Displaying publications 1 - 20 of 175 in total

Abstract:
Sort:
  1. Feedforward backpropagation, Genetic Algorithm approaches for predicting reference evapotranspiration
    Shafika Sultan Abdullah, M.A. Malek, Namiq Sultan Abdullah, A. Mustapha
    Sains Malaysiana, 2015;44:1053-1059.
    Water scarcity is a global concern, as the demand for water is increasing tremendously and poor management of water resources will accelerates dramatically the depletion of available water. The precise prediction of evapotranspiration (ET), that consumes almost 100% of the supplied irrigation water, is one of the goals that should be adopted in order to avoid more squandering of water especially in arid and semiarid regions. The capabilities of feedforward backpropagation neural networks (FFBP) in predicting reference evapotranspiration (ET0) are evaluated in this paper in comparison with the empirical FAO Penman-Monteith (P-M) equation, later a model of FFBP+Genetic Algorithm (GA) is implemented for the same evaluation purpose. The study location is the main station in Iraq, namely Baghdad Station. Records of weather variables from the related meteorological station, including monthly mean records of maximum air temperature (Tmax), minimum air temperature (Tmin), sunshine hours (Rn), relative humidity (Rh) and wind speed (U2), from the related meteorological station are used in the prediction of ET0 values. The performance of both simulation models were evaluated using statistical coefficients such as the root of mean squared error (RMSE), mean absolute error (MAE) and coefficient of determination (R2). The results of both models are promising, however the hybrid model shows higher efficiency in predicting ET0 and could be recommended for modeling of ET0 in arid and semiarid regions.
    Matched MeSH terms: Humidity
  2. Fulltext A small and slim coaxial probe for single rice grain moisture sensing
    You KY, Mun HK, You LL, Salleh J, Abbas Z
    Sensors (Basel), 2013;13(3):3652-63.
    PMID: 23493127 DOI: 10.3390/s130303652
    A moisture detection of single rice grains using a slim and small open-ended coaxial probe is presented. The coaxial probe is suitable for the nondestructive measurement of moisture values in the rice grains ranging from from 9.5% to 26%. Empirical polynomial models are developed to predict the gravimetric moisture content of rice based on measured reflection coefficients using a vector network analyzer. The relationship between the reflection coefficient and relative permittivity were also created using a regression method and expressed in a polynomial model, whose model coefficients were obtained by fitting the data from Finite Element-based simulation. Besides, the designed single rice grain sample holder and experimental set-up were shown. The measurement of single rice grains in this study is more precise compared to the measurement in conventional bulk rice grains, as the random air gap present in the bulk rice grains is excluded.
    Matched MeSH terms: Humidity*
  3. Evaluation of thermochemical pretreatment and continuous thermophilic condition in rice straw composting process enhancement
    Hosseini SM, Abdul Aziz H
    Bioresour Technol, 2013 Apr;133:240-7.
    PMID: 23428821 DOI: 10.1016/j.biortech.2013.01.098
    The effects of thermochemical pretreatment and continuous thermophilic conditions on the composting of a mixture of rice straw residue and cattle manure were investigated using a laboratory-scale composting reactor. Results indicate that the composting period of rice straw can be shortened to less than 10 days by applying alkali pre-treatment and continuous thermophilic composting conditions. The parameters obtained on day 9 of this study are similar to the criteria level published by the Canadian Council of Ministers of the Environment. The moisture content, organic matter reduction, pH level, electrical conductivity, total organic carbon reduction, soluble chemical oxygen demand reduction, total Kjeldahl nitrogen, carbon-to-nitrogen ratio, and germination index were 62.07%, 16.99%, 7.30%, 1058 μS/cm, 17.00%, 83.43%, 2.06%, 16.75%, and 90.33%, respectively. The results of this study suggest that the application of chemical-biological integrated processes under thermophilic conditions is a novel method for the rapid degradation and maturation of rice straw residue.
    Matched MeSH terms: Humidity
  4. Fulltext Effect of postharvest storage of whole fruit on physico-chemical and microbial changes of fresh-cut cantaloupe (Cucumis melo L. reticulatus cv. Glamour)
    Zainal Abidin, M., Shamsudin, R., Othman, Z., Abdul Rahman, R.
