MyMedR

Properties of the tray adhesive of an addition polymerizing silicone to impression tray materials

Sulong MZ, Setchell DJ

J Prosthet Dent, 1991 Dec;66(6):743-7.

Adhesive bond strength studies for the tray adhesive of an addition vinyl polysiloxane (President) impression material were conducted with an acrylic resin, chromium-plated brass, and plastic trays. Tensile and shear stress studies were performed on the Instron Universal testing machine. Acrylic resin specimens roughened with 80-grit silicon carbide paper exhibited appreciably higher bond strengths compared with different types of tray material and methods of surface preparation.

Matched MeSH terms: Alloys/chemistry

Flexibility and hardness of dental stainless steel wrought wires used in Thailand

Benjakul P, Cheunarrom C, Ongthiemsak C

J Oral Sci, 2001 Mar;43(1):15-9.

PMID: 11383631

Stainless steel wrought wires used as clasp arms for removable partial dentures in Thailand were compared with those used in some other countries (in the as-received condition) in terms of flexibility, Vickers microhardness and composition. The results showed that there were significant differences (P< or =0.05) among the wires. A Japanese stainless steel wire (SK) was obviously different from the others. It had the lowest proportional limit and microhardness, but its flexibility was almost the same. The chemical composition of each wire was not greatly different. The wires were about 18-20 wt% chromium and 8-9 wt% nickel, except for the SK wire, which had about 12 wt% nickel.

Matched MeSH terms: Dental Alloys/chemistry*

A case report of reattachment of fractured root fragment and resin-composite reinforcement in a compromised endodontically treated root

Lui JL

Dent Traumatol, 2001 Oct;17(5):227-30.

PMID: 11678543

The composite reinforcement technique has been used clinically to salvage damaged root-filled teeth compromised by caries, trauma, developmental abnormalities, internal resorption and iatrogenic causes. This clinical case report describes the use of the technique to reattach a fractured fragment in a compromised endodontically treated root besides reinforcing it for continued function in the mouth. Factors of clinical importance related to this additional application; including reattachment of tooth fragments, post crown retention, coronal microleakage and fracture resistance and strength, are also briefly discussed.

Matched MeSH terms: Metal Ceramic Alloys/chemistry

Copper vapour laser ID labelling on metal dentures and restorations

Ling BC, Nambiar P, Low KS, Lee CK

J Forensic Odontostomatol, 2003 Jun;21(1):17-22.

PMID: 12793127

Denture marking is accepted as a means of identifying dentures and persons in geriatric institutions, or post-mortem during war, crimes, civil unrest, natural and mass disasters. Labelling on the acrylic resin component of the denture can easily be damaged or destroyed by fire but on cobalt-chromium components it would be more resistant. A copper vapour laser (CVL) can be used to label the cobalt-chromium components of dentures and metal restorations easily, and legibly, and miniaturised for the incorporation of more personal particulars necessary for the identification of the deceased person. The CVL beam is focussed by its optics and delivered to the material surface by the two-axis scanner mounted with mirrors. A personal computer controls the movement of the scanner and the firing of the CVL. The high peak power of the pulsed CVL is focussed to very high energy density producing plasma ablation of the alloy surface. Very fine markings of a few microns width can be produced enabling the storage of detailed information of the deceased person on a metal surface for the purpose of rapid identification.

Matched MeSH terms: Chromium Alloys/chemistry

Effect of sintering temperature on the properties of modified mechanical alloyed CaCu3Ti4O12

Hutagalung SD, Ying OL, Ahmad ZA

IEEE Trans Ultrason Ferroelectr Freq Control, 2007 Dec;54(12):2587-91.

