METHODS: Twenty volumes of interests consisting of six anterior and fourteen posterior edentulous regions were obtained from human mandibular cadavers. A CBCT system with a resolution of 80 µm (3D Accuitomo 170, J. Morita, Kyoto, Japan) and a µCT system with a resolution of 35 µm (SkyScan 1173, Kontich, Belgium) were used to scan the mandibles. Three structural parameters namely, trabecular number (Tb.N), trabecular thickness (Tb.Th), and trabecular separation (Tb.Sp) were analysed using CTAn software (v 1.11, SkyScan, Kontich, Belgium). For each system, the measurements obtained from anterior and posterior regions were tested using independent sample t-test. Subsequently, all measurements between systems were tested using paired t-test.
RESULTS: In CBCT, all parameters of the anterior and posterior mandible showed no significant differences (p > 0.05). However, µCT showed a significant different of Tb.Th (p = 0.023) between anterior and posterior region. Regardless of regions, the measurements obtained using both imaging systems were significantly different (p ≤ 0.021) for Tb.Th and Tb.N.
CONCLUSIONS: The current study demonstrated that only the variation of Tb.Th between anterior and posterior edentulous region of mandible can be detected using µCT. In addition, CBCT is less feasible than µCT in assessing trabecular bone microstructures at both regions.
METHODS: Relevant data from multiple data sources which include national oral health and health surveys, national census, extensive systematic literature reviews, as well as discussion with experts, were used to estimate the economic burden of non-surgical periodontal management in specialist clinics in Malaysia in 2020. This estimation was done from the oral healthcare provider's perspective in both public and private sectors using an irreducible Markov model of 3-month cycle length over a time horizon of one year.
RESULTS: In 2020, the national economic burden of non-surgical periodontal treatment during the first year of periodontal management in specialist clinics in Malaysia was MYR 696 million (USD 166 million), ranging from MYR 471 million (USD 112 million) to MYR 922 million (USD 220 million). Of these, a total of MYR 485 million (USD 115 million) and MYR 211 million (USD 50 million) were the direct oral healthcare cost in public and private dental clinics, respectively.
CONCLUSION: The findings of this study demonstrated substantial economic burden of non-surgical periodontal management in specialist clinics in Malaysia. Being a life-long disease, these findings highlight the importance of enforcing primary and secondary preventive measures. On the strength and reliability of this economic evidence, this study provides vital information to inform policy- and decision-making regarding the future direction of managing periodontitis in Malaysia.
METHODS: The data were part of a cross-sectional study that had systematically and randomly selected patients with > 10% total burn surface area from a burn centre in Pakistan. The oral health status (DMFT, CPI, OHI-S) and severity of facial disfigurement were assessed. Validated instruments in the Urdu language were self-administered and information relating to oral health behaviour (brushing and dental visits), oral health-related quality of life (OHIP-14), satisfaction with appearance, self-esteem, anxiety and depression, resilience, and social support were collected. The statistical analyses included simple linear regression, Pearson correlation, t-test, and ANOVA. Mediation analysis was carried out to examine the indirect effect by oral health behaviour.
RESULTS: From a total of 271 participants, the majority had moderate to severe facial disfigurement (89%), low self-esteem (74.5%), and moderate to high levels of social support (95%). The level of satisfaction with appearance was low, whereas anxiety and depression were high. Disfigurement and satisfaction with appearance were associated with lower self-esteem and social support (p
METHOD: An electronic search was performed on Web of science, PubMed, and Scopus. Micro-CT journal studies investigated the root and canal anatomy of permanent double-rooted mandibular first molars were included. Data on study characteristics, objectives of interest, specifications of the studies, and micro-CT specifications were extracted. Risk of bias assessment (ROB) of the included studies was performed using Anatomical Quality Assessment (AQUA) tool. The extracted data were presented in tables and figures to present and synthesise the results. A meta-analysis was performed for the studies related to the prevalence of Vertucci's canal configurations, middle mesial canal (MMC) configurations, and Fan's isthmus types.
