Zamzam is holy water believed by Muslim to have remedial power for all kinds of diseases. It contains
many electrolytes and the concentration of the electrolytes may be affected by the types of container
used for its storage. This study was carried out to determine the difference in ions concentration of
Zamzam water stored in plastic and glass containers, and to determine cytotoxicity effects of Zamzam
water against U-87 cell line (human primary glioblastoma cell line). Ion Chromatography (IC) was used
to analyze the concentration. The analyzed anions in the Zamzam water include bromide, chloride,
phosphate, nitrite, nitrate, sulfate and fluoride whereas the cations were ammonium, lithium, potassium,
sodium, calcium and magnesium. Subsequently, MTT assay was used to determine the cytotoxicity of
Zamzam water on U-87 cell line. This study reveals that Zamzam water anions and cations
concentration was not statistically significant neither in plastic nor glass container. In addition, the
Zamzam water did not cause any toxicity on the U87 cell line. We postulate that types of container do
not have much influence on the ion concentration of Zamzam water and it is non-toxic on U87 cell line.
Recent evidence has exhibited dietary influence on the manifestation of depressive-like behaviour induced by stressor tasks. The present study examined the effects of Tualang honey supplement administered with the goal of preventing or attenuating the occurrence of depressive-like behaviour in male rats subjected to noise stress. Forty-eight adult male rats were randomly divided into the following groups: i) nonstressed with placebo, ii) nonstressed with honey, iii) stressed with placebo, and iv) stressed with honey. Tualang honey (200 mg/kg body weight) was administered for 28 days. Stressed rats were subjected to loud noise 100 dB(A) 4 hours daily for 14 days. Forced swimming test was performed to evaluate depressive-like behaviour. Stressed control rats displayed significant increase in depressive-like behaviour, serum adrenocorticotropic hormone (ACTH), corticosterone, and brain oxidative stress markers levels, with significant decrease in antioxidant enzymes activities and total antioxidant status. Honey supplementation successfully counteracted the stress effects whereby the honey treated rats exhibited significant decrease in depressive-like behaviour and levels of ACTH, corticosterone, and oxidative stress markers, with significant increase in antioxidant enzymes activities and total antioxidant status. In conclusion, Tualang honey mediated antidepressant-like effects in stressed rats, possibly acting via restoration of hypothalamic-pituitary-adrenal axis through its antioxidant properties.
Surface water quality is an important environmental factor affecting both humans and other living things.
This present study is purposely to provide a baseline information on physicochemical parameters and
metals concentration from surface water of Kenyir Lake and their water quality status. Determination of
metals concentration was carried out using ICP-MS. The mean physicochemical parameters were 31.14°C
(Temp), 16.29mg/L (TDS), 27.79µS/cm (COND), 4.75mg/L (DO), 7.03 (pH), 1.33NTU (TUR), 0.96mg/L
(BOD), 6.48mg/L (COD), 0.11mg/L (AN), 2.17mg/L (TSS) and 227.10mV (ORP) while the mean
concentration of metals (µg/L) Al 23.0845, As 0.2983, B 4.1711, Ba 5.0655, Ca 2033.4024, Cu 1.7407, Fe
43.7747, K 916.9054, Mg 456.7255, Mn 4.7387, Ni 0.3346, Se 0.5032, V 0.1428 and Zn 1.6796 respectively.
The results revealed that physicochemical parameters and metals concentration at all sampling stations
near Kenyir Lake are within Class I and Class II of Malaysia National Water Quality Standard (NWQS)
except for dissolved oxygen (DO) that was classified into Class III and Class IV due to high activities of
microorganisms that uses up a great amount of oxygen to carry out their metabolizing activities as well as
degradation of organic matters. Furthermore, most metals are significantly correlated to each other (p˂0.05)
which may derive from a common source of metals except for Al and Cu, As and Fe, Ba and Ca, Ca and
Cu, Ca and Se, Ca and Zn, Cu and Fe, Cu and Mn, Cu and Ni, Cu and Se, Cu and Zn, Fe and Ni, Fe and
Se, Fe and Zn, Mn and Zn and V and Zn respectively. Therefore, data from the present study will be useful
as baseline data for future reference.
