Displaying publications 1 - 20 of 82 in total

Abstract:
Sort:
  1. Mohamad R, Awang N, Kamaludin NF, Jotani MM, Tiekink ER
    Acta Crystallogr E Crystallogr Commun, 2016 Oct 1;72(Pt 10):1480-1487.
    PMID: 27746946
    The crystal and mol-ecular structures of two tri-phenyl-tin di-thio-carbamates, [Sn(C6H5)3(C16H16NS2)], (I), and [Sn(C6H5)3(C7H14NO2S2)], (II), are described. In (I), the di-thio-carbamate ligand coordinates the Sn(IV) atom in an asymmetric manner, leading to a highly distorted trigonal-bipyramidal coordination geometry defined by a C3S2 donor set with the weakly bound S atom approximately trans to one of the ipso-C atoms. A similar structure is found in (II), but the di-thio-carbamate ligand coordinates in an even more asymmetric fashion. The packing in (I) features supra-molecular chains along the c axis sustained by C-H⋯π inter-actions; chains pack with no directional inter-actions between them. In (II), supra-molecular layers are formed, similarly sustained by C-H⋯π inter-actions; these stack along the b axis. An analysis of the Hirshfeld surfaces for (I) and (II) confirms the presence of the C-H⋯π inter-actions but also reveals the overall dominance of H⋯H contacts in the respective crystals.
  2. Jumaidin R, Sapuan SM, Jawaid M, Ishak MR, Sahari J
    Int J Biol Macromol, 2017 Apr;97:606-615.
    PMID: 28109810 DOI: 10.1016/j.ijbiomac.2017.01.079
    The aim of this research is to investigate the effect of sugar palm fibre (SPF) on the mechanical, thermal and physical properties of seaweed/thermoplastic sugar palm starch agar (TPSA) composites. Hybridized seaweed/SPF filler at weight ratio of 25:75, 50:50 and 75:25 were prepared using TPSA as a matrix. Mechanical, thermal and physical properties of hybrid composites were carried out. Obtained results indicated that hybrid composites display improved tensile and flexural properties accompanied with lower impact resistance. The highest tensile (17.74MPa) and flexural strength (31.24MPa) was obtained from hybrid composite with 50:50 ratio of seaweed/SPF. Good fibre-matrix bonding was evident in the scanning electron microscopy (SEM) micrograph of the hybrid composites' tensile fracture. Fourier transform infrared spectroscopy (FT-IR) analysis showed increase in intermolecular hydrogen bonding following the addition of SPF. Thermal stability of hybrid composites was enhanced, indicated by a higher onset degradation temperature (259°C) for 25:75 seaweed/SPF composites than the individual seaweed composites (253°C). Water absorption, thickness swelling, water solubility, and soil burial tests showed higher water and biodegradation resistance of the hybrid composites. Overall, the hybridization of SPF with seaweed/TPSA composites enhances the properties of the biocomposites for short-life application; that is, disposable tray, plate, etc.
  3. Farouk AE, Batcha MF, Greiner R, Salleh HM, Salleh MR, Sirajudin AR
    Saudi Med J, 2006 Sep;27(9):1397-400.
    PMID: 16951781
    To develop a molecular technique that is fast and reliable in detecting porcine contamination or ingredients in foods.
  4. Sooryanarayana R, Choo WY, Hairi NN, Chinna K, Hairi F, Ali ZM, et al.
    BMJ Open, 2017 Sep 01;7(8):e017025.
    PMID: 28864485 DOI: 10.1136/bmjopen-2017-017025
    BACKGROUND: As Malaysia is fast becoming an ageing nation, the health, safety and welfare of elders are major societal concerns. Elder abuse is a phenomenon recognised abroad but less so locally. This paper presents the baseline findings from the Malaysian Elder Mistreatment Project (MAESTRO) study, the first community-based study on elder abuse in Malaysia.

    DESIGN: Cross-sectional study, analysing baseline findings of a cohort of older adults.

    SETTING: Kuala Pilah district, Negeri Sembilan state, Malaysia.

    OBJECTIVES: To determine the prevalence of elder abuse among community dwelling older adults and its associated factors.

    PARTICIPANTS: A total of 2112 community dwelling older adults aged 60 years and above were recruited employing a multistage sampling using the national census.

