MyMedR

Fulltext OSNC3: Malaysian's General Dental Practitioner (GDP) Opinion on Mandatory Requirement of Continuing Professional Development (CPD)

Abdul Hamid NF, Affendy NHK

J Indian Prosthodont Soc, 2018 Oct;18(Suppl 1):S30.

PMID: 30532444 DOI: 10.4103/0972-4052.244643

Fulltext CRNC7: Sequential and Simplified Approach for Full Mouth Implant Supported Fixed Dental Prosthesis: A Clinical Report

Affendi NHK, Abdul Hamid NFB

J Indian Prosthodont Soc, 2018 Oct;18(Suppl 1):S48.

PMID: 30532481 DOI: 10.4103/0972-4052.244578

Fulltext Replacement of missing anterior tooth using screw retained implant prosthesis in the esthetic zone: a case report with 3 years of follow up

Ahmad M, Dhanasekar B, Aparna IN, Naim H

J Indian Prosthodont Soc, 2014 Sep;14(3):297-300.

PMID: 25183915 DOI: 10.1007/s13191-012-0188-8

As more and more dental practitioners are focusing on implant-supported fixed restorations, some clinicians favor the use of cement retained restorations while others consider screw-retained prosthesis to be the best choice. As both types of prostheses have certain advantages and disadvantages, clinicians should be aware of the limitations of each type. Screw-retained implant restorations have an advantage of predictable retention, retrievability and lack of potentially retained sub-gingival cement. However, a few disadvantages exist such as precise placement of the implant for optimal and esthetic location of the screw access hole and obtaining passive fit. On the other hand, cement retained restorations eliminates unaesthetic screw access holes; have passive fit of castings; reduce stress to splinted implants because of minor misfit of the framework; reduced complexity of lab procedures; enhanced esthetics; reduced cost factors and non disrupted morphology of the occlusal table. This case report presents the replacement of missing left central incisor using screw-retained implant prosthesis due to palatal trajectory of the implant placement and inadequate abutment height for retention of cement retained prosthesis.

Fulltext OSC6: An Audit on the Efficiency of Chair-mounted LED Light Curing Units in Faculty of Dentistry, Universiti Teknologi MARA, Malaysia

Ali Babiker JM, Lim TW, Tengku Mohd Ariff TF

J Indian Prosthodont Soc, 2018 Oct;18(Suppl 1):S9.

PMID: 30532397 DOI: 10.4103/0972-4052.244595

Fulltext OSC23: In-Vitro Color Stability of Two Indirect Zirconium Silicate Composite Restorative Materials

Anuar MAF, Ramli S, Kassim ZHM, Ismail IH

J Indian Prosthodont Soc, 2018 Oct;18(Suppl 1):S17.

PMID: 30532416 DOI: 10.4103/0972-4052.244613

A new approach for better anterior esthetic using platelet-rich fibrin as sole graft material combined with ovate design dental bridge

Buzayan MM, Mahdey HM, Ning CJ

J Indian Prosthodont Soc, 2020 04 07;20(2):219-223.

PMID: 32655228 DOI: 10.4103/jips.jips_264_19

Alveolar ridge deficiency is considered a major esthetic limitation, especially in the maxillary anterior region. Several approaches have been developed to enhance and increase the soft-tissue volume. Among those approaches are connective tissue grafts, platelet-rich fibrin (PRF) membrane and implying the guided bone regeneration concept. The PRF grafting technique was employed in this clinical case to improve and enhance the anterior esthetic without the need for the bone graft and augmentation. This article describes the use of PRF as a sole grafting material for both socket and soft-tissue augmentation for a 23-year-old male, who had an accident 8 years ago while he was playing a basketball, which caused his upper front teeth to be intruded and discolored. The upper left central tooth suffered a major external root resorption; hence, it was extracted. PRF was prepared and packed in and extruded out of the socket. This was combined with ovate design provisional bridge. Ten days, 1 month, 3 months, and 6 months postoperative review showed a significantly well-progressed healing. According to the encouraging result obtained in this clinical case in regard to tissue healing and esthetic, the PRF can be a potential sole graft material for small anterior deficient areas. This may reduce the need of bone augmentation and graft in such selected cases.