    International Food Research Journal, 2013;20(2):953-960.
    MyJurnal
    Cantaloupes continue to ripen after harvesting which is caused by ethylene production due to climacteric behaviour during postharvest storage. In this study, the cantaloupe fruits harvested at commercial maturity were evaluated for quality attributes during three weeks of storage at 10°C and a relative humidity (RH) of 90±5%. In addition, fresh-cut samples were stored for a further 19 days at 2°C and 87% RH. The fresh-cut samples were prepared on a weekly basis by dipping into deionised water (control) at 2°C for 1 minute. The effect of postharvest storage of cantaloupe on the physico-chemical properties and microbial activity was observed prior to fresh-cut processing. It was found that firmness, luminosity (L*), and titratable acidity (TA) decreased, while total soluble solids (TSS), pH, TSS:TA ratio, microbial activity (total plate count (TPC) and yeast and mould (YM)) of the fresh-cut increased over the postharvest storage period of the fruit. Meanwhile, the orange colour and the intensity (hue angle, hab, and chromaticity) of the flesh did not differ significantly during storage. The cantaloupe stored for three weeks at a low temperature indicated a successful potential for fresh-cut processing due to good maintenance of the product quality.
    Matched MeSH terms: Humidity
  5. Fulltext Development of an edible coating based on chitosan-glycerol to delay ‘Berangan’ banana (Musa sapientum cv. Berangan) ripening process
    Jafarizadeh Malmiri, H., Osman, A., Tan, C.P., Abdul Rahman, R.
    International Food Research Journal, 2011;18(3):-.
    MyJurnal
    Response surface methodology (RSM) was used to optimize the concentrations of chitosan and glycerol for coating Berangan banana (Musa sapientum cv. Berangan). The effects of main edible coating components, chitosan (0.5-2.5%, w/w) and glycerol (0-2%, w/w) on weight loss, firmness, total colour difference, total soluble solids content (TSS) and titratable acidity (TA) of coated banana were studied during 10 days of storage at 26±2°C and 40-50% relative humidity. Results showed that the experimental data could be adequately fitted into a second-order polynomial model with coefficient of determination (R 2 ) ranging from 0.745 to 0.930 for all the variables studied. In general, the chitosan concentration appeared to be the most significant (P< 0.1) factor influencing all variables except for TSS. The optimum concentration of chitosan and glycerol were predicted to be 2.02% and 0.18%, respectively. Statistical assessment showed insignificant difference between experimental and predicted values.
    Matched MeSH terms: Humidity
  6. Fulltext Corn Starch (Zea mays) Biopolymer Plastic Reaction in Combination with Sorbitol and Glycerol
    Hazrol MD, Sapuan SM, Zainudin ES, Zuhri MYM, Abdul Wahab NI
    Polymers (Basel), 2021 Jan 12;13(2).
    PMID: 33445740 DOI: 10.3390/polym13020242
    The research included corn starch (CS) films using sorbitol (S), glycerol (G), and their combination (SG) as plasticizers at 30, 45, and 60 wt %, with a traditional solution casting technique. The introduction of plasticizer to CS film-forming solutions led to solving the fragility and brittleness of CS films. The increased concentration of plasticizers contributed to an improvement in film thickness, weight, and humidity. Conversely, plasticized films reduced their density and water absorption, with increasing plasticizer concentrations. The increase in the amount of the plasticizer from 30 to 60% showed a lower impact on the moisture content and water absorption of S-plasticized films. The S30-plasticized films also showed outstanding mechanical properties with 13.62 MPa and 495.97 MPa, for tensile stress and tensile modulus, respectively. Glycerol and-sorbitol/glycerol plasticizer (G and SG) films showed higher moisture content and water absorption relative to S-plasticized films. This study has shown that the amount and type of plasticizers significantly affect the appearances, physical, morphological, and mechanical properties of the corn starch biopolymer plastic.
    Matched MeSH terms: Humidity
  7. Optimization of air-borne butyl acetate adsorption on dual-function Ag-Y adsorbent-catalyst using response surface methodology
    Bhatia S, Wong CT, Abdullah AZ
    J Hazard Mater, 2009 May 30;164(2-3):1110-7.
