Displaying publications 1 - 20 of 432 in total

Abstract:
Sort:
  1. Ahmed S, Ahmed MZ, Rafique S, Almasoudi SE, Shah M, Jalil NAC, et al.
    Biomed Res Int, 2023;2023:5250040.
    PMID: 36726844 DOI: 10.1155/2023/5250040
    Antimicrobial resistance (AMR) is a ubiquitous public health menace. AMR emergence causes complications in treating infections contributing to an upsurge in the mortality rate. The epidemic of AMR in sync with a high utilization rate of antimicrobial drugs signifies an alarming situation for the fleet recovery of both animals and humans. The emergence of resistant species calls for new treatments and therapeutics. Current records propose that health drug dependency, veterinary medicine, agricultural application, and vaccination reluctance are the primary etymology of AMR gene emergence and spread. Recently, several encouraging avenues have been presented to contest resistance, such as antivirulent therapy, passive immunization, antimicrobial peptides, vaccines, phage therapy, and botanical and liposomal nanoparticles. Most of these therapies are used as cutting-edge methodologies to downplay antibacterial drugs to subdue the resistance pressure, which is a featured motive of discussion in this review article. AMR can fade away through the potential use of current cutting-edge therapeutics, advancement in antimicrobial susceptibility testing, new diagnostic testing, prompt clinical response, and probing of new pharmacodynamic properties of antimicrobials. It also needs to promote future research on contemporary methods to maintain host homeostasis after infections caused by AMR. Referable to the microbial ability to break resistance, there is a great ultimatum for using not only appropriate and advanced antimicrobial drugs but also other neoteric diverse cutting-edge therapeutics.
  2. Maqbool M, Tirmazi SSM, Shakoor A, Akram Z, Nazir R, Chohan AN, et al.
    Biomed Res Int, 2023;2023:1044541.
    PMID: 36845639 DOI: 10.1155/2023/1044541
    BACKGROUND: Despite of having improved endodontic file designs as well as the reinforced metal alloy file structure, intracanal endodontic file separation (EFS) is still a very problematic and worrisome dental incident, which usually occurs without any visible signs of permanent deformation. Further, there have been conflicting reports regarding the clinical significance of leaving separated files within root canals.

    AIMS: The aim of this study was to look into the current perceptions and awareness about file separation during endodontic treatment among the dental house officers (DHOs).

    MATERIALS AND METHODS: A novel validated questionnaire comprising of 15 close-ended questions was distributed anonymously via Google Forms through email to 1100 DHOs across Pakistan. The questionnaire consisted of two parts: the first component (Section I) collected demographic data and the second component (Section II) investigated the causes of EFS during root canal treatment. Following the completion of socioeconomic information, including age and gender, the DHOs were asked to answer a few questions about the various reasons for endodontic instrument fracture.

    RESULTS: A total of 800 responses were recorded, with an effective rate of 72.8%. The majority of the DHOs (p value < 0.001) perceived that endodontic instrument fracture occurred in the posterior (61.5%) and apical third of the canal (50.5%) and in older permanent dentition (67.3%), possibly due to patient anxiety (62%). Better choice of instrument (61.15%), operators' experience (95.3%), knowledge (87.5%), and proper root canal cleaning (91.1%) are believed to be the vital steps in reducing endodontic file separation/fracture. Furthermore, majority of them (p value < 0.001) perceived that stainless steel was a superior alloy for filing instruments. Manual files tend to be more prone to fractures due to repeated use than rotary files.

    CONCLUSION: This study demonstrated that young DHOs had adequate knowledge and awareness regarding the potential predisposing factors and handling techniques for EFS. This study thereby provides an evaluating tool to access the insights of the current perceptions and awareness of DHOs concerning EFS.

