Displaying publications 1 - 20 of 30 in total

Abstract:
Sort:
  1. Adi O, Via G, Salleh SH, Chuan TW, Rahman JA, Muhammad NAN, et al.
    Am J Emerg Med, 2021 Nov;49:385-392.
    PMID: 34271286 DOI: 10.1016/j.ajem.2021.06.031
    STUDY OBJECTIVE: To determine whether non-invasive ventilation (NIV) delivered by helmet continuous positive airway pressure (hCPAP) is non-inferior to facemask continuous positive airway pressure (fCPAP) in patients with acute respiratory failure in the emergency department (ED).

    METHODS: Non-inferiority randomized, clinical trial involving patients presenting with acute respiratory failure conducted in the ED of a local hospital. Participants were randomly allocated to receive either hCPAP or fCPAP as per the trial protocol. The primary endpoint was respiratory rate reduction. Secondary endpoints included discomfort, improvement in Dyspnea and Likert scales, heart rate reduction, arterial blood oxygenation, partial pressure of carbon dioxide (PaCO2), dryness of mucosa and intubation rate.

    RESULTS: 224 patients were included and randomized (113 patients to hCPAP, 111 to fCPAP). Both techniques reduced respiratory rate (hCPAP: from 33.56 ± 3.07 to 25.43 ± 3.11 bpm and fCPAP: from 33.46 ± 3.35 to 27.01 ± 3.19 bpm), heart rate (hCPAP: from 114.76 ± 15.5 to 96.17 ± 16.50 bpm and fCPAP: from 115.07 ± 14.13 to 101.19 ± 16.92 bpm), and improved dyspnea measured by both the Visual Analogue Scale (hCPAP: from 16.36 ± 12.13 to 83.72 ± 12.91 and fCPAP: from 16.01 ± 11.76 to 76.62 ± 13.91) and the Likert scale. Both CPAP techniques improved arterial oxygenation (PaO2 from 67.72 ± 8.06 mmHg to 166.38 ± 30.17 mmHg in hCPAP and 68.99 ± 7.68 mmHg to 184.49 ± 36.38 mmHg in fCPAP) and the PaO2:FiO2 (Partial pressure of arterial oxygen: Fraction of inspired oxygen) ratio from 113.6 ± 13.4 to 273.4 ± 49.5 in hCPAP and 115.0 ± 12.9 to 307.7 ± 60.9 in fCPAP. The intubation rate was lower with hCPAP (4.4% for hCPAP versus 18% for fCPAP, absolute difference -13.6%, p = 0.003). Discomfort and dryness of mucosa were also lower with hCPAP.

    CONCLUSION: In patients presenting to the ED with acute cardiogenic pulmonary edema or decompensated COPD, hCPAP was non-inferior to fCPAP and resulted in greater comfort levels and lower intubation rate.

    Matched MeSH terms: Head Protective Devices/standards*; Head Protective Devices/statistics & numerical data
  2. Ramli R, Che Man Z, Nordin R, Abdul Karim F, Rashdi MF, Oxley J, et al.
    Traffic Inj Prev, 2016 Sep;17 Suppl 1:79-85.
    PMID: 27586107 DOI: 10.1080/15389588.2016.1203428
    OBJECTIVE: Vietnamese spend hours travelling on the road using their motorcycles. Their helmets are exposed continuously to sunlight and rain. The objectives of this study were to determine the association between the effect of photo-oxidative degradation (POD) of the outer shells and helmet age on helmet damage. The micro-structural change of the outer shell was also investigated.

    METHODS: This was a prospective, cross sectional study recruiting injured motorcyclists from Hanoi, Vietnam hospital. The participants were interviewed by a trained researcher. The participants' helmets were collected post-crash. Initially, the helmets were examined for their type and external characteristics. A 3 cm × 3 cm cut was made on the helmet in the impacted and non-impacted areas (control). These areas were investigated for evidence of POD and presence of micro-cracks and material disintegration. 50 participants were enrolled. Sources of information included questionnaire and laboratory analyses. The helmet factors of interest were age of the helmet, exposure of helmet to sunlight and rain (duration/day) and history of previous impact. Laboratory analyses included Fourier Transform Infra Red (FTIR) for degradation and scanning electron microscopy (SEM) for micro-structural examination.

