Displaying publications 1 - 20 of 24 in total

Abstract:
Sort:
  1. Baig MR, Gunaseelan R
    J Oral Implantol, 2012 Apr;38(2):149-53.
    PMID: 20932151 DOI: 10.1563/AAID-JOI-D-09-00089
    Passive fit of a long-span screw-retained implant prosthesis is an important criteria for the success of the restoration. This article describes a technique for fabricating a ceramometal implant fixed dental prosthesis (FDP) for a long-span partially edentulous situation by altering the conventional screw-retained design. The possibility of a passive fit is maximized by intraoral luting of the cast frame to milled abutments, and the potential framework distortion during fabrication is compensated to a major extent. Retrievability is ensured by screw retention of the prosthesis to the implants. Compared with conventional porcelain fused to metal screw-retained FDP, this prosthesis is relatively inexpensive to fabricate.
    Matched MeSH terms: Maxilla/surgery
  2. Chew MT
    Angle Orthod, 2006 Sep;76(5):806-9.
    PMID: 17029514
    The aim of this retrospective study is to investigate the spectrum and management of dentofacial deformities in a multiethnic Asian community.
    Matched MeSH terms: Maxilla/surgery
  3. Al-Juboori MJ, AbdulRahaman SB, Hassan A
    Implant Dent, 2013 Aug;22(4):351-5.
    PMID: 23811720 DOI: 10.1097/ID.0b013e318296583d
    To detect the correlation between crestal bone resorption and implant stability during healing period using resonance frequency analysis (RFA).
    Matched MeSH terms: Maxilla/surgery
  4. Baig MR, Rajan G, Yunus N
    Gerodontology, 2012 Jun;29(2):e1140-5.
    PMID: 21615782 DOI: 10.1111/j.1741-2358.2010.00433.x
    Dental rehabilitation of a completely edentulous geriatric patient has always been a challenge to the clinician, especially in treating those with higher expectations and demands. Treatment duration and the amount of residual alveolar bone available are often important considerations when planning for dental implant-based fixed treatment for these patients. With the introduction of zygomatic implants, a graftless alternative solution has emerged for deficient maxillary bone with provision for immediate loading. This article describes the treatment of a completely edentulous elderly patient using zygomatic implants in conjunction with conventional implants. The implants were immediately loaded using a definitive acrylic resin fixed denture reinforced with a cast metal framework, to provide function and aesthetics.
    Matched MeSH terms: Maxilla/surgery
  5. Siow KK, Ong ST, Lian CB, Ngeow WC
    J Oral Sci, 2002 Dec;44(3-4):165-71.
    PMID: 12613507
    Thirty-one patients treated at the Faculty of Dentistry, University of Malaya, were assessed for their satisfaction following orthognathic surgery. The female to male ratio was 22:9 with an age range of 17 to 36. Almost all patients (97%) listed appearance as one of their rationales for surgery. More males (78%) than females (59%) wanted functional improvement, while more females (91%) than males (33%) hoped for improvement in self-confidence. All patients reported esthetic improvement while 68% each reported improvement in mastication and self-confidence. Slightly more than half (52%) chose esthetic improvement as the single most important factor resulting in satisfaction. Almost ninety percent of male patients claimed satisfaction with functional improvement, while 68% of those who found satisfaction in improved self-confidence were females. Eighty-seven percent rated their post-surgical changes as being well accepted by their family. The impact of these findings on the success of the surgery and the need to reinforce verbal communication with printed pamphlets are emphasized.
    Matched MeSH terms: Maxilla/surgery
  6. Purmal K, Alam MK, Pohchi A, Abdul Razak NH
    PLoS One, 2013;8(12):e84202.
