Displaying publications 1 - 20 of 677 in total

Abstract:
Sort:
  1. Md. Akhir, H., Ahmad, D., Rukunudin, I. H., Shamsuddin, S., A. Yahya
    MyJurnal
    This paper describes a study on the design, fabrication and testing of a prototype digging device for sweet potato tubers in bris soil. The soil texture was sandy soil (fine sand 94.53%), with mean moisture content of 9.16% and mean bulk density of 1.44 g-cm-3. The soil was prepared in a soil bin. Three types of soil digging tools were designed and fabricated to determine the optimum draft force. These were Flat or plane, V-shaped and Hoe type blades. Plane and V-shaped blades were 30 cm long, and 13 cm wide, while the Hoe type had three rods, 25 mm in diameter, 30 cm long and 6.5 cm wide with sharp cutting edge. The digging tools were tested in a soil bin filled with bris soil to determine the optimum draft force and area of soil disturbance. The results were analysed using statistical analysis of variance (ANOVA). Comparison between all blade types and blade depths to measured draft force and the area of soil disturbed showed that the highest draft of 0.54 kN-m-2 was caused by a flat or plane blade at the optimum depth of 20 cm when the area of soil disturbed was 0.180 m2 . The V-shaped blade had the mean draft of 0.51 kN-m-2, with area of soil disturbance of 0.185 m2 . Thebest choice was V-shaped blade with a rake angle of 30o at 20 cm. depth. The selected blade was fixed onto the sweet potato harvester and tested on bris soil planted with sweet potato of Telong and VitAto varieties. The harvesting efficiency of the machine in bris soil was 93.64% and 90.49% for Telong (Plot A) and VitAto (Plot B) varieties, respectively. The average ground speed and turning time during operation for plots A and B was 0.56 km-hr-1 and 102.7 s and 0.99 km-hr-1 and 81.22 s, respectively. The harvesting efficiencies for both plots showed no significant difference. The total productive time (harvesting time) and unproductive time (turning time) in plot A, at a tractor speed of 0.56 km.hr-1, was 14.8 hours for harvesting a hectare of sweet potato ( 0.068 ha.hr-1). In plot B, the total time for harvesting a hectare of sweet potato was 8.35 hours (0.12 ha.hr-1) at a tractor speed of 0.99 km.hr-1. The average harvesting time for both plots was 11.47 hr.ha-1. The average field work rate was 0.087 ha.hr-1 or 34 man-hr.ha-1 compared to manual harvesting of 150 man-hrs.ha-1.
    Matched MeSH terms: Analysis of Variance
  2. Malek NNA, Jawad AH, Ismail K, Razuan R, ALOthman ZA
    Int J Biol Macromol, 2021 Oct 31;189:464-476.
    PMID: 34450144 DOI: 10.1016/j.ijbiomac.2021.08.160
    A magnetic biocomposite blend of chitosan-polyvinyl alcohol/fly ash (m-Cs-PVA/FA) was developed by adding fly ash (FA) microparticles into the polymeric matrix of magnetic chitosan-polyvinyl alcohol (m-Cs-PVA). The effectiveness of m-Cs-PVA/FA as an adsorbent to remove textile dye (reactive orange 16, RO16) from aquatic environment was evaluated. The optimum adsorption key parameters and their significant interactions were determined by Box-Behnken Design (BBD). The analysis of variance (ANOVA) indicates the significant interactions can be observed between m-Cs-PVA/FA dose with solution pH, and m-Cs-PVA/FA dose with working temperature. Considering these significant interactions, the highest removal of RO16 (%) was found 90.3% at m-Cs-PVA/FA dose (0.06 g), solution pH (4), working temperature (30 °C), and contact time (17.5 min). The results of adsorption kinetics revealed that the RO16 adsorption was better described by the pseudo-second-order model. The results of adsorption isotherm indicated a multilayer adsorption process as well described by Freundlich model with maximum adsorption capacity of 123.8 mg/g at 30 °C. An external magnetic field can be easily applied to recover the adsorbent (m-Cs-PVA/FA). The results supported that the synthesized m-Cs-PVA/FA presents itself as an effective and promising adsorbent for textile dye with preferable adsorption capacity and separation ability during and after the adsorption process.
