Displaying publications 1 - 20 of 54 in total

Abstract:
Sort:
  1. Rajeev V, Arunachalam R, Nayar S, Arunima PR, Ganapathy S, Vedam V
    Eur J Dent, 2017 4 25;11(1):58-63.
    PMID: 28435367 DOI: 10.4103/ejd.ejd_113_16
    OBJECTIVE: This in vitro study was designed to assess shear bond strength (SBS) of ormocer flowable (OF) resin as a luting agent, ormocer as an indirect veneer material with portrayal of modes of failures using scanning electron microscope (SEM).

    MATERIALS AND METHODS: Sixty maxillary central incisors were divided into Group I, II, and III with 20 samples each based on luting cement used. They were OF, self-adhesive (SA) cement, and total etch (TE) cement. These groups were subdivided into "a" and "b" of ten each based on the type of veneering materials used. Veneer discs were fabricated using Ormocer restorative (O) and pressable ceramic (C). Specimens were thermocycled and loaded under universal testing machine for SBS. The statistical analysis was done using one-way ANOVA post hoc Tukey honest significant difference method.

    RESULTS: A significant difference was observed between the Groups I and II (P < 0.05). The highest mean bond strength when using ormocer veneer was obtained with the Group Ia (19.11 ± 1.92 Mpa) and lowest by Group IIa (8.1 ± 1.04 Mpa), whereas the highest mean bond strength while using ceramic veneer was of similar range for Group Ib (18.04 ± 4.08 Mpa) and Group IIIb (18.07 ± 1.40 Mpa). SEM analysis revealed OF and TE presented mixed type of failure when compared with SA where failure mode was totally adhesive.

    CONCLUSION: OF was found equally efficient like TE. Bond strength of ormocer as a veneer was not inferior to ceramic making it one of the promising additions in the field of dentistry.

  2. Kamal A, Salman B, Razak NHA, Samsudin ABR
    Eur J Dent, 2020 Oct;14(4):613-620.
    PMID: 32777838 DOI: 10.1055/s-0040-1714765
    OBJECTIVE:  A dry socket is a well-recognized complication of wound healing following tooth extraction. Its etiology is poorly understood and commonly occur among healthy patients. As such, management strategies for dry socket has always been empirical rather than scientific with varying outcome. The aim of this study is to investigate the efficacy of concentrated growth factor (CGF) and low-level laser therapy (LLLT) and compared them to the conventional treatment in the management of dry socket.

    MATERIALS AND METHODS:  Sixty patients with one dry socket each, at University Dental Hospital Sharjah, were divided into three treatment groups based on their choice. In group I (n = 30), conventional treatment comprising of gentle socket curettage and saline irrigation was done. Group II (n = 15) dry sockets were treated with CGF and group III (n = 15) sockets were lased with LLLT. All dry socket patients were seen at day 0 for treatment and subsequently followed-up at 4, 7, 14, and 21 days. Pain score, perisocket inflammation, perisocket tenderness, and amount of granulation tissue formation were noted.

    STATISTICAL ANALYSIS:  Data were analyzed as mean values for each treatment group. Comparisons were made for statistical analysis within the group and among the three groups to rank the efficacy of treatment using one-way analysis of variance (ANOVA). Statistically significant difference is kept at p < 0.05.

    RESULTS:  Conventional treatment group I took more than 7 days to match the healing phase of group II CGF treated socket and group III LLLT irradiated socket (p = 0.001). When healing rate between CGF and LLLT are compared, LLLT group III showed a delay of 4 days compared with CGF in granulation tissue formation and pain control.

    CONCLUSION:  CGF treated socket was superior to LLLT in its ability to generate 75% granulation tissue and eliminate pain symptom by day 7 (p = 0.001).

