Displaying publications 1 - 20 of 187 in total

Abstract:
Sort:
  1. Zahib IR, Md Tahir P, Talib M, Mohamad R, Alias AH, Lee SH
    Carbohydr Polym, 2021 Jan 15;252:117224.
    PMID: 33183648 DOI: 10.1016/j.carbpol.2020.117224
    Carboxymethyl starch (CMS) was produced from sago starch via carboxymethylation. The CMS with different degree of substitution (DS) ranges from 0.4 to 0.8 were mixed with polyethylene glycol (PEG) of different molecular weight and distilled water and the hydrogel was cured by electron beam irradiation with doses ranging from 25 to 35 kGy. The results revealed that CMS-PEG hydrogels with DS 0.4 give the optimum gel content when radiated at 30 kGy and with PEG 600. Thermogravimetric analysis (TGA) revealed that there are two phases exist in CMS with DS 0.4 in contrast to the three steps decomposition occurs in DS 0.6 and 0.8. It shows that the CMS with DS 0.4 is more thermally stable. Surface morphology revealed crosslinking among the blends when subjected into the radiation dose. The study shows both radiation and PEG addition improved most of the properties of CMS irrespective of the DS value.
    Matched MeSH terms: Polyethylene Glycols
  2. Yusof Hamzah, Naurah Mat Isa, Wan Md Zin Wan Yunus
    MyJurnal
    Covalently cross-linked nanogels were prepared via irradiation of inverse micelles that had been preparedfrom radiation crosslinkable polymer, water, oil and surfactant. A mixture of polymer, water, heptane andsodium dioctyl sulfosuccinate (AOT) at certain compositions forms inverse micelles with the size rangingfrom 2 to 8 nm. The hydrophilic head of the surfactant facilitates encapsulation of water soluble polymer.If the entrapped polymer is radiation crosslinkable, it is expected that upon irradiation, polymerizationshall take place in such small and confined space, leading to formation of nano-sized polymeric gel.Meanwhile, emulsion at 2 nm size was chosen for gamma irradiation process. The formation of thenano-sized discreet gel using irradiation of inverse micelles technique was proven at a dose as low as 5kGy to obtain nanogel sized ~ 95 nm.
    Matched MeSH terms: Polyethylene Glycols
  3. Young G, Collins PW, Colberg T, Chuansumrit A, Hanabusa H, Lentz SR, et al.
    Thromb Res, 2016 May;141:69-76.
    PMID: 26970716 DOI: 10.1016/j.thromres.2016.02.030
    INTRODUCTION: Paradigm™4 was an international extension trial investigating the safety and efficacy of nonacog beta pegol, a recombinant glycoPEGylated factor IX (FIX) with extended half-life, in haemophilia B patients (FIX activity ≤2%; aged 13-70years) who had previously participated in phase III pivotal (paradigm™2) or surgery (paradigm™3) trials.

    METHODS: Patients chose to continue treatment with nonacog beta pegol in either one of two once-weekly prophylaxis arms (10IU/kg or 40IU/kg), or an on-demand arm (40IU/kg for mild/moderate bleeds; 80IU/kg for severe bleeds). The primary objective was to evaluate immunogenicity; key secondary objectives included assessing safety and haemostatic efficacy in the treatment and prevention of bleeds.

    RESULTS: Seventy-one patients received prophylaxis or on-demand treatment. No patient developed an inhibitor and no safety concerns were identified. The success rate for the treatment of reported bleeds was 94.6%; most (87.9%) resolved with one injection. The median annualised bleeding rate for patients on prophylaxis was 1.36 (interquartile range [IQR] 0.00-2.23) and 1.00 (IQR 0.00-2.03) for the 10 and 40IU/kg treatment arms, respectively. The mean FIX activity trough achieved for 10 and 40IU once weekly was 9.8% and 21.3%, respectively. Fourteen patients on prophylaxis underwent 23 minor surgical procedures; haemostatic perioperative outcomes for all of those evaluated were 'excellent' or 'good'.

