Displaying publications 1 - 20 of 372 in total

Abstract:
Sort:
  1. Vincent M, Pometto AL, van Leeuwen JH
    J Microbiol Biotechnol, 2011 Jul;21(7):703-10.
    PMID: 21791956
    Enzymatic saccharification of corn stover using Phanerochaete chrysosporium and Gloeophyllum trabeum and subsequent fermentation of the saccharification products to ethanol by Saccharomyces cerevisiae and Escherichia coli K011 were achieved. Prior to simultaneous saccharification and fermentation (SSF) for ethanol production, solid-state fermentation was performed for four days on ground corn stover using either P. chrysosporium or G. trabeum to induce in situ cellulase production. During SSF with S. cerevisiae or E. coli, ethanol production was the highest on day 4 for all samples. For corn stover treated with P. chrysosporium, the conversion to ethanol was 2.29 g/100 g corn stover with S. cerevisiae as the fermenting organism, whereas for the sample inoculated with E. coli K011, the ethanol production was 4.14 g/100 g corn stover. Corn stover treated with G. trabeum showed a conversion 1.90 and 4.79 g/100 g corn stover with S. cerevisiae and E. coli K011 as the fermenting organisms, respectively. Other fermentation co-products, such as acetic acid and lactic acid, were also monitored. Acetic acid production ranged between 0.45 and 0.78 g/100 g corn stover, while no lactic acid production was detected throughout the 5 days of SSF. The results of our experiment suggest that it is possible to perform SSF of corn stover using P. chrysosporium, G. trabeum, S. cerevisiae and E. coli K011 for the production of fuel ethanol.
    Matched MeSH terms: Biofuels*
  2. Anisuzzaman, S.M., Krishnaiah, D., Bono, A., Lahin, F.A., Suali, E., Zuyyin, I.A.Z.
    MyJurnal
    In this study, simulation and optimisation of the purification of bioethanol from an azeotropic mixture was done using the Aspen HYSYS and the Response Surface Methodology (RSM), respectively, to achieve an acceptable bioethanol content with minimal energy use. The objective of this study is to develop the simulation process of bioethanol production from a fermentation effluent. Additionally, the effects of parameters such as solvent temperature, number of entrainer feed stage, mass flow rate and third components of the process for production of bioethanol were studied. As bioethanol is a product of biofuel production, the main challenge facing bioethanol production is the separation of high purity ethanol. However, the separation of ethanol and water can be achieved with the addition of a suitable solvent such as 1,3-butylene glycol (13C4Diol), mixture 13C4Diol and ethylene glycol (EGlycol) and mixture 13C4Diol and glycol ethyl ether (DEG) in the extractive distillation process. For the 13C4Diol mixture, the temperature of entrainer is 90oC with 1500 kg/hr of entrainer rate, while the number of entrainer feed stage is one. The optimum conditions for mixture 13C4Diol and EGlycol require a temperature of entrainer of 90.77oC with an entrainer rate of 1500 kg/hr, while the number of entrainer feed stage is one. Lastly, for optimum conditions for the mixture 13C4Diol and DEG, the temperature of entrainer should be 90oC with an entrainer rate of 1564.04 kg/hr, while the number of entrainer feed stage is one. This study shows that process simulation and optimisation can enhance the removal of water from an azeotropic mixture.
    Matched MeSH terms: Biofuels
  3. Heng GC, Isa MH, Lim JW, Ho YC, Zinatizadeh AAL
    Environ Sci Pollut Res Int, 2017 Dec;24(35):27113-27124.