  3. Wan Ali WNS, Ahmad Tarmidzi NA
    Eur J Dent, 2021 Oct;15(4):798-801.
    PMID: 34384124 DOI: 10.1055/s-0041-1731584
    Impression compound has been introduced for more than 100 years. Since then, it has been widely used to obtain a preliminary impression of the edentulous arch. Although the use of impression compound has declined markedly over recent years as newer materials have become available, the cost-effectiveness and desirable physical and mechanical properties make this material indispensable in developing countries and teaching institutions. Its high viscosity characterizes impression compound as a mucocompressive impression material, which enables the full depth of the sulcus to be recorded for the retention of complete dentures. Literature reviews revealed that most contact allergies to impression materials are towards polyether, very few are towards alginate and polysulfide, and no reported cases have been found toward impression compound. This case report demonstrates a recent rare case of contact allergy towards impression compound during a routine impression taking for a fully edentulous arch in a 61-year-old woman. The patient developed symptoms of an allergic reaction, and the management of the condition was described.
  4. Mustafa NS, Kashmoola MA, Al-Ahmad BEM, Fansuri MABH, Jurimi NHM, Kashmoola S
    Eur J Dent, 2021 Nov 09.
    PMID: 34753187 DOI: 10.1055/s-0041-1735443
    OBJECTIVE: This study aimed to examine the etiological factors of orofacial pain for patients attending dental clinic at Faculty of Dentistry, International Islamic University Malaysia (IIUM).

    MATERIALS AND METHODS: This retrospective study examined the data of 248 patients who have attended dental clinic at Faculty of Dentistry IIUM and suffering from different types of orofacial pain. The data were collected from January 2010 to November 2018. The etiologies of pain were classified according to International Classification of Orofacial Pain, 1st edition (2020).

    STATISTICAL ANALYSIS: The association of age and gender with orofacial pain was evaluated by using the Chi-square test, and the significance level was set to 0.05.

    RESULTS: Collected data showed that orofacial pain has different etiologies among the patients attending the dental clinic at Faculty of Dentistry IIUM. Moreover, a statistically significant relation was observed between orofacial pain toward gender and different age group.

    CONCLUSION: The findings proposed that the orofacial pain has a variety of etiological factors with the highest percentage of orofacial pain attributed to disorders of dentoalveolar and anatomically related structures among patients attending dental clinic at Faculty of Dentistry IIUM.

  5. Sharma S, Parolia A, Kanagasingam S
    Eur J Dent, 2020 Dec;14(S 01):S159-S164.
    PMID: 33167046 DOI: 10.1055/s-0040-1718240
    In the light of coronavirus disease 2019 (COVID-19), dentistry is facing unprecedented challenges. The closure of clinics has impacted dental health professionals (DHPs) not only financially but also psychologically. In this review, these consequences are discussed in detail to highlight the challenges that DHPs are facing thus far, in both developing and developed nations. Compromised mental health among DHPs is an important area that requires attention during this difficult period. Although, in previous pandemics, dentists have not worked on the frontline, the article discusses how their wide range of skillsets can be leveraged if another wave of COVID-19 pandemic appears. Finally, guidelines to reopen clinics and patient management have been discussed in detail that could serve as a quick reference guide for DHPs.
  6. Jamayet NB, Kirangi JK, Husein A, Alam MK
    Eur J Dent, 2017 4 25;11(1):130-134.
    PMID: 28435380 DOI: 10.4103/1305-7456.202636
    Enucleation and evisceration are the most common surgical procedures that are performed to manage tumor, trauma, and infection. Given the consequences of surgical intervention, the conditions of the remaining eye socket may affect future prosthetic rehabilitation. A custom-made ocular prosthesis can be used to help restore the esthetics and functional defects and to improve the quality of life of patients with such conditions. An assessment must be performed on the prosthetic outcome before rehabilitation. The etiology of defect, type of surgery, condition of the remaining socket, and patient's age should all be considered. This report discusses three different etiological eye defects that have undergone enucleation and evisceration and describes the factors that have a significant role in the esthetic and functional outcome of the prosthesis. This report should serve as a helpful aid for maxillofacial prosthodontists to understand the primary objective of rehabilitating each eye defect and to meet patient expectations.
  7. Modi R, Kohli S, Rajeshwari K, Bhatia S
    Eur J Dent, 2015 6 4;9(2):255-261.
    PMID: 26038660 DOI: 10.4103/1305-7456.156847
    OBJECTIVE: The aim of the study is to evaluate the stress distribution in tooth supported 5-unit fixed partial denture (FPD) having tooth as pier abutment using rigid and nonrigid connectors respectively, under simultaneous and progressive loading.

    MATERIAL AND METHODS: The three-dimensional (3D) finite element program (ANSYS software) was used to construct the mathematical model. Two 5-unit FPD'S were simulated, one with rigid connector and another one with nonrigid connector. For analysis, each of these models were subjected to axial and oblique forces under progressive loading (180, 180, 120, 120, 80 N force on first and second molars, premolars and canine respectively) and simultaneous loading (100, 100, 100, 100, 100 N force on first and second molars, premolars and canine respectively).