    Matched MeSH terms: Analysis of Variance
  3. Haruna Ahmed O, Aainaa Hasbullah N, Ab Majid NM
    ScientificWorldJournal, 2010 Oct 12;10:1988-95.
    PMID: 20953548 DOI: 10.1100/tsw.2010.196
    The world's tropical rainforests are decreasing at an alarming rate as they are converted to agricultural land, pasture, and plantations. Decreasing tropical forests affect global warming. As a result, afforestation progams have been suggested to mitigate this problem. The objective of this study was to determine the carbon and phosphorus accumulation of a rehabilitated forest of different ages. The size of the study area was 47.5 ha. Soil samples were collected from the 0-, 6-, 12-, and 17-year-old rehabilitated forest. Twenty samples were taken randomly with a soil auger at depths of 0-20 and 20-40 cm. The procedures outlined in the Materials and Methods section were used to analyze the soil samples for pH, total C, organic matter, total P, C/P ratio, yield of humic acid (HA), and cation exchange capacity (CEC). The soil pH decreased significantly with increasing age of forest rehabilitation regardless of depth. Age did not affect CEC of the rehabilitated forest. Soil organic matter (SOM), total C, and total P contents increased with age. However, C/P ratio decreased with time at 0-20 cm. Accumulation of HA with time and soil depth was not consistent. The rehabilitated forest has shown signs of being a C and P sink.
    Matched MeSH terms: Analysis of Variance
  4. Rahim TN, Mohamad D, Md Akil H, Ab Rahman I
    Dent Mater, 2012 Jun;28(6):e63-70.
    PMID: 22480722 DOI: 10.1016/j.dental.2012.03.011
    To determine the diffusion coefficient, water sorption and solubility of various types of restorative dental composites and to evaluate the effect of acidic media (orange juice and coke) on their characteristics.
    Matched MeSH terms: Analysis of Variance
  5. Soe HHK, Than NN, Lwin H, Phyu KL, Htay MNN, Moe S, et al.
    J Family Med Prim Care, 2018 9 21;7(4):756-761.
    PMID: 30234049 DOI: 10.4103/jfmpc.jfmpc_300_17
    Background: Disease surveillance is one of the major components to combat against infectious diseases. As health-care professionals are indispensable to mandatory notifiable disease surveillance, their knowledge and attitudes toward infectious disease notification played an important role for timely and effective reporting to the surveillance system. Therefore, we aimed to determine the knowledge of mandatory notifiable infectious diseases in Malaysia and attitude towards infectious disease reporting among final year medical students.

    Methods: A cross-sectional study was conducted from May to June 2017 in the private medical college in Malaysia.

    Materials and Methods: We purposively selected the final year (semester 10) medical students and a total of 124 students participated in this study. We collected data using a self-administered, structured questionnaire. Data were analyzed using descriptive statistics, independent t-test, and one-way analysis of variance.

    Results: Among the final year medical students, 47.5% had moderate knowledge but 4.2% had good knowledge of mandatory infectious disease notification. Only 3.2% of the students correctly answered all the notifiable diseases listed in the questionnaire. Most of the students had positive attitude toward communicable diseases reporting, rewards, and penalty for notification. There was no significant relationship between sociodemographic characteristics and knowledge and attitude of infectious disease notification.

    Conclusions: The majority of the final year medical students had moderate level of knowledge and positive attitude of infectious disease notification; however, there were some deficiencies. Better instruction and training on infectious disease notification procedures of Malaysia should be provided to the final year medical students which could not only reduce underreporting but also improve timely and effective reporting in future.

