Displaying publications 1 - 20 of 143 in total

Abstract:
Sort:
  1. Águila-Almanza E, Hernández-Cocoletzi H, Rubio-Rosas E, Calleja-González M, Lim HR, Khoo KS, et al.
    Chemosphere, 2022 Feb;288(Pt 2):132550.
    PMID: 34656622 DOI: 10.1016/j.chemosphere.2021.132550
    The final disposal of waste generated by human activities has been turned into a great challenge; until now, little attention has been paid to organic waste, particularly from the restaurant sector. This work describes the process of obtaining calcium carbonate contained in oyster and clam shells re-collected in seafood restaurants. The IR absorption spectra of all the samples revealed the presence of characteristic bands of the carbonate group located at 872, 712 and 1414 cm-1; the peak at 1081 cm-1 of the clamshells confirms the presence of the aragonite phase. The SEM images allow observing a granular morphology whose agglomerates having a size within the range of 0.5-15 μm in brown shells, and a lower dispersion prevails in the grey species and oyster shells that go from 0.3 to 5.9 μm. All of the shells were found to be composed of carbon (C), oxygen (O2) and calcium (Ca) in different concentrations. The calcium carbonate obtained from clamshells has an orthorhombic crystalline structure, while the oyster carbonate has a rhombohedral structure as the calcium carbonate used in the construction industry; the morphology particles also coincide with each other. The material obtained combined with a mixture composed of resin, cellulose, and granules were used to prepare a paste, which was used as a residential finish.
    Matched MeSH terms: Calcium Carbonate*
  2. Zwain HM, Chang SM, Dahlan I
    Prep Biochem Biotechnol, 2019;49(4):344-351.
    PMID: 30712465 DOI: 10.1080/10826068.2019.1566144
    Microbial content formed in bioreactors plays a significant role in the anaerobic process. Therefore, the physicochemical characteristics of microbial content in a modified anaerobic inclining-baffled reactor (MAI-BR) treating recycled paper mill effluent (RPME) were investigated using Fourier transform infrared (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), thermogravimetric (TG), and derivative thermogravimetric (DTG) analyses, scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS), Brunauer-Emmett-Teller (BET), and surface area analyzer. FTIR spectra revealed that the microbial content had stronger characteristic peaks corresponding to alcohols, water, lipids carbohydrates, proteins, and mineral compounds. Calcite, muscovite, and lepidolite were the prevalent mineral phases found by XRD analysis. The elemental of these minerals like C, Ca, N, O, and Si was confirmed by XPS results. The microbial content samples from each compartment showed similar thermal behavior. SEM images showed that straight rod-shaped and Methanosaeta-like microorganisms were predominant, whereas C, O, and Ca were noticed by EDS on the surface of granules. The BET surface areas and pores of granules are found to decline throughout the reactor's compartment, where Compartment 1 had the largest values. Thus, the findings of this study establish further understanding of the physicochemical properties of microbial content formed in MAI-BR during the RPME treatment.
    Matched MeSH terms: Calcium Carbonate
  3. Yule CM, Lim YY, Lim TY
    Carbon Balance Manag, 2018 Feb 07;13(1):3.
    PMID: 29417248 DOI: 10.1186/s13021-018-0092-6
    BACKGROUND: Tropical peat swamp forests (TPSF) are globally significant carbon stores, sequestering carbon mainly as phenolic polymers and phenolic compounds (particularly as lignin and its derivatives) in peat layers, in plants, and in the acidic blackwaters. Previous studies show that TPSF plants have particularly high levels of phenolic compounds which inhibit the decomposition of organic matter and thus promote peat accumulation. The studies of phenolic compounds are thus crucial to further understand how TPSF function with respect to carbon sequestration. Here we present a study of cycling of phenolic compounds in five forests in Borneo differing in flooding and acidity, leaching of phenolic compounds from senescent Macaranga pruinosa leaves, and absorption of phenolics by M. pruinosa seedlings.

