Displaying publications 1 - 20 of 162 in total

Abstract:
Sort:
  1. Fulltext A high resolution capacitive sensing system for the measurement of water content in crude oil
    Zubair M, Tang TB
    Sensors (Basel), 2014;14(7):11351-61.
    PMID: 24967606 DOI: 10.3390/s140711351
    This paper presents the design of a non-intrusive system to measure ultra-low water content in crude oil. The system is based on a capacitance to phase angle conversion method. Water content is measured with a capacitance sensor comprising two semi-cylindrical electrodes mounted on the outer side of a glass tube. The presence of water induces a capacitance change that in turn converts into a phase angle, with respect to a main oscillator. A differential sensing technique is adopted not only to ensure high immunity against temperature variation and background noise, but also to eliminate phase jitter and amplitude variation of the main oscillator that could destabilize the output. The complete capacitive sensing system was implemented in hardware and experiment results using crude oil samples demonstrated that a resolution of ± 50 ppm of water content in crude oil was achieved by the proposed design.
    Matched MeSH terms: Computers
  2. Can Bahraini patients accept e-health systems?
    Zolait A, Radhi N, Alhowaishi MM, Sundram VPK, Aldoseri LM
    Int J Health Care Qual Assur, 2019 May 13;32(4):720-730.
    PMID: 31111785 DOI: 10.1108/IJHCQA-05-2018-0106
    PURPOSE: The purpose of this paper is to examine whether Bahraini individuals accept e-health system and the prominent factors affecting e-health system adoption in Bahrain.

    DESIGN/METHODOLOGY/APPROACH: The authors adopted a quantitative and qualitative approach, i.e., a self-administered questionnaire, unstructured and a semi-structured interview, which were used to collect the data. A questionnaire was distributed to Bahraini residents selected randomly. The framework was based on the technology acceptance model (TAM) and theory of reasoned action (TRA). Important variables from both the TAM model and TRA theory were extracted and jointly used to build the research model.

    FINDINGS: The findings indicated that the most factors affecting e-health adoption are trust, health literacy and attitude. Additionally, people in the private and government sectors understand e-health benefits.

    PRACTICAL IMPLICATIONS: If healthcare professionals understand the factors affecting e-health system adoption from an individual and organisational perspective, then nurses, pharmacists and others will be more conscious about e-health and its adoption status.

    ORIGINALITY/VALUE: E-health system adoption has become increasingly important to governments, individuals, and researchers in recent years. A novel research framework, based on TAM and TRA, was used to produce a new integrated model.

