Displaying publications 1 - 20 of 104 in total

Abstract:
Sort:
  1. Osman R, Saim N, Juahir H, Abdullah MP
    Environ Monit Assess, 2012 Jan;184(2):1001-14.
    PMID: 21494831 DOI: 10.1007/s10661-011-2016-8
    Increasing urbanization and changes in land use in Langat river basin lead to adverse impacts on the environment compartment. One of the major challenges is in identifying sources of organic contaminants. This study presented the application of selected chemometric techniques: cluster analysis (CA), discriminant analysis (DA), and principal component analysis (PCA) to classify the pollution sources in Langat river basin based on the analysis of water and sediment samples collected from 24 stations, monitored for 14 organic contaminants from polycyclic aromatic hydrocarbons (PAHs), sterols, and pesticides groups. The CA and DA enabled to group 24 monitoring sites into three groups of pollution source (industry and urban socioeconomic, agricultural activity, and urban/domestic sewage) with five major discriminating variables: naphthalene, pyrene, benzo[a]pyrene, coprostanol, and cholesterol. PCA analysis, applied to water data sets, resulted in four latent factors explaining 79.0% of the total variance while sediment samples gave five latent factors with 77.6% explained variance. The varifactors (VFs) obtained from PCA indicated that sterols (coprostanol, cholesterol, stigmasterol, β-sitosterol, and stigmastanol) are strongly correlated to domestic and urban sewage, PAHs (naphthalene, acenaphthene, pyrene, benzo[a]anthracene, and benzo[a]pyrene) from industrial and urban activities and chlorpyrifos correlated to samples nearby agricultural sites. The results demonstrated that chemometric techniques can be used for rapid assessment of water and sediment contaminations.
    Matched MeSH terms: Discriminant Analysis
  2. Sarpeshkar V, Mann DL, Spratford W, Abernethy B
    Hum Mov Sci, 2017 Aug;54:82-100.
    PMID: 28410536 DOI: 10.1016/j.humov.2017.04.003
    Successful interception relies on the use of perceptual information to accurately guide an efficient movement strategy that allows performers to be placed at the right place at the right time. Although previous studies have highlighted the differences in the timing and coordination of movement that underpin interceptive expertise, very little is known about how these movement patterns are adapted when intercepting targets that follow a curvilinear flight-path. The aim of this study was to examine how curvilinear ball-trajectories influence movement patterns when intercepting a fast-moving target. Movement timing and coordination was examined when four groups of cricket batters, who differed in their skill level and/or age, hit targets that followed straight or curvilinear flight-paths. The results revealed that when compared to hitting straight trials, (i) mixing straight with curvilinear trials altered movement coordination and when the ball was hit, (ii) curvilinear trajectories reduced interceptive performance and significantly delayed the timing of all kinematic moments, but there were (iii) larger decrease in performance when the ball swung away from (rather than in towards) the performer. Movement coordination differed between skill but not age groups, suggesting that skill-appropriate movement patterns that are apparent in adults may have fully emerged by late adolescence.
    Matched MeSH terms: Discriminant Analysis
  3. Noor NM, Rijal OM, Yunus A, Abu-Bakar SA
    Comput Med Imaging Graph, 2010 Mar;34(2):160-6.
    PMID: 19758785 DOI: 10.1016/j.compmedimag.2009.08.005
    This paper presents a statistical method for the detection of lobar pneumonia when using digitized chest X-ray films. Each region of interest was represented by a vector of wavelet texture measures which is then multiplied by the orthogonal matrix Q(2). The first two elements of the transformed vectors were shown to have a bivariate normal distribution. Misclassification probabilities were estimated using probability ellipsoids and discriminant functions. The result of this study recommends the detection of pneumonia by constructing probability ellipsoids or discriminant function using maximum energy and maximum column sum energy texture measures where misclassification probabilities were less than 0.15.
    Matched MeSH terms: Discriminant Analysis
  4. Hasan MK, Ghazal TM, Alkhalifah A, Abu Bakar KA, Omidvar A, Nafi NS, et al.
    Front Public Health, 2021;9:737149.
