Displaying publications 1 - 20 of 779 in total

Abstract:
Sort:
  1. Zulkifli, A.F., Tham, L.G., Perumal, N., Azzeme, A., Shukor, M.Y., Shaharuddin, N.A., et al.
    MyJurnal
    Acetylcholinesterase (AChE) is usually used as an inhibitive assay for insecticides. A lesser
    known property of AChE is its inhibition by heavy metals. In this work we evaluate an AChE
    from brains of striped snakehead (Channa striatus) wastes from aquaculture industry as an
    inhibitive assay for heavy metals. We discovered that the AChE was inhibited almost completely
    by Hg2+, Ag2+ and Cu2+ during an initial screening. When tested at various concentrations, the
    heavy metals exhibited exponential decay type inhibition curves. The calculated IC50 for the
    heavy metals Hg2+, Ag2+, Pb2+, Cu2+ and Cr6+ were 0.08432, 0.1008, 0.1255, 0.0871, and 0.1771,
    respectively. The IC50 for these heavy metals are comparable and some are lower than the IC50
    values from the cholinesterases from previously studied fish. The assay can be carried out in less
    than 30 minutes at ambient temperature.
    Matched MeSH terms: Metals, Heavy
  2. Zulkifli SZ, Ismail A, Mohamat-Yusuff F, Arai T, Miyazaki N
    Bull Environ Contam Toxicol, 2010 May;84(5):568-73.
    PMID: 20411236 DOI: 10.1007/s00128-010-9998-8
    Present study was conducted to evaluate current status of trace elements contamination in the surface sediments of the Johor Strait. Iron (2.54 +/- 1.24%) was found as the highest occurring element, followed by those of zinc (210.45 +/- 115.4 microg/g), copper (57.84 +/- 45.54 microg/g), chromium (55.50 +/- 31.24 microg/g), lead (52.52 +/- 28.41 microg/g), vanadium (47.76 +/- 25.76 microg/g), arsenic (27.30 +/- 17.11 microg/g), nickel (18.31 +/- 11.77 microg/g), cobalt (5.13 +/- 3.12 microg/g), uranium (4.72 +/- 2.52 microg/g), and cadmium (0.30 +/- 0.30 microg/g), respectively. Bioavailability of cobalt, nickel, copper, zinc, arsenic and cadmium were higher than 50% of total concentration. Vanadium, copper, zinc, arsenic and cadmium were found significantly different between the eastern and western part of the strait (p < 0.05). Combining with other factors, Johor Strait is suitable as a hotspot for trace elements contamination related studies.
    Matched MeSH terms: Metals, Heavy/analysis*
  3. Zulkernain NH, Uvarajan T, Ng CC
    J Environ Manage, 2023 Sep 01;341:117926.
    PMID: 37163837 DOI: 10.1016/j.jenvman.2023.117926
    Phytoremediation is a biological remediation technique known for low-cost technology and environmentally friendly approach, which employs plants to extract, stabilise, and transform various compounds, such as potentially toxic elements (PTEs), in the soil or water. Recent developments in utilising chelating agents soil remediation have led to a renewed interest in chelate-induced phytoremediation. This review article summarises the roles of various chelating agents and the mechanisms of chelate-induced phytoremediation. This paper also discusses the recent findings on the impacts of chelating agents on PTEs uptake and plant growth and development in phytoremediation. It was found that the chelating agents have increased the rate of metal absorption and translocation up to 45% from roots to the aboveground plant parts during PTEs phytoremediation. Besides, it was also explored that the plants may experience some phytotoxicity after adding chelating agents to the soil. However, due to the leaching potential of synthetic chelating agents, the use of organic chelants have been explored to be used in PTEs phytoremediation. Finally, this paper also presents comprehensive insights on the significance of using chelating agents through SWOT analysis to discuss the advantages and limitations of chelate-induced phytoremediation.
