Displaying publications 1 - 20 of 92 in total

Abstract:
Sort:
  1. Saeed IM, Lee VS, Mazari SA, Si Ali B, Basirun WJ, Asghar A, et al.
    Chem Cent J, 2017;11:10.
    PMID: 28184241 DOI: 10.1186/s13065-016-0231-7
    Amine degradation is the main significant problems in amine-based post-combustion CO2 capture, causes foaming, increase in viscosity, corrosion, fouling as well as environmental issues. Therefore it is very important to develop the most efficient solvent with high thermal and chemical stability. This study investigated thermal degradation of aqueous 30% 2-aminoethylethanolamine (AEEA) using 316 stainless steel cylinders in the presence and absence of CO2 for 4 weeks. The degradation products were identified by gas chromatography mass spectrometry (GC/MS) and liquid chromatography-time-of-flight-mass spectrometry (LC-QTOF/MS). The results showed AEEA is stable in the absence of CO2, while in the presence of CO2 AEEA showed to be very unstable and numbers of degradation products were identified. 1-(2-Hydroxyethyl)-2-imidazolidinone (HEIA) was the most abundance degradation product. A possible mechanism for the thermal degradation of AEEA has been developed to explain the formation of degradation products. In addition, the reaction energy of formation of the most abundance degradation product HEIA was calculated using quantum mechanical calculation.
  2. Zamiri R, Abbastabar Ahangar H, Zakaria A, Zamiri G, Shabani M, Singh B, et al.
    Chem Cent J, 2015;9:28.
    PMID: 26089982 DOI: 10.1186/s13065-015-0099-y
    In this paper a template-free precipitation method was used as an easy and low cost way to synthesize Ag2S semiconductor nanoparticles. The Kramers-Kronig method (K-K) and classical dispersion theory was applied to calculate the optical constants of the prepared samples, such as the reflective index n(ω) and dielectric constant ε(ω) in Far-infrared regime.
  3. Cheong KW, Tan CP, Mirhosseini H, Joanne-Kam WY, Sheikh Abdul Hamid N, Osman A, et al.
    Chem Cent J, 2014;8:23.
    PMID: 24708894 DOI: 10.1186/1752-153X-8-23
    BACKGROUND: Perceptions of food products start when flavor compounds are released from foods, transported and appropriate senses in the oral and nose are triggered. However, the long-term stability of flavor compounds in food product has been a major concern in the food industry due to the complex interactions between key food ingredients (e.g., polysaccharides and proteins). Hence, this study was conducted to formulate emulsion-based beverage using natural food emulsifiers and to understand the interactions between emulsion compositions and flavor compounds.

    RESULTS: The influences of modified starch (x 1 ), whey protein isolate (x 2 ), soursop flavor oil (x 3 ) and deionized water (x 4 ) on the equilibrium headspace concentration of soursop volatile flavor compounds were evaluated using a four-component with constrained extreme vertices mixture design. The results indicated that the equilibrium headspace concentration of soursop flavor compounds were significantly (p 

  4. Salimon J, Abdullah BM, Yusop RM, Salih N
    Chem Cent J, 2014;8(1):16.
    PMID: 24612780 DOI: 10.1186/1752-153X-8-16
    Vegetable oils have different unique properties owing to their unique chemical structure. Vegetable oils have a greater ability to lubricate and have higher viscosity indices. Therefore, they are being more closely examined as base oil for biolubricants and functional fluids. In spite of their many advantages, vegetable oils suffer from two major drawbacks of inadequate oxidative stability and poor low-temperature properties, which hinder their utilization as biolubricant base oils. Transforming alkene groups in fatty acids to other stable functional groups could improve the oxidative stability, whereas reducing structural uniformity of the oil by attaching alkyl side chains could improve the low-temperature performance. In that light, the epoxidation of unsaturated fatty acids is very interesting as it can provide diverse side chains arising from the mono- or di-epoxidation of the unsaturated fatty acid. Oxirane ring opening by an acid-catalyzed reaction with a suitable reagent provides interesting polyfunctional compounds.
  5. Kumar S, Lim SM, Ramasamy K, Vasudevan M, Shah SAA, Selvaraj M, et al.
    Chem Cent J, 2017 Sep 18;11(1):89.
    PMID: 29086867 DOI: 10.1186/s13065-017-0322-0
    BACKGROUND: Heterocyclic pyrimidine nucleus, which is an essential base component of the genetic material of deoxyribonucleic acid, demonstrated various biological activities. A series of bis-pyrimidine Schiff bases were synthesized and screened for its antimicrobial and anticancer potentials. The molecular docking study was carried to find the interaction between active molecules with receptor.

