Displaying publications 1 - 20 of 84 in total

Abstract:
Sort:
  1. Khairuddin Sulaiman, Norhayati Mahyuddin
    MyJurnal
    The construction industry is an important industry in the Malaysian’s economy. Much has been said about the quality of the product as well as the image of the industry due to the small percentage of local workers on site. The industry’s welfare and safety record is not at all encouraging. To stop the rot, the government has taken important and significant steps by the establishment of the Malaysian Construction Industry Development Board (CIDB) and the National Institute of Occupational Safety and Health (NIOSH). These efforts have shown some significant positive improvement in the perception and action of those involved in the industry but we are still far from the standard shown in other developed countries in terms of site safety. This paper is to discuss the roles and responsibilities of the key players in the industry be it the clients, consultants or contractors. The focus is on the ‘upstream’ activities i.e. the pre-construction stage, rather than the ‘downstream’ i.e. the construction phase of a project.
    Matched MeSH terms: Construction Industry
  2. Noorzaei, J., Wong, J.N., Thanoon, W.A., Jaafar, M.S.
    MyJurnal
    Precast concrete technology forms an important part in the drive towards a full implementation of the Industrialized Building System (IBS). The IBS requires building components and their dimensions to be standardized, and preferably cast off site. Slabs are major structural elements in buildings, other than beams and columns. Standardized and optimized slabs can significantly enhance the building industries in achieving the full implementation of the IBS. Nevertheless, this requires computer techniques to achieve standardized and optimized slabs which can satisfy all building design requirements, including the standards of architectural and structural design standards. This study proposed a computer technique which analysed and designed five different types of slabs which will satisfy all the requirements in design. The most commonly used slabs included in this study were the solid one way, solid two way, ribbed, voided and composite slabs. The computer techniques enable the design of the most optimized sections for any of the slab types under any loading and span conditions. The computer technique also provides details for the reinforcements required for the slabs.
    Matched MeSH terms: Construction Industry
  3. Abd Rahman MN, Abdul Rani MR, Rohani JM
    J Hum Ergol (Tokyo), 2011 Dec;40(1-2):19-36.
    PMID: 25665205 DOI: 10.11183/jhe.40.19
    This paper describes the development of the Workplace Ergonomic Risk Assessment (WERA) for investigating the physical risk factor associated with work-related musculoskeletal disorders (WMSDs). The initial development of WERA tool involved the following procedures: (1) first stage, development of WERA prototype from literature review, (2) second stage, evaluation of the psychometric properties including (a) validity trials and (b) reliability and usability trials. In the validity trials, the relationship of the individual WERA body part scores to the development of pain or discomfort is statistically significant for the wrist, shoulder and back regions. It shows that the WERA assessment provided a good indication of work-related musculoskeletal disorders which might be reported as pain, ache or discomfort in the relevant body regions. In the reliability trials, the results of inter-observer reliability shows that moderate agreement among the observers while from the feedback questionnaire survey about the usability of WERA tool, all participants including expert and management teams agreed that the prototype of WERA tool was easy and quick to use, applicable to workplace assessment for the wide range of job/task and valuable at work. It was confirmed that there was no need of training required to do WERA assessment. Therefore, the WERA assessment has been designed for easy and quick use, and for those who are trained to use it do not need previous skills in observation techniques although this would be an advantage. As WERA is a pen and paper technique that can be used without any special equipment, WERA assessment can be done in any space of workplaces without disruption to the task that have been observed.
    Matched MeSH terms: Construction Industry
  4. Rahman MN, Rani MR, Rohani JM
    Work, 2012;43(4):507-14.
    PMID: 22927603 DOI: 10.3233/WOR-2012-1404
    The aim of this study was to investigate the work-related musculoskeletal disorders (WMSDs) among workers in wall plastering jobs within the construction industry.
