Searching for green and ecofriendly solvents to replace classical solvents for industrial scale extraction of coconut oil is of great interest. To explore these possibilities, this study performed comprehensive comparative analyses of lipid profiles and phytosterol compositions in coconut oils obtained by extraction with n-hexane, absolute ethyl alcohol, deep eutectic solvent/n-hexane, dimethyl carbonate (DME) and cyclopentyl methyl ether (CPME) using a foodomics approach. Results indicated that CPME (64.23 g/100 g dry matter) and DME (65.64 g/100 g dry matter) showed comparable capacity for total lipid extraction of total lipids to classical solvents (63.5-65.66 g/100 g dry matter). Considering the phytosterol yield, CPME (644.26 mg/kg) exhibited higher selectivity than other solvents (535.64-622.13 mg/kg). No significant difference was observed in the fatty acid composition of coconut oil by the different solvents assayed. Additionally, total 468 lipid molecules were identified in the samples. For glycerolipid and sphingolipid, the five solvents showed comparable extraction capabilities. However, CPME exhibited higher extraction efficiency of polar lipids (glycerophospholipid and saccharolipid) than other solvents. Overall, these results may be a useful guide for the application of green solvents in industrial production of coconut oil.
Burkholderia cepacia (B. cepacia) is an aerobic Gram-negative bacillus found in various aquatic environments and can cause food contamination. We investigated the photodynamic antibacterial effects of food additive curcumin combined with EDTA on B. cepacia. We found a ~4-log reduction in B. cepacia viability when photo-irradiated with curcumin at 50 μM by blue LED light (16 mW/cm2) for 30 min with 0.4% (w/v) EDTA. Moreover, the bacterial morphological alterations and the leakage of intracellular contents were observed after photodynamic treatment. There were also obvious genomic DNA cleavage and a general loss of bacterial proteins assigned to large-scale protein degradation after photodynamic inactivation treatment. Collectively, curcumin in combination with EDTA illuminated by blue LED is a potential candidate for photodynamic inactivation of B. cepacia.
Kenaf (Hibiscus cannabinus L.) seed is a non-conventional edible oilseed that can be valorized into various food products. There is a recent discovery of kenaf seed beverage (KSB) potential as a novel plant-based beverage. KSB had less crude protein than soybean (SB)but more carbohydrate, magnesium, and phosphorus contents.Levels of crude fat, phytates, oxalates, total saponins, and lipid peroxidability in KSB were lower than SB. Sugar content between KSB and SB were comparable, while antioxidant properties of KSB were superior. Ultra-high performance liquid chromatography-mass spectrometry (UHPLC-MS) analysis detected gluconic acid, citric acid, palmitic acid, oleic acid, and 13-hydroxyoctadecadienoic acid in both KSB and SB. Considering its novelty, acute and subacute oral toxicity assessments in male Sprague Dawley rats were conducted. The acute toxicity assessment was performed at a single dose of 9.2 ml/kg body weight of KSB. In the following subacute toxicity assessment, different groups of rats consumed different doses of KSB (3.1, 6.1, and 9.2 ml/kg body weight) daily for 28 days. Rats presented normal behavioral and physiological states in both toxicity studies. Growth, food and water intakes, organ weight, and hematological parameters were unaffected. No mortality was reported. Several alterations in serum biochemical parameters were within the normal range, and unassociated with histopathological changes. The oral lethal dose (LD50) and the no-observed-adverse-effect-level (NOAEL) of KSB in rats was greater than 9.2 ml/kg (=1533 mg/kg) body weight. Interestingly, KSB exhibited comparable effects with soybean beverage (SB) on high-density lipoprotein cholesterol and triglycerides which worth further research Follow-up toxicity assessments in animals and human trials are also recommended to ascertain its long term safety.
Interesterification reaction involves rearrangement of the fatty acid radicals on the glycerol backbone, either randomly (chemical interesterification) or regioselectivity (enzymatic interesterification). Refined, bleached and deodourised palm oil (RBDPO) and palm kernel oil (RBDPKO) were blended in ratios from 25:75 to 75:25 (wt/wt). All blends were subjected to enzymatic (EI) and chemical interesterification (CI) using Lipozyme TL IM (4% w/w) and sodium methoxide (0.2% m/m) as the catalysts, respectively. The effect of EI and CI on the triacylglycerol (TAG) composition, thermal behaviour, polymorphism, crystal morphology and crystallisation kinetics were studied. The aim of this research is to characterise the nature of crystals in food product for certain desired structure. The crystallisation behaviour discussed in this study involves microstructure (PLM), polymorphism (XRD), thermal properties and crystallisation kinetics by DSC. The alteration in TAG composition was greater after CI as compared to EI with the reduction of LaLaLa (from 11.00% to 5.15%) and POO (from 14.28% to 4.87%). The DSC complete melting and crystallisation temperature of blend with 75% PO increased after CI, from 39.58 °C to 41.67 °C and from -30.84 °C to -28.33 °C, respectively. EI contributed to finer crystals than CI. However, the β' and β polymorph mixture and crystallisation kinetics (n = 2) of PO-PKO blends did not change after CI and EI. The knowledge on controlling crystallisation of RBDPO and RBDPKO blends is vital for proper processing condition like margarine production.
