Management of waste is one of the major challenges faced by many developing countries. This study therefore attempts to develop a circular economy (CE) model to manage wastes and closing the loop and reducing the generation of residual wastes in Indian municipalities. Through extant literature review, the researchers found 30 success factors of CE implementation. Using the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) SIMOS approach, the rating and weight of decision makers (DMs) for each factor were collected. A structured questionnaire has been developed incorporating all these 30 factors, to extract the most important factors. The data was collected from top 10 officials (DMs) from the Chennai municipality, who handle three regions (metropolitan, suburbia and industrial). Based on the TOPSIS SIMOS analysis, nine CE implementing factors (critical success factors (CSFs)) among the 30 variables that were significant based on the cut-off value was identified. A CE model has been proposed based on these nine CSFs for waste management in India.
Rapid population growth of major urban centres in many developing countries has created massive landfills with extraordinary heights and steep side-slopes, which are frequently surrounded by illegal low-income residential settlements developed too close to landfills. These extraordinary landfills are facing high risks of catastrophic failure with potentially large numbers of fatalities. This study presents a novel method for risk assessment of landfill slope failure, using probabilistic analysis of potential failure scenarios and associated fatalities. The conceptual framework of the method includes selecting appropriate statistical distributions for the municipal solid waste (MSW) material shear strength and rheological properties for potential failure scenario analysis. The MSW material properties for a given scenario is then used to analyse the probability of slope failure and the resulting run-out length to calculate the potential risk of fatalities. In comparison with existing methods, which are solely based on the probability of slope failure, this method provides a more accurate estimate of the risk of fatalities associated with a given landfill slope failure. The application of the new risk assessment method is demonstrated with a case study for a landfill located within a heavily populated area of New Delhi, India.
A one-step self-sustained carbonization of coconut shell biomass, carried out in a brick reactor at a relatively low temperature of 300-500°C, successfully produced a biochar-derived adsorbent with 308 m2/g surface area, 2 nm pore diameter, and 0.15 cm3/g total pore volume. The coconut shell biochar qualifies as a nano-adsorbent, supported by scanning electron microscope images, which showed well-developed nano-pores on the surface of the biochar structure, even though there was no separate activation process. This is the first report whereby coconut shell can be converted to biochar-derived nano-adsorbent at a low carbonization temperature, without the need of the activation process. This is superior to previous reports on biochar produced from oil palm empty fruit bunch.
Plastic waste circularity is a priority at a global level. Sustainable development goals (SDGs) set the ways to go, and the circular economy principles underlined the 'green' strategies to be employed. However, in practice, there is still much to do, especially in developing countries, where open burning and open dumping still represent the common way of plastic waste disposal. This review aims to analyse current plastic waste circular approaches in low-middle income settings. Seven countries were selected based on the economic level and data availability from the authors, and analysed to collect and critically discuss the actions implemented at a city level. Examples of waste minimization and recycling strategies, selective collection systems and public campaigns are reported from Africa, Asia and Latin America. First, a background analysis related to physical and governance aspects of municipal solid waste management systems of the chosen settings was conducted. The assessment was focused on the treatment processes or minimization actions. Then, the applicability of the projects to achieve the SDGs was commented on. The outcomes of the research underline the need to: (1) scale up small-scale and pilot projects, (2) disseminate good practices in more low- to middle-income settings, (3) create synergies among international partners for further replications in cities. Urgent solutions to plastic waste pollution are needed. The review presented practical actions to be implemented now to boost plastic waste circularity in developing cities.
