Displaying publications 1 - 20 of 734 in total

Abstract:
Sort:
  1. Lum PT, Sekar M, Gan SH, Bonam SR, Shaikh MF
    ACS Chem Neurosci, 2021 Feb 03;12(3):391-418.
    PMID: 33475334 DOI: 10.1021/acschemneuro.0c00824
    Huntington's disease (HD), a neurodegenerative disease, normally starts in the prime of adult life, followed by a gradual occurrence of characteristic psychiatric disturbances and cognitive and motor dysfunction. To the best of our knowledge, there is no treatment available to completely mitigate the progression of HD. Among various therapeutic approaches, exhaustive literature reports have confirmed the medicinal benefits of natural products in HD experimental models. Building on this information, this review presents a brief overview of the neuroprotective mechanism(s) of natural products against in vitro/in vivo models of HD. Relevant studies were identified from several scientific databases, including PubMed, ScienceDirect, Scopus, and Google Scholar. After screening through literature from 2005 to the present, a total of 14 medicinal plant species and 30 naturally isolated compounds investigated against HD based on either in vitro or in vivo models were included in the present review. Behavioral outcomes in the HD in vivo model showed that natural compounds significantly attenuated 3-nitropropionic acid (3-NP) induced memory loss and motor incoordination. The biochemical alteration has been markedly alleviated with reduced lipid peroxidation, increased endogenous enzymatic antioxidants, reduced acetylcholinesterase activity, and increased mitochondrial energy production. Interestingly, following treatment with certain natural products, 3-NP-induced damage in the striatum was ameliorated, as seen histologically. Overall, natural products afforded varying degrees of neuroprotection in preclinical studies of HD via antioxidant and anti-inflammatory properties, preservation of mitochondrial function, inhibition of apoptosis, and induction of autophagy.
    Matched MeSH terms: Models, Theoretical
  2. Akbari A, Mohammadian E, Alavi Fazel SA, Shanbedi M, Bahreini M, Heidari M, et al.
    ACS Omega, 2019 Apr 30;4(4):7038-7046.
    PMID: 31459815 DOI: 10.1021/acsomega.9b00176
    Many studies have investigated natural convection heat transfer from the outside surface of horizontal and vertical cylinders in both constant heat flux and temperature conditions. However, there are poor studies in natural convection from inclined cylinders. In this study, free convection heat transfer was examined experimentally from the outside surface of a cylinder for glycerol and water at various heat fluxes. The tests were performed at 10 different inclination angles of the cylinder, namely, φ = 0°, 10°, 20°, 30°, 40°, 50°, 60°, 70°, 80°, and 90°, measured from the horizon. Our results indicated that the average Nusselt number reduces with the growth in the inclination of the cylinder to the horizon at the same heat flux, and the average Nusselt number enhanced with the growth in heat flux at the same angle. Also, the average Nusselt number of water is greater than that of glycerol. A new experimental model for predicting the average Nusselt number is suggested, which has a satisfactory accuracy for experimental data.
    Matched MeSH terms: Models, Theoretical
  3. Zentou H, Zainal Abidin Z, Yunus R, Awang Biak DR, Abdullah Issa M, Yahaya Pudza M
    ACS Omega, 2021 Feb 16;6(6):4137-4146.
    PMID: 33644536 DOI: 10.1021/acsomega.0c04025
    Despite the advantages of continuous fermentation whereby ethanol is selectively removed from the fermenting broth to reduce the end-product inhibition, this process can concentrate minor secondary products to the point where they become toxic to the yeast. This study aims to develop a new mathematical model do describe the inhibitory effect of byproducts on alcoholic fermentation including glycerol, lactic acid, acetic acid, and succinic acid, which were reported as major byproducts during batch alcoholic fermentation. The accumulation of these byproducts during the different stages of batch fermentation has been quantified. The yields of total byproducts, glycerol, acetic acid, and succinic acid per gram of glucose were 0.0442, 0.023, 0.0155, and 0.0054, respectively. It was found that the concentration of these byproducts linearly increases with the increase in glucose concentration in the range of 25-250 g/L. The results have also showed that byproduct concentration has a significant inhibitory effect on specific growth coefficient (μ) whereas no effect was observed on the half-velocity constant (Ks). A new mathematical model of alcoholic fermentation was developed considering the byproduct inhibitory effect, which showed a good performance and more accuracy compared to the classical Monod model.