    Matched MeSH terms: Metals/analysis
  4. Zulkafflee NS, Mohd Redzuan NA, Hanafi Z, Selamat J, Ismail MR, Praveena SM, et al.
    PMID: 31795132 DOI: 10.3390/ijerph16234769
    Rice ingestion is one of the major pathways for heavy metal bioaccumulation in human. This study aimed to measure the heavy metal content of paddy soils and its bioavailability in paddy grain in order to assess the health risk. In total, 10 rice samples (50 g each) of paddy plants were harvested from the Selangor and Terengganu areas of Malaysia to assess the bioavailability of heavy metal (As, Cd, Cu, Cr, and Pb) using the in vitro digestion model of Rijksinstituut voor Volksgezondheid en Milieu. The bioavailability of heavy metal concentrations in rice samples were analyzed using Inductively Coupled Plasma Mass Spectrometry (ICP-MS). The findings showed the bioavailability of heavy metal concentrations was decreased in the order Cr > Cu > Pb > As > Cd. Chromium was found to be the most abundant bioavailable heavy metal in cooked rice, which was the result of its high content in paddy soil. Hazard Quotient values for the bioavailability of the heavy metal studied were less than one indicating no non-carcinogenic health risks for adults and children. Meanwhile, the total Lifetime Cancer Risk exceeded the acceptable value showing a potential of carcinogenic health risk for both adults and children. The application of in vitro digestion model in assessing bioavailability of heavy metal produces a more realistic estimation of human health risks exposure. However, a regular monitoring of pollution in Selangor and Terengganu areas is crucial since the exposure of heavy metals through rice consumption poses the potential non-carcinogenic and carcinogenic health risk to the local residents.
    Matched MeSH terms: Metals, Heavy/analysis*
  5. Zulfadli Ahmad, Saifuddin Normanbhay
    MyJurnal
    This paper reviews the literature on uranium contamination and the removal of uranium from wastewater stemming from mining activities and nuclear power generation. After reviewing the applications of uranium in power generation, military, industry and scientific, this review discusses uranium and rare earth elements in wastewaters and the toxicity of uranium on aquatic life and humans. Further, various methods of removal of heavy metal contaminants including uranium are reviewed with special focus on the adsorption process and carbon nanotubes as a superior adsorbent.
    Matched MeSH terms: Metals, Rare Earth
  6. Zulfadhly Z, Mashitah MD, Bhatia S
    Environ Pollut, 2001;112(3):463-70.
    PMID: 11291452
    The ability of Pycnoporus sanguineus to adsorb heavy metals from aqueous solution was investigated in fixed-bed column studies. The experiments were conducted to study the effect of important design parameters such as column bed height, flow rate and initial concentration of solution. The breakthrough profiles were obtained in these studies. A mathematical model based on external mass transfer and pore diffusion was used for the prediction of mass transfer coefficient and effective diffusivity of metals in macro-fungi bed. Experimental breakthrough profiles were compared with the simulated breakthrough profiles obtained from the mathematical model. Bed Depth Service Time (BDST) model was used to analyse the experimental data and evaluated the performance of biosorption column. The BDST model parameters needed for the design of biosorption columns were evaluated for lead, copper and cadmium removal in the column. The columns were regenerated by eluting the metal ions using 0.1 M hydrochloric acid solution after the adsorption studies. The columns were subjected to repeated cycles of adsorption of same metal ions and desorption to evaluate the removal efficiency after adsorption-desorption.
    Matched MeSH terms: Metals, Heavy/pharmacokinetics*; Metals, Heavy/chemistry
  7. Zubbri NA, Mohamed AR, Kamiuchi N, Mohammadi M
    Environ Sci Pollut Res Int, 2020 Apr;27(11):11809-11829.
    PMID: 31975005 DOI: 10.1007/s11356-020-07734-3
    This work is scrutinizing the development of metallized biochar as a low-cost bio-sorbent for low temperature CO2 capture with high adsorption capacity. Accordingly, single-step pyrolysis process was carried out in order to synthesize biochar from rambutan peel (RP) at different temperatures. The biochar product was then subjected to wet impregnation with several magnesium salts including magnesium nitrate, magnesium sulphate, magnesium chloride and magnesium acetate which then subsequently heat-treated with N2. The impregnation of magnesium into the biochar structure improved the CO2 capture performance in the sequence of magnesium nitrate > magnesium sulphate > magnesium chloride > magnesium acetate. There is an enhancement in CO2 adsorption capacity of metallized biochar (76.80 mg g-1) compare with pristine biochar (68.74 mg g-1). It can be justified by the synergetic influences of physicochemical characteristics. Gas selectivity study verified the high affinity of biochar for CO2 capture compared with other gases such as air, methane, and nitrogen. This investigation also revealed a stable performance of the metallized biochar in 25 cycles of CO2 adsorption and desorption. Avrami kinetic model accurately predicted the dynamic CO2 adsorption performance for pristine and metallized biochar.