    PMID: 18976860 DOI: 10.1016/j.jhazmat.2008.09.040
    The low concentration and high flow rate of air-borne butyl acetate (BA) could be effectively removed using combined adsorption-catalytic oxidation system. Ag-Y (Si/Al=80) dual-function adsorbent was investigated for the adsorption step of 1000 ppm of butyl acetate at gas hourly space velocity of 13,000 h(-1) at ambient temperature under dry and humid feeds. A central composite design (CCD) coupled with response surface methodology (RSM) was employed to obtain the optimum process conditions and the interactions between process variables were demonstrated and elucidated. Humidity and increasing organic concentration shortened the adsorption service time. The effect of moisture was more pronounced at low BA concentration. The interactions between the BA concentration and humidity were statistically significant at 95% confidence level. The optimum conditions were found to be at 4500 ppm of BA with 37 min saturation time to give 58 mg BA/g as adsorption capacity. The simulated data fitted the experimental data satisfactorily. The simulated data also correctly demonstrated the overall behaviors of the adsorption process.
    Matched MeSH terms: Humidity
  8. Fulltext Response to dietary supplementation of L-glutamine and L-glutamate in broiler chickens reared at different stocking densities under hot, humid tropical conditions
    Shakeri M, Zulkifli I, Soleimani AF, O'Reilly EL, Eckersall PD, Anna AA, et al.
    Poult Sci, 2014 Nov;93(11):2700-8.
    PMID: 25143595 DOI: 10.3382/ps.2014-03910
    A study was conducted to determine whether supplementing AminoGut (a commercial dietary supplement containing a mixture of l-glutamine and l-glutamic acid) to broiler chickens stocked at 2 different densities affected performance, physiological stress responses, foot pad dermatitis incidence, and intestinal morphology and microflora. A randomized design in a factorial arrangement with 4 diets [basal diet, basal diet + 0.5% AminoGut from d 1 to 21, basal diet + 0.5% AminoGut from d 1 to 42, and basal diet + virginiamycin (0.02%) for d 1 to 42] and 2 stocking densities [0.100 m(2)/bird (23 birds/pen; LD) or 0.067 m(2)/bird (35 birds/pen; HD)]. Results showed that villi length and crypt depth were not changed by different dietary treatments. However, birds in the HD group had smaller villi (P = 0.03) compared with those of the LD group. Regardless of diet, HD consistently increased the serum concentrations of ceruloplasmin, α-1 acid glycoprotein, ovotransferin, and corticosterone (P = 0.0007), and elevated heterophil to lymphocyte ratio (0.0005). Neither AminoGut supplementation nor stocking density affected cecal microflora counts. In conclusion, under the conditions of this study, dietary supplementation of AminoGut, irrespective of stocking density, had no beneficial effect on growth performance, intestinal morphology, and physiological adaptive responses of broiler chickens raised under hot and humid tropical conditions. However, AminoGut supplementation from d 1 to 42 was beneficial in reducing mortality rate. Also, the increased serum concentrations of a wide range of acute phase proteins together with elevated corticosterone and heterophil to lymphocyte ratio suggested that high stocking density induced an acute phase response either indirectly as a result of increased incidence of inflammatory diseases such as foot pad dermatitis or possibly as a direct physiological response to the stress of high stocking density.
    Matched MeSH terms: Humidity*
  9. Fulltext Synthesis and Characterizations of Novel Ca-Mg-Ti-Fe-Oxides Based Ceramic Nanocrystals and Flexible Film of Polydimethylsiloxane Composite with Improved Mechanical and Dielectric Properties for Sensors
    Tripathy A, Pramanik S, Manna A, Shah NF, Shasmin HN, Radzi Z, et al.
    Sensors (Basel), 2016;16(3):292.
