Displaying publications 1 - 20 of 982 in total

Abstract:
Sort:
  1. Donworth P, Wesener T
    Zootaxa, 2024 Mar 08;5419(4):545-562.
    PMID: 38480309 DOI: 10.11646/zootaxa.5419.4.4
    Thailand hosts a very rich but underexplored giant pill-millipede (Sphaerotheriida) fauna, with 11 of its 13 species described in the last three years. Currently, all known Thai giant pill-millipedes belong to the genera Zephronia Gray, 1832 (nine species) and Sphaerobelum Verhoeff, 1924 (four species). Here we describe the first two species of the genus Prionobelum Verhoeff, 1924 (previously restricted to Vietnam and China), Prionobelum inthanonense n. sp. and P. naevium n. sp. from Thailand. The species occur at Thailands highest mountain (2500 m) Doi Inthanon and the lowland rainforests at Bang Lang National Park touching the border with Malaysia. Both species are described integratively, utilizing light microscopy, scanning electron microscopy as well as DNA barcoding. Both new species of Prionobelum differ from other Zephroniidae species, as well as from one another, by more than 20% p-distance in the COI barcoding gene suggesting that potential closer related species are still awaiting discovery.
    Matched MeSH terms: Microscopy, Electron, Scanning
  2. Chamathka WWDR, Chai TT, Phuah ET, Wong JX, Chen SN, Yassoralipour A
    Int J Biol Macromol, 2024 Mar;260(Pt 2):129637.
    PMID: 38262554 DOI: 10.1016/j.ijbiomac.2024.129637
    The research aimed to explore the potential of palm kernel meal (PKM) as a sustainable source of cellulose nanoparticles (CNPs) for active food packaging. The CNPs were isolated using a combination of chemical techniques, such as alkaline treatment, bleaching, and acid hydrolysis. The characterization of the CNPs was analysed using various techniques, including scanning electron microscopy, Fourier-transform infrared spectroscopy, X-ray diffraction, and UV-visible spectroscopy. The findings revealed that chemical processing effectively removed lignin and hemicellulose from PKM. The SEM morphology confirmed the separation of the CNPs, resulting in the production of 40-100 nm spherical cellulose nanoparticles, while XRD and FTIR analyses confirmed their purity and composition. Moreover, the UV-visible spectroscopy exhibited high transmittance rates, indicating the potential of CNPs as reinforcing agents for polymer matrices. The significance of utilising PKM as a valuable fibre source for extracting CNPs can be recommended for developing active food packaging.
    Matched MeSH terms: Microscopy, Electron, Scanning
  3. Sanggari A, Attah AO, Yahaya ZS, Farah Haziqah MT
    Trop Biomed, 2023 Dec 01;40(4):392-399.
    PMID: 38308825 DOI: 10.47665/tb.40.4.003
    Blastocystis is a prevalent infectious agent found in the gastrointestinal tract of humans and animals. While the morphology of Blastocystis has been extensively studied, there is still a lack of comprehensive research on its ultrastructure, especially regarding surface characteristics and their correlation with pathogenic potential. Additionally, the subtyping of Blastocystis does not provide information on the isolate's pathogenicity. This study aimed to examine the morphology and the cell surface of Blastocystis in avian and non-human primates, including peafowl, pheasant, and lion-headed tamarin. By employing light microscopy and scanning electron microscopy (SEM), this study provides the first evidence of the cellular and surface features of Blastocystis in these animal species. Our findings revealed distinct variations in cell size, shape, and surface morphology among the different host species. Notably, the isolates from peafowl exhibited larger cell sizes compared to the isolates from the pheasant. However, interestingly, both animal species were found to exhibit the same Blastocystis ST6. It was also observed that the surface structure of Blastocystis from different hosts displayed a diverse range of patterns, including mesh-like appearances, deep indentations, and attachments to bacteria. Additionally, findings also revealed the presence of a rough surface structure in peafowl, a characteristic that has been previously linked to pathogenicity and symptomatic infection in animals, as indicated by earlier studies. The findings contribute to our understanding of the morphological features and the surface characteristic of Blastocystis in different host species, shedding light on the parasite's adaptations and potential implications for host health.
