Displaying publications 1 - 20 of 274 in total

Abstract:
Sort:
  1. Evidence for the Higgs Boson Decay to a Z Boson and a Photon at the LHC
    Aad G, Abbott B, Abeling K, Abicht NJ, Abidi SH, Aboulhorma A, et al.
    Phys Rev Lett, 2024 Jan 12;132(2):021803.
    PMID: 38277607 DOI: 10.1103/PhysRevLett.132.021803
    The first evidence for the Higgs boson decay to a Z boson and a photon is presented, with a statistical significance of 3.4 standard deviations. The result is derived from a combined analysis of the searches performed by the ATLAS and CMS Collaborations with proton-proton collision datasets collected at the CERN Large Hadron Collider (LHC) from 2015 to 2018. These correspond to integrated luminosities of around 140  fb^{-1} for each experiment, at a center-of-mass energy of 13 TeV. The measured signal yield is 2.2±0.7 times the standard model prediction, and agrees with the theoretical expectation within 1.9 standard deviations.
  2. Fulltext Agarose-resolvable InDel markers based on whole genome re-sequencing in cucumber
    Adedze YMN, Lu X, Xia Y, Sun Q, Nchongboh CG, Alam MA, et al.
    Sci Rep, 2021 02 16;11(1):3872.
    PMID: 33594240 DOI: 10.1038/s41598-021-83313-x
    Insertion and Deletion (InDel) are common features in genomes and are associated with genetic variation. The whole-genome re-sequencing data from two parents (X1 and X2) of the elite cucumber (Cucumis sativus) hybrid variety Lvmei No.1 was used for genome-wide InDel polymorphisms analysis. Obtained sequence reads were mapped to the genome reference sequence of Chinese fresh market type inbred line '9930' and gaps conforming to InDel were pinpointed. Further, the level of cross-parents polymorphism among five pairs of cucumber breeding parents and their corresponding hybrid varieties were used for evaluating hybrid seeds purity test efficiency of InDel markers. A panel of 48 cucumber breeding lines was utilized for PCR amplification versatility and phylogenetic analysis of these markers. In total, 10,470 candidate InDel markers were identified for X1 and X2. Among these, 385 markers with more than 30 nucleotide difference were arbitrary chosen. These markers were selected for experimental resolvability through electrophoresis on an Agarose gel. Two hundred and eleven (211) accounting for 54.81% of markers could be validated as single and clear polymorphic pattern while 174 (45.19%) showed unclear or monomorphic genetic bands between X1 and X2. Cross-parents polymorphism evaluation recorded 68 (32.23%) of these markers, which were designated as cross-parents transferable (CPT) InDel markers. Interestingly, the marker InDel114 presented experimental transferability between cucumber and melon. A panel of 48 cucumber breeding lines including parents of Lvmei No. 1 subjected to PCR amplification versatility using CPT InDel markers successfully clustered them into fruit and common cucumber varieties based on phylogenetic analysis. It is worth noting that 16 of these markers were predominately associated to enzymatic activities in cucumber. These agarose-based InDel markers could constitute a valuable resource for hybrid seeds purity testing, germplasm classification and marker-assisted breeding in cucumber.
  3. Fulltext Investigating the Effect of COVID-19 on Driver Behavior and Road Safety: A Naturalistic Driving Study in Malaysia
    Al-Hussein WA, Li W, Por LY, Ku CS, Alredany WHD, Leesri T, et al.
    Int J Environ Res Public Health, 2022 Sep 07;19(18).
