Displaying publications 1 - 20 of 209 in total

Abstract:
Sort:
  1. Abdul Aziz Mohamed, Hafizal Yazid, Megat Harun, M.A.
    MyJurnal
    Thermoplastic natural rubber sample is found isotropic based on Small Angle X-Ray Scattering (SAXS) pattern. Morphological interpretation was deduced based on ideal lamellar morphology using 1-D correlation function. The fitting was carried out using Porod tail model and Vonk for backextrapolated model. It is found that the long period value is 15. 7nm which is comparable to results obtained from Lorenzt corrected profile, 20nm. Crystalline thickness and amorphous thickness was found as 13.4 and 2.31nm respectively.
  2. Abdul Hannan Damahuri, Hassan Mohamed, Abdul Aziz Mohamed
    MyJurnal
    Thorium is a fertile material that can undergo transmutation for it to become a fissile material,
    uranium-233. The fissile material can go through a fission process in order to generate heat energy
    and eventually electricity. Most nuclear reactors use uranium as their fission source. The use of
    thorium as nuclear fuel has been only investigated for few types of reactors such as a high, temperature
    gas reactor (HTGR), fast breeder reactor, light water reactor (LWR) and heavy water reactor
    (HWR). For research reactors specifically, there are limited academic publications related to the
    la,test u.se of thorium. Hence, the main, interest, of this work is to compile and review the latest
    academic publications related to the active use of thorium, for research reactors in particular. The
    reviewed studies have been, divided into two categories which are experimented and simulation projects.
    The experimental projects are a,bold the ongoing thorium fuel tests that have been carried out. in an
    actual, research reactor. On the hand, the simulation work: is related to the computational analysis
    performed in predicting the neutronic behaviour of thorium based fuel in research reactors. The
    experimented study of thorium is currently active for the KAMINI research reactor. Additionally, most,
    simulation works focus on finding criticality and neutron spectra.
  3. Abubaker Ali Yousif, Ismail Bahari, Muhamad Samudi Yasir
    MyJurnal
    To quantify the effectiveness of deuterons and helium particles at low doses, the inactivation rate in
    vitro for V79 cells has been extracted from radiobiological published data. The Physical parameters
    characteristics of these charged particles such as the linear energy transfer, the restricted linear
    energy transfer, the linear primary ionization and the mean free path are determined. The
    relationship between the inactivation rate and the physical parameters for deuterons and heluim-3
    particles has been established in this research. This approach enables in getting the distinctive
    biological response in terms of varies physical quality parameters. The best statistical regression
    fittings are formulated for each correlation.
  4. Aferka, S., Abdullah, J., Olujic, Z., Saroha, A.K., Crine, M., Toye, D., et al.
    MyJurnal
    This work focuses on the use of X-ray tomography in investigating the flow distribution in a structured packed bed. Cross sections of the liquid hold up distribution in a 10 cm diameter column packed with Katapak-SP12 are obtained at various column heights for different liquid flow rates. The repartition of the liquid hold up between baskets and corrugated sheets is quantified. Wall wipers and column wall effects are visualized. Results are obtained from an initially dry column without gas flow.
  5. Affendi, A.F., Hasmaliza, M., Srimala, S.
    MyJurnal
    In these studies, cordierite was mechanically synthesized after a sol-gel process. The effect of milling time of cordierite was investigated. Aluminium nitrate nonahydrate, magnesium nitrate hexahydrate and tetraethylorthosilicate (TEOS) were used as starting materials. Gels obtained were mechanically activated in planetary ball mill by at 300rpm grinding speed and grinding time (15min, 30min, 45min and 60min). Powders produced were characterized by X-Ray Diffraction (XRD) and Field Emission Scanning Electron Microscope (FESEM) and Energy Dispersive X-Ray (EDX). XRD analysis proved that α-cordierite was formed at lower temperature (1200°C) as compliment to without grinding, whereby it is formed at1300°C. FESEM analysis shows the size of the cordierite were in submicron scale. EDX analysis proved that magnesium, aluminium, silicon and oxygen are elements existed in cordierite.
