Displaying publications 1 - 20 of 80 in total

Abstract:
Sort:
  1. Kimani PK, Lim LW
    Environ Technol, 2024 Mar 15.
    PMID: 38488120 DOI: 10.1080/09593330.2024.2329918
    Polyaniline composites consisting of carboxymethyl cellulose (CMC) have enhanced adsorption properties, but recent studies indicate that the oxidised species - dialdehyde carboxymethyl cellulose (DCMC) - outperforms CMC-based composites. However, these studies fail to study the effect of DCMC's aldehyde content and compare the composites with CMC-based composites; numerous experiments required to investigate each adsorbent for each factor limit such studies. We explored a way to study whether villi-structured polyaniline (VSPANI), its CMC composite (CMC/PANI), and its DCMC composites with 35% (DCMC(A)/PANI) and 77% (DCMC(B)/PANI) aldehyde content would be great adsorbents for removing bisphenol-A (BPA). We first customised a D-optimal screening design to alleviate the pitfalls of definitive screening design (DSD), hence estimating all the main effects: initial concentration, pH, flow rate, adsorbent amount, sample volume and type of adsorbent. We excluded CMC/PANI and DCMC(A)/PANI composites, both with low adsorption capacities of 56.57 and 57.27 mg/g from further investigation. The DSD followed to estimate all second-order effects through which we projected a response surface method (RSM) to optimise and model the active factors. Increasing the aldehyde content on the composites favoured adsorption, but there lacked evidence to suggest VSPANI and DCMC(B)/PANI differed significantly in performance. The models were numerically and graphically proven adequate, explaining 80% and 99% of the variation when predicting removal efficiency and adsorption capacity. VSPANI showed potential as an adsorbent for BPA removal with 85% removal efficiency and 129 mg/g adsorption capacity. This comprehensive approach, combining both designs, allows for sustainable investigation of multiple adsorbents and factors, minimising experimental waste.
  2. Alsaleh M, Chen T, Abdul-Rahim AS
    Environ Technol, 2024 Mar;45(7):1271-1289.
    PMID: 36305514 DOI: 10.1080/09593330.2022.2141662
    This study's main goal is to evaluate how the research will look at the impact of geothermal energy production on the quality of the subterranean in the 27 European nations from 1990 to 2021. A considerable decline in the subterranean water supply can occur in EU14 emerging nations employing geothermal energy growth compared to EU13 emerging economies, according to research that uses the autoregressive distributed lag (ARDL). Fossil fuel use, population growth, and economic expansion are some factors that have a more detrimental effect on the subterranean water supply in EU14 emerging economies than in EU13 emerging nations. In contrast, the study's findings indicate that EU13 emerging nations may be better able to enhance their underground water supply than EU14 emerging economies because of more effective institutional qualities. The findings so indicate that increasing the amount of geothermal energy generation among the 27 European Union countries can accelerate subsurface water degradation at a high capacity and help achieve unionism's 2030 energy-related goals. When this is achieved, climate change will be put to check, as pollution of the environment. All calculations projected were seen to be of a good level of validity, and this is ascertained through three estimators considered in this study.
  3. Liew ZS, Ho YC, Lau WJ, Nordin NAHM, Lai SO, Ma J
    Environ Technol, 2024 Feb;45(6):1052-1065.
    PMID: 36250395 DOI: 10.1080/09593330.2022.2137435
    The scarcity of energy and water resources is a major challenge for humanity in the twenty-first century. Engineered osmosis (EO) technologies are extensively researched as a means of producing sustainable water and energy. This study focuses on the modification of substrate properties of thin film nanocomposite (TFN) membrane using aluminium oxide (Al2O3) nanoparticles and further evaluates the performance of resultant membranes for EO process. Different Al2O3 loading ranging from zero to 0.10 wt% was incorporated into the substrate and the results showed that the hydrophilicity of substrate was increased with contact angle reduced from 74.81° to 66.17° upon the Al2O3 incorporation. Furthermore, the addition of Al2O3 resulted in the formation of larger porous structure on the bottom part of substrate which reduced water transport resistance. Using the substrate modified by 0.02 wt% Al2O3, we could produce the TFN membrane that exhibited the highest water permeability (1.32 L/m2.h.bar, DI water as a feed solution at 15 bar), decent salt rejection (96.89%), low structural parameter (532.44 μm) and relatively good pressure withstandability (>25 bar).
