Displaying publications 1 - 20 of 54 in total

Abstract:
Sort:
  1. Reza F, Ibrahim NS
    Eur J Dent, 2015 2 26;9(1):74-79.
    PMID: 25713488 DOI: 10.4103/1305-7456.149646
    OBJECTIVE: Fiber post is cemented to a root canal to restore coronal tooth structure. This research aims to evaluate the effect of ultraviolet (UV) irradiation on bond strength of fiber post with resin cement.

    MATERIALS AND METHODS: A total of 40 of the two types of fiber posts, namely, FRC Prostec (FRC) and Fiber KOR (KOR), were used for the experiment. UV irradiation was applied on top of the fiber post surface for 0, 15, 20, and 30 min. The irradiated surface of the fiber posts (n = 5) were immediately bonded with resin cement (Rely X U200) after UV irradiation. Shear bond strength (SBS) MPa was measured, and the dislodged area of post surfaces was examined with scanning electron microscopes. Changes in surface roughness (Ra) of the FRC group after UV irradiation were observed (n = 3) using atomic force microscopy. Data of SBS were statistically analyzed using one-way analysis of variance, followed by multiple comparisons (P < 0.05).

    RESULTS: SBS was significantly higher for 20 min of UV irradiation of the FRC group while significantly higher SBS was observed with 15 min of UV irradiation of the KOR group. Resin cement was more evident (cohesive failure) on the dislodged post surface of the UV treated groups compared with the control. The surface roughness of the FRC post was Ra = 175.1 nm and Ra = 929.2 nm for the control and the 20 min group, respectively.

    CONCLUSIONS: Higher surface roughness of the UV irradiated group indicated formation of mechanical retention on the fiber post surface. Evidence of cohesive failure was observed which indicated higher SBS of fiber post with the UV irradiated group.

  2. Sridevi U, Jain A, Nagalaxmi V, Kumar UV, Goyal S
    Eur J Dent, 2015 10 3;9(3):364-372.
    PMID: 26430364 DOI: 10.4103/1305-7456.163238
    OBJECTIVE: The aim of the present study was to assess the expression of E-cad in oral precancerous lesions and conditions and oral carcinomas in comparison with normal mucosa.

    MATERIALS AND METHODS: Total of 50 samples were selected for the study and were categorized into five groups and 10 samples in each group as Group I-oral leukoplakia (OL), Group II-oral lichen planus (OLP), Group III-oral submucous fibrosis (OSMF), Group IV-oral squamous cell carcinoma (OSCC) and Group V-normal oral mucosa (NOM) as control group. All the samples were assessed for the expression of E-cad by immunohistochemical study.

    RESULTS: Upon assessing the expression of E-cad in OL, OSMF, OLP and OSCC, as majority of the samples with OSCC (90%), OL (80%), OLP (70%) and OSMF (60%) showed mild to moderate expression of E-cad staining, which was suggestive of reduction in dysplastic cells on comparison to NOM cells. This difference in expression and variation of E-cad upon comparison with normal mucosa was statistically significant (P < 0.001).

    CONCLUSION: There is significant (P < 0.001) variation of expression of E-cad with the histopathological dysplasia of the oral precancerous lesions and conditions, and the tumor differentiation of the oral cancers. However, there was no correlation of the degree of loss of expression of E-cad with the degree of dysplasia or the tumor differentiation of oral cancers. We conclude with our study that, there is a variation in the expression of E-cad but its value as a prognostic marker is questionable.

  3. Shahid F, Alam MK, Khamis MF
    Eur J Dent, 2016 4 21;10(2):176-182.
    PMID: 27095892 DOI: 10.4103/1305-7456.178299
    OBJECTIVE: Comprehensive diagnosis and treatment planning are essential in a successful orthodontic practice. The purpose of this study is to determine and compare intermaxillary tooth size discrepancy (IMTSD) using traditional digital caliper (DC) measurement on plaster dental models and stereomicroscopic digital dental models (SM).