This paper examines the factors that might influence recycling behaviour of the households in Dhaka city, Bangladesh. Information on recycling activity, socio-economic characteristics, and attitudes of the households towards recycling were obtained from interviews with 456 households in Dhaka. Logistic regression analysis was used to determine the dominant factors that might influence the recycling behaviour of the households. The results showed that environmental consciousness, the availability of storage space, and age (25-35 years) are significant positive predictors of recycling behaviour (at the 1% level). Another variable Income 2 (TK3,000-15,000) is also positively correlated with recycling (at the 5% level). Establishment of a recycling programme could be an effective strategy in implementing sustainable waste management in Bangladesh. For this strategy to succeed, however, active partnership between households and the waste management service department is required. The households' attitudes toward recycling should, therefore, be taken into consideration as should the results of this study, which are important indicators of households' positive attitudes toward sustainable waste management in Dhaka.
Food waste is a global challenge that threatens the sustainable development of human societies. Although food waste is produced in all stages of the food supply chain, household food waste is the biggest contributor to the food waste fraction. In this research, we systematically reviewed 54 empirical studies to explore drivers and barriers to household food waste reduction and prevention. Key aspects, such as comprehension and perception of food waste issues, practices and lifestyles, were examined. Our findings suggest that a great understanding of the impact of one's food waste on health, environment and economy directly promotes food waste management. Additionally, the food waste issue is not attributed to a single factor, it may differ varies across countries. The majority of the reviewed literature on household food waste comes from European countries, where similar geographical, economic and cultural characteristics may lead to comparable drivers and barriers. This could be the reason for showing optimistic experience to the respective food waste management interventions. However, the applicability of these findings and interventions to regions beyond Europe are uncertain. Future studies should also be expanded to include regions such as Asia, North America, Africa, Oceania, Latin America and the Caribbean. To support the sustainable management of household food waste, mapping country-specific food waste determinants is crucial in developing easy-to-implement food waste interventions that can specifically address the food waste issue in each country.
This research aims to analyse and understand recycling phenomena and competition between large-scale and small-scale enterprises under different public attention. It mainly emphasizes service-providing behaviours to the consumers in the recycling industry, where recyclers are struggling to enhance their profits. The government strives to protect the environment by promoting an efficient recycling industry. As fast-growing waste products, the recyclers should achieve the advantage of number and be equipped with service capability for the consumers. Thus, this study employs an evolutionary game model to analyse the competition for waste products acquisitions between large and small recyclers. Due to a significant association between the service and acquisition waste product price for the consumers and recycling quantity, there is a strong mutual influence between the acquisition price of waste products and the price strategy-taken rate of large and small recyclers. Results also reveal that the market acquisition price and processing cost play a crucial role in recyclers' decision-making on setting prices for acquiring waste products from consumers. Furthermore, it is also found that waste products acquisition price and recyclers' processing cost are the key factors that affect large and small recyclers' recycling quantity.
Solid waste collection and disposal are among the most vital services provided to about 700 770 residents of the city of Erbil in northern Iraq. As such, proper waste management systems that consider both the quantity and composition of domestic solid waste are strongly required to address the increasing amount of solid waste. Unfortunately, these essential data are not easily available. The present study sought to gather data on the quantity and composition of domestic solid waste collected from different quarters in Erbil, and the feasibility of recycling these wastes. The solid waste generation rate (GR), uncompacted density, and weight percentages of combustible and incombustible materials were determined based on the collected materials (i.e., food, plastic, paper, metal, glass and cloth). The results show that the average GR and uncompacted density were 0.654 kg capita(-1) day(-1) and 175.72 kg m(-3), respectively. The weight percentages of food, plastic, paper, metal, glass, and cloth as components of domestic solid waste were 79.34, 6.28, 5.9, 3.6, 3.42 and 1.45%, respectively.