    RESULTS: The structures of synthesized bis-pyrimidine Schiff bases were confirmed by spectral studies. The synthesized bis-pyrimidine derivatives were evaluated for their antimicrobial activity (MIC = µmol/mL) against selected Gram positive; Gram negative bacterial and fungal strains by tube dilution method. The anticancer activity (IC50 = µmol/mL) of the synthesized compounds was determined against human colorectal carcinoma (HCT116) cancer cell line by Sulforhodamine B (SRB) assay. Molecular docking studies provided information regarding the binding mode of active bis-pyrimidine Schiff bases with the cyclin-dependent kinase 8 (CDK8) receptor.

    CONCLUSIONS: The antimicrobial screening results indicated that compounds, q1 (MICbs = 0.83 µmol/mL), q16 (MICan = 1.54 µmol/mL and MICec = 0.77 µmol/mL), q1 and q19 (MICca = 0.41 µmol/mL) and q20 (MIC = 0.36 µmol/mL) are the most active ones. Compounds q1 (IC50 = 0.18 µmol/mL) have emerged as potent anticancer molecule against human colorectal carcinoma cancer cell line than the reference drug, 5-fluorouracil. Molecular docking studies indicated that compound q1 (the most active molecule) has the maximum hydrogen bond interaction (four) and π-π stacking (three) network among the bis-pyrimidine Schiff bases. Graphical abstract Graphical illustration of predicted binding mode of bis-pyrimidine Schiff bases in the active site of CDK8. a. Compound 1 (magenta color), b. Compound 5 (green color), c. Compound 8 (red color), d. Compound 13 (split pea color).

  6. Al-Azawi KF, Al-Baghdadi SB, Mohamed AZ, Al-Amiery AA, Abed TK, Mohammed SA, et al.
    Chem Cent J, 2016;10:23.
    PMID: 27134648 DOI: 10.1186/s13065-016-0170-3
    BACKGROUND: The acid corrosion inhibition process of mild steel in 1 M HCl by 4-[(2-amino-1, 3, 4-thiadiazol-5-yl)methoxy]coumarin (ATC), has been investigated using weight loss technique and scanning electron microscopy (SEM). ATC was synthesized, and its chemical structure was elucidated and confirmed using spectroscopic techniques (infrared and nuclear magnetic resonance spectroscopy).

    FINDINGS: The results indicated that inhibition efficiencies were enhanced with an increase in concentration of inhibitor and decreased with a rise in temperature. The adsorption equilibrium constant (K) and standard free energy of adsorption (ΔGads) were calculated. Quantum chemical parameters such as highest occupied molecular orbital energy, lowest unoccupied molecular orbital energy (EHOMO and ELUMO, respectively) and dipole moment (μ) were calculated and discussed. The results showed that the corrosion inhibition efficiency increased with an increase in both the EHOMO and μ values but with a decrease in the ELUMO value.

    CONCLUSIONS: Our research show that the synthesized macromolecule represents an excellent inhibitor for materials in acidic solutions. The efficiency of this macromolecule had maximum inhibition efficiency up to 96 % at 0.5 mM and diminishes with a higher temperature degree, which is revealing of chemical adsorption. An inhibitor molecule were absorbed by metal surface and follow Langmuir isotherms low and establishes an efficient macromolecule inhibitor having excellent inhibitive properties due to entity of S (sulfur) atom, N (nitrogen) atom and O (oxygen) atom.

