Displaying publications 1 - 20 of 284 in total

Abstract:
Sort:
  1. A lead(II) ion selective electrode via a metal complex of poly(hydroxamic acid)
    Anuar K, Hamdan S
    Talanta, 1992 Dec;39(12):1653-6.
    PMID: 18965586
    A new lead(II) electrode has been constructed with poly(hydroxamic acid) (PHXA) as the active material and silicone rubber as the supporting material. The electrode gave near Nerstian response over the concentration range 4 x 10(-5)-1 x 10(-2)M lead(II). The detection limit of the electrode is approximately 4 x 10(-6)M and the electrode works well in the pH range 4.5-6.0. The response time was 50-120 sec over the whole concentration range and the electrode has a working life of at least 4 weeks. Iron(III) severely poisoned the electrode membrane. Nickel(II) and mercury(II) gave very strong interference compared to copper(II), silver(I), cobalt(II), sodium(I), potassium(I), zinc(II) and cadmium(II) which gave some or little interference. Values determined with atomic absorption (AAS) and a commercial lead(II) electrode were in good agreement with those measured with the lead(II) electrode reported here.
    Matched MeSH terms: Anions; Ions
  2. Fluxes of ions in precipitation, throughfall and stemflow in an urban forest in Kuala Lumpur, Malaysia
    Radzi Abas M, Ahmad-Shah A, Nor Awang M
    Environ Pollut, 1992;75(2):209-13.
    PMID: 15092035
    A study was carried out to determine the chemical composition of bulk precipitation, throughfall and stemflow in an urban forest in Kuala Lumpur, Malaysia. The mean weekly rainfall recorded during the period of study was 63.2 mm. Throughfall, stemflow and canopy interception of incident precipitation were 77.1%, 1.2% and 21.7% respectively. Bulk precipitation, througfall and stemflow were acidic, the pH recorded being 4.37, 4.71 and 4.15 respectively. In all cases the dominant ions were NO3, SO4, Cl, NH4, K, Ca and Na. Of the ions studied Ca, K, Cl, SO4, Mg and Mn showed net increases in passing through the forest canopy, while NH4, Na, NO3, Zn, H and Fe showed net retention. This study shows that the urban environment of Kuala Lumpur contributes considerable amounts of materials to the atmosphere, as reflected by the high ionic contents in bulk precipitation, throughfall and stemflow.
    Matched MeSH terms: Ions
  3. Isolation and characterization of a mo -reducing bacterium
    Ghani B, Takai M, Hisham NZ, Kishimoto N, Ismail AK, Tano T, et al.
    Appl Environ Microbiol, 1993 Apr;59(4):1176-80.
    PMID: 16348915
    A Mo -reducing bacterium (strain 48), which grew on medium supplemented with 200 mM Mo, was isolated from stream water obtained from Chengkau, Malaysia. The chemical properties of strain 48 conform to the characteristics of Enterobacter cloacae. Under anaerobic conditions in the glucose-yeast extract medium containing phosphate ion (2.9 mM) and Mo (10 mM), the bacterium reduced Mo to form molybdenum blue. Approximately 27% of Mo added to the medium was reduced after 28 h of cultivation. The reduction of Mo with glucose as an electron donor was strongly inhibited by iodoacetic acid, sodium fluoride, and sodium cyanide, suggesting an involvement of the glycolytic pathway and electron transport in Mo reduction. NADH and N,N,N',N' -tetramethyl-p-phenylenediamine served as electron donors for Mo reduction. When NADH was used as an electron donor, at first cytochrome b in the cell extract was reduced, and then molybdenum blue was formed. Sodium cyanide strongly inhibited Mo reduction by NADH (5 mM) but not the reduction of cytochrome b in the cell extract, suggesting that the reduced component of the electron transport system after cytochrome b serves as an electron donor for Mo reduction. Both ferric and stannous ions strongly enhanced the activity of Mo reduction by NADH.
    Matched MeSH terms: Ions
  4. Synthesis and properties of poly(hydroxamic acid) from crosslinked poly(methacrylate)
    Haron MJ, Wan Md ZW, Desa MZ, Kassim A
    Talanta, 1994 May;41(5):805-7.