    PMID: 24367643 DOI: 10.1371/journal.pone.0084202
    Intermaxillary (IMF) screws feature several advantages over other devices used for intermaxillary fixation, but using cone beam computed tomography (CBCT) scans to determine the safe and danger zones to place these devices for all patients can be expensive. This study aimed to determine the optimal interradicular and buccopalatal/buccolingual spaces for IMF screw placement in the maxilla and mandible. The CBCT volumetric data of 193 patients was used to generate transaxial slices between the second molar on the right to the second molar on the left in both arches. The mean interradicular and buccopalatal/buccolingual distances and standard deviation values were obtained at heights of 2, 5, 8 and 11 mm from the alveolar bone crest. An IMF screw with a diameter of 1.0 mm and length of 7 mm can be placed distal to the canines (2 - 11 mm from the alveolar crest) and less than 8 mm between the molars in the maxilla. In the mandible, the safest position is distal to the first premolar (more than 5 mm) and distal to the second premolar (more than 2 mm). There was a significant difference (p<0.05) between the right and left quadrants. The colour coding 3D template showed the safe and danger zones based on the mesiodistal, buccopalatal and buccolingual distances in the maxilla and mandible.The safest sites for IMF screw insertion in the maxilla were between the canines and first premolars and between the first and second molars. In the mandible, the safest sites were between the first and second premolars and between the second premolar and first molar. However, the IMF screw should not exceed 1.0 mm in diameter and 7 mm in length.
    Matched MeSH terms: Maxilla/surgery
  7. Baig MR, Rajan G
    Indian J Dent Res, 2010 Apr-Jun;21(2):311-3.
    PMID: 20657109 DOI: 10.4103/0970-9290.66635
    This article describes the immediate placement and loading of implants in the aesthetic zone using an implant-retained, fixed prosthesis with a modified design. One section of the implant prosthesis has cemented crowns and the other section is the conventional screw-retained. This combined approach significantly offsets the unsuitable implant position, alignment or angulation, while ensuring the easy retrievability, repair and maintenance of the prosthesis at the same time.
    Matched MeSH terms: Maxilla/surgery
  8. Younis L, Taher A, Abu-Hassan MI, Tin O
    J Contemp Dent Pract, 2009;10(4):35-42.
    PMID: 19575052
    The purpose of this study was to compare bone healing and coronal bone remodeling following both immediate and delayed placement of titanium dental implants in extraction sockets.
    Matched MeSH terms: Maxilla/surgery
  9. Baig MR, Rajan G
    J Oral Implantol, 2010;36(1):31-5.
    PMID: 20218868 DOI: 10.1563/AAID-JOI-D-09-00062
    This article describes the dental implant-based rehabilitation of a partially edentulous patient with a unilateral maxillary dento-alveolar defect. A screw-retained prosthesis with a modified design was fabricated on zygomatic and regular dental implants. One section of the implant prosthesis has cemented crowns and the other section is conventional screw-retained. The design of the prosthesis overcame the hard and soft tissue deficit and provided the desired esthetics.
    Matched MeSH terms: Maxilla/surgery
  10. Madfa AA, Kadir MR, Kashani J, Saidin S, Sulaiman E, Marhazlinda J, et al.
    Med Eng Phys, 2014 Jul;36(7):962-7.
    PMID: 24834856 DOI: 10.1016/j.medengphy.2014.03.018
    Different dental post designs and materials affect the stability of restoration of a tooth. This study aimed to analyse and compare the stability of two shapes of dental posts (parallel-sided and tapered) made of five different materials (titanium, zirconia, carbon fibre and glass fibre) by investigating their stress transfer through the finite element (FE) method. Ten three-dimensional (3D) FE models of a maxillary central incisor restored with two different designs and five different materials were constructed. An oblique loading of 100 N was applied to each 3D model. Analyses along the centre of the post, the crown-cement/core and the post-cement/dentine interfaces were computed, and the means were calculated. One-way ANOVAs followed by post hoc tests were used to evaluate the effectiveness of the post materials and designs (p=0.05). For post designs, the tapered posts introduced significantly higher stress compared with the parallel-sided post (p<0.05), especially along the centre of the post. Of the materials, the highest level of stress was found for stainless steel, followed by zirconia, titanium, glass fibre and carbon fibre posts (p<0.05). The carbon and glass fibre posts reduced the stress distribution at the middle and apical part of the posts compared with the stainless steel, zirconia and titanium posts. The opposite results were observed at the crown-cement/core interface.
    Matched MeSH terms: Maxilla/surgery
  11. Zaman JQ, Yahaya N, Razali M, Ibrahim N, Nor GM, Ramli R
    Singapore Dent J, 2007 Dec;29(1):41-5.