RESULTS: Amongst 1358 identified studies, thirty met the inclusion criteria. In terms of the objectives, the selected studies showed high anatomical variability in mandibular first molars. Twenty-two (73%), 25 (83%), and 12 (40%) of the studies reported the population/ethnicity, micro-CT specifications, and ethical approval, respectively. 28 (93%) studies did not disclose the method of sample size estimation. In only 6 (20%) of the studies, the authors had calibrated the assessment approaches. Mostly, a potential ROB was reported in domain 1 (objective(s) and subject characteristics) and domain 3 (methodology characterization). Whilst, low risk was reported in domains 2 (study design), 4 (descriptive anatomy), and 5 (reporting of results). The overall ROB was reported to be ''moderate'' in the vast majority of the studies (27/30). Meta-analysis results showed high levels of heterogeneity among the studies related to MMCs (I2 = 86%) and Fan's isthmus (I2 = 87%). As for the root canal configuration, pooled prevalence showed that Vertucci type IV and type I were the most prevalent in mesial and distal root canals, respectively.
CONCLUSION: Based on moderate risk of bias level of evidence, micro-CT studies have shown wide range of qualitative and quantitative data presentations of the roots and canals in mandibular first molars. Protocol and registration. The protocol of this systematic review was prospectively registered in the Open Science Framework database ( https://osf.io ) on 2022-06-20 with the registration number 10.17605/OSF.IO/EZP7K.
METHODOLOGY: An electronic search was conducted in PubMed / Medline, Scopus, Google Scholar, and Web of Science databases until January 2023 to retrieve related studies. "Root canal morphology," "Saudi Arabia," "Micro-CT," and "cone-beam computed tomography" were used as keywords. A modified version of previously published risk of bias assessment tool was used to determine the quality assessment of included studies.
RESULTS: The literature search revealed 47 studies that matched the criteria for inclusion, out of which 44 studies used cone beam computed tomography (CBCT) and three were micro-computed tomography (micro-CT) studies. According to the modified version of risk of bias assessment tool, the studies were categorized as low, moderate, and high risk of bias. A total of 47,612 samples were included which comprised of either maxillary teeth (5,412), or mandibular teeth (20,572), and mixed teeth (21,327). 265 samples were used in micro-CT studies while 47,347 teeth samples were used in CBCT studies. Among the CBCT studies, except for three, all the studies were retrospective studies. Frequently used imaging machine and software were 3D Accuitomo 170 and Morita's i-Dixel 3D imaging software respectively. Minimum and maximum voxel sizes were 75 and 300 μm, Vertucci's classification was mostly used to classify the root canal morphology of the teeth. The included micro-CT studies were in-vitro studies where SkyScan 1172 X-ray scanner was the imaging machine with pixel size ranging between 13.4 and 27.4 μm. Vertucci, Ahmed et al. and Pomeranz et al. classifications were applied to classify the root canal morphology.
CONCLUSION: This systematic review revealed wide variations in root and canal morphology of Saudi population using high resolution imaging techniques. Clinicians should be aware of the common and unusual root and canal anatomy before commencing root canal treatment. Future micro-CT studies are needed to provide additional qualitative and quantitative data presentations.
METHODS: This article was divided into the following parts: Part 1 Surface roughness and substance loss: an in vitro study, which involves intact extracted teeth sectioned and treated using a piezoelectric ultrasonic device (PM200 EMS Piezon, Switzerland) with a conventional scaler tip (FS-407) and a Perio Slim (PS) scaler tip (Perio Slim DS-016A). All sectioned samples for tooth surface roughness (n = 20) and tooth substance loss (n = 46) analyses were measured and compared using a 3D surface texture analyser and scanning electron microscope (SEM) respectively, at baseline and following scaling. Part 2 Pain Perception: a clinical study, which was a split mouth study design including 30 participants with gingivitis and/or mild chronic periodontitis; treated with supra-gingival scaling from teeth #13 to #23. Subjects were randomised to group A or group B. Group A was treated first with PS scaler tips, whereas group B was treated first with conventional scaler tips. Pain perception was recorded using the visual analogue scale (VAS).
