MyMedR

Displaying publications 1 - 20 of 160 in total

Abstract:

Sort:

Physicochemical parameters of Bakun reservoir in Belaga, Sarawak, Malaysia, 13 months after reaching full supply level

Ling Ty, Lee Nyanti, Theresa Muan, Jongkar Grinang, Siong-fong Sim, Aazani Mujahid

Sains Malaysiana, 2016;45:157-166.

Determining the water quality of Bakun Reservoir 13 months after it operates at full supply level is crucial for better understanding of changes in the physicochemical parameters, which may enable the prediction of its effects on the survival of aquatic life in the reservoir. This study determined 13 physicochemical parameters at six stations within the reservoir at fixed depths. The results showed that the minimum 5 mg/L of dissolved oxygen (DO) required for sensitive aquatic organisms was recorded at 6 m depth. However, DO was not detectable at depths exceeding 7 m. The water was acidic at depths of more than 10 m. Turbidity and total suspended solids increased corresponding with depth. Inorganic nitrogen were predominantly in the form of ammonia-nitrogen, creating an unhealthy environment for aquatic life. Concentration of Chl-a was significantly higher at the subsurface water than 30 m depth in four out of six stations. The present study shows changes in water quality as compared to the pre-impounded period and 15 months after the filling phase, in particular, stratification of dissolved oxygen, thermocline conditions and alkalinity. The changes varied according to the distance from the dam and may have been influenced by existing land developments within the area such as the construction of the Murum Hydroelectric Dam, oil palm plantations and timber concessionares. Though the water quality might have deteriorated, further study is needed to determine if this condition will prolong.

Matched MeSH terms: Ammonia
Comparison of the efficiencies of attached- versus suspended-growth SBR systems in the treatment of recycled paper mill wastewater

Muhamad MH, Sheikh Abdullah SR, Abu Hasan H, Abd Rahim RA

J Environ Manage, 2015 Nov 1;163:115-24.
PMID: 26311084 DOI: 10.1016/j.jenvman.2015.08.012

The complexity of residual toxic organics from biologically treated effluents of pulp and paper mills is a serious concern. To date, it has been difficult to choose the best treatment technique because each of the available options has advantages and drawbacks. In this study, two different treatment techniques using laboratory-scale aerobic sequencing batch reactors (SBRs) were tested with the same real recycled paper mill effluent to evaluate their treatment efficiencies. Two attached-growth SBRs using granular activated carbon (GAC) with and without additional biomass and a suspended-growth SBR were used in the treatment of real recycled paper mill effluent at a chemical oxygen demand (COD) level in the range of 800-1300 mg/L, a fixed hydraulic retention time of 24 h and a COD:N:P ratio of approximately 100:5:1. The efficiency of this biological treatment process was studied over a 300-day period. The six most important wastewater quality parameters, namely, chemical oxygen demand (COD), turbidity, ammonia (expressed as NH3-N), phosphorus (expressed as PO4(3)-P), colour, and suspended solids (SS), were measured to compare the different treatment techniques. It was determined that these processes were able to almost completely and simultaneously eliminate COD (99%) and turbidity (99%); the removals of NH3-N (90-100%), PO4(3)-P (66-78%), colour (63-91%), and SS (97-99%) were also sufficient. The overall performance results confirmed that an attached-growth SBR system using additional biomass on GAC is a promising configuration for wastewater treatment in terms of performance efficiency and process stability under fluctuations of organic load. Hence, this hybrid system is recommended for the treatment of pulp and paper mill effluents.