    PMID: 26927116 DOI: 10.3390/s16030292
    Armalcolite, a rare ceramic mineral and normally found in the lunar earth, was synthesized by solid-state step-sintering. The in situ phase-changed novel ceramic nanocrystals of Ca-Mg-Ti-Fe based oxide (CMTFOx), their chemical reactions and bonding with polydimethylsiloxane (PDMS) were determined by X-ray diffraction, infrared spectroscopy, and microscopy. Water absorption of all the CMTFOx was high. The lower dielectric loss tangent value (0.155 at 1 MHz) was obtained for the ceramic sintered at 1050 °C (S1050) and it became lowest for the S1050/PDMS nanocomposite (0.002 at 1 MHz) film, which was made by spin coating at 3000 rpm. The excellent flexibility (static modulus ≈ 0.27 MPa and elongation > 90%), viscoelastic property (tanδ = E″/E': 0.225) and glass transition temperature (Tg: -58.5 °C) were obtained for S1050/PDMS film. Parallel-plate capacitive and flexible resistive humidity sensors have been developed successfully. The best sensing performance of the present S1050 (3000%) and its flexible S1050/PDMS composite film (306%) based humidity sensors was found to be at 100 Hz, better than conventional materials.
    Matched MeSH terms: Humidity
  10. Fulltext Design and Development for Capacitive Humidity Sensor Applications of Lead-Free Ca,Mg,Fe,Ti-Oxides-Based Electro-Ceramics with Improved Sensing Properties via Physisorption
    Tripathy A, Pramanik S, Manna A, Bhuyan S, Azrin Shah NF, Radzi Z, et al.
    Sensors (Basel), 2016 Jul 21;16(7).
    PMID: 27455263 DOI: 10.3390/s16071135
    Despite the many attractive potential uses of ceramic materials as humidity sensors, some unavoidable drawbacks, including toxicity, poor biocompatibility, long response and recovery times, low sensitivity and high hysteresis have stymied the use of these materials in advanced applications. Therefore, in present investigation, we developed a capacitive humidity sensor using lead-free Ca,Mg,Fe,Ti-Oxide (CMFTO)-based electro-ceramics with perovskite structures synthesized by solid-state step-sintering. This technique helps maintain the submicron size porous morphology of the developed lead-free CMFTO electro-ceramics while providing enhanced water physisorption behaviour. In comparison with conventional capacitive humidity sensors, the presented CMFTO-based humidity sensor shows a high sensitivity of up to 3000% compared to other materials, even at lower signal frequency. The best also shows a rapid response (14.5 s) and recovery (34.27 s), and very low hysteresis (3.2%) in a 33%-95% relative humidity range which are much lower values than those of existing conventional sensors. Therefore, CMFTO nano-electro-ceramics appear to be very promising materials for fabricating high-performance capacitive humidity sensors.
    Matched MeSH terms: Humidity
  11. Fulltext Power Reduction with Sleep/Wake on Redundant Data (SWORD) in a Wireless Sensor Network for Energy-Efficient Precision Agriculture
    Jawad HM, Nordin R, Gharghan SK, Jawad AM, Ismail M, Abu-AlShaeer MJ
    Sensors (Basel), 2018 Oct 13;18(10).
    PMID: 30322176 DOI: 10.3390/s18103450
    The use of wireless sensor networks (WSNs) in modern precision agriculture to monitor climate conditions and to provide agriculturalists with a considerable amount of useful information is currently being widely considered. However, WSNs exhibit several limitations when deployed in real-world applications. One of the challenges faced by WSNs is prolonging the life of sensor nodes. This challenge is the primary motivation for this work, in which we aim to further minimize the energy consumption of a wireless agriculture system (WAS), which includes air temperature, air humidity, and soil moisture. Two power reduction schemes are proposed to decrease the power consumption of the sensor and router nodes. First, a sleep/wake scheme based on duty cycling is presented. Second, the sleep/wake scheme is merged with redundant data about soil moisture, thereby resulting in a new algorithm called sleep/wake on redundant data (SWORD). SWORD can minimize the power consumption and data communication of the sensor node. A 12 V/5 W solar cell is embedded into the WAS to sustain its operation. Results show that the power consumption of the sensor and router nodes is minimized and power savings are improved by the sleep/wake scheme. The power consumption of the sensor and router nodes is improved by 99.48% relative to that in traditional operation when the SWORD algorithm is applied. In addition, data communication in the SWORD algorithm is minimized by 86.45% relative to that in the sleep/wake scheme. The comparison results indicate that the proposed algorithms outperform power reduction techniques proposed in other studies. The average current consumptions of the sensor nodes in the sleep/wake scheme and the SWORD algorithm are 0.731 mA and 0.1 mA, respectively.
