MATERIALS AND METHODS: This cross-sectional study included 113 T1DM children between 3 and 18 years old from the Universiti Teknologi MARA and the University of Malaya. Periodontal health parameters, including plaque index, gingival index, probing pocket depth, simplified basic periodontal examination, and clinical attachment loss, were recorded. Self-perceived periodontal health status was assessed with questionnaires.
STATISTICAL ANALYSIS: Statistical analysis was performed to evaluate the sensitivity of the questionnaire and the relationship between T1DM and periodontal parameters.
RESULTS: The median age was 11.4 years. Half of them (50.4%) were females. A total of 83.5% rated their oral condition as good, whereas 27.5% reported a history of gingival bleeding. Clinical examination revealed that 48.7% had healthy gingiva, whereas 47.8% had gingivitis. The question "Do you have bleeding when brushing, flossing, or eating food?" showed good accuracy in the evaluation of PD (p
MATERIALS AND METHODS: This cross-sectional observational study was conducted at Altamash Institute of Dental Medicine, Karachi from June 2020 to August 2020. A total of 775 patients participated to fill questionnaire. After scrutiny, 25 questionnaire forms were excluded due to incomplete information. Questionnaire was divided in to four sections. First section obtained patients sociodemographic information, while knowledge of patients regarding cross-infection control during COVID-19 pandemic was evaluated in second section. Similarly, the purpose of third section was to assess attitude and fourth section was designed to evaluate practice. Likert's 3-point scale was used for registration of participant's response. The reliability of questionnaire was assessed through Crohnbach's α (α = 0.74). Statistical analysis was performed after entering data in to SPSS version 25. Independent t-test was used to evaluate the difference in patients' knowledge, attitude, and practice. A p-value ≤ 0.05 was considered as statistically significant.
RESULTS: Majority of the participants agreed that COVID-19 is a highly contagious disease (631, 97%) and daily screening of staff, dental assistants, dentists, and patients is necessary (568, 75.7%) along with proper sterilization of instruments and disinfection of dental operatory (650, 86.66%). A large number of participant also agreed that proper disposal of waste is utmost important for cross-infection control (601, 80.24%) and patient's waiting area should also be marked with social distancing sign (620, 82.66%). However, when asked about the common route of COVID-19 transmission in dentistry, 341 (45.5%) participants disagreed that it is not through aerosol (water droplets) generated during dental procedures.
CONCLUSIONS: Dental health professionals should take additional measures to educate dental patients on mechanism of potential spread of COVID-19 through the aerosols and droplets generated during dental procedures. They should also encourage the dental patients to be vigilant and question the cross-infection control measures practiced by the dentist to whom they go for dental treatment, and to decrease their chances of acquiring an infection during their visit to the dental office.
MATERIALS AND METHODS: Formaldehyde-based protocol and glutaraldehyde-based protocol were compared to evaluate the quality of SEM images for stem cells cultured on hAM scaffold.
RESULTS: The results suggested that formaldehyde-based protocol is better than glutaraldehyde-based protocol in terms of showing clearer topography of the membrane as well as the boarders of the cells. To provide intact surface of the SEM sample and avoid possible ruptures of the hAM or the thin cell layer, it is recommended to perform the dehydration step using graded alcohol concentrations of 20%, 30%, 40%, 50%, 60%, 70%, 80%, and 90%, one time for each and twice in 100% for 10 min each. Gold sputter-coating step is not recommended as it does not improve the image quality.
CONCLUSIONS: To obtain clear SEM images, it is recommended to run a preliminary study to determine the better chemicals and conditions of sample preparation even when following preexisting protocols.
Materials and Methods: CBCT images which show MFPMs recorded in HUSM Dental Clinic between January 2015 and June 2016 was obtained and analyzed for their number of roots and canals. A total of 208 CBCT images of MFPMs were collected; 118 patients had unilateral molars and 90 patients had bilateral molars. The following observations were made: (1) root number; (2) number of canals per root; and (3) comparisons of number of roots and canals according to gender, ethnicity, and position.
Results: The majority of cases of bilateral MFPM had the same number of roots (95.6%, 95% confidence interval [CI]: 89.01%, 98.78%) on both the right and left side and only 4 cases (4.4%, 95% CI: 1.22%, 10.99%) had 3 roots on the right and 2 roots on the left sides. The majority of cases had the same number of canals on both sides (66.7%, 95% CI: 55.95, 76.26%) and 33.3% (95% CI: 23.74%, 44.05%) with unequal number of canals. The occurrence of the number of canals was not independent of the sides of the arch (P < 0.001) and there was statistically significantly greater proportion of cases who had greater number of canals on the right side than the left (P = 0.03). The prevalence of right single-rooted MFPM was very small at 0.3% (n = 1) in a Malay male (95% CI: 0.00, 1.83) and the most prevalent was two roots first molar (88.4%). The number of roots was not associated with sex or ethnic group (P > 0.05). The MFPM with a single root was found to have only one mesial canal. For two rooted MFPM, the most prevalent occurrence was two canals at the mesial and one canal at the distal roots (59%); followed by single canals in each mesial and distal (21%) and double canals per root (18%). Three roots MFPM have either single or double canals in the mesial root and double canals in the distal root.