    PMID: 28963706 DOI: 10.1007/s11356-017-0287-5
    Biological treatments, such as activated sludge process, are common methods to treat municipal and industrial wastewaters. However, they produce huge amounts of waste activated sludge (WAS). The excess sludge treatment and disposal are a challenge for wastewater treatment plants due to economic, environmental, and regulatory factors. In this study, photo-Fenton pretreatment (oxidation using hydrogen peroxide and iron catalyst aided with UV light) was optimized using response surface methodology (RSM) and central composite design (CCD) to determine the effects of three operating parameters (H2O2 dosage, H2O2/Fe2+ molar ratio, and irradiation time) on disintegration and dewaterability of WAS. MLVSS removal, capillary suction time (CST) reduction, sCOD, and EPS were obtained as 70%, 25%, 12,000 mg/L, and 500 mg/L, respectively, at the optimal conditions, i.e., 725 g H2O2/kg TS, H2O2/Fe2+ molar ratio 80, and irradiation time 40 min. Two batch-fed completely mixed mesophilic anaerobic digesters were then operated at 15-day solid retention time (SRT) and 37 ± 0.5 °C to compare the digestibility of untreated and photo-Fenton pretreated sludge in terms of volatile solids (VS) reduction, COD removal, and biogas production at steady-state operations. Photo-Fenton pretreatment followed by anaerobic digestion of WAS was very effective and yielded 75.7% total VS reduction, 81.5% COD removal, and 0.29-0.31 m3/kg VSfed·d biogas production rate, compared to 40.7% total VS solid reduction, 54.7% COD removal, and 0.12-0.17 m3/kg VSfed·d biogas production rate for control. Thus, photo-Fenton can be a useful pretreatment step in sludge management.
    Matched MeSH terms: Biofuels/analysis
  4. Zhu J, Cai Y, Wakisaka M, Yang Z, Yin Y, Fang W, et al.
    Sci Total Environ, 2023 Oct 20;896:165200.
    PMID: 37400020 DOI: 10.1016/j.scitotenv.2023.165200
    Microalgae have been recognized as emerging cell factories due to the high value-added bio-products. However, the balance between algal growth and the accumulation of metabolites is always the main contradiction in algal biomass production. Hence, the security and effectiveness of regulating microalgal growth and metabolism simultaneously have drawn substantial attention. Since the correspondence between microalgal growth and reactive oxygen species (ROS) level has been confirmed, improving its growth under oxidative stress and promoting biomass accumulation under non-oxidative stress by exogenous mitigators is feasible. This paper first introduced ROS generation in microalgae and described the effects of different abiotic stresses on the physiological and biochemical status of microalgae from these aspects associated with growth, cell morphology and structure, and antioxidant system. Secondly, the role of exogenous mitigators with different mechanisms in alleviating abiotic stress was concluded. Finally, the possibility of exogenous antioxidants regulating microalgal growth and improving the accumulation of specific products under non-stress conditions was discussed.
    Matched MeSH terms: Biofuels
  5. Balan WS, Janaun J, Chung CH, Semilin V, Zhu Z, Haywood SK, et al.
    J Hazard Mater, 2021 02 15;404(Pt B):124092.
    PMID: 33091694 DOI: 10.1016/j.jhazmat.2020.124092
    In this study, carbon-silica based acid catalysts derived from rice husks (RH) were successfully synthesised using microwave (MW) technology. The results showed that MW sulphonation produced Sulphur (S) content of 17.2-18.5 times higher than in raw RH. Fourier-transform Infrared Spectroscopy (FTIR) showed peak at 1035 cm-1 which corresponded to O˭S˭O stretching of sulphonic (-SO3H) group. XRD showed sulfonated RH catalysts (SRHCs) have amorphous structure, and through SEM, broadening of the RH voids and also formation of pores is observed. RH600 had the highest surface area of 14.52 m2/g. SRHCs showed high catalytic activity for esterification of oleic acid with methanol with RH600 had the highest initial formation rate (6.33 mmolL-1min-1) and yield (97%). The reusability of the catalyst showed gradually dropped yield of product for every recycle, which might be due to leaching of -SO3H. Finally, esterification of oil recovered from palm oil mill effluent (POME) with methanol achieved a conversion of 87.3% free fatty acids (FFA) into fatty acid methyl esters (FAME).
    Matched MeSH terms: Biofuels
  6. Nazarpour F, Abdullah DK, Abdullah N, Motedayen N, Zamiri R
    Biomed Res Int, 2013;2013:268349.
