Batu Reput’ is primary sediment mineral and abundantly found in Perlis. Perlis is one of the major producers of ‘Batu Reput’ in Malaysia that content large deposit of high-purity dolomite [CaMg (CO3)2]. Pure samples of ‘Batu Reput’ recently explored in the Koperasi Rimba Mas Padang Besar Quarry were investigated for their physical, chemical and mineralogical composition. SEM and XRD analysis methods were applied. The potential of ‘Batu Reput’ as a raw material in fertilizer production was investigated in this paper.
Vatica najibiana Ummul-Nazrah (Dipterocarpaceae), from the Relai Forest Reserve, Gua Musang, Kelantan and Gua Tanggang, Merapoh, Pahang, is described and illustrated. This species is Endangered and known from small populations restricted to two isolated karst limestone hills. The type locality, Relai Forest Reserve limestone, is currently under threat from encroaching oil palm plantations and ongoing logging, which, if it continues, will threaten the Kelantan population with extinction. The morphology of V. najibiana and the similar V. odorata subsp. odorata and V. harmandiana is compared.
This study focused on improving the producer gas quality using radio frequency (RF) tar thermocatalytic treatment reactor. The producer gas containing tar, particles and water was directly passed at a particular flow rate into the RF reactor at various temperatures for catalytic and thermal treatments. Thermal treatment generates higher heating value of 5.76 MJ Nm(-3) at 1200°C. Catalytic treatments using both dolomite and Y-zeolite provide high tar and particles conversion efficiencies of about 97% on average. The result also showed that light poly-aromatic hydrocarbons especially naphthalene and aromatic compounds particularly benzene and toluene were still found even at higher reaction temperatures. Low energy intensive RF tar thermocatalytic treatment was found to be effective for upgrading the producer gas quality to meet the end user requirements and increasing its energy content.
Two new species, Phlegmariurus iminii Kiew (Lycopodiaceae) from limestone karst and P. monticola Kiew from montane habitats, are described from Peninsular Malaysia and a new combination is made for Phlegmariurus pinifolius (Trevis.) Kiew. Phlegmariurus iminii, known from a single hill threatened by quarrying, is Critically Endangered; while P. monticola and P. pinifolius that are relatively widespread are of Least Concern.
A new species of limestone cave-adapted gecko of the Cyrtodactylus pulchellus complex, C. hidupselamanya sp. nov., is described from an isolated karst formation at Felda Chiku 7, Kelantan, Peninsular Malaysia. This formation is scheduled to be completely quarried for its mineral content. From what we know about the life history of C. hidupselamanya sp. nov., this will result in its extinction. A new limestone forest-adapted species, C. lenggongensis sp. nov., from the Lenggong Valley, Perak was previously considered to be conspecific with C. bintangrendah but a re-evaluation of morphological, color pattern, molecular, and habitat preference indicates that it too is a unique lineage worthy of specific recognition. Fortunately C. lenggongensis sp. nov. is not facing extinction because its habitat is protected by the UNESCO Archaeological Heritage of the Lenggong Valley due to the archaeological significance of that region. Both new species can be distinguished from all other species of Cyrtodactylus based on molecular evidence from the mitochondrial gene ND2 and its flanking tRNAs as well as having unique combinations of morphological and color pattern characteristics. Using a time-calibrated BEAST analysis we inferred that the evolution of a limestone habitat preference and its apparently attendant morphological and color pattern adaptations evolved independently at least four times in the C. pulchellus complex between 26.1 and 0.78 mya.
Engineered aluminum oxide (Al2O3), titanium dioxide (TiO2), and silicon dioxide (SiO2) nanoparticles (NPs) are utilized in a broad range of applications; causing noticeable quantities of these materials to be released into the environment. Issues of how and where these particles are distributed into the subsurface aquatic environment remain as major challenges for those in environmental engineering. In this study, transport and retention of Al2O3, TiO2, and SiO2 NPs through various saturated porous media were investigated. Vertical columns were packed with quartz-sand, limestone, and dolomite grains. The NPs were introduced as a pulse suspended in aqueous solutions and breakthrough curves in the column outlet were generated using an ultraviolet-visible spectrophotometer. It was found that Al2O3 and TiO2 NPs are easily transported through limestone and dolomite porous media whereas NPs recoveries were achieved two times higher than those found in the quartz-sand. The highest and lowest SiO2-NPs recoveries were also achieved from the quartz-sand and limestone columns, respectively. The experimental results closely replicated the general trends predicted by the filtration and DLVO calculations. Overall, NPs mobility through a porous medium was found to be strongly dependent on NP surface charge, NP suspension stability against deposition, and porous medium surface charge and roughness.