    PMID: 18966002
    Poly(hydroxamic acid) chelating ion-exchange resin was prepared from crosslinked poly(methacrylate) beads. The starting polymer was prepared by a suspension polymerization of methacrylate and divinyl benzene. Conversion of the ester groups into the hydroxamic acid was carried out by treatment with hydroxylamine in an alkaline solution. Hydroxamic acid capacity of the product was 2.71 mmol/g. The resin exhibited high affinity towards Fe(III) and Pb ions and its capacities for Fe(III), Pb, Cu, Ni and Co ions were pH dependent. The ability of the resin to carry out the separation of Fe(III)CuCo/Ni and PbNi ions is also reported.
    Matched MeSH terms: Ions
  5. Kesan Komposisi Magnesium ke atas Pemagnetan dan Kerintangan Elektrik Ferit Mnx-zMgzZn1-xFe2O4 (Effects of Magnesium Composition on the Magnetization and Electrical Resistivity of Mnx-zMgzZn1-xFe2O4 Ferrites)
    Ahmad Nazlin Yusoff, Mustaffa Hj. Abdullah, Sahrin Hj. Ahmab, Ng L
    Sains Malaysiana, 1996;25.
    Sampels of Mnx-zMgzZn1-xFe2O4 ferrites, with x = 0.5, 0 < z < 0.5; x = 0.6, 0 < z 0.6 and x = 0.7, 0 < z < 0.7, were prepared by solid state reaction. For all samples, magnetization as a function of applied magnetic field was measured at room temperature (TR) and several temperatures above TR but below the Neel temperature (TN); while magnetic hysteresis was obtained at TR and 373 K using a vibrating sample magnetometer (VSM). Electrical resistivity at TR was measured by a two terminal method. The three series of Mn-Mg-Zn ferrite indicate a maximum ,agnetization at certain substitution of Mg. TN increased with the increase of Mg content while resistivity varied in the opposite manner. The variation of magnetization is interpreted as due to Mg started to replace the Mn at the tetrahedral sites (A) so that the resultant magnetic moment increased. However further substitution occurred at the octahedral sites (B), thus lowering the magnetic moment. A small coercivity indicates that the samples are soft ferrites with a small energy loss. A reduction in the electrical resistivity with Mg content probably due to an increase in the mobility of charge hopping between the Fe2+ and Fe3+ ions and also between Mn2+ and Mn3+ ions.
    Sampel ferit Mnx-zMgzZn1-xFe2O4 dengan x = 0.5, 0 < z < 0.5; x = 0.6, 0 < z 0.6 dan x = 0.7, 0 < z < 0.7, disediakan dengan tindak balas keadaan pepejal. Pengukuran pemagnetan sebagai fungsi medan magnet dilakukan pada suhu bilik (TR) dan suhu-suhu yang lebih tinggi tetapi di bawah suhu Neel bilik (TR) dan suhu-suhu yang lebih tinggi tetapi di bawah suhu Neel (TN) serta histerisis magnet pada suhu bilik dan 373 K diperolehi untuk semua sampel menggunakan magnetometer sampel bergetar (VSM). Kerintangan elektrik pada suhu bilik diperolehi dengan kaedah dua terminal. Ketiga-tiga siri ferit Mn-Mg-Zn itu masing-masing menunjukkan suatu pemagnetan maksimum pada suatu kadar penggantian Mn oleh Mg. TN meningkat dengan kandungan Mg tetapi kerintangan elektrik berubah sebaliknya. Perubahan pemagnetan seperti yang tersebut disebabkan Mg mula menggantikan Mn pada tapak tetrahedron (A) menyebabkan momen magnet paduan meningkat. Penambahan Mg seterusnya menyebabkan Mn pada tapak oktahedron pula diganti, sehingga momen magnet paduan mengurang. Koersiviti yang kecil menunjukkan sampel bersifat magnet lembut dengan kehilangan tenaga yang sangat kecil. Pengurangan kerintangan dengan penambahan Mg mungkin disebabkan oleh peningkatan kelincahan pembawa cas yang melompat di antara ion-ion Fe2+ dan Fe3+ dan juga di antara Mn2+ dan Mn3+.
    Matched MeSH terms: Ions
  6. Isolation of a mannose-binding and IgE- and IgM-reactive lectin from the seeds of Artocarpus integer
    Lim SB, Chua CT, Hashim OH
    J Immunol Methods, 1997 Dec 01;209(2):177-86.
