Displaying publications 1 - 20 of 33 in total

Abstract:
Sort:
  1. Zhou W, Zhan Y, Jawing E
    Front Psychol, 2023;14:1290034.
    PMID: 37928571 DOI: 10.3389/fpsyg.2023.1290034
    In second language and foreign language learning, demotivation in learning is a common occurrence. Almost all previous studies on learners' demotivation focused on traditional classroom learning environment rather than blended learning setting. This paper investigates learner perceptions of demotivating factors for Chinese EFL college students in blended learning context. 272 college sophomores with varied majors from a university in Mid-East China took part in a questionnaire survey. The questionnaire, consisted of 34 4-point Likert type items about learners' demotivation in a blended EFL learning environment, was adapted from Kikuchi's demotivation questionnaire and Xie's LPDS (Learner Perceptions of Demotivator Scale). An exploratory factor analysis was performed to explore the factor structure of the questionnaire items. Then mean scores of items loading on each factor were calculated and independent samples t-test analysis was adopted to examine the differences of demotivating factors between different groups of participants. Five demotivating factors from the questionnaire were extracted. The findings reveal a newly discovered factor: learners' lack of self-discipline in online learning. The paper indicates that there is no significant difference of these five demotivating factors between male and female learners, and between rural and urban learners. Whereas less motivated learners perceive four among the five factors to be more demotivating than more motivated learners.
  2. Yang Z, Cui Q, Zhou W, Qiu L, Han B
    Mol Genet Genomic Med, 2019 06;7(6):e680.
    PMID: 30968607 DOI: 10.1002/mgg3.680
    BACKGROUND: Thalassemia is a common genetic disorder. High prevalence of thalassemia is found in South China, Southeast Asia, India, the Middle East, and the Mediterranean regions. Thalassemia was thought to exist only in southern China, but an increasing number of cases from northern China have been recently reported.

    METHODS: During 2012 to 2017, suspected thalassemia people were detected for common α- and β-thalassemia mutations by gap-Polymerase Chain Reaction (PCR) and reverse dot blot (RDB) analysis in Peking Union Medical College Hospital. One thousand and fifty-nine people with thalassemia mutations were analyzed retrospectively. We picked mutated individuals who originally came from northern areas, and conducted telephone follow-up survey in order to collect their ancestral information. Besides, we used "thalassemia", "mutation", and "Southeast Asian countries" as keywords to search the relevant studies in PubMed and Embase databases.

    RESULTS: All carriers included in our study were resided in northern China. Among them, 17.3% were native northerners and 82.7% were immigrants from southern China. Although substantial difference was found in α- and β-thalassemia ratio and detailed spectrum of α- and β-globin mutation spectrum between our data and data obtained from a previous meta-analysis literature focused on southern China, the most common gene mutations were the same. Similar β-thalassemia mutation spectrum was found among Thai, Malaysian Chinese, and Guangdong people, however, no other similarities in gene profile were found between Chinese and other ethnic groups in Southeast Asia.

    CONCLUSION: Chinese people in different areas had similar gene mutation, whereas they had significantly different mutation spectrums from other ethnic groups in Southeast Asia.

  3. Zhang X, Dang M, Zhang W, Lei Y, Zhou W
    Drug Dev Ind Pharm, 2020 Feb;46(2):264-271.
    PMID: 32000536 DOI: 10.1080/03639045.2020.1716377
    Topical drug delivery for local anesthetics has been an interesting area of research for formulators considering the resistance and barrier properties of skin and high clearance rate of drugs like prilocaine and lidocaine (duration of action < 2.5 h). In this study, efforts have been made to sustain the release of prilocaine and lidocaine by using depot microemulsion system. Drug loaded microemulsions were formulated using Capmul MCM, Pluronic F127, polyethylene glycol 200 (PEG 200) and water from pseudo-ternary diagrams. The Smix at 1:4 ratio showed larger microemulsion area in comparison to 1:2 ratio. The ex-vivo studies indicate sustained release of prilocaine and lidocaine from the microemulsion up to 8 h, in comparison to 4 h with ointments. Skin irritation study on rabbits confirmed the safety of drug loaded microemulsions for local drug delivery. The improved ex vivo data is reflected in the in vivo studies, were radiant heat tail-flick test and sciatic nerve model showed prolong duration of action for both prilocaine and lidocaine microemulsions in comparison to ointment. The in vitro and in vivo efficacy of prilocaine and lidocaine was non-significant. The improved efficacy was due to high penetration of microemulsion and depot effect due to local precipitation (destabilization of microemulsion) of drug in the skin layer. The sustained local anesthetic effect is highly desirable for the treatment of skin irritation due to skin burns and pre- and post-operative pain.
