Displaying publications 1 - 20 of 64 in total

Abstract:
Sort:
  1. Chang YM, Perumal R, Keat PY, Yong RY, Kuehn DL, Burgoyne L
    Forensic Sci Int, 2007 Mar 2;166(2-3):115-20.
    PMID: 16765004
    The use of STR multiplexes with the incorporated gender marker Amelogenin is common practice in forensic DNA analysis. However, when a known male sample shows a dropout of the Amelogenin Y-allele, the STR system falsely genotypes it as a female. To date, our laboratory has observed 18 such cases: 12 from our Y-STR database and six from casework. A study on 980 male individuals in the Malaysian population using the AmpFlSTR Y-filer has revealed a distinct Y-chromosome haplotype associated with the Amelogenin nulls. Our results showed that whilst the Amelogenin nulls were noticeably absent among the Chinese, both the Indians and Malays exhibited such mutations at 3.2 and 0.6%, respectively. It was also found that the Amelogenin negative individuals predominantly belonged to the J2e lineage, suggesting the possibility of a common ancestor for at least some of these chromosomes. The null frequencies showed concordance with the data published in Chang et al. [Higher failures of Amelogenin sex test in an Indian population group, J. Forensic Sci. 48 (2003) 1309-1313] on a smaller Malaysian population of 338 males which used a Y-STR triplex. In the current study, apart from the absence of the Amelogenin Y-locus, a complete absence of the DYS458 locus in all the nulls was also observed. This study together with the 2003 study has indicated a similar deletion region exists on the Y(p)11.2 band in all the 18 Y-chromosomes. Using bioinformatics, this deletion has been mapped to a region of at least 1.13 Mb on the Y(p)11.2 encompassing the Amelogenin, MSY1 minisatellite and DYS458 locus. Further, the Y-filer haplotypes revealed an additional null at Y-GATA H4 in two of the Indian males presented here.
  2. Bae K, Kwon NJ, Han E
    Forensic Sci Int, 2018 Nov;292:45-49.
    PMID: 30273913 DOI: 10.1016/j.forsciint.2018.09.008
    Abuse of new psychoactive substances (NPSs) among youths is increasing at an unprecedented rate all over the world. In Asia, abuse of synthetic cannabinoids (SCs), kratom, and poppers has been reported, but up to date information related to abuse of these three NPSs is lacking. This literature review focuses on the recent abuse of these three NPS among Asian youth. Many studies have been conducted to investigate the abuse statuses of SCs in Asian youth in Turkey, Japan, and Korea, and many cases of kratom abuse have been reported in Malaysia and Thailand. In addition, concerns have been expressed about the use of kratom in combination with other substances by teenagers. Popper abuse has been reported among many young people in Asia, including Korea and China, and many studies on popper abuse have focused on men who have sex with men in China and Malaysia. Since NPS abuse can have severe adverse effects and create social problems, there is a continuing need to investigate NPS abuse status continuously among young people.
  3. Parthasarathy S, Ramanathan S, Murugaiyah V, Hamdan MR, Said MI, Lai CS, et al.
    Forensic Sci Int, 2013 Mar 10;226(1-3):183-7.
    PMID: 23385139 DOI: 10.1016/j.forsciint.2013.01.014
    Mitragyna speciosa, a native plant of Thailand and Malaysia known as 'ketum', is a plant of considerable interest. It exhibits strong antinociceptive effect and yet, acts like a psychostimulant. Due to the affordability and its ease of availability, the abuse of this plant as a substitute for other banned narcotics has become a major concern in many societies. In countries such as Thailand, Myanmar, Australia and Malaysia, the use of ketum is illegal. However, for a person to be charged for possessing or selling ketum, a reliable analytical method is needed in order to detect and identify the plant and its products. Mitragynine is the major alkaloid of ketum. This compound manifests its antinociceptive effects by acting on the opioid receptors. Since M. speciosa contain large quantity of mitragynine and it is exclusive to the species, the present analytical method is developed and validated for the purpose of screening ketum products based on this unique compound as the analytical marker. The method uses a HPLC-DAD system with Inertsil C8 (4.6 mm × 150 mm, 5 μm) as the column and a mixture of acetonitrile and formic acid, 50:50 (v/v), as the mobile phase. This method not only detects mitragynine, it can also be used to quantify the amount of mitragynine in the sample. The limit of detection is 0.25 μg/ml, while the limit of quantification is 0.50 μg/ml. The method is quick, simple and reliable with an accuracy of 97.27-101.74% and coefficient of variations of between 0.91 and 3.96%. The method has been tested and found suitable for the identification and quantification of mitragynine in dried plants, a variety of ketum extracts, as well as ketum drink obtained from the market.