    PRIMARY AND SECONDARY OUTCOME MEASURES: Elder abuse, measured using a validated instrument derived from previous literature and the modified Conflict Tactic Scales, similar to the Irish national prevalence survey on elder abuse with modification to local context. Factors associated with abuse and profiles of respondents were also examined.

    RESULTS: The prevalence of overall abuse was reported to be 4.5% in the past 12 months. Psychological abuse was most common, followed by financial, physical, neglect and sexual abuse. Two or more occurrences of abusive acts were common, while clustering of various types of abuse was experienced by one-third of abused elders. Being male (adjusted OR (aOR) 2.15, 95% CI 1.23 to 3.78), being at risk of social isolation (aOR 1.96, 95% CI 1.07 to 3.58), a prior history of abuse (aOR 3.28, 95% CI 1.40 to 7.68) and depressive symptomatology (aOR 7.83, 95% CI 2.88 to 21.27) were independently associated with overall abuse.

    CONCLUSION: Elder abuse occurred among one in every 20 elders. The findings on elder abuse indicate the need to enhance elder protection in Malaysia, with both screening of and interventions for elder abuse.

  5. Subramaniam C, Johari J, Mashi MS, Mohamad R
    J Safety Res, 2023 Feb;84:117-128.
    PMID: 36868640 DOI: 10.1016/j.jsr.2022.10.013
    INTRODUCTION: This paper investigates the relationships among safety leadership, safety motivation, safety knowledge, and safety behavior in the setting of a tertiary hospital in Klang Valley, Malaysia.

    METHOD: Underpinned by the self-efficacy theory, we argue that high-quality safety leadership enhances nurses' safety knowledge and motivation and subsequently, improves their safety behavior (safety compliance and safety participation). A total of 332 questionnaire responses were gathered and analyzed using SmartPLS Version 3.2.9, revealing the direct effect of safety leadership on both safety knowledge and safety motivation.

    RESULTS: Safety knowledge and safety motivation were found to directly and significantly predict nurses' safety behavior. Notably, safety knowledge and safety motivation were established as important mediators in the relationship between safety leadership and nurses' safety compliance and participation.

    PRACTICAL APPLICATIONS: The findings of this study offer key guidance for safety researchers and hospital practitioners in identifying mechanisms to enhance safety behavior among nurses.

  6. Haezam FN, Awang N, Kamaludin NF, Mohamad R
    Saudi J Biol Sci, 2021 May;28(5):3160-3168.
    PMID: 34025187 DOI: 10.1016/j.sjbs.2021.02.060
    Context: Diphenyltin(IV) diallyldithiocarbamate compound (Compound 1) and triphenyltin(IV) diallyldithiocarbamate compound (Compound 2) are two newly synthesised compounds of organotin(IV) with diallyldithiocarbamate ligands.

    Objective: To assess the cytotoxic effects of two synthesised compounds against HT-29 human colon adenocarcinoma cells and human CCD-18Co normal colon cells.

    Materials and methods: Two successfully synthesised compounds were characterised using elemental (carbon, hydrogen, nitrogen, and sulphur) analysis, Fourier-Transform Infrared (FTIR), and 1H, 13C 119Sn Nucleus Magnetic Resonance (NMR) spectroscopies. The single-crystal structure of both compounds was determined by X-ray single-crystal analysis. The cytotoxicity of the compounds was assessed using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazholium bromide (MTT) assay upon 24 h of treatment. While the mode of cell death was determined based on the externalisation of phosphatidylserine using a flow cytometer.

    Results: The elemental analysis data of the two compounds showed an agreement with the suggested formula of (C6H5)2Sn[S2CN(C3H5)2]2 for Compound 1 and (C6H5)3Sn[S2CN(C3H5)2] for Compound 2. The two major peaks of infrared absorbance, i.e., ν(C = N) and ν(C = S) were detected at the range of 1475-1479 cm-1 and 972-977 cm-1, respectively. The chemical shift of carbon in NCS2 group for Compound 1 and 2 were found at 200.82 and 197.79 ppm. The crystal structure of Compound 1 showed that it is six coordinated and crystallised in monoclinic, P21/c space group. While the crystal structure of Compound 2 is five coordinated and crystallised in monoclinic, P21/c space group. The cytotoxicity (IC50) of the two compounds against HT-29 cell were 2.36 μM and 0.39 μM. Meanwhile, the percentage of cell death modes between 60% and 75% for compound 1 and compound 2 were mainly due to apoptosis, suggesting that both compounds induced growth arrest.