    MATERIALS AND METHODS: The samples were randomly selected from different states of Pakistan. Total 7168 variables were measured on plaster dental casts (128) and SM digital dental models (128) according to the selection criteria. For IMTSD, the 6 variable measured as for anterior tooth size (maxilla, mandibular), overall tooth size (maxilla, mandibular), Bolton's anterior ratios (BAR), and Bolton's overall ratios (BOR). The independent t-test and ANOVA were used for statistical analyses.

    RESULTS: Significant sexual disparities in the sum of anterior tooth size and overall tooth size via DC and SM methods. No significant sexual disparities for BAR and BOR. No statistically significant differences were found in BAR and BOR between DC and SM. No significant differences were found on IMTSD ratio among different arch length and arch perimeters groups.

    CONCLUSIONS: Norms were developed based on DC and SM for IMTSD. Sexual disparities were observed in the sum of teeth size. However, no significant differences in BAR and BOR for IMTSD between the two methods.

  4. Shahid F, Alam MK, Khamis MF
    Eur J Dent, 2016 3 2;9(4):490-499.
    PMID: 26929686 DOI: 10.4103/1305-7456.172620
    OBJECTIVE: To investigate the maxillary and mandibular anterior crown width/height ratio and its relation to various arch perimeters, arch length, and arch width (intercanine, interpremolar, and intermolar) groups.

    MATERIALS AND METHODS: The calculated sample size was 128 subjects. The crown width/height, arch length, arch perimeter, and arch width of the maxilla and mandible were obtained via digital calliper (Mitutoyo, Japan). A total of 4325 variables were measured. The sex differences in the crown width and height were evaluated. Analysis of variance was applied to evaluate the differences between arch length, arch perimeter, and arch width groups.

    RESULTS: Males had significantly larger mean values for crown width and height than females (P ≤ 0.05) for maxillary and mandibular arches, both. There were no significant differences observed for the crown width/height ratio in various arch length, arch perimeter, and arch width (intercanine, interpremolar, and intermolar) groups (P ≤ 0.05) in maxilla and mandible, both.

    CONCLUSIONS: Our results indicate sexual disparities in the crown width and height. Crown width and height has no significant relation to various arch length, arch perimeter, and arch width groups of maxilla and mandible. Thus, it may be helpful for orthodontic and prosthodontic case investigations and comprehensive management.

  5. Modi R, Kohli S, Rajeshwari K, Bhatia S
    Eur J Dent, 2015 6 4;9(2):255-261.
    PMID: 26038660 DOI: 10.4103/1305-7456.156847
    OBJECTIVE: The aim of the study is to evaluate the stress distribution in tooth supported 5-unit fixed partial denture (FPD) having tooth as pier abutment using rigid and nonrigid connectors respectively, under simultaneous and progressive loading.

    MATERIAL AND METHODS: The three-dimensional (3D) finite element program (ANSYS software) was used to construct the mathematical model. Two 5-unit FPD'S were simulated, one with rigid connector and another one with nonrigid connector. For analysis, each of these models were subjected to axial and oblique forces under progressive loading (180, 180, 120, 120, 80 N force on first and second molars, premolars and canine respectively) and simultaneous loading (100, 100, 100, 100, 100 N force on first and second molars, premolars and canine respectively).

    RESULTS: The rigid and nonrigid connector design have effect on stress distribution in 5-unit FPDs with pier abutments.

    CONCLUSION: Oblique forces produce more stresses than vertical forces. Nonrigid connector resulted in decrease in stress at the level of prosthesis and increase in stress at the level of alveolar crest.