  4. Rashid SN, Hizaddin HF, Hayyan A, Chan SE, Hasikin K, Razak SA, et al.
    Environ Technol, 2023 Nov 13.
    PMID: 37953730 DOI: 10.1080/09593330.2023.2283093
    Using natural deep eutectic solvents (NADESs) as a green reagent is a step toward producing environmentally friendly and sustainable technology. This study screened three natural DESs developed using quaternary ammonium salt and organic acid to analyse their capability to extract nickel ions from contaminated mangrove soil, which are ChCl: Acetic Acid (ChCl-AceA), ChCl: Levulinic Acid (ChCl-LevA), and ChCl: Ethylene Glycol(ChCl-Eg) at molar ratio 1:2. The impact of various operating parameters such as washing agent concentration, pH solution, and contact time on the NADES performance in the dissolution of Ni ions batch experiments were performed. The optimal soil washing conditions for metal removal were 30% and 15% concentration, a 1:5 soil-liquid ratio, and pH 2 of ChCl-LevA and ChCl-AceA, respectively. A single removal washing may remove 70.8% and 70.0% Ni ions from the contaminated soil. The dissolution kinetic of Ni ions extraction onto NADES was explained using the linear kinetic pseudo and intraparticle mass transfer diffusion models. The kinetic validation demonstrates a good fit between the experimental and pseudo-second-order Lagergren data. The model's maximum Ni dissolution capacity, Qe are 51.56 mg g-1 and 52.00 mg g-1 of ChCl-LevA and ChCl-AceA, respectively. The synthesised natural-based DES has the potential to be a cost-effective, efficient, green alternative extractant to conventional solvent extraction of heavy metals.
  5. Khan HW, Zailan AA, Bhaskar Reddy AV, Goto M, Moniruzzaman M
    Environ Technol, 2023 Jul 18.
    PMID: 37415504 DOI: 10.1080/09593330.2023.2234669
    In the present investigation, a total of 108 combinations of ionic liquids (ILs) were screened using the conductor-like screening model for real solvents (COSMO-RS) with the aid of six cations and eighteen anions for the extraction of succinic acid (SA) from aqueous streams through dispersive liquid-liquid microextraction (DLLME). Using the screened ILs, an ionic liquid-based DLLME (IL-DLLME) was developed to extract SA and the role of different reaction parameters in the effectiveness of IL-DLLME approach was investigated. COSMO-RS results suggested that, quaternary ammonium and choline cations form effective IL combinations with [OH¯], [F¯], and [SO42¯] anions due to hydrogen bonding. In view of these results, one of the screened ILs, tetramethylammonium hydroxide [TMAm][OH] was chosen as the extractant in IL-DLLME process and acetonitrile was adopted as the dispersive solvent. The highest SA removal efficiency of 97.8% was achieved using 25 μL of IL [TMAm][OH] as a carrier and 500 μL of acetonitrile as dispersive solvent. The highest amount of SA was extracted with a stir time of 20 min at 300 rpm, followed by centrifugation for 5 min at 4500 rpm. Overall, the findings showed that IL-DLLME is efficient in extracting succinic acid from aqueous environments while adhering to the first-order kinetics.
  6. Kamran HW, Rafiq M, Abudaqa A, Amin A
    Environ Technol, 2023 Jun 11.
    PMID: 37204776 DOI: 10.1080/09593330.2023.2216903
    ABSTRACTThis research examines the trends in environmental footprints through energy innovations, digital trade, economic freedom, and environmental regulation from the context of G7 economies. Quarterly observations from 1998-2020 have been utilized for the advanced-panel model entitled Method of Moments Quantile Regression (MMQR). The initial findings confirm slope heterogeneity, interdependence between the cross-sectional units, stationarity properties, and panel cointegration. The results through FM-OLS, D-OLS, and FE-OLS justify that energy innovations, digital trade, and environmental regulations control ecological damages. In contrast, economic freedom and growth are causing more damage to nature, like ecological footprints (EFP). Similarly, the results through MMQR confirm that the impact of energy innovations, digital trade, and environmental regulations is accepted as a panacea to control environmental degradation in G7. However, the magnitude of the coefficient varies across different quantiles. More specifically, the findings show that the impact of energy innovations is highly significant at 0.50th quantile. In contrast, through digital trade, the impact on EFP is only significant under medium and higher order quantiles (i.e. 0.50th, 0.75th-1.0th). Contrarily, economic freedom is causing more EFP across all the quantiles, where the findings are highly significant at 0.75th quantile. Besides, a few other policy implications are also discussed.