    Matched MeSH terms: Construction Industry*
  5. Isa Halim, Rohana Abdullah, Ahmad Rasdan Ismail
    MyJurnal
    Work-related Musculoskeletal Disorders (WMSDs) are common occupational injuries among workers in the construction industry. Epidemiological studies indicated that WMSDs include neck pain, lower back pain, knee pain, leg fatigue as well as ankle and feet discomfort. The objectives of this study are to identify the WMSDs experienced by the workers during construction works and discuss the causes of those WMSDs. Subjective approach associated with modified Nordic Musculoskeletal Questionnaire (NMQ) was applied to identify the symptoms of WMSDs. A case study was conducted in several construction sites situated at the southern region of Peninsular Malaysia. During the study, 37 construction workers with different age and scope of works were interviewed to determine the WMSDs that they have experienced. Based on distributed questionnaire, almost all workers experienced pain in the region of lower back, upper back and biceps. These pains were contributed by manipulation of heavy load and high force exertion. Based on discussed causations, control measures via engineering controls method and administrative controls method were proposed to alleviate the risk of WMSDs among construction workers.
    Matched MeSH terms: Construction Industry
  6. Abas AB, Mohd Said DA, Aziz Mohammed MA, Sathiakumar N
    Am. J. Ind. Med., 2013 Jan;56(1):65-76.
    PMID: 22544443 DOI: 10.1002/ajim.22056
    BACKGROUND: In Malaysia, surveillance of fatal occupational injuries is fragmented. We therefore analyzed an alternative data source from Malaysia's Social Security organization, the Pertubuhan Keselamatan Sosial (PERKESO).
    METHODS: We conducted a secondary data analysis of the PERKESO database comprised of 7 million employees from 2002 to 2006.
    RESULTS: Overall, the average annual incidence was 9.2 fatal occupational injuries per 100,000 workers. During the 5-year period, there was a decrease in the absolute number of fatal injuries by 16% and the incidence by 34%. The transportation sector reported the highest incidence of fatal injuries (35.1/100,000), followed by agriculture (30.5/100,000) and construction (19.3/100,000) sectors. Persons of Indian ethnicity were more likely to sustain fatal injuries compared to other ethnic groups.
    CONCLUSIONS: Government and industry should develop rigorous strategies to detect hazards in the workplace, especially in sectors that continuously record high injury rates. Targeted interventions emphasizing worker empowerment coupled with systematic monitoring and evaluation is critical to ensure success in prevention and control measures.
    Matched MeSH terms: Construction Industry/statistics & numerical data*
  7. Balakrishnan K, Olutoye MA, Hameed BH
    Bioresour Technol, 2013 Jan;128:788-91.
    PMID: 23186664 DOI: 10.1016/j.biortech.2012.10.023
    The current research investigates synthesis of methyl esters by transesterification of waste cooking oil in a heterogeneous system, using barium meliorated construction site waste marble as solid base catalyst. The pretreated catalyst was calcined at 830 °C for 4h prior to its activity test to obtained solid oxide characterized by scanning electron microscopy/energy dispersive spectroscopy, BET surface area and pore size measurement. It was found that the as prepared catalyst has large pores which contributed to its high activity in transesterification reaction. The methyl ester yield of 88% was obtained when the methanol/oil molar ratio was 9:1, reaction temperature at 65 °C, reaction time 3h and catalyst/oil mass ratio of 3.0 wt.%. The catalyst can be reused over three cycles, offer low operating conditions, reduce energy consumption and waste generation in the production of biodiesel.
    Matched MeSH terms: Construction Industry
  8. Su AT, Maeda S, Fukumoto J, Darus A, Hoe VC, Miyai N, et al.
    Occup Environ Med, 2013 Jul;70(7):498-504.
    PMID: 23645621 DOI: 10.1136/oemed-2012-101321
    The dose-response relationship for hand-transmitted vibration has been investigated extensively in temperate environments. Since the clinical features of hand-arm vibration syndrome (HAVS) differ between the temperate and tropical environment, we conducted this study to investigate the dose-response relationship of HAVS in a tropical environment.
    Matched MeSH terms: Construction Industry/instrumentation
  9. Su AT, Fukumoto J, Darus A, Hoe VC, Miyai N, Isahak M, et al.
    J Occup Health, 2013;55(6):468-78.
    PMID: 24162147
    OBJECTIVES: The aim of this study was to investigate the clinical characteristics of HAVS in a tropical environment in comparison with a temperate environment.

    METHODS: We conducted a series medical examinations among the forestry, construction and automobile industry workers in Malaysia adopting the compulsory medical examination procedure used by Wakayama Medical University for Japanese vibratory tools workers. We matched the duration of vibration exposure and compared our results against the Japanese workers. We also compared the results of the Malaysian tree fellers against a group of symptomatic Japanese tree fellers diagnosed with HAVS.

