Visual analysis of the gene delivery process when using invasive bacteria as a vector has been conventionally performed using standard light and fluorescence microscopy. These microscopes can provide basic information on the invasiveness of the bacterial vector including the ability of the vector to successfully adhere to the cell membrane. Standard microscopy techniques however fall short when finer details including membrane attachment as well as internalization into the cytoplasm are desired. High-resolution visual analysis of bacteria-mediated gene delivery can allow accurate measurement of the adherence and internalization capabilities of engineered vectors. Here, we describe the use of scanning electron microscopy (SEM) to directly quantify vectors when they are external to the cell wall, and confocal microscopy to evaluate the vectors when they have internalized into the cytoplasm. By performing the invasion procedure on microscope coverslips, cells can be easily prepared for analysis using electron or confocal microscopes. Imaging the invasion complexes in high resolution can provide important insights into the behavior of bacterial vectors including E. coli, Listeria, and Salmonella when invading their target cells to deliver DNA and other molecules.
Spillovers of Nipah virus (NiV) from its pteropid bat reservoir into the human population continue to cause near-annual outbreaks of fatal encephalitis and respiratory disease in Bangladesh and India since its emergence in Malaysia over 20 years ago. The current lack of effective antiviral therapeutics against NiV merits further testing of compound libraries against NiV using rapid quantitative antiviral assays. The development of recombinant henipaviruses expressing reporter fluorescence and/or luminescence proteins has facilitated the screening of such libraries. In this chapter, we provide a basic protocol for both types of reporter viruses. Utilizing these live NiV-based reporter assays requires modest instrumentation and sidesteps the labor-intensive steps associated with traditional cytopathic effect or viral antigen-based assays.
Protein engineering is a very useful tool for probing structure-function relationships in proteins. Specifically, site-directed mutagenized proteins can provide useful insights into structural, binding and catalytic mechanisms of a protein, particularly when coupled with crystallization. In this chapter, we describe two protocols for performing site-directed mutagenesis of any protein-coding sequence, namely, megaprimer PCR and overlapping extension PCR (OE-PCR). We use as an example how these two SDM methods enhanced the function of a cyclodextrin glucosyltransferase (CGTase) from Bacillus lehensis strain G1.
Non-integrating lentiviral vectors or also known as integrase-defective lentiviral (IDLV) hold a great promise for gene therapy application. They retain high transduction efficiency for efficient gene transfer in various cell types both in vitro and in vivo. IDLV is produced via a combined mutations introduced on the HIV-based lentiviral to disable their integration potency. Therefore, IDLV is considered safer than the wild-type integrase-proficient lentiviral vector as they could avoid the potential insertional mutagenesis associated with the nonspecific integration of transgene into target cell genome afforded by the wild-type vectors.Here we describe the system of IDLV which is produced through mutation in the integrase enzymes at the position of D64 located within the catalytic core domain. The efficiency of the IDLV in expressing the enhanced green fluorescent protein (GFP) reporter gene in transduced human monocyte (U937) cell lines was investigated. Expression of the transgene was driven by the spleen focus-forming virus (SFFV) LTRs. Transduction efficiency was studied using both the IDLV (ID-SFFV-GFP) and their wild-type counterparts (integrase-proficient SFFV-GFP). GFP expression was analyzed by fluorescence microscope and FACS analysis.Based on the results, the number of the GFP-positive cells in ID-SFFV-GFP-transduced U937 cells decreased rapidly over time. The percentage of GFP-positive cells decreased from ~50 % to almost 0, up to 10 days post-transduction. In wild-type SFFV-GFP-transduced cells, GFP expression is remained consistently at about 100 %. These data confirmed that the transgene expression in the ID-SFFV-GFP-transduced cells is transient in dividing cells. The lack of an origin of replication due to mutation of integrase enzymes in the ID-SFFV-GFP virus vector has caused the progressive loss of the GFP expression in dividing cells.Integrase-defective lentivirus will be a suitable choice for safer clinical applications. It preserves the advantages of the wild-type lentiviral vectors but with the benefit of transgene expression without stable integration into host genome, therefore reducing the potential risk of insertional mutagenesis.