    Matched MeSH terms: Metals
  8. Zhang X, Teng SY, Loy ACM, How BS, Leong WD, Tao X
    Nanomaterials (Basel), 2020 May 26;10(6).
    PMID: 32466377 DOI: 10.3390/nano10061012
    The material characteristics and properties of transition metal dichalcogenide (TMDCs) have gained research interest in various fields, such as electronics, catalytic, and energy storage. In particular, many researchers have been focusing on the applications of TMDCs in dealing with environmental pollution. TMDCs provide a unique opportunity to develop higher-value applications related to environmental matters. This work highlights the applications of TMDCs contributing to pollution reduction in (i) gas sensing technology, (ii) gas adsorption and removal, (iii) wastewater treatment, (iv) fuel cleaning, and (v) carbon dioxide valorization and conversion. Overall, the applications of TMDCs have successfully demonstrated the advantages of contributing to environmental conversation due to their special properties. The challenges and bottlenecks of implementing TMDCs in the actual industry are also highlighted. More efforts need to be devoted to overcoming the hurdles to maximize the potential of TMDCs implementation in the industry.
    Matched MeSH terms: Metals
  9. Zarcinas BA, Ishak CF, McLaughlin MJ, Cozens G
    Environ Geochem Health, 2004 Dec;26(4):343-57.
    PMID: 15719158
    In a reconnaisance soil geochemical and plant survey undertaken to study the heavy metal uptake by major food crops in Malaysia, 241 soils were analysed for cation exchange capacity (CEC), organic carbon (C), pH, electrical conductivity (EC) and available phosphorus (P) using appropriate procedures. These soils were also analysed for arsenic (As), cadmium (Cd), cobalt (Co), chromium (Cr), copper (Cu), mercury (Hg), nickel (Ni), lead (Pb) and zinc (Zn) using aqua regia digestion, together with 180 plant samples using nitric acid digestion. Regression analysis between the edible plant part and aqua regia soluble soil As, Cd, Cr, Cu, Hg, Ni, Pb and Zn concentrations sampled throughout Peninsular Malaysia, indicated a positive relationship for Pb in all the plants sampled in the survey (R2 = 0.195, p < 0.001), for Ni in corn (R2 = 0.649, p < 0.005), for Cu in chili (R2 = 0.344, p < 0.010) and for Zn in chili (R2 = 0.501, p < 0.001). Principal component analysis of the soil data suggested that concentrations of Co, Ni, Pb and Zn were strongly correlated with concentrations of Al and Fe, which is suggestive of evidence of background variations due to changes in soil mineralogy. Thus the evidence for widespread contamination of soils by these elements through agricultural activities is not strong. Chromium was correlated with soil pH and EC, Na, S, and Ca while Hg was not correlated with any of these components, suggesting diffuse pollution by aerial deposition. However As, Cd, Cu were strongly associated with organic matter and available and aqua regia soluble soil P, which we attribute to inputs in agricultural fertilisers and soil organic amendments (e.g. manures, composts).
    Matched MeSH terms: Metals, Heavy/analysis*
  10. Zalilah Murni Yunus, Norzila Othman, Rafidah Hamdan, Nurun Najwa Ruslan
    MyJurnal
    A combination of phosphoric acid (H3PO4) 20% v/v impregnation and carbonization method was employed to convert honeydew rind into activated carbons (ACPHDR) for Zn(II) and Cr(III) removal aqueous solution. The characterization of ACPDHR by N2 sorption, iodine number and Boehm analysis result 1272 m2/g surface area, 1174 mg/g and 1.13 mmol/g total acidic functional groups respectively. Fourier transform infrared (FTIR) and Field emission scanning electron microscopy-electron dispersed microscopy (FESEM-EDX) analysis of unloaded and metal-loaded carbon showed shifted of significance peaks and the changes of surface morphology of the sorbent. The adsorption was optimized at pH, shaking duration, initial metal concentration and mass of adsorbent of 5.5, 40 min and 500 mg/L, 0.4 g for Zn(II) and 4, 40 min, 1000 mg/L, 0.1 g for Cr(III) removal. It is concluded that the metal removal was influenced by pH solution, contact time, initial metal concentration and mass of adsorbent. The highest removal of Zn(II) and Cr(III) was observed at 84.24% and 90.10% respectively. Waste from honeydew will be benefited from this research which offer a cheaper alternative precursor to coal based activated carbons.