Matched MeSH terms: Ammonia/analysis
Preparation and characterization of polysulfone/zeolite mixed matrix membranes for removal of low-concentration ammonia from aquaculture wastewater

Moradihamedani P, Abdullah AH

Water Sci Technol, 2018 Jan;77(1-2):346-354.
PMID: 29377819 DOI: 10.2166/wst.2017.545

Removal of low-concentration ammonia (1-10 ppm) from aquaculture wastewater was investigated via polysulfone (PSf)/zeolite mixed matrix membrane. PSf/zeolite mixed matrix membranes with different weight ratios (90/10, 80/20, 70/30 and 60/40 wt.%) were prepared and characterized. Results indicate that PSf/zeolite (80/20) was the most efficient membrane for removal of low-concentration ammonia. The ammonia elimination by PSf/zeolite (80/20) from aqueous solution for 10, 7, 5, 3 and 1 ppm of ammonia was 100%, 99%, 98.8%, 96% and 95% respectively. The recorded results revealed that pure water flux declined in higher loading of zeolite in the membrane matrix due to surface pore blockage caused by zeolite particles. On the other hand, ammonia elimination from water was decreased in higher contents of zeolite because of formation of cavities and macrovoids in the membrane substructure.

Matched MeSH terms: Ammonia/analysis*; Ammonia/chemistry
The PAL2 promoter activities in relation to structural development and adaptation in Arabidopsis thaliana

Wong JH, Namasivayam P, Abdullah MP

Planta, 2012 Feb;235(2):267-77.
PMID: 21874349 DOI: 10.1007/s00425-011-1506-9

Phenylalanine ammonia lyase (PAL) plays a major role in plant growth, development and adaptation. In Arabidopsis thaliana, the enzyme is encoded by four genes, namely PAL1, PAL2, PAL3, and PAL4 with PAL1 and PAL2 being closely related phylogenetically and functionally. PAL1 promoter activities are associated with plant development and are inducible by various stress agents. However, PAL2 promoter activities have not been functionally analysed. Here, we show that the PAL2 promoter activities are associated with the structural development of a plant and its organs. This function was inducible in an organ-specific manner by the avirulent strain of Pseudomonas syringae pv. tomato (JL1065). The PAL2 promoter was active throughout the course of the plant development particularly in the root, rosette leaf, and inflorescence stem that provide the plant with structural support. In aerial organs, the levels of PAL2 promoter activities were negatively correlated with relative positions of the organs to the rosette leaves. The promoter was inducible in the root following an inoculation by JL1065 in the leaf suggesting PAL2 to be part of an induced defence system. Our results demonstrate how the PAL2 promoter activities are being coordinated and synchronised for the structural development of the plant and its organs based on the developmental programme. Under certain stress conditions the activity may be induced in favour of certain organs.

Matched MeSH terms: Phenylalanine Ammonia-Lyase/genetics; Phenylalanine Ammonia-Lyase/metabolism*
Characterization of promoter of EgPAL1, a novel PAL gene from the oil palm Elaeis guineensis Jacq

Yusuf CYL, Abdullah JO, Shaharuddin NA, Abu Seman I, Abdullah MP

Plant Cell Rep, 2018 Feb;37(2):265-278.
PMID: 29090330 DOI: 10.1007/s00299-017-2228-7

KEY MESSAGE: The oil palm EgPAL1 gene promoter and its regulatory region were functional as a promoter in the heterologous system of Arabidopsis according to the cis-acting elements present in that region. The promoter was developmentally regulated, vascular tissue specific and responsive to water stress agents. Phenylalanine ammonia lyase (PAL, EC 4.3.1.24) is the key enzyme of the phenylpropanoid pathway which plays important roles in plant development and adaptation. To date, there is no report on the study of PAL from oil palm (Elaeis guineensis), an economically important oil crop. In this study, the 5' regulatory sequence of a highly divergent oil palm PAL gene (EgPAL1) was isolated and fused with GUS in Arabidopsis to create two transgenic plants carrying the minimal promoter with (2302 bp) and without its regulatory elements (139 bp). The regulatory sequence contained cis-acting elements known to be important for plant development and stress response including the AC-II element for lignin biosynthesis and several stress responsive elements. The promoter and its regulatory region were fully functional in Arabidopsis. Its activities were characterised by two common fundamental features of PAL which are responsive to plant internal developmental programme and external factors. The promoter was developmentally regulated in certain organs; highly active in young organs but less active or inactive in mature organs. The presence of the AC elements and global activity of the EgPAL1 promoter in all organs resembled the property of lignin-related genes. The existence of the MBS element and enhancement of the promoter activity by PEG reflected the behaviour of drought-responsive genes. Our findings provide a platform for evaluating oil palm gene promoters in the heterologous system of Arabidopsis and give insights into the activities of EgPAL1 promoter in oil palm.