    RESULTS: Majority of the helmets was the open-face type, 40 (80.0%). 31 (62.0%) helmets aged less than three years (LTY) and 19 (38.0%) were three years old or more (MTY). 19 (61.3%) of the LTY helmets and 12 (63.2%) MTY helmets showed evidence of POD. The duration of helmet exposure to sunlight was between 93 to 6570 hours (mean 2347.74 hours; SD 1733.39). The SEM showed 15 helmets (30%) with micro-fractures, 21 helmets (42.0%) with material disintegration. Prolonged uv exposure to the ABS helmets resulted in changes in the helmet material in the form of material disintegration and microcracks and this association was statistically significant (p = 0.03).

    CONCLUSION: POD occurs due to routine exposure to the ultraviolet light. Prolonged uv exposure affects outer shell surface material integrity.

    Matched MeSH terms: Head Protective Devices/standards*
  3. Ooi SS, Wong SV, Yeap JS, Umar R
    Asia Pac J Public Health, 2011 Jul;23(4):608-19.
    PMID: 21768134 DOI: 10.1177/1010539511413750
    Motorcycle helmets have been proven to prevent head injury and reduce fatality in road crashes. However, certain studies indicate that the helmet increases the mass to the head, and thus the potential of neck injury due to the flexion/extension of the head-neck segment in a road crash may increase. This study was conducted to evaluate the effects of motorcycle helmets and the ways in which the accidents that occurred affected the incidence of cervical spine injury. Nevertheless, it is not intended to and does not discredit the fact that helmet use prevents many motorcyclists from sustaining serious and fatal head injuries. A total of 76 cases were collected and analyzed based on the data collected from real-world crashes. The Abbreviated Injury Scale (AIS) was used to assess the severity of injury, whereas the statistical Pearson χ(2) correlation method was used for analysis. The results showed that motorcycle helmets did not affect the severity of cervical spine injury. However, when the samples were further subcategorized into different crash modes, it was found that helmets affect the incidence of a severe cervical spine injury. In frontal collisions, the use of helmets significantly reduces the severity of cervical spine injury, whereas in rear-end, side impact, and skidded accidents, the use of helmets increases the probability of a severe cervical spine injury. However, in the latter crash modes, a motorcyclist without a helmet will have to trade-off with head injury. A logistic regression model has been developed with respective crash modes and the probabilities of risk in having severe cervical spine injury have been calculated. Future designs in motorcycle helmets should therefore consider the significance of nonfrontal accidents and the interaction of helmet with other parts of the body by possibly considering the weight of the helmet.
    Matched MeSH terms: Head Protective Devices/utilization*
  4. Nikmatin S, Hermawan B, Irmansyah I, Indro MN, Kueh ABH, Syafiuddin A
    Materials (Basel), 2018 Dec 22;12(1).
    PMID: 30583516 DOI: 10.3390/ma12010034
    The performance of helmet prototypes fabricated from acrylonitrile butadiene styrene composites filled with oil palm empty fruit bunch fibers was evaluated. The fibers were produced using a milling procedure, while the composites were fabricated using a single-screw extrusion. The physical characteristics of the produced fibers, which are water content, size, and density, were investigated. In addition, the mechanical properties of the produced helmets, including shock absorption, yield stress, frequency, and head injury criterion (HIC), were examined. The impact strength of the produced helmets increases with the rise of filler content. In addition, the helmets were also able to withstand a considerable pressure such that the transmitted pressure was far under the maximum value acceptable by the human skull. The present work also found that HICs exhibited by the investigated helmet prototypes fulfill all the practical guidelines as permitted by the Indonesian government. In terms of novelty, such innovation can be considered the first invention in Indonesia since the endorsement of the use of motorcycle helmets.
