Displaying publications 1 - 20 of 162 in total

Abstract:
Sort:
  1. Hassan M, Maarof ND, Ali ZM, Noor NM, Othman R, Mori N
    Biosci Biotechnol Biochem, 2012;76(8):1463-70.
    PMID: 22878188
    NADP(+)-dependent geraniol dehydrogenase (EC 1.1.1.183) is an enzyme that catalyzes the oxidation of geraniol to geranial. Stable, highly active cell-free extract was obtained from Polygonum minus leaves using polyvinylpolypyrrolidone, Amberlite XAD-4, glycerol, 2-mercaptoethanol, thiourea, and phenylmethylsulfonylfluoride in tricine-NaOH buffer (pH 7.5). The enzyme preparation was separated into two activity peaks, geraniol-DH I and II, by DEAE-Toyopearl 650M column chromatography at pH 7.5. Both isoenzymes were purified to homogeneity in three chromatographic steps. The geraniol-DH isoenzymes were similar in molecular mass, optimal temperature, and pH, but the isoelectric point, substrate specificity, and kinetic parameters were different. The K(m) values for geraniol of geraniol-DH I and II appeared to be 0.4 mM and 0.185 mM respectively. P. minus geraniol-DHs are unusual among geraniol-DHs in view of their thermal stability and optimal temperatures, and also their high specificity for allylic alcohols and NADP(+).
    Matched MeSH terms: Glycerol
  2. Memon AA, Wahid H, Rosnina Y, Goh YM, Ebrahimi M, Nadia FM
    Anim. Reprod. Sci., 2012 Dec;136(1-2):55-60.
    PMID: 23182473 DOI: 10.1016/j.anireprosci.2012.10.020
    This study was conducted to determine the effect of antioxidants on standard semen parameters, lipid peroxidation and fertility of Boer goat semen after cryopreservation. Ejaculates from four bucks were collected, evaluated and pooled at 37°C. The pooled semen was diluted with Tris citric acid fructose for washing. Semen samples, which were diluted with a Tris-based extender containing the antioxidant ascorbic acid (8.5mg/ml), butylated hydroxytoluene (2mM), cysteine (5mM) and hypotaurine (10mM) and an extender without antioxidant supplementation were cooled to 4°C and frozen in 0.25 straws with programmable freezer and finally stored in liquid nitrogen. Data (10 replicates) were analyzed by one-way analysis of variance. Mean (±SEM) progressive motility was significantly higher in ascorbic acid than other supplement groups and control samples (P>0.05). Best values were observed in ascorbic acid followed by BHT, cysteine, and hypotaurine. Antioxidant supplementation in extender showed significant (P<0.05) better values than the control group for sperm membrane integrity, acrosome integrity and viability. The ability of antioxidants to reduce the lipid peroxidation (LPO) after freeze thawing was measured by the formation of malondialdehyde (MDA) using the thiobarbituric acid method. Results showed that addition of antioxidants significantly reduced the rate of LPO in comparison to control (P<0.05). Ascorbic acid exhibited better values (1.27±0.28), than butylated hydroxytoluene, cysteine and hypotaurine 1.32±0.42, 2.27±0.16 and 2.38±0.17 respectively, which are significantly better than control (3.52±0.54). Higher pregnancy rate was observed with ascorbic acid followed by butylated hydroxtolune, hypotaurine and cysteine. However, differences in the fertility rate were non-significant with hypotaurine, cysteine and control groups.
    Matched MeSH terms: Glycerol
  3. Chai LC, Kong BH, Elemfareji OI, Thong KL
    PLoS One, 2012;7(5):e36201.
    PMID: 22662115 DOI: 10.1371/journal.pone.0036201
    Salmonella enterica serovar Typhi (S. Typhi) is strictly a human intracellular pathogen. It causes acute systemic (typhoid fever) and chronic infections that result in long-term asymptomatic human carriage. S. Typhi displays diverse disease manifestations in human infection and exhibits high clonality. The principal factors underlying the unique lifestyle of S. Typhi in its human host during acute and chronic infections remain largely unknown and are therefore the main objective of this study.