Matched MeSH terms: Phenylalanine Ammonia-Lyase/classification; Phenylalanine Ammonia-Lyase/genetics*
Fulltext Effects of Supplementation of Mulberry (Morus alba) Foliage and Urea-rice Bran as Fermentable Energy and Protein Sources in Sheep Fed Urea-treated Rice Straw Based Diet

Yulistiani D, Jelan ZA, Liang JB, Yaakub H, Abdullah N

Asian-Australas J Anim Sci, 2015 Apr;28(4):494-501.
PMID: 25656207 DOI: 10.5713/ajas.14.0406

A digestibility study was conducted to evaluate the effects of supplementing mulberry foliage and urea rice-bran as a source of fermentable energy and protein to 12 sheep fed diets based on urea-treated rice straw (TRS). The three dietary treatments were: T1, TRS with mulberry; T2, TRS with 50% mulberry replaced with rice bran and urea; and T3, TRS with rice bran and urea. The study was arranged in a completely randomized design with four replications for each treatment. The sheep were fed one of the three diets and the supplements were offered at 1.2% of the body weight (BW) and the TRS was provided ad libitum. There were no differences (p>0.05) among the three treatment groups with respect to dry matter (DM) intake (76.8±4.2 g/kg BW(0.75)) and DM, organic matter (OM), and crude protein (CP) digestibility (55.3±1.22; 69.9±0.85; 46.3±1.65% respectively for DM, OM, and CP). The digestibility of fiber (neutral detergent fiber [NDF] and acid detergent fiber) was significantly lower (p<0.05) for T3 (46.2 and 46.6 respectively) compared to T1 (55.8 and 53.7 respectively) and T2 (54.1 and 52.8 respectively). Nitrogen (N) intake by sheep on diet T3 was significantly (p<0.05) higher than sheep fed diet T1. However, N balance did not differ among the three diets (3.0±0.32 g/d). In contrast, the rumen ammonia (NH3-N) concentrations in sheep fed T2 and T3 were significantly (p<0.05) higher than in sheep fed T1. The NH3-N concentrations for all three diets were above the critical value required for optimum rumen microbial growth and synthesis. Total volatile fatty acid concentrations were highest (p<0.05) in T1 (120.3 mM), whilst the molar proportion of propionic acid was highest in T3 (36.9%). However, the microbial N supply in sheep fed T1 and T3 was similar but was significantly (p<0.05) higher than for sheep fed T2. It was concluded that mulberry foliage is a potential supplement of fermentable energy and protein for sheep fed TRS based diet. The suggested level of supplementation is 1.2% of BW or 32% of the total diet since it resulted in similar effects on the intake of DM, OM, and NDF, digestibility of DM, OM, and CP, N utilization and microbial supply when compared to rice bran and urea supplementation.

Matched MeSH terms: Ammonia
Physicochemical factors and their potential sources inferred from long-term rainfall measurements at an urban and a remote rural site in tropical areas

Khan MF, Maulud KNA, Latif MT, Chung JX, Amil N, Alias A, et al.