    RESULTS: The rigid and nonrigid connector design have effect on stress distribution in 5-unit FPDs with pier abutments.

    CONCLUSION: Oblique forces produce more stresses than vertical forces. Nonrigid connector resulted in decrease in stress at the level of prosthesis and increase in stress at the level of alveolar crest.

  8. Haricharan PB, Voruganti S, Kotha A, Shivanna MM, Gandhi B, Suresh N
    Eur J Dent, 2021 Aug 25.
    PMID: 34433220 DOI: 10.1055/s-0041-1731925
    OBJECTIVES:  This clinical trial compared the efficacy of atraumatic restorative treatment (ART) sealants against resin-based sealants in terms of their retention and fissure caries preventive benefits over a period of 24 months among a section of school children in the Southern Indian state of Telangana.

    MATERIALS AND METHODS:  A split mouth clinical trial employed 198 children, who received these sealants on their lower permanent first molars. Retention was assessed 6 monthly and caries annually STATISTICAL ANALYSIS:  Chi-square tests were utilized to analyze the retention rate and the incidence of dental caries between the two groups. Kaplan-Meier survival analysis plotted the cumulative survival percentage of partially, and fully retained sealants and the survival of dentin carious free pits and fissures among both the groups. A linear binary logistical regression analysis calculated the odds ratio.

    RESULTS:  A statistical significant difference was observed in the retention rate between these sealants at every follow-up stage. The cumulative survival percentage of ART and resin sealants was calculated to be 30.9 and 37.5% by the end of 2 years. The Kaplan-Meier analysis showed no significant difference with regard to the survival of dentin carious free pits and fissures. The odds ratio for this trial was 0.747 (95% confidence interval: 0.493-1.13) CONCLUSION:  Resin sealants fared better than ART sealants in the field of retention. However, no significant differences were observed with regard to fissure caries prevention by the end of the study period.

  9. Othman NI, Ismail HU, Mohammad N, Ghazali N, Alauddin MS
    Eur J Dent, 2021 May;15(2):281-289.
    PMID: 33368068 DOI: 10.1055/s-0040-1721546
    OBJECTIVES:  The aim of this study was to investigate the current knowledge and attitude of deep caries removal method among dental students in Malaysia.

    MATERIALS AND METHODS:  A total of 303 students (n = 303) responded to the online questionnaire. The first part of questionnaire was to evaluate the demographic data of the respondents and focused on the technique and management approach used for deep caries lesion. The second part investigated the preferred treatment used for deep caries based on the designated clinical case, while the third part assessed the factors that affected the decision on deep caries management.

    STATISTICAL ANALYSIS:  Independent t-test was used to compare difference between the two groups.

    RESULTS:  Seventy four percent of the students have the knowledge of the different methods of caries removal, while 25.8% were only familiar with complete caries removal. The preferred method for deep caries removal in permanent teeth was partial caries removal (53%). For primary dentition, 45.6% of the students prefer to perform pulpotomy as compared with other techniques. There was no significant difference in caries removal method for permanent teeth between undergraduate year of study (p > 0.05), which was partial caries removal at 52.7 and 53.5%, respectively. For primary dentition, the preferred caries removal method was pulpotomy for year 4 (39.8%) and year 5 (52%) students. The popular material to restore deep caries was resin composite (42%) followed by glass ionomer cement (23.3%).

    CONCLUSIONS:  This study showed that partial caries removal was the preferred method despite partial understanding on the identification of the clinical indicators of the technique.

  10. Nugraha AP, Ardani IGAW, Sitalaksmi RM, Ramadhani NF, Rachmayanti D, Kumala D, et al.
    Eur J Dent, 2023 Jul;17(3):649-662.
    PMID: 36075265 DOI: 10.1055/s-0042-1750803
    OBJECTIVE:  This study was aimed to investigate RGCBE extract as antioxidant and anti-peri-implantitis bacteria through in vitro study and its potential as antioxidant, antibacterial, anti-inflammatory, antibone resorption, and proosteogenic through in silico study.