    Matched MeSH terms: Analysis of Variance
  6. Kadirgama K, Noor MM, Abd Alla AN
    Sensors (Basel), 2010;10(3):2054-63.
    PMID: 22294914 DOI: 10.3390/s100302054
    Metal cutting processes are important due to increased consumer demands for quality metal cutting related products (more precise tolerances and better product surface roughness) that has driven the metal cutting industry to continuously improve quality control of metal cutting processes. This paper presents optimum surface roughness by using milling mould aluminium alloys (AA6061-T6) with Response Ant Colony Optimization (RACO). The approach is based on Response Surface Method (RSM) and Ant Colony Optimization (ACO). The main objectives to find the optimized parameters and the most dominant variables (cutting speed, feedrate, axial depth and radial depth). The first order model indicates that the feedrate is the most significant factor affecting surface roughness.
    Matched MeSH terms: Analysis of Variance
  7. Ahmed Hamdi OA, Syed Abdul Rahman SN, Awang K, Abdul Wahab N, Looi CY, Thomas NF, et al.
    ScientificWorldJournal, 2014;2014:321943.
    PMID: 25126594 DOI: 10.1155/2014/321943
    Curcuma zedoaria also known as Temu putih is traditionally used in food preparations and treatment of various ailments including cancer. The cytotoxic activity of hexane, dichloromethane, ethyl acetate, methanol, and the methanol-soxhlet extracts of Curcuma zedoaria rhizomes was tested on two human cancer cell lines (Ca Ski and MCF-7) and a noncancer cell line (HUVEC) using MTT assay. Investigation on the chemical components in the hexane and dichloromethane fractions gave 19 compounds, namely, labda-8(17),12 diene-15,16 dial (1), dehydrocurdione (2), curcumenone (3), comosone II (4), curcumenol (5), procurcumenol (6), germacrone (7), zerumbone epoxide (8), zederone (9), 9-isopropylidene-2,6-dimethyl-11-oxatricyclo[6.2.1.0(1,5)]undec-6-en-8-ol (10), furanodiene (11), germacrone-4,5-epoxide (12), calcaratarin A (13), isoprocurcumenol (14), germacrone-1,10-epoxide (15), zerumin A (16), curcumanolide A (17), curcuzedoalide (18), and gweicurculactone (19). Compounds (1-19) were evaluated for their antiproliferative effect using MTT assay against four cancer cell lines (Ca Ski, MCF-7, PC-3, and HT-29). Curcumenone (3) and curcumenol (5) displayed strong antiproliferative activity (IC50 = 8.3 ± 1.0 and 9.3 ± 0.3 μg/mL, resp.) and were found to induce apoptotic cell death on MCF-7 cells using phase contrast and Hoechst 33342/PI double-staining assay. Thus, the present study provides basis for the ethnomedical application of Curcuma zedoaria in the treatment of breast cancer.
    Matched MeSH terms: Analysis of Variance
  8. Chaibakhsh N, Rahman MB, Basri M, Salleh AB, Abd-Aziz S
    Biotechnol J, 2010 Aug;5(8):848-55.
    PMID: 20632329 DOI: 10.1002/biot.201000063
    Dimethyl adipate (DMA) was synthesized by immobilized Candida antarctica lipase B-catalyzed esterification of adipic acid and methanol. To optimize the reaction conditions of ester production, response surface methodology was applied, and the effects of four factors namely, time, temperature, enzyme concentration, and molar ratio of substrates on product synthesis were determined. A statistical model predicted that the maximum conversion yield would be 97.6%, at the optimal conditions of 58.5 degrees C, 54.0 mg enzyme, 358.0 min, and 12:1 molar ratio of methanol to adipic acid. The R(2) (0.9769) shows a high correlation between predicted and experimental values. The kinetics of the reaction was also investigated in this study. The reaction was found to obey the ping-pong bi-bi mechanism with methanol inhibition. The kinetic parameters were determined and used to simulate the experimental results. A good quality of fit was observed between the simulated and experimental initial rates.