  3. Islam MB, Islam MI, Nath N, Emran TB, Rahman MR, Sharma R, et al.
    Biomed Res Int, 2023;2023:9967591.
    PMID: 37250749 DOI: 10.1155/2023/9967591
    Multidrug-resistant (MDR) pathogens have created a fatal problem for human health and antimicrobial treatment. Among the currently available antibiotics, many are inactive against MDR pathogens. In this context, heterocyclic compounds/drugs play a vital role. Thus, it is very much essential to explore new research to combat the issue. Of the available nitrogen-bearing heterocyclic compounds/drugs, pyridine derivatives are of special interest due to their solubility. Encouragingly, some of the newly synthesized pyridine compounds/drugs are found to inhibit multidrug-resistant S. aureus (MRSA). Pyridine scaffold bearing poor basicity generally improves water solubility in pharmaceutically potential molecules and has led to the discovery of numerous broad-spectrum therapeutic agents. Keeping these in mind, we have reviewed the chemistry, recent synthetic techniques, and bacterial preventative activity of pyridine derivatives since 2015. This will facilitate the development of pyridine-based novel antibiotic/drug design in the near future as a versatile scaffold with limited side effects for the next-generation therapeutics.
  4. Godman B, Wladysiuk M, McTaggart S, Kurdi A, Allocati E, Jakovljevic M, et al.
    Biomed Res Int, 2023;2023:9757348.
    PMID: 37065720 DOI: 10.1155/2023/9757348
    [This corrects the article DOI: 10.1155/2021/9996193.].
  5. Gangurde R, Jagota V, Khan MS, Sakthi VS, Boppana UM, Osei B, et al.
    Biomed Res Int, 2023;2023:6970256.
    PMID: 36760472 DOI: 10.1155/2023/6970256
    The application of computational approaches in medical science for diagnosis is made possible by the development in technical advancements connected to computer and biological sciences. The current cancer diagnosis system is becoming outmoded due to the new and rapid growth in cancer cases, and new, effective, and efficient methodologies are now required. Accurate cancer-type prediction is essential for cancer diagnosis and treatment. Understanding, diagnosing, and identifying the various types of cancer can be greatly aided by knowledge of the cancer genes. The Convolution Neural Network (CNN) and neural pattern recognition (NPR) approaches are used in this study paper to detect and predict the type of cancer. Different Convolution Neural Networks (CNNs) have been proposed by various researchers up to this point. Each model concentrated on a certain set of parameters to simulate the expression of genes. We have developed a novel CNN-NPR architecture that predicts cancer type while accounting for the tissue of origin using high-dimensional gene expression inputs. The 5000-person sample of the 1-D CNN integrated with NPR is trained and tested on the gene profile, mapping with various cancer kinds. The proposed model's accuracy of 94% suggests that the suggested combination may be useful for long-term cancer diagnosis and detection. Fewer parameters are required for the suggested model to be efficiently trained before prediction.
  6. Ahmad P, Khandaker MU, Khan A, Rehman F, Din SU, Ali H, et al.
    Biomed Res Int, 2022;2022:3605054.
    PMID: 36420094 DOI: 10.1155/2022/3605054
    A simple process based on the dual roles of both magnesium oxide (MgO) and iron oxide (FeO) with boron (B) as precursors and catalysts has been developed for the synthesis of borate composites of magnesium and iron (Mg2B2O5-Fe3BO6) at 1200°C. The as-synthesized composites can be a single material with the improved and collective properties of both iron borates (Fe3BO6) and magnesium borates (Mg2B2O5). At higher temperatures, the synthesized Mg2B2O5-Fe3BO6 composite is found thermally more stable than the single borates of both magnesium and iron. Similarly, the synthesized composites are found to prevent the growth of both gram-positive (Staphylococcus aureus) and gram-negative (Escherichia coli) pathogenic bacteria on all the tested concentrations. Moreover, the inhibitory effect of the synthesized composite increases with an increase in concentration and is more pronounced against S. aureus as compared to E. coli.
  7. Jaber M, Al-Samarrai B, Salah A, Varma SR, Karobari MI, Marya A
    Biomed Res Int, 2022;2022:9422299.
    PMID: 35039794 DOI: 10.1155/2022/9422299
    Methods: The study includes all fifth-year dental students registered at the College of Dentistry, Ajman University, in 2019/2020. One hundred and seventy students were invited to complete personality and performance measures using the Big Five Inventory (BFI) scale; the weighted grade point average (GPA) was used to assess students' academic performance.

    Results: Of the 170 participants, 60% were female and 40% were male. Participants ranged in age from twenty-four to twenty-seven years, with an average age of twenty-four years. There was a relationship between personality scores obtained for the students and their subsequent academic performance. The broad conscientiousness, competence, achievement, and dutifulness predicted academic and clinical success. The prediction accuracy of conscientiousness was improved by the inclusion of dutifulness, self-discipline, and deliberation.

