Displaying publications 1 - 20 of 401 in total

Abstract:
Sort:
  1. Bilateral central vein stenosis in a dialysis patient with a pacemaker
    Yew KL, Anderson S, Farah R, Lim SH
    Asian Cardiovasc Thorac Ann, 2014 Oct;22(8):979-80.
    PMID: 24887840 DOI: 10.1177/0218492313491583
    Central vein stenosis is not uncommon in hemodialysis-dependent patients as a result of mechanical damage to the vessel walls from prior cannulation. It can cause ipsilateral upper limb swelling and pain, resulting in suboptimal hemodialysis. It is unfortunate for bilateral central vein stenosis to develop concomitantly, and rare in the setting of an in-situ pacemaker. This case illustrates the successful ligation of a nondependent left arteriovenous fistula and stenting of the right subclavian vein with functioning ipsilateral arteriovenous fistula, to overcome the problem of symptomatic bilateral upper limb swelling.
    Matched MeSH terms: Equipment Design
  2. Evaluation of real-world preferences and performance of hearing aids fitted according to the NAL-NL1 and DSL v5 procedures in children with moderately severe to profound hearing loss
    Quar TK, Ching TY, Newall P, Sharma M
    Int J Audiol, 2013 May;52(5):322-32.
    PMID: 23570290 DOI: 10.3109/14992027.2012.755740
    The study aims to compare the performance of hearing aids fitted according to the NAL-NL1 and DSL v5 prescriptive procedure for children.
    Matched MeSH terms: Equipment Design
  3. Paclitaxel-eluting balloon angioplasty and cobalt-chromium stents versus conventional angioplasty and paclitaxel-eluting stents in the treatment of native coronary artery stenoses in patients with diabetes mellitus
    Ali RM, Degenhardt R, Zambahari R, Tresukosol D, Ahmad WA, Kamar Hb, et al.
    EuroIntervention, 2011 May;7 Suppl K:K83-92.
    PMID: 22027736 DOI: 10.4244/EIJV7SKA15
    Coronary lesions in diabetics (DM) are associated with a high recurrence following percutaneous coronary intervention (PCI), even after drug-eluting stent (DES) deployment. Encouraging clinical data of the drug-eluting balloon catheter (DEB) SeQuent Please warrant its investigation in these patients.
    Matched MeSH terms: Equipment Design
  4. Complications after tenckhoff catheter insertion: a single-centre experience using multiple operators over four years
    Liu WJ, Hooi LS
    Perit Dial Int, 2010 03 12;30(5):509-12.
    PMID: 20228175 DOI: 10.3747/pdi.2009.00083
    OBJECTIVE: To analyze the complications after Tenckhoff catheter insertion among patients with renal failure needing dialysis. ♢

    PATIENTS AND METHODS: The open, paramedian approach is the commonest technique to insert the 62-cm coiled double-cuffed Tenckhoff peritoneal catheter. All patients with catheters inserted between January 2004 and November 2007 were retrospectively analyzed for demographics and followed for up to 1 month for complications. We excluded patients whose catheters had been anchored to the bladder wall and who underwent concurrent omentectomy or readjustment without removal of a malfunctioning catheter (n = 7). Intravenous cloxacillin was the standard preoperative antibiotic prophylaxis. ♢

    RESULTS: Over the 4-year study period, 384 catheters were inserted under local anesthetic into 319 patients [201 women (62.8%); mean age: 49.4 ± 16.7 years (range: 13 - 89 years); 167 (52.2%) with diabetes; 303 (95%) with end-stage renal disease] by 22 different operators. All Tenckhoff catheters were inserted by the general surgical (n = 223) or urology (n = 161) team. There were 29 cases (7.6%) of catheter migration, 22 (5.7%) of catheter obstruction without migration, 24 (6.3%) of exit-site infection, 12 (3.1%) of leak from the main incision, 14 (3.6%) of culture-proven wound infection, 11 (2.9%) post-insertion peritonitis, and 1 (0.3%) hemoperitoneum. No deaths were attributed to surgical mishap. ♢

    CONCLUSIONS: The most common complication was catheter migration. The paramedian insertion technique was safe, with low complication rates.

    Matched MeSH terms: Equipment Design
  5. Fulltext VitalQPlus: a potential screening tool for early diagnosis of COPD
    Sui CF, Ming LC, Neoh CF, Ibrahim B
    Int J Chron Obstruct Pulmon Dis, 2015;10:1613-22.