    Matched MeSH terms: Metals
  11. Zal U’yun Wan Mahmood, Zaharudin Ahmad, Che Abd Rahim Mohamed, Abdul Kadir Ishak, Norfaizal Mohammed
    MyJurnal
    The distribution, enrichment and pollution status of metals in sediment cores from the Sabah-Sarawak coastal waters were studied. Seven sediment cores were taken in July 2004 using a gravity box corer. The metals of Cu, Zn and Pb were analyzed by ICP-MS to assess the pollution status of the sediments. The sediment fine fraction and organic carbon content was also analyzed. Enrichment Factor (EF), Geoaccumulation Index (Igeo) and Pollution Load Index (PLI) was calculated as criteria of possible contamination. The results showed that collected sediments were composed with clay, silt and sand as 12 – 74%, 27 – 72% and 0 – 20%, respectively. Meanwhile, organic carbon contents were relatively low and constant over time, based on sediment depth profiles, and it did not exceed 5% at any sampling station. The average metal concentrations in sediment cores at all sampling station were distributed in the ranges of 1.66 ± 1.36 – 6.61 ± 0.12 μgg-1 for Cu, 26.55 ± 1.04 – 57.94 ± 1.58 μgg-1 for Zn and 3.99 ± 0.10 – 14.48 ± 0.32μgg-1 for Pb. According to calculations of EF, Igeo and PLI, it can be concluded that concentrations of Cu, Zn and Pb were not significantly affected by pollution from anthropogenic sources at the seven sampling locations. Thus, the metal content of Cu, Zn and Pb in sediment should not cause pollution problem to the marine environment of Sabah-Sarawak coastal waters and further response measures are not needed.
    Matched MeSH terms: Metals
  12. Zakaria, M.P., Yap, C.K., Eugene Ng, Y.J., Tan, S.G.
    MyJurnal
    In this study, a polluted site at Kg. Pasir Puteh was assessed for heavy metal pollution by using
    transplanted caged mussel (Perna viridis) from a relatively clean population, Sg. Melayu; both are located in the Strait of Johore. For control purposes, the P. viridis from Kg. Pasir Puteh were also simultaneously transplanted in Sg. Melayu at the same time. It was found that Zn was the metal which got accumulated fastest in the transplanted mussel while Cd was the slowest. This study indicated that the byssus of Perna viridis was most effective for biomonitoring of Cd, Ni, Pb and Zn, while the shell could be used for the biomonitoring of Cu, Ni and Pb and the total soft tissue for the biomonitoring of Ni since they were able to accumulate and eliminate the respective metals well. By using mussel as a biomonitor, the present study found that Kg. Pasir Puteh, which is located in the eastern part of the Strait of Johore, had significantly higher contamination and bioavailabilities of Cd, Cu, Fe, Ni, Pb and Zn. Therefore, the use of the transplanted caged mussels is very useful for heavy metal assessment purposes since it can increase the validity of data interpretation by minimizing ecological factors.
    Matched MeSH terms: Metals, Heavy
  13. Zakaria ZA, Zakaria Z, Surif S, Ahmad WA
    J Hazard Mater, 2007 Jul 19;146(1-2):30-8.
    PMID: 17188812
    Possible application of a locally isolated environmental isolate, Acinetobacter haemolyticus to remediate Cr(VI) contamination in water system was demonstrated. Cr(VI) reduction by A. haemolyticus seems to favour the lower concentrations (10-30 mg/L). However, incomplete Cr(VI) reduction occurred at 70-100 mg/L Cr(VI). Initial specific reduction rate increased with Cr(VI) concentrations. Cr(VI) reduction was not affected by 1 or 10 mM sodium azide (metabolic inhibitor), 10 mM of PO(4)3-, SO4(2-), SO(3)2-, NO3- or 30 mg/L of Pb(II), Zn(II), Cd(II) ions. However, heat treatment caused significant dropped in Cr(VI) reduction to less than 20% only. A. haemolyticus cells loses its shape and size after exposure to 10 and 50 mg Cr(VI)/L as revealed from TEM examination. The presence of electron-dense particles in the cytoplasmic region of the bacteria suggested deposition of chromium in the cells.