    PMID: 24167813 DOI: 10.1155/2013/268349
    Rubberwood (Hevea brasiliensis), a potential raw material for bioethanol production due to its high cellulose content, was used as a novel feedstock for enzymatic hydrolysis and bioethanol production using biological pretreatment. To improve ethanol production, rubberwood was pretreated with white rot fungus Ceriporiopsis subvermispora to increase fermentation efficiency. The effects of particle size of rubberwood (1 mm, 0.5 mm, and 0.25 mm) and pretreatment time on the biological pretreatment were first determined by chemical analysis and X-ray diffraction and their best condition obtained with 1 mm particle size and 90 days pretreatment. Further morphological study on rubberwood with 1 mm particle size pretreated by fungus was performed by FT-IR spectra analysis and SEM observation and the result indicated the ability of this fungus for pretreatment. A study on enzymatic hydrolysis resulted in an increased sugar yield of 27.67% as compared with untreated rubberwood (2.88%). The maximum ethanol concentration and yield were 17.9 g/L and 53% yield, respectively, after 120 hours. The results obtained demonstrate that rubberwood pretreated by C. subvermispora can be used as an alternative material for the enzymatic hydrolysis and bioethanol production.
    Matched MeSH terms: Biofuels/microbiology*
  7. Nur Nazlina Saimon, Heng Khuan Eu, Anwar Johari, Norzita Ngadi, Mazura Jusoh, Zaki Yamani Zakaria
    Sains Malaysiana, 2018;47:109-115.
    Biodiesel, one of the renewable energy sources has gained attention for decades as the alternative fuel due to its remarkable properties. However, there are several drawbacks from the industrial production of biodiesel such as the spike in the production cost, environmental issues related to the usage of homogeneous catalyst and profitability in long term. One of the solutions to eliminate the problem is by utilizing low cost starting material such as palm fatty acid distillate (PFAD). PFAD is a byproduct from the refining of crude palm oil and abundantly available. Esterification of PFAD to biodiesel will be much easier with the presence of heterogeneous acid catalyst. Most of acid catalyst preparation involves series of heating process using conventional method. In this study, microwave was utilized in catalyst preparation, significantly reducing the reaction time from conventional heating method. The catalyst produced was characterized using X-Ray Diffraction (XRD), Brunauer Emmet and Teller (BET), Scanning Electron Microscopy (SEM), Temperature-Programmed Desorption - Ammonia (TPD-NH3) and Fourier Transform Infrared (FTIR) while percentage yield and conversion of the PFAD were analysed by gas chromatography - flame ionization detector (GC-FID) and acid-base titration, respectively. It has been demonstrated that the percentage yield of biodiesel from the PFAD by employing sulfonated glucose acid catalyst (SGAC) reached 98.23% under the following conditions: molar ratio of methanol to PFAD of 10:1, catalyst loading of 2.5% and reaction temperature of 70oC. The microwave-assisted SGAC showed its potential to replace the SGAC produced via conventional heating method.
    Matched MeSH terms: Biofuels
  8. Sadrolhosseini AR, Moksin MM, Nang HL, Norozi M, Yunus WM, Zakaria A
    Int J Mol Sci, 2011;12(4):2100-11.
    PMID: 21731429 DOI: 10.3390/ijms12042100
    In this study, optical and thermal properties of normal grade and winter grade palm oil biodiesel were investigated. Surface Plasmon Resonance and Photopyroelectric technique were used to evaluate the samples. The dispersion curve and thermal diffusivity were obtained. Consequently, the variation of refractive index, as a function of wavelength in normal grade biodiesel is faster than winter grade palm oil biodiesel, and the thermal diffusivity of winter grade biodiesel is higher than the thermal diffusivity of normal grade biodiesel. This is attributed to the higher palmitic acid C(16:0) content in normal grade than in winter grade palm oil biodiesel.
    Matched MeSH terms: Biofuels/analysis*
  9. Mohd. Sanusi Che Kadir, Jamaliah Md. Jahim, Nurina Anuar, Mohd. Sobri Takrif, Zahira Yaakub
    MyJurnal
    In this study, an anaerobic mesophilic bacterial strain, namely Clostridium butyricum KBH1, was isolated from a natural source. This strain grew well and produced biogas with an average hydrogen concentration of 60% (v/v) in the Reinforced Clostridial Media (RCM). To study the basic nutrient requirements, three main nutrients namely peptone (Pep), yeast extracts (Yes) and glucose (Glu) were chosen as factors, using an experimental design. The experiments were run according to 23 Full Factorial Design, followed by the Response Surface Method (RSM). The fermentation was performed in 30 ml serum bottles with 20 ml working volume in a sterile and anaerobic condition at 37°C with 5% inoculums. The results from the Analysis of Variance (ANOVA) for the factorial design showed that all the three factors had significantly affected the gas production by the C. butyricum. The response surface plot of the gas production by C. butyricum showed that the gas production could be enhanced by increasing peptone and yeast extract concentrations up to 15 g/l and 24 g/l respectively, without showing any substrate inhibition. Meanwhile, the glucose concentration showed an optimum at the middle point (8 g/l) with possible substrate inhibition at a high concentration (12 g/l). The total biogas production could be correlated to the three factors, using the quadratic equation: Gas =0.17 + 7.11Glu - 0.02Pep + 0.77Yes - 0.53Glu2 + 0.09Glu*Pep. The experimental results showed that the strain could grow well in substrate with high organic nitrogen content such as POME and might be not suitable for substrate with high sugar content due to substrate inhibition.