    PMID: 36141497 DOI: 10.3390/ijerph191811224
    The spread of the novel coronavirus COVID-19 resulted in unprecedented worldwide countermeasures such as lockdowns and suspensions of all retail, recreational, and religious activities for the majority of 2020. Nonetheless, no adequate scientific data have been provided thus far about the impact of COVID-19 on driving behavior and road safety, especially in Malaysia. This study examined the effect of COVID-19 on driving behavior using naturalistic driving data. This was accomplished by comparing the driving behaviors of the same drivers in three periods: before COVID-19 lockdown, during COVID-19 lockdown, and after COVID-19 lockdown. Thirty people were previously recruited in 2019 to drive an instrumental vehicle on a 25 km route while recording their driving data such as speed, acceleration, deceleration, distance to vehicle ahead, and steering. The data acquisition system incorporated various sensors such as an OBDII reader, a lidar, two ultrasonic sensors, an IMU, and a GPS. The same individuals were contacted again in 2020 to drive the same vehicle on the same route in order to capture their driving behavior during the COVID-19 lockdown. Participants were approached once again in 2022 to repeat the procedure in order to capture their driving behavior after the COVID-19 lockdown. Such valuable and trustworthy data enable the assessment of changes in driving behavior throughout the three time periods. Results showed that drivers committed more violations during the COVID-19 lockdown, with young drivers in particular being most affected by the traffic restrictions, driving significantly faster and performing more aggressive steering behaviors during the COVID-19 lockdown than any other time. Furthermore, the locations where the most speeding offenses were committed are highlighted in order to provide lawmakers with guidance on how to improve traffic safety in those areas, in addition to various recommendations on how to manage traffic during future lockdowns.
  4. Fulltext Critical physicochemical attributes of chitosan nanoparticles admixed lactose-PEG 3000 microparticles in pulmonary inhalation
    Alhajj N, Zakaria Z, Naharudin I, Ahsan F, Li W, Wong TW
    Asian J Pharm Sci, 2020 May;15(3):374-384.
    PMID: 32636955 DOI: 10.1016/j.ajps.2019.02.001
    Chitosan nanoparticles are exhalation prone and agglomerative to pulmonary inhalation. Blending nanoparticles with lactose microparticles (∼5 µm) could mutually reduce their agglomeration through surface adsorption phenomenon. The chitosan nanoparticles of varying size, size distribution, zeta potential, crystallinity, shape and surface roughness were prepared by spray drying technique as a function of chitosan, surfactant and processing conditions. Lactose-polyethylene glycol 3000 (PEG3000) microparticles were similarly prepared. The chitosan nanoparticles, physically blended with fine lactose-PEG3000 microparticles, exhibited a comparable inhalation performance with the commercial dry powder inhaler products (fine particle fraction between 20% and 30%). Cascade impactor analysis indicated that the aerosolization and inhalation performance of chitosan nanoparticles was promoted by their higher zeta potential and circularity, and larger size attributes of which led to reduced inter-nanoparticulate aggregation and favored nanoparticles interacting with lactose-PEG3000 micropaticles that aided their delivery into deep and peripheral lungs.
  5. Fulltext Assessing generalisability of deep learning-based polyp detection and segmentation methods through a computer vision challenge
    Ali S, Ghatwary N, Jha D, Isik-Polat E, Polat G, Yang C, et al.
    Sci Rep, 2024 Jan 23;14(1):2032.
    PMID: 38263232 DOI: 10.1038/s41598-024-52063-x
    Polyps are well-known cancer precursors identified by colonoscopy. However, variability in their size, appearance, and location makes the detection of polyps challenging. Moreover, colonoscopy surveillance and removal of polyps are highly operator-dependent procedures and occur in a highly complex organ topology. There exists a high missed detection rate and incomplete removal of colonic polyps. To assist in clinical procedures and reduce missed rates, automated methods for detecting and segmenting polyps using machine learning have been achieved in past years. However, the major drawback in most of these methods is their ability to generalise to out-of-sample unseen datasets from different centres, populations, modalities, and acquisition systems. To test this hypothesis rigorously, we, together with expert gastroenterologists, curated a multi-centre and multi-population dataset acquired from six different colonoscopy systems and challenged the computational expert teams to develop robust automated detection and segmentation methods in a crowd-sourcing Endoscopic computer vision challenge. This work put forward rigorous generalisability tests and assesses the usability of devised deep learning methods in dynamic and actual clinical colonoscopy procedures. We analyse the results of four top performing teams for the detection task and five top performing teams for the segmentation task. Our analyses demonstrate that the top-ranking teams concentrated mainly on accuracy over the real-time performance required for clinical applicability. We further dissect the devised methods and provide an experiment-based hypothesis that reveals the need for improved generalisability to tackle diversity present in multi-centre datasets and routine clinical procedures.