  4. Uli N, Kuppuswamy R, Amran MF
    Forensic Sci Int, 2011 May 20;208(1-3):66-73.
    PMID: 21145675 DOI: 10.1016/j.forsciint.2010.11.005
    A brief survey to assess the sensitivity and efficacy of some common etching reagents for revealing obliterated engraved marks on Al-Si alloy surfaces is presented. Experimental observations have recommended use of alternate swabbing of 10% NaOH and 10% HNO(3) on the obliterated surfaces for obtaining the desired results. The NaOH etchant responsible for bringing back the original marks resulted in the deposition of some dark coating that has masked the recovered marks. The coating had been well removed by dissolving it in HNO(3) containing 10-20% acid. However, the above etching procedure was not effective on aluminium (99% purity) and Al-Zn-Mg-Cu alloy surfaces. Also the two reagents (i) immersion in 10% aq. phosphoric acid and (ii) alternate swabbing of 60% HCl and 40% NaOH suggested earlier for high strength Al-Zn-Mg-Cu alloys [23] were quite ineffective on Al-Si alloys. Thus different aluminium alloys needed different etching treatments for successfully restoring the obliterated marks. Al-Si alloys used in casting find wide applications especially in the manufacture of engine blocks of motor vehicles. Hence, the results presented in this paper are of much relevance in serial number restoration problems involving this alloy.
  5. Tan LJ, Koh CP, Lai SK, Poh WC, Othman MS, Hussin H
    Forensic Sci Int, 2022 Nov;340:111469.
    PMID: 36162300 DOI: 10.1016/j.forsciint.2022.111469
    The outbreak of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) started in December 2019. An immediate prevention approach for the outbreak is the development of a vaccination program. Despite a growing number of publications showing the effectiveness of vaccination in preventing SARS-CoV-2 outbreak and reducing the mortality rate, substantial fatal adverse effects were reported after vaccination. Confirmation of the causal relationship of death is required to reimburse under the national vaccination program and could provide a reference for the selection of vaccination. However, a lack of guidelines in the laboratory study and autopsy approach hampered the investigation of post-vaccination death. In this paper, we performed a systematic electronic search on scientific articles related to severe Covid-19 vaccination adverse effects and approaches in identifying the severe side effects using PubMed and Cochrane libraries. A summary on the onset, biochemistry changes and histopathological analyzes of major lethally side effects post-vaccination were discussed. Ultimately, a checklist is suggested to improve the quality of investigation.
  6. Jahanirad M, Wahab AW, Anuar NB
    Forensic Sci Int, 2016 May;262:242-75.