    Matched MeSH terms: Biofuels
  10. Nurul Hidayah Che Mat, Md Atiqur Rahman Bhuiyan, Senan S, Ratnam W, Zahira Yaakob
    Sains Malaysiana, 2015;44:1567-1572.
    Phenotypic selection of individuals is the first step in a selective breeding program for elite hybrid seed production. In
    this study, a total of 295 Jatropha curcas individuals raised from cuttings representing 21 accessions, collected from eight
    different countries were evaluated for growth performance. The evaluation was done at the Biodiesel Research Station
    of Universiti Kebangsaan Malaysia, Kuala Pilah from December 2012 to December 2013. Individual plants from each
    accession were observed on several agronomic and yield related traits and all the data were recorded periodically.
    Performance of each accession was analyzed using Statistical Analysis System (SAS) 9.4. Four traits which were plant
    height (PH), number of flowers per inflorescence (NFI), number of female flowers per inflorescence (NFFPI) and hundred
    seed weight (HSW) showed significant differences among the accessions after one year of planting. Maximum values for
    each trait were 115.5 cm for PH, 6 for number of branches per plant (BPP), 9 for number of inflorescences per plant
    (NIPP), 25 for number of fruits per plant (NFPP), 5 for number of fruits per inflorescence (NFPI), 191 for NFI, 10 for
    NFFPI, 81.0 g for HSW and 70 for number of seeds per plant (NSPP). Accession number 1 from Thailand showed the best
    performance for most traits. A highly significant and positive correlation was found between NFPP and NSPP. Based on
    superior trait values for NIPP, NFPP, NFPI, NFI, NFFPI and HSW, five plants from accession UKMJC 01, 04, 05, 13 and 14
    have been selected for generating elite intraspecific hybrids.
    Matched MeSH terms: Biofuels
  11. Atnaw SM, Sulaiman SA, Yusup S
    ScientificWorldJournal, 2014;2014:121908.
    PMID: 24578617 DOI: 10.1155/2014/121908
    Biomass wastes produced from oil palm mills and plantations include empty fruit bunches (EFBs), shells, fibers, trunks, and oil palm fronds (OPF). EFBs and shells are partially utilized as boiler fuel while the rest of the biomass materials like OPF have not been utilized for energy generation. No previous study has been reported on gasification of oil palm fronds (OPF) biomass for the production of fuel gas. In this paper, the effect of moisture content of fuel and reactor temperature on downdraft gasification of OPF was experimentally investigated using a lab scale gasifier of capacity 50 kW. In addition, results obtained from equilibrium model of gasification that was developed for facilitating the prediction of syngas composition are compared with experimental data. Comparison of simulation results for predicting calorific value of syngas with the experimental results showed a satisfactory agreement with a mean error of 0.1 MJ/Nm³. For a biomass moisture content of 29%, the resulting calorific value for the syngas was found to be only 2.63 MJ/Nm³, as compared to nearly double (4.95 MJ/Nm³) for biomass moisture content of 22%. A calorific value as high as 5.57 MJ/Nm³ was recorded for higher oxidation zone temperature values.
    Matched MeSH terms: Biofuels*
  12. Shuit SH, Lee KT, Kamaruddin AH, Yusup S
    Environ Sci Technol, 2010 Jun 1;44(11):4361-7.