    Conclusion: This study confirms that the students' personality profile is a substantial predictor of academic performance and likely to help select future intakes of students, although a prospective study would be required for a definite answer to this question.

  8. Rashid MF, Karobari MI, Halim MS, Noorani TY
    Biomed Res Int, 2022;2022:1263750.
    PMID: 35059458 DOI: 10.1155/2022/1263750
    Background: The caries preventive effect of Colgate Duraphat® and GC Tooth Mousse Plus® has been widely studied, but the remineralisation potential of initial occlusal caries using these two remineralisation materials remains unclear.

    Aim: This study is aimed at evaluating and comparing the remineralisation of early enamel caries on the occlusal surface of permanent posterior teeth using ICDAS II caries scoring system and DIAGNOdent Pen (DDPen) after remineralisation with Colgate Duraphat® and GC Tooth Mousse Plus®.

    Materials and Methods: Extracted posterior teeth (N = 120) with incipient occlusal caries were included in this study. The occlusal surface of each tooth was scored using DDPen and ICDAS II scoring before remineralisation. Then, remineralisation of the teeth of the experimental group was carried out using either CPP-ACP-F or fluoride varnish. After the remineralisation procedures, the occlusal surface of each tooth was again scored using DDPen and ICDAS II scoring. The teeth were then fixed in dental stone blocks and sectioned longitudinally for histological examination using a stereomicroscope. Statistical analysis was performed to calculate the sensitivity and specificity of DDPen and ICDAS II to detect remineralisation and compare with the gold standard histological examination.

    Results: According to ICDAS-II scores, a significant difference was noted in GC Tooth Mousse Plus® and Duraphat® study samples, whereas the difference between the pre-and post-remineralisation of the control group was not significant. According to the DDPen score criteria, a statistically significant difference was noted among all study groups; however, a greater significance level was noted in the GC Tooth Mousse Plus® and Duraphat® study samples compared with the control group. The Spearman's rank correlation of ICDAS-II and DDPen with Downer's histological score (gold standard) revealed a higher association of DDPen score (.738) as compared to ICDAS-II scores (.430).

    Conclusion: The study concluded that both ICDAS II and DDPen could detect remineralisation of early enamel occlusal caries. DDPen was more sensitive than ICDAS-II to detect remineralisation compared with the Downers histological scores.

  9. Assiry AA, Alnemari A, Adil AH, Karobari MI, Sayed FR, Marya A, et al.
    Biomed Res Int, 2022;2022:4968489.
    PMID: 35036434 DOI: 10.1155/2022/4968489
    Background: Working conditions, job satisfaction, and their overall impact on a dentist's job satisfaction are critical for future employment and retaining of dentists.

    Objectives: This study is aimed at determining the factors influencing the job satisfaction level among dentists. It is also aimed at evaluating how personal (age, gender) and professional (type, type of qualification, and year of practice) characteristics influence overall job satisfaction.

    Methods: For data collection, a structured self-administered questionnaire was used, in which one part collected information on personal characteristics. At the same time, the other contained a questionnaire related to job satisfaction. The German validated version of the questionnaire had a 10-point Warr-Cook-Wall (WCW) scale developed by Warr et al. in 1979. Each item was rated on a 5-point Likert scale, with 5 representing excessive satisfaction and 1 representing extreme dissatisfaction.

    Results: The results revealed that dentists in Saudi Arabia have a higher satisfaction level with "colleagues and fellow workers" (26.5%). The relation between the years of practice was highly significant. However, they were dissatisfied with their "income" (22.6%), and when compared with concerning age, gender, profession, and their practice years, this finding was highly significant.

    Conclusion: A higher percentage of satisfaction was seen with the "fellow and colleague's workers" dimension. At the same time, "income" was the aspect with which the dentists showed extreme dissatisfaction.