    Matched MeSH terms: Microscopy, Electron, Scanning
  4. Jaafar NF, Nordin N, Mohamed Haris NY, Mohd Halim NH, Lahuri AH, Samad WZ
    Environ Sci Pollut Res Int, 2023 Apr;30(16):47144-47157.
    PMID: 36732455 DOI: 10.1007/s11356-023-25623-3
    In recent years, previously reported studies revealed a high efficiency of pollutant degradation by coupling photocatalysis and electrochemical processes (PECs) using titanium dioxide (TiO2) photoelectrode rather than using photocatalysis or electrocatalysis alone. However, some of the TiO2 photoelectrodes that have been reported were not cost-effective. This is due to the use of expensive chemicals and certain expensive equipment in the fabrication process, other than involving complicated preparation steps. Therefore, this study is aimed at investigating the PEC performance and stability of low-cost TiO2-polyvinyl chloride (TiO2-PVC) composite photoelectrode for Reactive Orange 16 (RO16) degradation. The materials characterisation using the ATR-FTIR, XRD and UV-Vis DRS proved that TiO2 and TiO2-PVC were successfully synthesised. The micrograph obtained for the surface characterisation using the FESEM showed that the smooth surface of freshly prepared photoelectrodes turned slightly rough with tiny pits formation after five continuous PEC processes. Nevertheless, the photoelectrode retained its original shape in good condition for further PEC processes. By PEC process, the fabricated photoelectrode showed 99.4% and 51.1% of colour and total organic carbon (TOC) removal, respectively, at optimised PEC parameters (1.0 mol L-1 NaCl concentration, 10 V applied voltage, 120 min degradation time and initial pH 2). Moreover, the fabricated photoelectrode demonstrated sufficient reusability potential (~ 96.3%) after five cycles of PEC processes. In summary, a low-cost and stable composite photoelectrode with high efficiency in RO16 degradation was successfully fabricated and could be potentially applied for other emerging pollutants degradation via the PEC degradation technique.
    Matched MeSH terms: Microscopy, Electron, Scanning
  5. Jayachandran D, Selvaraj S, Priya S, Kukkamalla MA, Senkalvarayan V
    Indian J Dent Res, 2023;34(1):19-23.
    PMID: 37417051 DOI: 10.4103/ijdr.ijdr_723_22
    BACKGROUND: The laser therapy has been used as an adjuvant for conventional periodontal disease as they exhibit a bactericidal effect on scaling and root planning by its thermal and photo disruptive effects on the pathogens. This study focuses on the structural and compositional changes induced on the root surfaces of teeth following diode laser (DL) application with increasing quantum of exposure time.

    OBJECTIVE: The objective of this study was to evaluate the structural and compositional changes on the root surface of extracted human permanent teeth after application of DLs (810 nm) with varying time interval.

    MATERIALS AND METHODS: Twenty samples of single-rooted periodontally compromised extracted teeth were utilized for this study. Root planning was done and the roughness caused by the instrumentation was measured using profilometric analysis. Then, the samples were divided into four groups, with DL application time: Group 1 - laser application for 15 s, Group 2 - laser application for 30 s, Group 3 - laser application for 45 s, and Group 4 - laser application for 60 s. A scanning electron microscope was used to examine the cemental surface and energy-dispersive X-ray analysis software assesses the compositional changes of the teeth in each group.

    RESULTS: This study reveals that on exposure of DL (810 nm) on the root surface when time of exposure increases, there were relative increases in surface irregularities and charring. There were significant changes in the chemical composition of the tooth surface.

    Matched MeSH terms: Microscopy, Electron, Scanning
  6. Farooq A, Bilgrami A, Faraz SA, Qazi FUR, Maqsood A, Altamash S, et al.
    J Appl Biomater Funct Mater, 2023;21:22808000231166210.
    PMID: 37029505 DOI: 10.1177/22808000231166210
    OBJECTIVES: This study aimed to compare the effectiveness of an experimental root canal irrigant and 17% Ethylene-di-amine tetra acetic acid for removal of the smear layer in the coronal, middle and apical portions of the root canal.