    PMID: 18472529
    Obstruction remains as an important cause of failure in the eruption of a tooth. In this article, a 15-year-old girl was presented with retained upper left primary canine (63) and first primary molar (64), while the contralateral permanent canine (13) and premolars (14 and 15) have erupted. Upon radiographic examination, a mass which was diagnosed later to be compound odontome was detected. The treatment consisted of surgical removal of the odontome, extraction of the primary canine (63) and left permanent canine (23), and transplantation of the permanent canine (23). The management of this case and the literature related to autotransplantation are discussed.
    Matched MeSH terms: Maxilla/surgery*
  12. Mazlina S, Putra SH, Shiraz MA, Hazim MY, Roszalina R, Abdul AR
    Med J Malaysia, 2006 Aug;61(3):284-7.
    PMID: 17240576
    A retrospective data of 29 patients who underwent various types of maxillectomy from January 1998 till January 2004 in UKM hospital were reviewed. There were 21 males (72%) and 8 females (28%) with mean age of 42 years. Malays were the majority of patients 17 (59%), Chinese 11 (38%) and Indian 1 (3%). Seventeen patients (59%) presented with malignant tumours while 12 patients (41%) with benign tumours. Inverted papilloma (50%) was the commonest benign tumour and squamous cell carcinoma (36%) was the commonest malignancy. Medial maxillectomy was performed in ten patients (35%), total maxillectomy in seven patients (24%), three patients (10%) had near total, three patients (10%) had partial maxillectomy and six patients (21%) underwent inferior maxillectomy.
    Matched MeSH terms: Maxilla/surgery*
  13. Burezq H, Bang RL, George A, Mukhtar A
    J Craniofac Surg, 2007 Jul;18(4):971-4.
    PMID: 17667698
    Prominent premaxilla is one of the problems encountered when dealing with bilateral complete cleft lip and palate patients. Secondary alveolar bone grafting with these patients would achieve filling of the osseous defect, supports the alar base, eliminate the oro-nasal fistula and enhance the maxillary instability. This article describes the management of a bilateral cleft lip and palate patient with an extremely protruding premaxilla done in one stage surgery. To our knowledge, this is the first report of such degree of severity in the English literature.
    Matched MeSH terms: Maxilla/surgery
  14. Arshad AR, Goh CS
    Br J Plast Surg, 1994 Mar;47(2):139-41.
    PMID: 8149059
    Two cases of hypoglossia congenita with anterior maxillo-mandibular fusion are reported. One is a case of hypoglossia with anterior maxillo-mandibular fusion and the other is a case of hypoglossia-hypodactylia with anterior maxillo-mandibular fusion. This condition presents the anaesthetist with the problem of airway management during the surgery. A simple technique using a nasopharyngeal tube was used for these two cases, with satisfactory results.
    Matched MeSH terms: Maxilla/surgery
  15. Rahman AM, Nizami MMUI, Jamayet NB, Husein A
    J Coll Physicians Surg Pak, 2017 May;27(5):319-320.
    PMID: 28599699 DOI: 2623
    Matched MeSH terms: Maxilla/surgery*
  16. Tang IP, Shashinder S, Loganathan A, Anura MM, Zakarya S, Mun KS
    Singapore Med J, 2009 Sep;50(9):e326-8.
    PMID: 19787162
    An aneurysmal bone cyst is a rare bone lesion. Its origin and precise nature remain unknown. It is seen as a locally-destructive, rapidly expandable, benign multicystic mass. We report a 17-year-old boy with an aneurysmal bone cyst of the maxilla, with extensive local involvement and bony destruction that was treated surgically. There was no recurrence noted after four years of follow-up.
    Matched MeSH terms: Maxilla/surgery
  17. Harvinder S, Rosalind S, Mallina S, Gurdeep S
    Med J Malaysia, 2008 Mar;63(1):58-60.