    PMID: 26316735 DOI: 10.2147/COPD.S84618
    Background: This study utilized a validated combination of a COPD Population Screener
    (COPD-PS) questionnaire and a handheld spirometric device as a screening tool for patients at high risk of COPD, such as smokers. The study aimed to investigate and pilot the feasibility and application of this combined assessment, which we termed the “VitalQPlus”, as a screening tool for the early detection of COPD, especially in primary care settings.
    Methods: This was a cross-sectional study screening potentially undiagnosed COPD patients using a validated five-item COPD-PS questionnaire together with a handheld spirometric device. Patients were recruited from selected Malaysian government primary care health centers.
    Results: Of the total of 83 final participants, only 24.1% (20/83) were recruited from Perak and Penang (peninsular Malaysia) compared to 75.9% (63/83) from Sabah (Borneo region). Our dual assessment approach identified 8.4% of the surveyed patients as having potentially undiagnosed COPD. When only the Vitalograph COPD-6 screening tool was used, 15.8% of patients were detected with a forced expiratory volume in 1 second/forced expiratory volume in 6 seconds (FEV1/FEV6) ratio at <0.75, while 35.9% of patients were detected with the COPD-PS questionnaire. These findings suggested that this dual assessment approach has a greater chance of identifying potentially undiagnosed COPD patients compared to the Vitalograph COPD-6 or COPD-PS questionnaire when used alone. Our findings show that patients with more symptoms (scores of >=5) yielded twice the percentage of outcomes of FEV1/FEV6 <0.75 compared to patients with fewer COPD symptoms (scores <5).
    Conclusion: With the availability of a simple screening questionnaire and the COPD-6, there is an opportunity easily to make patients more aware of their lung symptoms and to encourage the provision of early treatment. The proposed dual assessment approach, which we termed the VitalQPlus, may play a profound role in the early diagnosis of COPD, which is crucial in improving the clinical management of the disease.
    Keywords: spirometry, pulmonary function test, chronic obstructive pulmonary disease,
    airway obstruction
    Matched MeSH terms: Equipment Design
  6. Development of a bone substitute material based on alpha-tricalcium phosphate scaffold coated with carbonate apatite/poly-epsilon-caprolactone
    Bang LT, Ramesh S, Purbolaksono J, Long BD, Chandran H, Ramesh S, et al.
    Biomed Mater, 2015 Aug;10(4):045011.
    PMID: 26225725 DOI: 10.1088/1748-6041/10/4/045011
    Interconnected porous tricalcium phosphate ceramics are considered to be potential bone substitutes. However, insufficient mechanical properties when using tricalcium phosphate powders remain a challenge. To mitigate these issues, we have developed a new approach to produce an interconnected alpha-tricalcium phosphate (α-TCP) scaffold and to perform surface modification on the scaffold with a composite layer, which consists of hybrid carbonate apatite / poly-epsilon-caprolactone (CO3Ap/PCL) with enhanced mechanical properties and biological performance. Different CO3Ap combinations were tested to evaluate the optimal mechanical strength and in vitro cell response of the scaffold. The α-TCP scaffold coated with CO3Ap/PCL maintained a fully interconnected structure with a porosity of 80% to 86% and achieved an improved compressive strength mimicking that of cancellous bone. The addition of CO3Ap coupled with the fully interconnected microstructure of the α-TCP scaffolds coated with CO3Ap/PCL increased cell attachment, accelerated proliferation and resulted in greater alkaline phosphatase (ALP) activity. Hence, our bone substitute exhibited promising potential for applications in cancellous bone-type replacement.
    Matched MeSH terms: Equipment Design
  7. Sensitive detection of multiple pathogens using a single DNA probe
    Nordin N, Yusof NA, Abdullah J, Radu S, Hushiarian R
    Biosens Bioelectron, 2016 Dec 15;86:398-405.