  7. Amin M, Yousuf M, Attaullah M, Ahmad N, Azra MN, Lateef M, et al.
    Environ Technol, 2023 Jun;44(14):2148-2156.
    PMID: 34962184 DOI: 10.1080/09593330.2021.2024276
    Organophosphates (OPs) and synthetic pyrethroids (SPs) are the most popular broad spectrum pesticides, used in agriculture as they have a strong pesticidal activity while also being biodegradable in the environment. The present study aimed to demonstrate the effects of these pesticides on the Acetylcholinesterase (AChE) activity in brain, gills and body muscles of Oreochromis niloticus - an important enzyme for the assessment and biomonitoring pollution caused by neurotoxins in the environment. The fish were exposed for 24 and 48 h to the LC0 concentrations of the malathion (1.425 mg/L), the chlorpyrifos (0.125 mg/L) and the λ-cyhalothrin (0.0039 mg/L), respectively. The activity of the AChE was significantly increased (p 
  8. Yasir HA, Zein SH, Holliday MC, Jabbar KJ, Ahmed U, Jalil AA
    Environ Technol, 2023 Apr 14.
    PMID: 37057364 DOI: 10.1080/09593330.2023.2202829
    AbstractIn this paper, the adsorption of the chlorinated organic compound, 2,4-dichlorophenol, using activated carbon (AC), bagasse fly ash (BFA) and rice husk fly ash (RHFA) in a packed bed column was simulated using Aspen Adsorption software. The purpose of this study was to demonstrate the effectiveness of simulation software for identifying alternative low-cost adsorbents and optimising the adsorption process. The effect of process parameters such as initial concentration, bed height and inlet feed flow rate were evaluated using breakthrough curves. It was shown that the longest breakthrough times were at a higher bed height of 3 m and lower flow rate of 2 m3/hr and concentration had no effect on breakthrough time. After optimisation using response surface methodology, the AC, BFA and RHFA had a breakthrough time of 534 s, 426 s and 209 s, respectively. This shows the potential of BFA as a potential alternative for AC for the adsorption of 2,4-dichlorophenol and shows RHFA to be a relatively poor adsorbent in comparison. The economic evaluation illustrates that the overall cost of wastewater treatment with BFA and RHFA is lower than AC. The cost for the BFA and RHFA adsorbents is only a handling charge, but the cost for using AC adsorbent is £10,603/year. Therefore, the company can produce 17,520 m3/year of fresh water from the adsorbent and save £87,600/year. Therefore, it was concluded that BFA had a slightly weaker adsorption efficiency than AC but was more cost effective, allowing it to be more affordable and increasing its availability.
  9. Said N, Lau WJ, Zainol Abidin MN, Mansourizadeh A, Ismail AF
    Environ Technol, 2023 Apr 09.
    PMID: 36976335 DOI: 10.1080/09593330.2023.2197127
    Membrane fouling during the filtration process is a perennial issue and could lead to reduced separation efficiency. In this work, poly(citric acid)-grafted graphene oxide (PGO) was incorporated into a matrix of single-layer hollow fibre (SLHF) and dual-layer hollow fibrr (DLHF) membranes, respectively, aiming to improve membrane antifouling properties during water treatment. Different loadings of PGO ranging from 0 to 1 wt% were first introduced into the SLHF to identify the best PGO loading for the DLHF preparation with its outer layer modified by nanomaterials. The findings showed that at the optimized PGO loading of 0.7 wt%, the resultant SLHF membrane could achieve higher water permeability and bovine serum albumin rejection compared to the neat SLHF membrane. This is due to the improved surface hydrophilicity and increased structural porosity upon incorporation of optimized PGO loading. When 0.7 wt% PGO was introduced only to the outer layer of DLHF, the cross-sectional matrix of the membrane was altered, forming microvoids and spongy-like structures (more porous). Nevertheless, the BSA rejection of the membrane was improved to 97.7% owing to an inner selectivity layer produced from a different dope solution (without the PGO). The DLHF membrane also demonstrated significantly higher antifouling properties than the neat SLHF membrane. Its flux recovery rate is 85%, i.e. 37% better than that of a neat membrane. By incorporating hydrophilic PGO into the membrane, the interaction of the hydrophobic foulants with the membrane surface is greatly reduced.