    PMID: 27060542 DOI: 10.1016/j.forsciint.2016.03.035
    Camera attribution plays an important role in digital image forensics by providing the evidence and distinguishing characteristics of the origin of the digital image. It allows the forensic analyser to find the possible source camera which captured the image under investigation. However, in real-world applications, these approaches have faced many challenges due to the large set of multimedia data publicly available through photo sharing and social network sites, captured with uncontrolled conditions and undergone variety of hardware and software post-processing operations. Moreover, the legal system only accepts the forensic analysis of the digital image evidence if the applied camera attribution techniques are unbiased, reliable, nondestructive and widely accepted by the experts in the field. The aim of this paper is to investigate the evolutionary trend of image source camera attribution approaches from fundamental to practice, in particular, with the application of image processing and data mining techniques. Extracting implicit knowledge from images using intrinsic image artifacts for source camera attribution requires a structured image mining process. In this paper, we attempt to provide an introductory tutorial on the image processing pipeline, to determine the general classification of the features corresponding to different components for source camera attribution. The article also reviews techniques of the source camera attribution more comprehensively in the domain of the image forensics in conjunction with the presentation of classifying ongoing developments within the specified area. The classification of the existing source camera attribution approaches is presented based on the specific parameters, such as colour image processing pipeline, hardware- and software-related artifacts and the methods to extract such artifacts. The more recent source camera attribution approaches, which have not yet gained sufficient attention among image forensics researchers, are also critically analysed and further categorised into four different classes, namely, optical aberrations based, sensor camera fingerprints based, processing statistics based and processing regularities based, to present a classification. Furthermore, this paper aims to investigate the challenging problems, and the proposed strategies of such schemes based on the suggested taxonomy to plot an evolution of the source camera attribution approaches with respect to the subjective optimisation criteria over the last decade. The optimisation criteria were determined based on the strategies proposed to increase the detection accuracy, robustness and computational efficiency of source camera brand, model or device attribution.
  7. Abdul Wahab MF, Mohamad Ghani NI, Kuppuswamy R
    Forensic Sci Int, 2012 Nov 30;223(1-3):53-63.
    PMID: 22955030 DOI: 10.1016/j.forsciint.2012.07.020
    Most of the automotive companies use cast iron for their engine blocks. Restoration of obliterated number on these iron surfaces by chemical etching is known to be quite difficult. Heating of the obliterated surface using oxyacetylene flame is an alternative recovery treatment suggested in literature and used in practice. However chemical etching has been established to be the most sensitive technique for detection of metal deformation present under stamped serial numbers. Hence, the current work investigated the suitability of some common etchants on cast iron surfaces with a view to determining the most suitable one for revealing the obliterated marks. The reagents tested were mostly copper containing Fry's reagent and its modifications. Two cast iron engine blocks (3.29%C and 3.1%C) of two cars--a Proton Saga and a Toyota--were utilized for the experiments. The engine blocks were cut into several small plates and each plate was stamped with some numerical characters at 8 kN load using Instron Table Mounted Universal Testing Machine. The depth of stamping impression varied between 0.2 mm and 0.3 mm. The stamped number was completely ground off manually using a metal file. The grounded surface was then polished smooth using emery papers and etched with a few selected reagents mostly by swabbing. Experimental results showed that a modified Fry's composition consisting of 4 5g CuCl(2), 100 mL HCl, and 180 mL H(2)O restored the number with better contrast at a reasonably shorter time. The above reagent is a slightly modified form of one of the Fry's original compositions--45 g CuCl(2), 180 mL HCl, and 100 mL H(2)O. Quite importantly the proposed reagent restored the original stamped numbers of both Proton and Toyota cars and also a Mitsubishi car that had been obliterated. The most widely used Fry's composition (90 g CuCl(2), 120 mL HCl and 100 mL H(2)O), although recovered the obliterated number, did not cause the desired contrast.
  8. Md Ghani NA, Liong CY, Jemain AA
    Forensic Sci Int, 2010 May 20;198(1-3):143-9.