Sci Total Environ, 2018 Feb 01;613-614:1401-1416.
PMID: 29898507 DOI: 10.1016/j.scitotenv.2017.08.025

Air pollution can be detected through rainwater composition. In this study, long-term measurements (2000-2014) of wet deposition were made to evaluate the physicochemical interaction and the potential sources of pollution due to changes of land use. The rainwater samples were obtained from an urban site in Kuala Lumpur and a highland-rural site in the middle of Peninsular Malaysia. The compositions of rainwater were obtained from the Malaysian Meteorological Department. The results showed that the urban site experienced more acidity in rainwater (avg=277mm, range of 13.8 to 841mm; pH=4.37) than the rural background site (avg=245mm, range of 2.90 to 598mm; pH=4.97) due to higher anthropogenic input of acid precursors. The enrichment factor (EF) analysis showed that at both sites, SO42-, Ca2+ and K+ were less sensitive to seawater but were greatly influenced by soil dust. NH4+ and Ca2+ can neutralise a larger fraction of the available acid ions in the rainwater at the urban and rural background sites. However, acidifying potential was dominant at urban site compared to rural site. Source-receptor relationship via positive matrix factorisation (PMF 5.0) revealed four similar major sources at both sites with a large variation of the contribution proportions. For urban, the major sources influence on the rainwater chemistry were in the order of secondary nitrates and sulfates>ammonium-rich/agricultural farming>soil components>marine sea salt and biomass burning, while at the background site the order was secondary nitrates and sulfates>marine sea salt and biomass burning=soil components>ammonia-rich/agricultural farming. The long-term trend showed that anthropogenic activities and land use changes have greatly altered the rainwater compositions in the urban environment while the seasonality strongly affected the contribution of sources in the background environment.

Matched MeSH terms: Ammonia
Natural rubber latex skin testing reagents: safety and diagnostic accuracy of nonammoniated latex, ammoniated latex, and latex rubber glove extracts

Hamilton RG, Adkinson NF

J Allergy Clin Immunol, 1996 Nov;98(5 Pt 1):872-83.
PMID: 8939150

BACKGROUND: Nonammoniated latex, ammoniated latex, and rubber glove extracts are the only sources of natural rubber (Hevea brasiliensis) latex that have potential for use as skin testing reagents in the diagnosis of latex allergy. Their diagnostic sensitivity and specificity as skin test reagents are unknown.
OBJECTIVE: We conducted a phase 1/2 clinical study to examine the safety and diagnostic accuracy (sensitivity and specificity) of nonammoniated latex, ammoniated latex, and rubber glove extracts as skin test extracts to identify the most efficacious source material for future skin test reagent development.
METHODS: Twenty-four adults not allergic to latex, 19 adults with hand dermatitis or pruritus, and 59 adults with a latex allergy were identified by clinical history. All provided blood and then received puncture skin tests and intradermal skin tests with nonammoniated latex, ammoniated latex, and rubber glove extracts from Malaysian H. brasiliensis latex by use of sequential titration. A glove provocation test and IgE anti-latex RAST were used to clarify positive history-negative skin test response and negative history-positive skin test response mismatches.
RESULTS: All three extracts were biologically safe and sterile. After normalization to 1 mg/ml of total protein, all three extracts produced equivalent diagnostic sensitivity and specificity in puncture skin tests and intradermal skin tests at various extract concentrations. Optimal diagnostic accuracy was safely achieved at 100 micrograms/ml for intradermal skin tests (e.g., nonammoniated latex: puncture skin test sensitivity 96%, specificity 100%; intradermal skin test sensitivity 93%, specificity 96%). The presence of IgE antibody in skin was highly correlated with IgE anti-latex in serum (nonammoniated latex: r = 0.98, p < 0.001; ammoniated latex: r = 0.94, p < 0.001; rubber glove extract: r = 0.96, p < 0.001). All five available subjects with a positive history, negative skin test response, and absence of IgE antibody in serum had a negative glove provocation test response, indicating no clinical evidence of latex allergy. No systemic or large local allergic reactions were observed with puncture skin tests or intradermal skin tests.
CONCLUSIONS: Equivalent diagnostic sensitivity and specificity were observed with the nonammoniated latex, ammoniated latex, and rubber glove extract skin test reagents after normalization for total protein; nonammoniated latex may be considered the reagent of choice on the basis of practical quality control and reproducibility considerations.