  4. Cheong MW, Chong ZS, Liu SQ, Zhou W, Curran P, Bin Yu
    Food Chem, 2012 Sep 15;134(2):686-95.
    PMID: 23107679 DOI: 10.1016/j.foodchem.2012.02.162
    Volatile compounds in the peel of calamansi (Citrus microcarpa) from Malaysia, the Philippines and Vietnam were extracted with dichloromethane and hexane, and then analysed by gas chromatography-mass spectroscopy/flame ionisation detector. Seventy-nine compounds representing >98% of the volatiles were identified. Across the three geographical sources, a relatively small proportion of potent oxygenated compounds was significantly different, exemplified by the highest amount of methyl N-methylanthranilate in Malaysian calamansi peel. Principal component analysis and canonical discriminant analysis were applied to interpret the complex volatile compounds in the calamansi peel extracts, and to verify the discrimination among the different origins. In addition, four common hydroxycinnamic acids (caffeic, p-coumaric, ferulic and sinapic acids) were determined in the methanolic extracts of calamansi peel using ultra-fast liquid chromatography coupled to photodiode array detector. The Philippines calamansi peel contained the highest amount of total phenolic acids. In addition, p-Coumaric acid was the dominant free phenolic acids, whereas ferulic acid was the main bound phenolic acid.
  5. Cheong MW, Zhu D, Sng J, Liu SQ, Zhou W, Curran P, et al.
    Food Chem, 2012 Sep 15;134(2):696-703.
    PMID: 23107680 DOI: 10.1016/j.foodchem.2012.02.139
    Calamansi juices from three countries (Malaysia, the Philippines and Vietnam) were characterised through measuring volatiles, physicochemical properties and non-volatiles (sugars, organic acids and phenolic acids). The volatile components of manually squeezed calamansi juices were extracted using dichloromethane and headspace solid-phase microextraction, and then analysed using gas chromatography-mass spectrometry/flame ionisation detector, respectively. A total of 60 volatile compounds were identified. The results indicated that the Vietnam calamansi juice contained the highest amount of volatiles. Two principal components obtained from principal component analysis (PCA) represented 89.65% of the cumulative total variations of the volatiles. Among the non-volatile components, these three calamansi juices could be, to some extent, differentiated according to fructose and glucose concentrations. Hence, this study of calamansi juices could lead to a better understanding of calamansi fruits.
  6. Li JH, Vicknasingam B, Cheung YW, Zhou W, Nurhidayat AW, Jarlais DC, et al.
    Subst Abuse Rehabil, 2011;2:11-20.
    PMID: 24474851 DOI: 10.2147/SAR.S15458
    Ketamine, a derivative of phencyclidine that was developed in the 1960s, is an anesthetic and analgesic with hallucinogenic effects. In this paper, the pharmacological and toxicological effects of ketamine are briefly reviewed. Ketamine possesses a wide safety margin but such a therapeutic benefit is somewhat offset by its emergence phenomenon (mind-body dissociation and delirium) and hallucinogenic effects. The increasing abuse of ketamine, initially predominantly in recreational scenes to experience a "k-hole" and other hallucinatory effects but more recently also as a drug abused during the workday or at home, has further pushed governments to confine its usage in many countries. Recently, urinary tract dysfunction has been associated with long-term ketamine use. In some long-term ketamine users, such damage can be irreversible and could result in renal failure and dialysis. Although ketamine has not yet been scheduled in the United Nations Conventions, previous studies using different assessment parameters to score the overall harms of drugs indicated that ketamine may cause more harm than some of the United Nations scheduled drugs. Some countries in Southeast and East Asia have reported an escalating situation of ketamine abuse. Dependence, lower urinary tract dysfunction, and sexual impulse or violence were the most notable among the ketamine-associated symptoms in these countries. These results implied that the danger of ketamine may have been underestimated previously. Therefore, the severity levels of the ketamine-associated problems should be scrutinized more carefully and objectively. To prevent ketamine from being improperly used and evolving into an epidemic, a thorough survey on the prevalence and characteristics of illicit ketamine use is imperative so that suitable policy and measures can be taken. On the other hand, recent findings that ketamine could be useful for treating major depressive disorder has given this old drug a new impetus. If ketamine is indeed a remedy for treating depression, more research on the risks and benefits of its clinical use will be indispensable.