  10. Tang JY, Chung BYH, Ang JC, Chong JW, Tan RR, Aviso KB, et al.
    Environ Technol, 2023 Mar 29.
    PMID: 36927324 DOI: 10.1080/09593330.2023.2192877
    Biochar is a high-carbon-content organic compound that has potential applications in the field of energy storage and conversion. It can be produced from a variety of biomass feedstocks such as plant-based, animal-based, and municipal waste at different pyrolysis conditions. However, it is difficult to produce biochar on a large scale if the relationship between the type of biomass, operating conditions, and biochar properties is not understood well. Hence, the use of machine learning-based data analysis is necessary to find the relationship between biochar production parameters and feedstock properties with biochar energy properties. In this work, a rough set-based machine learning (RSML) approach has been applied to generate decision rules and classify biochar properties. The conditional attributes were biomass properties (volatile matter, fixed carbon, ash content, carbon, hydrogen, nitrogen, and oxygen) and pyrolysis conditions (operating temperature, heating rate residence time), while the decision attributes considered were yield, carbon content, and higher heating values. The rules generated were tested against a set of validation data and evaluated for their scientific coherency. Based on the decision rules generated, biomass with ash content of 11-14 wt%, volatile matter of 60-62 wt% and carbon content of 42-45.3 wt% can generate biochar with promising yield, carbon content and higher heating value via a pyrolysis process at an operating temperature of 425°C-475°C. This work provided the optimal biomass feedstock properties and pyrolysis conditions for biochar production with high mass and energy yield.
  11. Karen WMJ, Wong CY, Wang Z, Liew WYH, Melvin GJH
    Environ Technol, 2023 Jan;44(3):326-333.
    PMID: 34407722 DOI: 10.1080/09593330.2021.1970820
    This study demonstrated the generation of clean water from seawater collected at the beach coast in Universiti Malaysia Sabah, Malaysia, with carbonized rice husk coated melamine sponge as solar absorber by a solar still. Melamine sponge was utilized as a seawater transportation medium since its porous structure is excellent in channelling the seawater. Whereas carbonized rice husk was used as the photothermal conversion material for its efficient heat absorption due to its black colour and porous structure. Implementing air gap between the seawater body and solar absorber, and restricted water pathway assisted in localizing heat on the top surface of the solar absorber. Clean water was generated under direct solar radiation during the day at an open space with average solar intensity around 1.1∼1.2 kW/m2 (slightly higher than 1 sun) for about 4 h. Efficiency of the solar absorber was calculated, while the quality of the generated clean water was observed in terms of salinity and pH value. Insulated solar still with carbon-coated sponge showed the highest efficiency at about 54.74%. Salinity of the collected clean water significantly reduced to consumable level which was approximately 55 ppm, and the pH value at about 6.73 where it was within the safe limit of the drinkable water pH.
  12. Tang DYY, Chew KW, Chia SR, Ting HY, Sia YH, Gentili FG, et al.
    Environ Technol, 2022 Dec 19.