    RESULTS: Malaysian subjects reported a similar prevalence of finger tingling, numbness and dullness (Malaysian=25.0%, Japanese=21.5%, p=0.444) but had a lower finger skin temperature (FST) and higher vibrotactile perception threshold (VPT) values as compared with the Japanese workers. No white finger was reported in Malaysian subjects. The FST and VPT of the Malaysian tree fellers were at least as bad as the Japanese tree fellers despite a shorter duration (mean difference=20.12 years, 95%CI=14.50, 25.40) of vibration exposure.

    CONCLUSIONS: Although the vascular disorder does not manifest clinically in the tropical environment, the severity of HAVS can be as bad as in the temperate environment with predominantly neurological disorder. Hence, it is essential to formulate national legislation for the control of the occupational vibration exposure.

    Matched MeSH terms: Construction Industry
  10. Lian, Oh Chai, Wee, Lee Siong, Mohd Asha’ari Masrom, Hua, Goh Ching
    MyJurnal
    Recently, there has been great interest on the applicability of Recycled Concrete Aggregate (RCA) as a new ecological construction material that can be sustainable in a gradually expanding construction industry. This paper reports the structural performance particularly on shear behaviour of high strength reinforced recycled concrete beams. Compressive cube strength of the tested beams ranged from 65-74 MPa at the age of 28-days. The experimental program compared conventional concrete mix with concrete mix having substitution of 25% recycled concrete aggregates of grade 25-30 MPa. In this study, three 150 mm x 200 mm x 1200 mm simply supported rectangular concrete beams in each mix were tested under a four-point bending static load with various shear span to effective depth ratios (a/d = 1.0, 1.5, 2.0). Subsequently, the shear behavior of the beams was investigated through studies of load-deflection responses, effect of a/d ratios and crack patterns. The test results reported that the substitution of 25% recycled concrete coarse aggregates barely affects the shear capacity of the high strength reinforced concrete beams with a/d of 1.5 onwards. Finally, experimental results were compared using existing design codes by ACI 318, Eurocode-2 and AS3600 which lie on the safe side.
    Matched MeSH terms: Construction Industry
  11. M.N.N. Husna, R.M.R. Ahmad, R.E. Intan, C.H. Asmawati
    ASM Science Journal, 2013;7(1):59-66.
    MyJurnal
    Throughout the years, the construction industry has made an important contribution to the Malaysian economy. Moreover, the Ninth Malaysia Plan (2006–2010) has also played a significant role in the demands of executing major residential housing project developments where it has been observed that construction waste was one of the priority waste streams. Due to the increasing number in the population that is actively involved in economic activities, and the modernization of the country, the types of construction waste that are being produced, and identifying the source such as waste are becoming more complex. Therefore, appropriate actions and approaches are needed to be taken with respect to its effective management in handling the solid waste from construction sites. This paper is intended to review the issues and the challenges enclosed within the supply chain management mechanisms in order for improving construction waste management. Throughout this review, useful information and better understanding concerning the current issues, challenges and the supply chain management mechanisms would be made inclusive in the field to be explored. The findings would also assist in improving the quality and awareness on the construction waste management that is being practiced.
    Matched MeSH terms: Construction Industry
  12. Chong HY, Low TS
    Int J Occup Saf Ergon, 2014;20(3):503-13.
    PMID: 25189753
    Safety and health issues remain critical to the construction industry due to its working environment and the complexity of working practises. This research attempts to adopt 2 research approaches using statistical data and court cases to address and identify the causes and behavior underlying construction safety and health issues in Malaysia. Factual data on the period of 2000-2009 were retrieved to identify the causes and agents that contributed to health issues. Moreover, court cases were tabulated and analyzed to identify legal patterns of parties involved in construction site accidents. Approaches of this research produced consistent results and highlighted a significant reduction in the rate of accidents per construction project in Malaysia.
    Matched MeSH terms: Construction Industry/legislation & jurisprudence*; Construction Industry/statistics & numerical data*
  13. Aggelis DG, Alver N, Chai HK
    ScientificWorldJournal, 2014;2014:435238.
    PMID: 24701167 DOI: 10.1155/2014/435238
    Matched MeSH terms: Construction Industry/standards*; Construction Industry/trends
  14. Leong TK, Zakuan N, Mat Saman MZ, Ariff MS, Tan CS
    ScientificWorldJournal, 2014;2014:591361.