    RESULTS: The results of the study show that total phenolic content (TPC) in soil and leaves of three species of Macaranga were highest in TPSF followed by freshwater swamp forest and flooded limestone forest, then dry land sites. Highest TPC values were associated with acidity (in TPSF) and waterlogging (in flooded forests). Moreover, phenolic compounds are rapidly leached from fallen senescent leaves, and could be reabsorbed by tree roots and converted into more complex phenolics within the leaves.

    CONCLUSIONS: Extreme conditions-waterlogging and acidity-may facilitate uptake and synthesis of protective phenolic compounds which are essential for impeded decomposition of organic matter in TPSF. Conversely, the ongoing drainage and degradation of TPSF, particularly for conversion to oil palm plantations, reverses the conditions necessary for peat accretion and carbon sequestration.

    Matched MeSH terms: Calcium Carbonate
  4. Yuejun He, Changhong Jiang, Hao Yang, Yongjian Wang, Zhangcheng Zhong
    Sains Malaysiana, 2017;46:1701-1708.
    How the composition of the arbuscular mycorrhizal (AM) fungal community affects plant traits of different plant species in karst environments is poorly understood. Broussonetia papyrifera (a woody shrub) and Bidens pilosa (a herbaceous plant) growing in pots in limestone soil were inoculated with an AM fungus, either Funneliformis mosseae (FM), Diversispora versiformis (DV) or Glomus diaphanum (GD) or with an inoculum mixture of all three AM fungi (bn). B. papyrifera and B. pilosa seedlings inoculated with AM fungi showed a significant increase in biomass and nitrogen and phosphorus acquisition compared with the controls, which lacked mycorrhiza. Mixed fungal inoculations significantly enhanced biomass and nitrogen and phosphorus acquisition by B. papyrifera seedlings compared with single fungal inoculations. Nitrogen and phosphorus acquisition by B. papyrifera mycorrhizal seedlings was significantly greater than that of B. pilosa mycorrhizal seedlings. Fungal composition significantly influenced the mycorrhizal benefits of biomass and phosphorus acquisition and mixed fungal inoculations enhanced nitrogen acquisition. Plant species significantly affected nitrogen acquisition but did not have an effect on biomass and phosphorus benefits. We concluded that AM fungal associations increased plant growth and nutrient absorption and that in general a mixed inoculation of AM fungi enhanced biomass and nutrient acquisition more than a single AM fungal inoculation. In addition, a mycorrhizal association was more beneficial for B. papyrifera seedlings in terms of biomass and nutrient acquisition than for B. pilosa seedlings.
    Matched MeSH terms: Calcium Carbonate
  5. Yeong, Meng How, Shah Rizal Kasim, Hazizan Md Akil, Zainal Arifin Ahmad
    MyJurnal
    β-tricalcium phosphate (β-TCP) powders were synthesized by using various particles sizes (40 nm – 780 μm) calcium carbonate (CaCO3) and phosphoric acid (H3PO4) at room temperature (25 ˚C). The synthesized powders were characterized by using X-Ray Diffraction (XRD) method. The purity of β-TCP powders were determined from XRD pattern while the crystallite size of β-TCP powders were calculated by using Scherrer equation. Results shows that the purity of β-TCP powders were ranged from 20.33 % to 81.94 % while the crystallite size of β- TCP powders were ranged from 0.04391 μm to 0.06751 μm. From this work, particle size of CaCO3 will influenced the purity but not the mean crystallite size of synthesized β-TCP.
    Matched MeSH terms: Calcium Carbonate
  6. Yeap SS, Fauzi AR, Kong NC, Halim AG, Soehardy Z, Rahimah I, et al.
    J Rheumatol, 2008 Dec;35(12):2344-7.
    PMID: 19004038 DOI: 10.3899/jrheum.080634
    OBJECTIVE: To assess bone mineral density (BMD) changes in patients with systemic lupus erythematosus (SLE) undergoing longterm therapy with corticosteroids (CS) while taking calcium, calcitriol, or alendronate. The primary endpoint was BMD changes at 2 years.
    METHODS: Premenopausal SLE patients were randomized into 3 groups according to medication: calcium carbonate 500 mg bd (calcium alone), calcitriol 0.25 microg bd plus calcium carbonate 500 mg bd (calcitriol + calcium), and alendronate 70 mg/week plus calcium carbonate 500 mg bd (alendronate + calcium). BMD was measured at baseline and at the end of the first and second years.