  10. Hameed HA, Hasan HA, Luddin N, Husein A, Ariffin A, Alam MK
    Biomed Res Int, 2022;2022:3675703.
    PMID: 35496039 DOI: 10.1155/2022/3675703
    AIM: To investigate and compare the cell cytotoxicity, proliferation, cell attachment, and morphology of human fetal osteoblasts (hFOB) cells of coated samples (titanium nanocopper (Ti Cu), titanium nanohydroxyapatite (Ti HA) and titanium nanocopper ion doped hydroxyapatite (Ti Cu/HA) and uncoated samples (Ti) in order to assess the suitability of these surface modifications on Ti-6Al-7Nb for dental implant application.

    MATERIALS AND METHODS: The cytotoxicity was studied by examining the hFOB cell response by MTT assessment. The cell morphology was evaluated by inverted microscopy and observed under scanning electronic microscopy (SEM).

    RESULTS: MTT assay results displayed that the Cu content on the surface of Ti-6Al-7Nb alloys did not produce any cytotoxic effect on cell viability. The cell viability rate in all samples ranges from 97% to 126%, indicating that hFOB cells grew at a high proliferation rate. However, no significant differences in cell viability were observed between Ti and Ti Cu and between Ti HA and Ti Cu/HA groups. Microscopic examination demonstrated no difference in the cell morphology of hFOB among all samples. In addition, SEM observation indicated favorable adhesion and spreading of the cells on the coated and uncoated samples.

    CONCLUSIONS: The surface modification of Ti-6Al-7Nb alloy with Cu, HA, and Cu/HA exhibits good cell biocompatibility, and the Cu has no influence on the cell proliferation and differentiation of hFOB.