    Matched MeSH terms: Analysis of Variance
  9. Hosseini SM, Abdul Aziz H
    Bioresour Technol, 2013 Apr;133:240-7.
    PMID: 23428821 DOI: 10.1016/j.biortech.2013.01.098
    The effects of thermochemical pretreatment and continuous thermophilic conditions on the composting of a mixture of rice straw residue and cattle manure were investigated using a laboratory-scale composting reactor. Results indicate that the composting period of rice straw can be shortened to less than 10 days by applying alkali pre-treatment and continuous thermophilic composting conditions. The parameters obtained on day 9 of this study are similar to the criteria level published by the Canadian Council of Ministers of the Environment. The moisture content, organic matter reduction, pH level, electrical conductivity, total organic carbon reduction, soluble chemical oxygen demand reduction, total Kjeldahl nitrogen, carbon-to-nitrogen ratio, and germination index were 62.07%, 16.99%, 7.30%, 1058 μS/cm, 17.00%, 83.43%, 2.06%, 16.75%, and 90.33%, respectively. The results of this study suggest that the application of chemical-biological integrated processes under thermophilic conditions is a novel method for the rapid degradation and maturation of rice straw residue.
    Matched MeSH terms: Analysis of Variance
  10. Lee WC, Khoo BE, Bin Abdullah AF, Abdul Aziz ZB
    J Forensic Sci, 2013 May;58(3):658-63.
    PMID: 23488634 DOI: 10.1111/1556-4029.12103
    Bloodstain photography is important in forensic applications, especially for bloodstain pattern analysis. This study compares the enhancement effect of bloodstain photography using three different types of light source: fluorescent white light, near-ultraviolet (UV) light-emitting diode (LED) light, and 410 nm LED light. Randomized complete block designs were implemented to identify the lighting that would statistically produce the best enhancement results for bloodstains on different types of surfaces. Bloodstain samples were prepared on white cotton, brown carpet, tar road, and wood. These samples were photographed in darkroom conditions using a Canon EOS 50D digital SLR camera, with Canon EFS 60 mm f/2.8 Macro USM lens. Two-way analysis of variance and Fisher's least significant difference test were used to analyze the contrast of the images. The statistical analysis showed that 410 nm light is the best among the tested lights for enhancing bloodstains on the tested surfaces, where the contrast of bloodstain to background was the highest.
    Matched MeSH terms: Analysis of Variance
  11. Ajmal Iqbal, Shahen Shah, Mohammad Nisar, Abdul Ghafoor
    Sains Malaysiana, 2017;46:1727-1734.
    Twenty lines of Pisum sativum particularly developed for high yield and resistant to powdery mildew were evaluated along with two parents (Falloner and 11760-3ER) and two checks (Climex and a local cultivar) with the objectives to determine morphological characterization, yield potential and resistance to powdery mildew. On the basis of one way cluster, the 24 lines were mainly grouped into four clusters, especially on the vegetative and yield contributing traits. It was observed that the tall and high yielding lines were grouped in cluster-III while the dwarf and high yielding lines were grouped in cluster-IV. Analysis of variance (ANOVA) showed significant difference (p<0.05) in the yield of 24 pea lines. The average grain yield of the 24 pea lines ranged from 22.87 to 102.54 g. The highest grain yield was produced by PL-4 (102.54 g plant-1) followed by PL-5 (82.14 g plant-1). Of the 24 pea lines, two lines (PL-4 and PL-5) were highly resistant to powdery mildew disease. Therefore, the newly developed PL-4 and PL-5 lines were high yielding and highly resistant. Among the 19 morphological traits, six (Eigenvalue >1.0) contributed more than 80% variability among the materials.
    Matched MeSH terms: Analysis of Variance
  12. Ting HN, Zourmand A, Chia SY, Yong BF, Abdul Hamid B
    J Voice, 2012 Sep;26(5):664.e1-6.