PMID: 18276560 DOI: 10.1109/TUFFC.2007.582

This paper presents the effects of calcination time and sintering temperature on the properties of CaCu(3)Ti(4)O(12). Electroceramic material of CaCu(3)Ti(4)O(12) was prepared using a modified mechanical alloying technique that covers several processes, which are preparation of raw material, mixing and ball milling for 5 hours, calcination, pellet forming and, sintering. The objective of this modified technique is to enable the calcination and sintering processes to be carried out at a shorter time and lower temperature. The x-ray diffraction (XRD) analysis result shows that a single-phase of CaCu(3)Ti(4)O(12) was completely formed by calcination at 750 degrees C for 12 hours. Meanwhile, the grain size of a sample sintered at 1050 degrees C for 24 hours is extremely large, in the range of 20-50 mum obtained from field emission scanning electron microscopy (FESEM) images. The dielectric constant value of 14,635 was obtained at 10 kHz by impedance (LCR) meter in the sintered sample at 1050 degrees C. However, the dielectric constant value of samples sintered at 900 and 950 degrees C is quite low, in the range of 52-119.

Matched MeSH terms: Alloys/chemistry*

Evaluation of load at fracture of Procera AllCeram copings using different luting cements

Al-Makramani BMA, Razak AAA, Abu-Hassan MI

J Prosthodont, 2008 Feb;17(2):120-124.

PMID: 18047490 DOI: 10.1111/j.1532-849X.2007.00270.x

PURPOSE: The current study investigated the effect of different luting agents on the fracture resistance of Procera AllCeram copings.

METHODS: Six master dies were duplicated from the prepared maxillary first premolar tooth using nonprecious metal alloy (Wiron 99). Thirty copings (Procera AllCeram) of 0.6-mm thickness were manufactured. Three types of luting media were used: zinc phosphate cement (Elite), glass ionomer cement (Fuji I), and dual-cured composite resin cement (Panavia F). Ten copings were cemented with each type. Two master dies were used for each group, and each of them was used to lute five copings. All groups were cemented according to manufacturer's instructions and received a static load of 5 kg during cementation. After 24 hours of distilled water storage at 37 degrees C, the copings were vertically compressed using a universal testing machine at a crosshead speed of 1 mm/min.

RESULTS: ANOVA revealed significant differences in the load at fracture among the three groups (p < 0.001). The fracture strength results showed that the mean fracture strength of zinc phosphate cement (Elite), glass ionomer cement (Fuji I), and resin luting cement (Panavia F) were 1091.9 N, 784.8 N, and 1953.5 N, respectively.

CONCLUSION: Different luting agents have an influence on the fracture resistance of Procera AllCeram copings.

Matched MeSH terms: Chromium Alloys/chemistry

Edentulous arch treatment with a CAD/CAM screw-retained framework and cemented crowns: a clinical case report

Baig MR, Rajan G, Rajan M

J Oral Implantol, 2009;35(6):295-9.

PMID: 20017646 DOI: 10.1563/AAID-JOI-D-09-00012R1.1

This article describes the rehabilitation of a completely edentulous patient using a milled titanium implant framework and cemented crowns. This combined approach significantly offsets unsuitable implant position, alignment, or angulation, while ensuring the easy retrievability, repair, and maintenance of the prosthesis. Hence, the dual advantage of cemented-retained crowns reproducing appropriate esthetics and function, irrespective of where the screw access openings are located in the substructure, can be obtained, along with the splinting effect and management of soft and hard tissue deficits achievable with a screw-retained framework.

Matched MeSH terms: Metal Ceramic Alloys/chemistry

Effect of aging on coronal microleakage in access cavities through metal ceramic crowns restored with resin composites

Al-Maqtari AA, Lui JL

J Prosthodont, 2010 Jul;19(5):347-56.

PMID: 20456026 DOI: 10.1111/j.1532-849X.2010.00593.x

The purpose of this in vitro study was to determine if packable resin composite with/without flowable resin composite has the ability to prevent coronal leakage in restored endodontic access openings following aging.

Matched MeSH terms: Dental Alloys/chemistry; Metal Ceramic Alloys/chemistry*

Full-arch metal-resin cement- and screw-retained provisional restoration for immediately loaded implants

Baig MR, Rajan G

J Oral Implantol, 2010;36(3):219-23.