    PMID: 27414245 DOI: 10.1016/j.bios.2016.06.077
    A simple but promising electrochemical DNA nanosensor was designed, constructed and applied to differentiate a few food-borne pathogens. The DNA probe was initially designed to have a complementary region in Vibrio parahaemolyticus (VP) genome and to make different hybridization patterns with other selected pathogens. The sensor was based on a screen printed carbon electrode (SPCE) modified with polylactide-stabilized gold nanoparticles (PLA-AuNPs) and methylene blue (MB) was employed as the redox indicator binding better to single-stranded DNA. The immobilization and hybridization events were assessed using differential pulse voltammetry (DPV). The fabricated biosensor was able to specifically distinguish complementary, non-complementary and mismatched oligonucleotides. DNA was measured in the range of 2.0×10(-9)-2.0×10(-13)M with a detection limit of 5.3×10(-12)M. The relative standard deviation for 6 replications of DPV measurement of 0.2µM complementary DNA was 4.88%. The fabricated DNA biosensor was considered stable and portable as indicated by a recovery of more than 80% after a storage period of 6 months at 4-45°C. Cross-reactivity studies against various food-borne pathogens showed a reliably sensitive detection of VP.
    Matched MeSH terms: Equipment Design
  8. Fulltext The craniotomy box: an innovative method of containing hazardous aerosols generated during skull saw use in autopsy on a COVID-19 body
    Hasmi AH, Khoo LS, Koo ZP, Suriani MUA, Hamdan AN, Yaro SWM, et al.
    Forensic Sci Med Pathol, 2020 09;16(3):477-480.
    PMID: 32500339 DOI: 10.1007/s12024-020-00270-z
    During a disease pandemic, there is still a requirement to perform postmortem examinations within the context of legal considerations. The management of the dead from COVID-19 should not impede the medicolegal investigation of the death where required by the authorities and legislation but additional health and safety precautions should be adopted for the necessary postmortem procedures. The authors have therefore used the craniotomy box in an innovative way to enable a safe alternative for skull and brain removal procedures on suspected or confirmed COVID-19 bodies. The craniotomy box technique was tested on a confirmed COVID-19 positive body where a full postmortem examination was performed by a team of highly trained personnel in a negative pressure Biosafety Level 3 (BSL-3) autopsy suite in the National Institute of Forensic Medicine (IPFN) Malaysia. This craniotomy box is a custom-made transparent plastic box with five walls but without a floor. Two circular holes were made in one wall for the placement of arms in order to perform the skull opening procedure. A swab to detect the presence of the SARS-CoV-2 virus was taken from the interior surface of the craniotomy box after the procedure. The result from the test using real-time reverse transcriptase polymerase chain reaction (rRT-PCR) proved that an additional barrier provided respiratory protection by containing the aerosols generated from the skull opening procedure. This innovation ensures procedures performed inside this craniotomy box are safe for postmortem personnel performing high risk autopsies during pandemics.
    Matched MeSH terms: Equipment Design
  9. Fulltext Microencapsulated Aliivibrio fischeri in alginate microspheres for monitoring heavy metal toxicity in environmental waters
    Futra D, Heng LY, Surif S, Ahmad A, Ling TL
    Sensors (Basel), 2014 Dec 05;14(12):23248-68.
    PMID: 25490588 DOI: 10.3390/s141223248
    In this article a luminescence fiber optic biosensor for the microdetection of heavy metal toxicity in waters based on the marine bacterium Aliivibrio fischeri (A. fischeri) encapsulated in alginate microspheres is described. Cu(II), Cd(II), Pb(II), Zn(II), Cr(VI), Co(II), Ni(II), Ag(I) and Fe(II) were selected as sample toxic heavy metal ions for evaluation of the performance of this toxicity microbiosensor. The loss of bioluminescence response from immobilized A. fischeri bacterial cells corresponds to changes in the toxicity levels. The inhibition of the luminescent biosensor response collected at excitation and emission wavelengths of 287 ± 2 nm and 487 ± 2 nm, respectively, was found to be reproducible and repeatable within the relative standard deviation (RSD) range of 2.4-5.7% (n = 8). The toxicity biosensor based on alginate micropsheres exhibited a lower limit of detection (LOD) for Cu(II) (6.40 μg/L), Cd(II) (1.56 μg/L), Pb(II) (47 μg/L), Ag(I) (18 μg/L) than Zn(II) (320 μg/L), Cr(VI) (1,000 μg/L), Co(II) (1700 μg/L), Ni(II) (2800 μg/L), and Fe(III) (3100 μg/L). Such LOD values are lower when compared with other previous reported whole cell toxicity biosensors using agar gel, agarose gel and cellulose membrane biomatrices used for the immobilization of bacterial cells. The A. fischeri bacteria microencapsulated in alginate biopolymer could maintain their metabolic activity for a prolonged period of up to six weeks without any noticeable changes in the bioluminescence response. The bioluminescent biosensor could also be used for the determination of antagonistic toxicity levels for toxicant mixtures. A comparison of the results obtained by atomic absorption spectroscopy (AAS) and using the proposed luminescent A. fischeri-based biosensor suggests that the optical toxicity biosensor can be used for quantitative microdetermination of heavy metal toxicity in environmental water samples.