In the present study, natural coral of porites species was used as scaffold combined with in vitro expanded bone marrow stem cell derived osteoblasts (BMSC-DO), to develop a tissue-engineered bone graft in a rat model. Coral was molded into the shape of rat mandible seeded with 5x10(6) /ml BMSC-DO subsequently implanted subcutaneously in the back of 5 week Sprague dawely rats for 3 months. Coral alone was implanted as a control. The implants were harvest and processed for gross inspection and histological observations. The results showed that newly bone grafts were successfully formed coral seeded with cells group showed smooth highly vascularized like bone tissue. Histological sections revealed mature bone formation and lots of blood vessel, the bone formation occurred in the manner resemble intramembraneous bone formation. This study demonstrates that coral can be use as a suitable scaffold material for delivering bone marrow mesenchymal stem cells in tissue engineering.
The impact of ionic strength (from 0.003 to 500mM) and salt type (NaCl vs MgCl2) on transport and retention of titanium dioxide (TiO2) nanoparticles (NPs) in saturated limestone porous media was systematically studied. Vertical columns were packed with limestone grains. The NPs were introduced as a pulse suspended in aqueous solutions and breakthrough curves in the column outlet were generated using an ultraviolent-visible spectrometry. Presence of NaCl and MgCl2 in the suspensions were found to have a significant influence on the electrokinetic properties of the NP aggregates and limestone grains. In NaCl and MgCl2 solutions, the deposition rates of the TiO2-NP aggregates were enhanced with the increase in ionic strength, a trend consistent with traditional Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. Furthermore, the NP aggregates retention increased in the porous media with ionic strength. The presence of salts also caused a considerable delay in the NPs breakthrough time. MgCl2 as compared to NaCl was found to be more effective agent for the deposition and retention of TiO2-NPs. The experimental results followed closely the general trends predicted by the filtration and DLVO calculations. Overall, it was found that TiO2-NP mobility in the limestone porous media depends on ionic strength and salt type.
Present research concerns the TL signal stored in chalk of the variety commercially available for writing on blackboards. Samples of this have been subjected to x-ray irradiation, the key dosimetric parameters investigated including dose and energy response, sensitivity, fading and glow curve analysis. Three types of chalk have been investigated, each in five different colours. The samples were annealed at 323 K prior to irradiation. For all three chalk types and all five colours, the dose response has been found linear over the investigated dose range, 0-9 Gy. Regardless of type or colour, photoelectric energy dependency is apparent at the low energy end down to the lowest investigated accelerating potential of 30 kV. Crayola (Yellow) has shown the greatest TL sensitivity, thus selection has been made to limit further analysis to this medium alone, specifically in respect of glow curve and fading study. In addition, elemental compositional and structural change characterizations were made for the same medium, utilizing Energy Dispersive X-Ray (EDX) and Raman spectroscopy, respectively.
A new effective RF tar thermocatalytic treatment process with low energy intensive has been proposed to remove tar from biomass gasification. Toluene and naphthalene as biomass tar model compounds were removed via both thermal and catalytic treatment over a wide temperature range from 850 °C to 1200 °C and 450 °C to 900 °C, respectively at residence time of 0-0.7 s. Thermal characteristics of the new technique are also described in this paper. This study clearly clarified that toluene was much easier to be removed than naphthalene. Soot was found as the final product of thermal treatment of the tar model and completely removed during catalytic treatment. Radical reactions generated by RF non-thermal effect improve the tar removal. The study showed that Y-zeolite has better catalytic activity compared to dolomite on toluene and naphthalene removal due to its acidic nature and large surface area, even at lower reaction temperature of about 550 °C.