    PMID: 9461333
    A mannose-binding lectin, termed champedak lectin-M, was isolated from an extract of the crude seeds of champedak (Artocarpus integer). On gel filtration chromatography, the lectin eluted in a single peak at elution volumes corresponding to 64 kDa. SDS-PAGE showed the mannose-binding lectin to be composed of 16.8 kDa polypeptides with some of the polypeptides being disulphide-linked to give dimers. When tested with all isotypes of immunoglobulins, champedak lectin-M demonstrated a selective strong interaction with human IgE and IgM, and a weak interaction with IgA2. The binding interactions of lectin-M were metal ion independent. The lectin was also shown to interact with horseradish peroxidase, ovalbumin, porcine thyroglobulin, human alpha1-acid glycoprotein, transferrin and alpha1-antitrypsin. It demonstrated a binding preference to Man alpha 1-3Man ligands in comparison to Man alpha 1-6Man or Man alpha 1-2Man.
    Matched MeSH terms: Ions
  7. Dichlorobis(trimethylenethiourea-kappaS)antimony(III) chloride
    Razak IA, Usman A, Fun HK, Yamin BM, Keat GW
    Acta Crystallogr C, 2002 Feb;58(Pt 2):m122-3.
    PMID: 11828100
    In the title compound, [SbCl(2)(C(4)H(8)N(2)S)(2)]Cl, the coordination around the Sb atom can be described as distorted pseudo-octahedral. Both rings of the trimethylenethiourea ligands [alternatively 3,4,5,6-tetrahydropyrimidine-2(1H)-thione] adopt an envelope conformation. The molecules are connected into dimers in the ab plane by two intermolecular hydrogen bonds. The dimers are arranged into infinite one-dimensional chains along the a axis as a result of the Cl(-) ions forming intermolecular hydrogen bonds with three NH groups.
    Matched MeSH terms: Ions
  8. A flow cell optosensor for lead based on immobilized gallocynin in chitosan membrane
    Yusof NA, Ahmad M
    Talanta, 2002 Sep 12;58(3):459-66.
    PMID: 18968772
    Gallocynin immobilized in chitosan membrane has been studied as a sensor element of an optical sensor for lead using a flowing system. By using this set up, lead in solution has been determined in the concentration range from 1.0x10(-1) to 1.0x10(3) ppm with a detection limit of 0.075 ppm. The standard deviation of the method for the repeatability of lead detection at a concentration of 100 ppm was found to be 2.10%. The response of the sensor was reproducible and can be regenerated by using acidified saturated KNO(3) solution. Interference from foreign ions was also studied at 1:1 mole ratio of Pb(II):foreign ions.
    Matched MeSH terms: Ions
  9. Fulltext Effectiveness of domestic water filters in removing suspended solids, residual chlorine and coliform bacteria
    Chong, Chee Kheong, Vijayakumar, G., Teoh, Leong Hooi, Siti Zubaidah, A.R., Mohamed Sapian, M., Abdul Rahim, A.
    Malaysian Journal of Public Health Medicine, 2003;3(2):38-40.
    MyJurnal
    Water filters are being increasingly promoted and used in the home. There are many types of commercial water jilters available for domestic use but almost all of them employ a physical filter media and an activated substance. The study showed that water filters effectively removed suspended solids and residual chlorine. However, as far as removing colhform bacteria is concerned, in ZZ .5% of the cases, bacteria were in fact introduced into the water. And in 20% ofthe cases, the amount of bacteria introduced was “too numerous to count (TNTC)". Furthermore, water hlters can lose their ability to filter bacteria without losing their ability to filter suspended solids and residual chlorine. This highlights the necessity of some authorized body looking into the claims made by these water filter manufacturers and impose certain standards to ensure that at the very least, the water quality ofthe hltered water is not worse than the unfiltered water.
    Matched MeSH terms: Ions
  10. On the physics of ferroelectrics
    Webb JF
    Sci Prog, 2003;86(Pt 3):203-34.
    PMID: 15079997
    The main physical properties of ferroelectric crystals are described, and the macroscopic and microscopic viewpoints are discussed along with some applications, such as in capacitors and nonlinear optics. The emphasis is on physical understanding, while the mathematical level is kept to a minimum or supplemented by graphical representations to make the article more accessible.