Transgenic oil palm (Elaeis guineensis Jacq.) plantlets are regenerated after Agrobacterium tumefaciens-mediated transformation of embryogenic calli derived from young leaves of oil palm. The calli are transformed with an Agrobacterium strain, LBA4404, harboring the plasmid pUBA, which carries a selectable marker gene (bar) for resistance to the herbicide Basta and is driven by a maize ubiquitin promoter. Modifications of the transformation method, treatment of the target tissues using acetosyringone, exposure to a plasmolysis medium, and physical injury via biolistics are applied. The main reasons for such modifications are to activate the bacterial virulence system and, subsequently, to increase the transformation efficiency. Transgenic oil palm cells are selected and regenerated on a medium containing herbicide Basta. Molecular analyses revealed the presence and integration of the introduced bar gene into the genome of the transformants.
Feline infectious peritonitis (FIP) is a lethal systemic disease caused by FIP virus (FIPV). There are no effective vaccines or treatment available, and the virus virulence determinants and pathogenesis are not fully understood. Here, we describe the sequencing of RNA extracted from Crandell Rees Feline Kidney (CRFK) cells infected with FIPV using the Illumina next-generation sequencing approach. Bioinformatics analysis, based on Felis catus 2X annotated shotgun reference genome, using CLC bio Genome Workbench is used to map both control and infected cells. Kal's Z test statistical analysis is used to analyze the differentially expressed genes from the infected CRFK cells. In addition, RT-qPCR analysis is used for further transcriptional profiling of selected genes in infected CRFK cells and Peripheral Blood Mononuclear Cells (PBMCs) from healthy and FIP-diagnosed cats.
Plant cell culture technology is potentially useful in producing high-valued secondary metabolites. Eurycoma longifolia root extracts are consumed as a health tonic but more popularly used as an aphrodisiac. Studies on the aphrodisiac properties and the possible compounds involved have been widely studied. There are many potentially useful compounds reported from the root extracts of E. longifolia. However, studies on the in vitro production of useful compounds from this plant have not been reported. This chapter will describe methods of callus induction and extraction of 9-methoxycanthin-6-one from E. longifolia Jack explants with emphasis on the tap and fibrous roots. This compound, known to have anti-tumour activity, is present in intact plant parts and in callus tissues of different explants.
Proteins often interact with each other to form complexes and play functional roles in almost all cellular processes. The study of protein-protein interactions is therefore critical to understand protein function and biological pathways. Affinity Purification coupled with Mass Spectrometry (AP-MS) is an invaluable technique for identifying the interaction partners in protein complexes. In this approach, the protein of interest is fused to an affinity tag, followed by the expression and purification of the fusion protein. The affinity-purified sample is then analyzed by mass spectrometry to identify the interaction partners of the bait proteins. In this chapter, we detail the protocol for tandem affinity purification (TAP) based on the use of the FLAG (a fusion tag with peptide sequence DYKDDDDK) and hemagglutinin (HA) peptide epitopes. The immunoprecipitation using dual-affinity tags offers the advantage of increasing the specificity of the purification with lower nonspecific-background interactions.
Phage display is a technique that allows the presentation of unique proteins on the surface of bacteriophages. The phage particles are usually screened via repetitive rounds of antigen-guided selection and phage amplification. The main advantage of this approach lies in the physical linkage between phenotype and genotype. This feature allows the isolation of single unique clones from a panning campaign consisting of a highly diverse population of clones. Due to the high-throughput nature of this technique, different approaches have been developed to assist phage display selections. One of which involves utilizing a streptavidin-coated solid-phase extraction (SPE) tip that is mounted to an electronically controlled motorized multichannel pipette. In this chapter, we will entail the procedures involved in the adaptation of a commercial SPE tip (MSIA™ streptavidin D.A.R.T's®) as the solid phase. This protocol is an updated version of a previous protocol with some minor refinements.