    PMID: 34712639 DOI: 10.3389/fpubh.2021.737149
    The internet of reality or augmented reality has been considered a breakthrough and an outstanding critical mutation with an emphasis on data mining leading to dismantling of some of its assumptions among several of its stakeholders. In this work, we study the pillars of these technologies connected to web usage as the Internet of things (IoT) system's healthcare infrastructure. We used several data mining techniques to evaluate the online advertisement data set, which can be categorized as high dimensional with 1,553 attributes, and the imbalanced data set, which automatically simulates an IoT discrimination problem. The proposed methodology applies Fischer linear discrimination analysis (FLDA) and quadratic discrimination analysis (QDA) within random projection (RP) filters to compare our runtime and accuracy with support vector machine (SVM), K-nearest neighbor (KNN), and Multilayer perceptron (MLP) in IoT-based systems. Finally, the impact on number of projections was practically experimented, and the sensitivity of both FLDA and QDA with regard to precision and runtime was found to be challenging. The modeling results show not only improved accuracy, but also runtime improvements. When compared with SVM, KNN, and MLP in QDA and FLDA, runtime shortens by 20 times in our chosen data set simulated for a healthcare framework. The RP filtering in the preprocessing stage of the attribute selection, fulfilling the model's runtime, is a standpoint in the IoT industry. Index Terms: Data Mining, Random Projection, Fischer Linear Discriminant Analysis, Online Advertisement Dataset, Quadratic Discriminant Analysis, Feature Selection, Internet of Things.
    Matched MeSH terms: Discriminant Analysis
  5. Aminu M, Ahmad NA
    ACS Omega, 2020 Oct 20;5(41):26601-26610.
    PMID: 33110988 DOI: 10.1021/acsomega.0c03362
    Partial least squares discriminant analysis (PLS-DA) is a well-known technique for feature extraction and discriminant analysis in chemometrics. Despite its popularity, it has been observed that PLS-DA does not automatically lead to extraction of relevant features. Feature learning and extraction depends on how well the discriminant subspace is captured. In this paper, discriminant subspace learning of chemical data is discussed from the perspective of PLS-DA and a recent extension of PLS-DA, which is known as the locality preserving partial least squares discriminant analysis (LPPLS-DA). The objective is twofold: (a) to introduce the LPPLS-DA algorithm to the chemometrics community and (b) to demonstrate the superior discrimination capabilities of LPPLS-DA and how it can be a powerful alternative to PLS-DA. Four chemical data sets are used: three spectroscopic data sets and one that contains compositional data. Comparative performances are measured based on discrimination and classification of these data sets. To compare the classification performances, the data samples are projected onto the PLS-DA and LPPLS-DA subspaces, and classification of the projected samples into one of the different groups (classes) is done using the nearest-neighbor classifier. We also compare the two techniques in data visualization (discrimination) task. The ability of LPPLS-DA to group samples from the same class while at the same time maximizing the between-class separation is clearly shown in our results. In comparison with PLS-DA, separation of data in the projected LPPLS-DA subspace is more well defined.
    Matched MeSH terms: Discriminant Analysis
  6. Siti Waznah Abdurahman, Mohd Azmi Ambak, Shahreza Md Sheriff, Ying GS, Ahmad Azfar Mohamed, Ahmed Jalal Khan Chowdhury
    Sains Malaysiana, 2016;45:1-7.
    Ariid catfishes, belong to family Ariidae is considered as one of the taxonomically problematic groups, which is still under review by fish taxonomist globally. Species level identification of some ariids often resulted in species misidentification because of their complex characters and very similar morphological characters within genera. A vigilant and detail observation is very important during the species level identification of ariid species. In these contexts, this study was carried out in order to determine the morphological variations of one of the ariid genera, Plicofollis, which have been giving misleading taxonomic information in the south-east Asian countries. A Truss network technique was used throughout the study period. The study was conducted based on 20 truss measurements using 22 to 23 specimens per species, namely P. argyropleuron, P. nella and P. tenuispinis found in Peninsular Malaysian waters. Morphological variations were determined using a multivariate technique of discriminant function analysis (DFA). The results obtained in this study showed that discriminant analysis using truss network measurements has produced very clear separations of all the species in Plicofollis group. Several important morphological characters have been identified, which represent body depth and caudal regions of the fish. The documentary evidences of these variables could be considered as the constructive functional features, which could enable us to assess more accurately to distinguish the species within this complex Ariidae family.