Species substitution, the use of a low value fish in place of a high value fish, is the biggest problem in international trade and the leading cause of fraud in the fisheries arena sector. Current DNA barcoding systems have partly solved this problem but also failed in many instances to amplify PCR targets from highly processed products because of the degradation of a longer barcode marker (~650bp). In the present study, a novel mini barcode marker (295bp) was developed to discriminate fish species in raw and processed states forms. The barcode primers were cross-tested against 33 fish species and 15 other animal species and found to be universal for all the tested fish varieties. When 20 commercial fish products of five different categories were screened, all commercial fish sample yielded positive bands for the novel fish barcode. PCR product was sequenced to retrieve the species IDs that reflected 55% (11/20) of Malaysian fish products were mislabeled.
Oil is one of three nutritious elements. The application of omics techniques in the field of oil science and technology is attracted increasing attention. Oilomics, which emerged as an important branch of foodomics, has been widely used in various aspects of oil science and technology. However, there are currently no articles systematically reviewing the application of oilomics. This paper aims to provide a critical overview of the advantages and value of oilomics technology compared to traditional techniques in various aspects of oil science and technology, including oil nutrition, oil processing, oil quality, safety, and traceability. Moreover, this article intends to review major issues in oilomics and give a comprehensive, critical overview of the current state of the art, future challenges and trends in oilomics, with a view to promoting the optimal application and development of oilomics technology in oil science and technology.
In this study the possibility of replacing current surfactants in chocolate formulations with natural lipids extracted from spinach leaf (SPLIP) or spinach chloroplast (CH.SPLIP) was evaluated. SPLIP and CH.SPLIP were extracted with chloroform/methanol following enzyme deactivation with hot isopropanol. Results showed a higher extraction yield for SPLIP while glycolipids were more concentrated in CH.SPLIP. Sugar/oil suspensions with dispersed volume fractions of 0.28, 0.33 and 0.37 containing 0.1% to 0.7% (w/w) surfactant (SPLIP, CH.SPLIP, lecithin and PGPR as commercial references) based on oil phase were prepared and analyzed in shear rheology. Apparent viscosity at 40 s-1 was significantly lower for the natural surfactants compared to lecithin at 0.5-0.7% (w/w) addition. With regard to yield stress, taken as the shear stress at 5 s-1, both natural surfactants showed comparable performance to PGPR at 0.3% to 0.7% addition. As SPLIP and CH.SPLIP behaved similar (p > 0.05), SPLIP, due to higher extraction yield, would be the preferred choice for application in chocolate matrices.
Adulteration of lard with other fats and oils in food production affects many areas including economics, religion, and health. Previous studies discriminated lard based on major components of fats, i.e. triglycerides and fatty acids. This study aimed to differentiate lard and other animal fats (beef, chicken and mutton fat) based on n-alkane profiles established by gas chromatography-mass spectrometry (GC-MS). Principal Component Analysis (PCA) and Hierarchical Clustering Analysis (HCA) were able to initiate clustering of lard and other animal fats. Good result was obtained using Random Forest (RF) and Partial Least Squares-Discriminant Analysis (PLS-DA). Statistical models propose tetracosane (C24) as a potential n-alkane marker and it was found that C24 was the major alkane with composition of 15.72% (GC-MS) of total alkanes identified. Based on this finding, more interesting study may potentially be explored for the interest of various fats and oils consumers in vast applications especially using chemometrics analysis.