  6. Fulltext Contrasting Associations Between Diabetes and Cardiovascular Mortality Rates in Low-, Middle-, and High-Income Countries: Cohort Study Data From 143,567 Individuals in 21 Countries in the PURE Study
    Anjana RM, Mohan V, Rangarajan S, Gerstein HC, Venkatesan U, Sheridan P, et al.
    Diabetes Care, 2020 12;43(12):3094-3101.
    PMID: 33060076 DOI: 10.2337/dc20-0886
    OBJECTIVE: We aimed to compare cardiovascular (CV) events, all-cause mortality, and CV mortality rates among adults with and without diabetes in countries with differing levels of income.

    RESEARCH DESIGN AND METHODS: The Prospective Urban Rural Epidemiology (PURE) study enrolled 143,567 adults aged 35-70 years from 4 high-income countries (HIC), 12 middle-income countries (MIC), and 5 low-income countries (LIC). The mean follow-up was 9.0 ± 3.0 years.

    RESULTS: Among those with diabetes, CVD rates (LIC 10.3, MIC 9.2, HIC 8.3 per 1,000 person-years, P < 0.001), all-cause mortality (LIC 13.8, MIC 7.2, HIC 4.2 per 1,000 person-years, P < 0.001), and CV mortality (LIC 5.7, MIC 2.2, HIC 1.0 per 1,000 person-years, P < 0.001) were considerably higher in LIC compared with MIC and HIC. Within LIC, mortality was higher in those in the lowest tertile of wealth index (low 14.7%, middle 10.8%, and high 6.5%). In contrast to HIC and MIC, the increased CV mortality in those with diabetes in LIC remained unchanged even after adjustment for behavioral risk factors and treatments (hazard ratio [95% CI] 1.89 [1.58-2.27] to 1.78 [1.36-2.34]).

    CONCLUSIONS: CVD rates, all-cause mortality, and CV mortality were markedly higher among those with diabetes in LIC compared with MIC and HIC with mortality risk remaining unchanged even after adjustment for risk factors and treatments. There is an urgent need to improve access to care to those with diabetes in LIC to reduce the excess mortality rates, particularly among those in the poorer strata of society.

  7. Searches for electroweak production of charginos, neutralinos, and sleptons decaying to leptons and W, Z, and Higgs bosons in pp collisions at 8 TeV
    CMS Collaboration, Khachatryan V, Sirunyan AM, Tumasyan A, Adam W, Bergauer T, et al.
    Eur Phys J C Part Fields, 2014 09 26;74(9):3036.
    PMID: 25814912
    Searches for the direct electroweak production of supersymmetric charginos, neutralinos, and sleptons in a variety of signatures with leptons and [Formula: see text], [Formula: see text], and Higgs bosons are presented. Results are based on a sample of proton-proton collision data collected at center-of-mass energy [Formula: see text] with the CMS detector in 2012, corresponding to an integrated luminosity of 19.5 [Formula: see text]. The observed event rates are in agreement with expectations from the standard model. These results probe charginos and neutralinos with masses up to 720 [Formula: see text], and sleptons up to 260 [Formula: see text], depending on the model details.
  8. Fulltext MUSiC: a model-unspecific search for new physics in proton-proton collisions at s = 13 TeV
    CMS Collaboration, Sirunyan AM, Tumasyan A, Adam W, Ambrogi F, Bergauer T, et al.
    Eur Phys J C Part Fields, 2021;81(7):629.
    PMID: 34727144 DOI: 10.1140/epjc/s10052-021-09236-z
    Results of the Model Unspecific Search in CMS (MUSiC), using proton-proton collision data recorded at the LHC at a centre-of-mass energy of 13 TeV , corresponding to an integrated luminosity of 35.9 fb - 1 , are presented. The MUSiC analysis searches for anomalies that could be signatures of physics beyond the standard model. The analysis is based on the comparison of observed data with the standard model prediction, as determined from simulation, in several hundred final states and multiple kinematic distributions. Events containing at least one electron or muon are classified based on their final state topology, and an automated search algorithm surveys the observed data for deviations from the prediction. The sensitivity of the search is validated using multiple methods. No significant deviations from the predictions have been observed. For a wide range of final state topologies, agreement is found between the data and the standard model simulation. This analysis complements dedicated search analyses by significantly expanding the range of final states covered using a model independent approach with the largest data set to date to probe phase space regions beyond the reach of previous general searches.
