Displaying publications 1 - 20 of 62 in total

Abstract:
Sort:
  1. Sreenath S, Sudhakar K, Yusop AF
    J Environ Manage, 2021 Dec 01;299:113639.
    PMID: 34479146 DOI: 10.1016/j.jenvman.2021.113639
    Sustainability has become a focus area for practitioners and scholars due to the growing socio-economic issues. The sustainability of airport operations is being raised in various international platforms. This paper aims to identify the dimensions of sustainability and evaluate sustainable practices in airports of selected ASEAN countries. The various dimensions associated with the environmental aspect are energy management, emissions management, water and effluents management, solid waste management. It was understood that noise management, employee development, and community investment belong to the social dimension. Similarly, the factors such as economic contribution, passenger experience, airport safety, and security are inclined to economic dimensions of sustainability. It was found that environmentally sustainable practices have greater importance than social and economic initiatives in the airport context which provide quantifiable benefits for airports in the long term. Airport operators in South East Asia strived to mitigate carbon emissions, reduce waste and effluents, enhance the economic contribution, satisfy passengers, and meet employee needs. Compared to the total economic and social benefits obtained from these airports, the negative impacts of airport operation (such as noise emission from aircraft) are minimal but significant. The most common sustainable initiatives in airports, such as employee development, energy management, and passenger safety, supported sustainable development goals (SDG) 8, SDG 9, and SDG 11. A weak connection is observed between SDG 14 & SDG 15 and the airport's sustainable practices. The new technological innovations are concentrated in busy and profitable airports. A slow trend towards the adoption of new technologies for sustainable practices is observed in airports. The paper concludes that major airport operators in South-East Asia have effectively responded to the growing sustainability challenges in aviation markets. The sustainable dimensions and practices discussed will be valuable resource for airports striving to achieve sustainability goals.
    Matched MeSH terms: Aircraft
  2. Venugopal A, Mohammad R, Koslan MFS, Sayd Bakar SR, Ali A
    Materials (Basel), 2021 May 06;14(9).
    PMID: 34066461 DOI: 10.3390/ma14092414
    The environmental condition in which the Royal Malaysian Airforce is currently operating its aircraft is prone to corrosion. This is due to the high relative humidity and temperature. With most of its aircraft being in the legacy aircraft era, the aircraft's main construction consists of the aluminium 2024 material. However, this material is prone to corrosion, thus reducing fatigue life and leading to fatigue failure. Using the concept of either Safe Life or Damage Tolerance as its fatigue design philosophy, the RMAF adopts the Aircraft Structure Integrity Program (ASIP) to monitor its structural integrity. With the current problem of not having the structural limitation on corrosion-damaged structure, the RMAF has embarked on its fatigue testing method. Finite Element (FE) studies and flight tests were conducted, and the outcome is summarized. The conclusion is that the longeron tested on the aircraft can withstand the operational load, and its yield strength is below the ultimate yield strength of the material. These research outcomes will also enhance the ASIP for other aircraft platforms in the RMAF fleet for its structure life assessment or service life extension program.
    Matched MeSH terms: Aircraft
  3. Bhuvan KC, Shrestha R, Leggat PA, Ravi Shankar P, Shrestha S
    Travel Med Infect Dis, 2021;43:102103.
    PMID: 34111566 DOI: 10.1016/j.tmaid.2021.102103
    Matched MeSH terms: Aircraft
  4. Shaikh Abdul Karim S, Md Tahir FA, Mohamad UK, Abu Bakar M, Mohamad KN, Suleiman M, et al.
    Int J Emerg Med, 2020 Oct 28;13(1):50.
    PMID: 33115412 DOI: 10.1186/s12245-020-00308-7
    BACKGROUND: During the COVID-19 pandemic, many countries instituted closure of borders from international and local travels. Stranded citizens appeal to their governments to embark on citizen repatriation missions. Between February and April 2020, the Government of Malaysia directed repatriation of its citizens from China, Iran, Italy and Indonesia. We describe the preparation and execution of the repatriation mission using chartered commercial aircraft. The mission objectives were to repatriate as many citizens based on aircraft capacity and prevent onboard transmission of the disease to flight personnel.