    PMID: 20211535 DOI: 10.1016/j.forsciint.2010.02.011
    The task of identifying firearms from forensic ballistics specimens is exacting in crime investigation since the last two decades. Every firearm, regardless of its size, make and model, has its own unique 'fingerprint'. These fingerprints transfer when a firearm is fired to the fired bullet and cartridge case. The components that are involved in producing these unique characteristics are the firing chamber, breech face, firing pin, ejector, extractor and the rifling of the barrel. These unique characteristics are the critical features in identifying firearms. It allows investigators to decide on which particular firearm that has fired the bullet. Traditionally the comparison of ballistic evidence has been a tedious and time-consuming process requiring highly skilled examiners. Therefore, the main objective of this study is the extraction and identification of suitable features from firing pin impression of cartridge case images for firearm recognition. Some previous studies have shown that firing pin impression of cartridge case is one of the most important characteristics used for identifying an individual firearm. In this study, data are gathered using 747 cartridge case images captured from five different pistols of type 9mm Parabellum Vektor SP1, made in South Africa. All the images of the cartridge cases are then segmented into three regions, forming three different set of images, i.e. firing pin impression image, centre of firing pin impression image and ring of firing pin impression image. Then geometric moments up to the sixth order were generated from each part of the images to form a set of numerical features. These 48 features were found to be significantly different using the MANOVA test. This high dimension of features is then reduced into only 11 significant features using correlation analysis. Classification results using cross-validation under discriminant analysis show that 96.7% of the images were classified correctly. These results demonstrate the value of geometric moments technique for producing a set of numerical features, based on which the identification of firearms are made.
  9. Chuah SY, Tan WF, Yap KH, Tai HE, Chow ST
    Forensic Sci Int, 1994 Oct 21;68(3):169-80.
    PMID: 7982636
    The distributions of the D1S80 alleles and genotypes in the Chinese, Malays and Indians in Singapore were determined by amplified fragment length polymorphism (AMP-FLP) analysis. The distributions of the observed genotypes for the three races conformed to Hardy-Weinberg expectations. The system was applied to 19 families whose paternity had been established by restriction fragment length polymorphism (RFLP) analysis. In all cases, Mendelian inheritance of the alleles at the D1S80 locus could be demonstrated. D1S80 typing on DNA recovered by differential extraction of forensic specimens which included vaginal swabs, urethral swabs and seminal stains yielded consistent results.
  10. Jahanirad M, Anuar NB, Wahab AWA
    Forensic Sci Int, 2017 Mar;272:111-126.
    PMID: 28129583 DOI: 10.1016/j.forsciint.2017.01.010
    The VoIP services provide fertile ground for criminal activity, thus identifying the transmitting computer devices from recorded VoIP call may help the forensic investigator to reveal useful information. It also proves the authenticity of the call recording submitted to the court as evidence. This paper extended the previous study on the use of recorded VoIP call for blind source computer device identification. Although initial results were promising but theoretical reasoning for this is yet to be found. The study suggested computing entropy of mel-frequency cepstrum coefficients (entropy-MFCC) from near-silent segments as an intrinsic feature set that captures the device response function due to the tolerances in the electronic components of individual computer devices. By applying the supervised learning techniques of naïve Bayesian, linear logistic regression, neural networks and support vector machines to the entropy-MFCC features, state-of-the-art identification accuracy of near 99.9% has been achieved on different sets of computer devices for both call recording and microphone recording scenarios. Furthermore, unsupervised learning techniques, including simple k-means, expectation-maximization and density-based spatial clustering of applications with noise (DBSCAN) provided promising results for call recording dataset by assigning the majority of instances to their correct clusters.
  11. Abd Warif NB, Idris MYI, Abdul Wahab AW, Salleh R, Ismail A
    Forensic Sci Int, 2019 Feb;295:83-99.
    PMID: 30576953 DOI: 10.1016/j.forsciint.2018.12.004
    Taking into consideration that the prior CMF detection methods rely on several fixed threshold values in the filtering process, we propose an efficient CMF detection method with an automatic threshold selection, named as CMF-iteMS. The CMF-iteMS recommends a PatchMatch-based CMF detection method that adapts Fourier-Mellin Transform (FMT) as the feature extraction technique while a new automatic threshold selection based on iterative means of regions size (iteMS) procedure is introduced to have flexibility in changing the threshold value for various characteristics (quality, sizes, and attacks) in each input image. To ensure the reliability of the proposed CMF-iteMS, the method is compared with four state-of-the-art CMF detection methods based on Scale Invariant Feature Transform (SIFT), patch matching, multi-scale analysis and symmetry techniques using three available datasets that cover the variety of characteristics in CMF images. The results show that the F-score of the CMF-iteMS outperformed existing CMF detection methods by exceeding an average of 90% F-score values for image-level evaluation and 82% of F-score value for pixel-level evaluation for all datasets in original size. As special attention is given to the image resizing attack, the method is able to maintain the highest performance even if the images in the datasets are resized to 0.25 parameter.