    RESULTS: Ninety-eight patients were recruited. There were 33 patients taking calcium alone, 33 calcitriol + calcium, and 32 alendronate + calcium. On randomization, median duration of CS use was 2.5 years (range 0-20 yrs). Seventy-seven patients (78.6%) completed the study (23 taking calcium alone, 27 calcitriol + calcium, 27 alendronate + calcium). There were no significant differences in mean CS dosages among the 3 groups at the time of BMD measurements. After 2 years, there were no significant changes in BMD in the calcium-alone and calcitriol + calcium groups, apart from a 0.93% (p < 0.001) reduction in total hip BMD in the calcium-alone group. In contrast, the alendronate + calcium group showed significant increases in BMD of 2.69% (p < 0.001) in the lumbar spine and 1.41% (p < 0.001) in total hip.
    CONCLUSION: Both calcium alone and calcitriol + calcium preserved lumbar spine BMD in premenopausal patients with SLE taking longterm CS at 2 years, whereas alendronate + calcium led to increases in BMD in lumbar spine and total hip. Premenopausal women taking CS should be considered for osteoporosis prophylaxis.
    Study site: Outpatient clinics in 2 teaching hospitals in Kuala Lumpur, Malaysia
    Matched MeSH terms: Calcium Carbonate/therapeutic use*
  7. WAN ZAWIAH WAN ABDULLAH, MD ZAIDI YAHAYA, MOHAMAD YUSOF MASKAT
    Sains Malaysiana, 2012;41:411-418.
    Kajian ini dijalankan bagi menentukan kesan penambahan kalsium karbonat (CaCO3) dan sukrosa ke atas ekstrak roselle dengan menggunakan Kaedah Respon Permukaan. Sebanyak 21 perlakuan digunakan berdasarkan reka bentuk eksperimen Central Composite Rotatable Design (CCRD). Penentuan nilai pH dan Briks telah dijalankan. Bagi nilai pH, model yang didapati adalah 4.03+0.39x1-8.20x2-0.05x1 2-4.16x2 2-0.02x1x2 dengan nilai x1 adalah kalsium karbonat dan nilai x2 adalah sukrosa. Nilai positif pada kepekatan kalsium menunjukkan penambahan kalsium meningkatkan nilai pH ekstrak roselle. Model untuk Briks adalah 8.91 + 0.23x1 + 2.20x2. Nilai positif pada kepekatan kalsium dan sukrosa menunjukkan penambahan kalsium dan sukrosa meningkatkan nilai Briks ekstrak roselle. Penilaian sensori dengan menggunakan panel terlatih (n=8) menunjukkan penambahan sukrosa meningkatkan penerimaan keseluruhan terhadap ekstrak Roselle. Manakala, kesan penambahan kalsium karbonat telah mengurangkan penerimaan keseluruhan kerana ia merendahkan rasa masam.
    Matched MeSH terms: Calcium Carbonate
  8. Vinuthinee N, Azreen-Redzal A, Juanarita J, Zunaina E
    Int Med Case Rep J, 2015;8:47-50.
    PMID: 25709507 DOI: 10.2147/IMCRJ.S75198
    We report a rare case of sling shot injury that presented with a gunshot-like wound with preseptal cellulitis, in a toddler. An 11-month-old Malay child presented with a gunshot-like wound over the forehead following sling shot injury. On examination, he had a deep circular laceration wound over the forehead, measuring 2.0 cm in diameter, with minimal bleeding. There was no obvious foreign body seen inside the wound and no palpable foreign body surrounding the wound. The gunshot-like wound was associated with left preseptal cellulitis. A skull X-ray showed a white opaque foreign body in the left frontal bone. Computed tomography (CT) scan of orbit and brain revealed a left comminuted fracture of the left orbital roof, and left frontal brain contusion with prelesional edema. Wound exploration was performed and revealed a 0.5 cm unshattered marble embedded in the left frontal bone. The marble and bone fragments were removed. The left preseptal cellulitis responded well to intravenous antibiotic and topical antibiotic.