    Conclusion: Our study concluded that the synthesised compounds showed potent cytotoxicity towards HT-29 cell, with the triphenyltin(IV) compound showing the highest effect compared to diphenyltin(IV).

  7. Mohd Yusof H, Mohamad R, Zaidan UH, Rahman NA
    Microb Cell Fact, 2020 Jan 15;19(1):10.
    PMID: 31941498 DOI: 10.1186/s12934-020-1279-6
    BACKGROUND: The use of microorganisms in the biosynthesis of zinc oxide nanoparticles (ZnO NPs) has recently emerged as an alternative to chemical and physical methods due to its low-cost and eco-friendly method. Several lactic acid bacteria (LAB) have developed mechanisms in tolerating Zn2+ through prevention against their toxicity and the production of ZnO NPs. The LAB's main resistance mechanism to Zn2+ is highly depended on the microorganisms' ability to interact with Zn2+ either through biosorption or bioaccumulation processes. Besides the inadequate studies conducted on biosynthesis with the use of zinc-tolerant probiotics, the understanding regarding the mechanism involved in this process is not clear. Therefore, this study determines the features of probiotic LAB strain TA4 related to its resistance to Zn2+. It also attempts to illustrate its potential in creating a sustainable microbial cell nanofactory of ZnO NPs.

    RESULTS: A zinc-tolerant probiotic strain TA4, which was isolated from local fermented food, was selected based on the principal component analysis (PCA) with the highest score of probiotic attributes. Based on the 16S rRNA gene analysis, this strain was identified as Lactobacillus plantarum strain TA4, indicating its high resistance to Zn2+ at a maximum tolerable concentration (MTC) value of 500 mM and its capability of producing ZnO NPs. The UV-visible spectroscopy analysis proved the formations of ZnO NPs through the notable absorption peak at 380 nm. It was also found from the dynamic light scattering (DLS) analysis that the Z-average particle size amounted to 124.2 nm with monodisperse ZnO NPs. Studies on scanning electron microscope (SEM), energy-dispersive X-ray (EDX) spectroscopy, and Fourier-transform infrared spectroscopy (FT-IR) revealed that the main mechanisms in ZnO NPs biosynthesis were facilitated by the Zn2+ biosorption ability through the functional groups present on the cell surface of strain TA4.

    CONCLUSIONS: The strong ability of zinc-tolerant probiotic of L. plantarum strain TA4 to tolerate high Zn2+ concentration and to produce ZnO NPs highlights the unique properties of these bacteria as a natural microbial cell nanofactory for a more sustainable and eco-friendly practice of ZnO NPs biosynthesis.