  6. Afishah Alias, Siti Rahayu Mohd Hashim, Wajir, Julynnie, Fauziah Abdul Aziz, Mihaly, Judith
    MyJurnal
    Unaffected, affected and heavily affected teeth enamel were studied by using FT-Raman spectroscopy. The 14 permanent teeth’s enamel surface were measured randomly, resulting in total n=43 FT-Raman spectra. The results obtained from FT-Raman spectra of heavily affected, affected and unaffected tooth’s enamel surfaces did not show any significant difference. In this study, Kruskal-Wallis and Wilcoxon rank sum tests were used to compare the intensity between the categories of enamel as well as the surfaces of teeth samples.
  7. Afishah Alias, Fauziah Abdul Aziz, Abd. Rashid Hassan
    MyJurnal
    In this study, the unaffected, affected and heavily affected teeth were studied by using X-Ray diffraction method. The D-values, which are related to the crystallite size of the apatite crystals, were calculated according to the Sherrer equation. The crystallite size of unaffected enamel was found to be 1530.95Å, while the affected enamel was 1490.22Å and the heavily affected enamel was 1484.16Å respectively. This study showed that the unaffected enamel has greater crystallite size as compared to the affected and heavily affected enamel.
  8. Ahmad Saat, Zaini Hamzah, Zaharidah Abu Bakar
    MyJurnal
    Being an imperative material for man either used as building materials, pottery or as components in material industry and technology, knowledge of clays elemental contents is important. In the present study ten clay samples obtained from various locations in North-West Peninsular Malaysia were used. Majority of the clays were economically manufactured to be used as building materials or pottery. The objective of study was to determine the main elemental contents of the samples, and relate the results to the types of minerals, as well as to compare them with clays from other studies. In the study X-ray Fluorescence (XRF) coupled to samples dilution method and standard calibration samples was used. The elements detected in the study were Si, Al, Fe, Ti, K and Ca. Depending on locations, the percentage concentration ranged between 24.8 – 32.4 for Si, 10.8 – 19.0 for Al, 0.09 – 2.12 for Fe, 0.08 – 1.13 for Ti, 0.45 – 3.39 for K and trace amount of Ca and P. However, Mg that normally found in typical clay was not found in the studied samples. Comparing the oxide of the major elements with other studies, it was found that the clay samples contained mixtures of kaolinite (two-layered structure) and illite (three-layered structure).
  9. Ahmad Saat, Nurulhuda Kassim, Zaini Hamzah, Ahmad Farisz
    MyJurnal
    Taman Negara is a famous tourism destination for nature lover in Malaysia. The area is well kept from human activities and disturbances. Since there is no data for human exposure to natural radiation, there is a need to do this study. It will give a baseline data for surface dose and radionuclide concentrations and one can estimate the external hazards index for the visitor to this unexplored area, i.e. UiTM-Perhilitan research station, Kuala Keniam, Taman Negara, Malaysia. The surface dose rate measurements were done in-situ using portable radiation survey meter at the surface and 1 m above the surface. The top soil samples were taken using hand auger up to 15 cm depth at nine locations around research station. Samples were brought back to the UiTM laboratory in Shah Alam, dried, ground to powder form, and sieved using 250 μm sieve. Then the uranium and thorium concentrations were analyzed using Energy Dispersive X-Ray Fluorescence (EDXRF).The mean value for surface dose rates on surface were 0.164 μSv/hr while the mean value for surface dose rates on 1m above the surface were 0.161 μSv/hr. The mean concentration of thorium was 2.62μg/g while the mean concentration of uranium was 0.61μg/g.