    Matched MeSH terms: Calcium Carbonate
  9. Veksha A, Yin K, Moo JGS, Oh WD, Ahamed A, Chen WQ, et al.
    J Hazard Mater, 2020 04 05;387:121256.
    PMID: 31951979 DOI: 10.1016/j.jhazmat.2019.121256
    Flexible plastic packaging waste causes serious environmental issues due to challenges in recycling. This study investigated the conversion of flexible plastic packaging waste with 11.8 and 27.5 wt.% polyethylene terephthalate (PET) (denoted as PET-12 and PET-28, respectively) into oil and multi-walled carbon nanotubes (MWCNTs). The mixtures were initially pyrolyzed and the produced volatiles were processed over 9.0 wt.% Fe2O3 supported on ZSM-5 (400 °C) to remove oxygenated hydrocarbons (catalytic cracking of terephthalic and benzoic acids) that deteriorate oil quality. The contents of oxygenated hydrocarbons were decreased in oil from 4.6 and 9.4 wt.% per mass of PET-12 and PET-28, respectively, to undetectable levels. After catalytic cracking, the oil samples had similar contents of gasoline, diesel and heavy oil/wax fractions. The non-condensable gas was converted into MWCNTs over 0.9 wt.% Ni supported on CaCO3 (700 °C). The type of plastic packaging influenced the yields (2.4 and 1.5 wt.% per mass of PET-12 and PET-28, respectively) and the properties of MWCNTs due to the differences in gas composition. Regarding the electrocatalytic application, both MWCNTs from PET-12 and PET-28 outperformed commercial MWCNTs and Pt-based electrodes during oxygen evolution reaction, suggesting that MWCNTs from flexible plastic packaging can potentially replace conventional electrode materials.
    Matched MeSH terms: Calcium Carbonate
  10. Vakili AH, Selamat MR, Moayedi H
    ScientificWorldJournal, 2013;2013:547615.
    PMID: 23864828 DOI: 10.1155/2013/547615
    Use of dispersive clay as construction material requires treatment such as by chemical addition. Treatments to dispersive clay using pozzolan and Portland cement, singly and simultaneously, were carried out in this study. When used alone, the optimum amount of pozzolan required to treat a fully dispersive clay sample was 5%, but the curing time to reduce dispersion potential, from 100% to 30% or less, was 3 month long. On the other hand, also when used alone, a 3% cement content was capable of reducing dispersion potential to almost zero percent in only 7 days; and a 2% cement content was capable of achieving similar result in 14 days. However, treatment by cement alone is costly and could jeopardize the long term performance. Thus, a combined 5% pozzolan and 1.5% cement content was found capable of reducing dispersion potential from 100% to zero percent in 14 days. The results indicate that although simultaneous treatment with pozzolan and cement would extend the required curing time in comparison to treatment by cement alone of a higher content, the task could still be carried out in a reasonable period of curing time while avoiding the drawbacks of using either pozzolan or cement alone.
    Matched MeSH terms: Calcium Carbonate/chemistry*
  11. Ummul-Nazrah AR, Mohd Hairul MA, Kamin I, Kiew R, Ong PT
    PhytoKeys, 2018.
    PMID: 29780269 DOI: 10.3897/phytokeys.98.23903
    Vatica najibiana Ummul-Nazrah (Dipterocarpaceae), from the Relai Forest Reserve, Gua Musang, Kelantan and Gua Tanggang, Merapoh, Pahang, is described and illustrated. This species is Endangered and known from small populations restricted to two isolated karst limestone hills. The type locality, Relai Forest Reserve limestone, is currently under threat from encroaching oil palm plantations and ongoing logging, which, if it continues, will threaten the Kelantan population with extinction. The morphology of V. najibiana and the similar V. odorata subsp. odorata and V. harmandiana is compared.