    Matched MeSH terms: Glycerol
  4. Mienda BS, Shamsir MS, Illias RM
    Comput Biol Chem, 2016 Apr;61:130-7.
    PMID: 26878126 DOI: 10.1016/j.compbiolchem.2016.01.013
    The metabolic role of 6-phosphogluconate dehydrogenase (gnd) under anaerobic conditions with respect to succinate production in Escherichia coli remained largely unspecified. Herein we report what are to our knowledge the first metabolic gene knockout of gnd to have increased succinic acid production using both glucose and glycerol substrates in E. coli. Guided by a genome scale metabolic model, we engineered the E. coli host metabolism to enhance anaerobic production of succinic acid by deleting the gnd gene, considering its location in the boundary of oxidative and non-oxidative pentose phosphate pathway. This strategy induced either the activation of malic enzyme, causing up-regulation of phosphoenolpyruvate carboxylase (ppc) and down regulation of phosphoenolpyruvate carboxykinase (ppck) and/or prevents the decarboxylation of 6 phosphogluconate to increase the pool of glyceraldehyde-3-phosphate (GAP) that is required for the formation of phosphoenolpyruvate (PEP). This approach produced a mutant strain BMS2 with succinic acid production titers of 0.35gl(-1) and 1.40gl(-1) from glucose and glycerol substrates respectively. This work further clearly elucidates and informs other studies that the gnd gene, is a novel deletion target for increasing succinate production in E. coli under anaerobic condition using glucose and glycerol carbon sources. The knowledge gained in this study would help in E. coli and other microbial strains development for increasing succinate production and/or other industrial chemicals.
    Matched MeSH terms: Glycerol
  5. Pakalapati H, Show PL, Chang JH, Liu BL, Chang YK
    Int J Biol Macromol, 2020 Dec 15;165(Pt B):2494-2507.
    PMID: 33736272 DOI: 10.1016/j.ijbiomac.2020.10.099
    In this research, a protein nanofiber membrane (P-COOH-CEW) was developed to treat the dye waste. Initially, polyacrylonitrile nanofiber membrane (PAN) was prepared by electrospinning, followed by heat treatment, alkaline treatment, and neutralization to obtain weak cation exchange nanofiber membrane (P-COOH). The P-COOH membrane was chemically coated with chicken egg white (CEW) proteins to obtain a 3D structure of complex protein nanofiber membrane (P-COOH-CEW). The composite prepared was characterized with Fourier Transform Infrared analysis (FTIR), Scanning Electron Microscopy (SEM), and thermogravimetric analysis (TGA). Further, the composite was evaluated by investigating the removal of Toluidine Blue O (TBO) from aqueous solutions in batch conditions. Different operating parameters - coupling of CEW, shaking rate, initial pH, contact time, temperature, and dye concentration were studied. From the results, maximum removal capacity and equilibrium association constant was determined to be 546.24 mg/g and 10.18 mg/mg, respectively at pH 10 and 298 K. The experimental data were well fitted to pseudo-second order model. Furthermore, desorption studies revealed that the adsorbed TBO can be completely eluted by using 50% ethanol or 50% glycerol in 1 M NaCl solution. Additionally, the reuse of P-COOH-CEW membrane reported to have 97.32% of removal efficiency after five consecutive adsorption/desorption cycles.
    Matched MeSH terms: Glycerol
  6. Baskaran SM, Zakaria MR, Mukhlis Ahmad Sabri AS, Mohamed MS, Wasoh H, Toshinari M, et al.
    Environ Pollut, 2021 Feb 13;276:116742.