  7. Yadav S, Narasimhan B, Lim SM, Ramasamy K, Vasudevan M, Shah SAA, et al.
    Chem Cent J, 2017 Dec 22;11(1):137.
    PMID: 29274036 DOI: 10.1186/s13065-017-0361-6
    BACKGROUND: A series of 2-(1H-benzo[d]imidazol-2-ylthio)-N-(substituted 4-oxothiazolidin-3-yl) acetamides was synthesized and characterized by physicochemical and spectral means. The synthesized compounds were evaluated for their in vitro antimicrobial activity against Staphylococcus aureus, Bacillus subtilis, Escherichia coli, Candida albicans and Aspergillus niger by tube dilution method. The in vitro cytotoxicity study of the compounds was carried out against human colorectal (HCT116) cell line. The most promising anticancer derivatives (5l, 5k, 5i and 5p) were further docked to study their binding efficacy to the active site of the cyclin-dependent kinase-8.

    RESULTS: All the compounds possessed significant antimicrobial activity with MIC in the range of 0.007 and 0.061 µM/ml. The cytotoxicity study revealed that almost all the derivatives were potent in inhibiting the growth of HCT116 cell line in comparison to the standard drug 5-fluorouracil. Compounds 5l and 5k (IC50 = 0.00005 and 0.00012 µM/ml, respectively) were highly cytotoxic towards HCT116 cell line in comparison to 5-fluorouracil (IC50 = 0.00615 µM/ml) taken as standard drug.

    CONCLUSION: The molecular docking studies of potent anticancer compounds 5l, 5k, 5i and 5p showed their putative binding mode and significant interactions with cyclin-dependent kinase-8 as prospective agents for treating colon cancer.

  8. Kashyap S, Kumar S, Ramasamy K, Lim SM, Shah SAA, Om H, et al.
    Chem Cent J, 2018 Nov 20;12(1):117.
    PMID: 30460466 DOI: 10.1186/s13065-018-0487-1
    BACKGROUND: The transition metal complexes formed from Schiff base is regarded as leading molecules in medicinal chemistry. Because of the preparative availability and diversity in the structure of central group, the transition metals are important in coordination chemistry. In the present work, we have designed and prepared Schiff base and its metal complexes (MC1-MC4) and screened them for antimicrobial, anticancer and corrosion inhibitory properties.

    METHODOLOGY: The synthesized metal complexes were characterized by physicochemical and spectral investigation (UV, IR, 1H and 13C-NMR) and were further evaluated for their antimicrobial (tube dilution) and anticancer (SRB assay) activities. In addition, the corrosion inhibition potential was determined by electrochemical impedance spectroscopy (EIS) technique.

    RESULTS AND DISCUSSION: Antimicrobial screening results found complexes (MC1-MC4) to exhibit less antibacterial activity against the tested bacterial species compared to ofloxacin while the complex MC1 exhibited greater antifungal activity than the fluconazole. The anticancer activity results found the synthesized Schiff base and its metal complexes to elicit poor cytotoxic activity than the standard drug (5-fluorouracil) against HCT116 cancer cell line. Metal complex MC2 showed more corrosion inhibition efficiency with high Rct values and low Cdl values.

    CONCLUSION: From the results, we can conclude that complexes MC1 and MC2 may be used as potent antimicrobial and anticorrosion agents, respectively.