    Matched MeSH terms: Models, Theoretical
  4. Eghbali Babadi F, Yunus R, Masoudi Soltani S, Shotipruk A
    ACS Omega, 2021 May 04;6(17):11144-11154.
    PMID: 34056270 DOI: 10.1021/acsomega.0c04353
    In this study, a mineral-based coated urea was fabricated in a rotary pan coater using a mixture of gypsum/sulfur/zeolite (G25S25Z50) as an effective and low-cost coating material. The effects of different coating compositions on the dissolution rate of urea and the crushing strength and morphology of the coated urea were investigated. A 25:25:50 (wt %) mixture of gypsum/sulfur/zeolite (G25S25Z50) increased the coating effectiveness to 34.1% with the highest crushing strength (31.06 N). The effectiveness of coated urea was further improved to 46.6% with the addition of a microcrystalline wax (3%) as a sealant. Furthermore, the release mechanisms of various urea fertilizers were determined by fitting the release profiles with six mathematical models, namely, the zeroth-order, first-order, second-order, Higuchi, Ritger & Peppas, and Kopcha models. The results showed that the release mechanism of the uncoated urea and all other coated urea followed the Ritger & Peppas model, suggesting the diffusional release from nonswellable delivery systems. In addition, due to the increased mass-transfer resistance, the kinetic constant was decreased from 0.2233 for uncoated urea to 0.1338 for G25S25Z50-coated urea and was further decreased to 0.0985 when 3% Witcovar 146 sealant was applied.
    Matched MeSH terms: Models, Theoretical
  5. Ahmad, M.H., Norzaie, J., Al Qbadi, F., Daniel, B.D.
    ASM Science Journal, 2009;3(1):17-26.
    MyJurnal
    The functions of dams are for water supply, flood control and hydroelectric power generation. A concrete faced rockfill dam (CFRD) is preferred by dam consultants due to its many advantages. It is designed to withstand all applied loads, namely gravity load due to its massive weight and hydrostatic load due to water thrust from the reservoir. The structural response of the Bakun CFRD which is the second highest dam in the world after the Shuibuya Dam, was analyzed using finite element method. A two-dimensional plane strain finite element analysis of the non-linear Duncan-Chang hyperbolic model was used in the study of the dam in respect to the deformation and stresses of the main dam of Bakun CFRD project. The Dead-Birth-Ghost element technique was used to simulate sequences of the construction of the dam. The comparison of rigid and flexible foundation on the behaviour of the dam is discussed in this study. In the finite element modeling, the concrete slab on the upstream was represented through a six-noded element, while the interface characteristic between the dam body and the concrete slab was modeled using an interface element. The maximum settlement and stresses of the cross-section were found and their distribution was discussed and tabulated in the form of contours. The effect of reservoir filling loading had a gradual effect on the dam response behaviour. Comparisons with no water impoundment in the dam were also discussed.
    Matched MeSH terms: Models, Theoretical
  6. Abdul-Rashid, H.A., Al-Qdah, M.T., Chuah, H.T., Tayahi, M.
    ASM Science Journal, 2008;2(2):129-132.
    MyJurnal
    The operating principle and the performance of chromatic dispersion (CD) measurement technique are discussed through developed numerical models. The performance of the CD measurement technique was studied in terms of the measurement range and sensitivity as the wavelength separation was varied. Based on the numerical model, the technique sensitivity increased with wavelength separation. However, this increase in sensitivity was traded off with a narrower measurement range. The measurement technique was optimized at 5.0 GHz wavelength separation with a sensitivity of 0.009 (dB/ps/nm) and measurement range of 2500 ps/nm.
    Matched MeSH terms: Models, Theoretical
  7. Bong, C.H.J., Mah, D.Y.S, Putuhena, F.J., Said, S., Bustami, R.A.
    ASM Science Journal, 2012;6(1):47-60.
    MyJurnal
    Hydraulics simulation can be used as a supporting tool for planning and developing a framework, such as Integrated Flood Management for river management. To demonstrate this, a hydraulics model for the Sarawak River Basin was run using InfoWorks RS software by Wallingford Software, UK. InfoWorks River Simulation (RS) was chosen because its applicability has been proven and widely used to model Malaysian rivers. The extraction of computed floodwater level and flood maps for different time intervals would produce the rate of floodplain submergence from river bank level. This information could be incorporated into a logical framework to support decisions on flood management measures. Thus, hydraulics models can be used as tools to provide the necessary decision parameters for developing logical frameworks which would act as to guide the planning when it involved various stakeholders’ participation.