    MATERIALS AND METHODS: Ninety human single rooted maxillary and mandibular teeth were selected for this study. The teeth were randomly divided into two experimental groups and one control group as follows: Group A (Ethanolic extract of Sapindus Mukorossi), Group B (17% EDTA), and Group C (Distilled water). The root canals of all three groups were prepared with stainless steel K-files by means of the standard step-back technique and irrigated with 5.25% sodium hypo chloride. The teeth were decoronated, following the irrigation and divided longitudinally into two-halves and visualized using scanning electron microscope (SEM) for the amount of smear layer present utilizing the three-point score system. The observations were noted both before and after the treatment. Nonparametric tests were applied for the comparison and p-value ⩽ 0.05 was considered as statistically significant.

    RESULTS: It was evident from that smear layer was completely removed in coronal portion of 27 out of 30 teeth in-group A. For middle and apical areas of group A, 24 and 19 teeth showed complete smear layer removal. In-group B it was found that there were 24, 21, and 3 teeth at coronal, middle and apical, areas respectively where smear layer were completely absent. Intra group comparison showed a significant difference (p = 0.002) in smear layer removal was found for group A at coronal, middle and apical thirds. Similarly, a significant difference (p = 0.001) was also found for group B; however heavy smear layer was found among the three parts of the canal for group C.

    CONCLUSIONS: Ethanolic extract of Sapindus Mukorossi have higher effectiveness in removing the smear layer from the root canal in comparison to 17% EDTA.

    Matched MeSH terms: Microscopy, Electron, Scanning
  7. Zulkefli NN, Noor Azam AMI, Masdar MS, Baharuddin NA, Wan Isahak WNR, Mohd Sofian N
    Molecules, 2022 Dec 17;27(24).
    PMID: 36558155 DOI: 10.3390/molecules27249024
    This study reports on the synthesis of bi-metal compound (BMC) adsorbents based on commercial coconut activated carbon (CAC), surface-modified with metal acetate (ZnAc2), metal oxide (ZnO), and the basic compounds potassium hydroxide (KOH) and sodium hydroxide (NaOH). The adsorbents were then characterized by scanning electron microscopy and elemental analysis, microporosity analysis through Brunauer-Emmett-Teller (BET) analysis, and thermal stability via thermogravimetric analysis. Adsorption-desorption test was conducted to determine the adsorption capacity of H2S via 1 L adsorber and 1000 ppm H2S balanced 49.95% for N2 and CO2. Characterization results revealed that the impregnated solution homogeneously covered the adsorbent surface, morphology, and properties. The adsorption test result reveals that the ZnAc2/ZnO/CAC_B had a higher H2S breakthrough adsorption capacity and performed at larger than 90% capability compared with a single modified adsorbent (ZnAc2/CAC). Therefore, the synthesized BMC adsorbents have a high H2S loading, and the abundance and low cost of CAC may lead to favorable adsorbents in H2S captured.
    Matched MeSH terms: Microscopy, Electron, Scanning
  8. Promsuwan K, Soleh A, Saisahas K, Saichanapan J, Kanatharana P, Thavarungkul P, et al.
    J Colloid Interface Sci, 2021 Sep;597:314-324.
    PMID: 33872888 DOI: 10.1016/j.jcis.2021.03.162
    A unique nanocomposite was fabricated using negatively charged manganese dioxide nanoparticles, poly (3,4-ethylenedioxythiophene) and reduced graphene oxide (MnO2/PEDOT/rGO). The nanocomposite was deposited on a glassy carbon electrode (GCE) functionalized with amino groups. The modified GCE was used to electrochemically detect dopamine (DA). The surface morphology, charge effect and electrochemical behaviours of the modified GCE were characterized by scanning electron microscopy, energy dispersive X-ray analysis (EDX), cyclic voltammetry and electrochemical impedance spectroscopy, respectively. The MnO2/PEDOT/rGO/GCE exhibited excellent performance towards DA sensing with a linear range between 0.05 and 135 µM with a lowest detection limit of 30 nM (S/N = 3). Selectivity towards DA was high in the presence of high concentrations of the typical interferences ascorbic acid and uric acid. The stability and reproducibility of the electrode were good. The sensor accurately determined DA in human serum. The synergic effect of the multiple components of the fabricated nanocomposite were critical to the good DA sensing performance. rGO provided a conductive backbone, PEDOT directed the uniform growth of MnO2 and adsorbed DA via pi-pi and electrostatic interaction, while the negatively charged MnO2 provided adsorption and catalytic sites for protonated DA. This work produced a promising biosensor that sensitively and selectively detected DA.
