Displaying publications 1 - 20 of 95 in total

Abstract:
Sort:
  1. Ahmad Nazrul Abd Wahid, Shyful Azizi Abdul Rahman, Abdul Rahim Harun, Khairuddin Abdul Rahim
    MyJurnal
    This study was conducted to evaluatethe nitrogen use efficiency and 13C isotope discrimination of rice mutant lines viz.NMR151 and NMR152. Both cultivars are developed under rice radiation mutagenesis programme for adaptability to aerobic conditions. In the present study, NMR151 and NMR152 were grown under conditions of varying water potentials and nitrogen levels in a shade house. The rice mutant lines were planted on sandy loam soil. Three watering regimes and three nitrogen levels in a completely randomized design with three replications were carried out. The rice mutants were grown for 110 days under three water potentials, (i) Field capacity from 0 to 40 DAS and saturated from 41 to 110 DAS [ST], (ii) Field capacity from 0 to 110 DAS [FC], and (iii) Field capacity from 0 to 40 DAS and 70% of field capacity from 41 to 110 DAS [SS]. Direct 15N isotopic tracer method was used in this study, whereby the 15N labelled urea fertilizer 5.20% atom excess (a.e) was utilized as a tracer for nitroge nuse efficiency study (NUE)by the test crops. 15Nisotope presence in the samples was determined using emission spectrometry and percentage of total nitrogen was determined by the Kjeldahl method. 15N a.e values of the samples were used in the determination of the efficiency of N used by the mutant varieties. The 13C isotope discrimination (Δ13C) technique was used as a tool to identify drought resistance rice species with improves water use efficiency (WUE). WUE is the ratio of the biomass produced by the water consumed. For 13C discrimination analysis, a sample of rice leaf was analyzed for 13C content by using Isotope Ratio Mass Spectrometer (IRMS).The parameter, viz. plant height, number of tillers, grain yield, 1000 grain weight, NUE, Δ13Cand WUE were recorded. Results from this study showed nitrogen rates imparted significant effects on plant height, number of tillers, grain yield, 1000 grain weight and WUE, while water potentials had significant effects on plant height, grain yield, 1000 grain weight, NUE, Δ13Cand WUE. Δ13C has a low but significantly negative relationship with WUE. Rice mutants NMR151 and NMR152 were found to be not significantly different except for their NUE.
  2. Aida Nazlyn Nazari, Azhar Mohamad, Shuhaimi Shamsudin
    MyJurnal
    Assessing performance and genetic diversity of the wild material of oil palm is important for
    under- standing genetic structure of natural oil palm populations towards improvement of the
    crops. This in-formation is important for oil palm breeding programs, and also for continued exsitu
    conservation of the germplasm and breeding program in Malaysia. Mutation induction is one
    of the approaches in creating variants for selection in the breeding program. In this study, the
    effect of irradiated pollen towards pollen viability, bunches formation and number of
    parthenocarpic fruits were evaluated. Elaies guineensis Jacq. pollens were exposed to series of
    acute gamma radiation at dose 0, 10, 20, 40, 50, 100, 200, 300, 500, 100 and 2000 Gy . Pollen
    viability and pollen tube formation were disrupted in which unable the pollen to reach the ovule.
    At this stage, embryo was aborted towards formation of parthenocarpic fruits and rotten bunches.
    The study suggested that at low levels of irradiation i.e. < 200 Gy, generative nucleus partially
    damage and it is still maintaining capacity of fertilizing the egg cells for hybridization. It is
    important for breeders in understanding this finding towards novel variants of oil palm via
    mutation induction
  3. Arwinder Singh, Lee Sing, Saw, Sor Heoh
    MyJurnal
    In this paper a study on the relationship between axial speed va, radial shock speed vs, piston speed
    vp and pinch temperature with the variation of pressure P0 was carried out. The Lee’s 5 phase
    model code was used in this study by configuring the India Bhabha Atomic Research Center
    (BARC) plasma focus machine to operate in the pressure (P0) range from 1 Torr to 14 Torr. The
    relationships between these parameters were obtained as follows:

    Va ≈ 9Po-0.37, Vs ≈ 45P0-0.48, Vp ≈ 30P0-0.47 and Tpinch(max) ≈ 11P0-1
  4. Fadzil, M.S.A., Mohd Noor, N., Tamchek, N., Ung, N.M., Alawiah, A., Abdullah, N., et al.
    MyJurnal
    The thermoluminescence kinetic parameters of Ge-doped flat fibre have been investigated comprehensively using the computerized glow curve deconvolution analysis. The Ge-doped flat fibre was irradiated to 6 MV and 10 MV photon beam with dose ranging from 100 cGy to 300 cGy. Analysis was done using WinGCF software on the dependence of the glow curve intensity on dose delivered and the determination of the trap parameters. Ge-doped flat fibre was found to be linear over the entire dose range explored for both 6 MV and 10 MV irradiations with r2 value of 0.9955 and 0.9933 respectively. The glow curve consists of five individual glow peaks. The peak height increases with increasing irradiation dose. The first peak (P1) is a dominant individual peak for low temperature peak (LTP) with the maximum temperature ranging from 167.4°C to 179.0°C for both beams studied. Meanwhile, peak (P4) is a dominant individual glow curve for high temperature peak (HTP) with maximum temperature for 6 MV and 10 MV and is observed between 264.5°C to 279.4°C. Peak 1 has the lowest activation energy which is less than 0.72 eV while peak 2 shows the highest activation energy (1.3 eV < Ea < 2.1 eV) which indicates the deepest electrons trap. The results showed that the peak integral will increases as the dose increases. The Ge-doped flat fibre demonstrated the second-order kinetic peak behavior by exhibiting the symmetric shape of the glow curve with high temperature half of the curve slightly broader than the low temperature half, which suggests the possibility of electron retrapping.
  5. Faiz Ahmad, Zaiton Ahmad, Affrida Abu Hassan, Sakinah Ariffin, Norazlina Noordin, Shakinah Salleh, et al.
    MyJurnal
    The research on radiation induced mutation has been conducted as one of the promising method of plant breeding in Malaysia since 1980s. Nuclear Malaysia is leading research institute inMalaysia conducting plant mutationbreeding research. Gamma Greenhousefacility located in Nuclear Malaysiais one of the irradiation facilitiesto serve as a chronic irradiation facility for inducing mutation in various organisms including plants, fungi and microbes.Chronic irradiation refers to the exposure of materials at a lower dose rate over a long period of time. Previous studies have shown that this type of irradiation can minimize radiation damages to living materials and produces a wider mutation spectrum, therefore is very useful for trait improvements in irradiated organisms. Experiments on induce mutation using Gamma Greenhouse facility for crop improvement program have been conducted since its first operation in 2009. Various plant species including ornamental and herbal plants, food crops and industrial crops have been irradiated to improve their traits such as higher yield and biomass, pest and disease tolerance, higher bioactive compounds, longer bloom time and many others. Most of these crop improvement programs were done through collaborations with other agencies in Malaysia such as universities, research institutes and government departments. A number of publications on crop improvement using Gamma Greenhouse have been published inlocal and international journals as well as seminar presentations at national and international levels. The outputs from induced mutation via chronic radiation using Gamma Greenhouse could be of great interest for plant breeders dealing with improvement and development of new cultivars. This paper discusses the activities and achievement in plant breeding and improvement using Gamma Greenhouse Facility in Malaysia.
  6. Fatema Anuar, Mohammed Iqbal Shueb, Ruzitah Mohd Salleh, Nazaratul Ashifa Abdullah Salim, Julia Abdul Karim
    MyJurnal
    Mechanical properties of blended polyethylene (PE) containing the antioxidant Irganox 1010 and the UV-absorber Tinuvin 326 were studied for future use as radiation capsule material for the TRIGA Mark II research reactor. High density and low density polyethylene were blended with the additives and tested for elongation at break, impact strength and gel content, before and after irradiation inside the nuclear reactor. Characterization via FTIR as well as determination of crystallization and melt transition temperatures through DSC were also conducted. It was found that the addition of the antioxidant at different amounts (from 0 to 4 phr) had various effects on the properties of the blended PE, with 0 phr being the amount at which there was the biggest increase in elongation at break and impact strength, post-irradiation.
  7. Hoe, Phua Choo Kwai, Khairuddin Abdul Rahim, Ahmad Nazrul Abd Wahid
    MyJurnal
    Development of biofertilizer seed treatments for okra seeds were carried out by mixing phosphate
    solubilising bacteria (AP 3) and plant growth promoter (AP 2) with adhesives. The seeds were
    coated with inoculums and four types of adhesives namely, Gum Arabic; Polyethylene Glycol
    (PEG); Sodium Alginate and Methycellulose respectively. From eight seed treatments, all seed
    treatments significantly increased seed germinations except treatment T4 (Gum Arabic and AP3).