    Matched MeSH terms: Models, Theoretical
  8. Abdul-Kadir, M.A., Ariffin, J.
    ASM Science Journal, 2012;6(2):128-137.
    MyJurnal
    This paper reviews the advances made on studies related to bank erosion. Bank erosion has been an area of interest by researchers in geological, geotechnical, hydraulic, hydrology and river engineering disciplines. With anticipated global challenges from climate change impacts, bank erosion studies could support challenges faced in ensuring sustainable environmental management. The evolution in the theoretical and laboratory findings have led to the advances in bank erosion and contributed to new knowledge in the said field. This review summarises the findings of previous investigators including measurements approach and prediction of rates of bank erosion through the use of physical models and numerical approach.
    Matched MeSH terms: Models, Theoretical
  9. Rashid, A.S., Khatun, S., Ali, B.M., Khazani, A.M.
    ASM Science Journal, 2008;2(1):13-22.
    MyJurnal
    An analysis of the power spectral density of ultra-wideband (UWB) signals is presented in order to evaluate the effects of cumulative interference from multiple UWB devices on victim narrowband systems in their overlay bands like WiFi (i.e. IEEE802.11a) and 3rdG systems (Universal mobile telecommunications system/wideband code division multiple access). In this paper, the performances are studied through the bit-error-rate as a function of signal-to-noise ratio as well as signal-to-interference power ratio using computer simulation and exploiting the realistic channel model (i.e. modified Saleh-Valenzuela model). Several modifications of a generic Gaussian pulse waveform with lengths in the order of nanoseconds were used to generate UWB spectra. Different kinds of pulse modulation (i.e. antipodal and orthogonal) schemes were also taken into account.
    Matched MeSH terms: Models, Theoretical
  10. Ibrahim, R.W., Darus, M.
    ASM Science Journal, 2008;2(1):93-100.
    MyJurnal
    We have considered a fractional integral operator in this study. By using this integral operator we obtained a Briot-Bouquet superordination and sandwich theorem.
    Matched MeSH terms: Models, Theoretical
  11. Sharif, J.M., Latiff, M.S.A., Ngadi, M.A.
    ASM Science Journal, 2007;1(2):109-128.
    MyJurnal
    Spatio-temporal datasets are a collection of datasets where data can vary in both space and time. Theoretically, such datasets can be considered as continuous and discrete. For example, specification of the function, F: Ed  T Rn, where Ed denotes d-dimensional Euclidean space, T = R* ∩ {} the domain of time and Rn an n-dimensional scalar field. Examples of such data sets include time-varying simulation results, film and videos, time-varying medical datasets, geometry models with motion or deformation, meteorological measurements, and many more. It is therefore highly desirable to use visualisation to summarize meaningful information in higher dimensional spatio-temporal datasets. Our aim is to conceive an efficient visual study to facilitate scientists in identifying temporal association among complex and chaotic atom movements in ion trajectories. An application that uses a streamline for spatial motion of ion trajectories and Colour Number Coding Scheme for temporal encoding of high degree of timeline events among mobile ions is proposed. With an anthology of the visual examples, it was revealed that this application would be beneficial for scientists to visually mine any 3D spatio-temporal dataset.
    Matched MeSH terms: Models, Theoretical
  12. Saifizul AA, Yamanaka H, Karim MR
    Accid Anal Prev, 2011 May;43(3):1068-73.
    PMID: 21376903 DOI: 10.1016/j.aap.2010.12.013
    Most highly motorized countries in the world have implemented different speed limits for light weight and heavy weight vehicles. The heavy vehicle speed limit is usually chosen to be lower than that of passenger cars due to the difficulty for the drivers to safely maneuver the heavy vehicle at high speed and greater impact during a crash. However, in many cases, the speed limit for heavy vehicle is set by only considering the vehicle size or category, mostly due to simplicity in enforcement. In this study, traffic and vehicular data for all vehicle types were collected using a weigh-in-motion system installed at Federal Route 54 in Malaysia. The first finding from the data showed that the weight variation for each vehicle category is considerable. Therefore, the effect of gross vehicle weight (GVW) and category of heavy vehicle on free flow speed and their interaction were analyzed using statistical techniques. Empirical analysis results showed that statistically for each type of heavy vehicle, there was a significant relationship between free flow speed of a heavy vehicle and GVW. Specifically, the results suggest that the mean and variance of free flow speed decrease with an increase GVW by the amount unrelated to size and shape for all GVW range. Then, based on the 85th percentile principle, the study proposed a new concept for setting the speed limit for heavy vehicle by incorporating GVW where a different speed limit is imposed to the heavy vehicle, not only based on vehicle classification, but also according to its GVW.
