METHODS: The norm-referenced method of standard setting was applied to the real scores of 40 final-year dental students on a multiple-choice question (MCQ), a short answer question (SAQ), and an objective structured clinical examination (OSCE). A panel of 10 judges set the standard using the modified-Angoff method for the same paper in one sitting. One judge set the passing score of 10 OSCE questions after 2 weeks. A comparison of the grades and pass/fail rates derived from the absolute standard, norm-referenced, and modified-Angoff methods was made. The intra-rater and inter-rater reliabilities of the modified-Angoff method were assessed.
RESULTS: The passing rate for the absolute standard was 100% (40/40), for the norm-referenced method it was 62.5% (25/40), and for the modified-Angoff method it was 80% (32/40). The modified-Angoff method had good inter-rater reliability of 0.876 and excellent test-retest reliability of 0.941.
CONCLUSION: There were significant differences in the outcomes of these three standard-setting methods, as shown by the difference in the proportion of candidates who passed and failed the assessment. The modified-Angoff method was found to have good reliability for use with a professional qualifying dental examination.
METHODOLOGY: A prospective hospital-wide point prevalence survey was carried out by a multidisciplinary team in April 2019 at the University Malaya Medical Centre (UMMC) and the Hospital Canselor Tuanku Muhriz (HCTM), Kuala Lumpur, Malaysia. Data was collected from the patient's electronic medical records and recorded using the Hospital National Antimicrobial Prescribing Survey toolkit developed by the National Centre for Antimicrobial Stewardship, Australia.
RESULTS: The appropriateness of prescriptions was 60.1% (UMMC) and 67% (HCTM), with no significant difference between the two hospitals. Compliance with guidelines was 60.0% (UMMC) and 61.5% (HCTM). Amoxicillin-clavulanic acid was the most commonly prescribed antimicrobial (UMMC = 16.9%; HCTM = 11.9%).
CONCLUSIONS: The appropriateness of antimicrobial prescribing in medical wards, compliance with guidelines, and prescribing patterns were similar between the two hospitals in Malaysia. The survey identified several areas of prescribing that would need targeted AMS interventions.
MATERIALS AND METHODS: Sixmaster dies were duplicated from the prepared maxillary first premolar tooth using nonprecious metal alloy (Wiron 99). Ten copings of 0.6 mm thickness were fabricated from each type of ceramic, for a total of thirty copings. Two master dies were used for each group, and each of them was used to lute five copings. All groups were cemented with resin luting cement Panavia F according to manufacturer's instructions and received a static load of 5 kg during cementation. After 24 hours of distilled water storage at 37 degrees C, the copings were vertically compressed using a universal testing machine at a crosshead speed of 1 mm/min.
RESULTS: The results of the present study showed the following mean loads at fracture: Turkom-Cera (2184 +/- 164 N), In-Ceram (2042 +/- 200 N), and Procera AllCeram (1954 +/- 211 N). ANOVA and Scheffe's post hoc test showed that the mean load at fracture of Turkom-Cera was significantly different from Procera AllCeram (p < 0.05). Scheffe's post hoc test showed no significant difference between the mean load at fracture of Turkom-Cera and In-Ceram or between the mean load at fracture of In-Ceram and Procera AllCeram.
CONCLUSION: Because Turkom-Cera demonstrated equal to or higher loads at fracture than currently accepted all-ceramic materials, it would seem to be acceptable for fabrication of anterior and posterior ceramic crowns.
AIM: To evaluate the shear bond strength of Zinc phosphate cement Elite, glass ionomer cement Fuji I, resin-modified glass ionomer cement Fuji Plus and resin luting cement Panavia-F to Turkom-Cera all-ceramic material.
MATERIALS AND METHODS: Turkom-Cera was used to form discs 10mm in diameter and 3 mm in thickness (n = 40). The ceramic discs were wet ground, air - particle abraded with 50 - μm aluminium oxide particles and randomly divided into four groups (n = 10). The luting cement was bonded to Turkom-Cera discs as per manufacturer instructions. The shear bond strengths were determined using the universal testing machine at a crosshead speed of 0.5 mm/min. The data were analysed using the tests One Way ANOVA, the nonparametric Kruskal - Wallis test and Mann - Whitney Post hoc test.
RESULTS: The shear bond strength of the Elite, Fuji I, Fuji Plus and Panavia F groups were: 0.92 ± 0.42, 2.04 ± 0.78, 4.37 ± 1.18, and 16.42 ± 3.38 MPa, respectively. There was the statistically significant difference between the four luting cement tested (p < 0.05).
CONCLUSION: the phosphate-containing resin cement Panavia-F exhibited shear bond strength value significantly higher than all materials tested.
MATERIALS AND METHODS: Forty Turkom-Cera ceramic disks (10 mm × 3 mm) were prepared and randomly divided into four groups. The disks were wet ground to 1000-grit and subjected to four surface treatments: (1) No treatment (Control), (2) sandblasting, (3) silane application, and (4) sandblasting + silane. The four groups of 10 specimens each were bonded with Panavia-F resin cement according to manufacturer's recommendations. The SBS was determined using the universal testing machine (Instron) at 0.5 mm/min crosshead speed. Failure modes were recorded and a qualitative micromorphologic examination of different surface treatments was performed. The data were analyzed using the one-way analysis of variance (ANOVA) and Tukey honestly significant difference (HSD) tests.
RESULTS: The SBS of the control, sandblasting, silane, and sandblasting + silane groups were: 10.8 ± 1.5, 16.4 ± 3.4, 16.2 ± 2.5, and 19.1 ± 2.4 MPa respectively. According to the Tukey HSD test, only the mean SBS of the control group was significantly different from the other three groups. There was no significant difference between sandblasting, silane, and sandblasting + silane groups.
CONCLUSION: In this study, the three surface treatments used improved the bond strength of resin cement to Turkom-Cera disks.
CLINICAL SIGNIFICANCE: The surface treatments used in this study appeared to be suitable methods for the cementation of glass infiltrated all-ceramic restorations.