    PMID: 33621735 DOI: 10.1016/j.envpol.2021.116742
    Biodiesel side stream waste glycerol was identified as a cheap carbon source for rhamnolipids (RLs) production which at the same time could improve the management of waste. The present study aimed to produce RLs by using Pseudomonas aeruginosa RS6 utilizing waste glycerol as a substrate and to evaluate their physico-chemicals properties. Fermentation conditions such as temperature, initial medium pH, waste glycerol concentration, nitrogen sources and concentrations resulted in different compositions of the mono- and di-RLs produced. The maximum RLs production of 2.73 g/L was obtained when P. aeruginosa RS6 was grown in a basal salt medium supplemented with 1% waste glycerol and 0.2 M sodium nitrate at 35 °C and pH 6.5. At optimal fermentation conditions, the emulsification index (E24) values of cooking oil, diesel oil, benzene, olive oil, petroleum, and kerosene were all above E24=50%. The surface tension reduction obtained from 72.13 mN/m to 29.4-30.4 mN/m was better than the surface activity of some chemical-based surfactants. The RLs produced possessed antimicrobial activities against Gram-negative and Gram-positive bacteria with values ranging from 37% to 77% of growth inhibition when 1 mg/mL of RLs was used. Concentrations of RLs below 1500 μg/mL did not induce phytotoxicity effects on the tested seeds (Vigna radiata) compared to the chemical-based- surfactant, SDS. Furthermore, RLs tested on zebrafish (Danio rerio) embryos only exhibited low acute toxicity with an LC50 value of 72.97 μg/mL at 48 h of exposure suggesting a green and eco-biochemical worthy of future applications to replace chemical-based surfactants.
    Matched MeSH terms: Glycerol
  7. Yaradoddi JS, Banapurmath NR, Ganachari SV, Soudagar MEM, Mubarak NM, Hallad S, et al.
    Sci Rep, 2020 12 15;10(1):21960.
    PMID: 33319818 DOI: 10.1038/s41598-020-78912-z
    The main goal of the present work was to develop a value-added product of biodegradable material for sustainable packaging. The use of agriculture waste-derived carboxymethyl cellulose (CMC) mainly is to reduce the cost involved in the development of the film, at present commercially available CMS is costly. The main focus of the research is to translate the agricultural waste-derived CMC to useful biodegradable polymer suitable for packaging material. During this process CMC was extracted from the agricultural waste mainly sugar cane bagasse and the blends were prepared using CMC (waste derived), gelatin, agar and varied concentrations of glycerol; 1.5% (sample A), 2% (sample B), and 2.5% (sample C) was added. Thus, the film derived from the sample C (gelatin + CMC + agar) with 2.0% glycerol as a plasticizer exhibited excellent properties than other samples A and B. The physiochemical properties of each developed biodegradable plastics (sample A, B, C) were characterized using Fourier Transform Infra-Red (FTIR) spectroscopy and Differential Scanning Calorimetry (DSC), Thermogravimetric analysis (TGA). The swelling test, solubility in different solvents, oil permeability coefficient, water permeability (WP), mechanical strength of the produced material was claimed to be a good material for packaging and meanwhile its biodegradability (soil burial method) indicated their environmental compatibility nature and commercial properties. The reflected work is a novel approach, and which is vital in the conversion of organic waste to value-added product development. There is also another way to utilize commercial CMC in preparation of polymeric blends for the packaging material, which can save considerable time involved in the recovery of CMC from sugarcane bagasse.
    Matched MeSH terms: Glycerol
  8. Cui YC, Qiu YS, Wu Q, Bu G, Peli A, Teh SW, et al.
    Exp Biol Med (Maywood), 2021 May;246(10):1177-1183.
