The tendency for experimental and industrial variables to include a certain proportion of outliers has become a rule rather than an exception. These clusters of outliers, if left undetected, have the capability to distort the mean and the covariance matrix of the Hotelling's T2 multivariate control charts constructed to monitor individual quality characteristics. The effect of this distortion is that the control chart constructed from it becomes unreliable as it exhibits masking and swamping, a phenomenon in which an out-of-control process is erroneously declared as an in-control process or an in-control process is erroneously declared as out-of-control process. To handle these problems, this article proposes a control chart that is based on cluster-regression adjustment for retrospective monitoring of individual quality characteristics in a multivariate setting. The performance of the proposed method is investigated through Monte Carlo simulation experiments and historical datasets. Results obtained indicate that the proposed method is an improvement over the state-of-art methods in terms of outlier detection as well as keeping masking and swamping rate under control.
The ongoing global pandemic of COVID-19 has devastatingly influenced the environment, society, and economy around the world. Numerous medical resources are used to inhibit the infectious transmission of the virus, resulting in massive medical waste. This study proposes a sustainable and environment-friendly method to convert hazardous medical waste into valuable fuel products through pyrolysis. Medical protective clothing (MPC), a typical medical waste from COVID-19, was utilized for co-pyrolysis with oil palm wastes (OPWs). The utilization of MPC improved the bio-oil properties in OPWs pyrolysis. The addition of catalysts further ameliorated the bio-oil quality. HZSM-5 was more effective in producing hydrocarbons in bio-oil, and the relevant reaction pathway was proposed. Meanwhile, a project was simulated to co-produce bio-oil and electricity from the co-pyrolysis of OPWs and MPC from application perspectives. The techno-economic analysis indicated that the project was economically feasible, and the payback period was 6.30-8.75 years. Moreover, it was also environmentally benign as its global warming potential varied from -211.13 to -90.76 kg CO2-eq/t. Therefore, converting MPC and OPWs into biofuel and electricity through co-pyrolysis is a green, economic, and sustainable method that can decrease waste, produce valuable fuel products, and achieve remarkable economic and environmental benefits.
The phytochemistry and bioactivity of wetland macrophytes are underexplored. Plants are known as the natural sources of phytochemical beneficial to health.
The purpose of this investigation was to determine the antioxidant potentials and anti-glucosidase activities of six tropical medicinal plants. The levels of phenolic constituents in these medicinal plants were also quantified and compared. Antioxidation potentials were determined colorimetrically for scavenging activities against DPPH and NO radicals. Metal chelating assay was based on the measurement of iron-ferrozine absorbance at 562 nm. Anti-diabetic potentials were measured by using α-glucosidase as target enzyme. Medicinal plants' total phenolic, total flavonoid and hydroxycinnamic acid contents were determined using spectrophotometric methods, by comparison to standard plots prepared using gallic acid, quercetin and caffeic acid standards, respectively. Radical scavenging and metal chelating activities were detected in all medicinal plants, in concentration-dependent manners. Among the six plants tested, C. nutans, C. formosana and H. diffusa were found to possess α-glucosidase inhibitory activities. Spectrophotometric analysis indicated that the total phenolic, total flavonoid and hydroxycinnamic acid contents ranged from 12.13-21.39 mg GAE per g of dry sample, 1.83-9.86 mg QE per g of dry sample, and 0.91-2.74 mg CAE per g of dry sample, respectively. Our results suggested that C. nutans and C. formosana could potentially be used for the isolation of potent antioxidants and anti-diabetic compounds. To the best of our knowledge, this study represents the first time that C. nutans (Acanthaceae family) was reported in literature with glucosidase inhibition activity.