    RESULTS: Five repatriation missions performed was led by the National Agency for Disaster Management (NADMA) with the Ministry of Health providing technical expertise. A total of 432 citizens were repatriated from the missions. The operations were divided into four phases: the pre-boarding screening phase, the boarding and in-flight phase, the reception phase and the quarantine phase. The commercial aircraft used were from two different commercial airlines. Each mission had flight crew members between 10 and 17 people. There were 82 positive cases detected among the repatriated citizens. There was a single positive case of a healthcare worker involved in the mission, based on the sample taken on arrival of the flight. There were no infections involving flight team members.

    CONCLUSION: Medical flight crew must be familiar with aircraft fittings that differ from one commercial airline to another as it influences infection control practices. A clear understanding of socio-political situation of a country, transmission routes of a pathogen, disease presentation, and knowledge of aviation procedures, aircraft engineering and design is of great importance in preparing for such missions. Our approach of multidiscipline team involvement managed to allow us to provide and execute the operations successfully.

    Matched MeSH terms: Aircraft
  5. Ahmad Sobri S, Whitehead D, Mohamed M, Mohamed JJ, Mohamad Amini MH, Hermawan A, et al.
    Polymers (Basel), 2020 Oct 23;12(11).
    PMID: 33114223 DOI: 10.3390/polym12112461
    Carbon fibre-reinforced polymer (CFRP) composite materials play an increasingly important role in modern manufacturing, and they are among the more prominent materials used in aircraft manufacturing today. However, CFRP is highly prone to delamination and other damage when drilled due to it being extremely strong with a good strength-to-weight ratio and high thermal conductivity. Because of this problem and CFRP's growing importance in aircraft manufacture, research has focused on the entry and exit holes as indicators of damage occurrence during drilling of screws, rivets, and other types of holes. The inside of the hole was neglected in past research and a proper way to quantify the internal side of a hole by combining the entry and exit hole should be included. To fill this gap and improve the use of CFRP, this paper reports a novel technique to measure the holes by using the extension of the adjusted delamination factor (SFDSR) for drilling thick CFRP composites in order to establish the influence of machining input variables on key output measures, i.e., delamination and other damages. The experimental results showed a significant difference in interpretation of the damage during the analysis. Improvement was made by providing better perspectives of identifying hole defects.
    Matched MeSH terms: Aircraft
  6. Sirunyan AM, Tumasyan A, Adam W, Ambrogi F, Bergauer T, Dragicevic M, et al.
    Phys Rev Lett, 2020 Oct 09;125(15):151802.
    PMID: 33095594 DOI: 10.1103/PhysRevLett.125.151802
    The first observation is reported of the combined production of three massive gauge bosons (VVV with V=W, Z) in proton-proton collisions at a center-of-mass energy of 13 TeV. The analysis is based on a data sample recorded by the CMS experiment at the CERN LHC corresponding to an integrated luminosity of 137  fb^{-1}. The searches for individual WWW, WWZ, WZZ, and ZZZ production are performed in final states with three, four, five, and six leptons (electrons or muons), or with two same-sign leptons plus one or two jets. The observed (expected) significance of the combined VVV production signal is 5.7 (5.9) standard deviations and the corresponding measured cross section relative to the standard model prediction is 1.02_{-0.23}^{+0.26}. The significances of the individual WWW and WWZ production are 3.3 and 3.4 standard deviations, respectively. Measured production cross sections for the individual triboson processes are also reported.
    Matched MeSH terms: Aircraft
  7. Zailani MAH, Sabudin RZAR, Rahman RA, Saiboon IM, Ismail A, Mahdy ZA
    Medicine (Baltimore), 2020 Sep 04;99(36):e21967.
    PMID: 32899033 DOI: 10.1097/MD.0000000000021967
    INTRODUCTION: Medical products transportation has become an important research topic requiring multidisciplinary collaboration among experts in medicine, engineering, and health economics. Current modes of transportation are unable to overcome the limited settings in maternal healthcare, particularly during the event of obstetric emergencies. The drone is a promising medical product aerial transportation (MedART) that holds an enormous potential for delivery of medical supplies in the healthcare system. We conducted a systematic review to examine scientific evidence of positive impact of drone transportation on maternal health.