    PMID: 20455588 DOI: 10.1021/es902608v
    Biodiesel from Jatropha curcas L. seed is conventionally produced via a two-step method: extraction of oil and subsequent esterification/transesterification to fatty acid methyl esters (FAME), commonly known as biodiesel. Contrarily, in this study, a single step in situ extraction, esterification and transesterification (collectively known as reactive extraction) of J. curcas L. seed to biodiesel, was investigated and optimized. Design of experiments (DOE) was used to study the effect of various process parameters on the yield of FAME. The process parameters studied include reaction temperature (30-60 degrees C), methanol to seed ratio (5-20 mL/g), catalyst loading (5-30 wt %), and reaction time (1-24 h). The optimum reaction condition was then obtained by using response surface methodology (RSM) coupled with central composite design (CCD). Results showed that an optimum biodiesel yield of 98.1% can be obtained under the following reaction conditions: reaction temperature of 60 degrees C, methanol to seed ratio of 10.5 mL/g, 21.8 wt % of H(2)SO(4), and reaction period of 10 h.
    Matched MeSH terms: Biofuels*
  13. Adam IK, Heikal M, Aziz ARA, Yusup S
    Environ Sci Pollut Res Int, 2018 Oct;25(28):28500-28516.
    PMID: 30088249 DOI: 10.1007/s11356-018-2863-8
    The present work analyzes the effect of antioxidants on engine combustion performance of a multi-cylinder diesel engine fueled with PB30 and PB50 (30 and 50 vol.% palm biodiesel (PB)). Four antioxidants namely N,N'-diphenyl-1,4-phenylenediamine (DPPD), N-phenyl-1,4-phenylenediamine (NPPD), 2(3)-tert-Butyl-4-methoxyphenol (BHA), and 2-tert-butylbenzene-1,4-diol (TBHQ) were added at concentrations of 1000 and 2000 ppm to PB30 and PB50. TBHQ showed the highest activity in increasing oxidation stability in both PB30 and PB50 followed by BHA, DPPD, and NPPD respectively, without any negative effect on physical properties. Compared to diesel fuel, PB blends showed 4.61-6.45% lower brake power (BP), 5.90-8.69% higher brake specific fuel consumption (BSFC), 9.64-11.43% higher maximum in cylinder pressure, and 7.76-12.51% higher NO emissions. Carbon monoxide (CO), hydrocarbon (HC), and smoke opacity were reduced by 36.78-43.56%, 44.12-58.21%, and 42.59-63.94%, respectively, than diesel fuel. The start of combustion angles (SOC) of PB blends was - 13.2 to - 15.6 °CA BTDC, but the combustion delays were 5.4-7.8 °CA short compared to diesel fuel which were - 10 °CA BTDC and 11°CA respectively. Antioxidant fuels of PB showed higher BP (1.81-5.32%), CO (8.41-24.60%), and HC (13.51-37.35%) with lower BSFC (1.67-7.68%), NO (4.32-11.53%), maximum in cylinder pressure (2.33-4.91%) and peak heat release rates (HRR) (3.25-11.41%) than baseline fuel of PB. Similar SOC of - 13 to - 14 °CA BTDC was observed for PB blended fuels and antioxidants. It can be concluded that antioxidants' addition is effective in increasing the oxidation stability and in controlling the NOx emissions of palm biodiesel fuelled diesel engine.
    Matched MeSH terms: Biofuels/analysis*
  14. Al-Shorgani NK, Kalil MS, Yusoff WM
    Bioprocess Biosyst Eng, 2012 Jun;35(5):817-26.
    PMID: 22147105 DOI: 10.1007/s00449-011-0664-2
    Rice bran (RB) and de-oiled rice bran (DRB) have been treated and used as the carbon source in acetone-butanol-ethanol (ABE) production using Clostridium saccharoperbutylacetonicum N1-4. The results showed that pretreated DRB produced more ABE than pretreated RB. Dilute sulfuric acid was the most suitable treatment method among the various pretreatment methods that were applied. The highest ABE obtained was 12.13 g/L, including 7.72 g/L of biobutanol, from sulfuric acid. The enzymatic hydrolysate of DRB (ESADRB), when treated with XAD-4 resin, resulted in an ABE productivity and yield of 0.1 g/L h and 0.44 g/g, respectively. The results also showed that the choice of pretreatment method for RB and DRB is an important factor in butanol production.