PMID: 20553176 DOI: 10.1563/AAID-JOI-D-09-00048

Abstract This article describes the clinical and laboratory procedures involved in the fabrication of laboratory-processed, provisional, screw-retained, implant-supported maxillary and mandibular fixed complete dentures incorporating a cast metal reinforcement for immediate loading of implants. Precise fit is achieved by intraoral luting of the cast frame to milled abutments. Effective splinting of all implants is attained by the metal substructure and retrievability is provided by the screw-retention of the prosthesis.

Matched MeSH terms: Chromium Alloys/chemistry; Dental Alloys/chemistry

Fulltext Response Ant Colony Optimization of end milling surface roughness

Kadirgama K, Noor MM, Abd Alla AN

Sensors (Basel), 2010;10(3):2054-63.

PMID: 22294914 DOI: 10.3390/s100302054

Metal cutting processes are important due to increased consumer demands for quality metal cutting related products (more precise tolerances and better product surface roughness) that has driven the metal cutting industry to continuously improve quality control of metal cutting processes. This paper presents optimum surface roughness by using milling mould aluminium alloys (AA6061-T6) with Response Ant Colony Optimization (RACO). The approach is based on Response Surface Method (RSM) and Ant Colony Optimization (ACO). The main objectives to find the optimized parameters and the most dominant variables (cutting speed, feedrate, axial depth and radial depth). The first order model indicates that the feedrate is the most significant factor affecting surface roughness.

Matched MeSH terms: Alloys/chemistry

Association of human papillomavirus with denture wearing

Saini R, Osman NB, Ismail M, Sobri FM, Tang TH, Santhanam J

J Investig Clin Dent, 2011 Nov;2(4):241-7.

PMID: 25426895 DOI: 10.1111/j.2041-1626.2011.00068.x

To determine the prevalence of human papillomavirus in the oral cavity of denture wearers.

Matched MeSH terms: Chromium Alloys/chemistry

Fulltext Comparison of self- and conventional-ligating brackets in the alignment stage

Wahab RM, Idris H, Yacob H, Ariffin SH

Eur J Orthod, 2012 Apr;34(2):176-81.

PMID: 21478298 DOI: 10.1093/ejo/cjq179

This prospective study investigated the difference in clinical efficiency between Damon™ 3 self-ligating brackets (SLB) compared with Mini Diamond conventional ligating brackets (CLBs) during tooth alignment in straightwire fixed appliance therapy. Twenty-nine patients (10 males and 19 females), aged between 14 and 30 years, were randomly divided into two groups: 14 patients received the SLB and 15 received the CLB. Upper arch impressions were taken for pre-treatment records (T(0)). A transpalatal arch was soldered to both maxillary first molar bands prior to extraction of the maxillary first premolars, followed by straightwire fixed appliances (0.022 × 0.028 inch). A 0.014 inch nickel titanium (NiTi) wire was used as the levelling and aligning archwire. Four monthly reviews were undertaken and impressions of the upper arch were taken at each appointment (T(1), T(2), T(3), and T(4)). Displacements of the teeth were determined using Little's irregularity index (LII). Data were analysed using the Mann-Whitney U-test. In the aligning stage, the CLB group showed significantly faster alignment of the teeth compared with the SLB group at the T(1)-T(2) interval (P < 0.05). However, there were no differences at T(2)-T(3), and T(3)-T(4) for either group (P > 0.05). The CLB group showed 98 per cent crowding alleviation compared with 67 per cent for the SLB after 4 months of alignment and levelling. Mini Diamond brackets aligned the teeth faster than Damon™ 3 but only during the first month. There was no difference in efficacy between the two groups in the later 3 weeks. Alleviation of crowding was faster with CLB than with SLB.

Matched MeSH terms: Dental Alloys/chemistry

Metal-ceramic screw-retained implant fixed partial denture with intraoral luted framework to improve passive fit

Baig MR, Gunaseelan R

J Oral Implantol, 2012 Apr;38(2):149-53.