    Matched MeSH terms: Head Protective Devices
  5. Ramli R, Abdul Rahman R, Abdul Rahman N, Abdul Karim F, Krsna Rajandram R, Mohamad MS, et al.
    J Craniofac Surg, 2008 Mar;19(2):316-21.
    PMID: 18362705 DOI: 10.1097/SCS.0b013e318163f94d
    Motorcycle casualties represent significant number in road traffic accidents in Malaysia, and among all the injuries, facial injuries pose many significant problems physiologically, functionally, and aesthetically. The aim of this study was to analyze the pattern of maxillofacial as well as other injuries in motorcyclists who were seen at Hospital Universiti Kebangsaan Malaysia.Patients' records from January 2004 to December 2005 were reviewed. Data related to demographics, vehicle/object involved in collision, involvement as a rider or pillion, whether a helmet was worn or not, location of injuries on the face/facial bones, and other associated injuries were collected.A total of 113 cases of motorcycle accidents were recorded; 106 males and 7 females were involved. Mean age was 25.8 years. Among all the races, Malay had the highest involvement (72.3%), followed by Chinese (14.3%), Indians (8.9%), and others (5.4%). The types of collision were either a single-vehicle collision (i.e., skidded) or with another vehicle/s or object (e.g., tree, stone, or lamppost). The injuries were mainly seen on the lower face (46.9%) followed by midface (25.7%) and a combination of the midface and lower face (15%) and others (12.4%). The most frequent other associated injuries recorded were orthopedic and head injuries.
    Matched MeSH terms: Head Protective Devices/statistics & numerical data
  6. Mohd Naim Abdullah, Mustapha, F., Muda, M.K.H., Arrifin, M.K.A., Rafie, A.S.M., Shamsudin, M.A.
    Movement Health & Exercise, 2015;4(1):77-91.
    MyJurnal
    Finite Element Analysis (FEA) and Computational Fluid Dynamics (CFD) analysis were performed in this work in order to obtain the best design for safety and aerodynamic performance of the bicycle cycling helmet. FEA analysis was computed on two different helmet designs to determine the critical area subjected to impact. A pressure load was applied on the helmets’ outer surface to simulate oblique loading. The critical areas of the helmets were then highlighted and identified, enabling design improvements to be made on both designs. CFD analysis was then executed in order to obtain the lowest drag coefficient number in reducing the air resistance induced by both of the helmet designs, inherently increasing cyclist performance and ensuring competition success.
    Matched MeSH terms: Head Protective Devices
  7. Krishnan R, Cheng OT, Amar Singh HSS, Wong WY, Yip RCW, Shamini V
    Family Physician, 1996;9:17-22.
    Bicycle fatalities constituted 5% of road fatalities in 1995. A helmet, properly worn, is the most effective measure to prevent head injury to a cyclist in the event of a crash. We studied the knowledge, attitude and practice of children in two secondary schools (Ipoh and Kulim) with respect to bicycle helmet use before instituting a program for helmet use. Although there were no major differences in knowledge, attitude and practice of students in the two groups, children in the Ipoh program failed to wear helmets while the children in the Kulim program complied over a one year period. The main reason for failure of the helmet progranl in Ipoh were negative peer influence. The Kulim helmet program was integrated with a bicycle safety course conducted by dedicated teachers. The quasi experimental study resulted in increased awareness of the importance of bicycle helmets among school children in Kulim Keywords: Bicycle helmet, road traffic injury, prevention.
    Matched MeSH terms: Head Protective Devices
  8. Mohd Saman SA, Jothee S, Nor FM, Shafie MS
    Am J Forensic Med Pathol, 2021 Jun 01;42(2):141-146.
    PMID: 33346978 DOI: 10.1097/PAF.0000000000000639
    INTRODUCTION: In recent years, there has been a significant increase in mortality among motorcyclists, which warrants a need to analyze the epidemiology and pattern of injuries among road users in Malaysia. Hence, prioritizing road safety in the government policy by implementing targeted actions is justified to reduce injury and fatality.