    Matched MeSH terms: Metals, Heavy/pharmacology
  14. Zakaria A, Ho YB
    Regul Toxicol Pharmacol, 2015 Oct;73(1):191-5.
    PMID: 26190304 DOI: 10.1016/j.yrtph.2015.07.005
    This study aimed to determine the heavy metals (lead, cadmium, and chromium) concentration in lipsticks of different price categories sold in the Malaysian market and evaluate the potential health risks due to daily ingestion of heavy metals in lipsticks. A total of 374 questionnaires were distributed to the female staff in a public university in Malaysia in order to obtain information such as brand and price of the lipsticks, body weight, and frequency and duration of wearing lipstick. This information was important for the calculation of hazard quotient (HQ) in health risk assessment. The samples were extracted using a microwave digester and analyzed using Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES). The concentrations of lead, cadmium, and chromium in lipsticks ranged from 0.77 to 15.44 mg kg(-1), 0.06-0.33 mg kg(-1), and 0.48-2.50 mg kg(-1), respectively. There was a significant difference of lead content in the lipsticks of different price categories. There was no significant non-carcinogenic health risk due to the exposure of these heavy metals through lipstick consumption for the prolonged exposure of 35 years (HQ < 1).
    Matched MeSH terms: Metals, Heavy
  15. Zaini NM, Lee HW, Mohamed KN, Sabuti AA, Suratman S, Ong MC
    Data Brief, 2020 Aug;31:105900.
    PMID: 32642516 DOI: 10.1016/j.dib.2020.105900
    Heavy metal pollution in an aquatic environment has become of the main concern to the world due to their non-biodegradable properties, toxicity, persistence, and their ability to adsorb into food chains. With rapid industrialization and development nowadays, heavy metals are introduced continuously into the estuaries and coastal region through rivers, runoff, and land-based point sources. These heavy metals may degrade the aquatic environment and harm the living organisms and toward human indirection through secondary contact. The dataset provided is to give an overview of the spatial and temporal distribution of the heavy metals concentration in Merang River surficial sediment collected from September 2017 to July 2018, subsequently every two months dataset. Sediment samples were collected in 44 stations along the river and 20 stations in the coastal area, which total up to 64 stations. Teflon Bomb closed digestion method with mixed acid was used to digest the sediments. The concentration of heavy metals in the sediment were analysed by using Inductively Coupled Plasma Mass Spectrometer (ICP-MS). The spatial distribution of heavy metals shows the effect of monsoon and wet and dry seasons in the sampling area. Thus, this dataset reveals six months of information on natural and anthropogenic sources intrusion at the Merang River and may also help in monitoring the pollution in the area.
    Matched MeSH terms: Metals, Heavy
  16. Zainal Abidin Talib, Liew, Josephine Ying Chyi, Zulkarnain Zainal, Mahmood Mat Yunus, W., Lim, Kean Pah, Wan M. Daud, Wan Yusoff, et al.
    MyJurnal
    This studies are directed towards measuring the electrical conductivity of the (CuSe)1-xSex metal chalcogenide semi-conductor composites, with different stoichiometric compositions of Se (x = 0, 0.2, 0.4, 0.5, 0.6, 0.8,1.0) in bulk form. The electrical conductivity measurement was carried out at room temperature, using the parallel plate technique. The (CuSe)1-xSex composites were prepared using solid state reaction, by varying the ratio of CuSe:Se, in the reaction mixture. The electrical conductivity of (CuSe)1-xSex was determined to be in the range of 1.17 x 10-8 to 1.02 x 10-1 S/cm. The finding indicated that the electrical conductivity value tended to decrease as the concentration of Se increased. The effect of the concentration of Se, on electrical conductivity of (CuSe)1-xSex composites, is discussed in this paper.
    Matched MeSH terms: Metals
  17. Zain SM, Basri H, Suja F, Jaafar O
    Water Sci Technol, 2002;46(9):303-8.