  7. He J, Sunarso J, Miao J, Sun H, Dai J, Zhang C, et al.
    J Hazard Mater, 2019 05 05;369:699-706.
    PMID: 30831522 DOI: 10.1016/j.jhazmat.2019.02.070
    Effective regulation of p-phenylenediamine (PPD), a widely used precursor of hair dye that is harmful to human health in large concentration, relies upon an accurate yet simple detection of PPD. In this context, amperometric electrode sensor based on perovskite oxide becomes attractive given its portability, low cost, high sensitivity, and rapid processing time. This work reports the systematic characterization of a series of Sr-doped PrCoO3-δ perovskite oxides with composition of Pr1-xSrxCoO3-δ(x = 0, 0.2, 0.4, 0.6, 0.8, and 1) for PPD detection in an alkaline solution. PSC82 deposited onto glassy carbon electrode (PSC82/GCE) generates the highest redox currents which correlates with the highest hydrogen peroxide intermediates (HO2-) yield and the σ*-orbital (eg) filling of Co that is closest to unity for PSC82. PSC82/GCE provides the highest sensitivities of 655 and 308 μA mM-1 cm-2 in PPD concentration range of 0.5-2,900 and 2,900-10,400 μM, respectively, with a limit of detection of 0.17 μM. PSC82/GCE additionally demonstrates high selectivity to PPD and long term stability during 50 consecutive cyclic voltammetry scans and over 1-month storage period. The potential applicability of PSC82/GCE was also demonstrated by confirming the presence of very low concentration of PPD of below 0.5% in real hair dyes.
  8. Wang D, Wong SI, Sunarso J, Xu M, Wang W, Ran R, et al.
    ACS Appl Mater Interfaces, 2021 May 05;13(17):20105-20113.
    PMID: 33886260 DOI: 10.1021/acsami.1c02502
    Hydrocarbon-fueled solid oxide fuel cells (SOFCs) that can operate in the intermediate temperature range of 500-700 °C represent an attractive SOFC device for combined heat and power applications in the industrial market. One of the ways to realize such a device relies upon exploiting an in situ steam reforming process in the anode catalyzed by an anti-carbon coking catalyst. Here, we report a new Ni and Ru bimetal-doped perovskite catalyst, Ba(Zr0.1Ce0.7Y0.1Yb0.1)0.9Ni0.05Ru0.05O3-δ (BZCYYbNRu), with enhanced catalytic hydrogen production activity on n-butane (C4H10), which can resist carbon coking over extended operation durations. Ru in the perovskite lattice inhibits Ni precipitation from perovskite, and the high water adsorption capacity of proton conducting perovskite improves the coking resistance of BZCYYbNRu. When BZCYYbNRu is used as a steam reforming catalyst layer on a Ni-YSZ-supported anode, the single fuel cell not only achieves a higher power density of 1113 mW cm-2 at 700 °C under a 10 mL min-1 C4H10 continuous feed stream at a steam to carbon (H2O/C) ratio of 0.5 but also shows a much better operational stability for 100 h at 600 °C compared with those reported in the literature.
  9. Sun H, Chen G, Sunarso J, Dai J, Zhou W, Shao Z
    ACS Appl Mater Interfaces, 2018 May 23;10(20):16939-16942.
    PMID: 29741862 DOI: 10.1021/acsami.8b03702
    An abundant, highly active, and durable oxygen evolution reaction (OER) electrocatalyst is an enabling component for a more sustainable energy future. We report, herein, a molybdenum and niobium codoped B-site-ordered double perovskite oxide with a compositional formula of Ba2CoMo0.5Nb0.5O6-δ (BCMN) as an active and robust catalyst for OER in an alkaline electrolyte. BCMN displayed a low overpotential of 445 mA at a current density of 10 mA cm-2disk. BCMN also showed long-term stability in an alkaline medium. This work hints toward the possibility of combining a codoping approach with double perovskite structure formation to achieve significant enhancement in the OER performance.