  9. Bhawani SA, Sen TS, Ibrahim MNM
    Chem Cent J, 2018 Feb 21;12(1):19.
    PMID: 29468431 DOI: 10.1186/s13065-018-0392-7
    The molecularly imprinted polymers for gallic acid were synthesized by precipitation polymerization. During the process of synthesis a non-covalent approach was used for the interaction of template and monomer. In the polymerization process, gallic acid was used as a template, acrylic acid as a functional monomer, ethylene glycol dimethacrylate as a cross-linker and 2,2'-azobisisobutyronitrile as an initiator and acetonitrile as a solvent. The synthesized imprinted and non-imprinted polymer particles were characterized by using Fourier-transform infrared spectroscopy and scanning electron microscopy. The rebinding efficiency of synthesized polymer particles was evaluated by batch binding assay. The highly selective imprinted polymer for gallic acid was MIPI1 with a composition (molar ratio) of 1:4:20, template: monomer: cross-linker, respectively. The MIPI1 showed highest binding efficiency (79.50%) as compared to other imprinted and non-imprinted polymers. The highly selective imprinted polymers have successfully extracted about 80% of gallic acid from spiked urine sample.
  10. Mohsin SM, Hussein MZ, Sarijo SH, Fakurazi S, Arulselvan P, Hin TY
    Chem Cent J, 2013 Feb 06;7(1):26.
    PMID: 23383738 DOI: 10.1186/1752-153X-7-26
    BACKGROUND: Zinc layered hydroxide (ZLH) intercalated with cinnamate, an anionic form of cinnamic acid (CA), an efficient UVA and UVB absorber, have been synthesized by direct method using zinc oxide (ZnO) and cinnamic acid as the precursor.

    RESULTS: The resulting obtained intercalation compound, ZCA, showed a basal spacing of 23.9 Å as a result of cinnamate intercalated in a bilayer arrangement between the interlayer spaces of ZLH with estimated percentage loading of cinnamate of about 40.4 % w/w. The UV-vis absorption spectrum of the intercalation compound showed excellent UVA and UVB absorption ability. Retention of cinnamate in ZLH interlayers was tested against media usually came across with sunscreen usage to show low release over an extended period of time. MTT assay of the intercalation compound on human dermal fibroblast (HDF) cells showed cytotoxicity of ZCA to be concentration dependent and is overall less toxic than its precursor, ZnO.

    CONCLUSIONS: (Cinnamate-zinc layered hydroxide) intercalation compound is suitable to be used as a safe and effective sunscreen with long UV protection effect.

  11. Yadav S, Lim SM, Ramasamy K, Vasudevan M, Shah SAA, Mathur A, et al.
    Chem Cent J, 2018 May 26;12(1):66.
    PMID: 29804151 DOI: 10.1186/s13065-018-0432-3
    BACKGROUND: The study describes the synthesis, characterization, in vitro antimicrobial and anticancer evaluation of a series of 2-(1-benzoyl-1H-benzo[d]imidazol-2-ylthio)-N-substituted acetamide derivatives. The synthesized derivatives were also assessed for in vitro antitubercular activity against Mycobacterium tuberculosis H37Rv. The compounds found active in in vitro study were assessed for their in vivo antitubercular activity in mice models and for their inhibitory action on vital mycobacterial enzymes viz, isocitrate lyase, pantothenate synthetase and chorismate mutase.

    RESULTS: Compounds 8, 9 and 11 emerged out as excellent antimicrobial agents in antimicrobial assays when compared to standard antibacterial and antifungal drugs. The results of anticancer activity displayed that majority of the derivatives were less cytotoxic than standard drugs (tamoxifen and 5-fluorouracil) towards MCF7 and HCT116 cell lines. However, compound 2 (IC50 = 0.0047 µM/ml) and compound 10 (IC50 = 0.0058 µM/ml) showed highest cytotoxicity against MCF7 and HCT116 cell lines, respectively. The results of in vivo antitubercular activity revealed that a dose of 1.34 mg/kg was found to be safe for the synthesized compounds. The toxic dose of the compounds was 5.67 mg/kg while lethal dose varied from 1.81 to 3.17 mg/kg body weight of the mice. Compound 18 inhibited all the three mycobacterial enzymes to the highest level in comparison to the other synthesized derivatives but showed lesser inhibition as compared to streptomycin sulphate.

    CONCLUSIONS: A further research on most active synthesized compounds as lead molecules may result in discovery of novel anticancer and antitubercular agents.