    Matched MeSH terms: Attitude to Computers*
  3. Fulltext A functional pipeline framework for landmark identification on 3D surface extracted from volumetric data
    Zheng P, Belaton B, Liao IY, Rajion ZA
    PLoS One, 2017;12(11):e0187558.
    PMID: 29121077 DOI: 10.1371/journal.pone.0187558
    Landmarks, also known as feature points, are one of the important geometry primitives that describe the predominant characteristics of a surface. In this study we proposed a self-contained framework to generate landmarks on surfaces extracted from volumetric data. The framework is designed to be a three-fold pipeline structure. The pipeline comprises three phases which are surface construction, crest line extraction and landmark identification. With input as a volumetric data and output as landmarks, the pipeline takes in 3D raw data and produces a 0D geometry feature. In each phase we investigate existing methods, extend and tailor the methods to fit the pipeline design. The pipeline is designed to be functional as it is modularised to have a dedicated function in each phase. We extended the implicit surface polygonizer for surface construction in first phase, developed an alternative way to compute the gradient of maximal curvature for crest line extraction in second phase and finally we combine curvature information and K-means clustering method to identify the landmarks in the third phase. The implementations are firstly carried on a controlled environment, i.e. synthetic data, for proof of concept. Then the method is tested on a small scale data set and subsequently on huge data set. Issues and justifications are addressed accordingly for each phase.
    Matched MeSH terms: Computers
  4. Fulltext Retrofitting ancient timber glulam mortise & tenon construction joints through computer-aided laser cutting
    Zhan Z, Wang C, Yap JBH, Loi MS
    Heliyon, 2020 Apr;6(4):e03671.
    PMID: 32382668 DOI: 10.1016/j.heliyon.2020.e03671
    This study is aimed to rationalise and demonstrate the efficacy of utilising laser cutting technique in the fabrication of glulam mortise & tenon joints in timber frame. Trial-and-error experiments aided by laser cutter were conducted to produce 3D timber mortise & tenon joints models. The two main instruments used were 3D modelling software and the laser cutter TH 1390/6090. Plywood was chosen because it could produce smooth and accurate cut edges whereby the surface could remain crack-free, and it could increase stability due to its laminated nature. Google SketchUp was used for modelling and Laser CAD v7.52 was used to transfer the 3D models to the laser cutter because it is compatible with AI, BMP, PLT, DXF and DST templates. Four models were designed and fabricated in which the trial-and-error experiments proved laser cutting could speed up the manufacturing process with superb quality and high uniformity. Precision laser cutting supports easy automation, produces small heat-affected zone, minimises deformity, relatively quiet and produces low amount of waste. The LaserCAD could not process 3D images directly but needed 2D images to be transferred, so layering and unfolding works were therefore needed. This study revealed a significant potential of rapid manufacturability of mortise & tenon joints with high-quality and high-uniformity through computer-aided laser cutting technique for wide applications in the built environment.
    Matched MeSH terms: Computers
  5. The relationship between psychosocial work factors, work stress and computer-related musculoskeletal discomforts among computer users in Malaysia
    Zakerian SA, Subramaniam ID
    Int J Occup Saf Ergon, 2009;15(4):425-34.
    PMID: 20003776
    Increasing numbers of workers use computer for work. So, especially among office workers, there is a high risk of musculoskeletal discomforts. This study examined the associations among 3 factors, psychosocial work factors, work stress and musculoskeletal discomforts. These associations were examined via a questionnaire survey on 30 office workers (at a university in Malaysia), whose jobs required an extensive use of computers. The questionnaire was distributed and collected daily for 20 days. While the results indicated a significant relationship among psychosocial work factors, work stress and musculoskeletal discomfort, 3 psychosocial work factors were found to be more important than others in both work stress and musculoskeletal discomfort: job demands, negative social interaction and computer-related problems. To further develop study design, it is necessary to investigate industrial and other workers who have experienced musculoskeletal discomforts and work stress.
    Matched MeSH terms: Attitude to Computers
  6. Fulltext Advancements in Monitoring Water Quality Based on Various Sensing Methods: A Systematic Review
    Zainurin SN, Wan Ismail WZ, Mahamud SNI, Ismail I, Jamaludin J, Ariffin KNZ, et al.
    Int J Environ Res Public Health, 2022 Oct 28;19(21).
    PMID: 36360992 DOI: 10.3390/ijerph192114080