  8. Mohd Mydin FH, Othman S, Choo WY, Hairi NNM, Hairi FM, Syed Karim SN, et al.
    J Elder Abuse Negl, 2021 04 25;33(2):151-167.
    PMID: 33899705 DOI: 10.1080/08946566.2021.1919272
    This quasi-experimental study examined the effect of Supporting Family Doctors to Address Elder Abuse (SAFE) educational intervention among family doctors practicing at public primary care clinics in Malaysia. SAFE is an intensive, multimodal, locally tailored, and culturally sensitive face-to-face educational intervention on elder abuse. A significant mean score improvement of knowledge [Baseline: 5.33 (SD:1.33) to 6-month post-intervention: 6.45 (SD: 1.35); p<0.001] and perceived behavioral control [Baseline: 50.83 (SD: 8.87) to six-month post-intervention: 56.16 (SD: 9.56); p<0.001] observed in the intervention group compared to the control group. No significant difference in attitude, subjective norm, and practice scores between the two groups over time. SAFE educational intervention for family doctors was effective to improve but not sustainable knowledge and perceived behavioral control toward elder abuse identification and management. We recommend SAFE educational intervention as part of the continuous medical education for family doctors supplemented with a change in organization and national policy.
  9. Pannerchelvan S, Rios-Solis L, Faizal Wong FW, Zaidan UH, Wasoh H, Mohamed MS, et al.
    Food Funct, 2023 Mar 23.
    PMID: 36951915 DOI: 10.1039/d2fo03936b
    Gamma-aminobutyric acid (GABA) is a non-protein amino acid widely distributed in nature and extensively explored for its numerous physiological functions and effects on metabolic disorders. Lactic acid bacteria (LAB) are one of the most important GABA producers, vigorously pursued due to their high GABA content and generally regarded as safe (GRAS) status that allows for direct formulation in various GABA-enriched food products. To meet the strict requirements of the food and nutraceutical industries, the biosynthesis of GABA is typically preferred over the chemical synthesis route. The production of GABA varies among various strains of LAB and is affected by different fermentation conditions. Hence, optimizing the fermentation conditions to enhance the activity of the key enzyme glutamic acid decarboxylase is essential to maximize GABA production. This paper reviews the beneficial effects of GABA on human health and its applications in fermented food products. A particular emphasis is given to the biosynthetic approach for producing GABA by various LAB species via the microbial fermentation route. Efficient strategies for enhancing GABA production through optimization of the fermentation conditions, mode of fermentation, two-step fermentation, co-culturing approach, immobilization technique and genetic engineering are discussed in detail.
  10. Baharara J, Namvar F, Ramezani T, Mousavi M, Mohamad R
    Molecules, 2015 Feb 05;20(2):2693-706.
    PMID: 25665064 DOI: 10.3390/molecules20022693
    Silver nanoparticles (Ag-NPs), the most popular nanoparticles, possess unique properties. Achillea biebersteinii is a plant of the Asteraceae family rich in active antitumor components. The aim of this research was the characterization and investigation of the cytotoxic properties of Ag-NPs synthesized using A. biebersteinii flower extract, on a human breast cancer cell line. The Ag-NPs were synthesized after approximately 180 min of reaction at 40 °C, then they were characterized by UV-visible spectroscopy, Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM) and dynamic light scattering (DLS). The anti-apoptosis effect of Ag-NPs on the MCF-7 cell line was investigated by MTT assay, DAPI and acridine orange staining and caspase activity. The transcriptional expression of bax, bcl-2, caspase-3, -8 and -9 were also evaluated by RT-PCR. The TEM images revealed that the Ag-NPs morphology had a different shape. The DLS indicated that the average hydrodynamic diameter of the biosynthesized Ag-NPs was around 12 nm. By UV-visible spectroscopy the strongest absorbance peak was observed at 460 nm. The FTIR results also showed interaction between the plant extract and Ag-NPs due to the similarity in the peak patterns. The EDS results showed that Ag-NPs display an absorption peak at 3 keV, indicating the presence of the element silver. The Ag-NPs caused a dose-dependent decrease in cell viability, fragmentation in nucleic acid, inhibited the proliferation and induction of apoptosis on MCF-7 by suppressing specific cell cycle genes, and simulation programmed cell dead genes. Further investigation is required to establish the potential of this novel and promising approach in cancer therapy.