This paper is aimed to evaluate the concentration of some heavy metals in order to assess the temporal
variation, Contamination Factor (CF) and Pollution Load Index (PLI) in the soil along the airport road of
Kano State. Soil samples were collected during 2009 and 2015 using the composite sampling
techniques. 10 samples were collected in each period and then analysed using the standard laboratory
procedures. The findings revealed that the mean values of Mn (52±7.2), Fe (281±19.4) and Cd (3.0±0.3)
were found to be higher in 2009 soil samples. The mean value of Cu (100±16.3), Zn (161±47.7), Cr
(20.8±1.5), Ni (53.9±9.7) and pH (9.0±0.56) were found to be higher in 2015 soil samples. The CF value
shows that the collected soils of the sampling area have low contamination level and moderately
contaminated with Cd. The soils samples also have been classified as low pollution level according to
the PLI. The finding has concluded that there is gradual accumulation of Cu, Zn, Cr and Ni with reduction
in Mn, Fe and Cd. The collected soils have low contamination level with selected heavy metal except
Cd that moderately contaminates the soil of the area according to contamination factor. The PLI values
of the heavy metals during 2009 and 2015 are 0.0006 and 0.02 respectively, indicating the increases in
pollution load from 2009 to 2015 in the study area. Proper soil management such as the increase of pH
and organic matter as well as the avoidance of using contaminated water for irrigation were
recommended in the sampling area.
The purpose of this study is to determine spatial pattern recognition of school performance based on
children’s anthropometric and motor skills component. This study involved 94 primary schools with a
total 2237 male students aged 7.30±0.28 years in Pahang, Malaysia. The parameters of anthropometric
(weight and height) and motor component included lower muscular power (standing broad jump),
flexibility (sit and reach), coordination (hand wall toss) and speed (20 meter run) were selected. Cluster
Analysis (CA) and Discriminant Analysis (DA) under Multivariate Method and technique of Kriging
Interpolation in Geographic Interpolation Software (GIS) were used. CA revealed two clusters of school
performance. There are a total 34 high performance schools (HPS) and 60 low performance schools
(LPS). Then, the assigned groups were treated as independent variable (IV) while anthropometric and
motor parameters were treated as dependent variable (DV) in DA. Standard mode of DA obtained
95.74% correctness of classification matrix with three discriminated variables (height, standing broad
jump and 20 meter run) out of six variables. Meanwhile, forward and backward stepwise mode of DA
discriminated only one (standing broad jump) out of six variables with 96.81% of classification
correctness. The map output of Kriging interpolation has shown graphically the pattern of discriminated
variables that greatly influence school performance. It exposed the ability of children motor skills
development in particular region is higher than another region.
Food additives may come from natural and chemical sources. In some countries, this ingredient is coded
into e-numbering system. E-Number identifies the additive substance, and it can be used to determine
its possible sources hence the halal status and its value for health. However the use of scientific name
or the coded number is confusing to consumers. This article presents an android-based mobile
application that provides a database access to the detailed information about the additives. Information
retrieval is done based on rule-based technique. The application also offers customer profiling services
whereby upon user registration and sharing current health conditions, the consumer will be provided
with extra information on the possible consequences of consuming the food. The system prototype
system was analysed for the usability in terms of user satisfactions using System Usability Scale (SUS).
The user satisfaction is rated from good to excellent according to SUS score in the range of 70%-80%.
The application is expected to increase consumers’ awareness of choosing the right food that is halal
and healthy.
Number of active smokers in Malaysia is increasing despite availability of stop smoking clinics and smoking cessation medications. Thus, the practice of the healthcare professionals involved in providing smoking cessation intervention using evidence-based guidelines needs to be assessed using validated assessment tool. Newly invented reliable and valid questionnaire locally is needed. This study aimed to develop and validate a newly modified questionnaire to assess the knowledge, attitude and practice of medical doctors based on national smoking cessation guidelines and factors contributing to the score. The 22 items consists of true/false questions and Likert scaling response based on domain of 5A’s (ask, assess, advice, assist, arrange) and 5R’s (relevant, risks, rewards, roadblocks, repetitions) of the national stop-smoking guideline. Sample size is calculated based on five respondents to one item ratio. The questionnaires were distributed to 131 primary care doctors. Reliability was determined using Cronbach’s alpha for internal consistency while construct validity was assessed using factor analysis. A high degree of internal consistency was observed (Cronbach’s alpha = 0.87), with good knowledge subscale (0.72), attitude subscale (0.58) and practice subscale (0.92). Factor analysis showed three meaningful finalized components (knowledge, attitude and practice) which represent the smoking cessation framework. This study indicates that this revised questionnaire is more reliable and valid tool to assess the knowledge, attitude and practice on stop smoking guidelines compared to previous questionnaire.