Plastic waste constitutes the third largest waste volume in Malaysian municipal solid waste (MSW), next to putrescible waste and paper. The plastic component in MSW from Kuala Lumpur averages 24% (by weight), whereas the national mean is about 15%. The 144 waste dumps in the country receive about 95% of the MSW, including plastic waste. The useful life of the landfills is fast diminishing as the plastic waste stays un-degraded for more than 50 years. In this study the compostability of polyethylene and pro-oxidant additive-based environmentally degradable plastics (EDP) was investigated. Linear low-density polyethylene (LLDPE) samples exposed hydrolytically or oxidatively at 60 degrees C showed that the abiotic degradation path was oxidative rather than hydrolytic. There was a weight loss of 8% and the plastic has been oxidized as shown by the additional carbonyl group exhibited in the Fourier transform infra red (FTIR) Spectrum. Oxidation rate seemed to be influenced by the amount of pro-oxidant additive, the chemical structure and morphology of the plastic samples, and the surface area. Composting studies during a 45-day experiment showed that the percentage elongation (reduction) was 20% for McD samples [high-density polyethylene, (HDPE) with 3% additive] and LL samples (LLDPE with 7% additive) and 18% reduction for totally degradable plastic (TDP) samples (HDPE with 3% additive). Lastly, microbial experiments using Pseudomonas aeroginosa on carbon-free media with degradable plastic samples as the sole carbon source, showed confirmatory results. A positive bacterial growth and a weight loss of 2.2% for degraded polyethylene samples were evident to show that the degradable plastic is biodegradable.
Lignocellulosic biomass has been widely recognised as a potential low-cost source for the production of high added value materials and proved to be a good precursor for the production of activated carbons. One of such valuable biomasses used for the production of activated carbons is palm shell. Palm shell (endocarp) is an abundant by-product produced from the palm oil industries throughout tropical countries. Palm shell activated carbon and palm shell carbon molecular sieve has been widely applied in various environmental pollution control technologies, mainly owing to its high adsorption performance, well-developed porosity and low cost, leading to potential applications in gas-phase separation using adsorption processes. This mini-review represents a comprehensive overview of the palm shell activated carbon and palm shell carbon molecular sieve preparation method, physicochemical properties and feasibility of palm shell activated carbon and palm shell carbon molecular sieve in gas separation processes. Some of the limitations are outlined and suggestions for future improvements are pointed out.
Carbide sludge (10.4-11.5 tonnes day(-1)) is generated from the reaction of calcium carbide (900 kg) and water (6,000 L) in the production of acetylene (2,400 m3), in three selected acetylene manufacturing plants. The sludge (of pH 12.2 and containing Cu, Pb, Fe, Mn, Ni and Zn ions whose concentrations exceed the Department of Environment limits for industrial wastewater) was treated by vacuum filtration as a substitute for the ponding system, which is environmentally less acceptable. A similar system by flocculation was also developed. The filtration system represents an improvement over the ponding method, as shown by a pH of 7 for the clear filtrate; the solid cake, which contains 98% of the metals, can be conveniently disposed at an integrated scheduled waste treatment centre.
Malaysia disposes of 28,500 tonnes of municipal solid waste directly into landfills daily. This fact alone necessitates sustainable landfills to avoid adverse impacts on the population and the environment. The aim of the present study was to elucidate the issues and challenges faced by waste managers in moving towards sustainable landfilling in Malaysia. Various factors influence the management of a landfill. Among them is the human factor, which includes attitude and public participation. Although Malaysia's economy is developing rapidly, public concern and awareness are not evolving in parallel and therefore participation towards sustainable waste management through the 'reduce, reuse and recycle' approach (3Rs) is severely lacking. Consequently, landfill space is exhausted earlier than scheduled and this is no longer sustainable in terms of security of disposal. Challenges also arise from the lack of funding and the increase in the price of land. Thus, most waste managers normally aim for 'just enough' to comply with the regulations. Investment for the establishment of landfills generally is minimized since landfilling operations are considered uneconomical after closure. Institutional factors also hamper the practice of sustainable landfilling in the country where 3Rs is not mandatory and waste separation is totally absent. Although there are huge obstacles to be dealt with in moving towards sustainable landfilling in Malaysia, recent developments in waste management policy and regulations have indicated that positive changes are possible in the near future. Consequently, with the issues solved and challenges tackled, landfills in Malaysia can then be managed effectively in a more sustainable manner.