    METHODS: The following electronic databases were searched from inception to July 2019: ScienceDirect, PubMed, and EMBASE. The report was made in accordance with the principles of PRISMA guidelines. The search terms used were related to drones including unmanned aerial vehicle (UAV) and unmanned aerial system (UAS), and related to obstetric/maternal including obstetric emergencies and postpartum hemorrhage. Studies were selected if the intervention used were drones, and if any direct or indirect maternal health indicators were reported. Meta-analysis was not done throughout the study in view of the anticipated heterogeneity of each study.

    RESULTS: Our initial search yielded a total of 244 relevant publications, from which 236 were carried forward for a title and abstract screening. After careful examination, only two were included for systematic synthesis. Among the reasons for exclusion were irrelevance to maternal health purpose, and irrelevance to drone applications in healthcare. An updated search yielded one additional study that was also included. Overall, two studies assessed drones for blood products delivery, and one study used drones to transport blood samples.

    CONCLUSION: A significant deficiency was found in the number of reported studies analyzing mode of medical products transportation and adaptation of drones in maternal healthcare. Future drone research framework should focus on maternal healthcare-specific drone applications in order to reap benefits in this area.

    Matched MeSH terms: Aircraft/instrumentation*
  8. Lim E, Lan BL, Ooi EH, Low HL
    Sci Rep, 2020 08 12;10(1):13626.
    PMID: 32788610 DOI: 10.1038/s41598-020-70614-w
    This study investigates the effects of aircraft cabin pressure on intracranial pressure (ICP) elevation of a pneumocephalus patient. We propose an experimental setup that simulates the intracranial hydrodynamics of a pneumocephalus patient during flight. It consists of an acrylic box (skull), air-filled balloon [intracranial air (ICA)], water-filled balloon (cerebrospinal fluid and blood) and agarose gel (brain). The cabin was replicated using a custom-made pressure chamber. The setup can measure the rise in ICP during depressurization to levels similar to that inside the cabin at cruising altitude. ΔICP, i.e. the difference between mean cruising ICP and initial ICP, was found to increase with ICA volume and ROC. However, ΔICP was independent of the initial ICP. The largest ΔICP was 5 mmHg; obtained when ICA volume and ROC were 20 ml and 1,600 ft/min, respectively. The postulated ICA expansion and the subsequent increase in ICP in pneumocephalus patients during flight were successfully quantified in a laboratory setting. Based on the quantitative and qualitative analyses of the results, an ICA volume of 20 ml and initial ICP of 15 mmHg were recommended as conservative thresholds that are required for safe air travel among pneumocephalus patients. This study provides laboratory data that may be used by doctors to advise post-neurosurgical patients if they can safely fly.
    Matched MeSH terms: Aircraft*
  9. Sirunyan AM, Tumasyan A, Adam W, Ambrogi F, Bergauer T, Brandstetter J, et al.
    Phys Rev Lett, 2020 May 22;124(20):202001.
    PMID: 32501048 DOI: 10.1103/PhysRevLett.124.202001
    A measurement is reported of the jet mass distribution in hadronic decays of boosted top quarks produced in pp collisions at sqrt[s]=13  TeV. The data were collected with the CMS detector at the LHC and correspond to an integrated luminosity of 35.9  fb^{-1}. The measurement is performed in the lepton+jets channel of tt[over ¯] events, where the lepton is an electron or muon. The products of the hadronic top quark decay t→bW→bqq[over ¯]^{'} are reconstructed as a single jet with transverse momentum larger than 400 GeV. The tt[over ¯] cross section as a function of the jet mass is unfolded at the particle level and used to extract a value of the top quark mass of 172.6±2.5  GeV. A novel jet reconstruction technique is used for the first time at the LHC, which improves the precision by a factor of 3 relative to an earlier measurement. This highlights the potential of measurements using boosted top quarks, where the new technique will enable future precision measurements.
    Matched MeSH terms: Aircraft
  10. Lim GHC, Lim BCW, Flaherty GT
    J Travel Med, 2020 03 13;27(2).
    PMID: 31808935 DOI: 10.1093/jtm/taz096
    Matched MeSH terms: Aircraft*
  11. Ng WL, Abdullah N
    Singapore Med J, 2020 Feb;61(2):81-85.
    PMID: 32152640 DOI: 10.11622/smedj.2020016
    INTRODUCTION: Medical emergencies occur at a rate of one in 604‒753 flights. Doctors travelling on commercial flights may encounter an in-flight medical emergency requiring their assistance. There is a paucity of studies on how confident primary care doctors are in managing in-flight medical emergencies. This study aimed to determine the knowledge, confidence and attitude of primary care doctors in managing in-flight medical emergencies.