    MATERIALS: AND METHODS:  Absorption, distribution, metabolism, excretion and toxicity prediction, molecular docking simulation, and visualization of chlorogenic acid (CGA) and coumaric acid (CA) as anti-inflammatory, antioxidant, and antibacterial were investigated in silico. Inhibition zone by diffusion method, minimum inhibitory concentration (MIC), and minimum bactericidal concentration (MBC) of RGCBE extract against Aggregatibacter actinomycetemcomitans (Aa), Porphyromonas gingivalis (Pg), Fusobacterium nucleatum (Fn), and Prevotella intermedia (Pi) were done.

    STATISTICAL ANALYSIS: the analysis of variance (ANOVA) difference test, and the post-hoc Tukey's Honest Significant Different (HSD) with a different significance value of p<0.05 RESULTS:  GCA and CA compounds are good drug molecules and it has low toxicity. Chlorogenic acid have higher binding activity than coumaric acid to tumor necrosis factor (TNF)-α, nuclear factor (NF)-κB, receptor activation NF-κB (RANK) and its ligand (RANKL), interleukin (IL)-6, IL-10, runt related transcription factor (RUNX2), receptor activator nuclear Kappa beta Ligand-osteoprotegrin osteocalcin (RANKL-OPG), osteocalcin, nuclear factor associated T-cell 1 (NFATc1), tartate resistant acid phosphatase (TRAP), peptidoglycan, flagellin, dectin, Hsp70, and Hsp10 protein. RGCB ethanol extract has high antioxidant ability and it has MIC, MBC, and inhibit the growth of Aa, Pg, Fn, and Pi at 50% concentration with significantly different (p=0.0001 and<0.05).

    CONCLUSION:  RGCB ethanol extract has high antioxidant ability and 50% RGCB ethanol extract may act as strong anti-peri-implantitis bacteria in vitro. In addition, CGA in RGCB potential as antioxidant, antibacterial, anti-inflammatory, antibone resorption, and proosteogenic in silico.

  11. Nugraha AP, Sibero MT, Nugraha AP, Puspitaningrum MS, Rizqianti Y, Rahmadhani D, et al.
    Eur J Dent, 2023 Feb;17(1):46-56.
    PMID: 35453169 DOI: 10.1055/s-0041-1741374
    OBJECTIVE:  Mangrove (Aegiceras corniculatum) is an abundant natural marine resource of Indonesia, which can be explored for treating periodontal disease due to its potential as immunoregulatory, antibacterial, and antioxidant properties. The objective of this study was to investigate the active compound from Indonesian mangrove leaf extract (A. corniculatum) (MLE) for developing a herbal-based mouthwash through in silico and in vitro studies.

    MATERIALS AND METHODS:  Phytochemistry and liquid chromatography-high resolution mass spectrometry (LC-HRMS) were done to explore the active compounds in MLE. Chemistry screening and interaction, absorption, distribution, metabolism, and excretion (ADME), molecular docking simulation, and visualization of MLE active compounds as anti-inflammatory, antioxidant, and antibacterial were investigated in silico The inhibition zone of MLE against Aggregatibacter actinomycetemcomitans (Aa), Porphyromonas gingivalis (Pg), and Fusobacterium nucleatum (Fn) as periodontopathogenic bacterias was performed by diffusion method. Doxycycline 100 mg was used as a positive control, as a treatment group, there were five groups, namely 0%, 25%, 50%, 75%, and 100% MLE.

    RESULTS:  Alkaloid, saponin, flavonoid, triterpenoid, steroid, tannin, and quinone were detected in MLE. A high concentration of (-)epicatechin and coumaric acid (CA) were found in MLE. MLE in 100% concentration has the most effective ability to inhibit Fn, Pg, Aa growth in vitro. (-)-Epicatechin has a higher negative binding affinity than CA that can enhance heat shock protein (HSP)-30, HSP-70, HSP-90, interleukin-10, and FOXP3 and also inhibit interleukin-6, peptidoglycan, flagellin, and dectin in silico.

    CONCLUSION:  MLE of A. corniculatum has antioxidant, anti-inflammatory, and antibacterial activities that can be a potential raw material for developing a herbal-based mouthwash.