    PMID: 33535809 DOI: 10.1177/1535370220985468
    Osteoblasts play an important role in bone regeneration and repair. The hypoxia condition in bone occurs when bone undergoes fracture, and this will trigger a series of biochemical and mechanical changes to enable bone repair. Hence, it is interesting to observe the metabolites and metabolism changes when osteoblasts are exposed to hypoxic condition. This study has looked into the response of human osteoblast hFOB 1.19 under normoxic and hypoxic conditions by observing the cell growth and utilization of metabolites via Phenotype MicroArrays™ under these two different oxygen concentrations. The cell growth of hFOB 1.19 under hypoxic condition showed better growth compared to hFOB 1.19 under normal condition. In this study, osteoblast used glycolysis as the main pathway to produce energy as hFOB 1.19 in both hypoxic and normoxic conditions showed cell growth in well containing dextrin, glycogen, maltotriose, D-maltose, D-glucose-6-phospate, D-glucose, D-mannose, D-Turanose, D-fructose-6-phosphate, D-galactose, uridine, adenosine, inosine and α-keto-glutaric acid. In hypoxia, the cells have utilized additional metabolites such as α-D-glucose-1-phosphate and D-fructose, indicating possible activation of glycogen synthesis and glycogenolysis to metabolize α-D-glucose-1-phosphate. Meanwhile, during normoxia, D-L-α-glycerol phosphate was used, and this implies that the osteoblast may use glycerol-3-phosphate shuttle and oxidative phosphorylation to metabolize glycerol-3-phosphate.
    Matched MeSH terms: Glycerol
  9. Najat Dzaki, Ghows Azzam
    Trop Life Sci Res, 2019;30(2):191-200.
    MyJurnal
    In Drosophila, the Glycerol-3-phosphate dehydrogenase (Gpdh) enzyme plays an active role in many pathways, including the glycerol metabolic pathway and the alphaglycerophosphate cycle. It is also important for ethanol metabolism, as well as flight muscle development. Recent years have exposed small RNAs as a major posttranscriptional regulator of multiple metabolic-pathway genes. Of the many kinds of these RNAs at work, micro RNAs (miRNAs) are the most widely implicated and well understood. However, the roles they may play in regulating Gpdh has never been shown in any model organism. In this study, a pasha-mutant D. melanogaster strain was found to express only 25% of the Gpdh levels typical of their wild type counterparts. Such mutants lack the ability to produce pasha, a protein integral during miRNA-processing, and as a consequence do not produce mature miRNAs. As miRNA-centric regulation often culminates in the depletion of their targets, the concurrent downregulation of Gpdh observed in their absence here therefore alludes to two possibilities: one, that rather than being explicitly bound and repressed by miRNAs, Gpdh expression relies on their action upon an upstream Gpdh-antagonist; or two, that Gpdh may come under the regulation of another class of miRNA-like elements called mirtrons, which do not require pasha to be processed into their functional form. The preliminary findings in this study further highlights the imperative nature of miRNAs in regulating metabolic processes and subsequently, ensuring proper organismal development and its continued survival.
    Matched MeSH terms: Glycerol; Glycerolphosphate Dehydrogenase
  10. Kiing, Sie Cheong, Balasubramaniam, Jaya-Raj, Yiu, Pang Hung, Wong, Sie Chuong, Amartalingam, Rajan
    MyJurnal
    Polyethylene is a widely used packaging material, but its non-biodegradable nature can lead to waste
    disposal problems. This increases the concern in research and development of biodegradable plastics from natural resource as alternatives to petroleum-derived plastics. In this study, biodegradable plastic composites were prepared by blending thermoplastic starch with natural rubber in the present of glycerol as plasticizer. Local sago starch was cast with 0.5 to 10% of natural rubber to prepare the bioplastic. The products were characterized by differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), water absorption test, biodegradable test, hydrolysis test, and mechanical analysis. Meanwhile, composite with natural rubber latex was increased from 0.5 to 10% showing that the melting temperature is in the range of 120 to 150˚C, but with no significant difference. The water absorption characteristics, biodegradability, and tensile strength decreased by 11.21%, 30.18%, and 20.733 MPa, respectively. However, the elongation at break was increased from 26.67 to 503.3%. The findings of this study showed that sago starch has a great potential in bioplastic production with good miscibility and compatibility.