Fulltext Passive Fit in Screw Retained Multi-unit Implant Prosthesis Understanding and Achieving: A Review of the Literature

Buzayan MM, Yunus NB

J Indian Prosthodont Soc, 2014 Mar;14(1):16-23.

PMID: 24604993 DOI: 10.1007/s13191-013-0343-x

One of the considerable challenges for screw-retained multi-unit implant prosthesis is achieving a passive fit of the prosthesis' superstructure to the implants. This passive fit is supposed to be one of the most vital requirements for the maintenance of the osseointegration. On the other hand, the misfit of the implant supported superstructure may lead to unfavourable complications, which can be mechanical or biological in nature. The manifestations of these complications may range from fracture of various components in the implant system, pain, marginal bone loss, and even loss of osseointegration. Thus, minimizing the misfit and optimizing the passive fit should be a prerequisite for implant survival and success. The purpose of this article is to present and summarize some aspects of the passive fit achieving and improving methods. The literature review was performed through Science Direct, Pubmed, and Google database. They were searched in English using the following combinations of keywords: passive fit, implant misfit and framework misfit. Articles were selected on the basis of whether they had sufficient information related to framework misfit's related factors, passive fit and its achievement techniques, marginal bone changes relation with the misfit, implant impression techniques and splinting concept. The related references were selected in order to emphasize the importance of the passive fit achievement and the misfit minimizing. Despite the fact that the literature presents considerable information regarding the framework's misfit, there was not consistency in literature on a specified number or even a range to be the acceptable level of misfit. On the other hand, a review of the literature revealed that the complete passive fit still remains a tricky goal to be achieved by the prosthodontist.

Fulltext CRNC3: Gingival Veneer: A Prosthetic Solution to Enhance Smile by Masking Aesthetically Challenging Gum Recession

Fong FM, Che Ahmad A

J Indian Prosthodont Soc, 2018 Oct;18(Suppl 1):S46.

PMID: 30532476 DOI: 10.4103/0972-4052.244680

Fulltext The Dilemma of Vertical Ridge Augmentation: The Best and Predictable Technique Available

Ghani HA

J Indian Prosthodont Soc, 2018 Oct;18(Suppl 1):S4.

PMID: 30532388 DOI: 10.4103/0972-4052.244671

Fulltext OSC7: Development of Prescale Film for Occlusal Force Analysis: A Pilot Study

Idris RI, Tasri NI, Yusof SF, Shoji Y, Lim TW

J Indian Prosthodont Soc, 2018 Oct;18(Suppl 1):S9-S10.

PMID: 30532399 DOI: 10.4103/0972-4052.244596

Fulltext OSC28: Relationship between Occlusion Schemes and Temporomandibular Disorders in Malaysian Population

Jain A, Sridevi U, Krishnan S, Morgan S

J Indian Prosthodont Soc, 2018 Oct;18(Suppl 1):S19.

PMID: 30532420 DOI: 10.4103/0972-4052.244619

Fulltext 37. Friction fit removable prosthesis -a case report

Kamath V

J Indian Prosthodont Soc, 2018 Nov;18(Suppl 2):S106.

PMID: 30602908 DOI: 10.4103/0972-4052.246613

Fulltext CRC13: Management of Snoring with Novel Mandibular Advancement Device in a Bruxing Patient: A Case Report

Kashmoola S, Ariff TFTM, Shoji Y

J Indian Prosthodont Soc, 2018 Oct;18(Suppl 1):S40-S41.

PMID: 30532463 DOI: 10.4103/0972-4052.244668

Fulltext OSC9: Colour Stability and Matching Accuracy of Custom Dual Laminated Composite Resin Shade Guide

Kassim MZ, Rahimi SN, Berhanuddin MA, Ghani SMA, Lim TW

J Indian Prosthodont Soc, 2018 Oct;18(Suppl 1):S10-S11.

PMID: 30532400 DOI: 10.4103/0972-4052.244598

Fulltext Fixed screw-retained interim restorations with immediate implant placement in esthetic zone: A case series with six different techniques

Kher U, Patil PG, Tunkiwala A, Nimbalkar S

J Indian Prosthodont Soc, 2022;22(1):97-103.

