Displaying all 16 publications

Abstract:
Sort:
  1. Ghasemzadeh A, Jaafar HZ, Ashkani S, Rahmat A, Juraimi AS, Puteh A, et al.
    BMC Complement Altern Med, 2016 Mar 22;16:104.
    PMID: 27004511 DOI: 10.1186/s12906-016-1072-6
    Zingiber zerumbet (L.) is a traditional Malaysian folk remedy that contains several interesting bioactive compounds of pharmaceutical quality.
  2. Phing Lau WC, Latif MA, Y Rafii M, Ismail MR, Puteh A
    Crit Rev Biotechnol, 2016;36(1):87-98.
    PMID: 24937109 DOI: 10.3109/07388551.2014.923987
    The eating and cooking qualities of rice are heavily emphasized in breeding programs because they determine market values and they are the appealing attributes sought by consumers. Conventional breeding has developed traditional varieties with improved eating and cooking qualities. Recently, intensive genetic studies have pinpointed the genes that control eating and cooking quality traits. Advances in genetic studies have developed molecular techniques, thereby allowing marker-assisted breeding (MAB) for improved eating and cooking qualities in rice. MAB has gained the attention of rice breeders for the advantages it can offer that conventional breeding cannot. There have been successful cases of using MAB to improve the eating and cooking qualities in rice over the years. Nevertheless, MAB should be applied cautiously given the intensive effort needed for genotyping. Perspectives from conventional breeding to marker-assisted breeding will be discussed in this review for the advancement of the eating and cooking qualities of fragrance, amylose content (AC), gel consistency (GC) and gelatinization temperature (GT) in rice. These four parameters are associated with eating and cooking qualities in rice. The genetic basis of these four parameters is also included in this review. MAB is another approach to rice variety improvement and development in addition to being an alternative to genetic engineering. The MAB approach shortens the varietal development time, and is therefore able to deliver improved rice varieties to farmers within a shorter period of time.
  3. Ghasemzadeh A, Talei D, Jaafar HZ, Juraimi AS, Mohamed MT, Puteh A, et al.
    BMC Complement Altern Med, 2016;16(1):152.
    PMID: 27234523 DOI: 10.1186/s12906-016-1113-1
    Sweet potato (Ipomoea batatas L.) is one of the most important consumed crops in many parts of the world because of its economic importance and content of health-promoting phytochemicals.
  4. Lau WC, Rafii MY, Ismail MR, Puteh A, Latif MA, Ramli A
    Front Plant Sci, 2015;6:832.
    PMID: 26528304 DOI: 10.3389/fpls.2015.00832
    After yield, quality is one of the most important aspects of rice breeding. Preference for rice quality varies among cultures and regions; therefore, rice breeders have to tailor the quality according to the preferences of local consumers. Rice quality assessment requires routine chemical analysis procedures. The advancement of molecular marker technology has revolutionized the strategy in breeding programs. The availability of rice genome sequences and the use of forward and reverse genetics approaches facilitate gene discovery and the deciphering of gene functions. A well-characterized gene is the basis for the development of functional markers, which play an important role in plant genotyping and, in particular, marker-assisted breeding. In addition, functional markers offer advantages that counteract the limitations of random DNA markers. Some functional markers have been applied in marker-assisted breeding programs and have successfully improved rice quality to meet local consumers' preferences. Although functional markers offer a plethora of advantages over random genetic markers, the development and application of functional markers should be conducted with care. The decreasing cost of sequencing will enable more functional markers for rice quality improvement to be developed, and application of these markers in rice quality breeding programs is highly anticipated.
  5. Mahmodi F, Kadir JB, Puteh A, Pourdad SS, Nasehi A, Soleimani N
    Plant Pathol J, 2014 Mar;30(1):10-24.