    Matched MeSH terms: Equipment Design
  10. Polymethacrylate coated electrospun PHB fibers: An exquisite outlook for fabrication of paper-based biosensors
    Hosseini S, Azari P, Farahmand E, Gan SN, Rothan HA, Yusof R, et al.
    Biosens Bioelectron, 2015 Jul 15;69:257-64.
    PMID: 25765434 DOI: 10.1016/j.bios.2015.02.034
    Electrospun polyhydroxybutyrate (PHB) fibers were dip-coated by polymethyl methacrylate-co-methacrylic acid, poly(MMA-co-MAA), which was synthesized in different molar ratios of the monomers via free-radical polymerization. Fabricated platfrom was employed for immobilization of the dengue antibody and subsequent detection of dengue enveloped virus in enzyme-linked immunosorbent assay (ELISA). There is a major advantage for combination of electrospun fibers and copolymers. Fiber structre of electrospun PHB provides large specific surface area available for biomolecular interaction. In addition, polymer coated parts of the platform inherited the premanent presence of surface carboxyl (-COOH) groups from MAA segments of the copolymer which can be effectively used for covalent and physical protein immobilization. By tuning the concentration of MAA monomers in polymerization reaction the concentration of surface -COOH groups can be carefully controlled. Therefore two different techniques have been used for immobilization of the dengue antibody aimed for dengue detection: physical attachment of dengue antibodies to the surface and covalent immobilization of antibodies through carbodiimide chemistry. In that perspective, several different characterization techniques were employed to investigate the new polymeric fiber platform such as scanning electron microscopy (SEM), atomic force microscopy (AFM), water contact angle (WCA) measurement and UV-vis titration. Regardless of the immobilization techniques, substantially higher signal intensity was recorded from developed platform in comparison to the conventional ELISA assay.
    Matched MeSH terms: Equipment Design
  11. Long term mesenchymal stem cell culture on a defined synthetic substrate with enzyme free passaging
    Duffy CR, Zhang R, How SE, Lilienkampf A, De Sousa PA, Bradley M
    Biomaterials, 2014 Jul;35(23):5998-6005.
    PMID: 24780167 DOI: 10.1016/j.biomaterials.2014.04.013
    Mesenchymal stems cells (MSCs) are currently the focus of numerous therapeutic approaches in tissue engineering/repair because of their wide multi-lineage potential and their ability to modulate the immune system response following transplantation. Culturing these cells, while maintaining their multipotency in vitro, currently relies on biological substrates such as gelatin, collagen and fibronectin. In addition, harvesting cells from these substrates requires enzymatic or chemical treatment, a process that will remove a multitude of cellular surface proteins, clearly an undesirable process if cells are to be used therapeutically. Herein, we applied a high-throughput 'hydrogel microarray' screening approach to identify thermo-modulatable substrates which can support hES-MP and ADMSC growth, permit gentle reagent free passaging, whilst maintaining multi-lineage potential. In summary, the hydrogel substrate identified, poly(AEtMA-Cl-co-DEAA) cross-linked with MBA, permitted MSCs to be maintained over 10 passages (each time via thermo-modulation), with the cells retaining expression of MSC associated markers and lineage potency. This chemically defined system allowed the passaging and maintenance of cellular phenotype of this clinically important cell type, in the absence of harsh passaging and the need for biological substrates.
    Matched MeSH terms: Equipment Design
  12. In-stent restenosis: the gold standard has changed
    Chin K
    EuroIntervention, 2011 May;7 Suppl K:K43-6.