  10. Ahmad Saat, Nor Shazlina Zainal, Zaini Hamzah
    MyJurnal
    Ground water contain natural radioactivity associated with uranium and thorium that present naturally in rocks and soils. Humans may be exposed to the emission of energetic alpha particle from supported radon decaying process in this water when it is inhaled or ingested. Assessment of supported radon in ground water was carried out using fourteen ground water samples from Cameron Highlands. The measurement was accomplished by degassing the water samples using pump and then allowing the gas to flow into specially constructed 0.0191 m8 metal chamber. The activity concentration of supported radon in water sample was measured using continuous radon monitor inside the radon chamber. Measurement was carried out at one hour interval for twenty four hours. The hourly supported radon concentration was found to stabilize after about 8 hours. The stabilized concentration was used to determine supported radon activity concentration in the water samples. Results of the study show that depending on the sampling location, the activity concentrations of supported radon are in the range from 0.09 - 0.48 Bq/L which is lower than the activity concentration of radon in drinking water as proposed by USEPA (11 Bq/L).
  11. Ahmad Saat, Zaini Hamzah, Zaharidah Abu Bakar, Zuraidah A. Munir, Siti Mariam Sumari, Misbah Hassan
    MyJurnal
    A study was carried out to determine short term diurnal radon concentration at five locations in Malaysia. Two locations (KG & AP) are former tin mining areas that has been converted to housing area and training centre respectively, one a relatively new city (SA), that was formerly a rubber and oil palm plantation area, one older cities (KB) and one housing complex by the sea (LP). The study was carried out in 2005, 2006 and 2007 using a diffused-junction photodiode sensor continuous radon monitor. The monitor is recognized by the USEPA. In each location, measurements were carried out on at least ten sites. Former tin mining areas of KG and AP shows up to seven times higher indoor average than the average in the other three locations. However the indoor average in all locations is still below the action level of 4 pCiL-1. For outdoor, the former tin mining areas average concentration was higher than the global average of 0.4 pCiL-1. For the twenty four hours temporal variation the trend indicated that former tin mining areas concentration are always higher, and at time up to six fold higher. The hourly variation of all locations follows an identical trend of high concentration during early to late morning and drop in the afternoon till evening. The outdoor twenty four hour temporal average of former tin mining areas is consistently higher than the outdoor global average of 0.4 pCiL-1. The strong correlation between indoor and outdoor concentration at AP, indicates that indoor radon might originates from outdoor environment. The study was also extended to estimate the effective dose (mSvyr-1) of Rn-222 to the public.
  12. Ahmad Saat, Zaini Hamzah
    MyJurnal
    Clay has been regarded as very important natural industrial materials. All these industries exploit the properties that clay can be molded into any shape and fired to dry without losing its form. A study was carried out on clay samples from eight sites in the north-eastern part of Peninsular Malaysia. The study was accomplished by using X-ray diffraction (XRD) technique. The x-ray diffraction spectra obtained enable the determination of the lattice spacing associated with the types of clay and nonclay minerals present in the samples. Results of the study shows that the major components of clay minerals present in all samples studied are kaolinite and illite. The presence of kaolinite is confirmed by firing test in which the kaolinite diffraction peaks disappeared upon heating the samples at 600 o C. The presence of non-clay minerals such as quartz, mica, feldspar and chlorite are also observed.
  13. Ahmad Taufek Abdul Rahman, Ahmad Termizi Ramli, Abd. Khalik Wood
    MyJurnal
    Environmental radiation protection program is important in the effort to limit radiation dose to the public to be as low as reasonably achievable. As water is an important factor of transfer of radionuclide to human, therefore it is important to measure natural radionuclide concentrations in rivers. 20 water samples were collected randomly from the main rivers in Kota Tinggi district. The water samples collected were analysed using ICP-MS technique to determine uranium, thorium and potassium concentration in river water. Radionuclide concentrations obtained were compared with the terrestrial gamma radiation dose rate measured in the area. Significance of the results obtained is discussed.