    PMID: 25288981 DOI: 10.5423/PPJ.OA.05.2013.0054
    Genetic diversity and differentiation of 50 Colletotrichum spp. isolates from legume crops studied through multigene loci, RAPD and ISSR analysis. DNA sequence comparisons by six genes (ITS, ACT, Tub2, CHS-1, GAPDH, and HIS3) verified species identity of C. truncatum, C. dematium and C. gloeosporiodes and identity C. capsici as a synonym of C. truncatum. Based on the matrix distance analysis of multigene sequences, the Colletotrichum species showed diverse degrees of intera and interspecific divergence (0.0 to 1.4%) and (15.5-19.9), respectively. A multilocus molecular phylogenetic analysis clustered Colletotrichum spp. isolates into 3 well-defined clades, representing three distinct species; C. truncatum, C. dematium and C. gloeosporioides. The ISSR and RAPD and cluster analysis exhibited a high degree of variability among different isolates and permitted the grouping of isolates of Colletotrichum spp. into three distinct clusters. Distinct populations of Colletotrichum spp. isolates were genetically in accordance with host specificity and inconsistent with geographical origins. The large population of C. truncatum showed greater amounts of genetic diversity than smaller populations of C. dematium and C. gloeosporioides species. Results of ISSR and RAPD markers were congruent, but the effective maker ratio and the number of private alleles were greater in ISSR markers.
  6. Nakasha JJ, Sinniah UR, Puteh A, Hassan SA
    ScientificWorldJournal, 2014;2014:168950.
    PMID: 24688363 DOI: 10.1155/2014/168950
    Tubers of safed musli (Chlorophytum borivilianum) were immersed in three different concentrations of gibberellic acid (GA3) or humic acid (HA) prior to planting. The highest concentration of GA3 (20 mg L(-1)) and all concentrations of HA (5, 10, and 15%) appeared to hasten tuber sprouting and promote uniform sprouting pattern. The use of 20 mg L(-1) GA3 or 15% HA successfully improved sprouting and mean sprouting time. Safed musli growth and development was improved through the increase in the number of leaves, total leaf area, leaf area index, and total fibrous root length. This directly influenced the number of new tubers formed. The use of 20 mg L(-1) GA3 or 15% HA gave similar response with nonsignificant difference among them. However, due to the cost of production, the result from this study suggests that 15% HA should be used to obtain improved sprouting percentage, homogeneous stand establishment, efficient plant growth and development, and increased yield of safed musli.
  7. Zain NA, Ismail MR, Mahmood M, Puteh A, Ibrahim MH
    Molecules, 2014;19(2):1795-819.
    PMID: 24504074 DOI: 10.3390/molecules19021795
    The use of periodical water stress and potassium fertilization may enhance rice tolerance to drought stress and improve the crop's instantaneous water use efficiency without much yield reduction. This study was conducted to assess the effects of different periodical water stress combined with potassium fertilization regimes on growth, yield, leaf gas exchanges and biochemical changes in rice grown in pots and compare them with standard local rice grower practices. Five treatments including (1) standard local grower's practice (control, 80CF = 80 kg K2O/ha + control flooding); (2) 120PW15 = 120 kg K2O/ha + periodical water stress for 15 days; (3) 120DS15V = 120 kg K2O/ha + drought stress for 15 days during the vegetative stage; (4) 120DS25V = 120 kg K2O/ha + drought stress for 25 days and (5) 120DS15R = 120 kg K2O/ha + drought stress for 15 days during the reproductive stage, were evaluated in this experiment. Control and 120PW15 treatments were stopped at 100 DAS, and continuously saturated conditions were applied until harvest. It was found that rice under 120PW15 treatment showed tolerance to drought stress evidenced by increased water use efficiency, peroxidase (POX), catalase (CAT) and proline levels, maximum efficiency of photosystem II (fv/fm) and lower minimal fluorescence (fo), compared to other treatments. Path coefficient analysis revealed that most of parameters contribute directly rather than indirectly to rice yield. In this experiment, there were four factors that are directly involved with rice yield: grain soluble sugar, photosynthesis, water use efficiency and total chlorophyll content. The residual factors affecting rice yield are observed to be quite low in the experiment (0.350), confirming that rice yield was mostly influenced by the parameters measured during the study.
  8. Mahmodi F, Kadir JB, Nasehi A, Puteh A, Soleimani N
    Plant Dis, 2013 Nov;97(11):1507.