  11. Lim YH, Foo HL, Loh TC, Mohamad R, Abdul Rahim R
    Molecules, 2020 Feb 11;25(4).
    PMID: 32054138 DOI: 10.3390/molecules25040779
    Tryptophan is one of the most extensively used amino acids in livestock industry owing to its effectiveness in enhancing the growth performance of animals. Conventionally, the production of tryptophan relies heavily on genetically modified Escherichia coli but its pathogenicity is a great concern. Our recent study demonstrated that a lactic acid bacterium (LAB), Pediococcus acidilactici TP-6 that isolated from Malaysian food was a promising tryptophan producer. However, the tryptophan production must enhance further for viable industrial application. Hence, the current study evaluated the effects of medium components and optimized the medium composition for tryptophan production by P. acidilactici TP-6 statistically using Plackett-Burman Design, and Central Composite Design. The optimized medium containing molasses (14.06 g/L), meat extract (23.68 g/L), urea (5.56 g/L) and FeSO4 (0.024 g/L) significantly enhanced the tryptophan production by 150% as compared to the control de Man, Rogosa and Sharpe medium. The findings obtained in this study revealed that rapid evaluation and effective optimization of medium composition governing tryptophan production by P. acidilactici TP-6 were feasible via statistical approaches. Additionally, the current findings reveal the potential of utilizing LAB as a safer alternative tryptophan producer and provides insight for future exploitation of various amino acid productions by LAB.
  12. Nematzadeh H, Motameni H, Mohamad R, Nematzadeh Z
    ScientificWorldJournal, 2014;2014:847930.
    PMID: 25110748 DOI: 10.1155/2014/847930
    Workflow-based web service compositions (WB-WSCs) is one of the main composition categories in service oriented architecture (SOA). Eflow, polymorphic process model (PPM), and business process execution language (BPEL) are the main techniques of the category of WB-WSCs. Due to maturity of web services, measuring the quality of composite web services being developed by different techniques becomes one of the most important challenges in today's web environments. Business should try to provide good quality regarding the customers' requirements to a composed web service. Thus, quality of service (QoS) which refers to nonfunctional parameters is important to be measured since the quality degree of a certain web service composition could be achieved. This paper tried to find a deterministic analytical method for dependability and performance measurement using Colored Petri net (CPN) with explicit routing constructs and application of theory of probability. A computer tool called WSET was also developed for modeling and supporting QoS measurement through simulation.
  13. Nawawi MH, Mohamad R, Tahir PM, Asa'ari AZ, Saad WZ
    Molecules, 2021 Jul 14;26(14).
    PMID: 34299554 DOI: 10.3390/molecules26144279
    The present work reports the biobleaching effect on OPEFB pulp upon utilisation of extracellular xylano-pectinolytic enzymes simultaneously yielded from Bacillus amyloliquefaciens ADI2. The impacts of different doses, retention times, pH, and temperatures required for the pulp biobleaching process were delineated accordingly. Here, the OPEFB pulp was subjected to pre-treatment with xylano-pectinolytic enzymes generated from the same alkalo-thermotolerant isolate that yielded those of higher quality. Remarkable enhanced outcomes were observed across varying pulp attributes: for example, enzyme-treated pulp treated to chemical bleaching sequence generated improved brightness of 11.25%. This resulted in 11.25% of less chlorine or chemical consumption required for obtaining pulp with optical attributes identical to those generated via typical chemical bleaching processes. Ultimately, the reduced consumption of chlorine would minimise the organochlorine compounds found in an effluent, resulting in a lowered environmental effect of paper-making processes overall as a consequence. This will undoubtedly facilitate such environmentally-friendly technology incorporation in the paper pulp industry of today.