  11. Awasthi A, Gulati M, Kumar B, Kaur J, Vishwas S, Khursheed R, et al.
    Biomed Res Int, 2022;2022:1659338.
    PMID: 35832856 DOI: 10.1155/2022/1659338
    Diabetic wound (DW) is a secondary application of uncontrolled diabetes and affects about 42.2% of diabetics. If the disease is left untreated/uncontrolled, then it may further lead to amputation of organs. In recent years, huge research has been done in the area of wound dressing to have a better maintenance of DW. These include gauze, films, foams or, hydrocolloid-based dressings as well as polysaccharide- and polymer-based dressings. In recent years, scaffolds have played major role as biomaterial for wound dressing due to its tissue regeneration properties as well as fluid absorption capacity. These are three-dimensional polymeric structures formed from polymers that help in tissue rejuvenation. These offer a large surface area to volume ratio to allow cell adhesion and exudate absorbing capacity and antibacterial properties. They also offer a better retention as well as sustained release of drugs that are directly impregnated to the scaffolds or the ones that are loaded in nanocarriers that are impregnated onto scaffolds. The present review comprehensively describes the pathogenesis of DW, various dressings that are used so far for DW, the limitation of currently used wound dressings, role of scaffolds in topical delivery of drugs, materials used for scaffold fabrication, and application of various polymer-based scaffolds for treating DW.
  12. Ren C, Su Z, Su Y, Wang L
    Biomed Res Int, 2022;2022:5152911.
    PMID: 36093408 DOI: 10.1155/2022/5152911
    Polyurethane, as a rubber material, can relieve the load on the ground and provide seismic design for the venue, which is of great significance for sports venues. In order to improve the seismic resistance and abrasion resistance of materials for sports fields and reduce accidents in sports, this article has carried out research on the polyurethane elastomer layered nanocomposites for sports fields and their preparation. Today's world is a challenging era of science and technology. The fields of biotechnology, information, medicine, energy, environment, and national defense and security are closely related to the development of high tech, and the requirements for materials are becoming increasingly diversified. Polymer nanocomposite coating has the dual characteristics of organic and inorganic components. It not only retains the advantages of a polymer but also endows it with versatility. It meets the current application needs. It is a hot spot in today's research. Among them, there are two major problems in the composite process of nanomaterials and polymers: dispersion and compatibility. How to improve the dispersion of nanoparticles and enhance the compatibility between nanoparticles and polymers is an urgent problem to be solved. In the method part, this article introduces a small amount of polyurethane and polyurethane elastomers formed after polyurethane modification and introduces layered compounds and nanocomposites and introduces several models involved in nanomaterials in terms of algorithms. In the analysis part, this paper conducts a comprehensive analysis of the hard segment mass fraction, mechanical properties, thermal decomposition behavior, degradation mechanism, and dynamic mechanical properties. With the increase of GO content, the tensile strength increases significantly and the elongation at break becomes smaller and smaller. When the GO content increases from 0% to 2%, the tensile properties of the WPU film increase from 2.6 MPa to 7.9 MPa and the fracture of the elongation decreased from 201.7% to 62.8%. This shows that the increase in GO content will make the composite material harder and brittle. It can be seen from the experimental results that the preparation of the polyurethane elastomer layered nanocomposite material designed in this paper has a good application effect on sports venues.
  13. Raja Sharin RNFS, Khan J, Ibahim MJ, Muhamad M, Bowen J, Wan Mohamad Zain WNI
    Biomed Res Int, 2022;2022:4165808.
    PMID: 35800225 DOI: 10.1155/2022/4165808
    Lapatinib, an orally administered small-molecule tyrosine kinase inhibitor (SM-TKI), is an effective treatment for ErbB2-positive breast cancer. However, its efficacy as one of the targeted cancer therapies has been hampered by several adverse effects, especially gastrointestinal toxicity, commonly manifested as diarrhoea. Although it can be generally tolerated, diarrhoea is reported as the most common and most impactful on a patient's quality of life and associated with treatment interruption. Severe diarrhoea can result in malabsorption, leading to dehydration, fatigue, and even death. ErbB1 is an epidermal growth factor profoundly expressed in normal gut epithelium while lapatinib is a dual ErbB1/ErbB2 tyrosine kinase inhibitor. Thus, ErbB1 inhibition by lapatinib may affect gut homeostasis leading to diarrhoea. Nevertheless, the underlying mechanisms remain unclear. This review article provides evidence of the possible mechanisms of lapatinib-induced diarrhoea that may be related to/or modulated by ErbB1. Insight regarding the involvement of ErbB1 in the pathophysiological changes such as inflammation and intestinal permeability as the underlying cause of diarrhoea is covered in this article.
  14. Elkhalifa AME, Elderdery AY, Al Bataj IA, Tamomh AG, Alyami MM, Almakrami HA, et al.
    Biomed Res Int, 2022;2022:4620037.
    PMID: 35224093 DOI: 10.1155/2022/4620037
    COVID-19 is a global pandemic viral infection that has affected millions worldwide. Limited data is available on the effect of COVID-19 on hematological parameters in Saudi Arabia. This study is aimed at examining the role of hematological parameters among COVID-19 patients admitted to King Khalid Hospital in Najran, Saudi Arabia. This is a retrospective, hospital-based study of 514 cases who were recruited during August to October 2020. 257 COVID-19 patients formed the study group, and a further 257 negative subjects formed the control group. Anemia was significantly elevated in positive subjects over controls (respectively, 64.2% and 35.8%), with patients 2.5 times more likely to be anemic (p < 0.01). Thrombocytopenia was higher in patients over controls (respectively, 62% and 38%), with patients ~1.7 times more likely to be thrombocytopenic (p < 0.01). Moreover, leukopenia was significantly higher in patients over controls (respectively, 71% and 29%), with positive subjects ~2.6 times more likely to be leukopenic. Our study results indicate that mild anemia associated with leukopenia may have diagnostic value for COVID-19. Careful assessment of hematological parameters, at baseline and throughout the disease path, will assist physicians in formulating personalized approaches to treatment and promptly offer intensive care to those in greater need.
  15. Selvan S, Thangaraj SJJ, Samson Isaac J, Benil T, Muthulakshmi K, Almoallim HS, et al.
    Biomed Res Int, 2022;2022:2003184.
    PMID: 35958813 DOI: 10.1155/2022/2003184
    Prenatal heart disease, generally known as cardiac problems (CHDs), is a group of ailments that damage the heartbeat and has recently now become top deaths worldwide. It connects a plethora of cardiovascular diseases risks to the urgent in need of accurate, trustworthy, and effective approaches for early recognition. Data preprocessing is a common method for evaluating big quantities of information in the medical business. To help clinicians forecast heart problems, investigators utilize a range of data mining algorithms to examine enormous volumes of intricate medical information. The system is predicated on classification models such as NB, KNN, DT, and RF algorithms, so it includes a variety of cardiac disease-related variables. It takes do with an entire dataset from the medical research database of patients with heart disease. The set has 300 instances and 75 attributes. Considering their relevance in establishing the usefulness of alternate approaches, only 15 of the 75 criteria are examined. The purpose of this research is to predict whether or not a person will develop cardiovascular disease. According to the statistics, naïve Bayes classifier has the highest overall accuracy.