    PMID: 30708462 DOI: 10.1094/PDIS-03-13-0231-PDN
    At least nine Colletotrichum species, particularly Colletotrichum truncatum, have been recorded on legumes worldwide (1). In June 2010, samples of chickpea leaflets showing leaf spot disease symptoms were collected from experimental farms in Ladang Dua, Selangor state of Malaysia. Tan lesions with darker brown borders were observed on leaflets and were associated with premature leaf drop. Stem lesions initially appeared on the lower parts of stems and later progressed higher in the plant. Lesions often girdled the stem and caused severe dieback. Abundant acervuli developed in the lesions visible as black dots. Foliar lesions were removed, surface sterilized in 1% sodium hypochlorite for 2 min, rinsed twice with distilled water, dried on sterilized tissue paper, plated on PDA plates, and incubated at 25°C (3). Three isolates of the fungus were obtained and identified as C. truncatum on the basis of morphological characteristics (2). The isolates were deposited in the University Putra of Malaysia Culture Collection (UPMCC). Colony characteristics on PDA varied from greyish white to dark in color and exhibited mycelial growth with sparse acervuli. The isolates produced both sclerotia and setae in culture. Conidia (mean ± SD = 22 ± 0.83 × 3.6 ± 0.08 μm, L/W ratio = 6.1) produced in acervuli were falcate, hyaline, and aseptate, with tapering towards the acute and greatly curved apex. The conidial mass color varied from pale buff to saffron. Isolates produced simple to slightly lobed, mainly short clavate appressoria (mean ± SD = 9.60 ± 0.36 × 6.67 ± 0.29 μm, L/W ratio = 1.45). Amplification and sequence analysis of coding and none-coding regions of the ITS-rDNA (GenBank Accession JX971160), actin (JX975392), β-tubulin (KC109495), histone (KC109535), chitin synthase (KC109575), and glyceraldehyde-3-phosphate dehydrogenase (KC109615) obtained from the representative isolate, CTM37, aligned with deposited sequences from GenBank and revealed 99 to 100% sequence identity with C. truncatum strains (AJ301945, KC110827, GQ849442, GU228081, GU228359, and HM131501 from GenBank). Isolate CTM37 was used to test pathogenicity in the greenhouse. Five chickpea seeds of cultivar ILC-1929 were sown per pot in four replications. Ten days after seedling emergence, plants were inoculated with a spore suspension (concentration = 106 conidia ml-1) and check pots were sprayed with distilled water. After inoculation, the plants were covered with plastic bags for 48 h and kept at 28 to 33°C and >90% RH. After incubation, the plastic bags were removed and the plants were placed on greenhouse benches and monitored daily for symptom development (3). One week after inoculation, typical anthracnose symptoms developed on the leaves and stems of inoculated plants including acervuli formation, but not on the checks. A fungus with the same colony and conidial morphology as CTM37 was recovered from the lesions on the inoculated plants. The experiment was repeated twice. The ability to accurately diagnose Colletotrichum species is vital for the implementation of effective disease control and quarantine measures. We believe this is the first report of C. truncatum causing anthracnose on chickpea in Malaysia. References: (1) B. D. Gossen et al. Can. J. Plant Pathol. 31:65, 2009. (2) B. C. Sutton. The Genus Glomerella and its anamorph Colletotrichum. CAB International, Wallingford. UK. 1992. (3) P. P. Than et al. Plant Pathol. 57:562, 2008. ERRATUM: A correction was made to this Disease Note on May 19, 2014. The author N. Soleimani was added.
  9. Mahmodi F, Kadir JB, Wong MY, Nasehi A, Puteh A, Soleimani N
    Plant Dis, 2013 Jun;97(6):841.