    PMID: 36536589 DOI: 10.1080/09593330.2022.2150094
    Overgrowth of microalgae will result in harmful algae blooms that can affect the aquatic ecosystem and human health. Therefore, the quantitation of chlorophyll pigments can be used as an indicator of algae bloom. However, it is difficult to monitor the geographical and temporal distribution of chlorophyll in the aquatic environment. Accordingly, an innovative and inexpensive method based on the red-green-blue (RGB) image analysis was utilized in this study to estimate the microalgae chlorophyll content. The digital images were acquired using a smartphone camera. The colour index was then evaluated using software and associated with chlorophyll concentration significantly. A regression model, using RGB colour components as independent variables to estimate chlorophyll concentration, was developed and validated. The Green in the RGB index was the most promising way to estimate chlorophyll concentration in microalgae. The result showed that acetone was the best extractant solvent with a high R-squared value among the four extractant solvents. Next, the isolation of useful biomolecules, such as proteins, fatty acids, polysaccharides and antioxidants from the microalgae, has been recognized as an alternative to regulating algae bloom. Microalgae are shown to produce bioactive compounds with a variety of biological activities that can be applied in various industries. This study evaluates the biochemical composition of mixed microalgae species, Desmodesmus sp. and Scenedesmus sp. using the liquid triphasic partitioning (TPP) system. The findings from analytical assays revealed that the biomass consisted of varied concentrations of carbohydrates, protein, and lipids. Phenolic compounds and antioxidant activity were at 60.22 mg/L and 90.69%, respectively.
  13. Ibrahim MD, Abakr YA, Gan S, Thangalazhy-Gopakumar S
    Environ Technol, 2022 Dec 19.
    PMID: 36476169 DOI: 10.1080/09593330.2022.2156817
    ABSTRACTThe current work focused on the intermediate pyrolysis of Bambara Groundnut Shells (BGS-G1), Sweet Sorghum Stalk (SSS), and Shea Nutshells (SNS). These feedstocks are readily available as wastes or by-products from industrial and agricultural activities. The thermo-gravimetric analysis of the biomass samples exhibited decomposition and devolatilization potentials in the temperature range of 110-650°C. The kinetic modelling resulted in the activation energy of BGS G1 being the lowest as 20.43 kJ/mol and SNS as the highest 24.89 kJ/mol among the three biomass samples. Intermediate pyrolysis was conducted in a vertical tube reactor at a temperature of 600°C, with nitrogen flow at 10 ml/min and heating rate ≥ 33.0℃/min. The yield of pyrolysis bio-oil was 38.0 ± 6.4, 44.2 ± 6, and 39.7 ± 5.2 wt.% for BGS-G1, SSS, and SNS, respectively. The HHV of bio-oil varied as 23.7 ± 1.8, 23.8 ± 1.8, to 26.5 ± 2.0 MJ/kg for BGS-G1 SSS and SNS respectively. The biochar recorded the lowest HHV for BGS-G1 as 18.8 ± 1.2 MJ/kg and the highest for SNS as 26.4 ± 1.8 MJ/kg. The FTIR of bio-oil revealed significant functional groups, and GC-MS (Gas Chromatography and Mass Spectrometry) analysis categorized the compounds in bio-oils as ketones, furans, phenolics, acids, phenols and benzene derivatives. The physicochemical analysis of the feedstocks and the products (bio-oil and biochar) showed their potential for bioenergy and biochemical (green chemicals) production.
  14. Ahmad T, Sethupathi S, Bashir MJK, Tan SY
    Environ Technol, 2022 Dec 12.
    PMID: 36428222 DOI: 10.1080/09593330.2022.2152735
    Oil palm fibre is a type of solid waste generated from palm oil processing plant. At present, there is no proper utilization of this abundant waste. Ammoniacal nitrogen (NH3-N) has received a lot of attention as a water pollutant due to its toxicity, which has an impact on both the environment and human health. In aquaculture wastewater (AQW), NH3-N is present in low concentrations (<10 ppm), and removing low concentrations of NH3-N is tedious. Thus, this study focuses on the potential of oil palm fibre biochar (OPFB) for sustainable low concentration NH3-N recovery from AQW and the recovered spent adsorbent to be used as a bio-fertilizer. The Physico-chemical properties of OPFB show a positive correlation with NH3-N recovery. A significant reduction of value-added metals in OPFB has confirmed the recovery of NH3-N through the ion exchange process. The adsorption isotherms and kinetics of NH3-N recovery had good correlation coefficients under the Freundlich and pseudo-second-order kinetic model confirming a multilayer heterogeneous and chemical adsorption respectively. Thermodynamic parameters indicated that the recovery process via adsorption was exothermic and had a Physio-chemical mechanism. At optimum conditions, OPFB could recover up to 66% of NH3-N actual AQW. The properties of spent OPFB showed potential reutilization as a soil amendment agent or biofertilizer which could be easily degraded.