    Matched MeSH terms: Ions
  11. Prospects of plasma immersion ion implantation and deposition (PIlI & D) in the biomaterials field in Malaysia and south East Asia
    Mohamed MH
    Med J Malaysia, 2004 May;59 Suppl B:19-20.
    PMID: 15468798
    One of the emerging technologies in the area of plasma processing is plasma immersion ion implantation (PSII). The paper addresses the merits offered by the PSII technique especially in the area of biomaterial processing. Worldwide development status as well as the drive towards commercial applications is elaborated in an attempt to draw the attention to the importance of the process for Malaysia as well as south East Asia.
    Matched MeSH terms: Ions/metabolism*
  12. Effects of buffer properties on cyclodextrin glucanotransferase reactions and cyclodextrin production from raw sago (Cycas revoluta) starch
    Kamaruddin K, Illias RM, Aziz SA, Said M, Hassan O
    Biotechnol Appl Biochem, 2005 Apr;41(Pt 2):117-25.
    PMID: 15202937
    Results from the present study have shown that the ionic species of buffers, pH values and reaction temperature can affect the enzyme unit activities and product specificity of Toruzyme (Novo Nordisk A/S Bagsvaerd, Denmark) CGTase (cyclodextrin glucanotransferase). Applying a similar reaction environment (acetate buffer, pH 6.0; temperature, 60 degrees C), the CGTase was found to be capable of producing pre dominantly beta-cyclodextrin from either raw or gelatinized sago (Cycas revoluta) starch. Changing the buffer from acetate to phosphate reduced the yield of beta-cyclodextrin from 2.48 to 1.42 mg/ml and also affected the product specificity, where production of both alpha- and beta-cyclodextrins were more pronounced. The decrease in the production of cyclodextrins in phosphate buffer was significant at both pH 6.0 and 7.0. However, changing the buffer to Tris/HCl (pH 7.0) showed a significant increase in beta-cyclodextrin production. Increasing the ionic strength of sodium acetate and Tris/HCl buffers at pH 6.0 and 7.0 to equivalent ionic strength of phosphate buffers showed no significant effects on cyclodextrin production. Higher yield of cyclodextrins at pH 7.0 when Tris/HCl was used might be due to the binding of chloride ions at the calcium-binding sites of the CGTase, resulting in the shift of the optimum pH close to physiological environment, leading to an increase in the activities and specificity.
    Matched MeSH terms: Ions; Solutions
  13. FT-IR studies on interactions among components in hexanoyl chitosan-based polymer electrolytes
    Winie T, Arof AK
    Spectrochim Acta A Mol Biomol Spectrosc, 2006 Mar 1;63(3):677-84.
    PMID: 16157506
    Fourier transform infrared (FT-IR) spectroscopic studies have been undertaken to investigate the interactions among components in a system of hexanoyl chitosan-lithium trifluoromethanesulfonate (LiCF(3)SO(3))-diethyl carbonate (DEC)/ethylene carbonate (EC). LiCF(3)SO(3) interacts with the hexanoyl chitosan to form a hexanoyl chitosan-salt complex that results in the shifting of the N(COR)(2), CONHR and OCOR bands to lower wavenumbers. Interactions between EC and DEC with LiCF(3)SO(3) has been noted and discussed. Evidence of interaction between EC and DEC has been obtained experimentally. Studies on polymer-plasticizer spectra suggested that there is no interaction between the polymer host and plasticizers. Competition between plasticizer and polymer on associating with Li(+) ions was observed from the spectral data for gel polymer electrolytes. The obtained spectroscopic data has been correlated with the conductivity performance of hexanoyl chitosan-based polymer electrolytes.
    Matched MeSH terms: Ions
  14. Enhancement of fluoride release from glass ionomer cement following a coating of silver fluoride
    Ariffin Z, Ngo H, McIntyre J
    Aust Dent J, 2006 Dec;51(4):328-32.
    PMID: 17256308
    BACKGROUND: This study investigated the extent to which a coating of 10% silver fluoride (AgF) on discs of glass jonomer cements (GIGs) would enhance the release of fluoride ion into eluting solutions at varying pH.