    Matched MeSH terms: Biofuels*
  15. Hoo PY, Hashim H, Ho WS, Yunus NA
    J Environ Manage, 2019 Jul 01;241:603-611.
    PMID: 30616893 DOI: 10.1016/j.jenvman.2018.11.092
    Energy is widely used in industry for heating and cooling, with natural gas (NG) being the largest primary energy source in Malaysia, closely followed by coal. Renewable energy, such as biogas upgrading to biomethane, could cut the use of fossil fuels by supplementing NG usage due to their similar physicochemical and thermochemical characteristics. Biogas production plants in Malaysia are more commonly seen in waste-to-energy scenarios, with the technology anaerobic digestion, and their deployment is supported via feed-in tariffs (FiT) for power generation. Other potential applications such as the conversion of biogas into biomethane, injection into the natural gas grid or transportation through a virtual pipeline may still need further technical development. This paper presents spatial techno economic optimisation modelling using BeWhere to determine decentralised biomethane production plants using feedstock from multiple sources of biogas, including palm oil mill effluent (POME), food waste, cattle manure and chicken manure. This model considered potential configurations and sizes of the biomethane plants, the transportation of biomethane using a virtual pipeline (at 250 psig) and demand in one of the states in Malaysia, namely Johor. It was found that two to four biomethane plants with capacities ranging between 125 and 700 m3/h were located in densely populated areas or heavier industrial consumers when the carbon tax was implemented at 167.71 EUR/tCO2 (800 MYR/tCO2). Sensitivity analysis suggested that biomethane production increases with the increasing country renewable energy share target to beyond 2080 MW. It is recommended that specific policy regulations and Feed-in Tariff (FiT) mechanisms are used to expand the biomethane market share in the country.
    Matched MeSH terms: Biofuels*
  16. Ahmad Farid MA, Hassan MA, Roslan AM, Ariffin H, Norrrahim MNF, Othman MR, et al.
    Environ Sci Pollut Res Int, 2021 Jun;28(22):27976-27987.
    PMID: 33527241 DOI: 10.1007/s11356-021-12585-7
    This study provides insight into the decolorization strategy for crude glycerol obtained from biodiesel production using waste cooking oil as raw material. A sequential procedure that includes physico-chemical treatment and adsorption using activated carbon from oil palm biomass was investigated. The results evidenced decolorization and enrichment of glycerol go hand in hand during the treatment, achieving >89% color removal and > 98% increase in glycerol content, turning the glycerol into a clear (colorless) solution. This is attributed to the complete removal of methanol, free fatty acids, and triglycerides, as well as 85% removal of water, and 93% removal of potassium. Properties of the resultant glycerol met the quality standard of BS 2621:1979. The economic aspects of the proposed methods are examined to fully construct a predesign budgetary estimation according to chemical engineering principles. The starting capital is proportionate to the number of physical assets to acquire where both entail a considerable cost at USD 13,200. Having the benefit of sizeable scale production, it reasonably reduces the operating cost per unit product. As productivity sets at 33 m3 per annum, the annual operating costs amount to USD 79,902 in glycerol decolorization. This is translatable to USD 5.38 per liter glycerol, which is ~69% lower compared to using commercial activated carbon.
    Matched MeSH terms: Biofuels
  17. Choong YY, Norli I, Abdullah AZ, Yhaya MF
    Bioresour Technol, 2016 Jun;209:369-79.
    PMID: 27005788 DOI: 10.1016/j.biortech.2016.03.028
    This paper critically reviews the impacts of supplementing trace elements on the anaerobic digestion performance. The in-depth knowledge of trace elements as micronutrients and metalloenzyme components justifies trace element supplementation into the anaerobic digestion system. Most of the earlier studies reported that trace elements addition at (sub)optimum dosages had positive impacts mainly longer term on digester stability with greater organic matter degradation, low volatile fatty acids (VFA) concentration and higher biogas production. However, these positive impacts and element requirements are not fully understood, they are explained on a case to case basis because of the great variance of the anaerobic digestion operation. Iron (Fe), nickel (Ni) and cobalt (Co) are the most studied and desirable elements. The right combination of multi-elements supplementation can have greater positive impact. This measure is highly recommended, especially for the mono-digestion of micronutrient-deficient substrates. The future research should consider the aspect of trace element bioavailability.