    Nowadays, water pollution has become a global issue affecting most countries in the world. Water quality should be monitored to alert authorities on water pollution, so that action can be taken quickly. The objective of the review is to study various conventional and modern methods of monitoring water quality to identify the strengths and weaknesses of the methods. The methods include the Internet of Things (IoT), virtual sensing, cyber-physical system (CPS), and optical techniques. In this review, water quality monitoring systems and process control in several countries, such as New Zealand, China, Serbia, Bangladesh, Malaysia, and India, are discussed. Conventional and modern methods are compared in terms of parameters, complexity, and reliability. Recent methods of water quality monitoring techniques are also reviewed to study any loopholes in modern methods. We found that CPS is suitable for monitoring water quality due to a good combination of physical and computational algorithms. Its embedded sensors, processors, and actuators can be designed to detect and interact with environments. We believe that conventional methods are costly and complex, whereas modern methods are also expensive but simpler with real-time detection. Traditional approaches are more time-consuming and expensive due to the high maintenance of laboratory facilities, involve chemical materials, and are inefficient for on-site monitoring applications. Apart from that, previous monitoring methods have issues in achieving a reliable measurement of water quality parameters in real time. There are still limitations in instruments for detecting pollutants and producing valuable information on water quality. Thus, the review is important in order to compare previous methods and to improve current water quality assessments in terms of reliability and cost-effectiveness.
    Matched MeSH terms: Computers
  7. Clinical evaluation of watermarked medical images
    Zain JM, Fauzi AM, Aziz AA
    Conf Proc IEEE Eng Med Biol Soc, 2007 10 20;2006:5459-62.
    PMID: 17946306
    Digital watermarking medical images provides security to the images. The purpose of this study was to see whether digitally watermarked images changed clinical diagnoses when assessed by radiologists. We embedded 256 bits watermark to various medical images in the region of non-interest (RONI) and 480K bits in both region of interest (ROI) and RONI. Our results showed that watermarking medical images did not alter clinical diagnoses. In addition, there was no difference in image quality when visually assessed by the medical radiologists. We therefore concluded that digital watermarking medical images were safe in terms of preserving image quality for clinical purposes.
    Matched MeSH terms: Computers
  8. Restoration of engraved marks on steel surfaces by etching technique
    Zaili MA, Kuppuswamy R, Harun H
    Forensic Sci Int, 2007 Aug 24;171(1):27-32.
    PMID: 17088038
    It is known that restoration of erased engraved identification marks on the engine and the chassis of a car or on a firearm has low success rate. Unlike stamping, engraving on a metal surface leaves no pronounced, permanent subsurface deformation in the crystalline structure, also called dislocation that can be revealed by suitable methods. Hence, the current research work investigated whether metallographic reagents used in the restoration of stamp (compression) marks could be applied to recover engraved marks on steel surfaces and also to establish the sensitivity and effectiveness of some of these reagents for the restoration of the marks. Experiments were conducted by mechanically engraving alphanumeric characters on several steel plates using a computer controlled engraving machine called Gravograph. The markings were later erased from the above steel plates by removing the metal in stages of 0.01 mm through 0.04 mm below the bottom of the engraving. Several plates were thus prepared wherein each one had been abraded to a specific depth. Then eight metallographic reagents were tested on each one of the above erased plates using a swabbing technique. The results had shown that while most of the reagents were able to restore marks up to certain levels of erasure, the reagent 5 g copper sulphate, 60 ml water, 30 ml concentrated ammonium hydroxide and 60 ml concentrated hydrochloric acid restored marks erased to a depth of 0.04 mm below the engraving depth, thus presenting itself the most sensitive reagent. Quite significantly, the above reagent was also able to decipher successfully the original engraved marks that had been erased and engraved with a new number, or obliterated by centre punching. The results of this research work should benefit the forensic practitioners engaged in the serial number recovery on vehicles, firearms and other objects.
    Matched MeSH terms: Computers
  9. Fulltext The effect of the SIMS Programme versus existing preschool oral healthcare programme on oral hygiene level of preschool children: study protocol for a cluster randomised controlled trial
    Yusof ZYM, Anwar NH, Mohd Nor NA, Nor MM, Mustafa SE
    Trials, 2021 Feb 22;22(1):156.
    PMID: 33618735 DOI: 10.1186/s13063-021-05111-0
    BACKGROUND: Despite the implementation of the preschool oral healthcare programme (POHP) for 5-6-year-old children over the past 3 decades in Malaysia, dental plaque and caries levels in this age group remain high. Among the child-level attributable factors are unhealthy self-care behaviours (poor oral hygiene and high sugary diet). In order to improve the children's oral health, an improved programme called the 'Senyuman Indah Milik Semua' Programme (SIMSP) or 'Beautiful Smile for All' programme is introduced. In this programme, a triad of dental hygienist-teacher-parent works together to improve children's oral hygiene levels compared with the existing POHP that involves dental hygienists only. The aim of this study is to compare the effect of the SIMSP versus the existing POHP on oral hygiene levels of 5-6-year-old children in the Kampar district, Perak state, Malaysia.