  10. She S, Yu J, Tang W, Zhu Y, Chen Y, Sunarso J, et al.
    ACS Appl Mater Interfaces, 2018 Apr 11;10(14):11715-11721.
    PMID: 29546981 DOI: 10.1021/acsami.8b00682
    Perovskite oxide is an attractive low-cost alternative catalyst for oxygen evolution reaction (OER) relative to the precious metal oxide-based electrocatalysts (IrO2 and RuO2). In this work, a series of Sr-doped La-based perovskite oxide catalysts with compositions of La1- xSr xFeO3-δ ( x = 0, 0.2, 0.5, 0.8, and 1) are synthesized and characterized. The OER-specific activities in alkaline solution increase in the order of LaFeO3-δ (LF), La0.8Sr0.2FeO3-δ (LSF-0.2), La0.5Sr0.5FeO3-δ (LSF-0.5), SrFeO3-δ (SF), and La0.2Sr0.8FeO3-δ (LSF-0.8). We establish a direct correlation between the enhancement in the specific activity and the amount of surface oxygen vacancies as well as the surface Fe oxidation states. The improved specific activity for LSF-0.8 is clearly linked to the optimum amount of surface oxygen vacancies and surface Fe oxidation states. We also find that the OER performance stability is a function of the crystal structure and the deviation in the surface La and/or Sr composition(s) from their bulk stoichiometric compositions. The cubic structure and lower deviation, as is the case for LSF-0.8, led to a higher OER performance stability. These surface performance relations provide a promising guideline for constructing efficient water oxidation.
  11. Chen G, Zhou W, Guan D, Sunarso J, Zhu Y, Hu X, et al.
    Sci Adv, 2017 06;3(6):e1603206.
    PMID: 28691090 DOI: 10.1126/sciadv.1603206
    Perovskite oxides exhibit potential for use as electrocatalysts in the oxygen evolution reaction (OER). However, their low specific surface area is the main obstacle to realizing a high mass-specific activity that is required to be competitive against the state-of-the-art precious metal-based catalysts. We report the enhanced performance of Ba0.5Sr0.5Co0.8Fe0.2O3-δ (BSCF) for the OER with intrinsic activity that is significantly higher than that of the benchmark IrO2, and this result was achieved via fabrication of an amorphous BSCF nanofilm on a surface-oxidized nickel substrate by magnetron sputtering. The surface nickel oxide layer of the Ni substrate and the thickness of the BSCF film were further used to tune the intrinsic OER activity and stability of the BSCF catalyst by optimizing the electronic configuration of the transition metal cations in BSCF via the interaction between the nanofilm and the surface nickel oxide, which enables up to 315-fold enhanced mass-specific activity compared to the crystalline BSCF bulk phase. Moreover, the amorphous BSCF-Ni foam anode coupled with the Pt-Ni foam cathode demonstrated an attractive small overpotential of 0.34 V at 10 mA cm-2 for water electrolysis, with a BSCF loading as low as 154.8 μg cm-2.
  12. Shen ZZ, Li K, Li ZJ, Shang XL, Hu F, Zhou WJ, et al.
    Trop Biomed, 2020 Jun 01;37(2):452-457.
    PMID: 33612814
    Toxoplasma gondii is a world-widely spread zoonotic parasite. However, scarce knowledge is known about the prevalence of T. gondii infection in people in Hubei province, China. This study herein was to perform epidemiological investigation of T. gondii infection in people in this region. A total 12527 blood samples were obtained during 2015-2018, and were assayed for T. gondii antibodies of IgG and IgM, respectively by employing an indirect hemagglutination test (IHA). The results discovered that the prevalence of T. gondii in people was 2.44% and 6.1%, respectively based on antibodies of IgG and IgM, respectively. The prevalence was ranged from 0.3% to 5.4% during 2015-2018 based on IgM antibodies. For genders, the prevalence was 0.7% and 2.6% in males and females, respectively based on IgM antibodies. In different years, the prevalence was ranged from 4.9% to 14.0% based on IgG antibodies. The prevalence of T. gondii was 4.9% and 6.6% in males and femalesy based on IgG antibodies. The current results may be helpful for the implementation of preventive measures against Toxoplasma infection among people living in this region.