  14. Ahmad Zahirani Ahmad Azhar, Hasmaliza Mohamed, Mani Maran Ratnam, Zainal Arifin Ahmad
    MyJurnal
    The microstructure and mechanical properties of ceramic composites produced from alumina, yttria stabilized zirconia and chromia oxide system was investigated. The Cr2O3 weight percent was varied from 0 wt% to 1.0 wt%. Each batch of composition was mixed, uniaxially pressed to 13mm diameter and sintered at 1600 ◦C for 4 h in pressureless conditions. Studies on the effects of the sample microstructures on their mechanical and physical properties such as fracture toughness and bulk density were carried out. Results show that an addition of 0.6 wt% of Cr2O3 produces the best mechanical properties. Furthermore, microstructural observations show that the Al2O3 grain size is significantly dependent on the amount of Cr2O3 additives used. Maximum value obtained with 0.6 wt % Cr2O3 for the fracture toughness is 5.36 MPa.m1/2.
  15. Ahmed, Al-Halemi, Jaafar, M.S.
    MyJurnal
    Radon-222 emanation from selected locally produced samples of building materials, used in Malaysia were measured using the Professional Continuous Radon Monitor Model 1027, which is a patented electronic detecting-junction photodiode sensor to measure the concentration of radon gas. Each sample was placed for 72 hours inside a 3.11 x 10 -2 m 3 sealed container. It was found that the average radon concentration Bqm -3 of air for concrete bricks, concrete brick with cemented coatings, concrete brick with cemented coatings and paint samples were, 303.7 Bq/m 3, 436.6 Bqm -3, and 410.7 Bqm -3, respectively. (Bqm -3 ) for brown clay brick, brown clay brick with cemented coatings, brown clay brick with cemented coatings and paint were 166.5 Bqm -3, 166.5 Bqm -3, and 148 Bqm -3, respectively. (Bqm -3 ) for sample of compact ceramic tile was 0 Bqm -3. The findings show that concrete brick samples are important source of radon emanation, while brown clay brick have been accepted as the recommendation of the U.S. Environmental Protection Agency (EPA), and ceramic tiles had no emanation of radon gas due to their compact surface, or the glazed layer created on the tile surface during the manufacturing process, which blocks radon emanation. A positive correlation between radon emanation and radium content has been observed for both brown clay brick and concrete brick samples whereas a negative correlation for ceramic tile has been observed. Consequently from the findings, in order to reduce radon emanation and radon exposure in house dwellings and in addition to EPA recommendation of sealed cracks and established good ventilation, we recommend concrete walls to be painted and concrete floors to be paved with ceramic tiles.
  16. Anuar Alias, Ithnin Abdul Jalil, Tajuddin, W.A.
    MyJurnal
    String theory is currently considered as the leading candidate for a unified theory of physics combining the Standard Model of forces and particles with gravity which is best described by Einstein theory of General Relativity. Contrary to classical model of point particle, String theory proposes that matter, force, even space and time are composed of tiny vibrating strings. This paper is to elaborate on the correspondence between string states and quantum fields by initially constructing general time-dependent states from string basis states analogous to general timedependent super-positions of basis states for a point particle. From this derivation we can show that an equation emerges from the 'classical' Schrodinger equation that represents the Schrodinger equation in String theory. This is very interesting to investigate since the Schrodinger equation is at the core of Quantum Mechanics which is the foundation of Standard Model that is the pillar of Nuclear physics.