    METHODS: This study is a pragmatic, cluster-randomised, parallel-group, matched pair, controlled trial with blinded outcome assessment. Randomisation is performed using a computer-generated table with a 1:1 allocation comparing the SIMSP and the POHP involving 28 preschools in the Kampar district, Perak, Malaysia. The intervention consists of preschool visits by a group of dental therapists, in-class oral health lessons and daily toothbrushing conducted by class teacher, child home toothbrushing supervised by parents, and infographic oral health messages to parents. The control consists of the existing POHP that involves preschool visits by a group of dental therapists only. The trial lasts for 6 months. Primary outcome variable is the mean plaque score change after 6 months. To determine the feasibility of the SIMSP, a process evaluation will be conducted using the perspectives of dental therapists, teachers, and parents on the appropriateness, effectiveness, facilitators, and barriers to the SIMSP implementation as well as an audit trail to assess the trial intervention.

    DISCUSSION: Cluster randomisation may lead to a random effect and cluster selection bias. These factors will be accounted for when analysing the data and interpreting the outcomes. The effectiveness of the SIMSP will be evaluated by comparing the results with those of the POHP.

    TRIAL REGISTRATION: ClinicalTrials.gov NCT04339647 . Registered on 5 April 2020 - Retrospectively registered.

    Matched MeSH terms: Computers
  10. A case study evaluation of a Critical Care Information System adoption using the socio-technical and fit approach
    Yusof MM
    Int J Med Inform, 2015 Jul;84(7):486-99.
    PMID: 25881560 DOI: 10.1016/j.ijmedinf.2015.03.001
    Clinical information systems have long been used in intensive care units but reports on their adoption and benefits are limited. This study evaluated a Critical Care Information System implementation.
    Matched MeSH terms: Attitude to Computers*
  11. Fulltext Rootkit guard (RG) - an architecture for rootkit resistant file-system implementation based on TPM
    Yew, Teh Jia, Khairulmizam Samsudin, Nur Izura Udzir, Shaiful Jahari Hashim
    Pertanika Journal of Science & Technology, 2013;21(2):507-520.
    MyJurnal
    Recent rootkit-attack mitigation work neglected to address the integrity of the mitigation tool itself. Both detection and prevention arms of current rootkit-attack mitigation solutions can be given credit for the advancement of multiple methodologies for rootkit defense but if the defense system itself is compromised, how is the defense system to be trusted? Another deficiency not addressed is how platform integrity can be preserved without availability of current RIDS or RIPS solutions, which operate only upon the loading of the kernel i.e. without availability of a trusted boot environment. To address these deficiencies, we present our architecture for solving rootkit persistence – Rootkit Guard (RG). RG is a marriage between TrustedGRUB (providing trusted boot), IMA (Integrity Measurement Architecture) (serves as RIDS) and SELinux (serves as RIPS). TPM hardware is utilised to provide total integrity of our platform via storage of the aggregate of the clean snapshot of our platform OS kernel into TPM hardware registers (i.e. the PCR) – of which no software attacks have been demonstrated to date. RG solves rootkit persistence by leveraging on one vital but simple strategy: the mounting of rootkit defense via prevention of the execution of configuration binaries or build initialisation scripts. We adopted the technique of rootkit persistence prevention via thwarting the initialisation of a rootkit’s installation procedure; if the rootkit is successfully installed, proper deployment via thwarting of the rootkit’s
    configuration is prevented. We had subjected the RG to 8 real world Linux 2.6 rootkits and the RG was successful in solving rootkit persistence in all 8 evaluated rootkits. In terms of performance, the RG introduced a maximum of 11% overhead and an average of 4% overhead, hence permitting deployment in production environments.
    Matched MeSH terms: Computers
  12. Fulltext Determination of moisture content in oil palm fruits using a five-port reflectometer
    Yee LK, Abbas Z, Jusoh MA, Yeow YK, Meng CE
    Sensors (Basel), 2011;11(4):4073-85.
    PMID: 22163837 DOI: 10.3390/s110404073
    This paper presents the development of a PC-based microwave five-port reflectometer for the determination of moisture content in oil palm fruits. The reflectometer was designed to measure both the magnitude and phase of the reflection coefficient of any passive microwave device. The stand-alone reflectometer consists of a PC, a microwave source, diode detectors and an analog to digital converter. All the measurement and data acquisition were done using Agilent VEE graphical programming software. The relectometer can be used with any reflection based microwave sensor. In this work, the application of the reflectometer as a useful instrument to determine the moisture content in oil palm fruits using monopole and coaxial sensors was demonstrated. Calibration equations between reflection coefficients and moisture content have been established for both sensors. The equation based on phase measurement of monopole sensor was found to be accurate within 5% in predicting moisture content in the fruits when compared to the conventional oven drying method.
    Matched MeSH terms: Computers*
  13. Sickle-cell trait in human biological and cultural evolution. Development of agriculture causing increased malaria is bound to gene-pool changes causing malaria reduction