    Matched MeSH terms: Humidity
  12. Seasonality of Anopheles aconitus mosquitoes, a secondary vector of malaria, in an endemic village near the Malaysia-Thailand border
    Rahman WA, Abu Hassan A, Adanan CR
    Acta Trop, 1993 Dec;55(4):263-5.
    PMID: 8147283
    Matched MeSH terms: Humidity
  13. Dancing to death: A case of heat stroke
    Nadesan K, Kumari C, Afiq M
    J Forensic Leg Med, 2017 Aug;50:1-5.
    PMID: 28651196 DOI: 10.1016/j.jflm.2017.05.008
    Heat stroke is a medical emergency which may lead to mortality unless diagnosed early and treated effectively. Heat stroke may manifest rapidly, hence making it difficult to differentiate it from other clinical causes in a collapsed victim.(1) We are presenting a case report of twelve patients who were admitted to our emergency department from a music festival held on 13-15th of March 2014. They developed complications arising from a combination of severe adverse weather condition, prolonged outdoor physical exertion due to long hours of dancing and drug-use, resulting in heat stroke. Three of them died while the remaining patients survived. Their condition was initially misdiagnosed as a classical illicit drug overdose. This was based on the history of drug ingestion by some of the patients who attended the music festival on that day. The information in this case report aims, to create awareness amongst members of the medical team on duty in outdoor events, pre hospital responders and ED physicians when treating and managing similar cases in the future. In addition it is intended to warn the organizers of such events to take adequate precautions to avoid such tragedies in the future.
    Matched MeSH terms: Humidity
  14. Fulltext Saprophytic yeasts: effective biocontrol agents against Aspergillus flavus
    Afsah-Hejri, L.
    International Food Research Journal, 2013;20(6):3403-3409.
    MyJurnal
    Aflatoxins are carcinogenic, mutagenic and teratogenic fungal toxins predominantly produced by Aspergillus flavus (A. flavus) and Aspergillus parasiticus (A. parasiticus). Members of the Aspergillus family are wound-invading pathogens that can infect pistachio trees and nuts. The pistachio nut is a favorite tree nut worldwide, and more than half of the world’s pistachio production is from Iran. Pistachio nuts can easily be infected with Aspergillus spp. due to early splitting or due to animal, insect or physical damage. Any established infection of Aspergillus under high relative humidity and temperature results in the production and rapid accumulation of aflatoxins in pistachio nuts. It is impractical to remove aflatoxins from pistachio nuts after they are produced. Some microorganisms (such as saprophytic yeasts) have been reported to have an antagonistic effect against Aspergillus spp. This study aimed to isolate saprophytic yeasts from pistachio fruits and leaves and investigate their biocontrol activities against a toxigenic strain of Aspergillus flavus (A. flavus). Saprophytic yeasts were identified based on their morphological properties and biochemical tests. In total, 24 yeast isolates were obtained from pistachio fruits and leaves, and their antagonistic effect on A. flavus (PTCC 5006) was investigated. Five saprophytic yeast isolates, displaying the highest biocontrol activities against A. flavus (PTCC 5006), were identified as Pseudozyma fusiformata, Cryptococcus albidus, Rhodotorula fragaria, Cryptococcus hungaricus and Rhodotorula hinula. The biocontrol activities of these yeast isolates were evaluated by their inhibitory effects on sporulation, colony expansion, biomass production and prevention of aflatoxin B1 (AFB1) production. Pseudozyma fusiformata was the most effective yeast isolate in terms of spore reduction (84.6%) and inhibition of AFB1 production (89.1%). Cryptococcus albidus produced the maximum reduction in fungal dry weight (77.9%). Based on these results, isolated saprophytic yeasts from pistachio fruits and leaves can be used as effective biocontrol agents against the growth of Aspergillus and aflatoxin production.
    Matched MeSH terms: Humidity
  15. Fulltext All-optical graphene oxide humidity sensors
    Lim WH, Yap YK, Chong WY, Ahmad H
    Sensors (Basel), 2014;14(12):24329-37.