Bird surveys were conducted in the Bukit Kepala Gajah limestone area in Lenggong, Perak from July 2010 to January 2011. The study area was divided into three zones: forest edge, forest intermediate and forest interior. A point-count distance sampling method was used in the bird surveys. The study recorded 7789 detections, representing 100 bird species belonging to 28 families. Pycnonotidae, Timaliidae and Nectariniidae were the dominant families overall and showed the highest number of observations recorded in the study area whereas Motacillidae showed the fewest observations. The bird species were grouped into three feeding guilds: insectivores, frugivores and others (omnivores, carnivores, nectarivores and granivores). The species richness of insectivorous birds differed significantly among the forest zones sampled (Kruskal-Wallis: α=0.05, H=10.979, d.f.=2, p=0.004), with more insectivorous birds occurring in the forest interior. No significant differences were found among the zones in the species richness of either the frugivore guild or the composite others guild.
Four new species of semiterrestrial gecarcinucid crabs are described from limestone and sandstone habitats in southwestern Sarawak, Malaysia: Terrathelphusa aglaia n. sp., T. cerina n. sp., T. kundong n. sp., and T. mas n. sp. The taxonomy of T. kuchingensis (Nobili, 1901) is discussed, its precise identity ascertained from fresh material, and its actual distribution determined. This increases the number of Terrathelphusa species in Borneo to eight.
A chemical modifier (acrylic acid) was used to improve the thermal properties of polypropylene/ ethylene propylene diene terpolymer/calcium carbonate (PP/EPDM/CaCO3) composites. Treated
and untreated PP/EPDM composites were filled by CaCO3 at 0, 20 and 40% wt. The composites
were prepared using Z-blade mixer machine at 180oC and 50 rpm of rotor speed. Thermogravimetric
analysis (TGA) and differential scanning calorimetry (DSC) methods were used to analyze the thermal properties of the composites. Thermogravimetric analysis indicated that the total weight loss of PP/EPDM/CaCO3 composites decreased with the increasing filler loading for the treated and untreated composites. Meanwhile, the presence of acrylic acid was found to have increased the thermal stability and crystallinity of PP/EPDM/CaCO3
.
Acid sulfate soil characterized by pyrite (FeS2) which produces high acidity (soil pH < 3.5) and release high amount of Al3+ and Fe2+. Application of 4 t ha-1 Ground Magnesium Limestone (GML), is a common rate used for acid sulfate soil by the rice farmers in Malaysia. Therefore, this study was conducted to evaluate the integral effect of ground magnesium limestone (GML) and calcium silicate and to determine the optimal combination on acid sulfate soils in Malaysia. The acid sulfate soils were incubated under the submerged condition for 120 days with GML (0, 2, 4, 6 t ha-1) in combination with calcium silicate (0, 1, 2, 3 t ha-1) arranged in a Completely Randomized Design (CRD). The soil was sampled after 30, 60, 90 and 120 days of incubation and analyzed for soil pH, exchangeable Al, Ca, Mg, K and available Si. A total of 2 out of 16 combinations met the desired soil requirement for rice cultivation. The desired chemical soil characteristics for rice cultivation are soil pH > 4, exchangeable Al < 2 cmolc Kg-1, exchangeable Ca > 2 cmolc kg-1, exchangeable Mg > 1 cmolc kg-1 and Si content > 43 mg kg-1. The combinations are i) 2 t ha-1 calcium silicate + 2 t ha-1 GML, and ii) 3 t ha-1 calcium silicate + 2 t ha-1 GML, respectively. These combination rates met the desired requirement of soil chemical characteristics for rice cultivation. Soil acidity was reduced by a gradual release of Ca2+ and SiO32- from calcium silicate continuously filling the exchange sites and reducing the potential of extra (free) H+ availability in the soil system. Combination of calcium silicate and GML, shows the ameliorative effect with; i) release of Ca, ii) binding of Al3+ making it inert Al-hydroxides and, iii) bind H+ to produce water molecules.
The massive growth of construction industry especially in the developing countries results in extensive quarrying activities which ultimately would lead to the depletion of natural resources. Apart from extensive extraction of the natural granite from the earth for concrete production, marble production industry is also majorly contributing to the quarrying activities. In addition, high volume of waste is generated by the marble production industry as 70% of marble is wasted during the production such as quarrying, cutting, processing and others which is environmental unfriendly. In a way to achieve sustainable construction, the present study is to utilise the waste marble in replacing the coarse aggregate in concrete production. The engineering performance including workability, compressive strength, ultrasonic pulse velocity (UPV) and chloride penetration were analysed. The raw waste marble obtained from the industry were crushed and sieved into maximum size 20 mm and used to replace the coarse aggregate at the level of 20%, 40%, 60%, 80% and 100% respectively. Results show that 60% of the replacement level has yield to optimum result by achieving the highest compressive strength and UPV at approximate 5% higher than the control. Meanwhile, the effect on chloride penetration resistance is more significant, i.e. approximate 19% better than the control. However, increasing the replacement level of waste marble has no significant effect on workability, although an increasing trend was observed.