    METHODS: A cross-sectional study was conducted on all primary care doctors working in government health clinics in Kuala Lumpur, Malaysia, from October 2016 to November 2016. A self-reported questionnaire was used, which included questions on demographic information, knowledge of in-flight medicine, and the attitude and confidence of primary care doctors in managing in-flight medical emergencies.

    RESULTS: 182 doctors completed the questionnaire (92.9% response rate). The mean knowledge score was 8.9 out of a maximum score of 20. Only 11.5% of doctors felt confident managing in-flight medical emergencies. The majority (69.2%) would assist in an in-flight medical emergency, but the readiness to assist was reduced if someone else was already helping or if they were not familiar with the emergency. Total knowledge score was positively associated with confidence in managing in-flight medical emergencies (p = 0.03).

    CONCLUSION: Only one in ten primary care doctors in this study felt confident managing in-flight medical emergencies. A higher total knowledge score of in-flight medical emergencies was positively associated with greater confidence in managing them. Educational programmes to address this gap in knowledge may be useful to improve doctors' confidence in managing in-flight medical emergencies.

    Matched MeSH terms: Aircraft*
  12. MUHAMMAD SYUKRI HANAFI BASRI, MOHAMMAD AIZAT BASIR, AHMAD FAIZAL AHMAD FUAD
    MyJurnal
    Life jacket is one of the safety appliances that can be found on the ship that provide buoyancy and prevention against drowning. Before the ship can sail, every element of safety of the vessel should be confirmed. Despite the establishment of standards for life jacket, both local and international, there have been cases of drowning associated with the usage of life jackets by the passengers of passenger boat/vessels for open-deck situation. Moreover, deficiency of information on safety instruction is reason the passengers are lack of personal safety information during on board. Thus, the evaluation on safety standard of life jackets and passenger vessel are vital for assessing the provision of the life jacket on board passenger vessel with respect to compatibility between life jacket and passenger vessel. In this paper, A Vessel Life Jacket Compatibility Mobile Apps (VELIT) was developed using software development methodology called Rational Unified Process (RUP) to automate the safety assessment process based on model called LCI (Life Jacket Compatibility Index). VELIT apps synchronized the safety assessment aspect and which allow user to compute the element in the model and produce the result of the safety assessment in real time. The VELIT apps are expected to be used in maritime area especially for ship safety assessment process.
    Matched MeSH terms: Aircraft
  13. NURFARAHIN IDRUS, NORIZAN MOHAMED
    MyJurnal
    Airline industry is one of the largest industries in the world of transport because it is the most important transport in the global transport system. The airline industry has played a very important role in the economic development in Malaysia. Due to the increase in its operating business, the demand for air travel increases day by day. Hence, this study focused on the number of passengers using air transport in Malaysia. The monthly data from January 2005 to December 2015 were obtained from Malaysia Airport Holdings Berhad (MAHB) in Sepang, Selangor. The data is divided into 2 parts, which are in sample data from January 2005 to December 2014 and out sample data from January 2015 to December 2015. The study was conducted to predict airline passengers in Malaysia using the Box-Jenkins model and Artificial Neural Network (ANN) model. Both models were studied to choose the best model. Mean Absolute Percentage Error (MAPE) and Mean Squared Error (MSE) were used to measure the performance of both models. SARIMA was selected as the best model for Box-Jenkins with MAPE and MSE were 7.3458388 and 2.67011 respectively while Multilayer Feed Forward Neural Network (MFFNN) with seven input variables, with MAPE and MSE, 7.251 and 0.0006 respectively were selected as the best model for Multilayer Feed Forward Neural Network (FFNN). In conclusion, these studies have proven that the Multilayer Feed Forward Neural Network (FFNN) model is the best model for considering airplanes in Malaysia compared to the SARIMA model.
    Matched MeSH terms: Aircraft
  14. Sirunyan AM, Tumasyan A, Adam W, Ambrogi F, Bergauer T, Brandstetter J, et al.