Assessing the repeat rate is crucial to reduce unnecessary dose to the patient by identifying the major cause for repeating the x-rays exposure to the patient and apply corrective measures. To analyse the repeat rate of routine lower limb projections in direct digital radiography (DR) from general radiology department of Pantai Klang Hospital. 26 months retrospective repeated radiograph was acquired from Picture Archiving and Communication System (PACS) at Hospital Pantai Klang. The retrieved radiographs were grouped based on the reason for the i radiographs being rejected which are incorrect positioning, incorrect collimation, patient movement, incorrect exposure factors, artefact, and other reasons. Total repeated radiographs retrieved for basic lower limbs projections were 13616. Knee was the highest repeted examination and the lowest repeat rate was tibia fibula. (repeat rate: knee = 1.04%, tibia fibula = 0.57%). incorrect positioning is the major causes for repeat exposure for all examinations type, followed by incorrect collimation, other categories, centring ray error, incorrect exposure factors and artifact.
Over the past century there has been a dramatic increase in the number of road accidents in
Malaysia. Hence, it is necessary to create a decision making method which can consider various
preferences and criteria in order to identify the main causes of the accidents. This paper proposes an
Interval Type-2 Fuzzy Technique for Order Preference by Similarity to Ideal Solution (IT2FTOPSIS)
method which provides a comprehensive valuation from experts. This method is developed based on
the aggregation of experts’ opinions on preferred causes of road accidents. The extended
IT2FTOPSIS employs a linguistic scales of positive and negative Interval Type-2 Trapezoidal Fuzzy
Number (IT2TrFN) and hybrid averaging approach (from an ambiguity and type-reduction methods) to
formulate a collective decision environment. Three authorised personnel from three Malaysian
Government agencies were interviewed where they were asked to rank the causes. The analysis
shows that the linguistic scales of positive and negative Interval Type-2 Trapezoidal Fuzzy Number
(IT2TrFN) and hybrid averaging approach are effective in measuring the uncertainties in the
interviewees’ responses. Thus this paper concludes that the extended IT2FTOPSIS is more aligned
with the users’ decisions compared to the earlier IT2FTOPSIS.
Many researchers have focused chitosan as a source of potential bioactive material during the past few decades. However, chitosan has several drawbacks to be utilised in biological applications, including poor solubility under physiological conditions. Therefore, a new interest has recently emerged on partially hydrolysed chitosan, chitosan oligosaccharides (COS). In this study, degradation of chitosan was performed by Cellulase from Trichoderma reesei® 1.5L and Response Surface Methodology (RSM) were employed to optimize the hydrolysis temperature, pH, enzyme concentration and substrate concentration. Optimization of cellulase T. reesei® using central composite design (CCD) was to obtain optimum parameters and all the factors showed significant effects (p˂0.05). The maximum response, Celluclast® activity (1.268 U) was obtained by assaying the process at 49.79oC, pH 4.5, 3% (v/w) of enzyme concentration and 25% (w/v) concentration of chitosan for 24 hours.
Awareness of haze pollution and management increased in Southeast Asia since 1990. However, the
focus on environmental management is decreasing especially in Malaysia due to the abundant
resources and increased development pressure. The total health damage cost because of haze in the
country became significantly high due to the long duration of haze events year by year. This paper
discusses the health damage caused by bronchitis due to the haze events in Malaysia. The analysis
shows positive coefficient of independent variables which indicates the positive relationship between
dependent variable and independent variables. Multiple linear regression analysis shows that 45.3%
variation in damage cost of bronchitis could be explained by FAI, GDPPC, and CO2.