    Matched MeSH terms: Models, Theoretical
  13. Ayinla AY, Othman WAM, Rabiu M
    Acta Biotheor, 2021 Sep;69(3):225-255.
    PMID: 33877474 DOI: 10.1007/s10441-020-09406-8
    Tuberculosis has continued to retain its title as "the captain among these men of death". This is evident as it is the leading cause of death globally from a single infectious agent. TB as it is fondly called has become a major threat to the achievement of the sustainable development goals (SDG) and hence require inputs from different research disciplines. This work presents a mathematical model of tuberculosis. A compartmental model of seven classes was used in the model formulation comprising of the susceptible S, vaccinated V, exposed E, undiagnosed infectious I1, diagnosed infectious I2, treated T and recovered R. The stability analysis of the model was established as well as the condition for the model to undergo backward bifurcation. With the existence of backward bifurcation, keeping the basic reproduction number less than unity [Formula: see text] is no more sufficient to keep TB out of the community. Hence, it is shown by the analysis that vaccination program, diagnosis and treatment helps to control the TB dynamics. In furtherance to that, it is shown that preference should be given to diagnosis over treatment as diagnosis precedes treatment. It is as well shown that at lower vaccination rate (0-20%), TB would still be endemic in the population. As such, high vaccination rate is required to send TB out of the community.
    Matched MeSH terms: Models, Theoretical
  14. Peter OJ, Panigoro HS, Abidemi A, Ojo MM, Oguntolu FA
    Acta Biotheor, 2023 Mar 06;71(2):9.
    PMID: 36877326 DOI: 10.1007/s10441-023-09460-y
    This paper is concerned with the formulation and analysis of an epidemic model of COVID-19 governed by an eight-dimensional system of ordinary differential equations, by taking into account the first dose and the second dose of vaccinated individuals in the population. The developed model is analyzed and the threshold quantity known as the control reproduction number [Formula: see text] is obtained. We investigate the equilibrium stability of the system, and the COVID-free equilibrium is said to be locally asymptotically stable when the control reproduction number is less than unity, and unstable otherwise. Using the least-squares method, the model is calibrated based on the cumulative number of COVID-19 reported cases and available information about the mass vaccine administration in Malaysia between the 24th of February 2021 and February 2022. Following the model fitting and estimation of the parameter values, a global sensitivity analysis was performed by using the Partial Rank Correlation Coefficient (PRCC) to determine the most influential parameters on the threshold quantities. The result shows that the effective transmission rate [Formula: see text], the rate of first vaccine dose [Formula: see text], the second dose vaccination rate [Formula: see text] and the recovery rate due to the second dose of vaccination [Formula: see text] are the most influential of all the model parameters. We further investigate the impact of these parameters by performing a numerical simulation on the developed COVID-19 model. The result of the study shows that adhering to the preventive measures has a huge impact on reducing the spread of the disease in the population. Particularly, an increase in both the first and second dose vaccination rates reduces the number of infected individuals, thus reducing the disease burden in the population.
    Matched MeSH terms: Models, Theoretical
  15. Jernigan DH
    Addiction, 2000 Dec;95 Suppl 4:S465-75.
    PMID: 11218345
    Development sociology has used global commodity chains as one way of analyzing the dynamics of power and profit-taking in globalized production networks made up of multiple firms and occurring in multiple national settings. A substantial portion of the alcohol supply in developing countries is now produced through such production networks. Particularly in the beer and spirits trade, a small number of transnational firms control networks of local producers, importers, advertisers and distributors. These networks serve to embed transnational or transnationally backed brands in the local culture, using the tools of market research, product design and marketing to influence local drinking practices. Case materials from Malaysia's beer industry help to illustrate how the transnational firms dominate in those links of the commodity chain in which monopoly or oligopoly control is most likely to be found: the design/recipe and marketing/advertising nodes. Their control of the commodity chains and extraction of monopoly or oligopoly profits from them places substantial resources and influence over drinking settings and practices in foreign hands. The impact of this influence on state efficacy and autonomy in setting alcohol policy is an important subject for future research on the creation and implementation of effective alcohol policies in developing societies.
    Matched MeSH terms: Models, Theoretical*
  16. Morozova O, Crawford FW, Cohen T, Paltiel AD, Altice FL
    Addiction, 2020 03;115(3):437-450.