    Matched MeSH terms: Discriminant Analysis
  7. Al-Quraishi MS, Ishak AJ, Ahmad SA, Hasan MK, Al-Qurishi M, Ghapanchizadeh H, et al.
    Med Biol Eng Comput, 2017 May;55(5):747-758.
    PMID: 27484411 DOI: 10.1007/s11517-016-1551-4
    Electromyography (EMG)-based control is the core of prostheses, orthoses, and other rehabilitation devices in recent research. Nonetheless, EMG is difficult to use as a control signal given the complex nature of the signal. To overcome this problem, the researchers employed a pattern recognition technique. EMG pattern recognition mainly involves four stages: signal detection, preprocessing feature extraction, dimensionality reduction, and classification. In particular, the success of any pattern recognition technique depends on the feature extraction stage. In this study, a modified time-domain features set and logarithmic transferred time-domain features (LTD) were evaluated and compared with other traditional time-domain features set (TTD). Three classifiers were employed to assess the two feature sets, namely linear discriminant analysis (LDA), k nearest neighborhood, and Naïve Bayes. Results indicated the superiority of the new time-domain feature set LTD, on conventional time-domain features TTD with the average classification accuracy of 97.23 %. In addition, the LDA classifier outperformed the other two classifiers considered in this study.
    Matched MeSH terms: Discriminant Analysis
  8. Ang KH
    Sains Malaysiana, 2018;47:471-479.
    In recent years, Malaysia has experienced quite a few number of chronic air pollution problems and it has become a
    major contributor to the deterioration of human health and ecosystems. This study aimed to assess the air quality data
    and identify the pattern of air pollution sources using chemometric analysis through hierarchical cluster analysis (HCA),
    discriminant analysis (DA), principal component analysis (PCA) and multiple linear regression analysis (MLR). The air
    quality data from January 2016 until December 2016 was obtained from the Department of Environment Malaysia. Air
    quality data from eight sampling stations in Selangor include the selected variables of nitrogen dioxide (NO2
    ), ozone (O3
    ),
    sulfur dioxide (SO2
    ), carbon monoxide (CO) and particulate matter (PM10). The HCA resulted in three clusters, namely low
    pollution source (LPS), moderate pollution source (MPS) and slightly high pollution source (SHPS). Meanwhile, DA resulted
    in two and four variables for the forward stepwise mode and the backward stepwise mode, respectively. Through PCA,
    it was identified that the main pollutants of LPS, MPS and SHPS came from industrial and vehicle emissions, agricultural
    systems, residential factors and natural emission sources. Among the three models yielded from the MLR analysis, it was
    found that SHPS is the most suitable model to be used for the prediction of Air Pollution Index. This study concluded that
    a clearer review and practical design of air quality monitoring network would be beneficial for better management of
    air pollution. The study also suggested that chemometric techniques have the ability to show significant information on
    spatial variability for large and complex air quality data.