  6. Jamayet NB, Kirangi JK, Husein A, Alam MK
    Eur J Dent, 2017 4 25;11(1):130-134.
    PMID: 28435380 DOI: 10.4103/1305-7456.202636
    Enucleation and evisceration are the most common surgical procedures that are performed to manage tumor, trauma, and infection. Given the consequences of surgical intervention, the conditions of the remaining eye socket may affect future prosthetic rehabilitation. A custom-made ocular prosthesis can be used to help restore the esthetics and functional defects and to improve the quality of life of patients with such conditions. An assessment must be performed on the prosthetic outcome before rehabilitation. The etiology of defect, type of surgery, condition of the remaining socket, and patient's age should all be considered. This report discusses three different etiological eye defects that have undergone enucleation and evisceration and describes the factors that have a significant role in the esthetic and functional outcome of the prosthesis. This report should serve as a helpful aid for maxillofacial prosthodontists to understand the primary objective of rehabilitating each eye defect and to meet patient expectations.
  7. Sharma S, Parolia A, Kanagasingam S
    Eur J Dent, 2020 Dec;14(S 01):S159-S164.
    PMID: 33167046 DOI: 10.1055/s-0040-1718240
    In the light of coronavirus disease 2019 (COVID-19), dentistry is facing unprecedented challenges. The closure of clinics has impacted dental health professionals (DHPs) not only financially but also psychologically. In this review, these consequences are discussed in detail to highlight the challenges that DHPs are facing thus far, in both developing and developed nations. Compromised mental health among DHPs is an important area that requires attention during this difficult period. Although, in previous pandemics, dentists have not worked on the frontline, the article discusses how their wide range of skillsets can be leveraged if another wave of COVID-19 pandemic appears. Finally, guidelines to reopen clinics and patient management have been discussed in detail that could serve as a quick reference guide for DHPs.
  8. Bashir TF, Hassan S, Maqsood A, Khan ZA, Issrani R, Ahmed N, et al.
    Eur J Dent, 2020 Dec;14(S 01):S91-S96.
    PMID: 33368064 DOI: 10.1055/s-0040-1721653
    OBJECTIVE:  To evaluate the anxiety and depression amid novel coronavirus disease-19 (COVID-19) pandemic in health sciences students around the globe.

    MATERIALS AND METHODS:  This cross-sectional observational study comprised 523 health science students. A well-structured online questionnaire consisting of closed-ended questions based on student's general information, Patient Heath Questionnaire (PHQ)-9 and Generalized Anxiety Disorder (GAD)-7 scales were used to assess the psychological impact of COVID-19.

    STATISTICAL ANALYSIS:  SPSS-25 was used to analyze the outcome of this study. Multiple linear regression analysis test was used to assess variables which had impact on PHQ-9 and GAD-7 scores among the participants. A p-value of ≤ 0.05 was considered as statistically significant.

    RESULTS:  Among the 523 participants, 365 (69.55%) students were from developing countries and 158 (30.21%) from developed countries; 424 (81.1%) students were tested negative for COVID-19 and 99 (18.9%) had suffered from severe acute respiratory syndrome coronavirus 2 infection during pandemic. The mean GAD-7 and PHQ-9 scores were 7.16 ± 5.755 and 7.30 ± 6.166, respectively. Significant impact on anxiety levels was associated with age, gender, education status, and COVID-19 positive patient, while depression was not significantly associated with gender, COVID-19, and its reported symptoms in participants.

    CONCLUSION:  As the world is trying to contain the health effects of COVID-19, the psychological effects might take a longer time to be addressed. Our study highlights the dire need to identify mental well-being of health science students as this may have a direct impact on their professional commitments and future responsibilities.

  9. Lin GSS, Abdul Ghani NRN, Ismail NH, Singbal KP, Yusuff NMM
    Eur J Dent, 2020 Jul;14(3):448-455.
    PMID: 32599624 DOI: 10.1055/s-0040-1713951
    OBJECTIVES:  This study aimed to compare the polymerization shrinkage and degree of conversion of new zirconia-reinforced rice husk nanohybrid composite with commercialized microhybrid and nanofilled composites.