RESULTS: In vitro study: both scaler tips caused significant reduction in root substance roughness after scaling (p 0.05) was observed. The PS scaler tip caused statistically significantly less root substance loss (p
METHODS: A total of 48 periodontitis subjects (obese, n = 18; normal weight, n = 30) were recruited (hereafter will be referred as participants) to participate into a prospective, before and after clinical trial. Obesity status is defined by body mass index (BMI) criteria (obese: ≥30 kg/ m2; normal weight
METHODS: This cross-sectional study had randomly and systematically recruited facial burn patients from the Burn Care Center, Pakistan Institute of Medical Sciences, Islamabad, from June of 2016 to July of 2017. Intraoral examination recorded the DMFT, CPI and OHI-S. Information on the socio-demographic status, self-perceived oral health, oral health behaviours were collected using a self-administered questionnaire and; the burn characteristics were obtained from the patients' medical record. The t-test, ANOVA, SLR, and chi-square test were used to examine the relationship between oral health and each factor. A parameter was derived from the clinical indices using the principal component analysis and used in the multiple linear regression analysis to determine the important factors associated with oral health status.
RESULTS: A total of 271 burn patients (69% female and 31% male) had participated in the study. All of the participants had caries with mean DMFT = 10.96 (95%CI: 10.67, 11.25). There were 59.0% (95%CI: 53.15, 64.93%) and 66.1% (95%CI: 60.38, 71.73%) of the participants who had periodontitis and poor oral hygiene respectively. About 79 and 80% of the participants rated their dental and periodontal status as poor. About 78% reported brushing once daily and 89% did not practice regular dental visit. The DMFT, CPI and OHI-S were associated with the burn characteristics and oral health behaviours (p
METHODS: A multi-staged cluster sampling method was employed. A total of 598 16-year-old adolescents participated in this study. Participants' demographic profile was assessed through a self-administered questionnaire. Clinical examinations were carried out under standardized conditions by a single examiner. The level of GTW was recorded using the modified Smith and Knight's Tooth Wear Index (TWI) whilst ETW were recorded using the Basic Erosive Wear Examination (BEWE) index. This index was developed to record clinical findings and assist in the decision-making process for the management of erosive tooth wear. Dental caries was recorded using the D3MFT index whereby D3 denotes obvious dental decay into dentine detected visually.
RESULTS: The prevalence of GTW, ETW and dental caries, i.e. percentage of individuals found to have at least one lesion, was 99.8%, 45.0% and 27.8% respectively. Two thirds of affected teeth with GTW were observed to have a TWI score of 1 whereas almost all of the affected teeth with ETW had a BEWE score of 2. The mean D3MFT was 0.62 (95% CI 0.50, 0.73) with Decayed (D) teeth being the largest component, mean D3T was 0.36 (95% CI 0.30, 0.43). There was no significant association between socio-demographic factors and prevalence of ETW. Logistic regression analysis also showed no significant relationship between the prevalence of ETW and D3MFT (p > 0.05).
CONCLUSIONS: Almost all adolescents examined had GTW but they were mainly early lesions. However, nearly half were found to have ETW of moderate severity (BEWE score 2). No significant relationship between the occurrence of erosive tooth wear and caries was observed in this population.
METHODS: Twelve dental technicians with at least five years of professional experience and currently working in Malaysia agreed to participate in the one-to-one in-depth online interviews. Interviews were recorded, transcribed verbatim and translated. Thematic analysis was conducted to identify patterns, themes, and categories within the interview transcripts.
RESULTS: The analysis revealed two key themes: "Perceived Benefits of AI" and "Concerns and Challenges". Dental technicians recognised the enhanced efficiency, productivity, accuracy, and precision that AI can bring to dental laboratories. They also acknowledged the streamlined workflow and improved communication facilitated by AI systems. However, concerns were raised regarding job security, professional identity, ethical considerations, and the need for adequate training and support.
CONCLUSION: This research sheds light on the potential benefits and challenges associated with the integration of AI in dental laboratory practices. Understanding these perceptions and addressing the challenges can support the effective integration of AI in dental laboratories and contribute to the growing body of literature on AI in healthcare.