  12. Ahmed T, Rahman NA, Alam MK
    Eur J Dent, 2018 10 30;12(4):602-609.
    PMID: 30369810 DOI: 10.4103/ejd.ejd_22_18
    The aim of this study was to systematically review the available studies measuring the bond strength of orthodontic bracket-adhesive system under different experimental conditions in vivo. Literature search was performed in four different databases: PubMed, Web of Science, Cochrane, and Scopus using the keywords - bond strength, orthodontic brackets, bracket-adhesive, and in vivo. A total of six full-text articles were selected based on the inclusion and exclusion criteria of our study after a careful assessment by the two independent reviewers. Data selection was performed by following PRISMA 2009 guidelines. Five of the selected studies were clinical trials; one study was a randomized clinical trial. From each of the selected articles, the following data were extracted - number of samples, with the type of tooth involved materials under experiment methods of measurement, the time interval between bonding and debonding orthodontic brackets, mode of force application, and the bond strength results with the overall outcome. The methodological quality assessment of each article was done by the modified Downs and Black checklist method. The qualitative analyses were done by two independent reviewers. Conflicting issues were resolved in a consensus meeting by consulting the third reviewer (MKA). Meta-analysis could not be performed due to the lack of homogenous study results. The review reached no real conclusion apart from the lack of efforts to clinically evaluate the bonding efficiency of a wide range of orthodontic bracket-adhesive systems in terms of debonding force compared to laboratory-based in vitro and ex vivo studies.
  13. Mustafa NS, Kashmoola MA, Majeed KRA, Qader OAJA
    Eur J Dent, 2018 10 30;12(4):540-545.
    PMID: 30369800 DOI: 10.4103/ejd.ejd_377_17
    Objectives: The aim of this study is to determine the success rate of the endodontically treated teeth in patients attending the Polyclinic, Kulliyyah of Dentistry, International Islamic University Malaysia (IIUM), from 2012 to 2015.

    Materials and Methods: A retrospective study involved endodontically treated teeth of patients attending the Polyclinic, Kulliyyah of Dentistry, IIUM, from 2012 to 2015. Clinical and radiographic data were recorded and classified as successful or failed, and further analyzed by Fisher's exact test to measure the correlation between the variables using SPSS software version 16.0. Kappa test was used to measure the overall relationship between clinical and radiographic findings.

    Results: A total of sixty teeth were evaluated clinically and radiographically, the overall success rate was 85% (n = 51). Correlation between the variables showed nonsignificant (P > 0.05) in the success rate among age, gender, and race, upper and lower arches and between anterior and posterior teeth at the time of treatment. At postendodontic fixed restorations, the variables showed statistically significant relationship with the success rate (P < 0.05).

    Conclusions: Patients with no signs and symptoms and with no radiographical changes at the the time of clinical examination, showed the highest percentage of success rate (85%) of postendodontic fixed restorations. Age, gender, and race have no significant relations with the success rate of endodontically treated teeth.

  14. Ishak H, Field J, German M
    Eur J Dent, 2021 May;15(2):369-378.
    PMID: 33368070 DOI: 10.1055/s-0040-1721235
    The difficulty in obtaining human teeth that are caries-free that have similar environmental exposure, e.g., diet intake and water fluoridation has lead researchers to opt for bovine teeth as a substitute for erosion studies. Bovine mandibular incisors are readily available at abattoirs and often originate from the same region and are likely to consume similar dietary intake. The bovine teeth for erosion or abrasion studies usually undergo specimen preparation to produce a "flat surface" baseline specimen. Among other terms used to define baseline specimens for erosion and abrasion studies include phrases like "optically flat" and "flat and smooth surface." However, these terms might have no quantitative value as it does not justify the actual surface characteristics of the prepared flattened surface. In dentistry, roughness average (Ra) is the most commonly used parameter when reporting the roughness of specimens Reporting Ra alone might not be sufficient as it does not provide information regarding the surface texture as there is no distinction between valleys and peaks, nor does it provide information about the core structure of a material unlike the bearing area curve. The incorporation of Ra and BAP values in baseline specimens has the potential in predicting the wear or lubricating potential of these specimens. Furthermore, standardization of baseline specimens by acknowledging its surface roughness values ensures comparability of erosion and abrasion studies as different specimen preparation technique might influence the outcome or results of research.
  15. Luthfi M, Oki AS, Indrawati R, Rifai M, Dachlan YP, Razak FA
    Eur J Dent, 2020 Jul;14(3):386-392.
    PMID: 32645730 DOI: 10.1055/s-0040-1713704
    OBJECTIVES:  To analyze CD35/CD89 expression ratio on the surface of neutrophils as an early detection marker for S-ECC.