    MATERIALS AND METHODS:  Overall, 180 samples were used for polymerization shrinkage (buoyancy and optical methods) and degree of conversion tests in which they were divided into Group 1, nanofilled composite (Filtek-Z350- XT; 3M ESPE, St Paul, MN 55144-1000, USA), Group 2, microhybrid composite (Zmack-Comp), and Group 3, nanohybrid composite (Zr-Hybrid). Polymerization shrinkage test was performed using buoyancy and optical methods. For buoyancy method, samples were weighed in air and water to calculate the shrinkage value, whereas, for optical method, images of nonpolymerized samples were captured under a digital microscope and recaptured again after light-cured to calculate the percentage of shrinkage. Degree of conversion was tested using Fourier-transform infrared spectroscopy spectrometer.

    STATISTICAL ANALYSIS:  Data were analyzed using one-way analysis of variance complemented by post hoc Dunnett's T3 test for polymerization shrinkage and Tukey's honestly significant difference test for degree of conversion. Level of significance was set at p < 0.05.

    RESULTS:  Group 3 demonstrated similar polymerization shrinkage with Group 1, but lower shrinkage (p < 0.05) than Group 2 based on buoyancy method. However, optical method (p < 0.05) showed that Group 3 had the lowest shrinkage, followed by Group 1 and lastly Group 2. Besides, Group 3 showed a significantly higher degree of conversion (p < 0.05) than Group 1 and comparable conversion value with Group 2.

    CONCLUSIONS:  Zirconia-reinforced rice husk nanohybrid composite showed excellent shrinkage and conversion values, hence can be considered as an alternative to commercially available composite resins.

  10. Luthfi M, Oki AS, Indrawati R, Rifai M, Dachlan YP, Razak FA
    Eur J Dent, 2020 Jul;14(3):386-392.
    PMID: 32645730 DOI: 10.1055/s-0040-1713704
    OBJECTIVES:  To analyze CD35/CD89 expression ratio on the surface of neutrophils as an early detection marker for S-ECC.

    MATERIALS AND METHODS:  Saliva was collected from 4- to 6-year-old kindergarten students. Salivary neutrophils were obtained by instructing the subjects to rinse their mouth with 1 mL of sterile 1.5% NaCl for 30 seconds before expectorating it into a sterile glass. The expression of CFSE+CD35+ and CFSE+CD89+was measured and analyzed using flow cytometry.

    RESULTS: The expression of CFSE+CD89+ in the caries-free group (2.46 ± 0.39) was significantly lower than that in the S-ECC group (3.41 ± 1.11), with a p-value of 0.0001, while the expression of CFSE+CD35+ in the caries-free group was (2.35 ± 0.56) compared with (1.54 ± 0.35) (p = 0.0001) in the S-ECC group.

    CONCLUSIONS:  The expression ratio of CFSE+CD89+ and CFSE+CD35+constitutes a marker for S-ECC.

  11. Kamal A, Salman B, Razak NHA, Samsudin ABR
    Eur J Dent, 2020 Oct;14(4):613-620.
    PMID: 32777838 DOI: 10.1055/s-0040-1714765
    OBJECTIVE:  A dry socket is a well-recognized complication of wound healing following tooth extraction. Its etiology is poorly understood and commonly occur among healthy patients. As such, management strategies for dry socket has always been empirical rather than scientific with varying outcome. The aim of this study is to investigate the efficacy of concentrated growth factor (CGF) and low-level laser therapy (LLLT) and compared them to the conventional treatment in the management of dry socket.

    MATERIALS AND METHODS:  Sixty patients with one dry socket each, at University Dental Hospital Sharjah, were divided into three treatment groups based on their choice. In group I (n = 30), conventional treatment comprising of gentle socket curettage and saline irrigation was done. Group II (n = 15) dry sockets were treated with CGF and group III (n = 15) sockets were lased with LLLT. All dry socket patients were seen at day 0 for treatment and subsequently followed-up at 4, 7, 14, and 21 days. Pain score, perisocket inflammation, perisocket tenderness, and amount of granulation tissue formation were noted.