  13. Shen Y, Zhu Y, Sunarso J, Guan D, Liu B, Liu H, et al.
    Chemistry, 2018 May 11;24(27):6950-6957.
    PMID: 29411451 DOI: 10.1002/chem.201705675
    Because of their structural and compositional flexibility, perovskite oxides represent an attractive alternative electrocatalyst class to precious metals for the oxygen reduction reaction (ORR); an important reaction in fuel cells and metal-air batteries. Partial replacement of the original metal cation with another cation, namely, doping, can be used to tailor the ORR activity of perovskite, for which a metal has been exclusively used as the dopant component in the past. Herein, phosphorus is proposed as a non-metal dopant for the cation site to develop a new perovskite family with the formula of La0.8 Sr0.2 Mn1-x Px O3-δ (x=0, 0.02, 0.05, and 0.1; denoted as LSM, LSMP0.02, LSMP0.05, and LSMP0.1, respectively). Powder XRD patterns reveal that the solubility of phosphorus in the perovskite structure is around 0.05. Rotating ring-disk electrode experiments in the form of linear-sweep voltammetry scans demonstrated the best ORR performance for LSMP0.05, and also revealed close to a four-electron ORR pathway for all four compositions. A chronoamperometric test (9000 s) and 500 cycle accelerated durability test demonstrated higher durability for LSMP0.05 relative to that of LSM and the commercial 20 wt % Pt/C catalyst. The higher ORR activity for LSMP0.05 is attributed to the optimised average valence of Mn, as evidenced by combined X-ray photoelectron spectroscopy and soft X-ray absorption spectroscopy data. Doping phosphorus into perovskites is an effective way to develop high-performance electrocatalysts for ORR.
  14. Miao J, Sunarso J, Duan X, Zhou W, Wang S, Shao Z
    J Hazard Mater, 2018 May 05;349:177-185.
    PMID: 29425884 DOI: 10.1016/j.jhazmat.2018.01.054
    The efficient oxidative removal of persistent organic components in wastewater relies on low-cost heterogeneous catalysts that offer high catalytic activity, stability, and recyclability. Here, we designed a series of nanostructured Co-Mn containing perovskite catalysts, LaCo1-xMnxO3+δ (LCM, x = 0, 0.3, 0.5, 0.7, and 1.0), with over-stoichiometric oxygen (δ > 0) to show superior catalytic activity for the degradation of a variety of persistent aqueous organic pollutants by activating peroxymonosulfate (PMS). The nature of LCM for catalysis was comprehensively investigated. A "volcano-shaped" correlation was observed between the catalytic activity and electron filling (eg) of Co in LCM. Among these compounds, LaCo0.5Mn0.5O3+δ (LCM55) exhibited an excellent activity with eg = 1.27. The high interstitial oxygen ion diffusion rate (DO2- = 1.58 ± 0.01 × 10-13 cm2 s-1) of LCM55 also contributes to its catalytic activity. The enhanced stability of LCM55 can be ascribed to its stronger relative acidity (3.22). Moreover, an increased solution pH (pH ≥ 7) generated a faster organic degradation rate and a decrease in metal leaching (0.004 mM) for LCM55 perovskite, justifying it as a potential material for environmental remediation.
  15. Miao J, Sunarso J, Su C, Zhou W, Wang S, Shao Z
    Sci Rep, 2017 03 10;7:44215.
    PMID: 28281656 DOI: 10.1038/srep44215
    Perovskite-like oxides SrCo1-xTixO3-δ (SCTx, x = 0.1, 0.2, 0.4, 0.6) were used as heterogeneous catalysts to activate peroxymonosulfate (PMS) for phenol degradation under a wide pH range, exhibiting more rapid phenol oxidation than Co3O4 and TiO2. The SCT0.4/PMS system produced a high activity at increased initial pH, achieving optimized performance at pH ≥ 7 in terms of total organic carbon removal, the minimum Co leaching and good catalytic stability. Kinetic studies showed that the phenol oxidation kinetics on SCT0.4/PMS system followed the pseudo-zero order kinetics and the rate on SCT0.4/PMS system decreased with increasing initial phenol concentration, decreased PMS amount, catalyst loading and solution temperature. Quenching tests using ethanol and tert-butyl alcohol demonstrated sulfate and hydroxyl radicals for phenol oxidation. This investigation suggested promising heterogeneous catalysts for organic oxidation with PMS, showing a breakthrough in the barriers of metal leaching, acidic pH, and low efficiency of heterogeneous catalysis.