    Matched MeSH terms: Glycerol
  11. Maizura, M., Fazilah, A., Norziah, M.H., Karim, A.A.
    MyJurnal
    Antibacterial effect of modified sago starch-alginate edible film incorporating lemongrass oil at various concentrations was studied. Edible films were prepared from a mixture of modified sago starch and alginate. Lemongrass oil (0.1 - 0.4%, v/w) and glycerol (0 and 20%, w/w) were incorporated in the films to act as natural antimicrobial agent and plasticizer, respectively. The films were characterized for antibacterial activity against food pathogenic bacteria such as Escherichia coli O157:H7, Salmonella Enteritidis and Staphylococcus aureus. The edible film exhibited antibacterial activity against Escherichia coli O157:H7 and Salmonella Enteritidis by using agar diffusion assay method. For films tested against Escherichia coli O157:H7, the zone of inhibition increased significantly (p < 0.05) with addition of lemongrass oil at all levels both in the presence and absence of glycerol. The films also significantly (p < 0.05) inhibited the growth of Salmonella enteritidis only with 0.4% lemongrass oil (in the presence and absence of glycerol). However, the films containing lemongrass oil did not show any inhibition effect on Staphylococcus aureus.
    Matched MeSH terms: Glycerol
  12. Febriyenti, Azmin Mohd. Noor, Saringat Baei
    MyJurnal
    The objective of this research was to formulate an aerosol concentrate containing haruan (Channa
    striatus) water extract that would produce a thin film when sprayed onto a wound and could be used for wound dressing. The aerosol concentrates were formulated with various polymer and plasticiser mixtures and tested in dispersion systems. The polymers evaluated were hydroxypropyl methylcellulose (HPMC), carboxymethylcellulose sodium (CMC Sodium), acacia, tragacanth, chitosan, gelatine and gelatine (bloom 151–160), all at concentrations of 2%. The plasticisers evaluated were polyethylene glycol (PEG) 400 and 4000, glycerine, propylene glycol, and triacetin. Films were prepared from film-forming dispersions by casting techniques. Film-forming dispersions were characterised in terms of pH, density, surface tension, rheological properties, particle size distribution, and tackiness. Based on these evaluations, HPMC was chosen as the best polymer. It produced a film with the expected qualities and was easy to reproduce in the form of dispersions or as thin transparent films. Glycerine was judged as the most appropriate plasticiser because it produced the concentrate having the desired qualities and properties expected from an aerosol concentrate.
    Matched MeSH terms: Glycerol
  13. Noorhisham Tan Kofli, Nagahisa K, Shioya S, Shimizu H
    Sains Malaysiana, 2006;35:9-15.
    During fermentation cells are subjected to various kinds of stress. One of the stresses concerned is high osmotic environment, which cells need to encounter in order to continue growing. To understand how cells adapt to this stress condition, information from genome, proteome and metabolome levels are crucial. In yeast cells, it was report that they produce glycerol to avoid depletion of water in the cell that could lead to cell shrinkage and eventually death. Thus, investigation of physiological responses were executed by shake flask method using three different Saccharomyces cerevisiae strains namely s288c, IFO2347 and FY834 which were grown in yeast potato dextrose (YPD) medium under the treatment of sodium chloride (NaCl) and sorbitol at 1M concentration to create the osmotic condition. These agents were added into the medium after 5 hours of fermentation when the cells reached exponential phase and carbon source is still available. The results proved that addition of both NaCl and sorbitol created the osmotic condition during growth resulted in higher accumulation of glycerol and trehalose when compared to the control in all strains. Among these strains, production of glycerol (g glycerol/g cell dry weight) was found highest in IFO2347, followed by s288c and FY834.
    Matched MeSH terms: Glycerol
  14. Zainal-Abidin MH, Hayyan M, Ngoh GC, Wong WF
    ACS Omega, 2020 Jan 28;5(3):1656-1668.