    Matched MeSH terms: Microscopy, Electron, Scanning
  9. Jensen K, Pen IAM, Caira JN
    Zootaxa, 2021 Jul 12;4999(3):201-218.
    PMID: 34810491 DOI: 10.11646/zootaxa.4999.3.1
    The Rhoptrobothriidae are one of the more enigmatic families of cestodes of elasmobranchs. Opinions on the taxonomic status of the familys three original genera (i.e., Myzophyllobothrium, Rhoptrobothrium, and Myzocephalus) have varied over the 115 years since they were erected. Some authors have considered all three valid, others have considered Rhoptrobothrium to be a synonym of Myzopyllobothrium or a genus inquirendum, yet others have considered Myzocephalus to be a synonym of the phyllobothriid genus Thysanocephalum. All three genera were established for specimens collected from eagle rays off Sri Lanka. The erection of Mixophyllobothrium for two specimens from a cowtail stingray off India three decades ago added additional confusion to the situation, with some authors considering it valid and others a synonym of Myzocephalus. These disagreements stem largely from differences in interpretation of the complex morphology of the scolex of members of these genera. Furthermore, with the exception of Rhoptrobothrium comprising four species, each genus is monotypic. All but Rhoptrobothrium has not been considered in detail for nearly a century, largely because of a lack of available material. The taxonomic status of these genera is assessed here based on light and scanning electron microscopy, and molecular data generated from new material collected from eagle rays off Indonesian and Malaysian Borneo, Japan, Sri Lanka, and Viet Nam. Morphological work indicates that the genera differ largely only in the degree of folding of the four remi that extend from the cephalic peduncle. A molecular phylogeny based on sequence data for the D1D3 region of the 28S rRNA gene, which include new data for eight specimens of four species, indicates that Myzophyllobothrium, Myzocephalus, and Rhoptrobothrium are not mutually monophyletic. The latter two genera and Mixophyllobothrium are considered synonyms of Myzophyllobothrium and five species are transferred to that genus. Myzophyllobothrium okamuri n. comb. is considered a species inquirendum. Myzophyllobothrium nagasawai n. sp. is described from Aetobatus narutobiei off Japan. Myzophyllobothrium narinari n. comb. is re-described based on newly collected cestodes from the type host and locality (i.e., Aetobatus ocellatus off Sri Lanka). Despite consisting of only a single genus, the family status of the group is retained in recognition of the unusual configuration of the scolex, which bears four biloculate bothridia and four remi extending from the cephalic peduncle. The ordinal placement of the family remains uncertain, but affinities with the Phyllobothriidea, rather than Tetraphyllidea are considered.
    Matched MeSH terms: Microscopy, Electron, Scanning
  10. Mohammed NJ, Othman NK, Taib MFM, Samat MH, Yahya S
    Molecules, 2021 Jun 09;26(12).
    PMID: 34207914 DOI: 10.3390/molecules26123535
    Extracts from plant materials have great potential as alternatives to inorganic corrosion inhibitors, which typically have harmful consequences. Experimental and theoretical methodologies studied the effectiveness of agricultural waste, namely, date palm seed extract as a green anti-corrosive agent in 0.5 M hydrochloric acid. Experimental results showed that immersion time and temperature are closely related to the effectivity of date palm seed as a corrosion inhibitor. The inhibition efficiency reduced from 95% to 91% at 1400 ppm when the immersion time was increased from 72 h to 168 h. The experimental results also indicated that the inhibition efficiency decreased as the temperature increased. The presence of a protective layer of organic matter was corroborated by scanning electron microscopy. The adsorption studies indicated that date palm seed obeyed Langmuir adsorption isotherm on the carbon steel surface, and Gibbs free energy values were in the range of -33.45 to -38.41 kJ·mol-1. These results suggested that the date palm seed molecules interacted with the carbon steel surface through mixture adsorption. Theoretical calculations using density functional theory showed that the capability to donate and accept electrons between the alloy surface and the date palm seed inhibitor molecules is critical for adsorption effectiveness. The HOMO and LUMO result indicated that the carboxyl (COOH) group and C=C bond were the most active sites for the electron donation-acceptance type of interaction and most auxiliary to the adsorption process over the Fe surface.