  12. Kuppuswamy R
    Forensic Sci Int, 2003 Jul 08;134(2-3):123-5.
    PMID: 12850406
    A case is presented in which a camera recovered from a site of bomb blast was linked to some incriminating film negatives by the characteristic markings existing along a small portion of the edge of the film negatives.
  13. Khoo LS, Lai PS, Saidin MH, Noor Z, Mahmood MS
    Forensic Sci Int, 2018 Apr;285:50-57.
    PMID: 29433011 DOI: 10.1016/j.forsciint.2018.01.018
    Cadaver body bags are the conventional method to contain a human body or human remains, which includes the use for storage and transportation of the deceased at any crime scene or disaster scene. During disasters, most often than not, the first responders including the police will be equipped with cadaver body bags to do scene processing of human remains and collection of personal belongings at the disaster site. However, in an unanticipated large scale disasters involving hundreds and thousands of fatalities, cadaver body bags supplies may be scarce. The authors have therefore innovated the cling film plastic wrap as an alternative for the cadaver body bag used at the disaster site. The plastic wrap was tested on six different experimental subjects, i.e. both adult and child mannequins; body parts of the mannequin figure (arm and hand); a human adult subject and an unknown dead body. The strengths of the cling film plastic wrap are discussed in comparison with the cadaver body bag in the aspects of costing, weight, duration of the wrap, water and body fluid resistant properties, visibility and other advantages. An average savings of more than 5000% are noted for both adult body wrap and child body wrap compared to the cadaver body wrap. This simply means that the authors can either wrap 25 adult dead bodies or 80 children dead bodies with the cost of 1 cadaver body bag. The cling film plastic wrap has proven to have significant innovation impact for dead body management particularly by the first responders in large scale disasters. With proper handling of dead bodies, first responders can manage the dead with dignity and respect in an overwhelmed situation to facilitate the humanitarian victim identification process later.
  14. Jayaraman J, Roberts GJ
    Forensic Sci Int, 2018 Nov;292:61-70.
    PMID: 30269046 DOI: 10.1016/j.forsciint.2018.09.005
    Understanding dental maturation in ethnically distinct populations is important in forensic age estimations and the presence of population differences in dental maturation was highly debated. No such comparison had been performed between two major populations; Caucasian and Chinese. This study aims to analyze and compare the maturation of permanent teeth from a sample of Caucasian and Chinese populations. Dental panoramic radiographs of subjects aged 2-24years belonging to United Kingdom (UK) Caucasian and Hong Kong (HK) Chinese populations were obtained from a teaching hospital. The teeth were scored and reference datasets were developed separately for males and females. Statistical significance was set at p<0.05 and independent sample t-test was conducted between the average ages at assessment for each stage of development for all the teeth in both groups. The HK Chinese were dentally advanced than the UK Caucasians by an average of 5 months, however, reverse trend was observed in third molars (p<0.05). These findings must be considered whilst utilising population specific reference dataset for dental age estimation.
  15. Darmawan MF, Yusuf SM, Kadir MR, Haron H
    Forensic Sci Int, 2015 Feb;247:130.e1-11.