In the current study, a total of 86 soccer’s players with mean age of 14 years drawn from Terengganu soccer academy were tested in performing 10 parameters aiming at determining the performance of those players based on assessing the contribution of each activity and its corresponding significant level. The 10 performance related parameters involved anthropometry (BMI), fitness test (agility, coordination, muscular endurance (push and sit up), power, YoYo level), and football skill test (dribbling with ball, dribbling without ball and juggling). All the parameters testing is carried out based on international standard and performed by well-trained staff. The Pearson correlation analysis was used to achieve the objective in this study. Result shows a positive correlation between the two types of muscular parameters; the power is influenced by BMI and coordination; the specific football tests are highly impacted by the power and agility. The coefficient of determination R^2 and the significance level p-values show that the parameters that can be significantly considered are the anthropometric BMI (0.020), agility (0.025), muscular endurance (0.039 and 0.043), power (0.039), special football test without the ball (0.041), and juggling (0.046). The coordination, YoYo, football special test with the ball were not found to be significantly accounted for preparing the young players to achieve the required performance. Based on the results of the coefficient of determination and the significance p-values of the parameters, a model was proposed to determine the highest and lowest parameters that play important roles in the selection of young players.
The study of Representative Volume Element (RVE) on Composite Material has been performed in the aim to obtain the relation and effect of fiber volume fraction on its tensile properties which is one of the important mechanical properties for composite designers in automotive and aerospace community.The properties such as fibre content, orientation, dimension of constituent fibres (diameter), level of intermixing of fibres, interface bonding between fibre and matrix, and arrangement of fibres between different types of fibres, influences the mechanical properties of hybrid composite.Representative Volume Element (RVE) for each constituent Carbon Fiber Reinforced Polymer (CFRP) and Glass Fiber Reinforced Polymer (GFRP) assumed isotropic behavior for carbon fibre, glass fibre and epoxy resin matrix and assumed to be perfectly bonded interface between fibre and matrix region i.e. strain compatibility at the interface. The scope of study on the micro mechanical modelling via representative volume element (RVE) is limited only to unidirectional composites.The result of parametric study performed deduces that incremental volume fraction of carbon and glass respectively will increase the E11 (Modulus of Elasticity in Tensile Direction) and enhance the tensile properties of both CFRP and GFRP.
This study was conducted to optimize the production of spray-dried white dragon fruit (Hylocereus undatus) powder using resistant maltodextrin as wall material. The inlet air temperature (140 °C, 150 °C and 160 °C), outlet temperature (75 °C, 80 °C and 85 °C) and resistant maltodextrin concentrations (20%, 25% and 30%) were tested as independent variables. Process yield, moisture content, water activity, solubility, hygroscopicity and bulk density of the powders were analysed as responses. Process yield significantly (p
This study describes the review on maintenance related issues during design and construction stage
within construction industry. The paper highlights the causes and errors made during design and
construction stage and their impact during the operation/production/occupancy stage as well as the
maintenance costs associated with it. The study identifies the mistakes in the working processes within
design and construction stage leading to the errors that affect the durability, performance, reliability,
maintainability, availability and safety of the systems. The paper presents a comprehensive review of
the published literatures, journals, technical papers in the related areas in the construction field. The
review highlights the new approaches and decision framework which link the designers and
construction personnel that could reduce the errors and defects in construction which then lead to
maintenance issues and asset management. The factors of accessibility, materials, design and
documentation standardization have been discussed thoroughly for better understanding in improving
maintenance and physical asset management in project commissioning.
The use of hybrid composite has increased due to their special mechanical and physical properties.
However, machining of composite materials is extremely difficult due to non-homogeneous,
anisotropic and highly abrasive characteristics. The performance of machined surface quality of
CFRP/Al2024 was described using two level full factorial methodology. Trimming test was performed
under dry conditions using 6mm diameter of burr tools end mills. The factors investigated were spindle
speed(N), feed rate(fr) and depth of cut(dc), furthermore Ra CFRP and Ra Al2024 were the response
variables. This work aims to minimize the machined surface quality of CFRP/Al2024 between 1µm to
2µm. The finding of this empirical study has shown that, the best estimated value of fr should be 500
mm/min to 530 mm/min, N is between and 2313.870 rpm to 2336.042 rpm. For both response spindle
speed is the most significant effect followed by Feed rate and Depth of Cut.