    PMID: 32010840 DOI: 10.1021/acsomega.9b03709
    The application of graphene in the field of drug delivery has attracted massive interest among researchers. However, the high toxicity of graphene has been a drawback for its use in drug delivery. Therefore, to enhance the biocompatibility of graphene, a new route was developed using ternary natural deep eutectic solvents (DESs) as functionalizing agents, which have the capability to incorporate various functional groups and surface modifications. Physicochemical characterization analyses, including field emission scanning electron microscope, fourier-transform infrared spectroscopy, Raman spectroscopy, Brunauer-Emmett-Teller, X-ray diffraction, and energy dispersive X-ray, were used to verify the surface modifications introduced by the functionalization process. Doxorubicin was loaded onto the DES-functionalized graphene. The results exhibited significantly improved drug entrapment efficiency (EE) and drug loading capacity (DLC) compared with pristine graphene and oxidized graphene. Compared with unfunctionalized graphene, functionalization with DES choline chloride (ChCl):sucrose:water (4:1:4) resulted in the highest drug loading capacity (EE of 51.84% and DLC of 25.92%) followed by DES ChCl:glycerol:water (1:2:1) (EE of 51.04% and DLC of 25.52%). Following doxorubicin loading, graphene damaged human breast cancer cell line (MCF-7) through the generation of intracellular reactive oxygen species (>95%) and cell cycle disruption by increase in the cell population at S phase and G2/M phase. Thus, DESs represent promising green functionalizing agents for nanodrug carriers. To the best of our knowledge, this is the first time that DES-functionalized graphene has been used as a nanocarrier for doxorubicin, illustrating the potential application of DESs as functionalizing agents in drug delivery systems.
    Matched MeSH terms: Glycerol
  15. Wali S, Gupta R, Yu JJ, Mfuh A, Gao X, Guentzel MN, et al.
    Metabolomics, 2016 Apr;12(4).
    PMID: 27642272
    INTRODUCTION: Chlamydia trachomatis (Ct), is the leading cause of sexually transmitted infections worldwide. Host transcriptomic- or proteomic profiling studies have identified key molecules involved in establishment of Ct infection or the generation of anti Ct-immunity. However, the contribution of the host metabolome is not known.

    OBJECTIVES: The objective of this study was to determine the contribution of host metabolites in genital Ct infection.

    METHODS: We used high-performance liquid chromatography-mass spectrometry, and mapped lipid profiles in genital swabs obtained from female guinea pigs at days 3, 9, 15, 30 and 65 post Ct serovar D intravaginal infection.

    RESULTS: Across all time points assessed, 13 distinct lipid species including choline, ethanolamine and glycerol were detected. Amongst these metabolites, phosphatidylcholine (PC) was the predominant phospholipid detected from animals actively shedding bacteria i.e., at 3, 9, and 15 days post infection. However, at days 30 and 65 when the animals had cleared the infection, PC was observed to be decreased compared to previous time points. Mass spectrometry analyses of PC produced in guinea pigs (in vivo) and 104C1 guinea pig cell line (in vitro) revealed distinct PC species following Ct D infection. Amongst these, PC 16:0/18:1 was significantly upregulated following Ct D infection (p < 0.05, >twofold change) in vivo and in vitro infection models investigated in this report. Exogenous addition of PC 16:0/18:1 resulted in significant increase in Ct D in Hela 229 cells.

    CONCLUSION: This study demonstrates a role for host metabolite, PC 16:0/18:1 in regulating genital Ct infection in vivo and in vitro.