    PMID: 24701182 DOI: 10.1155/2014/591361
    This paper proposed seven existing and new performance indicators to measure the effectiveness of quality management system (QMS) maintenance and practices in construction industry. This research is carried out with a questionnaire based on QMS variables which are extracted from literature review and project performance indicators which are established from project management's theory. Data collected was analyzed using correlation and regression analysis. The findings indicate that client satisfaction and time variance have positive and significant relationship with QMS while other project performance indicators do not show significant results. Further studies can use the same project performance indicators to study the effectiveness of QMS in different sampling area to improve the generalizability of the findings.
    Matched MeSH terms: Construction Industry*
  15. Ibrahim MR, Katman HY, Karim MR, Koting S, Mashaan NS
    ScientificWorldJournal, 2014;2014:240786.
    PMID: 24574875 DOI: 10.1155/2014/240786
    The main objective of this paper is to investigate the relations of rubber size, rubber content, and binder content in determination of optimum binder content for open graded friction course (OGFC). Mix gradation type B as specified in Specification for Porous Asphalt produced by the Road Engineering Association of Malaysia (REAM) was used in this study. Marshall specimens were prepared with four different sizes of rubber, namely, 20 mesh size [0.841 mm], 40 mesh [0.42 mm], 80 mesh [0.177 mm], and 100 mesh [0.149 mm] with different concentrations of rubberised bitumen (4%, 8%, and 12%) and different percentages of binder content (4%-7%). The appropriate optimum binder content is then selected according to the results of the air voids, binder draindown, and abrasion loss test. Test results found that crumb rubber particle size can affect the optimum binder content for OGFC.
    Matched MeSH terms: Construction Industry/methods*
  16. Memon AH, Rahman IA
    ScientificWorldJournal, 2014;2014:165158.
    PMID: 24693227 DOI: 10.1155/2014/165158
    This study uncovered inhibiting factors to cost performance in large construction projects of Malaysia. Questionnaire survey was conducted among clients and consultants involved in large construction projects. In the questionnaire, a total of 35 inhibiting factors grouped in 7 categories were presented to the respondents for rating significant level of each factor. A total of 300 questionnaire forms were distributed. Only 144 completed sets were received and analysed using advanced multivariate statistical software of Structural Equation Modelling (SmartPLS v2). The analysis involved three iteration processes where several of the factors were deleted in order to make the model acceptable. The result of the analysis found that R(2) value of the model is 0.422 which indicates that the developed model has a substantial impact on cost performance. Based on the final form of the model, contractor's site management category is the most prominent in exhibiting effect on cost performance of large construction projects. This finding is validated using advanced techniques of power analysis. This vigorous multivariate analysis has explicitly found the significant category which consists of several causative factors to poor cost performance in large construction projects. This will benefit all parties involved in construction projects for controlling cost overrun.
    Matched MeSH terms: Construction Industry/economics*; Construction Industry/statistics & numerical data*
  17. Kanadasan J, Fauzi AFA, Razak HA, Selliah P, Subramaniam V, Yusoff S
    Materials (Basel), 2015 Sep 22;8(9):6508-6530.
    PMID: 28793579 DOI: 10.3390/ma8095319
    The agricultural industry in Malaysia has grown rapidly over the years. Palm oil clinker (POC) is a byproduct obtained from the palm oil industry. Its lightweight properties allows for its utilization as an aggregate, while in powder form as a filler material in concrete. POC specimens obtained throughout each state in Malaysia were investigated to evaluate the physical, chemical, and microstructure characteristics. Variations between each state were determined and their possible contributory factors were assessed. POC were incorporated as a replacement material for aggregates and their engineering characteristics were ascertained. Almost 7% of density was reduced with the introduction of POC as aggregates. A sustainability assessment was made through greenhouse gas emission (GHG) and cost factor analyses to determine the contribution of the addition of POC to the construction industry. Addition of POC helps to lower the GHG emission by 9.6% compared to control specimens. By channeling this waste into the construction industry, an efficient waste-management system can be promoted; thus, creating a cleaner environment. This study is also expected to offer some guides and directions for upcoming research works on the incorporation of POC.
    Matched MeSH terms: Construction Industry
  18. Kanadasan J, Abdul Razak H
    Materials (Basel), 2015 Dec 16;8(12):8817-8838.