    Matched MeSH terms: Calcium Carbonate
  12. Umar Hamzah, Abd. Rahim Samsudin
    Identification of a possible source of engineering geological hazard in the limestone area such as cavities, sinkholes and an underground cavern have become necessity for site investigation before any construction of roads, bridges and buildings are carried out. The study is also necessary for tunneling and underground mining works where knowledge of the engineering properties of the rock mass is very important in order to assess the suitability and safety of a proposed building. Geophysical techniques have been widely used in engineering geological study to deal with such problems that normally arise at construction sites with limestone bedrock. In this study, shallow seismic reflection technique and dipole-dipole geoelectrical methods were used to detect the presence of cavity in lime stone area of Batu Cave, Kuala Lumpur. The exact location and depth of cavities in the area were determined from the existing borehole data and report provided by the Geological Survey Department of Malaysia. Based on the borehole data, several cavities that were filled-up with water and fine silt are encountered at depths of 15.7m to 17.8m, 20.2m to 21.1m and 21.4m to 25.7m. Three shallow seismic reflection profiles were established on the cavity area and the results show that the cavities in the limestone occur in the form of 20 to 30m long subterranean channel of 15 to 30 m depth. Dipole-dipole resistivity survey conducted on seismic lines one and three also indicates the presence of the channel and cavities in the limestone.
    Pengecaman punca bencana geologi kejuruteraan di kawasan batu kapur seperti lohong batu kapur, kewujudan lubang benam dan gua-gua batu kapur telah menjadi amat penting dalam penyiasatan tapak sebelum sesuatu pembinaan seperti jalan raya, jambatan dan bangunan dilakukan. Begitu juga dalam kerja-kerja penerowongan dan perlombongan, pengetahuan asas sifat kejuruteraan jasad batuan amat perlu diketahui untuk menitai kesesuaian dan keselamatan bangunan yang bakal dibina. Teknik geofizik telah digunakan secara meluas dalam kajian geologi kejuruteraan untuk menangani masalah yang terdapat di tapak-tapak binaan yang mempunyai batu kapur sebagai batuan dasar. Dalam kajian ini teknik seismos pantulan cetek dan kaedah geoelektrik dwikutub-dwikutub telah digunakan untuk mengesan rongga batu kapur yang terdapat di kawasan Batu Caves, Kuala Lumpur. Kedudukan dan kedalaman rongga batu kapur di kawasan kajian telah ditentukan melalui data lubang gerudi dan laporan yang diperoleh daripada Jabatan Kajibumi Malaysia. Berdasarkan data lubang gerudi tersebut terdapat beberapa rongga yang terisi air dan pasir halus berlodak di kedalaman 15.7 m hingga 17.8 m, 20.2 m hingga 21.1 m dan 21.4 m hingga 25.7 m. Tiga profil seismos pantulan cetek telah dibuat di kawasan berongga tersebut dan hasil survei menunjukkan rongga dalam batu kapur tersebut membentuk palung sepanjang hampir 20 - 30 m pada kedalaman antara 15 m hingga 30 m. Rentisan survei geoelektrik dwikutub yang dilakukan pada profil seismos satu dan tiga juga memperlihatkan kehadiran lohong dan palung dalam batu kapur tersebut.
    Matched MeSH terms: Calcium Carbonate
  13. Tee ZK, Jahim JM, Tan JP, Kim BH
    Bioresour Technol, 2017 Jun;233:296-304.
    PMID: 28285221 DOI: 10.1016/j.biortech.2017.02.110
    Calcium carbonate was evaluated as a replacement for the base during the fermentation of glycerol by a highly productive strain of 1,3-propanediol (PDO), viz., Clostridium butyricum JKT37. Due to its high specific growth rate (µmax=0.53h(-1)), 40g/L of glycerol was completely converted into 19.6g/L of PDO in merely 7h of batch fermentation, leaving only acetate and butyrate as the by-products. The accumulation of these volatile fatty acids was circumvented with the addition of calcium carbonate as the pH neutraliser before the fermentation was inoculated. An optimal amount of 15g/L of calcium carbonate was statistically determined from screening with various glycerol concentrations (20-120g/L). By substituting potassium hydroxide with calcium carbonate as the pH neutraliser for fermentation in a bioreactor, a similar yield (YPDO/glycerol=0.6mol/mol) with a constant pH was achieved at the end of the fermentation.