    Phys Rev Lett, 2019 Dec 13;123(24):241801.
    PMID: 31922872 DOI: 10.1103/PhysRevLett.123.241801
    Results are reported from a search for new particles that decay into a photon and two gluons, in events with jets. Novel jet substructure techniques are developed that allow photons to be identified in an environment densely populated with hadrons. The analyzed proton-proton collision data were collected by the CMS experiment at the LHC, in 2016 at sqrt[s]=13  TeV, and correspond to an integrated luminosity of 35.9  fb^{-1}. The spectra of total transverse hadronic energy of candidate events are examined for deviations from the standard model predictions. No statistically significant excess is observed over the expected background. The first cross section limits on new physics processes resulting in such events are set. The results are interpreted as upper limits on the rate of gluino pair production, utilizing a simplified stealth supersymmetry model. The excluded gluino masses extend up to 1.7 TeV, for a neutralino mass of 200 GeV and exceed previous mass constraints set by analyses targeting events with isolated photons.
    Matched MeSH terms: Aircraft
  15. Sirunyan AM, Tumasyan A, Adam W, Ambrogi F, Asilar E, Bergauer T, et al.
    Phys Rev Lett, 2019 Apr 05;122(13):132003.
    PMID: 31012605 DOI: 10.1103/PhysRevLett.122.132003
    The observation of single top quark production in association with a Z boson and a quark (tZq) is reported. Events from proton-proton collisions at a center-of-mass energy of 13 TeV containing three charged leptons (either electrons or muons) and at least two jets are analyzed. The data were collected with the CMS detector in 2016 and 2017 and correspond to an integrated luminosity of 77.4fb^{-1}. The increased integrated luminosity, a multivariate lepton identification, and a redesigned analysis strategy improve significantly the sensitivity of the analysis compared to previous searches for tZq production. The tZq signal is observed with a significance well over 5 standard deviations. The measured tZq production cross section is σ(pp→tZq→tℓ^{+}ℓ^{-}q)=111±13(stat)_{-9}^{+11}(syst)  fb, for dilepton invariant masses above 30 GeV, in agreement with the standard model expectation.
    Matched MeSH terms: Aircraft
  16. Nguyen HN, Nguyen TY, Tran KV, Tran TT, Nguyen TT, Phan VD, et al.
    Materials (Basel), 2019 Feb 16;12(4).
    PMID: 30781542 DOI: 10.3390/ma12040598
    Triple-layered composite plates are created by joining three composite layers using shear connectors. These layers, which are assumed to be always in contact and able to move relatively to each other during deformation, could be the same or different in geometric dimensions and material. They are applied in various engineering fields such as ship-building, aircraft wing manufacturing, etc. However, there are only a few publications regarding the calculation of this kind of plate. This paper proposes novel equations, which utilize Mindlin's theory and finite element modelling to simulate the forced vibration of triple-layered composite plates with layers connected by shear connectors subjected to a moving load. Moreover, a Matlab computation program is introduced to verify the reliability of the proposed equations, as well as the influence of some parameters, such as boundary conditions, the rigidity of the shear connector, thickness-to-length ratio, and the moving load velocity on the dynamic response of the composite plate.
    Matched MeSH terms: Aircraft
  17. Kadri U
    Sci Rep, 2019 Jan 29;9(1):912.
    PMID: 30696934 DOI: 10.1038/s41598-018-37626-z
    Recent analysis of data, recorded on March 8th 2014 at the Comprehensive Nuclear-Test-Ban Treaty Organisation's hydroacoustic stations off Cape Leeuwin Western Australia, and at Diego Garcia, has led to the development of an inverse model for locating impacting objects on the sea surface. The model employs the phase velocity of acoustic-gravity waves that radiate during the impact, and only considers their propagation in the water layer. Here, we address a significant characteristic of acoustic-gravity waves: the ability to penetrate through the sea-bottom, which modifies the propagation speed and thus the arrival time of signals at the hydrophone station. Therefore, we revisit some signals that are associated with the missing Malaysian Aeroplane MH370, and illustrate the role of sea-bottom elasticity on determining impact locations.