    Matched MeSH terms: Glycerol
  16. Nor, M.H.M., Nazmi, N.N.M., Sarbon, N.M.
    MyJurnal
    The aim of this study was to investigate the functional properties of chicken skin gelatin films with varied concentrations of a hydrophilic plasticizer. Gelatin film solutions with different glycerol concentrations A(control), B(5%), C(10%), D(15%) and E(20%), were stirred at 45°C for 20min and oven dried at 45°C. Film characterization determination were included, tensile strength (TS), elongation at break (EAB), water vapor permeability (WVP), solubility, transparency, moisture content, Fourier Transform Infrared Spectroscopy (FTIR), and X-ray Diffraction (X-RD). Glycerol added resulted in improvement of TS and WVP properties. Film B (5% glycerol) demonstrated low EAB (106%), WVP (0.0175 g.mm/h.m2.k.Pa) and solubility (58.64%), but with high TS (3.64 MPa), moisture content (16.0%), UV light transmission (0.04%) and transparency (0.81) compared to films C, D and E. FTIR spectrum analyses demonstrated an aliphatic alcohol group only for Film E (20% glycerol). Hence, chicken skin gelatin film at 5% glycerol concentration showed the most promising potential for industrial food processing applications.
    Matched MeSH terms: Glycerol
  17. Ramakrishnan N, Sharma S, Gupta A, Alashwal BY
    Int J Biol Macromol, 2018 May;111:352-358.
    PMID: 29320725 DOI: 10.1016/j.ijbiomac.2018.01.037
    Plastics have been one of the highly valued materials and it plays an significant role in human's life such as in food packaging and biomedical applications. Bioplastic materials can gradually work as a substitute for various materials based on fossil oil. The issue like sustainability and environmental challenges which occur due to manufacturing and disposal of synthetic plastics can be conquering by bio-based plastics. Feathers are among the most inexpensive abundant, and renewable protein sources. Feathers disposal to the landfills leads to environmental pollutions and it results into wastage of 90% of protein raw material. Keratin is non-burning hydrophilic, and biodegradable due to which it can be applicable in various ways via chemical processing. Main objective of this research is to synthesis bioplastic using keratin from chicken feathers. Extracted keratin solution mixed with different concentration of glycerol (2 to 10%) to produce plastic films. The mixture was stirred under constant magnetic stirring at 60 °C for 5 h. The mixtures are then poured into aluminum weighing boat and dried in an oven at 60 °C for 24 h. The mechanical properties of the samples were tested and the physic-chemical properties of the bioplastic were studied. According to the results, Scanning Electron Microscopy test showed good compatible morphologies without holes, cavity and edge. The difference in chemical composition was analyzed using Fourier transform infrared spectroscopy (FTIR). The samples were also characterized by thermo gravimetric analysis (TGA), differential scanning calorimetry (DSC), X-Ray diffraction (XRD) to check the thermal and crystallinity properties. Other than that, bioplastic made up from keratin with 2% of glycerol has the best mechanical and thermal properties. According to biodegradability test, all bioplastic produced are proven biodegradable. Therefore, the results showed possible application of the film as an alternative to fossil oil based materials which are harmful to the environment.
    Matched MeSH terms: Glycerol
  18. Chai JW, Lim SL, Kanthimathi MS, Kuppusamy UR
    Genes Nutr, 2011 May;6(2):181-8.
    PMID: 21484150 DOI: 10.1007/s12263-010-0196-4
    The nutraceutical benefits of β-sitosterol (SIT) are well documented. The present study investigated the in vitro effects of SIT on adipogenesis, glucose transport, and lipid mobilization in rat adipocytes. Primary cultures of rat preadipocytes and differentiated adipocytes were used in this study. Glucose uptake was measured by the uptake of radio-labeled glucose. Adipogenesis and lipolysis were measured by oil-red-O and glycerol quantification methods, respectively. The expression of protein kinase B (Akt), glucose transporter 4 (GLUT4), hormone sensitive lipase (HSL), and phosphatidylinositol-3-kinase (PI3 K) genes in SIT-treated adipocytes were assessed by real-time reverse transcription polymerase chain reaction (RT-PCR). The data showed that SIT induced glucose uptake in adipocytes. It also stimulated adipogenesis in differentiating preadipocytes. Interestingly, although SIT displayed general insulin-mimetic activity by stimulating glucose uptake and adipogenesis, it also induced lipolysis in adipocytes. Furthermore, the SIT-induced lipolysis was not attenuated by insulin and co-incubation of SIT with epinephrine improved epinephrine-induced lipolysis. GLUT4 gene expression was highly down-regulated in SIT-treated adipocytes, compared to insulin-treated adipocytes, which was up-regulated. Insulin- and SIT-treated adipocytes showed similar levels of Akt, HSL, and PI3 K gene down-regulation. These observations suggest that the elevation of glucose uptake in SIT-treated adipocytes was unrelated to de novo synthesis of GLUT4 and the SIT-induced lipolysis is associated with the down-regulation of Akt and PI3K genes. The unique effects of SIT on the regulation of glucose uptake, adipogenesis, and lipolysis in adipocytes show that it has potential to be utilized in diabetes and weight management.