    Matched MeSH terms: Calcium Carbonate
  14. Tan PY, Tey BT, Chan ES, Lai OM, Chang HW, Tan TB, et al.
    Foods, 2021 Feb 07;10(2).
    PMID: 33562391 DOI: 10.3390/foods10020358
    Calcium carbonate (CaCO3) has been utilized as a pH-responsive component in various products. In this present work, palm tocotrienols-rich fraction (TRF) was successfully entrapped in a self-assembled oil-in-water (O/W) emulsion system by using CaCO3 as the stabilizer. The emulsion droplet size, viscosity and tocotrienols entrapment efficiency (EE) were strongly affected by varying the processing (homogenization speed and time) and formulation (CaCO3 and TRF concentrations) parameters. Our findings indicated that the combination of 5000 rpm homogenization speed, 15 min homogenization time, 0.75% CaCO3 concentration and 2% TRF concentration resulted in a high EE of tocotrienols (92.59-99.16%) and small droplet size (18.83 ± 1.36 µm). The resulting emulsion system readily released the entrapped tocotrienols across the pH range tested (pH 1-9); with relatively the highest release observed at pH 3. The current study presents a potential pH-sensitive emulsion system for the entrapment and delivery of palm tocotrienols.
    Matched MeSH terms: Calcium Carbonate
  15. Tan K, Lu T, Ren MX
    PhytoKeys, 2020;157:7-26.
    PMID: 32934445 DOI: 10.3897/phytokeys.157.34032
    Based on an updated taxonomy of Gesneriaceae, the biogeography and evolution of the Asian Gesneriaceae are outlined and discussed. Most of the Asian Gesneriaceae belongs to Didymocarpoideae, except Titanotrichum was recently moved into Gesnerioideae. Most basal taxa of the Asian Gesneriaceae are found in the Indian subcontinent and Indo-China Peninsula, suggesting Didymocarpoideae might originate in these regions. Four species diversification centers were recognized, i.e. Sino-Vietnam regions, Malay Peninsula, North Borneo and Northwest Yunnan (Hengduan Mountains). The first three regions are dominated by limestone landscapes, while the Northwest Yunnan is well-known for its numerous deep gorges and high mountains. The places with at least 25% species are neoendemics (newly evolved and narrowly endemic) which were determined as evolutionary hotspots, including Hengduan Mountains, boundary areas of Yunnan-Guizhou-Guangxi in Southwest China, North Borneo, Pahang and Terengganu in Malay Peninsula, and mountainous areas in North Thailand, North Sulawesi Island. Finally, the underlying mechanisms for biogeographical patterns and species diversification of the Asian Gesneriaceae are discussed.
    Matched MeSH terms: Calcium Carbonate
  16. Tai YT, Foong CP, Najimudin N, Sudesh K
    J Biosci Bioeng, 2016 Apr;121(4):355-64.
    PMID: 26467694 DOI: 10.1016/j.jbiosc.2015.08.008
    PHA synthase (PhaC) is the key enzyme in the production of biodegradable plastics known as polyhydroxyalkanoate (PHA). Nevertheless, most of these enzymes are isolated from cultivable bacteria using traditional isolation method. Most of the microorganisms found in nature could not be successfully cultivated due to the lack of knowledge on their growth conditions. In this study, a culture-independent approach was applied. The presence of phaC genes in limestone soil was screened using primers targeting the class I and II PHA synthases. Based on the partial gene sequences, a total of 19 gene clusters have been identified and 7 clones were selected for full length amplification through genome walking. The complete phaC gene sequence of one of the clones (SC8) was obtained and it revealed 81% nucleotide identity to the PHA synthase gene of Chromobacterium violaceum ATCC 12472. This gene obtained from uncultured bacterium was successfully cloned and expressed in a Cupriavidus necator PHB(-)4 PHA-negative mutant resulting in the accumulation of significant amount of PHA. The PHA synthase activity of this transformant was 64 ± 12 U/g proteins. This paper presents a pioneering study on the discovery of phaC in a limestone area using metagenomic approach. Through this study, a new functional phaC was discovered from uncultured bacterium. Phylogenetic classification for all the phaCs isolated from this study has revealed that limestone hill harbors a great diversity of PhaCs with activities that have not yet been investigated.