  9. Measurement of top quark-antiquark pair production in association with a W or Z boson in pp collisions at [Formula: see text][Formula: see text]
    CMS Collaboration, Khachatryan V, Sirunyan AM, Tumasyan A, Adam W, Bergauer T, et al.
    Eur Phys J C Part Fields, 2014 09 17;74(9):3060.
    PMID: 25814914
    A measurement of the cross section for the production of top quark-antiquark pairs ([Formula: see text]) in association with a vector boson V (W or Z) in proton-proton collisions at [Formula: see text][Formula: see text] is presented. The results are based on a dataset corresponding to an integrated luminosity of 19.5 fb[Formula: see text] recorded with the CMS detector at the LHC. The measurement is performed in three leptonic (e and [Formula: see text]) channels: a same-sign dilepton analysis targeting [Formula: see text] events, and trilepton and four-lepton analyses designed for [Formula: see text] events. In the same-sign dilepton channel, the [Formula: see text] cross section is measured as [Formula: see text], corresponding to a significance of 1.6 standard deviations over the background-only hypothesis. Combining the trilepton and four-lepton channels, a direct measurement of the [Formula: see text] cross section, [Formula: see text], is obtained with a significance of 3.1 standard deviations. The measured cross sections are compatible with standard model predictions within their experimental uncertainties. The inclusive [Formula: see text] process is observed with a significance of 3.7 standard deviations from the combination of all three leptonic channels.
  10. Measurement of WZ and ZZ production in pp collisions at [Formula: see text] in final states with b-tagged jets
    CMS Collaboration, Chatrchyan S, Khachatryan V, Sirunyan AM, Tumasyan A, Adam W, et al.
    Eur Phys J C Part Fields, 2014 08 07;74(8):2973.
    PMID: 25814904
    Measurements are reported of the WZ and ZZ production cross sections in proton-proton collisions at [Formula: see text][Formula: see text] in final states where one Z boson decays to b-tagged jets. The other gauge boson, either W or Z, is detected through its leptonic decay (either [Formula: see text], [Formula: see text] or [Formula: see text], [Formula: see text], or [Formula: see text]). The results are based on data corresponding to an integrated luminosity of 18.9 fb[Formula: see text] collected with the CMS detector at the Large Hadron Collider. The measured cross sections, [Formula: see text] and [Formula: see text], are consistent with next-to-leading order quantum chromodynamics calculations.
  11. Measurement of jet multiplicity distributions in [Formula: see text] production in pp collisions at [Formula: see text]
    CMS Collaboration, Chatrchyan S, Khachatryan V, Sirunyan AM, Tumasyan A, Adam W, et al.
    Eur Phys J C Part Fields, 2014 08 20;74(8):3014.
    PMID: 25814909
    The normalised differential top quark-antiquark production cross section is measured as a function of the jet multiplicity in proton-proton collisions at a centre-of-mass energy of 7[Formula: see text] at the LHC with the CMS detector. The measurement is performed in both the dilepton and lepton+jets decay channels using data corresponding to an integrated luminosity of 5.0[Formula: see text]. Using a procedure to associate jets to decay products of the top quarks, the differential cross section of the [Formula: see text] production is determined as a function of the additional jet multiplicity in the lepton+jets channel. Furthermore, the fraction of events with no additional jets is measured in the dilepton channel, as a function of the threshold on the jet transverse momentum. The measurements are compared with predictions from perturbative quantum chromodynamics and no significant deviations are observed.
  12. Fulltext Measurements of production cross sections of the Higgs boson in the four-lepton final state in proton-proton collisions at s = 13 TeV
    CMS Collaboration, Sirunyan AM, Tumasyan A, Adam W, Andrejkovic JW, Bergauer T, et al.