    PMID: 30722625 DOI: 10.1094/PDIS-10-12-0944-PDN
    Soybean (Glycine max L.) is one of the most economically important crops in the world, and anthracnose is known to infect soybean in most countries. Colletotrichum truncatum is the common pathogen causing anthracnose of soybean. However, at least five species of Colletotrichum have been reported on soybean worldwide (2). In July 2010, anthracnose symptoms were observed on soybean in the experimental fields of the agriculture station in Ladang Dua, University Putra Malaysia located in Selangor state of Malaysia. Symptoms were initially observed on a few plants randomly within one field, but after 4 weeks, the disease was found in two additional fields scattered across an area of 1 km2. Pinkish-brown lesions were observed on the pods, and the formation of dark lesions on the leaves and stems was sometimes followed by stem girdling, dieback, and distorted growth. At later stages, numerous epidermal acervuli developed in the lesions, and mucilaginous conidial masses appeared during periods of high relative humidity. Conidia produced in acervuli were straight, cylindric, hyaline, and aseptate, with both ends rounded. Conidia measured (mean ± SD) 14.2 ± 0.6 × 3.6 ± 0.7 μm, and the L/W ratio was 3.95 μm. Six isolates of the fungus were obtained and identified as C. gloeosporioides on the basis of morphological characterization (3). The isolates were deposited in the University Putra of Malaysia Culture Collection (UPMCC). PDA cultures were white at first and subsequently became grayish to pink to reddish-brown. Amplification and sequence analysis of coding and none-coding regions of the ITS-rDNA (GenBank JX669450), actin (JX827430), β-tubulin (JX827454), histone (JX827448), chitin synthase (JX827436), and glyceraldehyde-3-phosphate dehydrogenase (JX827442) obtained from the representative isolate, CGM50, aligned with deposited sequences from GenBank and revealed 99 to 100% sequence identity with C. gloeosporioides strains (JX258757, JX009790, GQ849434, HM575301, JQ005413, and JX00948 from GenBank). One representative isolate, CGM50, was used for pathogenicity testing. Four non-infected detached leaves and pods of 24-day-old G. max var. Palmetto were surface-sterilized and inoculated by placing 10 μl of a conidial suspension (106 conidia ml-1) using either the wound/drop or non-wound/drop method (4), with 10 μl distilled water as a negative control. Leaves and pods were incubated at 25°C, 98% RH. The experiment was repeated twice. Five days after inoculation, the development of typical field symptoms, including acervuli formation, occurred on the leaves and pods of inoculated plants, but not on the negative controls. A fungus with the same colony and conidial morphology as CGM50 was recovered from the lesions on the inoculated leaves and pods. Anthracnose caused by C. gloeosporioides on soybean plants has been reported previously in different countries, but not in Malaysia (3). Geographically, the climate of Malaysia is highly conducive to maintain and cause outbreaks of anthracnose all year round; thus, the development of management recommendations will be inevitable for anthracnose control. To our knowledge, this is the first report of C. gloeosporioides causing anthracnose on soybean in Malaysia. References: (1) U. Damm et al. Fungal Diversity 39:45, 2009. (2) S. L. Chen et al. J. Phytopathol. 154:654, 2006. (3) B. C. Sutton. The Genus Glomerella and its Anamorph Colletotrichum. CAB International, Wallingford, UK, 1992. (4) P. P. Than et al. Plant Pathol. 57:562, 2008. ERRATUM: A correction was made to this Disease Note on May 19, 2014. The author N. Soleimani was added.
  10. Mahmodi F, Kadir JB, Wong MY, Nasehi A, Soleimani N, Puteh A
    Plant Dis, 2013 May;97(5):687.