  12. Ramimoghadam D, Hussein MZ, Taufiq-Yap YH
    Chem Cent J, 2013 Apr 20;7(1):71.
    PMID: 23601826 DOI: 10.1186/1752-153X-7-71
    BACKGROUND: A green approach to synthesize nanomaterials using biotemplates has been subjected to intense research due to several advantages. Palm olein as a biotemplate offers the benefits of eco-friendliness, low-cost and scale-up for large scale production. Therefore, the effect of palm olein on morphology and surface properties of ZnO nanostructures were investigated.

    RESULTS: The results indicate that palm olein as a biotemplate can be used to modify the shape and size of ZnO particles synthesized by hydrothermal method. Different morphology including flake-, flower- and three dimensional star-like structures were obtained. FTIR study indicated the reaction between carboxyl group of palm olein and zinc species had taken place. Specific surface area enhanced while no considerable change were observed in optical properties.

    CONCLUSION: Phase-pure ZnO particles were successfully synthesized using palm olein as soft biotemplating agent by hydrothermal method. The physico-chemical properties of the resulting ZnO particles can be tuned using the ratio of palm olein to Zn cation.

  13. Vashist N, Sambi SS, Narasimhan B, Kumar S, Lim SM, Shah SAA, et al.
    Chem Cent J, 2018 Dec 01;12(1):125.
    PMID: 30506405 DOI: 10.1186/s13065-018-0498-y
    BACKGROUND: A series of benzimidazole derivatives was developed and its chemical scaffolds were authenticated by NMR, IR, elemental analyses and physicochemical properties. The synthesized compounds were screened for their antimicrobial and antiproliferative activities.

    RESULTS AND DISCUSSION: The synthesized benzimidazole compounds were evaluated for their antimicrobial activity using the tube dilution method and were found to exhibit good antimicrobial potential against selected Gram negative and positive bacterial and fungal species. The compounds were also assessed for their anticancer activity exhibited using the SRB assay and were found to elicit antiproliferative activity against MCF7 breast cancer cell line, which was comparable to the standard drug.

    CONCLUSION: Antimicrobial screening results indicated that compounds 1, 2 and 19 to be promising antimicrobial agents against selected microbial species and comparable to standard drugs which included norfloxacin and fluconazole. The anticancer screening results revealed that compounds, 12, 21, 22 and 29 to show the highest activity against MCF7 and their IC50 values were more potent than 5-fluorouracil.