    PMID: 25526358 DOI: 10.3390/s141224329
    The optical characteristics of graphene oxide (GO) were explored to design and fabricate a GO-based optical humidity sensor. GO film was coated onto a SU8 polymer channel waveguide using the drop-casting technique. The proposed sensor shows a high TE-mode absorption at 1550 nm. Due to the dependence of the dielectric properties of the GO film on water content, this high TE-mode absorption decreases when the ambient relative humidity increases. The proposed sensor shows a rapid response (<1 s) to periodically interrupted humid air flow. The transmission of the proposed sensor shows a linear response of 0.553 dB/% RH in the range of 60% to 100% RH.
    Matched MeSH terms: Humidity
  16. Fulltext Analysis of fill time and injection pressure of multiple 20 gram Parisons during injection moulding process
    Najiy Rizal Suriani Rizal, Azuddin Mamat, Aidah Jumahat
    Pertanika Journal of Science & Technology, 2017;25(103):233-240.
    MyJurnal
    In recent years, injection moulding process is one of the most advanced and efficient manufacturing processes for mass production of plastic bottles. However, a good quality of parison is difficult to achieve due to uncontrollable humidity, pressure inlet and water inlet velocity. This paper investigates the effect of using multiple mould cavities to improve the process fill time and injection pressure in the production of PET plastic bottles using MoldFlow software. The modelling of parison was developed using CATIA with the consideration of every part of the parison. MoldFlow software was used to analyse the flow of 20 g parison with different cavity numbers (1, 8, 16, 24 cavity), as well as its corresponding runner size towards its fill time and injection pressure. Other important parameters that affect the production of parison, such as melting temperature, mould temperature, atmospheric temperature and cooling time, were remained constant. The fill time required to produce 24 moulds was improved by 60% compared to using 8 mould cavity only, and this enable the production of more plastic bottles in a day. Therefore, fill time and injection pressure are two important parameters to be considered in the injection moulding process, especially to reduce parison defect and increase its production rate.
    Matched MeSH terms: Humidity
  17. Effect of tropical outdoor weathering on the surface roughness and mechanical properties of maxillofacial silicones
    Rahman AM, Jamayet NB, Nizami MMUI, Johari Y, Husein A, Alam MK
    J Prosthet Dent, 2021 Jan 17.
    PMID: 33472753 DOI: 10.1016/j.prosdent.2020.07.026
    STATEMENT OF PROBLEM: The climate of tropical Southeast Asia includes high humidity and ultraviolet radiation that reduce the lifespan of silicone prostheses by inducing changes in their mechanical properties and color stability. Studies on the surface roughness (SR) and mechanical properties of different silicone elastomers (SEs) subjected to the natural tropical weather of Southeast Asia are lacking.

    PURPOSE: The purpose of this in vitro study was to evaluate the SR, tensile strength (TS), and percentage elongation (% E) of different SEs subjected to outdoor weathering in the Malaysian climate.

    MATERIAL AND METHODS: Type-II dumbbell-shaped specimens (N-120) (nonweathered=15, weathered=15) were made from 3 room-temperature vulcanized (A-2000, A-2006, and A-103) and 1 heat-temperature vulcanized (M-511) silicone (Factor II). For 6 months, weathered specimens were subjected to outdoor weathering inside a custom exposure rack. Simultaneously, the nonweathered specimens were kept in a dehumidifier. Subsequently, the SR was measured with a profilometer; TS and % E were measured by using a universal testing machine. Two-way ANOVA was used to compare the means of the tested properties of the nonweathered and weathered specimens, and pairwise comparison was carried out between the silicones (α=.05).

    RESULTS: After outdoor weathering, the SR, TS, and % E were adversely affected by weathering in the Malaysian environment. Among the silicone materials, A-2000 showed the least TS changes (2.51 MPa), while A-2006 demonstrated significant changes in percentage elongation after outdoor weathering (266.5%). M-511 exhibited the highest mean value (2.50 μm) for SR changes. In addition, A-103 SE showed statistically significant differences in most pairwise comparisons for all 3 dependent variables.

    CONCLUSIONS: Based on the evaluation of mechanical properties, A-103 can be suggested as a suitable silicone for maxillofacial prostheses fabricated for tropical climates. However, A-2000 can be a suitable alternative, although significant changes to surface roughness were detected after outdoor weathering.