  17. Asaad H. Ismail, Mohamad S. Jafaar
    MyJurnal
    The aim of this study is to design radon irradiation technique in the field of hematology for an invitro study. In addition, deposit of alpha particles into the human blood surface and its effects on the thrombocytopenia estimated using nuclear track detectors (NTDs). In this technique, amount of radon gas (2210±5.1Bq/m 3 ) collected in a tight PVC container with the appropriate engineering dimension using two sources of radium (5μCi). Blood samples (10 male and 10 female) and CR-39NTDs (40 pieces) are exposed to radon gas at various exposure time. Complete blood test and the computer scanning for each piece of CR-39NTDs before and after exposure has done. The results show that the present technique has a good efficiency (96%) to the invitro exposure of human blood. When the radon gas moved on the surface of blood sample, alpha tracks registered into CR-39NTDs. Thus, this technique improved that the comparative method to evaluate alpha particle density into exposure blood samples is an effective way; this depended on the geometry of design and the sensitivity of CR-39NTDs to track registration. Radon detector version 7 (RAD7) used to make a certain suitability of CR- 39NTDs. Amount of radon concentration losses during the exposure process, in the present work it was variable from 0.41% to 1.4%. Radon concentration effected on the thrombocytopenia; this depended on time of exposure and alpha energy loss into the blood and CR-39 through the atomic displacements. At the time of exposure of 10 minutes, rate of absorption dose was 2.255±0.11μSv (39%), and the platelet (PLT) cont reduced rapidly (high effected on reduce PLT, this makes thrombocytopenia.
  18. Asnor Azrin Sabuti, Che Abd Rahim Mohamed, Zaharudin Ahmad
    MyJurnal
    Various environmental samples (seawater, TSS, sediment, rainwater and fly ash) from eight different stations near Kapar coastal area were analyzed. The 210 Po activity concentrations in liquid samples (seawater and rainwater) varied between 0.34 ± 0.03 mBq L-1 to 22.44 ± 0.53 mBq L-1 . Whereas the concentrations in particulate samples (TSS, sediment and fly ash) varied between 43.79 ± 2.31 Bqkg-1 to 364.48 ± 5.43 Bqkg-1 . Results also showed the radioactivity in Kapar coastal is higher than most of Malaysian coast, reaching a factor of seven. This condition is mainly due to the operation of a coal-fired power plant nearby. This study also clarify the variability of 210 Po in environment was strongly influenced from rainfall events especially during wet seasons.
  19. Aspaniza Ahmad, Hutagalung, Sabar D.
    MyJurnal
    Silicon nanostructures have successfully been synthesized by thermal evaporation technique using nickel catalyst. Silicon powder served as starting source material was evaporated at high temperature (900-1100°C) in inert carrier gas. The grown silicon nanostructures were collected on (111) silicon substrate surface that positioned at varied location from source material. By controlling heating rate, gas flow rate, growth temperature and time, substrate position and location; to the optimum condition produced the best quality at silicon nanostructures. In this work, the best parameter to produce silicon nanostructures is system ramping up 1000°C at 20°C/min heating rate, N2 flow at 100ml/min; silicon needle-like one dimensional silicon nanostructures growth on vertically-positioned substrate located at 12cm from source material for 1 hour growth time. The effects of these parameters on the structures and physical of nanostructures were characterized by field emission scanning electron microscope and x-ray diffraction.
  20. Aziz Mohamed, A., Hafizal Yazid, Sahrim Ahmad, Rozaidi Rasid, Jaafar Abdullah, Dahlan, M., et al.
    MyJurnal
    L18 orthogonal array in mix level of Taguchi robust design method was carried out to optimize experimental conditions for the preparation of polymer blend composite. Tensile strength and neutron absorption of the composite were the properties of interest. Filler size, filler loading, ball mixing time and dispersion agent concentration were selected as parameters or factors which are expected to affect the composite properties. As a result of Taguchi analysis, filler loading was the most influencing parameter on the tensile strength and neutron absorption. The least influencing was ball-mixing time. The optimal conditions were determined by using mix-level Taguchi robust design method and a polymer composite with tensile strength of 6.33 MPa was successfully prepared. The composite was found to fully absorb thermal neutron flux of 1.04 x 105n/cm2/s with only 2 mm in thickness. In addition, the filler was also characterized by scanning electron microscopy (SEM) and elemental analysis (EDX).
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links