    PMID: 12448482
    Some of the major concerns when applying sewage sludge to land include the potential effect on pH and cation exchange capacity; the mobility and the accumulation of heavy metals in sludge treated soil; the potential of applying too much nutrients and the problems associated with odors and insects. The main objective of this study is to identify the effects of sewage sludge application on the physical and chemical properties of sludge treated soil. Sewage sludge was applied to soil at various rates ranging from 0 L/m2 to 341 L/m2. In order to simulate the natural environment, the study was carried out at a pilot treatment site (5.2 m x 6.7 m) in an open area, covered with transparent roofing material to allow natural sunlight to pass through. Simulated rain was applied by means of a sprinkler system. Data obtained from sludge treated soil showed that the pH values decreased when the application rates were increased and the application period prolonged. The effect of sewage sludge on cation exchange capacity was not so clear; the values obtained for every application rate of sewage sludge did not indicate any consistent behaviour. The mobility of heavy metals in soils treated with sludge were described by observing the changes in the concentration of the heavy metals. The study showed that Cd has the highest mobility in sludge treated soil followed by Cu, Cr, Zn, Ni and Pb.
    Matched MeSH terms: Metals, Heavy/analysis*; Metals, Heavy/chemistry
  18. Zaidi Embong
    MyJurnal
    This review briefly describes some of the techniques available for analysing surfaces and illustrates their usefulness with a few examples such as a metal and alloy. In particular, Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS) and laser Raman spectroscopy are all described as advanced surface analytical techniques. In analysing a surface, AES and XPS would normally be considered first, with AES being applied where high spatial resolution is required and XPS where chemical state information is needed. Laser Raman spectroscopy is useful for determining molecular bonding. A combination of XPS, AES and Laser Raman spectroscopy can give quantitative analysis from the top few atomic layers with a lateral spatial resolution of
    Matched MeSH terms: Metals
  19. Zaharani L, Ghaffari Khaligh N, Shahnavaz Z, Rafie Johan M
    Turk J Chem, 2020;44(3):535-542.
    PMID: 33488175 DOI: 10.3906/kim-2002-26
    In the current protocol, the arene diazonium saccharin derivatives were initially produced from various substituted aromatic amines; subsequently, these intermediates were treated with a greener organic iodide for the preparation of the aryl iodide. We tried to choose low-cost, commercially available, biodegradable, recoverable, ecofriendly, and safe reagents and solvents. The arene diazonium saccharin intermediates could be stored in the liquid phase into a refrigerator for a long time with no significant loss activity. The outstanding merits of the current protocol (a) included the partial recovering of saccharin and tetraethylammonium salt, (b) reduce the use of solvents and the reaction steps due to eliminating separation and purification of intermediates, (c) good yield of the sterically hindered substrates, and (d) avoid the generation of heavy metal or corrosive waste.
    Matched MeSH terms: Metals, Heavy
  20. Zafira Madzin, Faradiella Mohd Kusin, Mohd Shakirin Md Zahar, Siti Nurjaliah Muhammad
    MyJurnal
    The contamination of water bodies from heavy metals, either from natural sources or
    anthropogenic sources, has become a major concern to the public. Industrial activities with improper
    water treatment, and then leach into the water body, have become contaminated and harmful to
    consume. Passive remediation is one of the treatments introduced to counter this problem as it is a low
    cost but effective technique. After being widely acknowledged and through research conducted, the
    most suitable remediation technique found is the permeable reactive barriers (PRBs). PRB is defined
    as an in situ permeable treatment zone filled with reactive materials, designed to intercept and
    remediate a contaminant plume under natural hydraulic gradients. There have been many findings
    made from PRB which can be used to remove contaminants such as heavy metal, chlorinated solvents,
    carbonates and aromatic hydrocarbons. The most crucial criteria in making a successful PRB is the
    reactive media used to remove contaminants. The current paper presents an overview of the PRB
    selective medias that have been used and also the unresolved issue on the long term performance of
    PRB. The overall methodology for the application of PRB at a given site is also discussed in this
    paper. This inexpensive but effective technique is crucial as a sustainable technology in order to treat
    the drainage before it enters water tables to prevent water pollution and can be used as an alternative
    raw water source.
    Matched MeSH terms: Metals, Heavy
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links