  14. Saifullah B, Hussein MZ, Hussein-Al-Ali SH, Arulselvan P, Fakurazi S
    Chem Cent J, 2013;7(1):72.
    PMID: 23601852 DOI: 10.1186/1752-153X-7-72
    Tuberculosis (TB), is caused by the bacteria, Mycobacterium tuberculosis and its a threat to humans since centuries. Depending on the type of TB, its treatment can last for 6-24 months which is a major cause for patients non-compliance and treatment failure. Many adverse effects are associated with the currently available TB medicines, and there has been no new anti-tuberculosis drug on the market for more than 50 year, as the drug development is very lengthy and budget consuming process.Development of the biocompatible nano drug delivery systems with the ability to minimize the side effects of the drugs, protection of the drug from enzymatic degradation. And most importantly the drug delivery systems which can deliver the drug at target site would increase the therapeutic efficacy. Nanovehicles with their tendency to release the drug in a sustained manner would result in the bioavalibilty of the drugs in the body for a longer period of time and this would reduce the dosing frequency in drug administration. The biocompatible nanovehicles with the properties like sustained release of drug of the target site, protection of the drug from physio-chemical degradation, reduction in dosing frequency, and prolong bioavailability of drug in the body would result in the shortening of the treatment duration. All of these factors would improve the patient compliance with chemotherapy of TB.
  15. Mohamad M, Ahmed R, Shaari A, Goumri-Said S
    Chem Cent J, 2017 Dec 02;11(1):125.
    PMID: 29198000 DOI: 10.1186/s13065-017-0352-7
    Theoretical simulations were designed by first principles approach of density functional theory to investigate the structural and optoelectronic properties of different structural classes of perylene; isolated perylene, diindeno[1,2,3-cd:1',2',3'-lm]perylene (DIP) molecule and DIP molecular crystal. The presence of molecular interactions in DIP crystal proved its structure-dependent behaviours. The herringbone molecular arrangement of DIP crystal has influenced the electronic properties by triggering the intermolecular interactions that reduced the energy gaps between HOMO and LUMO of the crystal. Strong hybridization resulting from dense charges population near zero Fermi energy has pushed valence band maxima in the density of states of all perylene structures to higher energies. Under small energy input, charges are transferred continuously as observed in the spectra of conductivity and dielectric. The existence of strong absorption intensities are consistent with the former works and supported by the obtained polarized reflectivity and loss spectra.
  16. Barakat A, Al-Majid AM, Soliman SM, Mabkhot YN, Ali M, Ghabbour HA, et al.
    Chem Cent J, 2015;9:35.
    PMID: 26106444 DOI: 10.1186/s13065-015-0112-5
    Chalcones (1,3-diaryl-2-propen-1-ones, represent an important subgroup of the polyphenolic family, which have shown a wide spectrum of medical and industrial application. Due to their redundancy in plants and ease of preparation, this category of molecules has inspired considerable attention for potential therapeutic uses. They are also effective in vivo as anti-tumor promoting, cell proliferating inhibitors and chemo preventing agents.
  17. M Zawawi SM, Yahya R, Hassan A, Mahmud HN, Daud MN
    Chem Cent J, 2013;7(1):80.
    PMID: 23634962 DOI: 10.1186/1752-153X-7-80
    Metal tungstates have attracted much attention due to their interesting structural and photoluminescence properties. Depending on the size of the bivalent cation present, the metal tungstates will adopt structures with different phases. In this work, three different phases of metal tungstates MWO4 (M= Ba, Ni and Bi) were synthesized via the sucrose templated method.
  18. Balavandy SK, Shameli K, Biak DR, Abidin ZZ
    Chem Cent J, 2014;8(1):11.
    PMID: 24524329 DOI: 10.1186/1752-153X-8-11
    This study aims to investigate the influence of different stirring time for synthesis of silver nanoparticles in glutathione (GSH) aqueous solution. The silver nanoparticles (Ag-NPs) were prepared by green synthesis method using GSH as reducing agent and stabilizer, under moderate temperature at different stirring times. Silver nitrate (AgNO3) was taken as the metal precursor while Ag-NPs were prepared in the over reaction time.
  19. Abdollahi Y, Zakaria A, Abdullah AH, Fard Masoumi HR, Jahangirian H, Shameli K, et al.
    Chem Cent J, 2012 Aug 21;6(1):88.
    PMID: 22909072 DOI: 10.1186/1752-153X-6-88
    The optimization processes of photo degradation are complicated and expensive when it is performed with traditional methods such as one variable at a time. In this research, the condition of ortho-cresol (o-cresol) photo degradation was optimized by using a semi empirical method. First of all, the experiments were designed with four effective factors including irradiation time, pH, photo catalyst's amount, o-cresol concentration and photo degradation % as response by response surface methodology (RSM). The RSM used central composite design (CCD) method consists of 30 runs to obtain the actual responses. The actual responses were fitted with the second order algebraic polynomial equation to select a model (suggested model). The suggested model was validated by a few numbers of excellent statistical evidences in analysis of variance (ANOVA). The used evidences include high F-value (143.12), very low P-value (<0.0001), non-significant lack of fit, the determination coefficient (R2 = 0.99) and the adequate precision (47.067). To visualize the optimum, the validated model simulated the condition of variables and response (photo degradation %) be using a few number of three dimensional plots (3D). To confirm the model, the optimums were performed in laboratory. The results of performed experiments were quite close to the predicted values. In conclusion, the study indicated that the model is successful to simulate the optimum condition of o-cresol photo degradation under visible-light irradiation by manganese doped ZnO nanoparticles.
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links