    Matched MeSH terms: Calcium Carbonate
  17. Suzina AH, Azlina A, Shamsuria O, Samsudin AR
    Med J Malaysia, 2004 May;59 Suppl B:105-6.
    PMID: 15468840
    Mutagenicity of CORAGRAF (natural coral) and REKAGRAF (hydroxyapatite) was tested in Ames test with and without an external metabolic activation system (S9). The test revealed no mutagenic activity of both locally produced osseous substitutes.
    Matched MeSH terms: Calcium Carbonate/toxicity*
  18. Srisonchai R, Enghoff H, Likhitrakarn N, Panha S
    Zookeys, 2018.
    PMID: 30505161 DOI: 10.3897/zookeys.797.29510
    Nine new species constituting the 'spiny' group of dragon millipedes are assigned to the new genus Spinaxytes Srisonchai, Enghoff & Panha, gen. n. Seven new species are described from Thailand: S.biloba Srisonchai, Enghoff & Panha, sp. n. and S.palmata Srisonchai, Enghoff & Panha, sp. n. from Surat Thani Province, S.hasta Srisonchai, Enghoff & Panha, sp. n. from Chumphon Province, S.krabiensis Srisonchai, Enghoff & Panha, sp. n. (type species) and S.sutchariti Srisonchai, Enghoff & Panha, sp. n. from Krabi Province, S.uncus Srisonchai, Enghoff & Panha, sp. n., and S.macaca Srisonchai, Enghoff & Panha, sp. n. from Phang Nga Province; as well as one from Malaysia, S.tortioverpa Srisonchai, Enghoff & Panha, sp. n., and one from Myanmar, S.efefi Srisonchai, Enghoff & Panha, sp. n. The new genus is endemic to South Myanmar, South Thailand, and Malaysia, and all new species are restricted to limestone habitats. All were exclusively found living on humid rock walls and/or inside small caves. Complete illustrations of external morphological characters, an identification key, and a distribution map are provided.
    Matched MeSH terms: Calcium Carbonate
  19. Siti Rohana Ahmad, Salmah Husseinsyah, Kamarudin Hussin
    MyJurnal
    In this study, dynamic vulcanization process was used to improve the thermal properties of calcium carbonate filled composites. The composites were prepared using a Z-blade mixer at 180oC and rotor speed 50rpm. Thermogravimetric analysis (TGA) and Differential scanning calorimetry (DSC) techniques were used to analyze the thermal properties of the composites. The vulcanized and unvulcanized PP/EPDM composites were filled by CaCO3 at 0, 10, 20, 30, and 40 %wt. Meanwhile, thermogravimetric analysis indicates that the total weight loss of PP/EPDM/CaCO3 composites decreased with increasing filler loading. Dynamic vulcanized composites have higher thermal stability, while the crystallinity of PP/EPDM/CaCO3 composites were increased as compared to unvulcanized composites. Therefore, the thermal properties were improved by the presence of
    dynamic vulcanization process.
    Matched MeSH terms: Calcium Carbonate
  20. Siti Rohana Ahmad, Salmah Husseinsyah, Kamarudin Hussin
    MyJurnal
    A chemical modifier (acrylic acid) was used to improve the thermal properties of polypropylene/ ethylene propylene diene terpolymer/calcium carbonate (PP/EPDM/CaCO3) composites. Treated
    and untreated PP/EPDM composites were filled by CaCO3 at 0, 20 and 40% wt. The composites
    were prepared using Z-blade mixer machine at 180oC and 50 rpm of rotor speed. Thermogravimetric
    analysis (TGA) and differential scanning calorimetry (DSC) methods were used to analyze the thermal properties of the composites. Thermogravimetric analysis indicated that the total weight loss of PP/EPDM/CaCO3 composites decreased with the increasing filler loading for the treated and untreated composites. Meanwhile, the presence of acrylic acid was found to have increased the thermal stability and crystallinity of PP/EPDM/CaCO3
    .
    Matched MeSH terms: Calcium Carbonate
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links