Capillary electrophoresis coupled with a capacitively coupled contactless conductivity detector (CE-C(4)D) has been employed for the determination of the β-blocker drugs (atenolol and amiloride) in pharmaceutical formulations. 150 mM acetic acid was used as background electrolyte. The influence of several factors (detector excitation voltage and frequency, buffer concentration, applied voltage, capillary temperature, and injection time) was studied. Non-UV absorbing L-valine was used as an internal standard; the analytes were all separated in less than 7 min. The separation was carried out in normal polarity mode at 28 °C, 25 kV, and using hydrodynamic injection (25 s). The separation was effected in a bare fused-silica capillary 75 μm × 52 cm. The CE-C(4)D method was validated with respect to linearity, limit of detection and quantification, accuracy, precision, and selectivity. Calibration curves were linear over the range 5-250 μg mL(-1) for the studied analytes. The relative standard deviations of intra- and inter-day precisions of migration times and corrected peak areas were less than 6.0%. The method showed good precision and accuracy and was successfully applied to the simultaneous determination of the β-blocker drugs in different pharmaceutical tablets.
Shotgun proteomics has been widely applied to study proteins in complex biological samples. Combination of high-performance liquid chromatography with mass spectrometry has allowed for comprehensive protein analysis with high resolution, sensitivity, and mass accuracy. Prior to mass spectrometry analysis, proteins are extracted from biological samples and subjected to in-solution trypsin digestion. The digested proteins are subjected for clean-up and injected into the liquid chromatography-mass spectrometry system for peptide mass identification. Protein identification is performed by analyzing the mass spectrometry data on a protein search engine software such as PEAKS studio loaded with protein database for the species of interest. Results such as protein score, protein coverage, number of peptides, and unique peptides identified will be obtained and can be used to determine proteins identified with high confidence. This method can be applied to understand the proteomic changes or profile brought by bio-carrier-based therapeutics in vitro. In this chapter, we describe methods in which proteins can be extracted for proteomic analysis using a shotgun approach. The chapter outlines important in vitro techniques and data analysis that can be applied to investigate the proteome dynamics.
Generation of high-producing clones is a perquisite for achieving recombinant protein yields suitable for biopharmaceutical production. However, in many industrially important cell lines used to produce recombinant proteins such as Chinese hamster ovary, mouse myeloma line (NS0), and hybridomas, only a minority of clones show significantly above-average productivity. Thus, in order to have a reasonable probability of finding rare high-producing clones, a large number of clones need to be screened. Limiting dilution cloning is the most commonly used method, owing to its relative simplicity and low cost. However the use of liquid media in this method makes the selection of monoclonal hybridoma and transfectoma colonies to be labor intensive and time consuming, thus significantly limiting the number of clones that can be feasibly screened. Hence, we describe the use of semisolid media to immobilize clones and a high-throughput, automated colony picker (ClonePix FL) to efficiently isolate monoclonal high-producing clones secreting monoclonal antibodies.
Recombineering is a powerful genetic engineering technique based on homologous recombination that can be used to accurately modify DNA independent of its sequence or size. One novel application of recombineering is the assembly of linear BACs in E. coli that can replicate autonomously as linear plasmids. A circular BAC is inserted with a short telomeric sequence from phage N15, which is subsequently cut and rejoined by the phage protelomerase enzyme to generate a linear BAC with terminal hairpin telomeres. Telomere-capped linear BACs are protected against exonuclease attack both in vitro and in vivo in E. coli cells and can replicate stably. Here we describe step-by-step protocols to linearize any BAC clone by recombineering, including inserting and screening for presence of the N15 telomeric sequence, linearizing BACs in vivo in E. coli, extracting linear BACs, and verifying the presence of hairpin telomere structures. Linear BACs may be useful for functional expression of genomic loci in cells, maintenance of linear viral genomes in their natural conformation, and for constructing innovative artificial chromosome structures for applications in mammalian and plant cells.
Constitutive secretion is predominantly measured by collecting the media from cells and performing plate-based assays. This approach is particularly sensitive to changes in cell number, and a significant amount of effort has to be spent to overcome this. We have developed a panel of quantitative flow cytometry-based assays and reporter cell lines that can be used to measure constitutive secretion. These assays are insensitive to changes in cell number making them very robust and well suited to functional genomic and chemical screens. Here, we outline the key steps involved in generating and using these assays for studying constitutive secretion.