    MATERIALS AND METHODS: Cases of road accident deaths in motorcyclists received by UKM Medical Centre were studied over a period of 10 years, that is, between 2010 and 2019. This study was based on forensic autopsy records database and forensic autopsy.

    RESULTS: The most affected age group by road fatalities were young men. The most common injuries were intracranial hemorrhage (74%), thoracic hemorrhage (73%), and lung laceration (85.7%). About 39 (31%) fatally injured riders were positive for illicit drug and/or alcohol.

    CONCLUSIONS: This study showed that men in the third decade of life are the major victims of motorcycle fatalities. Hence, urgent measures are necessary to establish road safety policy to reduce such fatalities.

    Matched MeSH terms: Head Protective Devices/statistics & numerical data
  9. Hyder AA, Waters H, Phillips T, Rehwinkel J
    Asia Pac J Public Health, 2007;19(2):16-22.
    PMID: 18050559
    This paper reviews economic evaluations of motorcycle helmet interventions in preventing injuries. A comprehensive literature review focusing on the effectiveness of motorcycle helmet use, and on mandatory helmet laws and their enforcement was done. When helmet laws were lifted between 1976-80, 48 states within the U.S.A. experienced a cost of $342,047 per excess fatality of annual net savings. Helmet laws in the USA had a benefit-cost ratio of 1.33 to 5.07. Taiwan witnessed a 14% decline in motorcycle fatalities and a 22% reduction of head injury fatalities with the introduction of a helmet law. In Thailand, where 70-90% of all crashes involve motorcycle, after enforcement of a helmet law, helmet-use increased five-fold, the number of injured motorcyclists decreased by 33.5%, head injuries decreased by 41.4%, and deaths decreased by 20.8%. There is considerable evidence that mandatory helmet laws with enforcement alleviate the burden of traffic injuries greatly. For low and middle-income countries with high rates of motorcycle injuries, enforced, mandatory motorcycle helmet laws are potentially one of the most cost-effective interventions available.
    Matched MeSH terms: Head Protective Devices/utilization*
  10. Abosadegh MM, Saddki N, Al-Tayar B, Rahman SA
    Biomed Res Int, 2019;2019:9024763.
    PMID: 30895196 DOI: 10.1155/2019/9024763
    Background/Aim: Epidemiology of maxillofacial fractures (MFF) varies between populations. This study investigated the epidemiology of MFF treated at the Oral and Maxillofacial Surgery (OMFS) Unit, Hospital Universiti Sains Malaysia (USM).

    Methods: A retrospective review of 473 medical records of patients with MFF treated from June 2013 to December 2015 was conducted. Information on demographic characteristics of patients, aetiology of injury, types of MFF, and treatment was obtained. Descriptive analysis, Pearson's chi-squared test, and multiple logistic regression analysis were conducted. The level of significance was set at 0.05.

    Results: Most patients treated for MFF were males (82.2%), aged 30 and below (63.1%), and from Malay ethnic (97.4%). Road traffic accident was the most common cause of MFF (83.1%), with motorcycle accident accounting for most injuries (73.6%). Orbital wall fracture was the most frequent MFF type (51.2%). About half of MFF patients (51.4%) were treated conservatively. Patients aged more than 20 years old were at higher odds of sustaining orbital wall fracture (AOR= 1.76; 95% CI: 1.214-2.558; P= 0.003) but were at lower odds of sustaining mandibular fracture (AOR= 0.47; 95% CI: 0.315-0.695; P= 0.001) than patients who are 20 years old and younger. Helmet use among motorcyclists was significantly associated with the nasal, orbital wall, and maxillary sinus wall fractures (P= 0.006, 0.010, and 0.004, respectively).

    Conclusion: Motorcycle accident was the most common cause of MFF in Kelantan, Malaysia. Ages of patient and helmet use were associated with the type of MFF sustained. This study provides important information to facilitate the planning of MFF prevention strategies among motorcyclists and emphasizes the importance of using a helmet when riding a motorcycle.

    Matched MeSH terms: Head Protective Devices
  11. Ramli R, Oxley JA
    Traffic Inj Prev, 2019;20(3):332-335.
    PMID: 30995129 DOI: 10.1080/15389588.2018.1557640
    Objectives: We encountered an unusual facial laceration wound in relation to motorcycle helmet visor use during our clinical practice. We aimed to assess the prevalence of this unusual facial injury among motorcyclists who sustained facial injuries in selected hospitals and to determine the possible mechanism involved. Methods: We used our prospective cross-sectional substudy involving injured motorcyclists presenting at major trauma hospitals in Southern Klang Valley, Malaysia, between March 2010 and March 2011. of 391 subjects with facial injuries, 2 male motorcyclists sustained this laceration. The wounds were assessed and we believed that each was associated with the helmet visor. One of the visors was collected and the edge was inspected using scanning electron microscopy (SEM). Results: The prevalence of this unusual injury was 0.51% (95% confidence interval, 0.002-0.012) among motorcyclists who sustained facial injuries. Both cases were involved in a head-on collision with their colliding partners and their helmets were intact throughout the crash. The visor in case 1 was intact, but the visor in case 2 was broken. SEM analysis showed that the visor in case 1 had a potential cutting surface. We postulated that with helmet rotation in the forward and downward position and with some degree of visor bending or with a dislodged visor, the sharp-edged visor could potentially severely lacerate the face. Conclusion: This injury affects facial aesthetics and early referral to the facial surgery team is advocated. Documentation of the mechanism of injury, the patient's helmet and visor is obligatory, so that this information can be delivered to the regional road safety authority for preventive measures.
    Matched MeSH terms: Head Protective Devices
  12. Ramli R, Oxley J
    Injury, 2016 Nov;47(11):2442-2449.
    PMID: 27645615 DOI: 10.1016/j.injury.2016.09.022
    INTRODUCTION: In Malaysia, motorcyclists continue to outnumber other road users in injuries and deaths. The objective of this study was to determine the association between helmet fixation and helmet type with head injury and severity of head injury among Malaysian motorcyclists.