  14. Aljuboori AH, Idris A, Abdullah N, Mohamad R
    Bioresour Technol, 2013 Jan;127:489-93.
    PMID: 23159465 DOI: 10.1016/j.biortech.2012.09.016
    The production and characterization of a bioflocculant, IH-7, by Aspergillus flavus was investigated. About 0.4 g of purified bioflocculant with an average molecular weight of 2.574 × 10(4)Da could be obtained from 1L of fermentation medium. The bioflocculant mainly consisted of protein (28.5%) and sugar (69.7%), including 40% of neutral sugar, 2.48% of uronic acid and 1.8% amino sugar. The neutral sugar components are sucrose, lactose, glucose, xylose, galactose, mannose and fructose at a molar ratio of 2.4:4.4:4.1:5.8:9.9:0.8:3.1. Fourier-transform infrared spectroscopy analysis revealed that purified IH-7 contained hydroxyl, amide, carboxyl and methoxyl groups. The elemental analysis of purified IH-7 showed that the weight fractions of the elements C, H, O, N and S were 29.9%, 4.8%, 34.7%, 3.3%, and 2.0%, respectively. IH-7 had good flocculating rate in kaolin suspension without cation addition and stable over wide range of pH and temperature.
  15. Moniri M, Boroumand Moghaddam A, Azizi S, Abdul Rahim R, Bin Ariff A, Zuhainis Saad W, et al.
    Nanomaterials (Basel), 2017 Sep 04;7(9).
    PMID: 32962322 DOI: 10.3390/nano7090257
    Bacterial cellulose (BC) is a highly pure and crystalline material generated by aerobic bacteria, which has received significant interest due to its unique physiochemical characteristics in comparison with plant cellulose. BC, alone or in combination with different components (e.g., biopolymers and nanoparticles), can be used for a wide range of applications, such as medical products, electrical instruments, and food ingredients. In recent years, biomedical devices have gained important attention due to the increase in medical engineering products for wound care, regeneration of organs, diagnosis of diseases, and drug transportation. Bacterial cellulose has potential applications across several medical sectors and permits the development of innovative materials. This paper reviews the progress of related research, including overall information about bacterial cellulose, production by microorganisms, mechanisms as well as BC cultivation and its nanocomposites. The latest use of BC in the biomedical field is thoroughly discussed with its applications in both a pure and composite form. This paper concludes the further investigations of BC in the future that are required to make it marketable in vital biomaterials.
  16. Lim YH, Foo HL, Loh TC, Mohamad R, Abdul Rahim R, Idrus Z
    Microb Cell Fact, 2019 Jul 22;18(1):125.
    PMID: 31331395 DOI: 10.1186/s12934-019-1173-2
    BACKGROUND: Threonine is an essential amino acid that is extensively used in livestock industry as feed supplement due to its pronounced effect in improving the growth performance of animals. Application of genetically engineered bacteria for amino acid production has its share of controversies after eosinophils myalgia syndrome outbreak in 1980s. This has urged for continuous search for a food grade producer as a safer alternative for industrial amino acid production. Lactic acid bacteria (LAB) appear as an exceptional candidate owing to their non-pathogenic nature and reputation of Generally Recognized as Safe (GRAS) status. Recently, we have identified a LAB, Pediococcus pentosaceus TL-3, isolated from Malaysian food as a potential threonine producer. Thus, the objective of this study was to enhance the threonine production by P. pentosaceus TL-3 via optimized medium developed by using Plackett-Burman design (PBD) and central composite design (CCD).