A study of 207 benign ovarian tumors seen at the University Hospital, Kuala Lumpur between 1968 and 1975 was made to evaluate the clinical features that might be useful in the preoperative differentiation of mucinous cystadenoma, serous cystadenoma, and cystic teratoma of the ovary. This study indicated that the pertinent information included the mean age of the patient, the marital and menstrual status, and the estimated tumor size. The racial background was an additional factor in serous cystadenoma. Features like parity, the location of the tumor, and ABO blood group pattern were of no value in the preoperative differentiation.
Benign cystic teratoma of the ovary has a varied incidence, varying from 30 to 50 per cent of all benign ovarian tumours. This tumour tends to occur in the reproductive age group (20 to 40 years), and the majority of patients are married with children. About 40 per cent of patients are symptomless. Of those with symptoms, abdominal pain and mass are the commonest. Torsion is the most frequent complication encountered, and the presence of acute pain should make one suspect this complication. The tumour is bilateral in 10 to 20 per cent of patients. This high bilateral occurrence places a responsibility on the gynaecologist to inspect the opposite ovary in all cases of unilateral dermoid cyst of the ovary at the time of laparotomy. Germ·layer derivatives are predominantly ectodermal in origin, although both mesodermal and entodermal derivatives occur frequently.
Algal biomass is known as a promising sustainable feedstock for the production of biofuels and other valuable products. However, since last decade, massive amount of interests have turned to converting algal biomass into biochar. Due to their high nutrient content and ion-exchange capacity, algal biochars can be used as soil amendment for agriculture purposes or adsorbents in wastewater treatment for the removal of organic or inorganic pollutants. This review describes the conventional (e.g., slow and microwave-assisted pyrolysis) and newly developed (e.g., hydrothermal carbonization and torrefaction) methods used for the synthesis of algae-based biochars. The characterization of algal biochar and a comparison between algal biochar with biochar produced from other feedstocks are also presented. This review aims to provide updated information on the development of algal biochar in terms of the production methods and the characterization of its physical and chemical properties to justify and to expand their potential applications.
Microalgae are considered promising feedstock for the production of biofuels and other bioactive compounds, yet there are still challenges on commercial applications of microalgae-based products. This review focuses on the economic analysis, environmental impact, and industrial potential of biofuels production from microalgae. The cost of biofuels production remains higher compared to conventional fuel sources. However, integration of biorefinery pathways with biofuels production for the recovery of value-added products (such as antioxidants, natural dyes, cosmetics, nutritional supplements, polyunsaturated fatty acids, and so forth) could substantially reduce the production costs. It also paves the way for sustainable energy resources by significantly reducing the emissions of CO2 , NOx , SOx , and heavy metals. Large-scale biofuels production has yet to be successfully commercialized with many roadblocks ahead and heavy competition with conventional fuel feedstock as well as technological aspects. One of the prominent challenges is to develop a cost-effective method to achieve high-density microalgal cultivation on an industrial scale. The biofuels industry should be boosted by Government's support in the form of subsidies and incentives, for addressing the pressing climate change issues, achieving sustainability, and energy security.
A retrospective analysis of 102 cases of hydatidiform moles seen in the Maternity Hospital, Kuala Lumpur, Malaysia, is presented. The incidence was 1 : 669. The tumour was more common In the Malays and in the lower social class patients. No specific age group or parity group was exempted. Vaginal bleeding and amenorrhoea were prominent features. Hyperemesis and abdominal cramps occurred less commonly. The uterine size was larger than dates in 62.7% of patients. Pre-eclampsia complicated 23.5% of the moles and Its severity was inversely related to the uterine size. Spontaneous abortion occurred In 57.8% of patients at a mean gestational period of 19 weeks.