    METHODS: The study design was a prospective cross-sectional study. The participants involved injured motorcyclists who were admitted in five selected hospitals in Klang Valley, Malaysia. Participants who sustained head injury were selected as the cases while those with injury below the neck (IBN) were selected as the controls. Questionnaire comprising motorcyclist, vehicle, helmet and crash factors was examined. Diagnoses of injuries were obtained from the participants' medical records.

    RESULTS: The total subjects with head injuries were 404 while those with IBN were 235. Majority of the cases (76.2%) and controls (80.4%) wore the half-head and open-face helmets, followed by the tropical helmets (5.4% and 6.0% of the cases and controls, respectively). Full-face helmets were used by 1.2% of the cases and 4.7% of the controls. 5.7% of the cases and 6.0% of the controls did not wear a helmet. 32.7% of the cases and 77.4% of the controls had their helmets fixed. Motorcyclists with ejected helmets were five times as likely to sustain head injury [adjusted odds ratio, AOR 5.73 (95% CI 3.38-9.73)] and four times as likely to sustain severe head injury [AOR of 4.83 (95% CI 2.76-8.45)]. The half head and open face helmets had AOR of 0.24 (95% CI 0.10-0.56) for severe head injury when compared to motorcyclists who did not wear a helmet.

    CONCLUSION: Helmet fixation is more effective than helmet type in providing protection to the motorcyclists.