    PMID: 28793748 DOI: 10.3390/ma8125494
    The utilization of waste materials from the palm oil industry provides immense benefit to various sectors of the construction industry. Palm oil clinker is a by-product from the processing stages of palm oil goods. Channelling this waste material into the building industry helps to promote sustainability besides overcoming waste disposal problems. Environmental pollution due to inappropriate waste management system can also be drastically reduced. In this study, cement was substituted with palm oil clinker powder as a binder material in self-compacting mortar. The fresh, hardened and microstructure properties were evaluated throughout this study. In addition, sustainability component analysis was also carried out to assess the environmental impact of introducing palm oil clinker powder as a replacement material for cement. It can be inferred that approximately 3.3% of cement production can be saved by substituting palm oil clinker powder with cement. Reducing the utilization of cement through a high substitution level of this waste material will also help to reduce carbon emissions by 52%. A cleaner environment free from pollutants can be created to ensure healthier living. Certain industries may benefit through the inclusion of this waste material as the cost and energy consumption of the product can be minimized.
    Matched MeSH terms: Construction Industry
  19. Grismer LL, Wood PL, Anuar S, Davis HR, Cobos AJ, Murdoch ML
    Zootaxa, 2016 Jan 04;4061(1):1-17.
    PMID: 27395475 DOI: 10.11646/zootaxa.4061.1.1
    A new species of Bent-toed Gecko, Cyrtodactylus gunungsenyumensis sp. nov. of the sworderi complex, is described from Hutan Lipur Gunung Senyum, Pahang, Peninsular Malaysia and is differentiated from all other species in the sworderi complex by having a unique combination of characters including a maximum SVL of 74.7 mm; low, rounded, weakly keeled, body tubercles; 34-40 paravertebral tubercles; weak ventrolateral body fold lacking tubercles; 38-41 ventral scales; an abrupt transition between the posterior and ventral femoral scales; 20-23 subdigital lamellae on the fourth toe; enlarged femoral scales; no femoral or precloacal pores; no precloacal groove; wide caudal bands; and an evenly banded dorsal pattern. Cyrtodactylus gunungsenyumensis sp. nov. is a scansorial, karst forest-adapted specialist endemic to the karst ecosystem surrounding Gunung Senyum and occurs on the vertical walls of the limestone towers as well as the branches, trunks, and leaves of the vegetation in the associated karst forest. Cyrtodactylus gunungsenyumensis sp. nov. is the seventh species of karst forest-adapted Cyrtodactylus and the sixteenth endemic species of karst ecosystem reptile discovered in Peninsular Malaysia in the last seven years from only 12 different karst forests. This is a clear indication that many species remain to be discovered in the approximately 558 isolated karst ecosystems in Peninsular Malaysia not yet surveyed. These data continue to underscore the importance of karst ecosystems as reservoirs of biodiversity and microendemism and that they constitute an important component of Peninsular Malaysia's natural heritage and should be protected from the quarrying interests of foreign industrial companies.
    Matched MeSH terms: Construction Industry
  20. Mah CM, Fujiwara T, Ho CS
    Waste Manag Res, 2016 Dec;34(12):1224-1230.
    PMID: 27637272
    Construction and demolition waste continues to sharply increase in step with the economic growth of less developed countries. Though the construction industry is large, it is composed of small firms with individual waste management practices, often leading to the deleterious environmental outcomes. Quantifying construction and demolition waste generation allows policy makers and stakeholders to understand the true internal and external costs of construction, providing a necessary foundation for waste management planning that may overcome deleterious environmental outcomes and may be both economically and environmentally optimal. This study offers a theoretical method for estimating the construction and demolition project waste generation rate by utilising available data, including waste disposal truck size and number, and waste volume and composition. This method is proposed as a less burdensome and more broadly applicable alternative, in contrast to waste estimation by on-site hand sorting and weighing. The developed method is applied to 11 projects across Malaysia as the case study. This study quantifies waste generation rate and illustrates the construction method in influencing the waste generation rate, estimating that the conventional construction method has a waste generation rate of 9.88 t 100 m(-2), the mixed-construction method has a waste generation rate of 3.29 t 100 m(-2), and demolition projects have a waste generation rate of 104.28 t 100 m(-2).
    Matched MeSH terms: Construction Industry/methods*; Construction Industry/statistics & numerical data*
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links