    Wiesenfeld SL
    Science, 1967 Sep 08;157(3793):1134-40.
    PMID: 6038684
    The particular agricultural adaptation we have been considering is the ultimate determinant of the presence of malaria parasites in the intracellular environment of the human red blood cell. This change in the cellular environment is deleterious for normal individuals, but individuals with the sickle-cell gene are capable of changing their red-cell environment so that intense parasitism never develops. Normal individuals suffer higher mortality rates and lower fertility rates in a malarious environment than individuals with the sickle-cell trait do, so the latter contribute proportionately more people to succeeding generations.
    Matched MeSH terms: Computers
  14. Fulltext The communication of artificial intelligence and deep learning in computer tomography image recognition of epidemic pulmonary infectious diseases
    Wang W, Zhao X, Jia Y, Xu J
    PLoS One, 2024;19(2):e0297578.
    PMID: 38319912 DOI: 10.1371/journal.pone.0297578
    The objectives are to improve the diagnostic efficiency and accuracy of epidemic pulmonary infectious diseases and to study the application of artificial intelligence (AI) in pulmonary infectious disease diagnosis and public health management. The computer tomography (CT) images of 200 patients with pulmonary infectious disease are collected and input into the AI-assisted diagnosis software based on the deep learning (DL) model, "UAI, pulmonary infectious disease intelligent auxiliary analysis system", for lesion detection. By analyzing the principles of convolutional neural networks (CNN) in deep learning (DL), the study selects the AlexNet model for the recognition and classification of pulmonary infection CT images. The software automatically detects the pneumonia lesions, marks them in batches, and calculates the lesion volume. The result shows that the CT manifestations of the patients are mainly involved in multiple lobes and density, the most common shadow is the ground-glass opacity. The detection rate of the manual method is 95.30%, the misdetection rate is 0.20% and missed diagnosis rate is 4.50%; the detection rate of the DL-based AI-assisted lesion method is 99.76%, the misdetection rate is 0.08%, and the missed diagnosis rate is 0.08%. Therefore, the proposed model can effectively identify pulmonary infectious disease lesions and provide relevant data information to objectively diagnose pulmonary infectious disease and manage public health.
    Matched MeSH terms: Computers
  15. Fulltext Software development for real-time weed colour analysis
    Wan Ishak, W.I., Khairuddin Abdul Rahman
    Pertanika Journal of Science & Technology, 2010;18(2):-.
    MyJurnal
    The application of computer and machines for agricultural production has been one of the outstanding
    developments in Malaysian agriculture, especially in overcoming labour shortages in Oil Palm plantations. The on-line automated weedicide sprayer system was developed at Universiti Putra
    Malaysia to locate the existence and intensity of weeds in real-time environment and to spray the
    weedicides automatically and precisely. During the start of the spraying operation, the web camera
    will initially capture the image of weeds. The computer programme will compute the red, green, blue (RGB) values in the form of computer pixel. These values will be used as reference RGB values to be compared with the RGB values of the weeds captured real-time during the spraying operation. The sprayer nozzle will be turned ‘on’ or ‘off’, depending on the percentage or intensity of the green colour pixel value of weeds. The sprayer valve will open the nozzle/s when the camera detected the presence of weeds. The purpose is to reduce wastage, reduce labour, reduce cost, and control environment hazard.
    Matched MeSH terms: Computers
  16. Fulltext Central airway obstruction tumour debulking using rigid bronchoscopy and cryotherapy: a case report
    Wai Heng Chew, Abdul Aziz Marwan, Ummi Nadira Daut, Rosmadi Ismail, Mona Zaria Nasaruddin, Jamalul Azizi Abdul Rahman
    Malaysian Journal of Medicine and Health Sciences, 2020;16(108):75-77.
    MyJurnal
    Sarcomas usually frequented in the head and neck region of young adults. Trachea is a rare site, and due to scarce clinical data, its clinical outcome is unclear. We reported a case of 60-year old patient presented with progressive worsening shortness of breath, cough, and progressive worsening dysphagia. Computer tomography scan revealed extensive 2 lobulated soft tissue lesions within and surrounding the trachea at the T4 level. Rigid bronchoscopy with mass cryo-debulking was performed and ultimately synovial sarcoma was diagnosed. Shortness of breath was com- pletely relieved post-procedure.
    Matched MeSH terms: Computers
  17. Student-friendly methods of formative assessment in paediatrics
    Venkataramani P, Sadanandan T, Savanna RS, Sugathan S
    Med Educ, 2019 05;53(5):499-500.
    PMID: 30891812 DOI: 10.1111/medu.13860
    Matched MeSH terms: Computers, Handheld
  18. Fulltext Translating evidence to practice in the health professions: a randomized trial of Twitter vs Facebook
    Tunnecliff J, Weiner J, Gaida JE, Keating JL, Morgan P, Ilic D, et al.
    J Am Med Inform Assoc, 2017 03 01;24(2):403-408.
    PMID: 27357833 DOI: 10.1093/jamia/ocw085
    Objective: Our objective was to compare the change in research informed knowledge of health professionals and their intended practice following exposure to research information delivered by either Twitter or Facebook.