  16. Thalluri C, Amin R, Mandhadi JR, Gacem A, Emran TB, Dey BK, et al.
    Biomed Res Int, 2022;2022:2467574.
    PMID: 36046453 DOI: 10.1155/2022/2467574
    Ondansetron tablets that are directly compressed using crospovidone and croscarmellose as a synthetic super disintegrant are the subject of this investigation. A central composite, response surface, randomly quadratic, nonblock (version 13.0.9.0) 32 factorial design is used to optimize the formulation (two-factor three-level). To make things even more complicated, nine different formulation batches (designated as F1-F9) were created. There were three levels of crospovidone and croscarmellose (+1, 0, -1). In addition to that, pre- and postcompressional parameters were evaluated, and all evaluated parameters were found to be within acceptable range. Among all postcompressional parameter dispersion and disintegration time, in vitro drug release experiments (to quantify the amount of medication released from the tablet) and their percentage prediction error were shown to have a significant influence on three dependent variables. Various pre- and postcompression characteristics of each active component were tested in vitro. Bulk density, tap density, angle of repose, Carr's index, and the Hausner ratio were all included in this analysis, as were many others. This tablet's hardness and friability were also assessed along with its dimension and weight variations. Additional stability studies may be conducted using the best batch of the product. For this study, we utilised the Design-Expert software to select the formulation F6, which had dispersion times of 17.67 ± 0.03 seconds, disintegration times of 120.12 ± 0.55 seconds, and percentage drug release measurements of 99.25 ± 0.36 within 30 minutes. Predicted values and experimental data had a strong correlation. Fast dissolving pills of ondansetron hydrochloride may be created by compressing the tablets directly.
  17. Rashid S, Anjum S, Ahmad A, Nadeem R, Ahmed M, Shah SAA, et al.
    Biomed Res Int, 2022;2022:6865472.
    PMID: 35865666 DOI: 10.1155/2022/6865472
    Betamethasone is an important glucocorticoids (GCs), frequently used to cure allergies (such as asthma and angioedema), Crohn's disease, skin diseases (such as dermatitis and psoriasis), systemic lupus erythematosus, rheumatic disorders, and leukemia. Present investigation deals to find potential agonist of glucocorticoid receptors after biotransformation of betamethasone dipropionate (1) and to carry out the molecular docking and ADME analyses. Biotransformation of 1 was carried out with Launaea capitata (dandy) roots and Musa acuminate (banana) leaves. M. acuminate furnished low-cost value-added products such as Sananone dipropionate (2) in 5% yields. Further, biocatalysis of Sananone dipropionate (2) with M. acuminate gave Sananone propionate (3) and Sananone (4) in 12% and 7% yields, respectively. However, Sananone (4) was obtained in 37% yields from Launaea capitata. Compound 5 was obtained in 11% yield after β-elimination of propionic acid at C-17 during oxidation of compound 1. The structure elucidation of new compounds 2-5 was accomplished through combined use of X-ray diffraction and NMR (1D and 2D) studies. In addition to this, molecular docking and ADME analyses of all transformed products of 1 were also done. Compounds 1-5 showed -12.53 to -10.11 kcal/mol potential binding affinity with glucocorticoid receptor (GR) and good ADME profile. Moreover, all the compounds showed good oral bioavailability with the octanol/water partition coefficient in the range of 2.23 to 3.65, which indicated that compounds 1-5 were in significant agreement with the given criteria to be considered as drug-like.
  18. Teh YM, Lim SK, Jusoh N, Osman K, Mualif SA
    Biomed Res Int, 2021;2021:6671552.
    PMID: 33506028 DOI: 10.1155/2021/6671552
    Minimal change disease (MCD) is the most common cause of idiopathic nephrotic syndrome in children, and it is well known for its multifactorial causes which are the manifestation of the disease. Proteinuria is an early consequence of podocyte injury and a typical sign of kidney disease. Steroid-sensitive patients react well with glucocorticoids, but there is a high chance of multiple relapses. CD80, also known as B7-1, is generally expressed on antigen-presenting cells (APCs) in steroid-sensitive MCD patients. Various glomerular disease models associated with proteinuria demonstrated that the detection of CD80 with the increase of urinary CD80 was strongly associated closely with frequent-relapse MCD patients. The role of CD80 in MCD became controversial because one contradicts finding. This review covers the treatment alternatives for MCD with the insight of CD80 as a potential therapeutic target. The promising effectiveness of CD20 (rituximab) antibody and CD80 inhibitor (abatacept) encourages further investigation of CD80 as a therapeutic target in frequent-relapse MCD patients. Therapeutic-based antibody towards CD80 (galiximab) had never been investigated in MCD or any kidney-related disease; hence, the role of CD80 is still undetermined. A new therapeutic approach towards MCD is essential to provide broader effective treatment options besides the general immunosuppressive agents with gruesome adverse effects.
  19. Ranjbarzadeh R, Jafarzadeh Ghoushchi S, Bendechache M, Amirabadi A, Ab Rahman MN, Baseri Saadi S, et al.
    Biomed Res Int, 2021;2021:5544742.
    PMID: 33954175 DOI: 10.1155/2021/5544742
    The COVID-19 pandemic is a global, national, and local public health concern which has caused a significant outbreak in all countries and regions for both males and females around the world. Automated detection of lung infections and their boundaries from medical images offers a great potential to augment the patient treatment healthcare strategies for tackling COVID-19 and its impacts. Detecting this disease from lung CT scan images is perhaps one of the fastest ways to diagnose patients. However, finding the presence of infected tissues and segment them from CT slices faces numerous challenges, including similar adjacent tissues, vague boundary, and erratic infections. To eliminate these obstacles, we propose a two-route convolutional neural network (CNN) by extracting global and local features for detecting and classifying COVID-19 infection from CT images. Each pixel from the image is classified into the normal and infected tissues. For improving the classification accuracy, we used two different strategies including fuzzy c-means clustering and local directional pattern (LDN) encoding methods to represent the input image differently. This allows us to find more complex pattern from the image. To overcome the overfitting problems due to small samples, an augmentation approach is utilized. The results demonstrated that the proposed framework achieved precision 96%, recall 97%, F score, average surface distance (ASD) of 2.8 ± 0.3 mm, and volume overlap error (VOE) of 5.6 ± 1.2%.
  20. Farook MS, Mahmoud O, Ibrahim MA, Berkathullah M
    Biomed Res Int, 2021;2021:6652250.
    PMID: 33628801 DOI: 10.1155/2021/6652250
    Objectives: To evaluate the in vitro effectiveness of desensitizing agents in reducing dentine permeability.