Landfilling is a major option in waste management hierarchy in developing nations. It generates leachate, which has the potential of polluting watercourses. This study analysed the physico-chemical components of leachate from a closed sanitary landfill in Malaysia, in relation to evaluating the toxicological impact on fish species namely Pangasius sutchi S., 1878 and Clarias batrachus L., 1758. The leachate samples were taken from Air Hitam Sanitary Landfill (AHSL) and the static method of acute toxicity testing was experimented on both fish species at different leachate concentrations. Each fish had an average of 1.3 ± 0.2 g wet weight and length of 5.0 ± 0.1 cm. Histology of the fishes was examined by analysing the gills of the response (dead) group, using the Harris haemtoxylin and eosin (H&E) method. Finneys' Probit method was utilized as a statistical tool to evaluate the data from the fish test. The physico-chemical analysis of the leachate recorded pH 8.2 ± 0.3, biochemical oxygen demand 3500 ± 125 mg L(-1), COD 10 234 ± 175 mg L(-1), ammonical nitrogen of 880 ± 74 mg L(-1), benzene 0.22 ± 0.1 mg L(-1) and toluene 1.2 ± 0.4 mg L(-1). The 50% lethality concentration (LC(50)) values calculated after 96 h exposure were 3.2% (v/v) and 5.9% (v/v) of raw leachate on P. sutchi and C. batrachus, respectively. The H&E staining showed denaturation of the nucleus and cytoplasm of the gills of the response groups. Leachate from the sanitary landfill was toxic to both fish species. The P. sutchi and C. batrachus may be used as indicator organisms for leachate pollution in water.
A choice experiment analysis was conducted to estimate the preference for specific waste disposal technologies in Malaysia. The study found that there were no significant differences between the choice of a sanitary landfill or an incinerator. What matters is whether any disposal technology would lead to obvious social benefits. A waste disposal plan which is well linked or integrated with the community will ensure its acceptance. Local authorities will be challenged to identify solid waste disposal sites that are technically appropriate and also socially desirable.
Malaysia recorded 8904 coronavirus disease (COVID-19) cases and 124 deaths as of 27 July 2020. Globally, everyday there are thousands of new cases of COVID-19 being recorded. Due to the high number of infections globally and nationwide the increase in the amount of clinical waste (CW) generation was expected. Malaysia has reported a 27% (by weight) increase in the generation of CW which was mostly attributed to COVID-19 related waste. This article presents the impacts of COVID-19 in waste generation, policy and regulation of CW management (CWM) in Malaysia and a case study on the CWM at a selected hospital used as a COVID-19 focal point. The current practice of CWM due to COVID-19 related cases follows the existing policy and legislation of CWM detailed in the Schedule Waste Regulation (2005), Environmental Quality Act, 1974, and with the standard operating procedure provided by the Ministry of Health, Malaysia. The case study conducted through survey and questionnaire interviews revealed that the CWM in government hospitals followed existing guidelines for CWM for COVID-19 waste, with some additional precautions and rules by the waste management contractors.
The coconut industry generates a relatively large amount of coconut shell and husk biomass, which can be utilized for industrial and environmental purposes. Immense potential for added value when coconut shell and husk biomass are turned into biochar and limited studies are available, making this review paper significant. This paper specifically presents the production and activation technology, economic and financial aspect and application of biochar from coconut shell and husk biomass. Pyrolysis, gasification and self-sustained carbonization are among the production technology discussed to convert this biomass into carbon-rich materials with distinctive characteristics. The surface characteristics of coconut-based biochar, that is, Brunauer-Emmett-Teller (BET) surface area (SBET), pore volume (Vp), pore diameter (dp) and surface functional group can be enhanced by physical and chemical activation and metal impregnation. Due to their favourable characteristics, coconut shell and husk-activated biochar exhibit their potential as valuable adsorption materials for industrial and environmental application including biodiesel production, capacitive deionization, soil amendment, water treatment and carbon sequestration. With the knowledge of the potential, the coconut industry can contribute to both the local and global biocircular economy by producing coconut shell and husk biochar for economic development and environmental remediation. The capital and operating cost for production and activation processes must be taken into account to ensure bioeconomy sustainability, hence coconut shell and husk biomass have a great potential for income generation.