    PMID: 22285457 DOI: 10.1016/j.jvoice.2011.08.008
    The formant frequencies of Malaysian Malay children have not been well studied. This article investigates the first four formant frequencies of sustained vowels in 360 Malay children aged between 7 and 12 years using acoustical analysis. Generally, Malay female children had higher formant frequencies than those of their male counterparts. However, no significant differences in all four formant frequencies were observed between the Malay male and female children in most of the vowels and age groups. Significant differences in all formant frequencies were found across the Malay vowels in both Malay male and female children for all age groups except for F4 in female children aged 12 years. Generally, the Malaysian Malay children showed a nonsystematic decrement in formant frequencies with age. Low levels of significant differences in formant frequencies were observed across the age groups in most of the vowels for F1, F3, and F4 in Malay male children and F1 and F4 in Malay female children.
    Matched MeSH terms: Analysis of Variance
  13. Hanani Yuhaniz, Asnawi Seraila, Suhaimi Muhammed, Abdul Hamid Saleh
    MyJurnal
    This study on anthropometrics of Primary School children from grade 1 to 5 in Peninsular Malaysia involves 2310 students aged seven to eleven years old. The objectives were to analyze the differentiation of anthropometrics between children of grades 1 to 5 and grouping them to suitable levels in which they are appropriate to propose chair dimensions. A multi-stage sampling method was used, and rural and urban areas were also included in providing anthropometric database that represents the whole Peninsular Malaysia population. There were six dimensions measured in this study, which are sitting shoulder, sitting subscapular height, sitting elbow height, hip width, buttock-popliteal length and popliteal height. All the measurements were chosen to represent dimensions needed to construct ergonomic school chair. From the results, ANOVA showed p-values of
    Matched MeSH terms: Analysis of Variance
  14. Zal U’yun Wan Mahmood, Che Abd Rahim Mohamed, Zaharudin Ahmad, Abdul Kadir Ishak
    Kajian ini dijalankan untuk melihat variasi taburan 210Po dan 210Pb melalui profil menegak aktivitinya, serta nisbah aktiviti 210Po/210Pb di dalam teras sedimen yang diambil di beberapa stesen persampelan pesisir pantai perairan Sarawak. Didapati profil taburan radionuklid tersebut dalam teras sedimen adalah berubah-ubah mengikut lokasi persampelan dan telah dibuktikan melalui analisis ANOVA yang menunjukkan bahawa terdapat perbezaan bererti pada 95% aras keyakinan bagi aktiviti 210Po (p = 0.000), 210Pb (p = 0.035) dan 210Po/210Pb (p = 0.000) di semua lokasi kajian. Secara umumnya, aktiviti 210Po dan 210Pb yang diukur masing-masing dalam julat 337 ke 2460 Bq/kg, 11 ke 84 Bq/kg di SR 01; 224 ke 2008 Bq/kg, 6 ke 80 Bq/kg di SR 02; 119 ke 1595 Bq/kg, 6 ke 84 Bq/kg di SR 03; 241 ke 2294 Bq/kg, 5 ke 82 Bq/kg di SR 04 dan 175 ke 1340 Bq/kg, 4 ke 44 Bq/kg di SR 05. Merujuk kepada julat tersebut, didapati aktiviti 210Po adalah lebih tinggi daripada aktiviti 210Pb dengan purata nisbah 210Po/210Pb di semua stesen adalah melebihi satu, iaitu dalam julat 20 ke 35. Variasi profil taburan radionuklid tersebut dipercayai dipengaruhi oleh beberapa faktor sekitaran dan telah dibuktikan terdapat korelasi yang kuat di antara taburan radionuklid dengan komposisi sedimen jenis kelodak (210Po:r = 0.701 dan 210Pb: r = 0.648), kedalaman air (210Po: r = -0.647) dan jarak stesen dari daratan (210Po: r = 0.746 dan 210Pb: r = 0.975). Oleh itu, dapat disimpulkan bahawa faktor-faktor tersebut merupakan penyumbang utama ke atas perubahan yang berlaku kepada taburan 210Po dan 210Pb.