PMID: 36510953 DOI: 10.4103/jips.jips_229_21

Postextraction immediate implant placement in the esthetic zone is a common treatment modality. Immediate fixed interim restoration following immediate implant placement may provide excellent esthetic results to the patients and boost the clinicians' confidence. This paper demonstrates a series of six different techniques used to fabricate the customized screw-retained interim restorations following immediate implant placement with partial extraction therapy in the maxillary anterior esthetic zone. The techniques have utilized a putty index, polycarbonate shell crown, patients' existing crowns (prosthetic or natural), or laminate veneer, or fabricated in the laboratory based on the specific clinical situation. Advantages and limitations of each technique including alternative techniques or materials have been discussed. Excellent esthetic results were obtained with all six techniques using the screw-retained immediate interim restorations following partial extraction therapy and immediate implant placement.

Fulltext OSC47: Efficacy of Four Different Types of Bleaching Agents on Stained Natural Teeth using Spectrophotometer

Kohli S, Yin ASY, Nam WL, Hamdan HD, Roslan QA

J Indian Prosthodont Soc, 2018 Oct;18(Suppl 1):S28.

PMID: 30532438 DOI: 10.4103/0972-4052.244640

Fulltext OSC39: Interrelationship of Tooth and Skin Colour across Different Skin Tones in the Malaysian Population - A Pilot Study

Kotian S, Jujare RH, Ian FG, Yao LG, Dzainuddin NNB, Man WP

J Indian Prosthodont Soc, 2018 Oct;18(Suppl 1):S24.

PMID: 30532430 DOI: 10.4103/0972-4052.244631

Fulltext CRC14: Different Approaches to Morse Taper Abutment Fracture

Lim EL, Ngeow WC, Lim D, Chai WL

J Indian Prosthodont Soc, 2018 Oct;18(Suppl 1):S41.

PMID: 30532466 DOI: 10.4103/0972-4052.244669

Fulltext CRC20: Multidisciplinary Management of Anterior Tooth Wear

Mahmud M

J Indian Prosthodont Soc, 2018 Oct;18(Suppl 1):S44.

PMID: 30532473 DOI: 10.4103/0972-4052.244676

Fulltext Comparison of cooling methods on denture base adaptation of rapid heat-cured acrylic using a three-dimensional superimposition technique

May LW, John J, Seong LG, Abidin ZZ, Ibrahim N, Danaee M, et al.

J Indian Prosthodont Soc, 2021 5 4;21(2):198-203.

PMID: 33938871 DOI: 10.4103/jips.jips_41_21

Aim: To investigate the effect of different cooling methods on denture base adaptation of rapid heat-cured acrylic resin using 3D superimposition technique.

Setting and Design: In vitro - Comparative study.

Materials and Methods: Denture base adaptation of two different rapid heat-cured polymethyl methacrylate acrylic resins using five different cooling methods were compared. Forty maxillary edentulous stone cast were prepared to produce the denture bases with standardized thickness. The specimens were divided into five groups (n = 8) according to type of materials and cooling methods. The master stone cast and all forty denture bases were scanned with 3Shape E1 laboratory scanner. The scanned images of each of the denture bases were superimposed over the scanned image of the master cast using Materialize 3-matic software. Three dimensional differences between the two surfaces were calculated and color surface maps were generated for visual qualitative assessment.

Statistical Analysis Used: Generalized Linear Model Test, Bonferroni Post Hoc Analysis.

Results: All bench-cooled specimens showed wide green-colored area in the overall palatal surface, while the rapid cooled specimens presented with increased red color areas especially at the palate and post dam area. Generalized Linear Model test followed by Bonferroni post hoc analysis showed significant difference in the root mean square values among the specimen groups.

Conclusion: Samples that were bench cooled, demonstrated better overall accuracy compared to the rapid cooling groups. Regardless of need for shorter denture processing time, bench cooling of rapid heat-cured PMMA is essential for acceptable denture base adaptation.

Displaying publications 1 - 20 of 48 in total