To evaluate the correlation of the intragranular textures on the physical properties of coarse aggregates, four aggregates samples consisting of three granitoid sources and one limestone have been studied. The role played by intragranular textures (mineral assembladge, grain size and grain boundaries) in influencing the physical properties are potentially significant to the fact that such textural variation may complicate the aggregate strength. This study indicates that the aggregates exhibited variation in textural habits. The granitoid aggregates, which is rich with silicate composition has typical heterogranular textures of porphyritic and equigranular grain structures. Whereas the limestone aggregate comprises of bioclast and peloid allochems cemented by micrite and spar. The granitoid aggregates showed better dispersed characters and had extremely interlocking crystal boundaries which have more physical strength compared to a carbonate aggregate.
Identification of a possible source of engineering geological hazard in the limestone area such as cavities, sinkholes and an underground cavern have become necessity for site investigation before any construction of roads, bridges and buildings are carried out. The study is also necessary for tunneling and underground mining works where knowledge of the engineering properties of the rock mass is very important in order to assess the suitability and safety of a proposed building. Geophysical techniques have been widely used in engineering geological study to deal with such problems that normally arise at construction sites with limestone bedrock. In this study, shallow seismic reflection technique and dipole-dipole geoelectrical methods were used to detect the presence of cavity in lime stone area of Batu Cave, Kuala Lumpur. The exact location and depth of cavities in the area were determined from the existing borehole data and report provided by the Geological Survey Department of Malaysia. Based on the borehole data, several cavities that were filled-up with water and fine silt are encountered at depths of 15.7m to 17.8m, 20.2m to 21.1m and 21.4m to 25.7m. Three shallow seismic reflection profiles were established on the cavity area and the results show that the cavities in the limestone occur in the form of 20 to 30m long subterranean channel of 15 to 30 m depth. Dipole-dipole resistivity survey conducted on seismic lines one and three also indicates the presence of the channel and cavities in the limestone.
Pengecaman punca bencana geologi kejuruteraan di kawasan batu kapur seperti lohong batu kapur, kewujudan lubang benam dan gua-gua batu kapur telah menjadi amat penting dalam penyiasatan tapak sebelum sesuatu pembinaan seperti jalan raya, jambatan dan bangunan dilakukan. Begitu juga dalam kerja-kerja penerowongan dan perlombongan, pengetahuan asas sifat kejuruteraan jasad batuan amat perlu diketahui untuk menitai kesesuaian dan keselamatan bangunan yang bakal dibina. Teknik geofizik telah digunakan secara meluas dalam kajian geologi kejuruteraan untuk menangani masalah yang terdapat di tapak-tapak binaan yang mempunyai batu kapur sebagai batuan dasar. Dalam kajian ini teknik seismos pantulan cetek dan kaedah geoelektrik dwikutub-dwikutub telah digunakan untuk mengesan rongga batu kapur yang terdapat di kawasan Batu Caves, Kuala Lumpur. Kedudukan dan kedalaman rongga batu kapur di kawasan kajian telah ditentukan melalui data lubang gerudi dan laporan yang diperoleh daripada Jabatan Kajibumi Malaysia. Berdasarkan data lubang gerudi tersebut terdapat beberapa rongga yang terisi air dan pasir halus berlodak di kedalaman 15.7 m hingga 17.8 m, 20.2 m hingga 21.1 m dan 21.4 m hingga 25.7 m. Tiga profil seismos pantulan cetek telah dibuat di kawasan berongga tersebut dan hasil survei menunjukkan rongga dalam batu kapur tersebut membentuk palung sepanjang hampir 20 - 30 m pada kedalaman antara 15 m hingga 30 m. Rentisan survei geoelektrik dwikutub yang dilakukan pada profil seismos satu dan tiga juga memperlihatkan kehadiran lohong dan palung dalam batu kapur tersebut.