    In general, maximum germination rates and log of viable cells were observed when treated with
    polyethylene glycol 4000 (PEG) mixed with AP2 (T7) and AP3 (T8). These results show that using
    PEG as adhesive enhanced the germination rates and log of viable cells of AP2 and AP3. Thus,
    PEG could be a good adhesive for seed treatment. In greenhouse experiment, okra seeds treatment
    with AP2 and PEG (T1) showed the highest dry weight compared to other treatments. Seeds
    treatment with AP3 and PEG (T2) showed higher contribution of N compare to seeds treatment
    (T1). There were no significant different within seed treatments and urea treatment in okra yield.
    All treatments significantly increased yields compared with control
  8. Husaini Salleh, Supian Samat, Mohd Khalid Matori, Muhammad Jamal Md Isa, Mohd Ramli Arshad, Shahrul Azlan Azizan, et al.
    MyJurnal
    Heel Effect is the well known phenomena in x-ray production. It contributes the effect to image
    formation and as well as scattered radiation. But there is paucity in the study related to heel effect.
    This study is for mapping and profiling the dose on the surface of water phantom by using mobile
    C-arm unit Toshiba SXT-1000A. Based on the result the dose profile is increasing up to at least
    about 57% from anode to cathode bound of the irradiated area. This result and information can be
    used as a guide to manipulate this phenomenon for better image quality and radiation safety for
    this specific and dedicated fluoroscopy unit.
  9. Ibrahim, I., Abdul Manan, M.J., Kamaruddin, H.
    MyJurnal
    Haruan or Channa striatus is source of protein that is widely consumed in the region and its extract
    is well known for having medical values. It is of great advantage if this product could be taken
    orally rather than by injection because the oral route of drug delivery is still preferred by the vast
    majority of patients. However protein and peptides can be denatured or degraded by the acidic pH
    of the stomach and the presence of endogenous enzymes. In order to protect or prevent digestion
    and degradation of the protein in the stomach and to ensure the protein reaches the gastro
    intestinal (GI) tract, Carboxymethyl Starch (CMS) nanogel system was developed using electron
    irradiation method. However stability of HTE during the irradiation process needed to be studied
    before being developed further. In this study, the HTE was irradiated using electron beams. Its
    stability was analysed in terms of physical and chemical changes by looking at colour difference,
    melting point by using Differential Scanning Calorimetry (DSC) and molecular bonds by using
    Fourier Transform Infrared (FTIR) respectively. The results of this study were that no apparent
    colour difference was observed with HTE before and after irradiation. These observations were
    supported by the FTIR and DSC results that showed that there were no changes in molecular bonds
    and melting point, compared between no irradiation and irradiation HTE during electron
    irradiation up to 10 kGy. Statistically the test showed no significant difference at p < 0.005 between
    melting temperatures.
  10. Ismail Mustapha, Samihah Mustaffh, Md Fakarudin Ab Rahman, Roslan Yahya, Lahasen @ Norman Shah Dahin, Nor Pa’iza Mohd Hasan, et al.
    MyJurnal
    Non-destructive and real time method becomes a well-liked method to researchers in the oil palm
    industry since 2000. This method has the ability to detect oil content in order to increase the
    production of oil palm for better profit. Hence, this research investigates the potential of neutron
    source to estimate oil content in palm oil fruit since oil palm contains hydrogen with chemical
    formula C55H96O6. For this paper, oil palm loose fruit was being used and divided into three
    groups. These three groups are ripe, under-ripe and bruised fruit. A total of 21 loose fruit for each
    group were collected from a private plantation in Malaysia. Each sample was scanned using
    neutron backscattered technique. The higher neutron count, the more hydrogen content, and the
    more oil content in palm oil fruit. The best correlation result came from the ripe fruits with r2=0.98.
    This research proves that neutron backscattered technique can be used as a non-destructive and
    real time grading system for palm oil.
  11. Ismail Sulaiman, Khairuddin Mohamad Kontol, Faizal Azrin Abdul Razalim, Azman Jaafar
    MyJurnal
    The objective of this study was to measure indoor radon concentrations in the expected high risk area around Ipoh in Kinta Valley, Perak. The area was chosen based on its own special characteristics. The measurements were carried out by means of long term exposure (3 months) using CR-39 solid state nuclear track detector. The mean indoor radon concentration in Ipoh was 45 Bq/m3 which is equivalent to effective dose of 1.1 mSv/y. This value was higher compared to low or normal area in Bangi, Selangor but comparable to the world average value reported by UNSCEAR. The maximum value of indoor radon concentration measured was 87 Bq/m3.