PMID: 20932151 DOI: 10.1563/AAID-JOI-D-09-00089

Passive fit of a long-span screw-retained implant prosthesis is an important criteria for the success of the restoration. This article describes a technique for fabricating a ceramometal implant fixed dental prosthesis (FDP) for a long-span partially edentulous situation by altering the conventional screw-retained design. The possibility of a passive fit is maximized by intraoral luting of the cast frame to milled abutments, and the potential framework distortion during fabrication is compensated to a major extent. Retrievability is ensured by screw retention of the prosthesis to the implants. Compared with conventional porcelain fused to metal screw-retained FDP, this prosthesis is relatively inexpensive to fabricate.

Matched MeSH terms: Metal Ceramic Alloys/chemistry*

Zygomatic implant-retained fixed complete denture for an elderly patient

Baig MR, Rajan G, Yunus N

Gerodontology, 2012 Jun;29(2):e1140-5.

PMID: 21615782 DOI: 10.1111/j.1741-2358.2010.00433.x

Dental rehabilitation of a completely edentulous geriatric patient has always been a challenge to the clinician, especially in treating those with higher expectations and demands. Treatment duration and the amount of residual alveolar bone available are often important considerations when planning for dental implant-based fixed treatment for these patients. With the introduction of zygomatic implants, a graftless alternative solution has emerged for deficient maxillary bone with provision for immediate loading. This article describes the treatment of a completely edentulous elderly patient using zygomatic implants in conjunction with conventional implants. The implants were immediately loaded using a definitive acrylic resin fixed denture reinforced with a cast metal framework, to provide function and aesthetics.

Matched MeSH terms: Chromium Alloys/chemistry

The effect of oleic acid stabilizer on the surface properties of bimetallic PtNi catalysts

Abu Bakar NH, Abu Bakar M, Bettahar MM, Ismail J, Monteverdi S

J Nanosci Nanotechnol, 2013 Jul;13(7):5034-43.

PMID: 23901527

A detailed study on the surface properties of oleic acid-stabilized PtNi nanoparticles supported on silica is reported. The oleic acid-stabilized PtNi nanoparticles were synthesized using NaBH4 as the reducing agent at various temperatures and oleic acid concentrations, prior to incorporation onto the silica support. X-ray diffraction studies of the unsupported oleic acid-stabilized PtNi particles revealed that the PtNi existed as alloys. Upon incorporation onto silica support, surface properties of the catalysts were investigated using H2-temperature reduction (H2-TPR), H2-temperature desorption (H2-TPD) and H2-chemisorption techniques. It was found that for the bimetallic catalysts, no oxides or very little oxidation occurred. Furthermore, these catalysts exhibited both Pt and Ni active sites on its surface though the availability of Ni active sites was dominant. A comparison of the surface properties of these materials with those prepared without oleic acid in our previous work [N. H. H. Abu Bakar et al., J. Catal. 265, 63 (2009)] and how they affect the hydrogenation of benzene is also discussed.

Matched MeSH terms: Alloys/chemistry

Closed hollow bulb obturator--one-step fabrication: a clinical report

Buzayan MM, Ariffin YT, Yunus N

J Prosthodont, 2013 Oct;22(7):591-5.

PMID: 23551843 DOI: 10.1111/jopr.12036

A method is described for the fabrication of a closed hollow bulb obturator prosthesis using a hard thermoforming splint material and heat-cured acrylic resin. The technique allowed the thickness of the thermoformed bulb to be optimized for weight reduction, while the autopolymerized seal area was covered in heat-cured acrylic resin, thus eliminating potential leakage and discoloration. This technique permits the obturator prosthesis to be processed to completion from the wax trial denture without additional laboratory investing, flasking, and processing.