    Matched MeSH terms: Aircraft
  18. Rizal S, Ikramullah, Gopakumar DA, Thalib S, Huzni S, Abdul Khalil HPS
    Polymers (Basel), 2018 Nov 28;10(12).
    PMID: 30961241 DOI: 10.3390/polym10121316
    Natural fiber composites have been widely used for various applications such as automotive components, aircraft components and sports equipment. Among the natural fibers Typha spp have gained considerable attention to replace synthetic fibers due to their unique nature. The untreated and alkali-treated fibers treated in different durations were dried under the sun for 4 h prior to the fabrication of Typha fiber reinforced epoxy composites. The chemical structure and crystallinity index of composites were examined via FT-IR and XRD respectively. The tensile, flexural and impact tests were conducted to investigate the effect of the alkali treated Typha fibers on the epoxy composite. From the microscopy analysis, it was observed that the fracture mechanism of the composite was due to the fiber and matrix debonding, fiber pull out from the matrix, and fiber damage. The tensile, flexural and impact strength of the Typha fiber reinforced epoxy composite were increased after 5% alkaline immersion compared to untreated Typha fiber composite. From these results, it can be concluded that the alkali treatment on Typha fiber could improve the interfacial compatibility between epoxy resin and Typha fiber, which resulted in the better mechanical properties and made the composite more hydrophobic. So far there is no comprehensive report about Typha fiber reinforcing epoxy composite, investigating the effect of the alkali treatment duration on the interfacial compatibility, and their effect on chemical and mechanical of Typha fiber reinforced composite, which plays a vital role to provide the overall mechanical performance to the composite.
    Matched MeSH terms: Aircraft
  19. Sirunyan AM, Tumasyan A, Adam W, Ambrogi F, Asilar E, Bergauer T, et al.
    Phys Rev Lett, 2018 Oct 05;121(14):141802.
    PMID: 30339442 DOI: 10.1103/PhysRevLett.121.141802
    This Letter presents the results of a search for pair-produced particles of masses above 100 GeV that each decay into at least four quarks. Using data collected by the CMS experiment at the LHC in 2015-2016, corresponding to an integrated luminosity of 38.2  fb^{-1}, reconstructed particles are clustered into two large jets of similar mass, each consistent with four-parton substructure. No statistically significant excess of data over the background prediction is observed in the distribution of average jet mass. Pair-produced squarks with dominant hadronic R-parity-violating decays into four quarks and with masses between 0.10 and 0.72 TeV are excluded at 95% confidence level. Similarly, pair-produced gluinos that decay into five quarks are also excluded with masses between 0.10 and 1.41 TeV at 95% confidence level. These are the first constraints that have been placed on pair-produced particles with masses below 400 GeV that decay into four or five quarks, bridging a significant gap in the coverage of R-parity-violating supersymmetry parameter space.
    Matched MeSH terms: Aircraft
  20. Sirunyan AM, Tumasyan A, Adam W, Ambrogi F, Asilar E, Bergauer T, et al.
    Phys Rev Lett, 2018 Sep 21;121(12):121801.
    PMID: 30296133 DOI: 10.1103/PhysRevLett.121.121801
    The observation of the standard model (SM) Higgs boson decay to a pair of bottom quarks is presented. The main contribution to this result is from processes in which Higgs bosons are produced in association with a W or Z boson (VH), and are searched for in final states including 0, 1, or 2 charged leptons and two identified bottom quark jets. The results from the measurement of these processes in a data sample recorded by the CMS experiment in 2017, comprising 41.3  fb^{-1} of proton-proton collisions at sqrt[s]=13  TeV, are described. When combined with previous VH measurements using data collected at sqrt[s]=7, 8, and 13 TeV, an excess of events is observed at m_{H}=125  GeV with a significance of 4.8 standard deviations, where the expectation for the SM Higgs boson is 4.9. The corresponding measured signal strength is 1.01±0.22. The combination of this result with searches by the CMS experiment for H→bb[over ¯] in other production processes yields an observed (expected) significance of 5.6 (5.5) standard deviations and a signal strength of 1.04±0.20.
    Matched MeSH terms: Aircraft
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links