    Eur Phys J C Part Fields, 2021;81(6):488.
    PMID: 34727143 DOI: 10.1140/epjc/s10052-021-09200-x
    Production cross sections of the Higgs boson are measured in the H → Z Z → 4 ℓ ( ℓ = e , μ ) decay channel. A data sample of proton-proton collisions at a center-of-mass energy of 13 TeV , collected by the CMS detector at the LHC and corresponding to an integrated luminosity of 137 fb - 1 is used. The signal strength modifier μ , defined as the ratio of the Higgs boson production rate in the 4 ℓ channel to the standard model (SM) expectation, is measured to be μ = 0.94 ± 0.07 (stat) - 0.08 + 0.09 (syst) at a fixed value of m H = 125.38 GeV . The signal strength modifiers for the individual Higgs boson production modes are also reported. The inclusive fiducial cross section for the H → 4 ℓ process is measured to be 2 . 84 - 0.22 + 0.23 (stat) - 0.21 + 0.26 (syst) fb , which is compatible with the SM prediction of 2.84 ± 0.15 fb for the same fiducial region. Differential cross sections as a function of the transverse momentum and rapidity of the Higgs boson, the number of associated jets, and the transverse momentum of the leading associated jet are measured. A new set of cross section measurements in mutually exclusive categories targeted to identify production mechanisms and kinematical features of the events is presented. The results are in agreement with the SM predictions.
  13. Fulltext Search for direct pair production of supersymmetric partners to the τ lepton in proton-proton collisions at s = 13 TeV
    CMS Collaboration, Sirunyan AM, Tumasyan A, Adam W, Ambrogi F, Bergauer T, et al.
    Eur Phys J C Part Fields, 2020;80(3):189.
    PMID: 32226948 DOI: 10.1140/epjc/s10052-020-7739-7
    A search is presented for τ slepton pairs produced in proton-proton collisions at a center-of-mass energy of 13 TeV . The search is carried out in events containing two τ leptons in the final state, on the assumption that each τ slepton decays primarily to a τ lepton and a neutralino. Events are considered in which each τ lepton decays to one or more hadrons and a neutrino, or in which one of the τ leptons decays instead to an electron or a muon and two neutrinos. The data, collected with the CMS detector in 2016 and 2017, correspond to an integrated luminosity of 77.2 fb - 1 . The observed data are consistent with the standard model background expectation. The results are used to set 95% confidence level upper limits on the cross section for τ slepton pair production in various models for τ slepton masses between 90 and 200 GeV and neutralino masses of 1, 10, and 20 GeV . In the case of purely left-handed τ slepton production and decay to a τ lepton and a neutralino with a mass of 1 GeV , the strongest limit is obtained for a τ slepton mass of 125 GeV at a factor of 1.14 larger than the theoretical cross section.
  14. Measurement of differential cross sections for the production of a pair of isolated photons in pp collisions at [Formula: see text]
    CMS Collaboration, Chatrchyan S, Khachatryan V, Sirunyan AM, Tumasyan A, Adam W, et al.
    Eur Phys J C Part Fields, 2014 11 12;74(11):3129.
    PMID: 25814874
    A measurement of differential cross sections for the production of a pair of isolated photons in proton-proton collisions at [Formula: see text] is presented. The data sample corresponds to an integrated luminosity of 5.0[Formula: see text] collected with the CMS detector. A data-driven isolation template method is used to extract the prompt diphoton yield. The measured cross section for two isolated photons, with transverse energy above 40 and 25[Formula: see text] respectively, in the pseudorapidity range [Formula: see text], [Formula: see text] and with an angular separation [Formula: see text], is [Formula: see text][Formula: see text]. Differential cross sections are measured as a function of the diphoton invariant mass, the diphoton transverse momentum, the azimuthal angle difference between the two photons, and the cosine of the polar angle in the Collins-Soper reference frame of the diphoton system. The results are compared to theoretical predictions at leading, next-to-leading, and next-to-next-to-leading order in quantum chromodynamics.
  15. Fulltext Search for heavy neutrinos and [Formula: see text] bosons with right-handed couplings in proton-proton collisions at [Formula: see text]
    CMS Collaboration, Khachatryan V, Sirunyan AM, Tumasyan A, Adam W, Bergauer T, et al.