  12. Ismail Sulaiman, Khairuddin Mohamad Kontol, Faizal Azrin Abdul Razalim
    MyJurnal
    The indoor and outdoor radon concentrations in Cameron Highlands (Peninsular Malaysia) and Ranau (East Malaysia) were measured. The measurements were carried out using passive method based on CR-39 solid state nuclear track detector (SSNTD) (for indoor measurements in Cameron Highlands) and active method using continuous radon/thoron progeny monitor (for indoor and outdoor measurements in Ranau and outdoor measurements in Cameron Highlands). The mean indoor radon concentrations in Cameron Highlands and Ranau were 50 Bqm-3 and 1.5 Bqm-3, respectively. The mean indoor radon concentration in Cameron Highlands was slightly higher compare to the world average. The maximum value recorded was 97 Bqm-3 which is almost similar to WHO reference level. The mean outdoor radon concentrations in Cameron Highlands and Ranau were 7.4 Bqm-3and 1.7 Bqm-3, respectively. The outdoor concentrations were low and comparable to world outdoor average.
  13. Jaafar Abdullah, Roslan Yahya, Lahasen@Norman Shah Dahing, Hearie Hassan, Engku Mohd Fahmi Engku Chik, Mohamad Rabaie Shari, et al.
    MyJurnal
    “Batu Bersurat Terengganu (inscribed stone)” is the oldest artifact with Jawi writing on it. The
    artifact proves that the Kingdom of Terengganu exist earlier than 1326 or 1386. To date, a lot of
    studies on the content of the inscription have been carried out by historians and archaeologists, but
    no scientific investigation about the material composition and its provenance has been performed.
    This paper focuses on the study of the origin of the Batu Bersurat Terengganu using NeutronInduced
    Prompt Gamma-Ray Techniques (NIPGAT). Portable NIPGAT system has been designed
    and developed based on volumetric measurement methods and it will be considered as a nondestructive
    testing. The system uses low activity of californium-252 (Cf-252) neutron radioactive
    sources, gamma ray spectroscopy and special computer software to carry out the investigation. The
    study found that the Batu Bersurat Terengganu is made of dolerite based on the elemental
    composition of the stone. Although most of the scientific data for the study of the origin are already
    obtained, but further research is still ongoing to complete the scope of this study.
  14. Khairiah Yazid @ Khalid, Roslan Yahya, Nadira Kamarudini, Mohd. Zaid Abdullah, Mohd Ashhar Khalid, Abdul Aziz Mohamed
    MyJurnal
    Detection and analysis of resin is particularly significant since the commercial value of agarwood is related to the quantity of resins that are present. This article explores the potential of a scanning electron microscope in combination with new non-destructive 3D visualization technique, X-ray micro-computed tomography, as imaging tools to visualize micro-structure resin in agarwood. These techniques were used to compare two samples of agarwood chips: high grade and low grade. From the results, it can be concluded that a wood cell filled with resin deposit have a higher attenuation. It can be shown that the combination of scanning electron microscopy and micro-CT can offer high resolution images concerning the localization and structure of resin inside Agarwood. While the second allows the 3D investigation of internal structure of agarwood, the first technique can provide details 2D morphological information. These imaging techniques, although sophisticated can be used for standard development especially in grading of agarwoodlbr commercial activities.
  15. Khairuddin Mohamad Kontol, Ismail Sulaiman, Faizal Azrin Abdul Razalim
    MyJurnal
    Sludge and scales produced during oil and gas production contain enhanced naturally occurring
    radioactive material (NORM). Sludge and scales are under the jurisdiction of Department of
    Environment (DOE) and also Atomic Energy Licensing Board (AELB). AELB has issued a
    guideline regarding the disposal of sludge and scales as in its guideline (LEM/TEK/30 SEM.2,
    1996). In this guideline, Radiological Impact Assessment (RIA) should be carried out on all
    proposed disposals and has to demonstrate that no member of public will be exposed to more than
    1 mSv/y. This paper presented RIA analysis using RESRAD computer code for the disposal of
    treated sludge. RESRAD (RESidual RADioactive) developed by Argonne National Laboratory is to
    estimate radiation doses and risks from residual radioactive materials. The dose received by the
    member of public is found to be well below the stipulated limit.