  16. Zhang Y, Knibbe R, Sunarso J, Zhong Y, Zhou W, Shao Z, et al.
    Adv Mater, 2017 Dec;29(48).
    PMID: 28628239 DOI: 10.1002/adma.201700132
    Solid-oxide fuel cells (SOFCs) are electricity generators that can convert the chemical energy in various fuels directly to the electric power with high efficiency. Recent advances in materials and related key components for SOFCs operating at ≈500 °C are summarized here, with a focus on the materials, structures, and techniques development for low-temperature SOFCs, including the analysis of most of the critical parameters affecting the electrochemical performance of the electrolyte, anode, and cathode. New strategies, such as thin-film deposition, exsolution of nanoparticles from perovskites, microwave plasma heating, and finger-like channeled electrodes, are discussed. These recent developments highlight the need for electrodes with higher activity and electrolytes with greater conductivity to generate a high electrochemical performance at lower temperatures.
  17. Zhou W, Zeng S, Yu J, Xiang J, Zhang F, Takriff MS, et al.
    J Basic Microbiol, 2023 Feb;63(2):223-234.
    PMID: 36538731 DOI: 10.1002/jobm.202200528
    In this study, selected properties of protease and the complete genome sequence of Bacillus licheniformis NWMCC0046 were investigated, to discover laundry applications and other potential probiotic properties of this strain. Partial characterization of B. licheniformis NWMCC0046 showed that its protease has good activity both in alkaline environments and at low temperatures. Also, the protease is compatible with commercial detergents and can be used as a detergent additive for effective stain removal at low temperatures. The complete genome sequence of B. licheniformis NWMCC0046 is comprised of a 4,321,565 bp linear chromosome with a G + C content of 46.78% and no plasmids. It had 4504 protein-encoding genes, 81 transfer RNA (tRNA) genes, and 24 ribosomal RNA (rRNA) genes. Genomic analysis revealed genes involved in exocellular enzyme production and probiotic properties. In addition, genomic sequence analysis revealed specific genes encoding carbohydrate metabolism pathways, resistance, and cold adaptation capacity. Overall, protease properties show its potential as a detergent additive enzyme. The complete genome sequence information of B. licheniformis NWMCC0046 was obtained, and functional prediction revealed its numerous probiotic properties.
  18. Zhu C, Zhou W, Han M, Yang Y, Li Y, Jiang Q, et al.
    Sci Total Environ, 2023 Sep 15;891:164460.
    PMID: 37247739 DOI: 10.1016/j.scitotenv.2023.164460
    Microplastics and nanoplastics (MPs and NPs) are abundant, persistent, and widespread environmental pollutants that are of increasing concern as they pose a serious threat to ecosystems and aquatic species. Identifying the ecological effects of NPs pollution requires understanding the effects of changing nanoplastics concentrations in aquatic organisms. Monopterus albus were orally fed three different concentrations of 100 nm polystyrene nanoplastics (PS-NPs): 0.05 %, 0.5 %, and 1 % of the feed for 28 days. Nanoplastics significantly activated the PPAR signaling pathway, Acyl-CoA oxidase 1 (ACOX1), carnitine palmitoyltransferase 1a (CPT1A), angiopoietin-like 4 (ANGPTL4), and phosphoenolpyruvate carboxykinase (PCK) at the mRNA level, resulting in disturbed lipid metabolism. Glutathione peroxidase (GSH-px) activity, catalase (CAT) activity, and malondialdehyde (MDA) were significantly elevated in the high nanoplastics-feeding exposure group, leading to oxidative stress in the liver. Overexpression of the cytokines genes Interleukin 1 (IL1B) and Interleukin-8 (IL8), Tumor necrosis factor alpha (TNF-α), activation of MAPK signaling pathway, and increased gene expression of c-Jun amino-terminal kinases (JNK) and p38 indicate that exposure to NPs may lead to hepatopancreas apoptosis through oxidative stress and inflammation. In summary, dietary PS-NPs exposure alters hepatic glycolipid metabolism, triggering inflammatory responses and apoptosis in M. albus. The results of this study provide valuable ecotoxicological data for a better understanding of the biological fate and effects of nanoplastics in M. albus.