Study site: Maternity Hospital Kuala
Lumpur, Malaysia
The COVID-19 pandemic has exerted great shocks and challenges to the environment, society and economy. Simultaneously, an intractable issue appeared: a considerable number of hazardous medical wastes have been generated from the hospitals, clinics, and other health care facilities, constituting a serious threat to public health and environmental sustainability without proper management. Traditional disposal methods like incineration, landfill and autoclaving are unable to reduce environmental burden due to the issues such as toxic gas release, large land occupation, and unsustainability. While the application of clean and safe pyrolysis technology on the medical wastes treatment to produce high-grade bioproducts has the potential to alleviate the situation. Besides, medical wastes are excellent and ideal raw materials, which possess high hydrogen, carbon content and heating value. Consequently, pyrolysis of medical wastes can deal with wastes and generate valuable products like bio-oil and biochar. Consequently, this paper presents a critical and comprehensive review of the pyrolysis of medical wastes. It demonstrates the feasibility of pyrolysis, which mainly includes pyrolysis characteristics, product properties, related problems, the prospects and future challenges of pyrolysis of medical wastes.
This paper reports the result of an investigation on the potential energy saving of the lighting systems at selected buildings of the Universiti Tenaga Nasional. The scope of this project includes evaluation of the lighting system in the Library, Admin Building, College of Engineering, College of Information Technology, Apartments, and COE Food court of the university. The main objectives of this project are to design the proper retrofit scenario and to calculate the potential electricity saving, the payback period, and the potential environmental benefits. In this survey the policy for retrofitting the old lighting system with the new energy saving LEDs starts with 10% for the first year and continues constantly for 10 years until all the lighting systems have been replaced. The result of the life cycle analysis reveals that after four years, the selected buildings will bring profit for the investment.
In this work, γ-Fe2O3 and TiO2 NTs/γ-Fe2O3 composites with good magnetism and sonocatalytic activity were prepared by a facile polyol method and utilize the principle of isoelectric point method, respectively. The structural and magnetic features of the prepared calcined γ-Fe2O3 and composite catalysts were investigated by transmission electron microscopy (TEM), powder X-ray diffraction (XRD), surface analysis, UV-Vis diffuse reflectance spectra (UV-Vis DRS), vibrating sample magnetometry (VSM) and zeta potential analysis. The effects of calcination temperature on γ-Fe2O3 phase variation, physical properties and sonocatalytic properties were investigated. The porosity, specific surface area, band gap energy and sonocatalytic activity of γ-Fe2O3 were gradually decreased with calcination temperature increased. TiO2 NTs/γ-Fe2O3 with appropriate composition and specific structural features possess synergetic effects such as efficient separation of charge carriers and hydroxyl radicals produced by heterogeneous fenton and fenton-like reactions. This enhanced the sonocatalytic activity for the degradation of Orange G under ultrasonic irradiation. The sonocatalytic reactions obeyed pseudo first-order kinetics. All these information provide insight into the design and development of high-efficiency catalyst for wastewater treatment.
This study investigated the engine performance and emission characteristics of biodiesel blends with combined Graphene oxide nanoplatelets (GNPs) and 10% v/v dimethyl carbonate (DMC) as fuel additives as well as analysed the tribological characteristics of those blends. 10% by volume DMC was mixed with 30% palm oil biodiesel blends with diesel. Three different concentrations (40, 80 and 120 ppm) of GNPs were added to these blends via the ultrasonication process to prepare the nanofuels. Sodium dodecyl sulphate (SDS) surfactant was added to improve the stability of these blends. GNPs were characterised using Scanning Electron Microscope (SEM) and Fourier Transform Infrared (FTIR), while the viscosity of nanofuels was investigated by rheometer. UV-spectrometry was used to determine the stability of these nanoplatelets. A ratio of 1:4 GNP: SDS was found to produce maximum stability in biodiesel. Performance and emissions characteristics of these nanofuels have been investigated in a four-stroke compression ignition engine. The maximum reduction in BSFC of 5.05% and the maximum BTE of 22.80% was for B30GNP40DMC10 compared to all other tested blends. A reduction in HC (25%) and CO (4.41%) were observed for B30DMC10, while a reduction in NOx of 3.65% was observed for B30GNP40DMC10. The diesel-biodiesel fuel blends with the addition of GNP exhibited a promising reduction in the average coefficient of friction 15.05%, 8.68% and 3.61% for 120, 80 and 40 ppm concentrations compared to B30. Thus, combined GNP and DMC showed excellent potential for utilisation in diesel engine operation.