    Matched MeSH terms: Glycerol
  19. Grindstaff KK, Fielding LA, Brodl MR
    Plant Physiol, 1996 Feb;110(2):571-581.
    PMID: 12226205
    The heat-shock responses of barley (Hordeum vulgare L. cv Hi- malaya) aleurone layers incubated with or without gibberellic acid (GA3) were compared. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis revealed that heat shock blocked the synthesis and secretion of secretory proteins from GA3-treated layers but not untreated layers. This suppression of secretory protein synthesis has been correlated with changes in endoplasmic reticulum (ER) membranes (F.C. Belanger, M. R. Brodl, T.-h.D. Ho [1986] Proc Natl Acad Sci USA 83: 1354-1358; L. Sticher, A.K. Biswas, D.S. Bush, R.L. Jones [1990] Plant Physiol 92: 506-513). Our secretion data suggested that the ER membranes of aleurone layers incubated without GA3 may be more heat shock tolerant. To investigate this, the lipid profiles of membrane extracts in aleurone layers labeled with [14C]glycerol were examined. Heat shock markedly increased [14C]glycerol incorporation into phosphatidylcholine (PC), and gas chromatography revealed an increase in the amount of saturated fatty acids associated with thin layer chromatography-purified PC in GA3-treated layers. In contrast, aleurone layers incubated without GA3 at normal temperature contained PC-associated fatty acids with a greater degree of saturation than GA3-treated layers. Heat shock modestly increased the degree of fatty acid saturation in untreated aleurone layers. This same trend was noted in fatty acids isolated from ER membranes purified by continuous sucrose density centrifugation. We propose that increased fatty acid saturation may help sustain ER membrane function in heat-shocked aleurone layers incubated in the absence of GA3.
    Matched MeSH terms: Glycerol
  20. Musa SH, Basri M, Masoumi HR, Karjiban RA, Malek EA, Basri H, et al.
    Colloids Surf B Biointerfaces, 2013 Dec 1;112:113-9.
    PMID: 23974000 DOI: 10.1016/j.colsurfb.2013.07.043
    Palm kernel oil esters nanoemulsion-loaded with chloramphenicol was optimized using response surface methodology (RSM), a multivariate statistical technique. Effect of independent variables (oil amount, lecithin amount and glycerol amount) toward response variables (particle size, polydispersity index, zeta potential and osmolality) were studied using central composite design (CCD). RSM analysis showed that the experimental data could be fitted into a second-order polynomial model. Chloramphenicol-loaded nanoemulsion was formulated by using high pressure homogenizer. The optimized chloramphenicol-loaded nanoemulsion response values for particle size, PDI, zeta potential and osmolality were 95.33nm, 0.238, -36.91mV, and 200mOsm/kg, respectively. The actual values of the formulated nanoemulsion were in good agreement with the predicted values obtained from RSM. The results showed that the optimized compositions have the potential to be used as a parenteral emulsion to cross blood-brain barrier (BBB) for meningitis treatment.
    Matched MeSH terms: Glycerol/chemistry
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links