    Eur Phys J C Part Fields, 2014;74(11):3149.
    PMID: 25814876 DOI: 10.1140/epjc/s10052-014-3149-z
    A search for heavy, right-handed neutrinos, [Formula: see text] ([Formula: see text]), and right-handed [Formula: see text] bosons, which arise in the left-right symmetric extensions of the standard model, has been performed by the CMS experiment. The search was based on a sample of two lepton plus two jet events collected in proton-proton collisions at a center-of-mass energy of 8[Formula: see text] corresponding to an integrated luminosity of 19.7 [Formula: see text]. For models with strict left-right symmetry, and assuming only one [Formula: see text] flavor contributes significantly to the [Formula: see text] decay width, the region in the two-dimensional [Formula: see text] mass plane excluded at a 95 % confidence level extends to approximately [Formula: see text] and covers a large range of neutrino masses below the [Formula: see text] boson mass, depending on the value of [Formula: see text]. This search significantly extends the [Formula: see text] exclusion region beyond previous results.
  16. Search for top squark and Higgsino production using diphoton Higgs boson decays
    Chatrchyan S, Khachatryan V, Sirunyan AM, Tumasyan A, Adam W, Bergauer T, et al.
    Phys Rev Lett, 2014 Apr 25;112(16):161802.
    PMID: 24815637
    Results are presented of a search for a "natural" supersymmetry scenario with gauge mediated symmetry breaking. It is assumed that only the supersymmetric partners of the top quark (the top squark) and the Higgs boson (Higgsino) are accessible. Events are examined in which there are two photons forming a Higgs boson candidate, and at least two b-quark jets. In 19.7  fb-1 of proton-proton collision data at s=8  TeV, recorded in the CMS experiment, no evidence of a signal is found and lower limits at the 95% confidence level are set, excluding the top squark mass below 360 to 410 GeV, depending on the Higgsino mass.
  17. Search for invisible decays of Higgs bosons in the vector boson fusion and associated ZH production modes
    Chatrchyan S, Khachatryan V, Sirunyan AM, Tumasyan A, Adam W, Bergauer T, et al.
    Eur Phys J C Part Fields, 2014;74(8):2980.
    PMID: 25814906
    A search for invisible decays of Higgs bosons is performed using the vector boson fusion and associated ZH production modes. In the ZH mode, the Z boson is required to decay to a pair of charged leptons or a [Formula: see text] quark pair. The searches use the 8 [Formula: see text] pp collision dataset collected by the CMS detector at the LHC, corresponding to an integrated luminosity of up to 19.7 [Formula: see text]. Certain channels include data from 7 [Formula: see text] collisions corresponding to an integrated luminosity of 4.9 [Formula: see text]. The searches are sensitive to non-standard-model invisible decays of the recently observed Higgs boson, as well as additional Higgs bosons with similar production modes and large invisible branching fractions. In all channels, the observed data are consistent with the expected standard model backgrounds. Limits are set on the production cross section times invisible branching fraction, as a function of the Higgs boson mass, for the vector boson fusion and ZH production modes. By combining all channels, and assuming standard model Higgs boson cross sections and acceptances, the observed (expected) upper limit on the invisible branching fraction at [Formula: see text] [Formula: see text] is found to be 0.58 (0.44) at 95 % confidence level. We interpret this limit in terms of a Higgs-portal model of dark matter interactions.
  18. A comparative study on complete and implant retained denture treatments: a biomechanics perspective
    Chen J, Ahmad R, Suenaga H, Li W, Swain M, Li Q
    J Biomech, 2015 Feb 5;48(3):512-9.