    Matched MeSH terms: Discriminant Analysis
  9. Mustapha A, Aris AZ
    PMID: 22571534 DOI: 10.1080/10934529.2012.673305
    Multivariate statistical techniques such as hierarchical Agglomerated cluster analysis (HACA), discriminant analysis (DA), principal component analysis (PCA), and factor analysis (FA) were applied to identify the spatial variation and pollution sources of Jakara River, Kano, Nigeria. Thirty surface water samples were collected: 23 along Getsi River and 7 along the main channel of River Jakara. Twenty-three water quality parameters, namely pH, temperature, turbidity, electrical conductivity (EC), dissolved oxygen (DO), 5-day biochemical oxygen demand (BOD(5)), Faecal coliform, total solids (TS), nitrates (NO(3)(-)), phosphates (PO(4)(3-)), cobalt (Co), iron (Fe), nickel (Ni), manganese (Mn), copper (Cu), sodium (Na), potassium (K), mercury (Hg), chromium (Cr), cadmium (Cd), lead (Pb), magnesium (Mg), and calcium(Ca) were analysed. HACA grouped the sampling points into three clusters based on the similarities of river water quality characteristics: industrial, domestic, and agricultural water pollution sources. Forward and backward DA effectively discriminated 5 and 15 water quality variables, respectively, each assigned with 100% correctness from the original 23 variables. PCA and FA were used to investigate the origin of each water quality parameter due to various land use activities, 7 principal components were obtained with 77.5% total variance, and in addition PCA identified 3 latent pollution sources to support HACA. From this study, one can conclude that the application of multivariate techniques derives meaningful information from water quality data.
    Matched MeSH terms: Discriminant Analysis
  10. Muhammad Abu Bakar Siddik, Md. Reaz Chaklader, Ashfaqun Nahar
    Sains Malaysiana, 2015;44:1241-1248.
    The study was aimed to determine the variation in taxonomic diversity of Polynemus paradiseus based on morphometric and meristic analyses of samples collected from three coastal rivers of Bangladesh (Payra, Tentulia and Kirtonkhola). A total of 105 individuals ranging at 10-20 cm in total length (TL) and 7.91-60.64 g in body weight (BW) were sampled using Been nets and Kachal and Veshal nets. Significant differences were observed in 24 out of 25 morphometric measurements and 6 out of 10 meristic counts among the populations. In morphometric measurements, the first discriminant function (DF1) was accounted for 78.6% and the second discriminant function (DF2) was accounted for 21.4% of among groups variability, explaining 100% of total among group variability. A dendrogram based on morphometric data showed that the Tentulia and Kirtankhola populations showed high degree of overlapping and these two populations were highly different from Payra river population. The canonical graph also showed that the populations of Tentulia and Kirtankhola rivers were more closely related comparing with Payra river population for isometric condition. These findings may provide useful information for the conservation and sustainable management of this important fish.
    Matched MeSH terms: Discriminant Analysis
  11. Abbas, F.M.A., Saifullah, R., Azhar, M.E.
    MyJurnal
    Physical properties of ripe banana flour were studied in Cavendish and Dream banana, in order to distinguish the two varieties. Flour was analyzed for pH, total soluble solids (TSS), water holding capacity
    (WHC) and oil holding capacity (OHC) at 40, 60 and 80 °C, color values L*, a* and b*, back extrusion force
    and viscosity. Physical properties data were analyzed by cluster analysis (CA) and discriminant analysis (DA). CA showed that the two types of flour were different in terms of selected physical properties. DA indicated that WHC at 60 °C was the main contributor in discriminating the two types of flour.
    Matched MeSH terms: Discriminant Analysis
  12. Abbas, F.M.A., Foroogh, B., Liong, M.T., Azhar, M.E.
    MyJurnal
    Four types of soft dates (SD), three types of semi-dried dates (SDD) and one type of dried dates (DD) were used in this study. The antioxidant activities were assessed using TEAC method (ABTS assay) and the ferric reducing/antioxidant power method (FRAP assay), while total phenolic content (TPC) and total flavonoid content (TFC) were measured using Folin-Ciocalteau and aluminum chloride colorimetric methods. Multivariate analysis of variance (MANOVA), discriminant analysis (DA) and principal component analysis (PCA) were used to analyze the data. MANOVA showed a strong significant difference between the eight types of dates. DA identified the relative contribution of each parameter in distinguishing the dates. DA also identified two functions responsible for discriminating the dates and showed the difference between different types of dates. The first function distinguished DD from other types of dates, whilst the second function discriminated SD and SDD, affording 100% correct assignation. PCA identified only one component responsible for explaining 98.85% of the total variance in antioxidant data. It is suggested that the TEAC method and the quantitative determination of TPC and TFC was suitable for differentiation of dates and quality control.