    RESULTS: Molasses, meat extract, (NH4)2SO4, and MnSO4 were identified as the main medium components for threonine production by P. pentosaceus TL-3. The optimum concentration of molasses, meat extract, (NH4)2SO4 and MnSO4 were found to be 30.79 g/L, 25.30 g/L, 8.59 g/L, and 0.098 g/L respectively based on model obtained in CCD with a predicted net threonine production of 123.07 mg/L. The net threonine production by P. pentosaceus TL-3 in the optimized medium was enhanced approximately 2 folds compared to the control.

    CONCLUSIONS: This study has revealed the potential of P. pentosaceus TL-3 as a safer alternative to produce threonine. Additionally, the current study has identified the key medium components affecting the production of threonine by P. pentosaceus TL-3, followed by optimization of their concentrations by means of statistical approach. The findings of this study could act as a guideline for the future exploration of amino acid production by LAB.

  17. Ashari SE, Mohamad R, Ariff A, Basri M, Salleh AB
    J Oleo Sci, 2009;58(10):503-10.
    PMID: 19745577
    Kojic acid monooleate is a fatty acid derivative of kojic acid which can be widely used as a skin whitening agent in a cosmetic applications. In avoiding any possible harmful effects from chemically synthesized product, the enzymatic synthesis appears to be the best way to satisfy the consumer demand nowadays. The ability of immobilized lipase from Rhizomucor meihei (lipozyme RMIM) to catalyze the direct esterification of kojic acid and oleic acid was investigated. Response Surface Methodology (RSM) and 5-level-4-factor central composite rotatable were employed to evaluate the effects of synthesis parameters such as enzyme amount (0.1-0.4 g), temperature (30-60 degrees C), substrate molar ratio (1-4 mmol, kojic acid:oleic acid) and reaction time (24-48 h) on percentage molar conversion to kojic acid monooleate. Analysis of the product using TLC, GC and FTIR showed the presence of kojic acid monooleate. The optimal conditions for the enzymatic reaction were obtained after analysis with backward elimination using 0.17 g of enzyme and 4 mmol of substrate at 52.50 degrees C for 42 h. Under these conditions the esterification percentage was 37.21%. The results demonstrated that response surface methodology can be applied effectively to optimize the lipase-catalysed synthesis of kojic acid monooleate. The optimum conditions can be used to scale up the process.
  18. Jumbri K, Al-Haniff Rozy MF, Ashari SE, Mohamad R, Basri M, Fard Masoumi HR
    PLoS One, 2015;10(12):e0144664.
    PMID: 26657030 DOI: 10.1371/journal.pone.0144664
    Kojic acid is widely used to inhibit the browning effect of tyrosinase in cosmetic and food industries. In this work, synthesis of kojic monooleate ester (KMO) was carried out using lipase-catalysed esterification of kojic acid and oleic acid in a solvent-free system. Response Surface Methodology (RSM) based on central composite rotatable design (CCRD) was used to optimise the main important reaction variables, such as enzyme amount, reaction temperature, substrate molar ratio, and reaction time along with immobilised lipase from Candida Antarctica (Novozym 435) as a biocatalyst. The RSM data indicated that the reaction temperature was less significant in comparison to other factors for the production of a KMO ester. By using this statistical analysis, a quadratic model was developed in order to correlate the preparation variable to the response (reaction yield). The optimum conditions for the enzymatic synthesis of KMO were as follows: an enzyme amount of 2.0 wt%, reaction temperature of 83.69°C, substrate molar ratio of 1:2.37 (mmole kojic acid:oleic acid) and a reaction time of 300.0 min. Under these conditions, the actual yield percentage obtained was 42.09%, which is comparably well with the maximum predicted value of 44.46%. Under the optimal conditions, Novozym 435 could be reused for 5 cycles for KMO production percentage yield of at least 40%. The results demonstrated that statistical analysis using RSM can be used efficiently to optimise the production of a KMO ester. Moreover, the optimum conditions obtained can be applied to scale-up the process and minimise the cost.
  19. Mohi-Aldeen SM, Mohamad R, Deris S
    PLoS One, 2020;15(11):e0242812.
    PMID: 33253281 DOI: 10.1371/journal.pone.0242812
    Path testing is the basic approach of white box testing and the main approach to solve it by discovering the particular input data of the searching space to encompass the paths in the software under test. Due to the increasing software complexity, exhaustive testing is impossible and computationally not feasible. The ultimate challenge is to generate suitable test data that maximize the coverage; many approaches have been developed by researchers to accomplish path coverage. The paper suggested a hybrid method (NSA-GA) based on Negative Selection Algorithm (NSA) and Genetic Algorithm (GA) to generate an optimal test data avoiding replication to cover all possible paths. The proposed method modifies the generation of detectors in the generation phase of NSA using GA, as well as, develops a fitness function based on the paths' prioritization. Different benchmark programs with different data types have been used. The results show that the hybrid method improved the coverage percentage of the programs' paths, even for complicated paths and its ability to minimize the generated number of test data and enhance the efficiency even with the increased input range of different data types used. This method improves the effectiveness and efficiency of test data generation and maximizes search space area, increasing percentage of path coverage while preventing redundant data.
  20. Boroumand Moghaddam A, Namvar F, Moniri M, Md Tahir P, Azizi S, Mohamad R
    Molecules, 2015;20(9):16540-65.
    PMID: 26378513 DOI: 10.3390/molecules200916540
    In the field of nanotechnology, the use of various biological units instead of toxic chemicals for the reduction and stabilization of nanoparticles, has received extensive attention. Among the many possible bio resources, biologically active products from fungi and yeast represent excellent scaffolds for this purpose. Since fungi and yeast are very effective secretors of extracellular enzymes and number of species grow fast and therefore culturing and keeping them in the laboratory are very simple. They are able to produce metal nanoparticles and nanostructure via reducing enzyme intracellularly or extracellularly. The focus of this review is the application of fungi and yeast in the green synthesis of inorganic nanoparticles. Meanwhile the domain of biosynthesized nanoparticles is somewhat novel; the innovative uses in nano medicine in different areas including the delivery of drug, cancer therapy, antibacterial, biosensors, and MRI and medical imaging are reviewed. The proposed signaling pathways of nanoparticles induced apoptosis in cancerous cells and anti-angiogenesis effects also are reviewed. In this article, we provide a short summary of the present study universally on the utilization of eukaryotes like yeast and fungi in the biosynthesis of nanoparticles (NPs) and their uses.
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links