Matched MeSH terms: Ammonia
Optimization of stabilized leachate treatment using ozone/persulfate in the advanced oxidation process

Abu Amr SS, Aziz HA, Adlan MN

Waste Manag, 2013 Jun;33(6):1434-41.
PMID: 23498721 DOI: 10.1016/j.wasman.2013.01.039

The objective of this study was to investigate the performance of employing persulfate reagent in the advanced oxidation of ozone to treat stabilized landfill leachate in an ozone reactor. A central composite design (CCD) with response surface methodology (RSM) was applied to evaluate the relationships between operating variables, such as ozone and persulfate dosages, pH, and reaction time, to identify the optimum operating conditions. Quadratic models for the following four responses proved to be significant with very low probabilities (<0.0001): COD, color, NH3-N, and ozone consumption (OC). The obtained optimum conditions included a reaction time of 210 min, 30 g/m(3) ozone, 1g/1g COD0/S2O8(2-) ratio, and pH 10. The experimental results were corresponded well with predicted models (COD, color, and NH3-N removal rates of 72%, 96%, and 76%, respectively, and 0.60 (kg O3/kg COD OC). The results obtained in the stabilized leachate treatment were compared with those from other treatment processes, such as ozone only and persulfate S2O8(2-) only, to evaluate its effectiveness. The combined method (i.e., O3/S2O8(2-)) achieved higher removal efficiencies for COD, color, and NH3-N compared with other studied applications. Furthermore, the new method is more efficient than ozone/Fenton in advanced oxidation process in the treatment of the same studied leachate.

Matched MeSH terms: Ammonia/chemistry
Ammoniacal nitrogen and COD removal from semi-aerobic landfill leachate using a composite adsorbent: fixed bed column adsorption performance

Halim AA, Aziz HA, Johari MA, Ariffin KS, Adlan MN

J Hazard Mater, 2010 Mar 15;175(1-3):960-4.
PMID: 19945216 DOI: 10.1016/j.jhazmat.2009.10.103

The performance of a carbon-mineral composite adsorbent used in a fixed bed column for the removal of ammoniacal nitrogen and aggregate organic pollutant (COD), which are commonly found in landfill leachate, was evaluated. The breakthrough capacities for ammoniacal nitrogen and COD adsorption were 4.46 and 3.23 mg/g, respectively. Additionally, the optimum empty bed contact time (EBCT) was 75 min. The column efficiency for ammoniacal nitrogen and COD adsorption using fresh adsorbent was 86.4% and 92.6%, respectively, and these values increased to 90.0% and 93.7%, respectively, after the regeneration process.

Matched MeSH terms: Ammonia/chemistry*
Fulltext A survey of benthic assemblages of foraminifera in tropical coastal waters of pulau pinang, malaysia

Minhat FI, Yahya K, Talib A, Ahmad O

Trop Life Sci Res, 2013 Aug;24(1):35-43.
PMID: 24575240 MyJurnal

The distribution of benthic Foraminifera throughout the coastal waters of Taman Negara Pulau Pinang (Penang National Park), Malaysia was studied to assess the impact of various anthropogenic activities, such as fishing, ecotourism and floating cage culture. Samples were obtained at 200 m intervals within the subtidal zone, extending up to 1200 m offshore at Teluk Bahang, Teluk Aling, Teluk Ketapang and Pantai Acheh. The depth within coastal waters ranged between 1.5 m and 10.0 m, with predominantly muddy substrate at most stations. Water quality analysis showed little variation in micronutrient (nitrite, NO2; nitrate, NO3; ammonia, NH4 and orthophosphate, PO4) concentrations between sampling stations. Temperature (29.6±0.48°C), salinity (29.4±0.28 ppt), dissolved oxygen content (5.4±0.95 mg/l) and pH (8.5± 0.13) also showed little fluctuation between stations. A total of nine genera of foraminifera were identified in the study (i.e., Ammonia, Elphidium, Ammobaculites, Bigenerina, Quinqueloculina, Reopax, Globigerina, Textularia and Nonion). The distribution of benthic foraminifera was dominated by opportunistic groups that have a high tolerance to anthropogenic stressors. Ammonia had the highest frequency of occurrence (84.7%), followed by Bigenerina (50%), Ammobaculites (44.2%) and Elphidium (38.9%). The Ammonia-Elphidium Index (AEI) was used to describe the hypoxic condition of benthic communities at all sites. Teluk Bahang had the highest AEI value. The foraminiferal assemblages and distribution in Teluk Bahang, Teluk Aling, Teluk Ketapang and Pantai Acheh showed no correlation with physical or chemical environmental parameters.