    PMID: 31478285 DOI: 10.1111/add.14797
    BACKGROUND AND AIMS: Although opioid agonist treatment (OAT) for opioid use disorder (OUD) is cost-effective in settings where the HIV epidemic is concentrated among people who inject drugs, OAT coverage in Ukraine remains far below internationally recommended targets. Scale-up is limited by both OAT availability and demand. This study aimed to evaluate the cost-effectiveness of a range of plausible OAT scale-up strategies in Ukraine incorporating the potential impact of treatment spillover and the real-world demand for addiction treatment.

    DESIGN, SETTING AND PARTICIPANTS: Ten-year horizon (2016-25) modeling study of opioid addiction epidemic and treatment that accommodated potential peer effects in opioid use initiation and supply-induced treatment demand in three Ukrainian cities: Kyiv, Mykolaiv and Lviv, comprising a simulated population of people at risk of and with OUD.

    MEASUREMENTS: Incremental cost per quality-adjusted life-year gained in the simulated population.

    FINDINGS: An estimated 12.2-, 2.4- and 13.4-fold OAT capacity increase over 2016 baseline capacity in Kyiv, Mykolaiv and Lviv, respectively, would be cost-effective at a willingness-to-pay of one per-capita gross domestic product (GDP) per quality-adjusted life-year gained. This result is robust to parametric and structural uncertainty. Even under the most ambitious capacity increase, OAT coverage (i.e. the proportion of people with OUD receiving OAT) over a 10-year modeling horizon would be 20, 11 and 17% in Kyiv, Mykolaiv and Lviv, respectively, owing to limited demand.

    CONCLUSIONS: It is estimated that a substantial increase in opioid agonist treatment (OAT) capacity in three Ukrainian cities would be cost-effective for a wide range of willingness-to-pay thresholds. Even a very ambitious capacity increase, however, is unlikely to reach internationally recommended coverage levels. Further increases in coverage may be limited by demand and would require addressing existing structural barriers to OAT access.

    Matched MeSH terms: Models, Theoretical
  17. Khan MB, Lee XY, Nisar H, Ng CA, Yeap KH, Malik AS
    Adv Exp Med Biol, 2015;823:227-48.
    PMID: 25381111 DOI: 10.1007/978-3-319-10984-8_13
    Activated sludge system is generally used in wastewater treatment plants for processing domestic influent. Conventionally the activated sludge wastewater treatment is monitored by measuring physico-chemical parameters like total suspended solids (TSSol), sludge volume index (SVI) and chemical oxygen demand (COD) etc. For the measurement, tests are conducted in the laboratory, which take many hours to give the final measurement. Digital image processing and analysis offers a better alternative not only to monitor and characterize the current state of activated sludge but also to predict the future state. The characterization by image processing and analysis is done by correlating the time evolution of parameters extracted by image analysis of floc and filaments with the physico-chemical parameters. This chapter briefly reviews the activated sludge wastewater treatment; and, procedures of image acquisition, preprocessing, segmentation and analysis in the specific context of activated sludge wastewater treatment. In the latter part additional procedures like z-stacking, image stitching are introduced for wastewater image preprocessing, which are not previously used in the context of activated sludge. Different preprocessing and segmentation techniques are proposed, along with the survey of imaging procedures reported in the literature. Finally the image analysis based morphological parameters and correlation of the parameters with regard to monitoring and prediction of activated sludge are discussed. Hence it is observed that image analysis can play a very useful role in the monitoring of activated sludge wastewater treatment plants.
    Matched MeSH terms: Models, Theoretical
  18. Foong HF, Hamid TA, Ibrahim R, Haron SA, Shahar S
    Aging Ment Health, 2018 Jan;22(1):109-120.
    PMID: 27732054 DOI: 10.1080/13607863.2016.1231172
    OBJECTIVES: The aim of this study was to identify the predictors of elderly's cognitive function based on biopsychosocial and cognitive reserve perspectives.

    METHOD: The study included 2322 community-dwelling elderly in Malaysia, randomly selected through a multi-stage proportional cluster random sampling from Peninsular Malaysia. The elderly were surveyed on socio-demographic information, biomarkers, psychosocial status, disability, and cognitive function. A biopsychosocial model of cognitive function was developed to test variables' predictive power on cognitive function. Statistical analyses were performed using SPSS (version 15.0) in conjunction with Analysis of Moment Structures Graphics (AMOS 7.0).