    Matched MeSH terms: Microscopy, Electron, Scanning/methods
  11. Syarifah SM, Mohd Kassim AS, Mohd Aripin A, Chan CM, Zainulabidin MH, Ishak N, et al.
    Data Brief, 2021 Jun;36:107030.
    PMID: 34026964 DOI: 10.1016/j.dib.2021.107030
    This article presents experimental data on oil palm biomass (oil palm leaves, oil palm trunk and empty fruit bunch) handsheet production characterization by biodelignification treatment using Bacillus cereus extracted from termite gut (Coptotermus curvignathus). It associates the lignocellulose chemical composition obtained via technical association pulp and paper industry TAPPI T 222 om-02 testing on lignin content reduction determination, holocellulose and hemicellulose content determination (Kurscher-Hoffner method). Several data obtained for handsheet characterization presents brightness, opacity, contrast ratio, din transparency, thickness, bursting and tearing indexes are collected. Handsheet surface morphology was also observed on ratio of gaps differences between fiber bonding conducted using scanning electron microscope (SEM) and ImageJ software. The raw data findings supplement chemical composition analysis for both untreated and treated substrates on handsheet quality performance check as presented in the research article "Bio-Mechanical Pulping of Bacteria Pre-Treatment on Oil Palm Biomass for Handsheet Production" [1]. For understanding correlations into the difference among lignocellulose content composition which affect the handsheet formation and mechanical strength refer to article from this research [1]. This dataset is made publicly available for optimizing alternative waste material reuse in the pulp and paper industrial section.
    Matched MeSH terms: Microscopy, Electron, Scanning
  12. Johari MAF, Mazlan SA, Nasef MM, Ubaidillah U, Nordin NA, Aziz SAA, et al.
    Sci Rep, 2021 May 25;11(1):10936.
    PMID: 34035434 DOI: 10.1038/s41598-021-90484-0
    The widespread use of magnetorheological elastomer (MRE) materials in various applications has yet to be limited due to the fact that there are substantial deficiencies in current experimental and theoretical research on its microstructural durability behavior. In this study, MRE composed of silicon rubber (SR) and 70 wt% of micron-sized carbonyl iron particles (CIP) was prepared and subjected to stress relaxation evaluation by torsional shear load. The microstructure and particle distribution of the obtained MRE was evaluated by a field emission scanning electron microscopy (FESEM). The influence of constant low strain at 0.01% is the continuing concern within the linear viscoelastic (LVE) region of MRE. Stress relaxation plays a significant role in the life cycle of MRE and revealed that storage modulus was reduced by 8.7%, normal force has weakened by 27%, and stress performance was reduced by 6.88% along approximately 84,000 s test duration time. This time scale was the longest ever reported being undertaken in the MRE stress relaxation study. Novel micro-mechanisms that responsible for the depleted performance of MRE was obtained by microstructurally observation using FESEM and in-phase mode of atomic force microscope (AFM). Attempts have been made to correlate strain localization produced by stress relaxation, with molecular deformation in MRE amorphous matrix. Exceptional attention was focused on the development of molecular slippage, disentanglement, microplasticity, microphase separation, and shear bands. The relation between these microstructural phenomena and the viscoelastic properties of MRE was diffusely defined and discussed. The presented MRE is homogeneous with uniform distribution of CIP. The most significant recent developments of systematic correlation between the effects of microstructural deformation and durability performance of MRE under stress relaxation has been observed and evaluated.
    Matched MeSH terms: Microscopy, Electron, Scanning
  13. Akhtar MN, Khan M, Khan SA, Afzal A, Subbiah R, Ahmad SN, et al.
    Materials (Basel), 2021 May 18;14(10).