    MATERIALS AND METHODS: Forty discs each of Fuji LX, Fuji VII and of Vitrebond were prepared in a plastic mould. Twenty discs of each material were coated for 30 seconds with a 10% solution of AgF. Five discs each of coated and uncoated material were placed individually in 4m1 of differing eluant solutions. The eluant solutions comprised deionized distilled water (DDW) and three separate acetate buffered solutions at pH 7, pH 5 and pH 3. After 30 minutes the discs were removed and placed in five vials containing 4m1 of the various solutions for a further 30 minutes. This was repeated for further intervals of time up to 216 hours, and all eluant solutions were stored. Fluoride concentrations in the eluant solutions were estimated using a fluoride specific electrode, with TISAB IV as a metal ion complexing and ionic concentration adjustment agent. Cumulative fluoride release patterns were determined from the incremental data.

    RESULTS: The coating of AgF greatly enhanced the level of fluoride ion release from all materials tested. Of the uncoated samples, Vitrehond released the greater concentrations of fluoride ion, followed by Fuji VII. However, cumulative levels of fluoride released from coated samples of the GICs almost matched those from coated Vitrebond.

    CONCLUSIONS: It was concluded that a coating of 10% AgF on GICs and a resin modified GIC greatly enhanced the concentration of fluoride released from these materials. This finding might be applied to improving protection against recurrent caries, particularly in high caries risk patients, and in the atraumatic restorative technique (ART) of restoration placement.

    Matched MeSH terms: Ions
  15. Optical biodetection of cadmium and lead ions in water
    Haron S, Ray AK
    Med Eng Phys, 2006 Dec;28(10):978-81.
    PMID: 17018258
    A three layer waveguiding silicon dioxide (SiO(2))/silicon nitride (Si(3)N(4))/SiO(2) structure on silicon substrate was proposed as an optically efficient biosensor for calibration of heavy metal ions in drinking water. The catalytic activities of urease and acetylcholine esterase (AchE) were inhibited by the presence of cadmium (Cd(2+)) and lead (Pb(2+)) ions. The detection limit as low as 1 ppb was achieved by employing the technique of total reflection at the interface between the Si(3)N(4) core and composite polyelectrolyte self-assembled (PESA) membranes containing cyclotetrachromotropylene (CTCT) as an indicator.
    Matched MeSH terms: Ions
  16. Fulltext Effects of ion beam irradiation on Oncidium lanceanum orchids
    Zaiton Ahmad, Affrida Abu Hassan, Mohd Nazir Basiran, Nurul Aliaa Idris, Tanaka, A., Shikazono, N., et al.
    Journal of Nuclear and Related Technologies, 2006;2006(1):1-7.
    MyJurnal
    Protocorm-like bodies (PLBs) of an orchid (Oncidium lanceanum) were irradiated using 220 MeV 12 C 5+ ions, accelerated by AVF cyclotron at JAEA, Japan in 2005. Five different doses were applied to the PLBs; 0, 1.0, 2.0, 6.0 and 12.0 Gy. Following irradiation, these PLBs were maintained in cultures for germination and multiplication. Irradiation effects on growth and seedling regeneration patterns as well as molecular characteristics of the in vitro cultures were monitored and recorded. In general, average fresh weights of the irradiated PLBs increased progressively by irradiating the explants at 1.0, 2.0 and reached the maximum at 6.0 Gy. The figure however dropped when the explants were irradiated at 12 Gy. Surprisingly, although the highest average fresh weight was recorded on PLBs irradiated at 6.0 Gy, most of these PLBs were not able to regenerate into complete shoots. On average, after 4 months of irradiation, only 21 seedlings were successfully regenerated from each gram of these PLBs. The highest shoot regeneration was recorded on cultures irradiated at 2.0 Gy in which 102 seedlings were obtained from one gram of the PLBs. Some morphological changes were seen on in vitro plantlets derived from PLBs irradiated at doses of 1.0 and 2.0 Gy. Most of the regenerated seedlings have been transferred to glasshouse for further morphological selection. Molecular analysis showed the presence of DNA polymorphisms among the seedlings from different doses of irradiation.
    Matched MeSH terms: Ions
  17. Fulltext New reaction kinetic model derived from molecular dynamics simulation data on non-linearity of rate coefficients and their relation to activity coefficients
    Jesudason, C.G.