  19. Li B, He Z, Peters R, Allender S, Zou Y, Zhou W, et al.
    Int J Behav Nutr Phys Act, 2023 Sep 18;20(1):111.
    PMID: 37723534 DOI: 10.1186/s12966-023-01510-5
    BACKGROUND: Group Model Building (GMB) is a participatory system dynamics method increasingly used to address complex public health issues like obesity. GMB represents a set of well-defined steps to engage key stakeholders to identify shared drivers and solutions of a given problem. However, GMB has not yet been applied specifically to develop multi-duty interventions that address multiple inter-related issues such as malnutrition in all its forms (MIAIF). Moreover, a recent systematic review of empirical applications of a systems approach to developing obesity interventions found no published work from non-western, low- and middle-income countries (LMICs). In this paper we describe adaptations and innovations to a common GMB process to co-develop systemic MIAIF interventions with Chinese decision-makers.

    METHODS: We developed, piloted and implemented multiple cultural adaptations and two methodological innovations to the commonly used GMB process in Fang Cheng Gang city, China. We included formal, ceremonial and policy maker engagement events before and between GMB workshops, and incorporated culturally tailored arrangements during participant recruitment (officials of the same seniority level joined the same workshop) and workshop activities (e.g., use of individual scoring activities and hand boards). We made changes to the commonly used GMB activities which enabled mapping of shared drivers of multiple health issues (in our case MIAIF) in a single causal loop diagram. We developed and used a 'hybrid' GMB format combining online and in person facilitation to reduce travel and associated climate impact.

    RESULTS: Our innovative GMB process led to high engagement and support from decision-makers representing diverse governmental departments across the whole food systems. We co-identified and prioritised systemic drivers and intervention themes of MIAIF. The city government established an official Local Action Group for long-term, inter-departmental implementation, monitoring and evaluation of the co-developed interventions. The 'hybrid' GMB format enabled great interactions while reducing international travel and mitigating limitations of fully online GMB process.

    CONCLUSIONS: Cultural and methodological adaptations to the common GMB process for an Asian LMIC setting were successful. The 'hybrid' GMB format is feasible, cost-effective, and more environmentally friendly. These cultural adaptations could be considered for other Asian settings and beyond to address inter-related, complex issues such as MIAIF.

  20. Lin XF, Wong SY, Zhou W, Shen W, Li W, Tsai CC
    Int J Sci Math Educ, 2023 May 04.
    PMID: 37363784 DOI: 10.1007/s10763-023-10376-9
    Research evidence indicated that a specific type of augmented reality-assisted (AR-assisted) science learning design or support might not suit or be effective for all students because students' cognitive load might differ according to their experiences and individual characteristics. Thus, this study aimed to identify undergraduate students' profiles of cognitive load in AR-assisted science learning and to examine the role of their distinct profiles in self-efficacy together with associated behavior patterns in science learning. After ensuring the validity and reliability of each measure, a latent profile analysis confirmed that 365 Chinese undergraduates carried diverse dimensions of cognitive load simultaneously. The latent profile analysis findings revealed four fundamental profiles: Low Engagement, Immersive, Dabbling, and Organized, characterized as carrying various respective cognitive loads. The multivariate analysis of variance findings revealed different levels of the six AR science learning self-efficacy dimensions across profiles. Low Engagement students displayed the lowest self-efficacy among all dimensions. Organized students recorded better conceptual understanding and higher-order cognitive skills than Dabbling ones. Students with the Immersive profile had the highest science learning self-efficacy. The lag sequential analysis results showed significant differences in behavior patterns among profiles. Among them, profiles with social interaction, test, and reviewing feedback behavior had a significantly higher score for self-efficacy than those patterns mainly based on test learning and resource visits. This finding provides a unified consideration of students' diverse profiles and can inform interventions for effective design of AR-assisted science learning to match appropriate strategies to facilitate the science learning effect.
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links