    Matched MeSH terms: Biofuels
  18. Yee W
    World J Microbiol Biotechnol, 2016 Apr;32(4):64.
    PMID: 26931604 DOI: 10.1007/s11274-016-2023-6
    Over the years, microalgae have been identified to be a potential source of commercially important products such as pigments, polysaccharides, polyunsaturated fatty acids and in particular, biofuels. Current demands for sustainable fuel sources and bioproducts has led to an extensive search for promising strains of microalgae for large scale cultivation. Prospective strains identified for these purposes were among others, mainly from the genera Hematococcus, Dunaliella, Botryococcus, Chlorella, Scenedesmus and Nannochloropsis. Recently, microalgae from the Selenastraceae emerged as potential candidates for biodiesel production. Strains from the Selenastraceae such as Monoraphidium sp. FXY-10, M. contortum SAG 47.80, Ankistrodesmus sp. SP2-15 and M. minutum were high biomass and lipid producers when cultivated under optimal conditions. A number of Selenastraceae strains were also reported to be suitable for cultivation in wastewater. This review highlights recent reports on potential strains from the Selenastraceae for biodiesel production and contrasts their biomass productivity, lipid productivity as well as fatty acid profile. Cultivation strategies employed to enhance their biomass and lipid productivity as well as to reduce feedstock cost are also discussed in this paper.
    Matched MeSH terms: Biofuels*
  19. Khalid NA, Rajandas H, Parimannan S, Croft LJ, Loke S, Chong CS, et al.
    3 Biotech, 2019 Oct;9(10):364.
    PMID: 31588388 DOI: 10.1007/s13205-019-1892-4
    Empty fruit bunch (EFB) and palm oil mill effluent (POME) are the major wastes generated by the oil palm industry in Malaysia. The practice of EFB and POME digester sludge co-composting has shown positive results, both in mitigating otherwise environmentally damaging waste streams and producing a useful product (compost) from these streams. In this study, the bacterial ecosystems of 12-week-old EFB-POME co-compost and POME biogas sludge from Felda Maokil, Johor were analysed using 16S metagenome sequencing. Over ten phyla were detected, with Chloroflexi being the predominant phylum, representing approximately 53% of compost and 23% of the POME microbiome reads. The main bacterial lineage found in the compost and POME was Anaerolinaceae (Chloroflexi) with 30% and 18% of the total gene fragments, respectively. The significant differences between compost and POME communities were abundances of Syntrophobacter, Sulfuricurvum and Coprococcus. No methanogens were identified due to the bias in general 16S primers to eubacteria. The preponderance of anaerobic species in the compost and high abundance of secondary metabolite fermenting bacteria is due to an extended composting time, with anaerobic collapse of the pile due to the tropical heat. Predictive functional profiles of the metagenomes using 16S rRNA marker genes suggest that the presence of enzymes involved in degradation of polysaccharides such as glucoamylase, endoglucanase and arabinofuranosidase, all of which were strongly active in POME. Eubacterial species associated with cellulytic methanogenesis were present in both samples.
    Matched MeSH terms: Biofuels
  20. Kamar Zaman AM, Yaacob JS
    Environ Sci Pollut Res Int, 2022 Feb;29(9):12948-12964.
    PMID: 35034296 DOI: 10.1007/s11356-021-18006-z
    Consumption of natural resources and waste generation continues to rise as the human population increases. Ever since the industrial revolution, consumers have been adopting a linear economy model based on the 'take-make-dispose' approach. Raw materials are extracted to be converted into products and finally discarded as wastes. Consequently, this practice is unsustainable because it causes a massive increase in waste production. The root problems of the linear system can be addressed by transitioning to a circular economy. Circular economy is an economic model in which wastes from one product are recycled and used as resources for other processes. This literature review discovers the potential of vermicompost as a sustainable strategy in circular economy and highlights the benefits of vermicompost in ensuring food security, particularly in improving agricultural yield and quality, as well as boosting crop's nutritional quality. Vermicompost has the potential to be used in a variety of ways in the circular economy, including for agricultural sustainability, managing waste, pollutant remediation, biogas production and animal feed production. The recycling of organic wastes to produce vermicompost can benefit both the consumers and environment, thus paving the way towards a more sustainable agriculture for the future.
    Matched MeSH terms: Biofuels
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links