    PMID: 25560272 DOI: 10.1016/j.jbiomech.2014.11.043
    Although implant-retained overdenture allows edentulous patients to take higher occlusal forces than the conventional complete dentures, the biomechanical influences have not been explored yet. Clinically, there is limited knowledge and means for predicting localized bone remodelling after denture treatment with and without implant support. By using finite element (FE) analysis, this article provides an in-silico approach to exploring the treatment effects on the oral mucosa and potential resorption of residual ridge under three different denture configurations in a patient-specific manner. Based on cone beam computerized tomography (CBCT) scans, a 3D heterogeneous FE model was created; and the supportive tissue, mucosa, was characterized as a hyperelastic material. A measured occlusal load (63N) was applied onto three virtual models, namely complete denture, two and four implant-retained overdentures. Clinically, the bone resorption was measured after one year in the two implant-retained overdenture treatment. Despite the improved stability and enhanced masticatory function, the implant-retained overdentures demonstrated higher hydrostatic stress in mucosa (43.6kPa and 39.9kPa for two and four implants) at the posterior ends of the mandible due to the cantilever effect, than the complete denture (33.4kPa). Hydrostatic pressure in the mucosa signifies a critical indicator and can be correlated with clinically measured bone resorption, pointing to severer mandibular ridge resorption posteriorly with implant-retained overdentures. This study provides a biomechanical basis for denture treatment planning to improve long-term outcomes with minimal residual ridge resorption.
  19. Fulltext Shape Optimization for Additive Manufacturing of Removable Partial Dentures--A New Paradigm for Prosthetic CAD/CAM
    Chen J, Ahmad R, Suenaga H, Li W, Sasaki K, Swain M, et al.
    PLoS One, 2015;10(7):e0132552.
    PMID: 26161878 DOI: 10.1371/journal.pone.0132552
    With ever-growing aging population and demand for denture treatments, pressure-induced mucosa lesion and residual ridge resorption remain main sources of clinical complications. Conventional denture design and fabrication are challenged for its labor and experience intensity, urgently necessitating an automatic procedure. This study aims to develop a fully automatic procedure enabling shape optimization and additive manufacturing of removable partial dentures (RPD), to maximize the uniformity of contact pressure distribution on the mucosa, thereby reducing associated clinical complications. A 3D heterogeneous finite element (FE) model was constructed from CT scan, and the critical tissue of mucosa was modeled as a hyperelastic material from in vivo clinical data. A contact shape optimization algorithm was developed based on the bi-directional evolutionary structural optimization (BESO) technique. Both initial and optimized dentures were prototyped by 3D printing technology and evaluated with in vitro tests. Through the optimization, the peak contact pressure was reduced by 70%, and the uniformity was improved by 63%. In vitro tests verified the effectiveness of this procedure, and the hydrostatic pressure induced in the mucosa is well below clinical pressure-pain thresholds (PPT), potentially lessening risk of residual ridge resorption. This proposed computational optimization and additive fabrication procedure provides a novel method for fast denture design and adjustment at low cost, with quantitative guidelines and computer aided design and manufacturing (CAD/CAM) for a specific patient. The integration of digitalized modeling, computational optimization, and free-form fabrication enables more efficient clinical adaptation. The customized optimal denture design is expected to minimize pain/discomfort and potentially reduce long-term residual ridge resorption.
  20. Fulltext Biomechanics of oral mucosa
    Chen J, Ahmad R, Li W, Swain M, Li Q
    J R Soc Interface, 2015 Aug 06;12(109):20150325.
    PMID: 26224566 DOI: 10.1098/rsif.2015.0325
    The prevalence of prosthodontic treatment has been well recognized, and the need is continuously increasing with the ageing population. While the oral mucosa plays a critical role in the treatment outcome, the associated biomechanics is not yet fully understood. Using the literature available, this paper provides a critical review on four aspects of mucosal biomechanics, including static, dynamic, volumetric and interactive responses, which are interpreted by its elasticity, viscosity/permeability, apparent Poisson's ratio and friction coefficient, respectively. Both empirical studies and numerical models are analysed and compared to gain anatomical and physiological insights. Furthermore, the clinical applications of such biomechanical knowledge on the mucosa are explored to address some critical concerns, including stimuli for tissue remodelling (interstitial hydrostatic pressure), pressure-pain thresholds, tissue displaceability and residual bone resorption. Through this review, the state of the art in mucosal biomechanics and their clinical implications are discussed for future research interests, including clinical applications, computational modelling, design optimization and prosthetic fabrication.
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links