  15. Bastami MS, Jones DL, Chadwick DR
    Environ Technol, 2021 Jun;42(16):2562-2572.
    PMID: 31868106 DOI: 10.1080/09593330.2019.1706644
    Slurry acidification has been shown to be effective in reducing environmentally damaging gases. However, this involved the use of concentrated acids on farms. Therefore, due to the health and safety concerns, there is an interest in self-acidification of slurry technique. This study was designed to determine the microbial dynamics leading to self-acidification of slurry. A fresh cattle slurry was amended 10% brewing sugar and stored over 30 days. This fermentable carbon source promoted self-acidification of the slurry from pH 7.0 to 4.7 within four days, and was associated with the accumulation of lactic acid and a reduction in methane and relative ammonia emissions. A metagenomics approach through next generation sequencing (NGS) using an Illumina MiSeq platform was used to determine the microbial diversity and dynamics (bacteria and archaea) in the stored amended slurry. 16S ribosomal ribonucleic acid (rRNA) sequence data revealed the presence of the Order of Lactobacillales was associated with the lactic acid production. The operational taxonomic units (OTUs) abundance indicates that the methanogenic community was dominated by hydrogenotrophic methanogens from the member Order of Methanobacteriales, Methanomicrobiales, and Methanosarcinales. The decrease in tolerance by the methanogens in the self-acidified slurry was probably the main reason for the reduced methane emission. These results confirm, at the microbial level, the mechanism of inhibiting methane production via self-acidification during storage period.
  16. Hassan H, Jin B, Dai S
    Environ Technol, 2021 Apr 01.
    PMID: 33749543 DOI: 10.1080/09593330.2021.1907451
    The interactions within microbial, chemical and electronic elements in microbial fuel cell (MFC) system can be crucial for its bio-electrochemical activities and overall performance. Therefore, this study explored polynomial models by response surface methodology (RSM) to better understand interactions among anode pH, cathode pH and inoculum size for optimising MFC system for generation of electricity and degradation of 2,4-dichlorophenol. A statistical central composite design by RSM was used to develop the quadratic model designs. The optimised parameters were determined and evaluated by statistical results and the best MFC systematic outcomes in terms of current generation and chlorophenol degradation. Statistical results revealed that the optimum current density of 106 mA/m2 could be achieved at anode pH 7.5, cathode pH 6.3-6.6 and 21-28% for inoculum size. Anode-cathode pHs interaction was found to positively influence the current generation through extracellular electron transfer mechanism. The phenolic degradation was found to have lower response using these three parameter interactions. Only inoculum size-cathode pH interaction appeared to be significant where the optimum predicted phenolic degradation could be attained at pH 7.6 for cathode pH and 29.6% for inoculum size.
  17. Lim YF, Chan YJ, Abakr YA, Sethu V, Selvarajoo A, Singh A, et al.
    Environ Technol, 2021 Feb 18.
    PMID: 33502966 DOI: 10.1080/09593330.2021.1882587
    As the population increases, energy demands continue to rise rapidly. In order to satisfy this increasing energy demand, biogas offers a potential alternative. Biogas is economically viable to be produced through anaerobic digestion (AD) from various biomass feedstocks that are readily available in Malaysia, such as food waste (FW), palm oil mill effluent (POME), garden waste (GW), landfill, sewage sludge (SS) and animal manure. This paper aims to determine the potential feedstocks for biogas production via AD based on their characteristics, methane yield, kinetic studies and economic analysis. POME and FW show the highest methane yield with biogas yields up to 0.50 L/g VS while the lowest is 0.12 L/g VS by landfill leachate. Kinetic study shows that modified Gompertz model fits most of the feedstock with R 2 up to 1 indicating that this model can be used for estimating treatment efficiencies of full-scale reactors and performing scale-up analysis. The economic analysis shows that POME has the shortest payback period (PBP), highest internal rate of return (IRR) and net present value (NPV). However, it has already been well explored, with 93% of biogas plants in Malaysia using POME as feedstock. The FW generation rate in Malaysia is approximately 15,000 tonnes per day, at the same time FW as the second place shows potential to have a PBP of 5.4 years and 13.3% IRR, which is close to the results achieved with POME. This makes FW suitable to be used as the feedstock for biogas production.