Matched MeSH terms: Ammonia
Optimisation of culture composition for glyphosate degradation byBurkholderia vietnamiensisstrain AQ5-12

Manogaran M, Shukor MY, Yasid NA, Khalil KA, Ahmad SA

3 Biotech, 2018 Feb;8(2):108.
PMID: 29430369 DOI: 10.1007/s13205-018-1123-4

The herbicide glyphosate is often used to control weeds in agricultural lands. However, despite its ability to effectively kill weeds at low cost, health problems are still reported due to its toxicity level. The removal of glyphosate from the environment is usually done by microbiological process since chemical process of degradation is ineffective due to the presence of highly stable bonds. Therefore, finding glyphosate-degrading microorganisms in the soil of interest is crucial to remediate this glyphosate.Burkholderia vietnamiensisstrain AQ5-12 was found to have glyphosate-degrading ability. Optimisation of biodegradation condition was carried out utilising one factor at a time (OFAT) and response surface methodology (RSM). Five parameters including carbon and nitrogen source, pH, temperature and glyphosate concentration were optimised. Based on OFAT result, glyphosate degradation was observed to be optimum at fructose concentration of 6, 0.5 g/L ammonia sulphate, pH 6.5, temperature of 32 °C and glyphosate concentration at 100 ppm. Meanwhile, RSM resulted in a better degradation with 92.32% of 100 ppm glyphosate compared to OFAT. The bacterium was seen to tolerate up to 500 ppm glyphosate while increasing concentration results in reduced degradation and bacterial growth rate.

Matched MeSH terms: Ammonia
Fulltext Water quality data in a shallow and narrow Setiu Lagoon

Zainol Z, Akhir MF, Johari A, Ali A

Data Brief, 2021 Apr;35:106866.
PMID: 33816725 DOI: 10.1016/j.dib.2021.106866

This article contains water quality data collected in a shallow and narrow Setiu Lagoon during the southwest monsoon, wet period of northeast monsoon and dry period of northeast monsoon. The surface water quality parameters, which include the temperature, salinity, chlorophyll-a and nutrients (ammonia, nitrate, phosphate, and silicate) were sampled twice per day (high and low tides) at a total of eight stations. Hourly current speed and direction was obtained from mooring of two units of current meters. Compared to the Malaysia Marine Water Quality Criteria and Standard (MWQCS), nutrients in Setiu Lagoon were in Class 2. Although limited, this dataset can provide insights on the changes of water quality condition in Setiu Lagoon under the presence of anthropogenic pressures.

Matched MeSH terms: Ammonia
Removal of ammoniacal nitrogen (N-NH3) from municipal solid waste leachate by using activated carbon and limestone

Aziz HA, Adlan MN, Zahari MS, Alias S

Waste Manag Res, 2004 Oct;22(5):371-5.
PMID: 15560441

The presence of ammoniacal nitrogen (N-NH3) in leachate is one of the problems normally faced by landfill operators. Slow leaching of wastes producing nitrogen and no significant mechanism for transformation of N-NH3 in the landfills causes a high concentration of ammoniacal nitrogen in leachate over a long period of time. A literature review showed that the removal of ammoniacal nitrogen from leachate was not well documented and to date, there were limited studies in Malaysia on this aspect, especially in adsorption treatment. The main objective of the present study was to investigate the suitability of activated carbon, limestone and a mixture of both materials as a filtering medium, in combination with other treatments capable of attenuating ammoniacal nitrogen which is present in significant quantity (between 429 and 1909 mg L(-1)) in one of the landfill sites in Malaysia. The results of the study show that about 40% of ammoniacal nitrogen with concentration of more than 1000 mg L(-1) could be removed either by activated carbon or a mixture of carbon with limestone at mixture ratio of 5:35. This result shows that limestone is potentially useful as a cost-effective medium to replace activated carbon for ammoniacal nitrogen removal at a considerably lower cost.