    PMID: 30722185 DOI: 10.1094/PDIS-09-12-0843-PDN
    Bok choy (Brassica chinensis L.) is a temperate vegetable grown in the cool highland areas of Malaysia. In June 2010, vegetable growing areas of the Cameron Highlands, located in Pahang State, Malaysia, were surveyed for the prevalence of anthracnose disease caused by Colletotrichum species. Diseased samples were randomly collected from 12 infested fields. Anthracnose incidence on bok choy varied from 8 to 36% in different nursery fields. Disease symptoms initially appeared as small water-soaked spots scattered on the leaf petioles of young plants. As these spots increased in size, they developed irregular round spots that turned to sunken grayish brown lesions surrounded by brownish borders. When the lesions were numerous, leaves collapsed. Pale buff to salmon conidial mass and acervuli were observed on well-developed lesions. The acervuli diameter varied in size from 198 to 486 μm, averaging 278.5 μm. Morphological and cultural characteristics of the fungus were examined on potato dextrose agar incubated for 7 days at 25 ± 2°C under constant fluorescent light. Vegetative mycelia were hyaline, septate, branched, and 2 to 7 μm in diameter. The color of the fungal colonies was grayish brown. Conidia were hyaline, aseptate, falcate, apices acute, and 21.8 to 28.5 × 2.6 to 3.4 mm. Setae were pale brown to dark brown, 75 to 155 μm long, base cylindrical, and tapering towards the acute tip. Appressoria were solitary or in dense groups, light to dark brown, entire edge to lobed, roundish to clavate, 6.5 to 14 × 5.8 to 8.6 μm, averaging 9.2 × 6.8 μm, and had a L/W ratio of 1.35. Based on the keys outlined by Mordue 1971 (2) and Sutton 1980 (3), the characteristics of this fungus corresponded to Colletotrichum capsici. Sequence analysis of the ITS-rDNA obtained from the Malaysian strain CCM3 (GenBank Accession No. JQ685746) using primers ITS5 and ITS4 (1) when aligned with deposited sequences from GenBank revealed 99 to 100% sequence identity with C. capsici strains (DQ286158, JQ685754, DQ286156, GQ936210, and GQ369594). A representative strain CCM3 was used for pathogenicity testing. Four non-infected detached leaves of 2-week-old B. chinensis were surface-sterilized and inoculated by placing 10 μl of conidial suspension (106 conidia ml-1) using either the wound/drop or non-wound/drop method, and distilled water was used as a control (1). Leaves were incubated at 25°C, 98% RH. The experiment was repeated twice. Five days after inoculation, typical anthracnose symptoms with acervuli formation appeared on the surface of tissues inoculated with the spore suspension, but not on the water controls. A fungus with the characteristics of C. capsici was recovered from the lesions on the inoculated leaves. Anthracnose caused by C. capsici has been reported on different vegetable crops, but not on bok choy (3). To the best of our knowledge, this is the first report of C. capsici causing anthracnose on bok choy in Malaysia. References: (1) R. Ford et al. Aust. Plant Pathol. 33:559, 2004. (2) J. E. M. Mordue. CMI Description of Pathogenic Fungi and Bacteria. Commonwealth Mycol. Inst., Kew, UK. 1971. (3) B. C. Sutton. The Genus Glomerella and its anamorph Colletotrichum. CAB International, Wallingford, UK, 1992. (4) P. P. Than et al. Plant Pathol. 57:562, 2008.
  11. Miah G, Rafii MY, Ismail MR, Puteh AB, Rahim HA, Asfaliza R, et al.
    Mol Biol Rep, 2013 Mar;40(3):2369-88.
    PMID: 23184051 DOI: 10.1007/s11033-012-2318-0
    Blast disease caused by the fungal pathogen Magnaporthe oryzae is the most severe diseases of rice. Using classical plant breeding techniques, breeders have developed a number of blast resistant cultivars adapted to different rice growing regions worldwide. However, the rice industry remains threatened by blast disease due to the instability of blast fungus. Recent advances in rice genomics provide additional tools for plant breeders to improve rice production systems that would be environmentally friendly. This article outlines the application of conventional breeding, tissue culture and DNA-based markers that are used for accelerating the development of blast resistant rice cultivars. The best way for controlling the disease is to incorporate both qualitative and quantitative genes in resistant variety. Through conventional and molecular breeding many blast-resistant varieties have been developed. Conventional breeding for disease resistance is tedious, time consuming and mostly dependent on environment as compare to molecular breeding particularly marker assisted selection, which is easier, highly efficient and precise. For effective management of blast disease, breeding work should be focused on utilizing the broad spectrum of resistance genes and pyramiding genes and quantitative trait loci. Marker assisted selection provides potential solution to some of the problems that conventional breeding cannot resolve. In recent years, blast resistant genes have introgressed into Luhui 17, G46B, Zhenshan 97B, Jin 23B, CO39, IR50, Pusa1602 and Pusa1603 lines through marker assisted selection. Introduction of exotic genes for resistance induced the occurrence of new races of blast fungus, therefore breeding work should be concentrated in local resistance genes. This review focuses on the conventional breeding to the latest molecular progress in blast disease resistance in rice. This update information will be helpful guidance for rice breeders to develop durable blast resistant rice variety through marker assisted selection.