Matched MeSH terms: Chromium Alloys/chemistry

A comparative evaluation of cleaning efficacy (debris and smear layer removal) of hand and two NiTi rotary instrumentation systems (K3 and ProTaper): a SEM study

Reddy KB, Dash S, Kallepalli S, Vallikanthan S, Chakrapani N, Kalepu V

J Contemp Dent Pract, 2013 Nov 1;14(6):1028-35.

PMID: 24858745

The present study was conducted to compare the cleaning efficacy (debris and smear layer removal) of hand and two NiTi rotary instrumentation systems (K3 and ProTaper).

Matched MeSH terms: Dental Alloys/chemistry*

Fulltext Enhancement of the wear resistance and microhardness of aluminum alloy by Nd:YaG laser treatment

Hussein HT, Kadhim A, Al-Amiery AA, Kadhum AA, Mohamad AB

ScientificWorldJournal, 2014;2014:842062.

PMID: 25136694 DOI: 10.1155/2014/842062

Influence of laser treatment on mechanical properties, wear resistance, and Vickers hardness of aluminum alloy was studied. The specimens were treated by using Nd:YaG laser of energy 780 mj, wavelength 512 nm, and duration time 8 ns. The wear behavior of the specimens was studied for all specimens before and after treatment by Nd:YaG laser and the dry wear experiments were carried out by sing pinon-disc technique. The specimens were machined as a disk with diameter of 25 mm and circular groove in depth of 3 mm. All specimens were conducted by scanning electron microscopy (SEM), energy-dispersive X-ray fluorescence analysis (EDS), optical microscopy, and Vickers hardness. The results showed that the dry wear rate was decreased after laser hardening and increased Vickers hardness values by ratio of 2.4:1. The results showed that the values of wear rate for samples having circular grooves are less than samples without grooves after laser treatment.

Matched MeSH terms: Alloys/chemistry*

Multidisciplinary treatment approach to restore deep horizontally fractured maxillary central incisor

Patil PG, Nimbalkar-Patil SP, Karandikar AB

J Contemp Dent Pract, 2014 Jan 1;15(1):112-5.

PMID: 24939276

This case report demonstrates sequential periodontic, orthodontic and prosthodontic treatment modalities to save and restore deep horizontally fractured maxillary central incisor. The location of fracture was deep in the mucosa which reveals less than 2 mm of tooth structure to receive the crown. The procedures like surgical crown lengthening, endodontic post placement, orthodontic forced eruption, core build-up and metal-ceramic crown restoration were sequentially performed to conserve the fractured tooth. Forced eruption is preferred to surgical removal of supporting alveolar bone, since forced eruption preserves the biologic width, maintains esthetics, and at the same time exposes sound tooth structure for the placement of restorative margins.

Matched MeSH terms: Metal Ceramic Alloys/chemistry

Fulltext Effect of multipath laser shock processing on microhardness, surface roughness, and wear resistance of 2024-T3 Al alloy

Kadhim A, Salim ET, Fayadh SM, Al-Amiery AA, Kadhum AA, Mohamad AB

ScientificWorldJournal, 2014;2014:490951.

PMID: 24737973 DOI: 10.1155/2014/490951

Laser shock processing (LSP) is an innovative surface treatment technique with high peak power, short pulse, and cold hardening for strengthening metal materials. LSP is based on the application of a high intensity pulsed laser beam (I > 1 GW/cm(2); t < 50 ns) at the interface between the metallic target and the surrounding medium (a transparent confining material, normally water) forcing a sudden vaporization of the metallic surface into a high temperature and density plasma that immediately develops inducing a shock wave propagating into the material. The shock wave induces plastic deformation and a residual stress distribution in the target material. In this paper we study the increase of microhardness and surface roughness with the increase of laser pulse energy in 2024-T3 Al alloy. The influence of the thickness of the confining layer (water) on microhardness and surface roughness is also studied. In addition, the effect of LSP treatment with best conditions on wear behaviors of the alloy was investigated.

Matched MeSH terms: Alloys/chemistry*

Displaying publications 1 - 20 of 34 in total