    MATERIALS AND METHODS:  Saliva was collected from 4- to 6-year-old kindergarten students. Salivary neutrophils were obtained by instructing the subjects to rinse their mouth with 1 mL of sterile 1.5% NaCl for 30 seconds before expectorating it into a sterile glass. The expression of CFSE+CD35+ and CFSE+CD89+was measured and analyzed using flow cytometry.

    RESULTS: The expression of CFSE+CD89+ in the caries-free group (2.46 ± 0.39) was significantly lower than that in the S-ECC group (3.41 ± 1.11), with a p-value of 0.0001, while the expression of CFSE+CD35+ in the caries-free group was (2.35 ± 0.56) compared with (1.54 ± 0.35) (p = 0.0001) in the S-ECC group.

    CONCLUSIONS:  The expression ratio of CFSE+CD89+ and CFSE+CD35+constitutes a marker for S-ECC.

  16. Ardani IGAW, Budipramana M, Rachmawati E, Nugraha AP, Ardana IKKG, Budhy TI, et al.
    Eur J Dent, 2023 Feb;17(1):183-190.
    PMID: 35672017 DOI: 10.1055/s-0042-1744371
    OBJECTIVE:  The aim of this article is to analyze and compare the presence of single-nucleotide polymorphisms (SNPs) of COL1A1 and FGFR2 in class II and class III Javanese populations.

    MATERIALS AND METHODS:  Cephalometric radiographs from total 63 patients of class II and III were analyzed. SNP analysis was performed based on both COL1A1 and FGFR2 sequences amplified from total DNA of patients' fresh blood. Principal component analysis was done to calculate the data and find the correlation of the cephalometric indicators influenced by each mutation. t-test and Mann-Whitney analysis were performed to check the significance of differences occurred in each studied parameter (p 

  17. Farook FF, Mohamed Nuzaim MN, Taha Ababneh K, Alshammari A, Alkadi L
    Eur J Dent, 2020 Dec;14(S 01):S165-S170.
    PMID: 33233004 DOI: 10.1055/s-0040-1718641
    The aim of this article is to shed light on coronavirus disease 2019 (COVID-19) and its oral effects and risk of nosocomial transmission to update the knowledge of dental health care workers. A thorough literature search of the PubMed/Embase/Web of Science/Cochrane central database was conducted to identify the impact of COVID-19 on oral health. We reviewed the recommendations on the recent guidelines set by the Centers for Disease Control and Prevention infection control practices for dentistry, American Dental Association, and the World Health Organization. According to the available evidence, COVID-19 may have a negative impact on the oral health due to the infection itself and due to various other consequences such as therapeutic measures, xerostomia, and other complications of the COVID-19. In light of the above facts, dentists should be wary of the disease, its identification, mode of spread and impacts on the oral health. The dental personnel have been identified as at the highest risk of getting COVID-19 due to cross infection from contact with their patients and aerosols generated in routine dental procedures. As such, they should be aware of the modifications that need to be made to the practice to prevent transmission of the disease. It is evident that COVID-19 has a negative impact on the oral health and at the same time a significant transmission risk to the dental personnel and patients who visit the clinic. If the recommendations issued by the regulatory authorities are meticulously followed, the risk of disease transmission can be lessened.
  18. Arshad AI, Ahmad P, Dummer PMH, Alam MK, Asif JA, Mahmood Z, et al.
    Eur J Dent, 2020 Feb;14(1):128-143.
    PMID: 32189321 DOI: 10.1055/s-0040-1703419
    OBJECTIVE:  A systematic search was performed for the identification and analysis of the 100 most often cited articles on dental caries and to highlight the changing trends in the field of dentistry over time.

    MATERIALS AND METHODS:  The search was performed without any restriction on the study design, publication year, or language using the Web of Science (WoS) group of Clarivate Analytics enabling the search through "All Databases." Based on the citation count as available in WoS, the articles were sorted in a descending manner. Information regarding each article was then extracted, which included its authorship, counts of citation (in other databases), citation density, current citation index (2019), publication year, country of publication, journal of article, evidence level based on study design, and keywords description.