  12. Mahmodi F, Kadir JB, Puteh A, Wong MY, Nasehi A
    Plant Dis, 2013 Feb;97(2):287.
    PMID: 30722331 DOI: 10.1094/PDIS-08-12-0756-PDN
    In July 2011, a severe outbreak of pod and stem blight was observed on lima bean (Phaseolus lunatus L.) plants grown in the Cameron Highlands, located in Pahang State, Malaysia. Disease incidence varied from 33 to 75% in different fields. Pods and stems exhibited withered, light brown to reddish brown necrotic areas. Sub-circular and brown lesions were produced on the leaves. These lesions varied in size, often reaching a diameter of 1 to 2 cm. After tissue death, numerous pycnidia were observed on the surface of the pod or stem. The pycnidia diameter varied from 155 to 495 μm, averaging 265.45 μm, and on the surface of the pod or stem, pycnidia were often arranged concentrically or linearly, respectively. Pycnidiospores were hyaline, 1-celled, usually straight, and rarely, slightly curved. The α-spores varied from 5.5 to 9.0 × 2.5 to 4.0 μm; averaging 7.3 × 3.5 μm. The β-spores found either alone or with pycnidiospores in pycnidia were slender, hyaline, nonseptate, and straight or curved. Size varied from 15.8 to 38.0 × 1.3 to 2.1 μm; averaging 25.86 × 1.8 μm. The colony characteristics were recorded from pure cultures grown on potato dextrose agar plates, and incubated in darkness for 7 days at 25 °C, then exposed to 16/8 h light and dark periods at 25°C for a further 14 to 21 days. Morphological characteristics of the colonies and spores on PDA matched those described for P. phaseolorum var. sojae (2). Colonies were white, compact, with wavy mycelium and stromata with pycnidia that contained abundant β-spores. Sequence analysis of the ribosomal DNA internal transcribed spacer obtained from the Malaysian isolate FM1 (GenBank Accession No. JQ514150) using primers ITS5 and ITS4 (1) aligned with deposited sequences from GenBank confirmed identity and revealed 99% to 100% DNA similarity with P. phaseolorum strains (AY577815, AF001020, HM012819, JQ936148). The isolate FM1 was used for pathogenicity testing. Five non-infected detached leaves and pods of 4-week-old lima bean were surface sterilized and inoculated by placing 10 μl of conidial suspension (106 conidia ml-1) on the surface of leaves and pods using either the wound/drop or non-wound/drop method and distilled water used as control (3). The inoculated leaves and pods were incubated at 25 °C and 98% RH, and the experiment was performed twice. Disease reactions and symptoms were evaluated after inoculation. After one week, typical symptoms of pod and stem blight appeared with formation of pycnidia on the surface of the tissues, but not on non-inoculated controls. P. phaseolorum var. sojae was consistently reisolated from symptoms. To our knowledge, this is the first report of P. phaseolorum var. sojae causing pod and stem blight of lima bean in Malaysia. References: (1) R. Ford et al. Aust. Plant Pathol. 33:559, 2004. (2) G. L. Hartman et al. Compendium of Soybean Diseases. 4th ed. American Phytopathological Society, St. Paul, MN, 1999. (3) P. P. Than et al. Plant Pathol. 57:562, 2008.
  13. Anwar MP, Juraimi AS, Mohamed MT, Uddin MK, Samedani B, Puteh A, et al.
    ScientificWorldJournal, 2013;2013:916408.
    PMID: 24223513 DOI: 10.1155/2013/916408
    Till now, herbicide seems to be a cost effective tool from an agronomic view point to control weeds. But long term efficacy and sustainability issues are the driving forces behind the reconsideration of herbicide dependent weed management strategy in rice. This demands reappearance of physical and cultural management options combined with judicious herbicide application in a more comprehensive and integrated way. Keeping those in mind, some agronomic tools along with different manual weeding and herbicides combinations were evaluated for their weed control efficacy in rice under aerobic soil conditions. Combination of competitive variety, higher seeding rate, and seed priming resulted in more competitive cropping system in favor of rice, which was reflected in lower weed pressure, higher weed control efficiency, and better yield. Most of the herbicides exhibited excellent weed control efficiency. Treatments comprising only herbicides required less cost involvement but produced higher net benefit. On the contrary, treatments comprising both herbicide and manual weeding required high cost involvement and thus produced lower net benefit. Therefore, adoption of competitive rice variety, higher seed rate, and seed priming along with spraying different early-postemergence herbicides in rotation at 10 days after seeding (DAS) followed by a manual weeding at 30 DAS may be recommended from sustainability view point.