The availability of paddy husk from rice processing plants remains high owing to increase in the worldwide rice consumption. Increasing demand for chicken products leads to poultry wastes production. Co-composting of the aforementioned wastes could solve the indiscriminate disposal of these wastes. Thus, co-composting of paddy husk and chicken slurry with clinoptilolite zeolite and urea as additive was carried out. Clinoptilolite zeolite was used to enhance ammonium and nitrate retention in the compost. Temperature of the compost was monitored three times daily for 55 days. Cation exchange capacity, organic matter, ash, humic acids, pH, total C, N, C/N ratio; total P, exchangeable Ca, Mg, K, NH4+, NO3-, and heavy metals contents were determined using standard procedures. pH, total N, humic acids, ash, NH4+, NO3-, P, Ca, Mg, and K contents increased but the salinity, heavy metals contents, and microbial population were low after the co-composting process. Zea mays L. (test crop) seed germination rate in distilled water and the compost were not significantly different. Growth of Spinach oleracea (test crop) on a peat-based growing medium and the compost was also not significantly different. These findings were possible because the clinoptilolite zeolite used in co-composting reduced accumulation of heavy metals that may have damage effects on the test crops. Mature compost with good agronomic properties can be produced by co-composting chicken slurry and paddy husk using clinoptilolite zeolite and urea as additives.
Construction and demolition waste continues to sharply increase in step with the economic growth of less developed countries. Though the construction industry is large, it is composed of small firms with individual waste management practices, often leading to the deleterious environmental outcomes. Quantifying construction and demolition waste generation allows policy makers and stakeholders to understand the true internal and external costs of construction, providing a necessary foundation for waste management planning that may overcome deleterious environmental outcomes and may be both economically and environmentally optimal. This study offers a theoretical method for estimating the construction and demolition project waste generation rate by utilising available data, including waste disposal truck size and number, and waste volume and composition. This method is proposed as a less burdensome and more broadly applicable alternative, in contrast to waste estimation by on-site hand sorting and weighing. The developed method is applied to 11 projects across Malaysia as the case study. This study quantifies waste generation rate and illustrates the construction method in influencing the waste generation rate, estimating that the conventional construction method has a waste generation rate of 9.88 t 100 m(-2), the mixed-construction method has a waste generation rate of 3.29 t 100 m(-2), and demolition projects have a waste generation rate of 104.28 t 100 m(-2).
The management of end-of-life vehicles (ELVs) conserves natural resources, provides economic benefits, and reduces water, air, and soil pollution. In an effort to adequately manage flow of ELVs, modern infrastructure is considered a prerequisite. Thus, development of an effective performance evaluation tool for monitoring and continuous improvement of ELV management systems is strongly desired. In this paper, a performance evaluation tool is proposed for ELV management system implementation, based on the analytic hierarchy process. A real-life case study in Malaysia was conducted in order to demonstrate the potential and applicability of the presented methodology. The scores of eight key success factors in establishing an ELV management system (i.e., management responsibility, performance management, capacity management, resource management, stakeholders' responsibility, education and awareness, improvement and enforcement, and cost management) are presented. The overall score of the ELV management system implementation in Malaysia is equal to 2.13. Therefore, its performance level is average. The presented multi-criteria decision analysis tool can be of assistance not only to stakeholders in the Malaysian ELV management system, but also to vehicle recycling managers from other countries in order to monitor and continuously improve their ELV management systems.