  18. Praveena SM, Rashid U, Rashid SA
    Environ Technol, 2020 Nov;41(25):3363-3374.
    PMID: 31002023 DOI: 10.1080/09593330.2019.1609590
    There is limited information on the optimal processes to remove heavy metals in greywater. A Response Surface Methodology (RSM) via the Box-Behnken Design (BBD) approach was applied in this study to investigate and optimise the process variables of activation time (1.5-2.5 h), impregnation ratio (0.25-0.75) and zinc chloride (ZnCl2) percentage (20-60%) for the removal of heavy metal ions (Cd, Cu, Pb and Ni) associated with greywater treatment. The quadratic model was chosen to describe the effects of the process variables (activation time, impregnation ratio, ZnCl2 percentage) on predicting the responses (heavy metal ions removal) with low p-values (
  19. Bomrungnok W, Arai T, Yoshihashi T, Sudesh K, Hatta T, Kosugi A
    Environ Technol, 2020 Nov;41(25):3318-3328.
    PMID: 30987543 DOI: 10.1080/09593330.2019.1608314
    Polyhydroxybutyrate (PHB) is a natural microbial polyester produced by a variety of bacteria and archaea from renewable resources. PHB resembles some petrochemical plastics but is completely biodegradable. It is desirable to identify suitable microbial strains and develop processes that can directly use starch from agricultural wastes without commercial amylase treatment. Here, PHB production using starch from agricultural waste was developed using a newly isolated strain, Bacillus aryabhattai T34-N4. This strain hydrolyzed cassava pulp and oil palm trunk starch and accumulated up to 17 wt% PHB of the cell dry weight. The α-amylase of this strain, AmyA, showed high activity in the presence of cassava pulp starch (69.72 U) and oil palm trunk starch (70.53 U). High expression of amyA was recorded in the presence of cassava pulp starch, whereas low expression was detected in the presence of glucose. These data suggest that starch saccharification by amyA allows strain T34-N4 to grow and directly produce PHB from waste starch materials such as cassava pulp and oil palm trunk starch, which may be used as low-cost substrates.
  20. Maniyam MN, Ibrahim AL, Cass AEG
    Environ Technol, 2020 Jan;41(1):71-85.
    PMID: 29923786 DOI: 10.1080/09593330.2018.1491634
    In the present study, locally isolated Rhodococcus strains were attempted as biological tools for methyl red removal, a mutagenic azo dye posing threat to the environment if left untreated. Rhodococcus strain UCC 0016 demonstrated superior methyl red-decolourizing activity of 100% after 24 h at static condition in comparison to Rhodococcus strain UCC 0008 which recorded 65% decolourization after 72 h. Optimization of physicochemical parameters at 30°C, pH 7 and supplementing glucose as the carbon source resulted in improved methyl red-decolourizing activity at static condition and reduced the time taken to achieve complete decolourization by 80%. Higher concentration of methyl red (5 g/L) was able to be decolourized completely within 10 h by adopting the technology of immobilization. The encapsulated cells of Rhodococcus strain UCC 0016 demonstrated higher substrate affinity (Km = 0.6995 g/L) and an accelerated rate of disappearance of methyl red (Vmax = 0.3203 g/L/h) compared to the free cells. Furthermore, the gellan gum beads could be reused up to nine batches without substantial loss in the catalytic activity indicating the economic importance of this protocol. Analysis of methyl red degradation products revealed no germination inhibition on Triticum aestivum and Vigna radiata demonstrating complete toxicity removal of the parent dye after biological treatment. The occurrence of new and altered peaks (UV-Vis and FTIR) further supported the notion that the removal of methyl red by Rhodococcus strain UCC 0016 was indeed through biodegradation. Therefore, this strain has a huge potential as a candidate for efficient bioremediation of wastewater containing methyl red.
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links