    PMID: 22027726 DOI: 10.4244/EIJV7SKA7
    In-stent restenosis remains an important issue even in the drug-eluting stent (DES) era today. In recent years, drug-eluting balloons (DEB) have emerged as a potential alternative to the treatment of in-stent restenosis. Paclitaxel was identified as the primary drug for DEB because of its rapid uptake and prolonged retention. Non-stent-based local drug delivery using DEB maintains the antiproliferation properties of DES, but without the limitations of DES such as subacute stent thrombosis, stent fractures, prolonged antiplatelet therapy and more importantly, avoiding a "stent-in-a-stent" approach. The first major impact of drug-eluting balloon (DEB) in the management of bare metal instent restenosis was the "PACCOCATH ISR I" randomised trial, comparing the efficacy of drug-eluting balloon versus uncoated balloon. The six months angiographic results showed a binary restenosis of 5% and 4% MACE in the drug-eluting balloon group, compared with 43% binary restenosis and 31% MACE, in the uncoated balloon group (p=0.002 and 0.02). The second major DEB trial is the "PEPCAD II Trial", comparing the efficacy of the SeQuent Please DEB with the Taxus drug-eluting stent in the treatment of bare-metal stent instent restenosis. At 6-month follow-up, in-segment late lumen loss was 0.38 ± 0.61 mm in the DES group versus 0.17 ± 0.42 mm (p=0.03) in the DEB group, resulting in a binary restenosis rate of 12/59 (20%) versus 4/57 (7%; p=0.06). At 12 months, MACE rates were 22% in the Taxus group and 9% in the DEB group (P=0.08). The TLR at 12 months was 15% in the Taxus group and 6% in the DEB group (p=0.15). Based on these two pivotal trials, the European Society of Cardiology Guidelines for Percutaneous Coronary Intervention (2010) recommended that DEB should be considered for the treatment of in-stent restenosis after prior bare-metal stent. This was accorded a class 2 IIa indication, with a level B evidence.
    Matched MeSH terms: Equipment Design
  13. A videoendoscopic evaluation of the upper airway in South East Asian adults with obstructive sleep apnea
    Abdullah B, Rajet KA, Abd Hamid SS, Mohammad WM
    Sleep Breath, 2011 Dec;15(4):747-54.
    PMID: 20957444 DOI: 10.1007/s11325-010-0431-7
    OBJECTIVES: We aimed to evaluate the severity of upper airway obstruction at the retropalatal and retroglossal regions in obstructive sleep apnea (OSA) patients.

    METHODOLOGY: This is a descriptive cross-sectional study at the Sleep Clinic, Department of Otorhinolaryngology-Head and Neck Surgery. Flexible nasopharyngolaryngoscopy was performed in seated erect and supine position. Retropalatal and retroglossal regions were continuously recorded during quiet breathing and Mueller's maneuver in both positions. Captured images were measured using Scion Image software and narrowing rate was calculated. Level of each site was classified based on Fujita classification and severity of obstruction using Sher scoring system for Mueller's maneuver.

    RESULTS: A total of 59 patients participated in this study. Twenty-nine (49.2%) participants had type 1 (retropalatal) obstruction, 23 (38.9%) had type 2 (retropalatal and retroglossal), and seven (11.9%) in type 3 (retroglossal) obstruction. Fifty (84.7%) of the patients have severe obstruction at the retropalatal region in supine position (SRP) followed by 35 (59.3%) at retropalatal region in erect position (ERP), 27 (45.8%) at retroglossal region in supine position (SRG) and eight (13.5%) at retroglossal region in erect position (ERG). The average oxygen saturation showed significant association in ERP (P = 0.012) and SRP (P < 0.001), but not significant in ERG and SRG.

    CONCLUSIONS: Videoendoscopy utilizing flexible nasopharyngolaryngoscopy and Scion Image software is reliable, minimally invasive, and useful as an office procedure in evaluating the multilevel obstruction of upper airway in OSA patients. The retropalatal region has more severe obstruction compared with retroglossal region either in erect or supine position.

    Matched MeSH terms: Equipment Design
  14. Perception of breathlessness by a 3-minute respiratory exerciser test predicts asthma exacerbations: a prospective cohort study
    Loh LC, Teh PN
    J Asthma, 2009 Aug;46(6):529-34.