    Methods: This open label comparative design study randomized health professional clinicians to receive "practice points" on tendinopathy management via Twitter or Facebook. Evaluated outcomes included knowledge change and self-reported changes to clinical practice.

    Results: Four hundred and ninety-four participants were randomized to 1 of 2 groups and 317 responders analyzed. Both groups demonstrated improvements in knowledge and reported changes to clinical practice. There was no statistical difference between groups for the outcomes of knowledge change (P = .728), changes to clinical practice (P = .11) or the increased use of research information (P = .89). Practice points were shared more by the Twitter group (P 

    Matched MeSH terms: Attitude to Computers
  19. Fulltext Gaseous oxygen (GOX) system upgrade for mitigation to process safety risk of brownfield unit
    Toh, Jia Lin, Siti Aslina Hussain
    Journal of Occupational Safety and Health, 2018;15(2):47-56.
    MyJurnal
    Company A is a brownfield refinery that had been in service for over 25 years and has its own system to generate GOX for its needed utility usage. Noting of the hazards of GOX and in consideration of an aged refinery, this research is of the intent to evaluate the risk of GOX in the aspect of personnel and process safety; and to provide recommendation or mitigations planning with regards to Company A’s existing hardware through Bow Tie review. The analysis was done taking into consideration the data compiled as well as the inherited Process Safety Assessment (PSA) findings of Company A that served as secondary data to this research. It was observed that Company A personnel are well versed with the risk and hazards of GOX system and through the plant rejuvenation and material upgrade works, the hazards were mitigated to a lower risk within the risk matrix. The implementation and upgrade works had served to add more barriers to the left side of the bow tie as well as ensuring that the aged complex is well equipped with needed safeguarding strategies (from inherent safer design, passive & active safeguarding and procedural controls) to avoid the occurrence of potential oxygen fire or explosion incident.
    Matched MeSH terms: Computers
  20. Fulltext Energy-Efficient and Variability-Resilient 11T SRAM Design Using Data-Aware Read-Write Assist (DARWA) Technique for Low-Power Applications
    Thirugnanam S, Soong LW, Prabhu CM, Singh AK
    Sensors (Basel), 2023 May 26;23(11).
    PMID: 37299822 DOI: 10.3390/s23115095
    The need for power-efficient devices, such as smart sensor nodes, mobile devices, and portable digital gadgets, is markedly increasing and these devices are becoming commonly used in daily life. These devices continue to demand an energy-efficient cache memory designed on Static Random-Access Memory (SRAM) with enhanced speed, performance, and stability to perform on-chip data processing and faster computations. This paper presents an energy-efficient and variability-resilient 11T (E2VR11T) SRAM cell, which is designed with a novel Data-Aware Read-Write Assist (DARWA) technique. The E2VR11T cell comprises 11 transistors and operates with single-ended read and dynamic differential write circuits. The simulated results in a 45 nm CMOS technology exhibit 71.63% and 58.77% lower read energy than ST9T and LP10T and lower write energies of 28.25% and 51.79% against S8T and LP10T cells, respectively. The leakage power is reduced by 56.32% and 40.90% compared to ST9T and LP10T cells. The read static noise margin (RSNM) is improved by 1.94× and 0.18×, while the write noise margin (WNM) is improved by 19.57% and 8.70% against C6T and S8T cells. The variability investigation using the Monte Carlo simulation on 5000 samples highly validates the robustness and variability resilience of the proposed cell. The improved overall performance of the proposed E2VR11T cell makes it suitable for low-power applications.
    Matched MeSH terms: Computers, Handheld*
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links