    Matched MeSH terms: Discriminant Analysis
  13. Ahmad R, Lim CK, Marzuki NF, Goh YK, Azizan KA, Goh YK, et al.
    Molecules, 2020 Dec 16;25(24).
    PMID: 33339375 DOI: 10.3390/molecules25245965
    In solving the issue of basal stem rot diseases caused by Ganoderma, an investigation of Scytalidium parasiticum as a biological control agent that suppresses Ganoderma infection has gained our interest, as it is more environmentally friendly. Recently, the fungal co-cultivation has emerged as a promising method to discover novel antimicrobial metabolites. In this study, an established technique of co-culturing Scytalidium parasiticum and Ganoderma boninense was applied to produce and induce metabolites that have antifungal activity against G. boninense. The crude extract from the co-culture media was applied to a High Performance Liquid Chromatography (HPLC) preparative column to isolate the bioactive compounds, which were tested against G. boninense. The fractions that showed inhibition against G. boninense were sent for a Liquid Chromatography-Time of Flight-Mass Spectrometry (LC-TOF-MS) analysis to further identify the compounds that were responsible for the microbicidal activity. Interestingly, we found that eudistomin I, naringenin 7-O-beta-D-glucoside and penipanoid A, which were present in different abundances in all the active fractions, except in the control, could be the antimicrobial metabolites. In addition, the abundance of fatty acids, such as oleic acid and stearamide in the active fraction, also enhanced the antimicrobial activity. This comprehensive metabolomics study could be used as the basis for isolating biocontrol compounds to be applied in oil palm fields to combat a Ganoderma infection.
    Matched MeSH terms: Discriminant Analysis
  14. Ramaiya SD, Lee HH, Xiao YJ, Shahbani NS, Zakaria MH, Bujang JS
    PLoS One, 2021;16(7):e0255059.
    PMID: 34310644 DOI: 10.1371/journal.pone.0255059
    Passiflora quadrangularis L. belongs to the family Passifloraceae which bears larger fruit with edible juicy mesocarp and pulp known as a good source of phytochemicals. Cultivation and plant management practices are known to influence the phytochemical compositions of agricultural produce. This study aimed to examine the influence of the cultivation practices on the antioxidant activities and secondary metabolites of the organically and conventionally grown P. quadrangularis. Findings revealed organically treated P. quadrangularis plants showed enhancement in their antioxidant properties and secondary metabolites profiles. Among the plant parts, leaves of P. quadrangularis grown organically possessed higher antioxidant activities compared to the conventional in all assays evaluated. The antioxidant activities in the edible parts of the P. quadrangularis fruit have also been enhanced through organic cultivation with significantly higher total phenolic content and DPPH in mesocarp, and the pulp showed higher total flavonoid content, DPPH and FRAP. This observation is supported by a higher level of vitamins and secondary metabolites in the samples. The secondary metabolites profile showed mesocarps were phenolic rich, the pulps were flavonoids rich while leaves showed good composition of phenolics, flavonoids and terpenoids with outstanding antioxidant activities. The common secondary metabolites for organically produced P. quadrangularis in different plant parts include 2-isopropyl-3-methoxycinnamic acid (mesocarp and pulp), myricetin isomers (pulp and leaves), and malvidin-3-O-arabinoside isomers (pulp and leaves). This study confirmed that organic cultivated P. quadrangularis possessed higher antioxidant activities contributed by its vitamins and secondary metabolites.
    Matched MeSH terms: Discriminant Analysis
  15. Rohman A, Che Man YB
    Food Chem, 2011 Nov 15;129(2):583-588.