    PMID: 19657890 DOI: 10.1080/02770900801890489
    We prospectively evaluated the use of a simple 3-Minute Respiratory Exerciser Test (3MRET) that estimates perception of dyspnea to identify patients at risk of asthma exacerbations. A total of 146 stable asthmatics (42 under-perceivers, 69 normal perceivers, and 35 over-perceivers) received follow-up for 12 months. The mean (SD) unscheduled visits to doctors among under-, normal, and over-perceivers were 1.8 (1.2), 2.2 (1.8), and 3.1 (2.3), respectively (p = 0.008). The mean (SD) hospital admissions among the groups were 1.3 (0.5), 1.2 (0.6), and 1.7 (1.3), respectively (p = 0.026). Compared to normal perceivers, over-perceivers had increased risks of unscheduled visits (OD: 5.12; 95% CI = 1.59 to 16.47) and hospital admissions (OD: 0.31; 95% CI = 0.23 to 0.41), defined as > or =2 events in 12 months. The association between over-perceiver and unscheduled visits remained significant after adjusting for forced expiratory volume in 1 second (FEV(1)). Sensitivity and specificity of over-perceivers are 77% and 47%, respectively, for unscheduled visits and 37% and 78%, respectively, for hospital admissions, with significantly better area under ROC for unscheduled visits (0.67 [95% CI = 0.56 to 0.77]; p = 0.003) than for hospital admissions (0.58 [0.471 to 0.70]; p = 0.127). We conclude that the 3MRET may have a role in identifying asthmatic patients with over-perception of dyspnea at risk of clinically important asthma exacerbations.
    Matched MeSH terms: Equipment Design
  15. Establishing learning curve for Tenckhoff catheter insertion by interventional nephrologist using CUSUM analysis: how many procedures and in which situation?
    Goh BL, Ganeshadeva Yudisthra M, Lim TO
    Semin Dial, 2009 Mar-Apr;22(2):199-203.
    PMID: 19426429 DOI: 10.1111/j.1525-139X.2008.00536.x
    Peritoneal dialysis (PD) catheter insertion success rate is known to vary among different operators, and peritoneoscope PD catheter insertion demands mastery of a steep learning curve. Defining a learning curve using a continuous monitoring tool such as a Cumulative Summation (CUSUM) chart is useful for planning training programs. We aimed to analyze the learning curve of a trainee nephrologist in performing peritoneoscope PD catheter implantation with CUSUM chart. This was a descriptive single-center study using collected data from all PD patients who underwent peritoneoscope PD catheter insertion in our hospital. CUSUM model was used to evaluate the learning curve for peritoneoscope PD catheter insertion. Unacceptable primary failure rate (i.e., catheter malfunction within 1 month of insertion) was defined at >40% and acceptable performance was defined at <25%. CUSUM chart showed the learning curve of a trainee in acquiring new skill. As the trainee became more skillful with training, the CUSUM curve flattened. Technical proficiency of the trainee nephrologist in performing peritoneoscope Tenckhoff catheter insertion (<25% primary catheter malfunction) was attained after 23 procedures. We also noted earlier in our program that Tenckhoff catheters directed to the right iliac fossae had poorer survival as compared to catheters directed to the left iliac fossae. Survival of catheters directed to the left iliac fossae was 94.6% while the survival for catheters directed to the right iliac fossae was 48.6% (p < 0.01). We advocate that quality control of Tenckhoff catheter insertion is performed using CUSUM charting as described to monitor primary catheter dysfunction (i.e., failure of catheter function within 1 month of insertion), primary leak (i.e., within 1 month of catheter insertion), and primary peritonitis (i.e., within 2 weeks of catheter insertion).
    Matched MeSH terms: Equipment Design
  16. A comparative evaluation of cleaning efficacy (debris and smear layer removal) of hand and two NiTi rotary instrumentation systems (K3 and ProTaper): a SEM study
    Reddy KB, Dash S, Kallepalli S, Vallikanthan S, Chakrapani N, Kalepu V
    J Contemp Dent Pract, 2013 Nov 1;14(6):1028-35.
    PMID: 24858745
    The present study was conducted to compare the cleaning efficacy (debris and smear layer removal) of hand and two NiTi rotary instrumentation systems (K3 and ProTaper).
    Matched MeSH terms: Equipment Design
  17. Fulltext Titanium Dioxide Nanoparticle-Based Interdigitated Electrodes: A Novel Current to Voltage DNA Biosensor Recognizes E. coli O157:H7
    Nadzirah Sh, Azizah N, Hashim U, Gopinath SC, Kashif M
    PLoS One, 2015;10(10):e0139766.