    Matched MeSH terms: Analysis of Variance
  15. Alam MA, Juraimi AS, Rafii MY, Hamid AA, Arolu IW, Abdul Latif M
    C. R. Biol., 2015 Jan;338(1):1-11.
    PMID: 25468001 DOI: 10.1016/j.crvi.2014.10.007
    Genetic diversity and relationships among 45 collected purslane accessions were evaluated using ISSR markers. The 28 primers gave a total of 167 bands, among which 163 were polymorphic (97.6%). The genetic diversity as estimated by Shannon's information index was 0.513, revealing a quite high level of genetic diversity in the germplasm. The average number of observed allele, effective allele, expected heterozygosity, polymorphic information content (PIC) and Nei's index were 5.96, 1.59, 0.43, 0.35 and 0.35, respectively. The UPGMA dendrogram based on Nei's genetic distance grouped the whole germplasm into 7 distinct clusters. The analysis of molecular variance (AMOVA) revealed that 89% of total variation occurred within population, while 11% were found among populations. Based on the constructed dendrogram using ISSR markers those accessions that are far from each other by virtue of genetic origin and diversity index (like Ac1 and Ac42; Ac19 and Ac45; Ac9 and Ac23; Ac18 and A25; Ac24 and Ac18) are strongly recommended to select as parent for future breeding program to develop high yielding and stress tolerant purslane variety in contribution to global food security.
    Matched MeSH terms: Analysis of Variance
  16. Khalil KA, Mustafa S, Mohammad R, Ariff AB, Ahmad SA, Dahalan FA, et al.
    Int J Microbiol, 2019;2019:4208986.
    PMID: 31093290 DOI: 10.1155/2019/4208986
    Bovine gelatin is a biopolymer which has good potential to be used in encapsulating matrices for probiotic candidate Bifidobacterium pseudocatenulatum strain G4 (G4) because of its amphoteric nature characteristic. Beads were prepared by the extrusion method using genipin and sodium alginate as a cross-linking agent. The optimisation of bovine gelatin-genipin-sodium alginate combinations was carried out using face central composition design (FCCD) to investigate G4 beads' strength, before and after exposed to simulated gastric (SGF), intestinal fluids (SIF), and encapsulation yield. A result of ANOVA and the polynomial regression model revealed the combinations of all three factors have a significant effect (p < 0.05) on the bead strength. Meanwhile, for G4 encapsulation yield, only genipin showed less significant effect on the response. However, the use of this matrix remained due to the intermolecular cross-linking ability with bovine gelatin. Optimum compositions of bovine gelatin-genipin-sodium alginate were obtained at 11.21% (w/v), 1.96 mM, and 2.60% (w/v), respectively. A model was validated for accurate prediction of the response and showed no significant difference (p > 0.05) with experimental values.
    Matched MeSH terms: Analysis of Variance
  17. Lim YH, Foo HL, Loh TC, Mohamad R, Abdul Rahim R
    Molecules, 2020 Feb 11;25(4).
    PMID: 32054138 DOI: 10.3390/molecules25040779
    Tryptophan is one of the most extensively used amino acids in livestock industry owing to its effectiveness in enhancing the growth performance of animals. Conventionally, the production of tryptophan relies heavily on genetically modified Escherichia coli but its pathogenicity is a great concern. Our recent study demonstrated that a lactic acid bacterium (LAB), Pediococcus acidilactici TP-6 that isolated from Malaysian food was a promising tryptophan producer. However, the tryptophan production must enhance further for viable industrial application. Hence, the current study evaluated the effects of medium components and optimized the medium composition for tryptophan production by P. acidilactici TP-6 statistically using Plackett-Burman Design, and Central Composite Design. The optimized medium containing molasses (14.06 g/L), meat extract (23.68 g/L), urea (5.56 g/L) and FeSO4 (0.024 g/L) significantly enhanced the tryptophan production by 150% as compared to the control de Man, Rogosa and Sharpe medium. The findings obtained in this study revealed that rapid evaluation and effective optimization of medium composition governing tryptophan production by P. acidilactici TP-6 were feasible via statistical approaches. Additionally, the current findings reveal the potential of utilizing LAB as a safer alternative tryptophan producer and provides insight for future exploitation of various amino acid productions by LAB.