Inflammation has been revealed to play a central role in the onset and progression of many illnesses. Nuclear magnetic resonance (NMR) based metabolomics method was adopted to evaluate the effects of Phoenix dactylifera seeds, in particular the Algerian date variety of Deglet on the metabolome of the LPS-IFN-γ-induced RAW 264.7 cells. Variations in the extracellular and intracellular profiles emphasized the differences in the presence of tyrosine, phenylalanine, alanine, proline, asparagine, isocitrate, inosine and lysine. Principal component analysis (PCA) revealed noticeable clustering patterns between the treated and induced RAW cells based on the metabolic profile of the extracellular metabolites. However, the effects of treatment on the intracellular metabolites appears to be less distinct as suggested by the PCA and heatmap analyses. A clear group segregation was observed for the intracellular metabolites from the treated and induced cells based on the orthogonal partial least squares-discriminant analysis (OPLS-DA) score plot. Likewise, 11 of the metabolites in the treated cells were significantly different from those in the induced groups, including amino acids and succinate. The enrichment analysis demonstrated that treatment with Deglet seed extracts interfered with the energy and of amino acids metabolism. Overall, the obtained data reinforced the possible application of Deglet seeds as a functional food with anti-inflammatory properties.
Edible bird's nest (EBN) is a precious food made from the solidified saliva of swiftlets. EBN from three types of origin, namely production, swiftlet species and geographical were characterised based on its nutritional composition, physicochemical properties and antioxidant properties. Proximate composition, total phenolic content (TPC) and antioxidant activities were determined following official methods, while mineral and heavy metal contents were obtained by respective atomic adsorption spectrometry (AAS) and inductively coupled plasma-mass spectrometry (ICP-MS). Amino acids profile and sialic acid were determined using high performance liquid chromatography (HPLC). Calcium and sodium were the major elements in EBN samples at averages of 17,267 mg/kg and 13,681 mg/kg, respectively. Despite protein contents were not significantly different; interestingly the total amino acids in A. fuciphagus EBN, 64.57 g/100 g was found to be 23% higher than in A. maximus EBN. EBN from house, A. fuciphagus and Peninsular Malaysia had greater antioxidant activities, 2.33-3.49 mg AAE/g and higher sialic acid, 13.57 g/100 g while those from cave, A. maximus and East Malaysia contained more minerals like calcium and magnesium. The 1, 1-diphenyl-2-picrylhydrazyl (DPPH) free radical scavenging activity and ferric ion reducing antioxidant power (FRAP) of house, A. fuciphagus and Peninsular Malaysia EBNs were approximately 2 times greater than the others. All samples were complied with the Malaysian Standard MS 2334:2011, except for mercury and nitrite. The overall findings suggest that the quality of EBN was varied following the production, species and geographical origins.
Vitamin E is one of the most important essential vitamins to support the regulation of oxidative stress in human body. Tocotrienols are part of the vitamin E family. The potentials of tocotrienols as nutraceutical ingredient are largely understated due to low oral bioavailability, which is a common problem associated with fat-soluble bioactive compounds. Nanoencapsulation technology offers innovative solutions to enhance the delivery mechanisms of these compounds. In this study, the effect of nanoencapsulation on the oral bioavailability and tissue distribution of tocotrienols were investigated using two types of formulations, i.e. nanovesicles (NV-T3) and solid lipid nanoparticles (NP-T3). At least 5-fold increment in maximum plasma concentrations, evident with dual-peak pharmacokinetic profiles, were observed after oral administration of nano-encapsulated tocotrienols. Plasma tocotrienol composition showed a shift from α-tocotrienol dominant in control group (Control-T3) to γ-tocotrienol dominant after nanoencapsulation. Tissue distribution of tocotrienols was found to be strongly influenced by the type of nanoformulation. Both nanovesicles (NV-T3) and nanoparticles (NP-T3) showed elevated accumulation in the kidneys and liver (5-fold) compared to control group while selectivity for α-tocotrienol was evident for NP-T3. In brain and liver of rats given NP-T3, α-tocotrienol emerged as the dominant congener (>80%). Acute oral administration of nanoencapsulated tocotrienols did not show signs of toxicity. The study concluded enhanced bioavailability and selective tissue accumulation of tocotrienol congeners when delivered via nanoencapsulation.
The rheological properties, microstructure, textural properties, colour and droplet size distribution of mayonnaise-like emulsion models prepared using 10-30wt.% of palm olein-based diacylglycerol (POL-DAG) oil were compared with those of the control (100wt.% VCO) model. There were significant (P<0.05) differences in the particle size distribution of the oil droplets, the textural properties, and the rheological properties of the various emulsion models. The rheological analysis included the determination of the flow curves, yield stress, thixotropy, apparent viscosity, and viscoelastic parameters. The concentrated oil-in-water (O/W) emulsion with 30wt.% POL-DAG substitution exhibited high thixotropy. The POL-DAG content had a substantial effect on the rheological properties of yield stress, storage modulus (G') and loss modulus (G″). The pseudoplastic behaviour of the emulsions was demonstrated. The size of the particles in the 30% POL-DAG-substituted emulsion was dramatically increased after one day and 30days of storage. All of the emulsion samples with POL-DAG substituted for VCO showed a relatively non-uniform bimodal droplet size distribution after one day of storage. In general, substitution of 10-20wt.% POL-DAG oil is appropriate for preparing O/W emulsions that had flow curves and textural properties similar to those of the control sample.