    PMID: 26445455 DOI: 10.1371/journal.pone.0139766
    Nanoparticle-mediated bio-sensing promoted the development of novel sensors in the front of medical diagnosis. In the present study, we have generated and examined the potential of titanium dioxide (TiO2) crystalline nanoparticles with aluminium interdigitated electrode biosensor to specifically detect single-stranded E.coli O157:H7 DNA. The performance of this novel DNA biosensor was measured the electrical current response using a picoammeter. The sensor surface was chemically functionalized with (3-aminopropyl) triethoxysilane (APTES) to provide contact between the organic and inorganic surfaces of a single-stranded DNA probe and TiO2 nanoparticles while maintaining the sensing system's physical characteristics. The complement of the target DNA of E. coli O157:H7 to the carboxylate-probe DNA could be translated into electrical signals and confirmed by the increased conductivity in the current-to-voltage curves. The specificity experiments indicate that the biosensor can discriminate between the complementary sequences from the base-mismatched and the non-complementary sequences. After duplex formation, the complementary target sequence can be quantified over a wide range with a detection limit of 1.0 x 10(-13)M. With target DNA from the lysed E. coli O157:H7, we could attain similar sensitivity. Stability of DNA immobilized surface was calculated with the relative standard deviation (4.6%), displayed the retaining with 99% of its original response current until 6 months. This high-performance interdigitated DNA biosensor with high sensitivity, stability and non-fouling on a novel sensing platform is suitable for a wide range of biomolecular interactive analyses.
    Matched MeSH terms: Equipment Design
  18. Fulltext Magnetic stimulation for stress urinary incontinence: study protocol for a randomized controlled trial
    Lim R, Liong ML, Leong WS, Khan NA, Yuen KH
    Trials, 2015;16:279.
    PMID: 26093910 DOI: 10.1186/s13063-015-0803-1
    There is currently a lack of randomized, sham-controlled trials that are adequately powered, using validated outcomes, to allow for firm recommendations on the use of magnetic stimulation for stress urinary incontinence. We report a protocol of a multicenter, randomized, double-blind, sham-controlled parallel-group trial to evaluate the efficacy of magnetic stimulation for stress urinary incontinence.
    Matched MeSH terms: Equipment Design
  19. Fulltext Acceptance of the Accuhaler, a multi-dose powder inhaler, among asthmatic patients: a comparison with the pressurized metered-dose inhaler
    Liam CK, Lim KH, Wong CM
    Asian Pac J Allergy Immunol, 2000 Sep;18(3):135-40.
    PMID: 11270467
    This study aimed to evaluate dry powder inhaler naive asthmatic patients' perception and preference of the Accuhaler, a multidose dry powder inhaler and the pressurized metered dose inhaler (pMDI). After the first instruction, 66.7% of 48 patients enrolled in the study could demonstrate the correct use of the Accuhaler. When the patients were asked to compare the pMDI and the Accuhaler after using the Accuhaler to administer salmeterol for 4 weeks, the Accuhaler scored significantly better than the pMDI for the following features: knowing how many doses are left, presence of an attached cover, taste, instruction for use, attractiveness, ease of use, ease of holding, shape, and comfortable mouthpiece. The pMDI scored better to the Accuhaler in terms of size. More patients preferred the Accuhaler than the pMDI; the presence of a dose counter and perceived ease of use were the main reasons cited for their preference for the Accuhaler.
    Study site: Asthma Clinic, University of Malaya Medical Centre (UMMC), Kuala Lumpur, Malaysia
    Matched MeSH terms: Equipment Design
  20. An investigation of the effect of prolonged glove wearing on the hand skin health of dental healthcare workers
    Boyle DK, Forsyth A, Bagg J, Stroubou K, Griffiths CE, Burke FJ
    J Dent, 2002 Jul-Aug;30(5-6):233-41.
    PMID: 12450714
    Glove wearing during patient treatment has been central to dental surgery infection control for over 15 years. However, little is known about the cutaneous effects of glove wearing on the hands of dental healthcare workers (DHCWs). The objective of this project was to assess the hand skin health of DHCWs before and after wearing gloves of two types and to compare this with a control group of non-DHCWs.
    Matched MeSH terms: Equipment Design
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links