    PMID: 30634271 DOI: 10.1016/j.foodchem.2011.04.070
    Currently, the authentication of virgin coconut oil (VCO) has become very important due to the possible adulteration of VCO with cheaper plant oils such as corn (CO) and sunflower (SFO) oils. Methods involving Fourier transform mid infrared (FT-MIR) spectroscopy combined with chemometrics techniques (partial least square (PLS) and discriminant analysis (DA)) were developed for quantification and classification of CO and SFO in VCO. MIR spectra of oil samples were recorded at frequency regions of 4000-650cm-1 on horizontal attenuated total reflectance (HATR) attachment of FTIR. DA can successfully classify VCO and that adulterated with CO and SFO using 10 principal components. Furthermore, PLS model correlates the actual and FTIR estimated values of oil adulterants (CO and SFO) with coefficient of determination (R2) of 0.999.
    Matched MeSH terms: Discriminant Analysis
  16. Agbolade O, Nazri A, Yaakob R, Ghani AA, Cheah YK
    BMC Bioinformatics, 2019 Dec 02;20(1):619.
    PMID: 31791234 DOI: 10.1186/s12859-019-3153-2
    BACKGROUND: Expression in H-sapiens plays a remarkable role when it comes to social communication. The identification of this expression by human beings is relatively easy and accurate. However, achieving the same result in 3D by machine remains a challenge in computer vision. This is due to the current challenges facing facial data acquisition in 3D; such as lack of homology and complex mathematical analysis for facial point digitization. This study proposes facial expression recognition in human with the application of Multi-points Warping for 3D facial landmark by building a template mesh as a reference object. This template mesh is thereby applied to each of the target mesh on Stirling/ESRC and Bosphorus datasets. The semi-landmarks are allowed to slide along tangents to the curves and surfaces until the bending energy between a template and a target form is minimal and localization error is assessed using Procrustes ANOVA. By using Principal Component Analysis (PCA) for feature selection, classification is done using Linear Discriminant Analysis (LDA).

    RESULT: The localization error is validated on the two datasets with superior performance over the state-of-the-art methods and variation in the expression is visualized using Principal Components (PCs). The deformations show various expression regions in the faces. The results indicate that Sad expression has the lowest recognition accuracy on both datasets. The classifier achieved a recognition accuracy of 99.58 and 99.32% on Stirling/ESRC and Bosphorus, respectively.

    CONCLUSION: The results demonstrate that the method is robust and in agreement with the state-of-the-art results.

    Matched MeSH terms: Discriminant Analysis
  17. Agbolade O, Nazri A, Yaakob R, Ghani AA, Cheah YK
    PLoS One, 2020;15(4):e0228402.
    PMID: 32271782 DOI: 10.1371/journal.pone.0228402
    BACKGROUND: The application of three-dimensional scan models offers a useful resource for studying craniofacial variation. The complex mathematical analysis for facial point acquisition in three-dimensional models has made many craniofacial assessments laborious.

    METHOD: This study investigates three-dimensional (3D) soft-tissue craniofacial variation, with relation to ethnicity, sex and age variables in British and Irish white Europeans. This utilizes a geometric morphometric approach on a subsampled dataset comprising 292 scans, taken from a Liverpool-York Head Model database. Shape variation and analysis of each variable are tested using 20 anchor anatomical landmarks and 480 sliding semi-landmarks.

    RESULTS: Significant ethnicity, sex, and age differences are observed for measurement covering major aspects of the craniofacial shape. The ethnicity shows subtle significant differences compared to sex and age; even though it presents the lowest classification accuracy. The magnitude of dimorphism in sex is revealed in the facial, nasal and crania measurement. Significant shape differences are also seen at each age group, with some distinct dimorphic features present in the age groups.

    CONCLUSIONS: The patterns of shape variation show that white British individuals have a more rounded head shape, whereas white Irish individuals have a narrower head shape. White British persons also demonstrate higher classification accuracy. Regarding sex patterns, males are relatively larger than females, especially in the mouth and nasal regions. Females presented with higher classification accuracy than males. The differences in the chin, mouth, nose, crania, and forehead emerge from different growth rates between the groups. Classification accuracy is best for children and senior adult age groups.