    Methods: The efficacy of desensitizing agents in reducing dentine permeability by occluding dentine tubules was evaluated using a fluid filtration device that conducts at 100 cmH2O (1.4 psi) pressure, and SEM/EDX analyses were evaluated and compared. Forty-two dentine discs (n = 42) of 1 ± 0.2 mm width were obtained from caries-free permanent human molars. Thirty dentine discs (n = 30) were randomly divided into 3 groups (n = 10): Group 1: 2.7% wt. monopotassium-monohydrogen oxalate (Mp-Mh oxalate), Group 2: RMGI XT VAR, and Group 3: LIQ SiO2. Dentine permeability was measured following treatment application after 10 minutes, storage in artificial saliva after 10 minutes and 7 days, and citric acid challenge for 3 minutes. Data were analysed with a repeated measures ANOVA test. Dentine discs (n = 12) were used for SEM/EDX analyses to acquire data on morphological changes on dentine surface and its mineral content after different stages of treatment.

    Results: Desensitizing agents' application on the demineralized dentine discs exhibited significant reduction of permeability compared to its maximum acid permeability values. Mp-Mh oxalate showed a significant reduction in dentine permeability (p < 0.05) when compared to RMGI XT VAR and LIQ SiO2. On SEM/EDX analysis, all the agents formed mineral precipitates that occluded the dentine tubules.

    Conclusions: 2.7% wt. monopotassium-monohydrogen oxalate was significantly effective in reducing dentine permeability compared to RMGI XT VAR and LIQ SiO2.

Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links