    STATISTICAL ANALYSIS:  Data were analyzed as mean values for each treatment group. Comparisons were made for statistical analysis within the group and among the three groups to rank the efficacy of treatment using one-way analysis of variance (ANOVA). Statistically significant difference is kept at p < 0.05.

    RESULTS:  Conventional treatment group I took more than 7 days to match the healing phase of group II CGF treated socket and group III LLLT irradiated socket (p = 0.001). When healing rate between CGF and LLLT are compared, LLLT group III showed a delay of 4 days compared with CGF in granulation tissue formation and pain control.

    CONCLUSION:  CGF treated socket was superior to LLLT in its ability to generate 75% granulation tissue and eliminate pain symptom by day 7 (p = 0.001).

  12. Lal A, Sanaullah A, M Saleem MK, Ahmed N, Maqsood A, Ahmed N
    Eur J Dent, 2020 Dec;14(S 01):S27-S33.
    PMID: 33242914 DOI: 10.1055/s-0040-1718644
    OBJECTIVES:  The aim of this study was to evaluate psychological distress caused by the novel coronavirus disease 2019 (COVID-19) pandemic among the adult population residing in Pakistan.

    MATERIALS AND METHODS:  This cross-sectional survey-based study comprised 1,000 adults residing in Pakistan. A questionnaire was formulated and circulated among adult population of Pakistan, the depression and anxiety symptoms using Patient Health Questionnaire-9 (PHQ-9) and Generalized Anxiety Disorder-7 (GAD-7) scales were assessed.

    STATISTICAL ANALYSIS:  Independent t-test, cross tabulation, and regression analysis were used to identify variables having impact on PHQ-9 and GAD-7 scores. A p-value of ≤ 0.05 was considered statistically significant.

    RESULTS:  Among 1,000 participants, 573 were males and 427 were females who completed the survey. Majority were restricted to home for more than 40 days. Considerable number of participants reported depressive (540, 54%) and anxiety (480, 48%) symptoms. Gender, age, earnings, and occupation have significant relation with psychological distress, although similar was not found with education levels.

    CONCLUSION:  Psychological distress, a concerning yet addressable issue was found among adults arising amid COVID-19 outbreak. Currently, physical health effects of COVID-19 are being looked, while mental health effects being under-addressed. This issue should be addressed to avoid any psychological impact in future.

  13. Huqh MZU, Hassan R, Rahman RA, Yusof A, Narmada IB, Ahmad WMAW
    Eur J Dent, 2021 Jul;15(3):523-532.
    PMID: 33622009 DOI: 10.1055/s-0040-1722483
    OBJECTIVES:  The purpose of this study was to evaluate the short-term effect of active skeletonized sutural distractor (ASSD) appliance on temporomandibular joint morphology of class III malocclusion subjects.

    MATERIALS AND METHODS:  This was a prospective interventional study. Cone-beam computerized tomography (CBCT) images of 22 patients were taken before and after treatment by using Planmeca Promax 3D CBCT machine version 2.9.2 (Planmeca OY Helsinki, Finland). The condylar width, height, length, roof of glenoid fossa thickness, and all joint spaces were measured. The condylar position was determined based on Pullinger and Hollander formula. The condylar shape was determined as per Kinzinger et al. The condylar volume was calculated by using Mimics software (Materialize, Belgium).

    STATISTICAL ANALYSIS:  Data analysis was performed by using SPSS software version 24. Wilcoxon paired signed-rank test was used to compare the difference in temporomandibular joint morphology and condylar volume between pre- and post-treatment measurements. Chi-square test was used to compare the condylar position and shape.