Protein microarray is a miniaturized multi-analyte, solid-phased immunoassay where thousands of immobilized individual protein spots on a microscopic slide bind are bound to specific antibodies (immunoglobulins) from serum samples, which are then detected by fluorescent labeling. The image processing and pattern recognition are then quantitatively analyzed using advanced algorithms. Here, we describe the use of an in-house-produced complex protein microarray containing extracts and pure proteins that has been probed with antibodies present in the horse sera and detection by fluorophore-conjugated antibody and data analysis. The flexibility of the number and types of proteins that can be printed on the microarray allows different set of specific IgE immunoassay analysis to be carried out.
Bacteriophages have been explored for their uses in vaccine development, due to the ease of propagation while displaying epitopes in high density. Bacteriophage T7 has been demonstrated to be useful in the production of potential vaccine candidates for various diseases, including influenza A, foot-and mouth disease (FMD), and cancers. In this chapter, we described the use of phage T7 to display potential foot-and-mouth disease virus (FMDV) epitope, from cloning to expression, purification, and immunization in a mouse model.
Hendra and Nipah viruses are henipaviruses that have caused lethal human disease in Australia and Malaysia, Bangladesh, India, and the Philippines, respectively. These viruses are considered Category C pathogens by the US Centers for Disease Control. Nipah virus was recently placed on the World Health Organization Research and Development Blueprint Roadmaps for vaccine and therapeutic development. Given the infrequent and unpredictable nature of henipavirus outbreaks licensure of vaccines and therapeutics will likely require an animal model to demonstrate protective efficacy against henipavirus disease. Studies have shown that nonhuman primates are the most accurate model of human henipavirus disease and would be an important component of any application for licensure of a vaccine or antiviral drug under the US FDA Animal Rule. Nonhuman primate model selection and dosing are discussed regarding vaccine and therapeutic studies against henipaviruses.
Molecular surveillance of Chikungunya virus (CHIKV) is important as it provides data on the circulating CHIKV genotypes in endemic countries and enabling activation of measures to be taken in the event of a pending outbreak. Molecular surveillance is carried out by first detecting CHIKV in susceptible humans or among field-caught mosquitoes. This is followed by sequencing a selected region of the virus which will provide evidence on the source of the virus and possible association of the virus to increased cases of Chikungunya infections.
In gene expression studies, missing values are a common problem with important consequences for the interpretation of the final data (Satija et al., Nat Biotechnol 33(5):495, 2015). Numerous bioinformatics examination tools are used for cancer prediction, including the data set matrix (Bailey et al., Cell 173(2):371-385, 2018); thus, it is necessary to resolve the problem of missing-values imputation. This chapter presents a review of the research on missing-values imputation approaches for gene expression data. By using local and global correlation of the data, we were able to focus mostly on the differences between the algorithms. We classified the algorithms as global, hybrid, local, or knowledge-based techniques. Additionally, this chapter presents suitable assessments of the different approaches. The purpose of this review is to focus on developments in the current techniques for scientists rather than applying different or newly developed algorithms with identical functional goals. The aim was to adapt the algorithms to the characteristics of the data.
Enteroviruses 71 (EV71) is a single-stranded, neurotrophic RNA virus responsible for the numerous outbreaks of hand, foot, and mouth disease (HFMD) in the Asia-Pacific regions. HFMD primarily affects children to cause range of infection, from mild symptoms to acute flaccid paralysis, and hemorrhage. Despite increased incidence of EV71 epidemics globally and research against EV71 becoming prioritized, no antiviral agent against EV71 has yet been licensed and approved worldwide. In this chapter, detailed EV71 antiviral screening techniques are described, including plaque assay which determines viral titers through the use of a semisolid overlay, carboxymethyl cellulose to allow even viral spread and infection across the host cellular monolayers as well as a crystal violet, a distinct counterstain to visualize circular regions of infectious zones-plaques. qRT-PCR is used to quantify the viral genomic RNA in the infected samples and MTS cell viability assay to quantify the cell viability after infection or toxicity of the compound on the cells. Furthermore, various antiviral inhibition assays including prophylactic, post infection, and virucidal assays are demonstrated for estimation of the antiviral activity of potential antiviral drugs against EV71. These methods can be effectively utilized in virology laboratories for effective high-throughput screening of antiviral molecules against EV71 that can assist in the future development of antiviral drugs.