Matched MeSH terms: Ammonia/chemistry*
Co-treatment of landfill leachate and municipal wastewater using the ZELIAC/zeolite constructed wetland system

Mojiri A, Ziyang L, Tajuddin RM, Farraji H, Alifar N

J Environ Manage, 2016 Jan 15;166:124-30.
PMID: 26496842 DOI: 10.1016/j.jenvman.2015.10.020

Constructed wetland (CW) is a low-cost alternative technology to treat wastewater. This study was conducted to co-treat landfill leachate and municipal wastewater by using a CW system. Typha domingensis was transplanted to CW, which contains two substrate layers of adsorbents, namely, ZELIAC and zeolite. Response surface methodology and central composite design have been utilized to analyze experimental data. Contact time (h) and leachate-to-wastewater mixing ratio (%; v/v) were considered as independent variables. Colour, COD, ammonia, nickel, and cadmium contents were used as dependent variables. At optimum contact time (50.2 h) and leachate-to-wastewater mixing ratio (20.0%), removal efficiencies of colour, COD, ammonia, nickel, and cadmium contents were 90.3%, 86.7%, 99.2%, 86.0%, and 87.1%, respectively. The accumulation of Ni and Cd in the roots and shoots of T. domingensis was also monitored. Translocation factor (TF) was >1 in several runs; thus, Typha is classified as a hyper-accumulator plant.

Matched MeSH terms: Ammonia
Application of urea based SNCR system in the combustion effluent containing low level of baseline nitric oxide

Hossain KA, Mohd-Jaafar MN, Appalanidu KB, Mustafa A, Ani FN

Environ Technol, 2005 Mar;26(3):251-9.
PMID: 15881021

Selective Non-Catalytic Reduction (SNCR) of nitric oxide has been studied experimentally by injecting aqueous urea solution with and without additive in a pilot-scale diesel fired tunnel furnace at 3.4% excess oxygen level and with low ppm of baseline NO(x) ranging from 65 to 75 ppm within the investigated temperature range. The tests have been carried out using commercial grade urea as NO(x) reducing agent and commercial grade sodium carbonate as additive. The furnace simulated the small-scale combustion systems, where the operating temperatures are usually in the range of about 973 to 1323 K and NO(x) emission level remains below 100 ppm. With 5% plain urea solution, at Normalized Stoichiometric Ratio (NSR) of 4 as much as 54% reduction was achieved at 1128 K, whilst in the additive case the NO(x) reduction was improved to as much as 69% at 1093 K. Apart from this improvement, in the additive case, the effective temperature window as well as peak temperature of NO(x) reduction shifted towards lower temperatures. The result is quite significant, especially for this investigated level of baseline NO(x). The ammonia slip measurements showed that in both cases the slip was below 16 ppm at NSR of 4 and optimum temperature of NO(x) reduction. Finally, the investigations demonstrated that urea based SNCR is quite applicable to small-scale combustion applications and commercial grade sodium carbonate is a potential additive.

Matched MeSH terms: Ammonia/analysis*
Fulltext Characterization, purification and identification of some Alkaloids in Datura Stramonium

Babiker, F., Jamal, P., Mirghani, M.E.S., Ansari, A.H.

International Food Research Journal, 2017;24(101):540-543.
MyJurnal

This study aimed at investigating the presence of alkaloids and other chemical constituents in Datura stramonium (Saikaran, Jimson weed). All parts of the plant were dried, crushed and then underwent extraction by soxhlet and maceration methods. The solvents used in these methods were normal hexane (nonpolar) and ethanol (polar). Thin Layer Chromatography (TLC) and FTIR techniques were used to analyse the chemical components of jimson weed. The results showed the presence of hyoscine in all plant parts while atropine in the seeds only. The best separation was found to be when the solvent system was acetone: water: ammonia (90:07:03). Maceration method is the best and cost effective procedure for extraction.