    RESULTS:  The superior (p = 0.000 on the right side, p = 0.005 on the left side) and posterior joint spaces (p = 0.000 on both sides) were decreased after the treatment, respectively. The condyles were rotated upward and backward, thereby increasing the anterior joint spaces (p = 0.000 on both sides) after the treatment. The condylar volume increases after treatment, but no significant differences were observed (p = 0.903 on the right side, p = 0.062 on the left side).

    CONCLUSION:  The significant changes were observed in joint spaces. The condyles were more anteriorly placed before treatment. Condylar position and shape alter in response to ASSD treatment. The condylar volume did not show any significant change.

  14. Haricharan PB, Voruganti S, Kotha A, Shivanna MM, Gandhi B, Suresh N
    Eur J Dent, 2021 Aug 25.
    PMID: 34433220 DOI: 10.1055/s-0041-1731925
    OBJECTIVES:  This clinical trial compared the efficacy of atraumatic restorative treatment (ART) sealants against resin-based sealants in terms of their retention and fissure caries preventive benefits over a period of 24 months among a section of school children in the Southern Indian state of Telangana.

    MATERIALS AND METHODS:  A split mouth clinical trial employed 198 children, who received these sealants on their lower permanent first molars. Retention was assessed 6 monthly and caries annually STATISTICAL ANALYSIS:  Chi-square tests were utilized to analyze the retention rate and the incidence of dental caries between the two groups. Kaplan-Meier survival analysis plotted the cumulative survival percentage of partially, and fully retained sealants and the survival of dentin carious free pits and fissures among both the groups. A linear binary logistical regression analysis calculated the odds ratio.

    RESULTS:  A statistical significant difference was observed in the retention rate between these sealants at every follow-up stage. The cumulative survival percentage of ART and resin sealants was calculated to be 30.9 and 37.5% by the end of 2 years. The Kaplan-Meier analysis showed no significant difference with regard to the survival of dentin carious free pits and fissures. The odds ratio for this trial was 0.747 (95% confidence interval: 0.493-1.13) CONCLUSION:  Resin sealants fared better than ART sealants in the field of retention. However, no significant differences were observed with regard to fissure caries prevention by the end of the study period.

  15. Othman NI, Ismail HU, Mohammad N, Ghazali N, Alauddin MS
    Eur J Dent, 2021 May;15(2):281-289.
    PMID: 33368068 DOI: 10.1055/s-0040-1721546
    OBJECTIVES:  The aim of this study was to investigate the current knowledge and attitude of deep caries removal method among dental students in Malaysia.

    MATERIALS AND METHODS:  A total of 303 students (n = 303) responded to the online questionnaire. The first part of questionnaire was to evaluate the demographic data of the respondents and focused on the technique and management approach used for deep caries lesion. The second part investigated the preferred treatment used for deep caries based on the designated clinical case, while the third part assessed the factors that affected the decision on deep caries management.

    STATISTICAL ANALYSIS:  Independent t-test was used to compare difference between the two groups.

    RESULTS:  Seventy four percent of the students have the knowledge of the different methods of caries removal, while 25.8% were only familiar with complete caries removal. The preferred method for deep caries removal in permanent teeth was partial caries removal (53%). For primary dentition, 45.6% of the students prefer to perform pulpotomy as compared with other techniques. There was no significant difference in caries removal method for permanent teeth between undergraduate year of study (p > 0.05), which was partial caries removal at 52.7 and 53.5%, respectively. For primary dentition, the preferred caries removal method was pulpotomy for year 4 (39.8%) and year 5 (52%) students. The popular material to restore deep caries was resin composite (42%) followed by glass ionomer cement (23.3%).

    CONCLUSIONS:  This study showed that partial caries removal was the preferred method despite partial understanding on the identification of the clinical indicators of the technique.

  16. Asif S, Ahmad B, Hamza SA, Taib H, Kassim NK, Zainuddin SLA
    Eur J Dent, 2021 Sep 27.
    PMID: 34571567 DOI: 10.1055/s-0041-1731930
    BACKGROUND: This study was aimed to determine the levels of salivary receptor activator of NF-κB ligand (RANKL) and osteoprotegerin (OPG) and its association with periodontal status among periodontitis patients.