MATERIALS AND METHODS: In silico Molecular Dynamics (MD) was used to determine the interactions of K21 inside the pocket of the targeted protein (crystal structure of fibroblast collagenase-1 complexed to a diphenyl-ether sulphone based hydroxamic acid; PDB ID: 966C; Crystal structure of MMP-2 active site mutant in complex with APP-derived decapeptide inhibitor. MD simulations were accomplished with the Desmond package in Schrödinger Drug Discovery Suite. Blood samples (~ 0.5 mL) collected into K2EDTA were immediately transferred for further processing using the Litron MicroFlow® PLUS micronucleus analysis kit for mouse blood according to the manufacturer's instructions. Bacterial Reverse Mutation Test of K21 Molecule was performed to evaluate K21 and any possible metabolites for their potential to induce point mutations in amino acid-requiring strains of Escherichia coli (E. coli) (WP2 uvrA (tryptophan-deficient)).
RESULTS: Molecular Simulation depicted that K21 has a specific pocket binding on various MMPs and SrtA surfaces producing a classical clouting effect. K21 did not induce micronuclei, which are the result of chromosomal damage or damage to the mitotic apparatus, in the peripheral blood reticulocytes of male and female CD-1 mice when administered by oral gavage up to the maximum recommended dose of 2000 mg/kg. The test item, K21, was not mutagenic to Salmonella typhimurium (S. typhimurium) strains TA98, TA100, TA1535 and TA1537 and E. coli strain WP2 uvrA in the absence and presence of metabolic activation when tested up to the limit of cytotoxicity or solubility under the conditions of the test.
CONCLUSION: K21 could serve as a potent protease inhibitor maintaining the physical and biochemical properties of dental structures.
METHODOLOGY: Dentin blocks were sterilized and E. faecalis and C. albicans microbial colonies were counted for colony-forming-units against 2%k21, 2%CHX and Ca(OH)2 medicaments. Biofilm colonies after 7 days on dentin were analysed using confocal laser scanning microscopy with live/dead bacterial viability staining. TEM was done to study dentin collagen matrix. Dentin discs from 3rd day and 7th day well plate was used for Raman spectra and observed under fluorescent-microscope. Docking studies were carried out on MMP-2 S1 binding-domain with k21.
RESULTS: There was reduction of E. faecalis/C. albicans when k21, chlorhexidine and calcium hydroxide were used with highest percentage in 2%k21 treated specimens. 2%k21 showed dense and regular collagen network with intact cross-banding and decreased Raman intensity for 2%k21 on 3rd day. NaOCl + k21 showed least adherence, whereas saline groups showed highest adherence of E. faecalis and C. albicans to root-canal dentin. Alizarin red staining of hDPSCs revealed calcium deposition in all groups with significant difference seen amongst 2%k21 groups. MMP-2 ligand binding was seen accurately indicating possible target sites for k21 intervention.
CONCLUSION: 2%k21 can be considered as alternative intracanal medicament.
METHODS: This study is a single blind, randomized controlled trial with two parallel arms in which participants will be allocated to VRET or IP with a ratio of 1:1. Thirty participants (18-50 years) meeting the Phobia Checklist criteria of dental phobia will undergo block randomization with allocation concealment. The primary outcome measures include participants' dental trait anxiety (Modified Dental Anxiety Scale and Dental Fear Survey) and state anxiety (Visual Analogue Scale) measured at baseline (T0), at intervention (T1), 1-week (T2), 3 months (T3) and 6 months (T4) follow-up. A behavior test will be conducted before and after the intervention. The secondary outcome measures are real-time evaluation of HR and VR (Virtual Reality) experience (presence, realism, nausea) during and following the VRET intervention respectively. The data will be analyzed using intention-to-treat and per-protocol analysis.
DISCUSSION: This study uses novel non-invasive VRET, which may provide a possible alternative treatment for dental anxiety and phobia.
TRIAL REGISTRATION NUMBER: ISRCTN25824611 , Date of registration: 26 October 2015.
