rubber and to alleviate difficulties in dispersing them in polar solvents or polymers. This paper aims to highlight the different surface modification methods employed by several researchers in modifying nanocellulose and its reinforcement effects in the natural rubber matrix. The mechanism of the different surface medication methods has been discussed. The review also lists out the conventional filler that had been used as reinforcing agent for natural rubber. The challenges and future prospective has also been concluded in the last part of this review.
  15. Ho WK, Tai MC, Dennis J, Shu X, Li J, Ho PJ, et al.
    Genet Med, 2022 Mar;24(3):586-600.
    PMID: 34906514 DOI: 10.1016/j.gim.2021.11.008
    PURPOSE: Non-European populations are under-represented in genetics studies, hindering clinical implementation of breast cancer polygenic risk scores (PRSs). We aimed to develop PRSs using the largest available studies of Asian ancestry and to assess the transferability of PRS across ethnic subgroups.

    METHODS: The development data set comprised 138,309 women from 17 case-control studies. PRSs were generated using a clumping and thresholding method, lasso penalized regression, an Empirical Bayes approach, a Bayesian polygenic prediction approach, or linear combinations of multiple PRSs. These PRSs were evaluated in 89,898 women from 3 prospective studies (1592 incident cases).

    RESULTS: The best performing PRS (genome-wide set of single-nucleotide variations [formerly single-nucleotide polymorphism]) had a hazard ratio per unit SD of 1.62 (95% CI = 1.46-1.80) and an area under the receiver operating curve of 0.635 (95% CI = 0.622-0.649). Combined Asian and European PRSs (333 single-nucleotide variations) had a hazard ratio per SD of 1.53 (95% CI = 1.37-1.71) and an area under the receiver operating curve of 0.621 (95% CI = 0.608-0.635). The distribution of the latter PRS was different across ethnic subgroups, confirming the importance of population-specific calibration for valid estimation of breast cancer risk.

    CONCLUSION: PRSs developed in this study, from association data from multiple ancestries, can enhance risk stratification for women of Asian ancestry.

  16. Jia Y, Luo B, Lee SH, Huang H, Wu Z, Zhou B, et al.
    Int J Biol Macromol, 2024 Jan;256(Pt 2):128548.
    PMID: 38043656 DOI: 10.1016/j.ijbiomac.2023.128548
    A flame retardant high-performance gelatinized starch (GS)-ammonium dihydrogen phosphate (ADP) wood adhesive, named GS-ADP adhesive was prepared by condensation of GS and ADP under acidic condition. The preparation process of GS-ADP adhesive is very simple by mixing and stirring GS and ADP evenly at room temperature. The results revealed that the GS-ADP adhesive has good storage stability and water resistance, and its wet shear strength is much higher than that of phenolic resin (PF) adhesive. Markedly, the cone calorimeter test results show that G-ADP adhesive has good flame retardancy, and the plywood based on GS-ADP adhesive has good flame retardancy. Meanwhile, it can be seen from dynamic mechanical analysis (DMA) and thermogravimetric analysis (TGA) that GS-ADP has excellent modulus of elasticity (MOE), high glass transition temperature (Tg) and good thermal stability. The findings suggest that GS-ADP could be a viable substitute for PF resin in structural wood fabrication.
  17. Katelaris CH, Lai CK, Rhee CS, Lee SH, Yun WD, Lim-Varona L, et al.
    Am J Rhinol Allergy, 2011 Sep-Oct;25 Suppl 1:S3-15.
    PMID: 22185687 DOI: 10.2500/ajra.2011.25.3674
    The Allergies in Asia-Pacific Survey describes the symptoms, impact, and treatment of allergic rhinitis (AR) across Australia, China, Hong Kong, Malaysia, Singapore, Taiwan, Vietnam, and the Philippines. The Allergies in Asia-Pacific Survey was undertaken to further clarify the prevalence of physician-diagnosed nasal allergies (NAs), impact on quality-of-life (QOL), existing treatment paradigms and gaps, and NA medications currently used in treatment.
  18. Kim HJ, Lee SH, Chang BS, Lee CK, Lim TO, Hoo LP, et al.
    Spine (Phila Pa 1976), 2015 Jan 15;40(2):87-94.
    PMID: 25575085 DOI: 10.1097/BRS.0000000000000680
    Prospective randomized controlled trial.
  19. Kim T, Hong JK, Oem JK, Lee KN, Lee HS, Kim YJ, et al.
    Vaccine, 2019 03 14;37(12):1702-1709.
    PMID: 30712811 DOI: 10.1016/j.vaccine.2018.11.080
    After massive foot-and-mouth disease (FMD) outbreaks originated from Jincheon County from Dec. 2014 to Apr. 2015, the effectiveness of the previous FMD vaccine containing only the O1 Manisa as the O antigen, O1 Manisa + A Malaysia 97 + Asia 1 Sharmir trivalent vaccine, was questioned in South Korea, and a change in the O antigen in FMD vaccines was demanded to control the FMD caused by FMDV O/Jincheon/SKR/2014, the O Jincheon strain. Therefore, the efficacies of O1 Manisa + O 3039 bivalent vaccine and O 3039 monovalent vaccine were studied for cross-protection against heterologous challenge with the O Jincheon strain. In this study, the efficacy of the O1 Manisa + O 3039 bivalent vaccine was better than that of the O 3039 monovalent vaccine, even though the serological relationship (r1 value) between O Jincheon and O 3039 was matched according to the OIE Terrestrial Manual. According to serological test results from vaccinated specific pathogen free pigs, virus neutralization test titers against Jincheon were good estimates for predicting protection against challenge. A field trial of the O1 Manisa + O 3039 bivalent vaccine was performed to estimate the possibility of field application in conventional pig farms, especially due to concerns about the effect of maternally derived antibodies (MDA) in field application of the FMD vaccine. According to the result of the field trial, the O1 Manisa + O 3039 bivalent vaccine was considered to overcome MDA. The results of the efficacy and field trials indicated that the O1 Manisa + O3039 vaccine could be suitable to replace previous FMD vaccines to control the FMD field situation caused by O Jincheon FMDV.
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links