    PATIENTS AND METHODS: A cross-sectional study was designed and performed at the Dental Clinic, Hospital Universiti Sains Malaysia (HUSM). Random sampling was employed to identify 88 participants into three groups: 30 mild periodontitis, 30 moderate to severe periodontitis, and 28 healthy (nonperiodontitis) patients. Periodontal parameters: periodontal pocket depth (PPD), clinical attachment level (CAL), plaque score (PS), and gingival bleeding index (GBI) were recorded. In total, 4 mL of unstimulated whole saliva was collected to determine the levels of salivary RANKL and OPG proteins by using ELISA technique. Data were analyzed by using SPSS software version 24.0.

    RESULTS: Mean values for PPD (5.3 ± 0.5) and CAL (5.6 ± 0.5) were observed higher for moderate to severe periodontitis as compared with values (4.4 ± 0.2) (4.5 ± 0.2) in mild periodontitis patients. The mean salivary RANKL and OPG was 0.23 ± 0.07 ng/mL and 1.78 ± 0.70 ng/mL respectively in moderate to severe periodontitis. Only salivary RANKL levels were significantly and positively correlated with all the clinical periodontal parameters.

    CONCLUSION: The levels of salivary RANKL were higher as opposed to lower OPG levels in periodontitis patients in contrast to healthy (nonperiodontitis) patients. RANKL levels were significantly associated with the periodontal parameters. Therefore, we can conclude that RANKL can potentially aid as an adjunctive diagnostic protein in evaluating periodontal disease.

  17. Kanniappan G, Hari P, Jujare RH
    Eur J Dent, 2021 Oct 01.
    PMID: 34598293 DOI: 10.1055/s-0041-1734469
    OBJECTIVE: The study aimed to compare the resin-dentin interface of sound and eroded dentin using universal and total-etch adhesive systems.

    MATERIAL AND METHODS: Forty caries-free extracted human premolars were collected, and the occlusal surfaces were ground by using slow speed diamond disc with copious water supply until a flat superficial dentin was exposed. The test group underwent erosive cycle (n = 20), and another group (n = 20) was reserved for control group. Erosive protocol consisted of immersion in 1.23% citric acid for 1 minute every 12 hours and stored in artificial saliva. Both the control and eroded teeth were further subdivided (n = 10) for composite restoration by using either self-etch or total-etch systems. Then the tooth samples were sectioned longitudinally and observed under confocal laser scanning microscope at ×10 magnification to evaluate resin tag length and hybrid layer thickness.

    STATISTICAL ANALYSIS: The data obtained were analyzed by using independent t-test.

    RESULTS: The highest mean value of the resin tag length and thickness of hybrid layer was observed with total-etch system in sound dentin group compared with other groups (p < 0.001).

    CONCLUSION: The resin-dentin interface of sound dentin was found to be better than eroded dentin by using total-etch system. The resin-dentin interface of eroded dentin was superior to sound dentin by using self-etch adhesive system.

  18. Rajeev V, Arunachalam R, Nayar S, Arunima PR, Ganapathy S, Vedam V
    Eur J Dent, 2017 4 25;11(1):58-63.
    PMID: 28435367 DOI: 10.4103/ejd.ejd_113_16
    OBJECTIVE: This in vitro study was designed to assess shear bond strength (SBS) of ormocer flowable (OF) resin as a luting agent, ormocer as an indirect veneer material with portrayal of modes of failures using scanning electron microscope (SEM).

    MATERIALS AND METHODS: Sixty maxillary central incisors were divided into Group I, II, and III with 20 samples each based on luting cement used. They were OF, self-adhesive (SA) cement, and total etch (TE) cement. These groups were subdivided into "a" and "b" of ten each based on the type of veneering materials used. Veneer discs were fabricated using Ormocer restorative (O) and pressable ceramic (C). Specimens were thermocycled and loaded under universal testing machine for SBS. The statistical analysis was done using one-way ANOVA post hoc Tukey honest significant difference method.