    PMID: 18935736
    Inverted papillomas (IPs), although histologically benign, are aggressive lesions that may recur after excision. They usually present as unilateral firm, bulky, red and vascular masses. The objective of this case series is to discuss the surgical treatment options for IPs and to review the literature with a special emphasis on our experience with endoscopic medial maxillectomy. A retrospective review of the data of patients with IP treated by endoscopic medial maxillectomy was performed. This report describes the surgical experience with five patients with IP arising from various sites on the lateral nasal wall. Data points collected included age, sex, location(s) and histopathological diagnosis (benign IP vs IP with dysplasia or carcinoma). The surgical treatment strategy, need for adjunct approaches, complications, recurrence rates and length of follow-up were determined. The average age was 51.2 years (range, 35-62 years), with four males and one female. All cases were managed with endoscopic medial maxillectomy as the primary surgical modality. Adjunctive approaches included endoscopic dacryocystorhinostomy (EDCR) in two patients who presented with epiphora post-operatively. Intra-operative frozen section was performed in all cases to ensure complete tumor removal. No intra-operative complications were encountered. No recurrences were noted in these patients, with a mean follow-up period of 23 months.
    Matched MeSH terms: Maxilla/surgery*
  18. Eachempati P, Aggarwal H, Shenoy V, Baliga M
    BMJ Case Rep, 2015 Aug 05;2015.
    PMID: 26245286 DOI: 10.1136/bcr-2015-210330
    Fibrous dysplasia is a non-neoplastic hamartomatous developmental fibro-osseous lesion of bone. Monostotic fibrous dysplasia is more common than the polyostotic form and usually involves jaw bones, ribs and femur. Maxillary lesions may extend to involve the maxillary sinus, zygoma, sphenoid bone and floor of the orbit and require surgical intervention resulting in an acquired defect of the involved site. A multidisciplinary team approach involving an oral pathologist, oral surgeon, oral medicine expert and maxillofacial prosthodontist is required for successful treatment and rehabilitation of such patients. This article describes a case of a patient with fibrous dysplasia of the left maxilla, which was successfully managed by integrating surgical intervention and postoperative rehabilitation, with a surgical obturator and an interim partial denture prosthesis that successfully limited the detrimental effects of surgery, and helped the patient in resocialisation, thereby improving her quality of life.
    Matched MeSH terms: Maxilla/surgery*
  19. Haider KG, Lewis GR
    Quintessence Int, 1994 Jan;25(1):23-6.
    PMID: 8190877
    A variety of problems faces the prosthodontist attempting reconstruction of maxillary defects. There are various treatment options for patients requiring a partial maxillectomy and an obturator prosthesis. Reduced adaptability makes it difficult for the patient to learn to use a new appliance, unless existing skills can be employed. It is therefore helpful to reproduce familiar features of a patient's existing obturator, especially if this has been used successfully over a transition period.
    Matched MeSH terms: Maxilla/surgery*
  20. Mousa MA, Abdullah JY, Jamayet NB, Alam MK, Husein A
    Biomed Res Int, 2021;2021:6419774.
    PMID: 34447852 DOI: 10.1155/2021/6419774
    Aim: This systematic review is aimed at investigating the biomechanical stress that develops in the maxillofacial prostheses (MFP) and supporting structures and methods to optimize it. Design and Methods. A literature survey was conducted for full-text English articles which used FEA to examine the stress developed in conventional and implant-assisted MFPs from January 2010 to December 2020.

    Results: 87 articles were screened to get an update on the desired information. 74 were excluded based on a complete screening, and finally, 13 articles were recruited for complete reviewing. Discussion. The MFP is subjected to stress, which is reflected in the form of compressive and tensile strengths. The stress is mainly concentrated the resection line and around the apices of roots of teeth next to the defect. Diversity of designs and techniques were introduced to optimize the stress distribution, such as modification of the clasp design, using materials with different mechanical properties for dentures base and retainer, use of dental (DI) and/or zygomatic implants (ZI), and free flap reconstruction before prosthetic rehabilitation.

    Conclusion: Using ZI in the defective side of the dentulous maxillary defect and defective and nondefective side of the edentulous maxillary defect was found more advantageous, in terms of compression and tensile stress and retention, when compared with DI and free flap reconstruction.

    Matched MeSH terms: Maxilla/surgery*
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links