    Matched MeSH terms: Head Protective Devices/adverse effects; Head Protective Devices/utilization*
  13. Nurzuhairiza Zolkifli, Shamsul Bahri Mohd Tamrin, Ng Yee Guan, Nur Shuhada Mohd Shukoor, Nur Fitriyah Md Akir, Ng Gin Siong, et al.
    MyJurnal
    Safety helmet become vital personal protective equipment especially in the plantation in preventing the head from injury. This study evaluate the knowledge, attitude and practice on safety helmet usage among harvesters, the association between knowledge, attitude and practice of safety helmet usage with head injury; and the significant differences of the safety helmet practices before and after the intervention. A cross-sectional study was conducted among 109 harvesters in two oil palm plantation located in Selangor, Malaysia. A set of questionnaire was used to collect the socio demographic background data, knowledge, attitude and practice on the usage of safety helmet. An intervention program through tool box talk on proper usage of safety helmet also was given followed by an observation to look for the differences before and after the tool box promotion on the use of safety helmet. Result from the descriptive analysis showed high score for knowledge, fair score for the attitude and practice among harvesters. There is no association between knowledge (X2=2.733; p>0.05), attitude (X2=2.546; p>0.05) and practice (X2=2.473; p>0.05) with the head injury. The result also gave no significant differences (p>0.05) of the practices before and after the intervention. However, the trends showed decrease in number of practices after the intervention. This study reveals that the knowledge, attitude and practice are not a prominent indicator for head injury among harvesters.
    Matched MeSH terms: Head Protective Devices
  14. Kulanthayan S, See LG, Kaviyarasu Y, Nor Afiah MZ
    Injury, 2012 May;43(5):653-9.
    PMID: 21764054 DOI: 10.1016/j.injury.2011.06.197
    BACKGROUND: Almost half of the global traffic crashes involve vulnerable groups such as pedestrian, cyclists and two-wheeler users. The main objective of this study was to determine the factors that influence standard of the safety helmets used amongst food delivery workers by presence of Standard and Industrial Research Institute of Malaysia (SIRIM) certification label.
    METHODS: A cross sectional study was conducted amongst 150 food delivery workers from fast food outlets in the vicinity of Selangor and Kuala Lumpur. During observation, safety helmets were classified as standard safety helmet in the presence of SIRIM label and non-standard in the absence of the label. They were approached for questionnaire participation once consent was obtained and were requested to exchange their safety helmet voluntarily with a new one after the interview. Data analysis was carried out using SPSS. Chi square and logistic regression analysis was applied to determine the significance and odds ratio of the variables studied, respectively (penetration test, age, education level, knowledge, crash history, types of safety helmet, marital status and years of riding experience) against the presence of SIRIM label.
    RESULTS: The response rate for this study was 85.2%. The prevalence of non-standard helmets use amongst fast food delivery workers was 55.3%. Safety helmets that failed the penetration test had higher odds of being non-standard helmets compared with safety helmets passing the test. Types of safety helmet indicated half-shell safety helmets had higher odds to be non-standard safety helmets compared to full-shell safety helmets. Riders with more years of riding experience were in high odds of wearing non-standard safety helmets compared to riders with less riding experience.
    CONCLUSION: Non-standard (non-SIRIM approved) helmets were more likely to be half-shell helmets, were more likely to fail the standards penetration test, and were more likely to be worn by older, more experienced riders. The implications of these findings are discussed.
    Matched MeSH terms: Head Protective Devices/standards*; Head Protective Devices/utilization*
  15. Nur Al - Izzah binti Nazri, Shamsul Bahri Mohd Tamrin, Dayana Hazwani Mohd Suadi Nata, Ng Yee Guan
    MyJurnal
    Introduction: Safety helmets are one of the personal protective equipment (PPE) that to decrease the impact of any falling object to the skull and to avoid head and brain injury by many industries, including palm oil plantation. Nev- ertheless, the level on the usage of the current safety helmet is very low due to a few factors that lead to the discom- fort. Among the common issues for the non-compliance of safety helmets are their discomfort, ventilation, weight and safety. This study aims to determine subjective preference of the new prototypes’ safety helmets device among palm oil plantation harvesters. Methods: A cross-sectional study conducted among 124 harvesters in three palm oil plantations located in Sabah, Malaysia. A set of questionnaires used to collect data on their socio-demographic background, perceptions toward existing safety helmets and their subjective preference of new safety helmets pro- totypes. Apart from that, six harvesters were randomly choosing to attend an interview session for qualitative study. Results: The descriptive analysis indicate that among the emphasized issues regarding non-compliance of existing safety helmet were due to discomfort (66.1%), poor ventilation (97.6%), load of safety helmet (83.3%) and safety issues (68.5%). In terms of new safety helmets prototypes, 72.6% of the harvesters preferred Design C to be worn for work in the plantation. Conclusion: It can be suggested that the existing safety helmet is uncomfortable and was not design ergonomically namely loose size and discomfort. Design C was the most preferred to be worn for work in the palm oil plantation.
    Matched MeSH terms: Head Protective Devices
  16. Oxley J, Yuen J, Ravi MD, Hoareau E, Mohammed MA, Bakar H, et al.
    Ann Adv Automot Med, 2014 1 11;57:45-54.
    PMID: 24406945
    In Malaysia, two-thirds of reported workplace-related fatal and serious injury incidents are the result of commuting crashes (especially those involving motorcyclists), however, little is known about the contributing factors to these collisions. A telephone survey of 1,750 motorcyclists (1,004 adults who had been involved in a motorcycle commuting crash in the last 2 years and 746 adult motorcyclists who had not been involved in a motorcycle crash in the last 2 years) was undertaken. The contributions of a range of behavioural, attitudinal, employment and travel pattern factors to collision involvement were examined. The findings revealed that the majority of participants were licensed riders, rode substantial distances (most often for work purposes), and reported adopting safe riding practices (helmet wearing and buckling). However, there were some concerning findings regarding speeding behaviour, use of mobile phones while riding, and engaging in other risky behaviours. Participants who had been involved in a collision were younger (aged 25-29 years), had higher exposure (measured by distances travelled, frequency of riding, and riding on high volume and higher speed roads), reported higher rates of riding for work purposes, worked more shift hours and had a higher likelihood of riding at relatively high speeds compared with participants who had not been involved in a collision. Collisions generally occurred during morning and early evening hours, striking another vehicles, and during normal traffic flow. The implications of these findings for policy decisions and development of evidence-based behavioural/training interventions addressing key contributing factors are discussed.
    Matched MeSH terms: Head Protective Devices
  17. Mohd Shukoor NS, Mohd Tamrin SB, Guan NY, Mohd Suadi Nata DH
    Work, 2018;60(1):129-134.
    PMID: 29843301 DOI: 10.3233/WOR-182741
    BACKGROUND: Hard hats are among the personal protective equipment (PPE) used in many industries to reduce the impact of any falling object on the skull and also to prevent head and brain injuries. However, the practice of wearing a safety helmet during working hours is still low. This is due to the physical discomfort perceived by safety helmet users.