METHODS: The National Health and Morbidity Survey 2019, a cross-sectional nationwide household survey that focused on non-institutionalised Malaysians, provided the data for this study on adults in Malaysia who were 18 years of age and older. A two-stage stratified random sampling technique was employed to ensure national representativeness. Data was collected using a multilingual (Malay and English), structured, and validated questionnaire via face-to-face interviews from July to October 2019. The dependent variable was oral healthcare seeking behavior (sought oral healthcare and self-medication). Independent variables were predisposing, enabling and health needs factor based on Andersen's Behavioral Model. Descriptive statistics were used to describe the characteristics and oral healthcare seeking behavior of the respondents. The relationship between the independent and dependent variables were investigated using multivariable logistic regression analysis.
RESULTS: The analysis comprised a total of 10,134 respondents, representing about 18.2 million Malaysian adults aged 18 and above. The overall prevalence of Malaysian adults who self-reported dental problems was low (5.5%) and was slightly higher in the rural than urban population. Almost half sought treatment from healthcare practitioners, and almost a quarter self-medicated. Ethnicity was associated with seeking healthcare and self-medication among urban dwellers. Among the rural population, income level was associated with seeking healthcare while education level was associated with self-medication.
CONCLUSION: Disparities in oral healthcare seeking behaviors exist between Malaysians living in urban and rural areas. Future policies should adopt focused strategies that concentrate on oral healthcare accessibility and health literacy of the vulnerable and rural populations to achieve the best oral healthcare for this population group.
METHODS: Potential relevant undergraduate paediatric dentistry topics were initially drafted and revised according to the revised national competency statement. The final draft included 65 topics clustered under 18 domains. A fuzzy Delphi method was used and experts who fulfilled the inclusion criteria were invited to anonymously ranked the importance of relevant topics using a five-point Likert scale and proposed suitable cognitive and psychomotor levels for each topic. Fuzzy evaluation was then performed, and experts were considered to have reached a consensus if the following three conditions were achieved: (a). the difference between the average and expert rating data was ≤ 0.2; (b). the average expert consensus was ˃70%; and (c). the average fuzzy number was ≥ 0.5. Subsequently, the mean ratings were used to determine the cognitive and psychomotor levels.
RESULTS: 20 experts participated in the survey. 64 out of 65 paediatric dentistry topics were deemed acceptable. The average fuzzy number ranged from 0.36 to 0.85, while the average Likert score ranged from 3.05 to 5.00. The topic "Dental amalgam" was rejected based on expert consensus since the average fuzzy number was 0.36. The most significant topic was "Pit and fissure sealant", followed by "Preventive advice", "Early childhood caries", "Dental caries in children & adolescent", "Management of dental caries in paediatric patients", and "Consent" which were equally ranked as the second most important topics. According to Bloom's and Simpson's taxonomies, most of the paediatric dentistry topics were rated adequate for undergraduate students at the cognitive level of "Apply" (C3) and a psychomotor level of "Guided response" (P3).
CONCLUSION: The current study successfully identified relevant undergraduate paediatric dentistry topics using the fuzzy Delphi method, which can facilitate future educators to improve existing Malaysian undergraduate paediatric dental curricula.
METHODOLOGY: Data was collected for this cross-sectional study between August 2020 and January 2021 from 11-to-23 years old participants in 43-countries using an electronic validated questionnaire developed in five languages. Data collected included information on the dependent variables (the presence of oral conditions- gingival inflammation, dry mouth, change in taste and oral ulcers), independent variable (COVID-19 infection) and confounders (age, sex, history of medical problems and parents' educational level). Multilevel binary logistic regression was used for analysis.
RESULTS: Complete data were available for 7164 AYA, with 7.5% reporting a history of COVID-19 infection. A significantly higher percentage of participants with a history of COVID-19 infection than those without COVID-19 infection reported having dry mouth (10.6% vs 7.3%, AOR = 1.31) and taste changes (11.1% vs 2.7%, AOR = 4.11). There was a significant effect modification in the association between COVID-19 infection and the presence of dry mouth and change in taste by age and sex (P = 0.02 and