    PMID: 34070060 DOI: 10.3390/ma14102639
    In the present investigation, the non-recrystallization temperature (TNR) of niobium-microalloyed steel is determined to plan rolling schedules for obtaining the desired properties of steel. The value of TNR is based on both alloying elements and deformation parameters. In the literature, TNR equations have been developed and utilized. However, each equation has certain limitations which constrain its applicability. This study was completed using laboratory-grade low-carbon Nb-microalloyed steels designed to meet the API X-70 specification. Nb- microalloyed steel is processed by the melting and casting process, and the composition is found by optical emission spectroscopy (OES). Multiple-hit deformation tests were carried out on a Gleeble® 3500 system in the standard pocket-jaw configuration to determine TNR. Cuboidal specimens (10 (L) × 20 (W) × 20 (T) mm3) were taken for compression test (multiple-hit deformation tests) in gleeble. Microstructure evolutions were carried out by using OM (optical microscopy) and SEM (scanning electron microscopy). The value of TNR determined for 0.1 wt.% niobium bearing microalloyed steel is ~ 951 °C. Nb- microalloyed steel rolled at TNR produce partially recrystallized grain with ferrite nucleation. Hence, to verify the TNR value, a rolling process is applied with the finishing rolling temperature near TNR (~951 °C). The microstructure is also revealed in the pancake shape, which confirms TNR.
    Matched MeSH terms: Microscopy, Electron, Scanning
  14. Abdullah CK, Ismail I, Nurul Fazita MR, Olaiya NG, Nasution H, Oyekanmi AA, et al.
    Polymers (Basel), 2021 May 17;13(10).
    PMID: 34067604 DOI: 10.3390/polym13101615
    The effect of incorporating different loadings of oil palm bio-ash nanoparticles from agriculture waste on the properties of phenol-formaldehyde resin was investigated in this study. The bio-ash filler was used to enhance the performance of phenol-formaldehyde nanocomposites. Phenol-formaldehyde resin filled with oil palm bio-ash nanoparticles was prepared via the in-situ polymerization process to produce nanocomposites. The transmission electron microscope and particle size analyzer result revealed that oil palm bio-ash nanoparticles had a spherical geometry of 90 nm. Furthermore, X-ray diffraction results confirmed the formation of crystalline structure in oil palm bio-ash nanoparticles and phenol-formaldehyde nanocomposites. The thermogravimetric analysis indicated that the presence of oil palm bio-ash nanoparticles enhanced the thermal stability of the nanocomposites. The presence of oil palm bio-ash nanoparticles with 1% loading in phenol-formaldehyde resin enhanced the internal bonding strength of plywood composites. The scanning electron microscope image revealed that phenol-formaldehyde nanocomposites morphology had better uniform distribution and dispersion with 1% oil palm bio-ash nanoparticle loading than other phenol-formaldehyde nanocomposites produced. The nanocomposite has potential use in the development of particle and panel board for industrial applications.
    Matched MeSH terms: Microscopy, Electron, Scanning
  15. Hagar MN, Yazid F, Luchman NA, Ariffin SHZ, Wahab RMA
    BMC Oral Health, 2021 May 15;21(1):263.
    PMID: 33992115 DOI: 10.1186/s12903-021-01621-0
    BACKGROUND: Mesenchymal stem cells isolated from the dental pulp of primary and permanent teeth can be differentiated into different cell types including osteoblasts. This study was conducted to compare the morphology and osteogenic potential of stem cells from exfoliated deciduous teeth (SHED) and dental pulp stem cells (DPSC) in granular hydroxyapatite scaffold (gHA). Preosteoblast cells (MC3T3-E1) were used as a control group.

    METHODOLOGY: The expression of stemness markers for DPSC and SHED was evaluated using reverse transcriptase-polymerase chain reaction (RT-PCR). Alkaline phosphatase assay was used to compare the osteoblastic differentiation of these cells (2D culture). Then, cells were seeded on the scaffold and incubated for 21 days. Morphology assessment using field emission scanning electron microscopy (FESEM) was done while osteogenic differentiation was detected using ALP assay (3D culture).

    RESULTS: The morphology of cells was mononucleated, fibroblast-like shaped cells with extended cytoplasmic projection. In RT-PCR study, DPSC and SHED expressed GAPDH, CD73, CD105, and CD146 while negatively expressed CD11b, CD34 and CD45. FESEM results showed that by day 21, dental stem cells have a round like morphology which is the morphology of osteoblast as compared to day 7. The osteogenic potential using ALP assay was significantly increased (p 

    Matched MeSH terms: Microscopy, Electron, Scanning
  16. Khan MA, Nayan N, Shadiullah, Ahmad MK, Fhong SC, Tahir M, et al.
    Molecules, 2021 May 04;26(9).