The purpose of this case study is to look at how “Lean Techniques and Principles” can be successfully introduce and implement in the higher education institution or university context. In the last two decades, Lean techniques and principle has been applied to improve production system in manufacturing processes. Lean was introduced in the 1950s by Womack and Jones known as the Toyota Production System (TPS) by the legendary car manufacturer Toyota, the world’s most profitable automaker and have spent decades perfecting lean practices in the production. The method used was to produce more productivity while using fewer resources and identifying activities which creates value for customers, activities which do not create value but are required and actions which do not create value and can be eliminated. This case study demonstrates how “Lean Principles” can be adopted to the administration services particularly in the registration process for new student intake in USIM. The objective of this case study includes : to identify the needs of improving the registration process by eliminating the waste (Muda) such as time wastage, human resource wastage, to introduce the apparatus required to reduce and eliminate waste, to redesign the process using the lean techniques and principles to eliminate waste and to continually improve the process with the goal to achieve perfection for customer satisfaction and university’s reputation. How Lean Principles can transform the work process in the registration procedure, process efficiency, the reasons for implementing Lean in the process, minimize the lead time, minimize the financial cost and the role of management. This paper contains a comprehensive discussion and findings of the development of Lean principles and management through one of the models, namely; Value Stream Mapping (VSM) process which can enhance the operational process in the university environment to improve the process, particularly in the new student registration process.
In this work, a new model for federation data grid system called Sub-Grid-Federation was designed to
improve access latency by accessing data from the nearest possible sites. The strategy in optimising
data access was based on the process of searching into the area identified as ‘Network Core Area’
(NCA). The performance of access latency in Sub-Grid-Federation was tested based on the
mathematical proving and simulated using OptorSim simulator. Four case studies were carried out and
tested in Optimal Downloading Replication Strategy (ODRS) and the Sub-Grid-Federation. The results
show that Sub-Grid-Federation is 20% better in terms of access latency and 21% better in terms of
reducing remotes sites access compared to ODRS. The results indicate that the Sub-Grid-Federation
is a better alternative for the implementation of collaboration and data sharing in data grid system.
Development and urbanization processes around Terengganu River estuary are expected to release a significant amount of heavy metals into the existing surface sediment. However, information on how and why these metals are attached into specific fraction of sediments is still lacking. Therefore, this study aimed to explain the heavy metal concentration distribution in each available fraction in Terengganu River estuary. In this study, nine surface sediments originated from various human activities area in Terengganu River estuary were collected during four different sampling sessions in 2017. Heavy metal content from the collected sediments were extracted using 3-steps BCR sequential extraction method followed by detection using Inductively Coupled Plasma Mass-Spectrometer (ICP-MS) and we discovered that the total concentration of arsenic (As), cobalt (Co), copper (Cu), and zinc (Zn) ranged from 2.18 to 17.48 mg/kg dry wt., 2.53 to 20.53 mg/kg dry wt., 1.01 to 13.13 mg/kg dry wt., and 6.10 to 65.71 mg/kg dry wt., respectively. Dominance of metals in each fraction can be arranged as follows: As: residual > reducible > exchangeable > oxidizable; Co: residual > exchangeable > reducible > oxidizable; Cu: residual > oxidizable > reducible > exchangeable; Zn: residual > exchangeable > reducible > oxidizable. Availability of metals in the sediment at Terengganu River estuary is limited since that majority of metals resides in non-mobilisable fraction of the sediment. In essence, the sequential extraction provides information regarding the metals’ fractionation, availability and mobility, which could be used in assessing the environmental contamination in the area.
International students usually experience a change in body weight and eating behaviour after
migrating to a host country. The aim of this study is to determine the factors associated with body
weight changes among Nigerian postgraduate students at Unversiti Sultan Zainal Abidin (UniSZA),
Malaysia. A prospective study was conducted for six months to determine the association between
body weight changes and socio-demographic, eating behavior, physical activity, dietary intake and
quality of life. A total of 82 students (76 male and six females) completed a set of self-administered
questionnaires, and their weight and height were measured. Descriptive statistic and paired t-test were
carried out to analyze the data (IBM SPSS Version 20.0). Multiple linear regression analysis was
conducted to determine the factors. Body weight significantly increased by 2.3 ± 0.5 kg after 6 months.
Being an art student (β=1.67, p=0.006), being a female (β=-2.68, p=0.009), consuming breakfast once
a week (β=5.10, P=