The Semantan Formation which is Middle to Upper Triassic age, comprises a rapidly alternating sequence of carbonaceous shale, siltstone and rhyolite tuff with a few lenses of chert, conglomerate and recrystallised limestone. The shale and tuff make up the bulk of the sequence. Jaafar Ahmad (1976) was introduced the formation name of the rock sequence in Karak-Temerloh area, but the similar sequence (in term of lithology, paleontology and structural pattern) found in the other areas were given different names. After an extensive study, the following formations or part of them, may be include in the Semantan Formation; Raub Series (Scrivenor 1911); Calcareous Formation (Richardson 1939); Calcareous Series (Richardson 1947); Younger arenaceous Series (Alexander 1956); Raub Group (Alexander 1959); Jengka Pass Formation (Ichikawa et al. 1966); Kerdau Formation (Burton 1973a); part of Jelai Formation (Burton 1973a); Gemas Formation (Lum 1977); Jurong Formation (Burton 1973a); Pahang Volcanic Series (Hutchison 1973c).
Formasi Semantan merupakan jujukan batuan sedimen yang berusia Trias Tengah - Akhir di Jalur Tengah Semenanjung Malaysia. Jujukan ini terdiri daripada selang lapis batuan syal berkarbon, batu lodak, dan batu pasir yang kebanyakannya bertuf, serta terdapat kekanta konglomerat, batu kapur dan rijang dalam selang lapis ini. Syal adalah unit yang paling dominan dalam formasi ini. Jaafar Ahmad (1976) menamakan jujukan ini untuk kawasan Karak - Temerloh, tetapi jujukan yang serupa (dari segi litologi, paleontologi dan gaya struktur) juga ditemui di kawasan lain, tetapi dipanggil dengan nama lain. Dari hasil kajian menyeluruh yang telah dijalankan, didapati nama-nama unit batuan berikut atau sebahagian daripadanya mungkin merupakan penamaan yang serupa untuk Formasi Semantan, iaitu Siri Raub (Scrivenor 1911), Formasi Berkapur (Richardson 1939), Siri Berkapur (Richardson 1947), Siri Arenit Muda (Alexander 1958), sebahagian Kumpulan Raub (Alexander 1959), Formasi Jengka Pass (Ichikawa et al. 1966), Formasi Kerdau (Burton 1973a), sebahagian Formasi Jelai (Burton 1973a), Formasi Gemas (Lum 1977), Formasi Jurong (Burton 1973a) dan Siri Volkano Pahang (Hutchison 1973).
The current research investigates synthesis of methyl esters by transesterification of waste cooking oil in a heterogeneous system, using barium meliorated construction site waste marble as solid base catalyst. The pretreated catalyst was calcined at 830 °C for 4h prior to its activity test to obtained solid oxide characterized by scanning electron microscopy/energy dispersive spectroscopy, BET surface area and pore size measurement. It was found that the as prepared catalyst has large pores which contributed to its high activity in transesterification reaction. The methyl ester yield of 88% was obtained when the methanol/oil molar ratio was 9:1, reaction temperature at 65 °C, reaction time 3h and catalyst/oil mass ratio of 3.0 wt.%. The catalyst can be reused over three cycles, offer low operating conditions, reduce energy consumption and waste generation in the production of biodiesel.
To improve textural attributes of puffed corn-fish snack, the effects of 1%, 1.5%, and 2% of calcium carbonate, magnesium silicate (talc), sodium bicarbonate as well as 5% and 10% of wheat bran (as the nucleating materials) on textural attributes were studied. Sensory evaluation, bulk density, expansion ratio, maximum force, and count peaks were measured using the Kramer test. The results showed that all of the additives except bran significantly enhanced the texture. Among them, talc at 0.5% was the best to enhance the density and expansion ratio. Effects of using 0.5% talc on puffed corn-fish snack microstructure were studied using scanning electron microscopy. The average cell diameter of 109 ± 48 μm and cell numbers per square centimeter of 67.4 for talc-treated products were obtained, while for nontalc-treated extrudates, average cell diameter of 798 ± 361 μm and cell numbers per square centimeter of 13.9 were found. Incorporation of 0.5% w/w of magnesium silicate reduced (7-fold) the average cell diameter while increased (4-fold) the cell number.