    PMID: 34064537 DOI: 10.3390/molecules26092700
    In this work, advanced nanoscale surface characterization of CuO Nanoflowers synthesized by controlled hydrothermal approach for significant enhancement of catalytic properties has been investigated. The CuO nanoflower samples were characterized by field-emission scanning electron microscopy (FE-SEM), X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, high-resolution transmission electron microscopy (HR-TEM), selected-area electron diffraction (SAED), high-angular annular dark field scanning transmission electron microscopy (HAADF-STEM) with elemental mapping, energy dispersive spectroscopy (STEM-EDS) and UV-Vis spectroscopy techniques. The nanoscale analysis of the surface study of monodispersed individual CuO nanoflower confirmed the fine crystalline shaped morphology composed of ultrathin leaves, monoclinic structure and purified phase. The result of HR-TEM shows that the length of one ultrathin leaf of copper oxide nanoflower is about ~650-700 nm, base is about ~300.77 ± 30 nm and the average thickness of the tip of individual ultrathin leaf of copper oxide nanoflower is about ~10 ± 2 nm. Enhanced absorption of visible light ~850 nm and larger value of band gap energy (1.68 eV) have further supported that the as-grown material (CuO nanoflowers) is an active and well-designed surface morphology at the nanoscale level. Furthermore, significant enhancement of catalytic properties of copper oxide nanoflowers in the presence of H2O2 for the degradation of methylene blue (MB) with efficiency ~96.7% after 170 min was obtained. The results showed that the superb catalytic performance of well-fabricated CuO nanoflowers can open a new way for substantial applications of dye removal from wastewater and environment fields.
    Matched MeSH terms: Microscopy, Electron, Scanning; Microscopy, Electron, Scanning Transmission
  17. Amri MR, Guan CT, Osman Al-Edrus SS, Md Yasin F, Mohamad SF
    Polymers (Basel), 2021 Apr 30;13(9).
    PMID: 33946517 DOI: 10.3390/polym13091460
    The objective of this work was to study the influence of cellulose nanofibrils (CNF) on the physical, mechanical, and thermal properties of Jatropha oil-based waterborne polyurethane (WBPU) nanocomposite films. The polyol to produce polyurethane was synthesized from crude Jatropha oil through epoxidation and ring-opening method. The chain extender, 1,6-hexanediol, was used to improve film elasticity by 0.1, 0.25, and 0.5 wt.% of CNF loading was incorporated to enhance film performance. Mechanical performance was studied using a universal test machine as specified in ASTM D638-03 Type V and was achieved by 0.18 MPa at 0.5 wt.% of CNF. Thermal gravimetric analysis (TGA) was performed to measure the temperature of degradation and the chemical crosslinking and film morphology were studied using Fourier-transform infrared spectroscopy (FTIR) and field emission scanning electron microscopy (FESEM). The results showed that when the CNF was incorporated, it was found to enhance the nanocomposite film, in particular its mechanical and thermal properties supported by morphology. Nanocomposite film with 0.5 wt.% of CNF showed the highest improvement in terms of tensile strength, Young's modulus, and thermal degradation. Although the contact angle decreases as the CNF content increases, the effect on the water absorption of the film was found to be relatively small (<3.5%). The difference between the neat WPBU and the highest CNF loading film was not more than 1%, even after 5 days of being immersed in water.
    Matched MeSH terms: Microscopy, Electron, Scanning
  18. Ali A, Andriyana A, Hassan SBA, Ang BC
    Polymers (Basel), 2021 Apr 29;13(9).
    PMID: 33947012 DOI: 10.3390/polym13091437
    The development of advanced composite materials has taken center stage because of its advantages over traditional materials. Recently, carbon-based advanced additives have shown promising results in the development of advanced polymer composites. The inter- and intra-laminar fracture toughness in modes I and II, along with the thermal and electrical conductivities, were investigated. The HMWCNTs/epoxy composite was prepared using a multi-dispersion method, followed by uniform coating at the mid-layers of the CF/E prepregs interface using the spray coating technique. Analysis methods, such as double cantilever beam (DCB) and end notched flexure (ENF) tests, were carried out to study the mode I and II fracture toughness. The surface morphology of the composite was analyzed using field emission scanning electron microscopy (FESEM). The DCB test showed that the fracture toughness of the 0.2 wt.% and 0.4 wt.% HMWCNT composite laminates was improved by 39.15% and 115.05%, respectively, compared with the control sample. Furthermore, the ENF test showed that the mode II interlaminar fracture toughness for the composite laminate increased by 50.88% and 190%, respectively. The FESEM morphology results confirmed the HMWCNTs bridging at the fracture zones of the CF/E composite and the improved interlaminar fracture toughness. The thermogravimetric analysis (TGA) results demonstrated a strong intermolecular bonding between the epoxy and HMWCNTs, resulting in an improved thermal stability. Moreover, the differential scanning calorimetry (DSC) results confirmed that the addition of HMWCNT shifted the Tg to a higher temperature. An electrical conductivity study demonstrated that a higher CNT concentration in the composite laminate resulted in a higher conductivity improvement. This study confirmed that the demonstrated dispersion technique could create composite laminates with a strong interfacial bond interaction between the epoxy and HMWCNT, and thus improve their properties.