    RESULTS:  The count of citation for each article varied in each database, that is, 175 to 2,003 in WoS, 89 to 1,981 in Scopus, and 126 to 3,492 when searched in Google Scholar. The highest number of articles (n = 10) related to dental caries were published in 2004. A total of 301 authors made valuable contributions to this field, out of which J.D. Featherstone had coauthored 6 articles. A significant negative correlation (p < 0.01) was found between the age of the article and the citation density (r =-0.545). However, a nonsignificant correlation (p = 0.952) occurred between the age of publication and the citation count (r = 0.006).

    CONCLUSION:  The results of this systematic review provide a critical appraisal of the context underpinning scientific developments in the field of dental caries and also highlighted trends in clinical management and research.

  19. Kanniappan G, Hari P, Jujare RH
    Eur J Dent, 2021 Oct 01.
    PMID: 34598293 DOI: 10.1055/s-0041-1734469
    OBJECTIVE: The study aimed to compare the resin-dentin interface of sound and eroded dentin using universal and total-etch adhesive systems.

    MATERIAL AND METHODS: Forty caries-free extracted human premolars were collected, and the occlusal surfaces were ground by using slow speed diamond disc with copious water supply until a flat superficial dentin was exposed. The test group underwent erosive cycle (n = 20), and another group (n = 20) was reserved for control group. Erosive protocol consisted of immersion in 1.23% citric acid for 1 minute every 12 hours and stored in artificial saliva. Both the control and eroded teeth were further subdivided (n = 10) for composite restoration by using either self-etch or total-etch systems. Then the tooth samples were sectioned longitudinally and observed under confocal laser scanning microscope at ×10 magnification to evaluate resin tag length and hybrid layer thickness.

    STATISTICAL ANALYSIS: The data obtained were analyzed by using independent t-test.

    RESULTS: The highest mean value of the resin tag length and thickness of hybrid layer was observed with total-etch system in sound dentin group compared with other groups (p < 0.001).

    CONCLUSION: The resin-dentin interface of sound dentin was found to be better than eroded dentin by using total-etch system. The resin-dentin interface of eroded dentin was superior to sound dentin by using self-etch adhesive system.

  20. Deng PU, Halim MS, Masudi SM, Al-Shehadat S, Ahmad B
    Eur J Dent, 2018 8 28;12(3):410-416.
    PMID: 30147408 DOI: 10.4103/ejd.ejd_82_18
    Objective: The aim of this study is to investigate the variations in the number of root and canal in the mandibular first permanent molars (MFPMs) teeth in East Coast Malaysian population using cone-beam computed tomography (CBCT).

    Materials and Methods: CBCT images which show MFPMs recorded in HUSM Dental Clinic between January 2015 and June 2016 was obtained and analyzed for their number of roots and canals. A total of 208 CBCT images of MFPMs were collected; 118 patients had unilateral molars and 90 patients had bilateral molars. The following observations were made: (1) root number; (2) number of canals per root; and (3) comparisons of number of roots and canals according to gender, ethnicity, and position.

    Results: The majority of cases of bilateral MFPM had the same number of roots (95.6%, 95% confidence interval [CI]: 89.01%, 98.78%) on both the right and left side and only 4 cases (4.4%, 95% CI: 1.22%, 10.99%) had 3 roots on the right and 2 roots on the left sides. The majority of cases had the same number of canals on both sides (66.7%, 95% CI: 55.95, 76.26%) and 33.3% (95% CI: 23.74%, 44.05%) with unequal number of canals. The occurrence of the number of canals was not independent of the sides of the arch (P < 0.001) and there was statistically significantly greater proportion of cases who had greater number of canals on the right side than the left (P = 0.03). The prevalence of right single-rooted MFPM was very small at 0.3% (n = 1) in a Malay male (95% CI: 0.00, 1.83) and the most prevalent was two roots first molar (88.4%). The number of roots was not associated with sex or ethnic group (P > 0.05). The MFPM with a single root was found to have only one mesial canal. For two rooted MFPM, the most prevalent occurrence was two canals at the mesial and one canal at the distal roots (59%); followed by single canals in each mesial and distal (21%) and double canals per root (18%). Three roots MFPM have either single or double canals in the mesial root and double canals in the distal root.

    Conclusions: The majority of population in the East Coast region of Malaysia has two roots and three root canals in their MFPMs. There was no difference in the number of roots between gender and ethnic and canals between ethnic.

Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links