In our screening program for new photosensitizers from the Malaysian biodiversity, we found five pheophorbide-related compounds from the leaves and stems of Aglaonema simplex. Detailed spectroscopic analyses showed that compounds 1-3 and 5 are pheophorbide and hydroxy pheophorbide derivatives of chlorophyll a and b. Compound 4, identified as 15(1)-hydroxypurpurin-7-lactone ethyl methyl diester, was isolated for the first time from the Araceae family. An MTT-based short-term survival assay showed that all five compounds exhibit moderate-to-strong photocytotoxic activities towards human leukemia (HL60) and two oral squamous carcinoma cell lines (HSC-2 and HSC-3). Compounds 4 and 5 showed the strongest photocytotoxicities, with IC(50) values of 0.30-0.41 muM (Table 2). Compounds 1-3 with Et chains at C(17(3)) were less photocytotoxic than the parent pheophorbide a (5).
Zeolite socony mobil-5 (ZSM-5) is a common catalyst used for biomass pyrolysis. Nevertheless, the quantitative information on the catalytic behavior of ZSM-5 on biomass pyrolysis is absent so far. This study focuses on the catalytic pyrolysis phenomena and mechanisms of biomass wastes using ZSM-5 via thermogravimetric analyzer and pyrolysis-gas chromatography/mass spectrometry, with particular emphasis on catalytic level identification and aromatic hydrocarbons (AHs) formation. Two biomass wastes of sawdust and sorghum distillery residue (SDR) are investigated, while four biomass-to-catalyst ratios are considered. The analysis suggests that biomass waste pyrolysis processes can be divided into three zones, proceeding from a heat-transfer dominant zone (zone 1) to catalysis dominant zones (zones 2 and 3). The indicators of the intensity of difference (IOD), catalytic effective area, catalytic index (CI), and aromatic enhancement index are conducted to measure the catalytic effect of ZSM-5 on biomass waste pyrolysis and AHs formation. The maximum IOD occurs in zone 2, showing the highest intensity of the catalytic effect. The CI values of the two biomass wastes increase with increasing the biomass-to-catalyst ratio. However, there exists a threshold for sawdust pyrolysis, indicating a limit for the catalytic effect on sawdust. The higher the catalyst addition, the higher the AHs proportion in the vapor stream. When the biomass-to-catalyst ratio is 1/10, AHs formation is intensified significantly, especially for sawdust. Overall, the indexes conducted in the present study can provide useful measures to identify the catalytic pyrolysis dynamics and levels.
Genetic engineering applications in the field of biofuel are rapidly expanding due to their potential to boost biomass productivity while lowering its cost and enhancing its quality. Recently, fourth-generation biofuel (FGB), which is biofuel obtained from genetically modified (GM) algae biomass, has gained considerable attention from academic and industrial communities. However, replacing fossil resources with FGB is still beset with many challenges. Most notably, technical aspects of genetic modification operations need to be more fully articulated and elaborated. However, relatively little attention has been paid to GM algal biomass. There is a limited number of reviews on the progress and challenges faced in the algal genetics of FGB. Therefore, the present review aims to fill this gap in the literature by recapitulating the findings of recent studies and achievements on safe and efficient genetic manipulation in the production of FGB. Then, the essential issues and parameters related to genome editing in algal strains are highlighted. Finally, the main challenges to FGB pertaining to the diffusion risk and regulatory frameworks are addressed. This review concluded that the technical and biosafety aspects of FGB, as well as the complexity and diversity of the related regulations, legitimacy concerns, and health and environmental risks, are among the most important challenges that require a strong commitment at the national/international levels to reach a global consensus.