    RESULTS: A significant difference was observed between the Groups I and II (P < 0.05). The highest mean bond strength when using ormocer veneer was obtained with the Group Ia (19.11 ± 1.92 Mpa) and lowest by Group IIa (8.1 ± 1.04 Mpa), whereas the highest mean bond strength while using ceramic veneer was of similar range for Group Ib (18.04 ± 4.08 Mpa) and Group IIIb (18.07 ± 1.40 Mpa). SEM analysis revealed OF and TE presented mixed type of failure when compared with SA where failure mode was totally adhesive.

    CONCLUSION: OF was found equally efficient like TE. Bond strength of ormocer as a veneer was not inferior to ceramic making it one of the promising additions in the field of dentistry.

  19. Gopinath VK, Samsudin AR, Mohd Noor SNF, Mohamed Sharab HY
    Eur J Dent, 2017 4 25;11(1):76-82.
    PMID: 28435370 DOI: 10.4103/ejd.ejd_238_16
    OBJECTIVES: The aim of this study was to evaluate the vertical and sagittal facial profile and maxillary arch width, depth, and length of patients with unilateral cleft lip and palate (UCLP) and to compare them with healthy noncleft children in the mixed dentition stage (7-13 years).

    MATERIALS AND METHODS: This study is conducted at Hospital Universiti Sains Malaysia. UCLP group comprised 48 patients with nonsyndromic UCLP who have had the lip and palate repaired, whereas the control group comprised 48 healthy noncleft cases. The lateral cephalometrics measurements were used to determine the vertical height, sagittal depth of the face, and cranial base length and angle. Maxillary arch dimensions were measured on the study cast including arch width, depth, and length.

    RESULTS: Vertical facial height and sagittal depth measurements showed a significant decrease (P < 0.05) in the mean growth pattern in UCLP group. The anterior cranial base length (S-N) was shorter in UCLP children (P < 0.001), while Ba-N length had no significant difference (P = 0.639). Nasion-Sella Tursica-Basion angle was significantly higher in the UCLP group (P = 0.016). Dental arch width with reference to canine-to-canine and first premolar-to- first premolar distance was significantly larger in control (P = 0.001).

    CONCLUSION: Mean vertical and sagittal facial dimensions in the UCLP children who do not undergo orthodontic treatment are significantly lesser in all directions of growth than healthy noncleft children. The maxillary dental arch had a normal depth but constricted in width and arch length.

  20. Al-Ahmad BEM, Kashmoola MA, Mustafa NS, Hassan H, Arzmi MH
    Eur J Dent, 2018 4 17;12(1):120-122.
    PMID: 29657536 DOI: 10.4103/ejd.ejd_322_17
    Objective: This study aimed to investigate the relationship between tooth loss and the level of blood pressure with the hypothesis that tooth loss is associated with the increase of hypertension in postmenopausal women.

    Materials and Methods: Sixty postmenopausal female patients aged 51-68 years were included in the study to assess the relationship between tooth loss and the level of blood pressure. The information including sociodemographics, last menstruation period, hypertension history, and the duration of having tooth loss was recorded. Blood pressure was measured using sphygmomanometer and the number of tooth loss was determined.

    Results: The results showed a more significant tooth loss in hypertension (median: 23 + 4; interquartile range [IQR]: 6) compared to the normotension postmenopausal women (median: 18 + 6; IQR: 12; P < 0.05). Furthermore, obese patients had more tooth loss (median: 23 + 5; IQR: 8) than the overweight patients (median: 19 + 8; IQR: 8).

    Conclusion: Tooth loss is associated with the increase of hypertension in postmenopausal women which may have a role in the development of vascular diseases.

Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links