    PMID: 25540897 DOI: 10.1016/j.forsciint.2014.11.007
    Sex estimation is used in forensic anthropology to assist the identification of individual remains. However, the estimation techniques tend to be unique and applicable only to a certain population. This paper analyzed sex estimation on living individual child below 19 years old using the length of 19 bones of left hand applied for three classification techniques, which were Discriminant Function Analysis (DFA), Support Vector Machine (SVM) and Artificial Neural Network (ANN) multilayer perceptron. These techniques were carried out on X-ray images of the left hand taken from an Asian population data set. All the 19 bones of the left hand were measured using Free Image software, and all the techniques were performed using MATLAB. The group of age "16-19" years old and "7-9" years old were the groups that could be used for sex estimation with as their average of accuracy percentage was above 80%. ANN model was the best classification technique with the highest average of accuracy percentage in the two groups of age compared to other classification techniques. The results show that each classification technique has the best accuracy percentage on each different group of age.
  16. Jayaprakash PT
    Forensic Sci Int, 2015 Jan;246:110-21.
    PMID: 25498986 DOI: 10.1016/j.forsciint.2014.10.043
    Establishing identification during skull-photo superimposition relies on correlating the salient morphological features of an unidentified skull with those of a face-image of a suspected dead individual using image overlay processes. Technical progression in the process of overlay has included the incorporation of video cameras, image-mixing devices and software that enables real-time vision-mixing. Conceptual transitions occur in the superimposition methods that involve 'life-size' images, that achieve orientation of the skull to the posture of the face in the photograph and that assess the extent of match. A recent report on the reliability of identification using the superimposition method adopted the currently prevalent methods and suggested an increased rate of failures when skulls were compared with related and unrelated face images. The reported reduction in the reliability of the superimposition method prompted a review of the transition in the concepts that are involved in skull-photo superimposition. The prevalent popular methods for visualizing the superimposed images at less than 'life-size', overlaying skull-face images by relying on the cranial and facial landmarks in the frontal plane when orienting the skull for matching and evaluating the match on a morphological basis by relying on mix-mode alone are the major departures in the methodology that may have reduced the identification reliability. The need to reassess the reliability of the method that incorporates the concepts which have been considered appropriate by the practitioners is stressed.
  17. Chainchel Singh MK, Abdul Rashid SN, Abdul Hamid S, Mahmood MS, Feng SS, Mohd Nawawi H, et al.
    Forensic Sci Int, 2020 Mar;308:110171.
    PMID: 32032870 DOI: 10.1016/j.forsciint.2020.110171
    BACKGROUND: Post-mortem Computed Tomography (PMCT) allows non-invasive or minimally invasive detection of findings that may or may not be visible during conventional autopsy, however, it does not allow the investigator to draw any conclusions regarding patency of the vessel's lumen. To address this deficiency, Post-mortem Computed Tomography Angiography (PMCTA) utilizing different contrast media and techniques have been introduced with various studies looking at the correlation between PMCTA, autopsy (gross) findings and coronary artery histology in diagnosing coronary artery disease.

    OBJECTIVES: The aim of this study is to investigate the sensitivity and specificity of PMCTA in diagnosing coronary artery stenosis using water-based contrast media introduced though the vessels of the neck, compared to the gold standard of diagnosis i.e. gross and histological evaluation of the coronary artery.

    METHOD: This was a cross sectional study of 158 arterial sections involving 37 subjects recruited from the National Institute of Forensic Medicine (IPFN), Hospital Kuala Lumpur (HKL). An unenhanced PMCT was performed followed by PMCTA using water-based contrast media introduced though the vessels of the neck. Coronary artery stenosis was determined using multiplanar reconstructionD while the degree of stenosis was determined by calculating the percentage of luminal diameter divided by the diameter of the vessel internal elastic.

    RESULTS: The analysis of PMCTA and histopathology examinations revealed a sensitivity of 61.5%, specificity of 91.7%; positive predictive value (PPV) of 40.0% and negative predictive value (NPV) of 96.4%.

    CONCLUSION: PMCTA utilizing water-based contrast introduced though the vessels of the neck yielded similar results as other methods and techniques of PMCTA. We would therefore conclude that PMCTA utilizing this technique could be used to assess the degree of calcification and the presence of significant stenosis.