    Matched MeSH terms: Humidity
  18. Fulltext Optimization of Micro and Nano Palm Oil Fuel Ash to Determine the Carbonation Resistance of the Concrete in Accelerated Condition
    Tang WL, Lee HS, Vimonsatit V, Htut T, Singh JK, Wan Hassan WNF, et al.
    Materials (Basel), 2019 Jan 03;12(1).
    PMID: 30609786 DOI: 10.3390/ma12010130
    The carbonation rate of reinforced concrete is influenced by three parameters, namely temperature, relative humidity, and concentration of carbon dioxide (CO₂) in the surroundings. As knowledge of the service lifespan of reinforced concrete is crucial in terms of corrosion, the carbonation process is important to study, and high-performance durable reinforced concretes can be produced to prolong the effects of corrosion. To examine carbonation resistance, accelerated carbonation testing was conducted in accordance with the standards of BS 1881-210:2013. In this study, 10⁻30% of micro palm oil fuel ash (mPOFA) and 0.5⁻1.5% of nano-POFA (nPOFA) were incorporated into concrete mixtures to determine the optimum amount for achieving the highest carbonation resistance after 28 days water curing and accelerated CO₂ conditions up to 70 days of exposure. The effect of carbonation on concrete specimens with the inclusion of mPOFA and nPOFA was investigated. The carbonation depth was identified by phenolphthalein solution. The highest carbonation resistance of concrete was found after the inclusion of 10% mPOFA and 0.5% nPOFA, while the lowest carbonation resistance was found after the inclusion of 30% mPOFA and 1.5% nPOFA.
    Matched MeSH terms: Humidity
  19. Fulltext The Effect of Tropical Environment on Fatigue Failure in Royal Malaysian Airforce (RMAF) Aircraft Structure and Operational Readiness
    Venugopal A, Mohammad R, Koslan MFS, Sayd Bakar SR, Ali A
    Materials (Basel), 2021 May 06;14(9).
    PMID: 34066461 DOI: 10.3390/ma14092414
    The environmental condition in which the Royal Malaysian Airforce is currently operating its aircraft is prone to corrosion. This is due to the high relative humidity and temperature. With most of its aircraft being in the legacy aircraft era, the aircraft's main construction consists of the aluminium 2024 material. However, this material is prone to corrosion, thus reducing fatigue life and leading to fatigue failure. Using the concept of either Safe Life or Damage Tolerance as its fatigue design philosophy, the RMAF adopts the Aircraft Structure Integrity Program (ASIP) to monitor its structural integrity. With the current problem of not having the structural limitation on corrosion-damaged structure, the RMAF has embarked on its fatigue testing method. Finite Element (FE) studies and flight tests were conducted, and the outcome is summarized. The conclusion is that the longeron tested on the aircraft can withstand the operational load, and its yield strength is below the ultimate yield strength of the material. These research outcomes will also enhance the ASIP for other aircraft platforms in the RMAF fleet for its structure life assessment or service life extension program.
    Matched MeSH terms: Humidity
  20. Fulltext Effect of integration of oxalic acid and hot water treatments on postharvest quality of rambutan (Nephelium lappaceum L. cv. Anak Sekolah) under modified atmosphere packaging
    Hafiz AFA, Keat YW, Ali A
    J Food Sci Technol, 2017 Jun;54(7):2181-2185.
    PMID: 28720977 DOI: 10.1007/s13197-017-2645-1
    The shelf life of rambutan is often limited due to rapid water loss from the spinterns and browning of the pericarp. An integrated approach, which combined hot water treatment (HWT) (56 °C for 1 min), oxalic acid (OA) dip (10% for 10 min) and modified atmosphere packaging (MAP), was used to study their effectiveness on the quality of rambutan during storage (10 °C, 90-95% relative humidity). Significant differences were observed in rambutan quality with the combination of MAP + HWT + OA after 20 days of storage. This treatment combination resulted into better retention of firmness and colour (L and a* values) than in the control. Change in the total soluble solid content was significantly delayed however the titratable acidity showed no significant change in comparison to the control at the end of storage.
    Matched MeSH terms: Humidity
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links