  14. Rafii MY, Jalani BS, Rajanaidu N, Kushairi A, Puteh A, Latif MA
    Genet. Mol. Res., 2012;11(4):3629-41.
    PMID: 23096688 DOI: 10.4238/2012.October.4.10
    We evaluated 38 dura x pisifera (DP) oil palm progenies in four locations in Malaysia for genotype by environment interaction and genotypic stability studies. The DP progenies derived from crosses between pisifera palms of AVROS, Serdang S27B, Serdang 29/36, and Lever Cameroon were chosen to be the males' parent and Deli dura palms designated as females' parent. All the locations differed in terms of soil physical and chemical properties, and the soil types ranged from coastal clay to inland soils. The genotype by environment interaction and stability of the individual genotypes were analyzed for oil yield trait using several stability techniques. A genotype by environment interaction was detected for oil yield and it had a larger variance component than genotypic variance (σ(2)(gl)/σ(2)(g) = 139.7%). Genotype by environment interaction of oil yield was largely explained by a non-linear relationship between genotypic and environmental values. Overall assessment of individual genotypic stability showed that seven genotypes were highly stable and had consistent performance over the environments for the oil yield trait [total individual genotype stability scored more than 10 and mean oil yielded above the average of the environment (genotype means are more than 34.37 kg·palm(-1)·year(-1))]. These genotypes will be useful for oil palm breeding and tissue culture programs for developing high oil yielding planting materials with stable performance.
  15. Mondal MM, Puteh AB, Malek MA, Ismail MR, Rafii MY, Latif MA
    ScientificWorldJournal, 2012;2012:425168.
    PMID: 22919319 DOI: 10.1100/2012/425168
    Growth parameters such as leaf area (LA), total dry mass (TDM) production, crop growth rate (CGR), relative growth rate (RGR), and net assimilation rate (NAR) were compared in six varieties of mungbean under subtropical condition (24°8' N 90°0' E) to identify limiting growth characters for the efficient application of physiology breeding for higher yields. Results revealed that a relatively smaller portion of TDM was produced before flower initiation and the bulk of it after anthesis. The maximum CGR was observed during pod filling stage in all the varieties due to maximum leaf area (LA) development at this stage. Two plant characters such as LA and CGR contributed to the higher TDM production. Results indicated that high yielding mungbean varieties should possess larger LA, higher TDM production ability, superior CGR at all growth stages, and high relative growth rate and net assimilation rate at vegetative stage which would result in superior yield components.
  16. Anwar MP, Juraimi AS, Samedani B, Puteh A, Man A
    ScientificWorldJournal, 2012;2012:603043.
    PMID: 22778701 DOI: 10.1100/2012/603043
    Critical period of weed control is the foundation of integrated weed management and, hence, can be considered the first step to design weed control strategy. To determine critical period of weed control of aerobic rice, field trials were conducted during 2010/2011 at Universiti Putra Malaysia. A quantitative series of treatments comprising two components, (a) increasing duration of weed interference and (b) increasing length of weed-free period, were imposed. Critical period was determined through Logistic and Gompertz equations. Critical period varied between seasons; in main season, it started earlier and lasted longer, as compared to off-season. The onset of the critical period was found relatively stable between seasons, while the end was more variable. Critical period was determined as 7-49 days after seeding in off-season and 7-53 days in main season to achieve 95% of weed-free yield, and 23-40 days in off-season and 21-43 days in main season to achieve 90% of weed-free yield. Since 5% yield loss level is not practical from economic view point, a 10% yield loss may be considered excellent from economic view point. Therefore, aerobic rice should be kept weed-free during 21-43 days for better yield and higher economic return.
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links