Conclusions: The majority of population in the East Coast region of Malaysia has two roots and three root canals in their MFPMs. There was no difference in the number of roots between gender and ethnic and canals between ethnic.
MATERIALS AND METHODS: This was a prospective interventional study. Cone-beam computerized tomography (CBCT) images of 22 patients were taken before and after treatment by using Planmeca Promax 3D CBCT machine version 2.9.2 (Planmeca OY Helsinki, Finland). The condylar width, height, length, roof of glenoid fossa thickness, and all joint spaces were measured. The condylar position was determined based on Pullinger and Hollander formula. The condylar shape was determined as per Kinzinger et al. The condylar volume was calculated by using Mimics software (Materialize, Belgium).
STATISTICAL ANALYSIS: Data analysis was performed by using SPSS software version 24. Wilcoxon paired signed-rank test was used to compare the difference in temporomandibular joint morphology and condylar volume between pre- and post-treatment measurements. Chi-square test was used to compare the condylar position and shape.
RESULTS: The superior (p = 0.000 on the right side, p = 0.005 on the left side) and posterior joint spaces (p = 0.000 on both sides) were decreased after the treatment, respectively. The condyles were rotated upward and backward, thereby increasing the anterior joint spaces (p = 0.000 on both sides) after the treatment. The condylar volume increases after treatment, but no significant differences were observed (p = 0.903 on the right side, p = 0.062 on the left side).
CONCLUSION: The significant changes were observed in joint spaces. The condyles were more anteriorly placed before treatment. Condylar position and shape alter in response to ASSD treatment. The condylar volume did not show any significant change.
MATERIALS AND METHODS: Several electronic databases such as Google Scholar, PubMed, Science Direct, and Web of Science were systematically searched for studies published until July 2015.
RESULTS: EMG can be used in both diagnosis and treatment purpose to record neuromuscular activity. In dentistry, we can utilize EMG to evaluate muscular activity in function such as chewing and biting or parafunctional activities such as clenching and bruxism. In case of TMJ and myofascial pain disorders, EMG widely is used in the last few years.
CONCLUSIONS: EMG is one of biometric tests that occur in the modern evidence-based dentistry practice.
MATERIALS AND METHODS: A total of 303 students (n = 303) responded to the online questionnaire. The first part of questionnaire was to evaluate the demographic data of the respondents and focused on the technique and management approach used for deep caries lesion. The second part investigated the preferred treatment used for deep caries based on the designated clinical case, while the third part assessed the factors that affected the decision on deep caries management.
STATISTICAL ANALYSIS: Independent t-test was used to compare difference between the two groups.
RESULTS: Seventy four percent of the students have the knowledge of the different methods of caries removal, while 25.8% were only familiar with complete caries removal. The preferred method for deep caries removal in permanent teeth was partial caries removal (53%). For primary dentition, 45.6% of the students prefer to perform pulpotomy as compared with other techniques. There was no significant difference in caries removal method for permanent teeth between undergraduate year of study (p > 0.05), which was partial caries removal at 52.7 and 53.5%, respectively. For primary dentition, the preferred caries removal method was pulpotomy for year 4 (39.8%) and year 5 (52%) students. The popular material to restore deep caries was resin composite (42%) followed by glass ionomer cement (23.3%).
CONCLUSIONS: This study showed that partial caries removal was the preferred method despite partial understanding on the identification of the clinical indicators of the technique.
MATERIALS AND METHODS: This is a retrospective study, where the sample comprised of 188 Malaysian Malay subjects aged between 18 and 40 years and with different sagittal skeletal patterns. Overall, 71 males and 117 females were gathered for all size and shape analyses. This study incorporated 11 soft-tissue landmarks, which underwent landmark application using tpsDig2 software version 2.31, while the shape analysis was done using MorphoJ software version 1.07a.
STATISTICAL ANALYSIS: Statistical analyses were performed using IBM SPSS Statistics 26. The result of the analysis of variance (ANOVA) test showed significant differences in some of the parameters between the landmarks. Length D, Length E, Length F, Length H, and Length I showed significant differences (p 0.05).
RESULTS: The shape variation of soft-tissue landmarks in different skeletal patterns existed in 18 different dimensions which showed by 18 principal components (PCs). Procrustes ANOVA and canonical variate analysis showed the size and shape differences of soft-tissue patterns between Class II and III and gender groups (p
MATERIALS AND METHODS: This is an in vitro study using two extracted sound human mandibular molars. One tooth was prepared to receive the metal onlays and another one for the RNC onlays which were fabricated using the computer-aided design and computer-aided manufacturing (CAD/CAM) technology. Twelve metals and 12 ceramic onlays were fabricated before they were placed at their respective preparation and examined under the Leica stereomicroscope, M125C (Leica Microsystems, Wetzlar, Germany) for a marginal analysis. The gap width was measured at 10 predefined landmarks which included 3 points on the buccal and lingual surfaces each and 2 points each on the mesial and distal surfaces, respectively.
STATISTICAL ANALYSIS: Mann-Whitney post hoc test was used for statistical analysis (P ≤ 0.05).