    OBJECTIVE: Given the unpopularity of the current hard hat, the general perception of workers concerning its use and its measurements are the determining factors in the development of a new hard hat.

    METHOD: A cross-sectional study was conducted in which 132 male oil palm harvesters between 19 and 60 years of age were selected from among the employees of the same oil palm harvesting company. A set of questionnaires was developed to collect their socio-demographic information as well as their perceptions of comfort and the prevalence of head injury. In addition, a set of measuring instruments, including Martin's anthropometry set, was used for head measurement and data collection in respect of the current hard hat. In this research, six respondents were randomly selected to attend an interview session for qualitative assessment.RESULTSBased on the questionnaires, the unpopularity in the use of the hard hat was largely influenced by factors related to poor design, in general, and, specifically, poor ventilation (64%), load (67% ), and physical discomfort (42% ). The measurements of the anthropometric parameters and the dimensions of the hard hat also showed a significant mismatch.

    CONCLUSION: The unpopularity of the current hard hat among oil palm harvesters stemmed from the discomfort from wearing, which showed that the development of a new hard hat could lead to better usage and the greater likelihood of wearing a hard hat throughout the working day.

    Matched MeSH terms: Head Protective Devices/statistics & numerical data*
  18. Suzilawati Mohamed Ariffin, Mimi Nor Aliza Setapani
    MyJurnal
    Malaysia has the highest road fatality risk (per 100,000 populations) compared to other ASEAN nations and more than 50% of the road accident fatalities involving motorcyclists. Hence, this becomes the leading cause of death among young people, aged 15–29 years. The most common cause of fatalities involving motorcyclist is the head injury., This present study aimed to evaluate the knowledge, attitude, and practice on helmet usage among secondary school students in Kuantan. A descriptive cross-sectional design (two months of data collection) was used in this study. Questionnaires were distributed to 200 participants from two schools in Kuantan. The main finding of this study suggests that common reason for the participants to wear a helmet is that ‘it can save a life’. Besides that, the poor practice regarding helmet usage was also found as only 4.5% of them wore the helmet all the time. However, the overall result showed that most of the participants have a good knowledge and positive attitude regarding utilization of helmet.
    Matched MeSH terms: Head Protective Devices
  19. Yellappan K, K C Mani K, Md Tamrin SB
    Traffic Inj Prev, 2019;20(6):624-629.
    PMID: 31329467 DOI: 10.1080/15389588.2019.1626985
    Objective: The objective of this study was to determine the proportion of motorcycle safety helmets (MSHs) used by postal delivery riders (PDRs) that comply with the Standards and Industrial Research Institute of Malaysia's (SIRIM) MSH standard guidelines and identify factors that contribute toward compliance of used MSHs with the standards. Methods: The presence of SIRIM certification label, the status of MSH, type of chinstrap, MSH crash history, and duration of MSH use were observed. The dependent variable was the results of the SIRIM testing procedures (SIRIM tests). MSHs that passed the SIRIM tests were considered "standard certified" MSHs. Results: The odds of the complimentary MSHs passing all of the SIRIM tests were 3.7 times the odds of the self-purchased MSHs passing the tests. The odds of MSHs with the SIRIM certification label passing all of the SIRIM tests were 24.2 times the odds of MSHs without the SIRIM certification label, and the odds of MSHs used <3 years passing the SIRIM tests were 3.75 times the odds of the MSHs used ≥3.8 years. Conclusion: PDRs provided with complimentary MSHs with the SIRIM certification label by the employer for their daily delivery routines and duration of MSH used for less than 3 years were found to be safe MSHs for male occupational riders in Malaysia.
    Matched MeSH terms: Head Protective Devices/standards*
  20. Ramli R, Oxley J, Hillard P, Mohd Sadullah AF, McClure R
    BMC Emerg Med, 2014;14:17.
    PMID: 25086638 DOI: 10.1186/1471-227X-14-17
    The effectiveness of helmets in reducing the risk of severe head injury in motorcyclists who were involved in a crash is well established. There is limited evidence however, regarding the extent to which helmets protect riders from facial injuries. The objective of this study was to determine the effect of helmet type, components and fixation status on the risk of facial injuries among Malaysian motorcyclists.
    Matched MeSH terms: Head Protective Devices*
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links