  16. Khairuddin Mohamad Kontol, Ismail Sulaiman
    MyJurnal
    A study to determine whether Radiological Impact Assessment (RIA) is needed for landfill disposal of treated sludge (slag) from oil and gas industries has been carried out. Radioactivity level of slag and soil samples have been measured using gamma spectrometry system and its Total Activity Concentration (TAC) has been calculated. It was found that TAC (inclusive background) was within the control limit set by the AELB i.e. 3 Bq/g as stipulated in LEM/TEK 58 (AELB, 2009). Therefore, as a result from this study, RIA is not required and the allocated area can be used for the landfill disposal of treated sludge (slag).
  17. Khomsaton Abu Bakar, Selambakkannu, Sarala, Jamaliah Sharif, Khairul Zaman Mohd Dahlan, Ming, Ting Teo, Natasha lsnin, et al.
    MyJurnal
    The combination of irradiation and biological technique was chosen to study COD, BOD5 and colour removal from textiles effluent in the presence of food industry wastewater. Two biological treatments, the first consisting a mix of non irradiated textile and food industry wastewater and the second a mix of irradiated textiles wastewater and food industry wastewater were operated in parallel. Reduction percentage of COD in textiles wastewater increased from 29.4% after radiation to 62.4% after further undergoing biological treatment. After irradiation, the BOD5 of textiles wastewater was reduced by 22.1%, but reverted to the original value of 36mg/1 after undergoing biological treatment. Colour had decreased from 899.5 ADMI to 379.3 ADM1 after irradiation and continued to decrease to 109.3 ADMI after passing through biological treatment.
  18. Ligam, Alfred Sanggau, Zarina Masood, Mohd Fairus Abdul Farid, Ahmad Nabil Abd Rahim, Nurhayati Ramli, Mohammad Suhaimi Kassim
    MyJurnal
    Radiation Monitoring System aims to limit the exposure dose to personnel to the lowest level
    referring to the concept of ALARA (As Low As Reasonably Achievable). Atomic Energy Licensing
    (Basic Safety Radiation Protection) Regulations 2010 is useful to control employee and public
    radiation protection program and guideline. This paper discussed the methodology and
    implementation of the radiation protection program at PUSPATI TRIGA Reactor (RTP) which is
    implemented in Nuklear Malaysia, Complex Bangi.
  19. Lombigit, Lojius, Maslina Ibrahim, Nolida Yusup, Nur Aira Abdul Rahman, Yong, Chong Fong
    MyJurnal
    Pulse Shaping Amplifier (PSA) is an essential component in nuclear spectroscopy system. This
    amplifier has two functions; to shape the output pulse and performs noise filtering. In this paper,
    we describe the procedure for the design and development of a pulse shaping amplifier which can
    be used in a nuclear spectroscopy system. This prototype was developed using high performance
    electronics devices and assembled on a FR4 type printed circuit board. Performance of this
    prototype was tested by comparing it with an equivalent commercial spectroscopy amplifier (Model
    Silena 7611). The test results showed that the performance of this prototype was comparable
    to the commercial spectroscopic amplifier.
  20. M. Fahmi M. Yusof, Nornashriah A. Rashid, Reduan Abdullah
    MyJurnal
    The glow curve in TLD-100 was compared by applying long preheat time, short preheat time
    techniques and without preheat technique before the TLD readout. Fading effect of the TLD signal
    upon certain storage time with long preheat time (100°C, 10 minutes using the oven) and short
    preheat time techniques (100°C, 10 seconds using the reader) were also studied. 15 TLD-100 chips
    were used with 3 of the TLD chips were used for measuring background radiation. 12 TLD chips
    were annealed, irradiated, preheated long and short preheat time techniques) and analyzed. The TL
    signals output from TLD chips of without preheated were used as the control. Two sets of data were
    taken using TLD chips irradiated with 6 MV and 10 MV photon beams. TL signal output was
    recorded the highest for short preheat time, followed by long preheat time and no preheating. The
    TL signal loss upon certain storage time was also reduced when short preheat time technique was
    applied. By applying long preheat time technique the low temperature peak in the glow curve was
    completely removed for both energies. Whereas, TLD chips exposed to 6 MV and with short preheat
    time technique the low temperature peak did not disappear completely but decreased in intensity as
    compared to the control data by 19.80%, 37.69%, 48.19% and 100% at 24, 48, 72 and 96 hours
    after exposure prior to readout, respectively. Meanwhile, for 10 MV photon beam with short
    preheat time, the small peak intensity was reduced by 19.58% for readout at 24 hours after
    irradiation and 100% for 48,72 and 96 hours delayed time prior to readout. It was observed that
    the TLD-100 was highly dependent on preheat heating time before readout. Short preheat time
    technique was able to reduce post irradiation fading of TLD-100 dosimeters
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links