RESULTS: Overall, the RNC onlays showed significant lower marginal gap with the exception of the landmarks 5 and 6 (on distolingual) and no significant difference at landmark 7 (on midlingual). It was observed that the marginal gap were all within the clinically acceptable limit of 120 μm.
CONCLUSIONS: Based on the results obtained, it can be concluded that the RNC CAD/CAM onlays are a promising alternative to the metal onlays.
Materials and Methods: Sixty postmenopausal female patients aged 51-68 years were included in the study to assess the relationship between tooth loss and the level of blood pressure. The information including sociodemographics, last menstruation period, hypertension history, and the duration of having tooth loss was recorded. Blood pressure was measured using sphygmomanometer and the number of tooth loss was determined.
Results: The results showed a more significant tooth loss in hypertension (median: 23 + 4; interquartile range [IQR]: 6) compared to the normotension postmenopausal women (median: 18 + 6; IQR: 12; P < 0.05). Furthermore, obese patients had more tooth loss (median: 23 + 5; IQR: 8) than the overweight patients (median: 19 + 8; IQR: 8).
Conclusion: Tooth loss is associated with the increase of hypertension in postmenopausal women which may have a role in the development of vascular diseases.
MATERIALS AND METHODS: Wistar rats were divided into three groups: T4 group (4-week cigarette smoke exposure), T8 group (8-week cigarette smoke exposure), and control group, which was not exposed to cigarette smoke. The oropharyngeal tissue of the rats from each group was examined histopathologically to count the number of apoptotic cells, and then the blood serum was made to measure the MDA level.
STATISTICAL ANALYSIS: Bonferroni test was performed to see the differences in each group for MDA level. While the data from tissue apoptosis were analyzed using Mann-Whitney U test for the significance. All data were considered significant if p < 0.05.
RESULTS: The MDA level and TA count increased as the duration of cigarette smoke exposure increased. In the T8 group, the MDA level and TA count were significantly higher compared with the T4 and control groups with a p-value
MATERIALS AND METHODS: Thirty Rattus norvegicus will be exposed to two kinds of cigarette smoke by a smoking pump for 4 and 8 weeks. The tongues were collected to analyze the number of macrophages, lymphocytes, and plasma cells with hematoxylin-eosin. The MMP-9 expression was similarly analyzed with immunohistochemical staining and then compared with the control group.
RESULTS: The number of macrophages, lymphocytes, and MMP-9 expression was higher in the 8-week cigarette smoke exposure compared to the 4-week cigarette smoke exposure and the control group (p < 0.000). The number of plasma cell did not differ in the 8-week cigarette smoke exposure from that of the control group (p > 0.05). The number of plasma cells in the tongue tissue during the 4-week cigarette smoke exposure was not determined.
CONCLUSION: Cigarette smoke exposure induces the risk of oral cancer development as a result of an increase in the number of macrophages, lymphocytes, and MMP-9 expression in the tongue epithelial.
MATERIALS AND METHODS: This cross-sectional observational study comprised 523 health science students. A well-structured online questionnaire consisting of closed-ended questions based on student's general information, Patient Heath Questionnaire (PHQ)-9 and Generalized Anxiety Disorder (GAD)-7 scales were used to assess the psychological impact of COVID-19.
STATISTICAL ANALYSIS: SPSS-25 was used to analyze the outcome of this study. Multiple linear regression analysis test was used to assess variables which had impact on PHQ-9 and GAD-7 scores among the participants. A p-value of ≤ 0.05 was considered as statistically significant.
RESULTS: Among the 523 participants, 365 (69.55%) students were from developing countries and 158 (30.21%) from developed countries; 424 (81.1%) students were tested negative for COVID-19 and 99 (18.9%) had suffered from severe acute respiratory syndrome coronavirus 2 infection during pandemic. The mean GAD-7 and PHQ-9 scores were 7.16 ± 5.755 and 7.30 ± 6.166, respectively. Significant impact on anxiety levels was associated with age, gender, education status, and COVID-19 positive patient, while depression was not significantly associated with gender, COVID-19, and its reported symptoms in participants.
CONCLUSION: As the world is trying to contain the health effects of COVID-19, the psychological effects might take a longer time to be addressed. Our study highlights the dire need to identify mental well-being of health science students as this may have a direct impact on their professional commitments and future responsibilities.
MATERIAL AND METHODS: The three-dimensional (3D) finite element program (ANSYS software) was used to construct the mathematical model. Two 5-unit FPD'S were simulated, one with rigid connector and another one with nonrigid connector. For analysis, each of these models were subjected to axial and oblique forces under progressive loading (180, 180, 120, 120, 80 N force on first and second molars, premolars and canine respectively) and simultaneous loading (100, 100, 100, 100, 100 N force on first and second molars, premolars and canine respectively).
RESULTS: The rigid and nonrigid connector design have effect on stress distribution in 5-unit FPDs with pier abutments.
CONCLUSION: Oblique forces produce more stresses than vertical forces. Nonrigid connector resulted in decrease in stress at the level of prosthesis and increase in stress at the level of alveolar crest.