    RESULTS: The estimated theoretical model fitted the data well. Psychosocial stress and metabolic syndrome (MetS) negatively predicted cognitive function and psychosocial stress appeared as a main predictor. Socio-demographic characteristics, except gender, also had significant effects on cognitive function. However, disability failed to predict cognitive function.

    CONCLUSION: Several factors together may predict cognitive function in the Malaysian elderly population, and the variance accounted for it is large enough to be considered substantial. Key factor associated with the elderly's cognitive function seems to be psychosocial well-being. Thus, psychosocial well-being should be included in the elderly assessment, apart from medical conditions, both in clinical and community setting.

    Matched MeSH terms: Models, Theoretical*
  19. Azanza RV, Taylor FJ
    Ambio, 2001 Sep;30(6):356-64.
    PMID: 11757284
    Pyrodinium bahamense (var. compressum) has been the only dinoflagellate species that has caused major public health and economic problems in the Southeast Asian region for more than 2 decades now. It produces saxitoxin, a suite of toxins that cause Paralytic Shellfish Poisoning (PSP). A serious toxicological problem affecting many countries of the world, mild cases of this poisoning can occur within 30 minutes while in extreme cases, death through respiratory paralysis may occur within 2-24 hrs of ingestion of intoxicated shellfish. Blooms of the organism have been reported in Malaysia, Brunei Darussalam, the Philippines and Indonesia. The ASEAN-Canada Red Tide Network has recorded 31 blooms of the organism in 26 areas since 1976 when it first occurred in Sabah, Malaysia. As of 1999, the most hard hit country has been the Philippines which has the greatest number of areas affected (18) and highest number of Paralytic Shellfish Poisoning (PSP) cases (about 1995). Malaysia has reported a total of 609 PSP cases and 44 deaths while Brunei has recorded 14 PSP cases and no fatalities. Indonesia, on the other hand has a record of 427 PSP cases and 17 deaths. Studies on ecological/environmental impacts of these blooms have not been done in the region. Estimates of economic impacts have shown that the loss could be up to USD 300,000 day-1. Most of the data and information useful for understanding Pyrodinium bloom dynamics have come from harmful/toxic algal monitoring and research that have developed to different degrees in the various countries in the region affected by the organism's bloom. Regional collaborative research and monitoring efforts can help harmonize local data sets and ensure their quality and availability for comparative analysis and modeling. Temporal patterns of the blooms at local and regional scales and possible signals and trends in the occurrence/recurrence and spread of Pyrodinium blooms could be investigated. Existing descriptive and simple predictive models of Pyrodinium blooms can be improved and refined to help in the management of the wild harvest and aquaculture of shellfish in a region where the people are dependent on these resources for their daily food sustainance and livelihood.
    Matched MeSH terms: Models, Theoretical*
  20. Matsumura H, Hudson MJ
    Am. J. Phys. Anthropol., 2005 Jun;127(2):182-209.
    PMID: 15558609
    This article uses metric and nonmetric dental data to test the "two-layer" or immigration hypothesis whereby Southeast Asia was initially occupied by an "Australo-Melanesian" population that later underwent substantial genetic admixture with East Asian immigrants associated with the spread of agriculture from the Neolithic period onwards. We examined teeth from 4,002 individuals comprising 42 prehistoric and historic samples from East Asia, Southeast Asia, Australia, and Melanesia. For the odontometric analysis, dental size proportions were compared using factor analysis and Q-mode correlation coefficients, and overall tooth size was also compared between population samples. Nonmetric population affinities were estimated by Smith's distances, using the frequencies of 16 tooth traits. The results of both the metric and nonmetric analyses demonstrate close affinities between recent Australo-Melanesian samples and samples representing early Southeast Asia, such as the Early to Middle Holocene series from Vietnam, Malaysia, and Flores. In contrast, the dental characteristics of most modern Southeast Asians exhibit a mixture of traits associated with East Asians and Australo-Melanesians, suggesting that these populations were genetically influenced by immigrants from East Asia. East Asian metric and/or nonmetric traits are also found in some prehistoric samples from Southeast Asia such as Ban Kao (Thailand), implying that immigration probably began in the early Neolithic. Much clearer influence of East Asian immigration was found in Early Metal Age Vietnamese and Sulawesi samples. Although the results of this study are consistent with the immigration hypothesis, analysis of additional Neolithic samples is needed to determine the exact timing of population dispersals into Southeast Asia.
    Matched MeSH terms: Models, Theoretical*
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links