    ASM Science Journal, 2007;1(1):7-18.
    MyJurnal
    Molecular dynamics reaction simulation showed that the rate constant is not constant over the concentration profile of reactants and products over a fixed temperature regime, and this variation is expressed in terms of the defined reactivity coefficients. The ratio of these coefficients for the forward and backward reactions were found to equal that of the activity coefficient ratio for the product and reactant species. A theory was developed to explain kinetics in general based on these observations. Several other theorems had first to be developed, most striking of all was the inference that the excess Helmholtz free energy was the thermodynamical function which had a direct relation to these activity factors than the Gibbs free energy. The theory is applied to a class of ionic reactions which could not be rationalized using the standard Bjørn-Bjerrum theory of ionic reactions.
    Matched MeSH terms: Ions
  18. Fulltext Global colour scale for tmeline events in ion dynamics
    Sharif, J.M., Latiff, M.S.A., Ngadi, M.A.
    ASM Science Journal, 2007;1(2):109-128.
    MyJurnal
    Spatio-temporal datasets are a collection of datasets where data can vary in both space and time. Theoretically, such datasets can be considered as continuous and discrete. For example, specification of the function, F: Ed  T Rn, where Ed denotes d-dimensional Euclidean space, T = R* ∩ {} the domain of time and Rn an n-dimensional scalar field. Examples of such data sets include time-varying simulation results, film and videos, time-varying medical datasets, geometry models with motion or deformation, meteorological measurements, and many more. It is therefore highly desirable to use visualisation to summarize meaningful information in higher dimensional spatio-temporal datasets. Our aim is to conceive an efficient visual study to facilitate scientists in identifying temporal association among complex and chaotic atom movements in ion trajectories. An application that uses a streamline for spatial motion of ion trajectories and Colour Number Coding Scheme for temporal encoding of high degree of timeline events among mobile ions is proposed. With an anthology of the visual examples, it was revealed that this application would be beneficial for scientists to visually mine any 3D spatio-temporal dataset.
    Matched MeSH terms: Ions
  19. Micropropagation of Elaeis guineensis Jacq. 'Dura': Comparison of three basal media for efficient regeneration
    Muniran F, Bhore SJ, Shah FH
    Indian J Exp Biol, 2008 Jan;46(1):79-82.
    PMID: 18697576
    Three basal plant tissue culture media, namely, N6, MS, and modified Y3, were compared to optimize micropropagation protocol for E. guineensis. Full strength media were used separately to regenerate plantlets directly using immature zygotic embryos (IZEs), and through somatic embryogenesis of calli obtained from IZEs. The plantlets regenerated by direct regeneration on three media were examined for shoot length and rooting percentage. For the induction of callus, somatic embryogenesis, and rooting modified Y3 medium was the most effective. In conclusion, the results indicate that modified Y3 medium is the most suitable for direct regeneration, callus induction and somatic embryogenesis in E. guineensis.
    Matched MeSH terms: Ions
  20. Fulltext An overview of bone cells and their regulating factors of differentiation
    Mohamed AM
    Malays J Med Sci, 2008 Jan;15(1):4-12.
    PMID: 22589609 MyJurnal
    Bone is a specialised connective tissue and together with cartilage forms the strong and rigid endoskeleton. These tissues serve three main functions: scaffold for muscle attachment for locomotion, protection for vital organs and soft tissues and reservoir of ions for the entire organism especially calcium and phosphate. One of the most unique and important properties of bone is its ability to constantly undergo remodelling even after growth and modelling of the skeleton have been completed. Remodelling processes enable the bone to respond and adapt to changing functional situations. Bone is composed of various types of cells and collagenous extracellular organic matrix, which is predominantly type I collagen (85-95%) called osteoid that becomes mineralised by the deposition of calcium hydroxyapatite. The non-collagenous constituents are composed of proteins and proteoglycans, which are specific to bone and the dental hard connective tissues. Maintenance of appropriate bone mass depends upon the precise balance of bone formation and bone resorption which is facilitated by the ability of osteoblastic cells to regulate the rate of both differentiation and activity of osteoclasts as well as to form new bone. An overview of genetics and molecular mechanisms that involved in the differentiation of osteoblast and osteoclast is discussed.
    Matched MeSH terms: Ions
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links