    Matched MeSH terms: Microscopy, Electron, Scanning
  19. Jumaidin R, Diah NA, Ilyas RA, Alamjuri RH, Yusof FAM
    Polymers (Basel), 2021 Apr 28;13(9).
    PMID: 33924842 DOI: 10.3390/polym13091420
    Increasing environmental concerns have led to greater attention to the development of biodegradable materials. The aim of this paper is to investigate the effect of banana leaf fibre (BLF) on the thermal and mechanical properties of thermoplastic cassava starch (TPCS). The biocomposites were prepared by incorporating 10 to 50 wt.% BLF into the TPCS matrix. The samples were characterised for their thermal and mechanical properties. The results showed that there were significant increments in the tensile and flexural properties of the materials, with the highest strength and modulus values obtained at 40 wt.% BLF content. Thermogravimetric analysis showed that the addition of BLF had increased the thermal stability of the material, indicated by higher-onset decomposition temperature and ash content. Morphological studies through scanning electron microscopy (SEM) exhibited a homogenous distribution of fibres and matrix with good adhesion, which is crucial in improving the mechanical properties of biocomposites. This was also attributed to the strong interaction of intermolecular hydrogen bonds between TPCS and fibre, proven by the FT-IR test that observed the presence of O-H bonding in the biocomposite.
    Matched MeSH terms: Microscopy, Electron, Scanning
  20. Shitu IG, Liew JYC, Talib ZA, Baqiah H, Awang Kechik MM, Ahmad Kamarudin M, et al.
    ACS Omega, 2021 Apr 27;6(16):10698-10708.
    PMID: 34056223 DOI: 10.1021/acsomega.1c00148
    A rapid, sustainable, and ecologically sound approach is urgently needed for the production of semiconductor nanomaterials. CuSe nanoparticles (NPs) were synthesized via a microwave-assisted technique using CuCl2·2H2O and Na2SeO3 as the starting materials. The role of the irradiation time was considered as the primary concern to regulate the size and possibly the shape of the synthesized nanoparticles. A range of characterization techniques was used to elucidate the structural and optical properties of the fabricated nanoparticles, which included X-ray diffraction, energy-dispersive X-ray spectroscopy (EDX), atomic force microscopy, field emission scanning electron microscopy, Raman spectroscopy (Raman), UV-Visible diffuse reflectance spectroscopy (DRS), and photoluminescence spectroscopy (PL). The mean crystallite size of the CuSe hexagonal (Klockmannite) crystal structure increased from 21.35 to 99.85 nm with the increase in irradiation time. At the same time, the microstrain and dislocation density decreased from 7.90 × 10-4 to 1.560 × 10-4 and 4.68 × 10-2 to 1.00 × 10-2 nm-2, respectively. Three Raman vibrational bands attributed to CuSe NPs have been identified in the Raman spectrum. Irradiation time was also seen to play a critical role in the NP optical band gap during the synthesis. The decrease in the optical band gap from 1.85 to 1.60 eV is attributed to the increase in the crystallite size when the irradiation time was increased. At 400 nm excitation wavelength, a strong orange emission centered at 610 nm was observed from the PL measurement. The PL intensity is found to increase with an increase in irradiation time, which is attributed to the improvement in crystallinity at higher irradiation time. Therefore, the results obtained in this study could be of great benefit in the field of photonics, solar cells, and optoelectronic applications.
    Matched MeSH terms: Microscopy, Electron, Scanning
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links