The detection of 3- and 2-MCPD ester and glycidyl ester was transformed from selected ion monitoring (SIM) mode to multiple reaction monitoring (MRM) mode by gas chromatography triple quadrupole spectrometry. The derivatization process was adapted from AOCS method Cd 29a-13. The results showed that the coefficient of determination (R2) of all detected compounds obtained from both detection mode was comparable, which falls between 0.997 and 0.999. The limit of detection and quantification (LOD and LOQ) were improved in MRM mode as compared to SIM mode. In MRM mode, the LOD of 3- and 2-MCPD ester was achieved 0.01 mg/kg while the LOQ was 0.05 mg/kg. Besides, LOD and LOQ of glycidyl ester were 0.024 and 0.06 mg/kg respectively. A blank spiked with MCPD esters (0.03, 0.10 and 0.50 mg/kg) and GE (0.06, 0.24 and 1.20 mg/kg) were chosen for repeatability and recovery tests. MRM mode showed better repeatability in area ratio and recovery with relative standard deviation (RSD %)
The aim of this study was to develop formulations to produce lycopene nanodispersions and to investigate the effects of the homogenization pressure on the physicochemical properties of the lycopene nanodispersion. The samples were prepared by using emulsification-evaporation technique. The best formulation was achieved by dispersing an organic phase (0.3% w/v lycopene dissolved in dichloromethane) in an aqueous phase (0.3% w/v Tween 20 dissolved in deionized water) at a ratio of 1:9 by using homogenization process. The increased level of homogenization pressure to 500bar reduced the particle size and lycopene concentration significantly (p<0.05). Excessive homogenization pressure (700-900bar) resulted in large particle sizes with high dispersibility. The zeta potential and turbidity of the lycopene nanodispersion were significantly influenced by the homogenization pressure. The results from this study provided useful information for producing small-sized lycopene nanodispersions with a narrow PDI and good stability for application in beverage products.
Fish oil-in-water emulsions containing fish oil, thiol-modified β-lactoglobulin (β-LG) fibrils, chitosan and maltodextrin were fabricated using a high-energy method. The results showed that chitosan coating induced charge reversal; denoting successful biopolymers complexation. A significantly (p<0.05) larger droplet size and lower polydispersity index value, attributed to the thicker chitosan coating at the oil-water interface, were observed. At high chitosan concentrations, the cationic nature of chitosan strengthened the electrostatic repulsion between the droplets, thus conferring high oxidative stability and low turbidity loss rate to the emulsions. The apparent viscosity of emulsions stabilized using thiol-modified β-LG fibrils-chitosan complex was higher than those stabilized using β-LG fibrils alone, resulting in the former's higher creaming stability. Under thermal treatments (63°C and 100°C), emulsions stabilized using thiol-modified β-LG fibrils-chitosan complex possessed higher heat stability as indicated by the consistent droplet sizes observed. Chitosan provided a thicker protective layer that protected the oil droplets against high temperature. Bridging flocculation occurred at low chitosan concentration (0.1%, w/w), as revealed through microscopic observations which indicated the presence of large flocs. All in all, this work provided us with a better understanding of the application of protein fibrils-polysaccharide complex to produce stable emulsion.