    Matched MeSH terms: Discriminant Analysis
  18. Nazri A, Agbolade O, Yaakob R, Ghani AA, Cheah YK
    BMC Bioinformatics, 2020 May 24;21(1):208.
    PMID: 32448182 DOI: 10.1186/s12859-020-3497-7
    BACKGROUND: Landmark-based approaches of two- or three-dimensional coordinates are the most widely used in geometric morphometrics (GM). As human face hosts the organs that act as the central interface for identification, more landmarks are needed to characterize biological shape variation. Because the use of few anatomical landmarks may not be sufficient for variability of some biological patterns and form, sliding semi-landmarks are required to quantify complex shape.

    RESULTS: This study investigates the effect of iterations in sliding semi-landmarks and their results on the predictive ability in GM analyses of soft-tissue in 3D human face. Principal Component Analysis (PCA) is used for feature selection and the gender are predicted using Linear Discriminant Analysis (LDA) to test the effect of each relaxation state. The results show that the classification accuracy is affected by the number of iterations but not in progressive pattern. Also, there is stability at 12 relaxation state with highest accuracy of 96.43% and an unchanging decline after the 12 relaxation state.

    CONCLUSIONS: The results indicate that there is a particular number of iteration or cycle where the sliding becomes optimally relaxed. This means the higher the number of iterations is not necessarily the higher the accuracy.

    Matched MeSH terms: Discriminant Analysis
  19. Wang J, Chen T, Zhang W, Zhao Y, Yang S, Chen A
    Food Chem, 2020 May 30;313:126093.
    PMID: 31927205 DOI: 10.1016/j.foodchem.2019.126093
    Multivariate stable isotope analysis combined with chemometrics was used to investigate and discriminate rice samples from six rice producing provinces in China (Heilongjiang, Jilin, Jiangsu, Zhejiang, Hunan and Guizhou) and four other Asian rice producing countries (Thailand, Malaysia, Philippines, and Pakistan). The stable isotope characteristics were analyzed for rice of different species cultivated with varied farming methods at different altitudes and latitudes/longitudes. The index groups of δ13C, δ15N, δ18O, 207/206Pb and 208/207Pb were screened and established for the selected samples with different geographical features by means of principal component analysis (PCA) and discriminant analysis (DA), which would provide a sound technical solution for rice traceability and serve as a template for further research on the traceability of other agricultural products, especially plant-derived products.
    Matched MeSH terms: Discriminant Analysis
  20. Mohammad AH, Al-Sadat N, Siew Yim L, Chinna K
    Biomed Res Int, 2014;2014:302097.
    PMID: 25276774 DOI: 10.1155/2014/302097
    This study aims to test the translated Hausa version of the stroke impact scale SIS (3.0) and further evaluate its psychometric properties. The SIS 3.0 was translated from English into Hausa and was tested for its reliability and validity on a stratified random sample adult stroke survivors attending rehabilitation services at stroke referral hospitals in Kano, Nigeria. Psychometric analysis of the Hausa-SIS 3.0 involved face, content, criterion, and construct validity tests as well as internal and test-retest reliability. In reliability analyses, the Cronbach's alpha values for the items in Strength, Hand function, Mobility, ADL/IADL, Memory and thinking, Communication, Emotion, and Social participation domains were 0.80, 0.92, 0.90, 0.78, 0.84, 0.89, 0.58, and 0.74, respectively. There are 8 domains in stroke impact scale 3.0 in confirmatory factory analysis; some of the items in the Hausa-SIS questionnaire have to be dropped due to lack of discriminate validity. In the final analysis, a parsimonious model was obtained with two items per construct for the 8 constructs (Chi-square/df < 3, TLI and CFI > 0.9, and RMSEA < 0.08). Cross validation with 1000 bootstrap samples gave a satisfactory result (P = 0.011). In conclusion, the shorter 16-item Hausa-SIS seems to measure adequately the QOL outcomes in the 8 domains.
    Matched MeSH terms: Discriminant Analysis
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links