  18. Tan SH, Rizman-Idid M, Mohd-Aris E, Kurahashi H, Mohamed Z
    Forensic Sci Int, 2010 Jun 15;199(1-3):43-9.
    PMID: 20392577 DOI: 10.1016/j.forsciint.2010.02.034
    Insect larvae and adult insects found on human corpses provide important clues for the estimation of the postmortem interval (PMI). Among all necrophagous insects, flesh flies (Diptera: Sarcophagidae) are considered as carrion flies of forensic importance. DNA variations of 17 Malaysian, two Indonesian and one Japanese flesh fly species are analysed using the mitochondrial COI and COII. These two DNA regions were useful for identifying most species experimented. However, characterisation of the species was not sufficiently made in the case of Sarcophaga javanica. Seventeen Malaysian species of forensic importance were successfully clustered into distinct clades and grouped into the six species groups: peregrina, albiceps, dux, pattoni, princeps and ruficornis. These groups correspond with generic or subgeneric taxa of the subfamily Sarcophaginae: Boettcherisca, Parasarcophaga, Liosarcophaga, Sarcorohdendorfia-Lioproctia, Harpagophalla-Seniorwhitea and Liopygia. The genetic variations found in COI and COII can be applied not only to identify the species of forensic importance, but also to understand the taxonomic positions, generic or subgeneric status, of the sarcophagine species.
  19. Ismael Al-Sanjary O, Ahmed AA, Sulong G
    Forensic Sci Int, 2016 Sep;266:565-572.
    PMID: 27574113 DOI: 10.1016/j.forsciint.2016.07.013
    Forgery is an act of modifying a document, product, image or video, among other media. Video tampering detection research requires an inclusive database of video modification. This paper aims to discuss a comprehensive proposal to create a dataset composed of modified videos for forensic investigation, in order to standardize existing techniques for detecting video tampering. The primary purpose of developing and designing this new video library is for usage in video forensics, which can be consciously associated with reliable verification using dynamic and static camera recognition. To the best of the author's knowledge, there exists no similar library among the research community. Videos were sourced from YouTube and by exploring social networking sites extensively by observing posted videos and rating their feedback. The video tampering dataset (VTD) comprises a total of 33 videos, divided among three categories in video tampering: (1) copy-move, (2) splicing, and (3) swapping-frames. Compared to existing datasets, this is a higher number of tampered videos, and with longer durations. The duration of every video is 16s, with a 1280×720 resolution, and a frame rate of 30 frames per second. Moreover, all videos possess the same formatting quality (720p(HD).avi). Both temporal and spatial video features were considered carefully during selection of the videos, and there exists complete information related to the doctored regions in every modified video in the VTD dataset. This database has been made publically available for research on splicing, Swapping frames, and copy-move tampering, and, as such, various video tampering detection issues with ground truth. The database has been utilised by many international researchers and groups of researchers.
  20. Hamzah NH
    Forensic Sci Int, 2016 07;264:106-12.
    PMID: 27081766 DOI: 10.1016/j.forsciint.2016.03.050
    The ability to objectify ballistic evidence is a challenge faced by firearms examiners around the world. A number of researchers are trying to improve bullet-identification systems to address deficiencies detailed within the National Academy of Science report (2009). More recently focus has turned to making use of more sophisticated imaging modalities to view entire regions of the projectile and the development of automated systems for the comparison of the topographical surfaces recorded. Projectiles from a newly bought air pistol with 0.177 calibre pellets (unjacketed), fired series of 609 pellets were examined using an optical microscope. A mathematical methodology was developed to pre-process the resultant topographical maps generating point data for comparison, analysed using the principal component analysis (PCA). In most cases limited to reasonable success was achieved. The objective method still requires an operator to identify the Land Engraved Areas to be scanned, however the mathematical alignments were objectively achieved. The PCA results illustrated that the striation marks were neither exclusive nor specific to the LEA regions but rather crossed over regions. This study also proves that a single weapon does not necessarily leave identical marks of projectiles on its surface.
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links