Diacylglycerol (DAG) is commonly known as one of the precursors for 3-monochloropropane-1,2-diol esters (3-MCPDE) and glycidyl esters (GE) formation. Besides, 3-MCPDE and GE are heat-induced contaminants which can be formed in fat-containing baked products during the baking process. This study attempted to replace the conventional palm-based shortening (SH) with a healthier fat, namely soybean oil-based diacylglycerol stearin (SDAG) in producing biscuits. The effects of different baking temperatures (200, 210 and 220 °C) and SDAG:SH fat blend ratios (0:100, 60:40 (D64S), 80:20 (D82S), 100:0, w/w) towards the biscuits' physical properties were evaluated. Moreover, the oxidative stability, 3-MCPDPE and GE formation in the fats extracted from the biscuits were also investigated. SDAG-produced biscuit showed slight reductions in the spread ratio compared to the SH-produced biscuit. The elevated baking temperatures resulted in biscuits with increased hardness and low moisture content. Pure SDAG and the other fat blends exhibited significant (p
Zingiber officinale Roscoe is an excellent source of bioactive compounds, mainly gingerols and shogaols compounds, that associated with various bioactivities including antioxidant, anticancer, anti-inflammatory, antimicrobial, and antibiofilm. Zingiber officinale Roscoe found its application in the food, pharmaceutical, and cosmeceutical industries. The demand for a high quality of ginger oleoresin extracts based on the contents of gingerols and shogaols compounds for a health-benefit has dramatically increased. Various extraction techniques, including the conventional and advanced extraction techniques for gingerols and shogaols have been reported based on the literature data from 2012 to 2022. The present review examines the functional composition and bioactivities of Zingiber officinale Roscoe and the advanced green extraction technologies. Some variations in the quantity and quality of gingerols and shogaols compounds are because of the extraction method employed. This review provides a depth discussion of the various green advanced extraction technologies and the influences of process variables on the performance of the extraction process. Lower temperature with a short exposure time such as ultrasound-assisted and enzyme-assisted extraction, will lead to high quality of extracts with high content of 6-gingerol. High thermal processing, such as microwave-assisted and pressurized liquid extraction, will produce higher 6-shogaol. Meanwhile, supercritical fluid extraction promotes high quality and the safety of extracts by using non-toxic CO2. In addition, challenges and future prospects of the extraction of ginger oleoresin have been identified and discussed. The emerging green extraction methods and technologies show promising results with less energy input and higher quality extracts than conventional extraction methods.
A two-step solution based on the boundary conditions of Crank's equations for mass transfer in a film was developed. Three driving factors, the diffusion (D), partition (Kp,f) and convective mass transfer coefficients (h), govern the sorption and/or desorption kinetics of migrants from polymer films. These three parameters were simultaneously estimated. They provide in-depth insight into the physics of a migration process. The first step was used to find the combination of D, Kp,f and h that minimized the sums of squared errors (SSE) between the predicted and actual results. In step 2, an ordinary least square (OLS) estimation was performed by using the proposed analytical solution containing D, Kp,f and h. Three selected migration studies of PLA/antioxidant-based films were used to demonstrate the use of this two-step solution. Additional parameter estimation approaches such as sequential and bootstrap were also performed to acquire a better knowledge about the kinetics of migration. The proposed model successfully provided the initial guesses for D, Kp,f and h. The h value was determined without performing a specific experiment for it. By determining h together with D, under or overestimation issues pertaining to a migration process can be avoided since these two parameters are correlated.
Migration studies of chemicals from contact materials have been widely conducted due to their importance in determining the safety and shelf life of a food product in their packages. The US Food and Drug Administration (FDA) and the European Food Safety Authority (EFSA) require this safety assessment for food contact materials. So, migration experiments are theoretically designed and experimentally conducted to obtain data that can be used to assess the kinetics of chemical release. In this work, a parameter estimation approach was used to review and to determine the mass transfer partition and diffusion coefficients governing the migration process of eight antioxidants from poly(lactic acid), PLA, based films into water/ethanol solutions at temperatures between 20 and 50°C. Scaled sensitivity coefficients were calculated to assess simultaneously estimation of a number of mass transfer parameters. An optimal experimental design approach was performed to show the importance of properly designing a migration experiment. Additional parameters also provide better insights on migration of the antioxidants. For example, the partition coefficients could be better estimated using data from the early part of the experiment instead at the end. Experiments could be conducted for shorter periods of time saving time and resources. Diffusion coefficients of the eight antioxidants from PLA films were between 0.2 and 19×10-14m2/s at ~40°C. The use of parameter estimation approach provided additional and useful insights about the migration of antioxidants from PLA films.
Food allergen labelling is mandatory and regulated whilst precautionary allergen labelling (PAL) remains voluntary in most countries. It is the aim of this study to identify the food allergens declared in food products sold in a developing country and to what extent food allergens and PAL are emphasised in the products. A total of 505 food and beverages (snacks, baked goods, confectionary, baby food, condiments & jams, beverages, powder & paste, instant food, chilled & frozen food and canned food) were evaluated in Malaysia. Soybean represents the largest group of food allergen declared in labels, followed by wheat and milk products. Thirteen variations of contains statement were found with "Contains [allergen(s)]" being the most common (55.02%). There were 22 different types of "may contain" statements with 'May contain traces of [allergen(s)]' being the most common advice labelling used (55.41%). Different font type or emphasis such as brackets (51.57%) and bold font (33.86%) were used to inform consumers about presence of allergens. The national regulations on food allergen labelling are then critically contrasted with other Asian countries and the EU Regulation No. 1169/2011, which represents one of the most stringent food regulations in the world. Improving current allergen labelling limitations and practices would be of great benefit to consumers to prevent risk of food hypersensitivity.