    Matched MeSH terms: Analysis of Variance
  18. Sazwi NN, Nalina T, Abdul Rahim ZH
    PMID: 24330738 DOI: 10.1186/1472-6882-13-351
    Betel quid chewing is a popular habit in Southeast Asia. It is believed that chewing betel quid could reduce stress, strengthen teeth and maintain oral hygiene. The aim of this study was to investigate the antioxidant and cytoprotective activities of each of the ingredients of betel quid and compared with betel quid itself (with and without calcium hydroxide). The correlation of their cytoprotective and antioxidant activities with phenolic content was also determined.
    Matched MeSH terms: Analysis of Variance
  19. Low WZ, Khoo BE, Abdullah AFLB
    J Forensic Sci, 2018 Jul;63(4):1092-1098.
    PMID: 29178492 DOI: 10.1111/1556-4029.13702
    A new contactless technique for latent fingerprint visualization on nonporous curved surfaces of circular cross section was introduced by Low et al. (1). The technique utilizes a plane mirror to convey the light rays toward the inspected surfaces for latent fingerprint visualization. This research activity came up as an extension of the previous study which utilized an aluminum plate as the plane mirror to illuminate the inspected surfaces. Dulling spray was used to increase the diffuse component of the reflective aluminum plate. However, the amount of dulling spray will affect the uniformity of the illumination on the inspected curved surfaces. In this study, a study on the new materials for the plane mirror was carried out. Coated aluminum, opal, and ground glass diffusers were selected as the new materials. The performance of the new materials was compared to the aluminum based on the quality of the captured images on various nonporous cylindrical surfaces. A statistical approach known as randomized complete block design was used to design the experiment. The quality of the captured images was obtained using Spectral Image Validation and Verification. Two-way analysis of variance and Fisher's least significant difference test were used to analyze the quality of the images. From the results of the statistical analysis, coated aluminum has the best performance compared to aluminum, opal, and ground glass diffusers.
    Matched MeSH terms: Analysis of Variance
  20. Salimon J, Salih N, Abdullah BM
    J Biomed Biotechnol, 2012;2012:693848.
    PMID: 22346338 DOI: 10.1155/2012/693848
    Linoleic acid (LA) is converted to per-carboxylic acid catalyzed by an immobilized lipase from Candida antarctica (Novozym 435). This per-carboxylic acid is only intermediate and epoxidized itself in good yields and almost without consecutive reactions. Monoepoxide linoleic acid 9(12)-10(13)-monoepoxy 12(9)-octadecanoic acid (MEOA) was optimized using D-optimal design. At optimum conditions, higher yield% (82.14) and medium oxirane oxygen content (OOC) (4.91%) of MEOA were predicted at 15 μL of H(2)O(2), 120 mg of Novozym 435, and 7 h of reaction time. In order to develop better-quality biolubricants, pour point (PP), flash point (FP), viscosity index (VI), and oxidative stability (OT) were determined for LA and MEOA. The results showed that MEOA exhibited good low-temperature behavior with PP of -41(°)C. FP of MEOA increased to 128(°)C comparing with 115(°)C of LA. In a similar fashion, VI for LA was 224 generally several hundred centistokes (cSt) more viscous than MEOA 130.8. The ability of a substance to resist oxidative degradation is another important property for biolubricants. Therefore, LA and MEOA were screened to measure their OT which was observed at 189 and 168(°)C, respectively.
    Matched MeSH terms: Analysis of Variance
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links