Matched MeSH terms: Ammonia
Assessing the cost efficiency and benefits of sawdust, pinewood, and rubber wood shavings as bedding materials

Zailani NIM, Hanis F, Anuar MAM

J Equine Vet Sci, 2024 Mar;134:105018.
PMID: 38316315 DOI: 10.1016/j.jevs.2024.105018

This study aimed to evaluate the benefits of using sawdust, pinewood shavings, and rubber wood shavings as horse bedding materials. Nine horses were used in a repeated measure design, where each horse was provided with each of the bedding materials for two consecutive weeks. The weight, cost, mucking out time, ammonia emissions, and urine holding capacity were measured and calculated for each bedding material. Results showed that pinewood shavings had the highest urine-holding capacity, while rubber wood shavings had the lowest absorbency for urine. Pinewood shavings also had lower ammonia emissions compared to sawdust and rubber wood shavings but were significantly more expensive. Sawdust was the cheapest of the three bedding materials, but it was used in greater quantities, which required more time for mucking out. The findings from this study could be used to make informed decisions on bedding materials for stables, taking into consideration the trade-off between cost, maintenance requirements, and labor hours.

Matched MeSH terms: Ammonia*
Impacts of pig farming on the water quality of Serin River, Sarawak

Ling T, Layang H, Then Y, Apun K

Sains Malaysiana, 2006;35:45-50.

In Sarawak, pig farm operators are required to treat the wastewater containing pig waste and spilt food in oxidation ponds before discharge. However, information on the impact of this industry on surface water quality is lacking. Therefore, the objective of this study is to determine the impact of pig farm effluent on the water quality of Serin River and its tributaries. Results of analysis show that the tributary that received pond effluent has significantly higher mean of total suspended solids (TSS), biochemical oxygen demand (BOD5) chemical oxygen demand (COD), ammonia-nitrogen (NH3 -N), reactive phosphorus (SRP) and Escherichia coli (E. coli) concentrations when compared to those of the tributary that did not receive pond effluent. Comparisons between the stations upstream and downstream of the discharge point indicated that BOD5 and COD were significantly higher at the downstream station that received pond effluent. Dissolved oxygen (DO) was the lowest at the tributary receiving effluent from pig farms with a mean of 2.40 mg/l. According to the Interim Water Quality Standard of the Department of Environment, water quality at the tributary that received pig farm effluent falls into Class III whereas that of the other stations falls into Class II. It is recommended that further studies be conducted on the management of waste to explore the possibility of turning the waste into a resource so that water quality of rivers can remain pristine for drinking and recreation.

Matched MeSH terms: Ammonia
Physico-chemical method for ammonia removal from synthetic wastewater using limestone and GAC in batch and column studies

Hussain S, Aziz HA, Isa MH, Adlan MN, Asaari FA

Bioresour Technol, 2007 Mar;98(4):874-80.
PMID: 16716587

The purpose of the present study was to examine the removal of ammoniacal nitrogen (NH4-N) from synthetic wastewater using limestone (LS) and granular activated carbon (GAC) mixture as low cost adsorbent. In batch study, optimum shaking and settling times were 150 and 120 min, respectively. The LS-GAC mixture ratio of 25:15 removed about 58% NH4-N. The smaller particle size of medium yielded higher adsorption capacity. The equilibrium adsorption data followed the Freundlich isotherm (R2 > 0.98) but it showed weak bond. Adsorption kinetics were well described by the pseudo second-order rate model (R2 > 0.93). The upflow column showed that higher flow rate and initial concentration resulted in shorter column saturation time. The study showed that the usage of GAC could be reduced by combining GAC with LS for the removal of NH4-N from wastewater; thus reducing the cost of treatment.

Matched MeSH terms: Ammonia/isolation & purification*

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links