    CONCLUSIONS: Nonacog beta pegol showed a favourable tolerability profile (with no safety issues identified) with good prophylactic protection and control of bleeding in previously treated adult and adolescent haemophilia B patients.

    Matched MeSH terms: Polyethylene Glycols/administration & dosage; Polyethylene Glycols/adverse effects; Polyethylene Glycols/therapeutic use*
  4. Yew CW, Kumar SV
    Mol Biol Rep, 2012 Feb;39(2):1783-90.
    PMID: 21625851 DOI: 10.1007/s11033-011-0919-7
    MicroRNAs (miRNAs) are small RNAs (sRNAs) with approximately 21-24 nucleotides in length. They regulate the expression of target genes through the mechanism of RNA silencing. Conventional isolation and cloning of miRNAs methods are usually technical demanding and inefficient. These limitations include the requirement for high amounts of starting total RNA, inefficient ligation of linkers, high amount of PCR artifacts and bias in the formation of short miRNA-concatamers. Here we describe in detail a method that uses 80 μg of total RNA as the starting material. Enhancement of the ligation of sRNAs and linkers with the use of polyethylene glycol (PEG8000) was described. PCR artifacts from the amplification of reverse-transcribed sRNAs were greatly decreased by using lower concentrations of primers and reducing the number of amplification cycles. Large concatamers with up to 1 kb in size with around 20 sRNAs/concatamer were obtained by using an optimized reaction condition. This protocol provide researchers with a rapid, efficient and cost-effective method for the construction of miRNA profiles from plant tissues containing low amounts of total RNA, such as fruit flesh and senescent leaves.
    Matched MeSH terms: Polyethylene Glycols
  5. Yeh CC, Muduli S, Peng IC, Lu YT, Ling QD, Alarfaj AA, et al.
    Data Brief, 2016 Mar;6:603-8.
    PMID: 26909373 DOI: 10.1016/j.dib.2015.12.056
    This data article contains two figures and one table supporting the research article entitled: "Continuous harvest of stem cells via partial detachment from thermoresponsive nanobrush surface" [1]. The table shows coating conditions of three copolymers, poly(styrene-co-acrylic acid) grafted with oligovitronectin, poly(styrene-co-N-isopropylacrylamide) and poly(styrene-co-polyethylene glycol methacrylate) to prepare thermoresponsive surface. XPS spectra show the nitrogen peak of the polystyrene surface coated with poly(styrene-co-acrylic acid) grafted with oligovitronectin. The surface coating density analyzed from sorption of poly(styrene-co-acrylic acid) grafted with oligovitronectin by UV-vis spectroscopy is also presented.
    Matched MeSH terms: Polyethylene Glycols
  6. Yeak J, Iqbal T, Zahari M, Ismail F
    Int J STD AIDS, 2019 07;30(8):802-809.
    PMID: 31046617 DOI: 10.1177/0956462418825353
    Matched MeSH terms: Polyethylene Glycols/therapeutic use
  7. Yasin SM, Ibrahim S, Johan MR
    ScientificWorldJournal, 2014;2014:547076.
    PMID: 25133244 DOI: 10.1155/2014/547076
    New solid polymer electrolytes (SPE) based on poly(ethylene oxide) (PEO) doped with lithium trifluoromethanesulfonate (LiCF3SO3), dibutyl phthalate (DBP) plasticizer, and zirconium oxide (ZrO2) nanoparticles were prepared by solution-casting technique. The conductivity was enhanced by addition of dibutyl phthalate (DBP) plasticizer and ZrO2 nanofiller with maximum conductivity (1.38 × 10(-4) Scm(-1)). The absorption edge and band gap values showed decreases upon addition of LiSO3CF3, DBP, and ZrO2 due to the formation of localized states in the SPE and the degree of disorder in the films increased.
    Matched MeSH terms: Polyethylene Glycols/chemistry*
  8. Yahya, N.A., Lui, J.L., Chong, K.W.A., Abu Kasim, N.H., Radzi, Z., Lim, C.M.
    Ann Dent, 2008;15(1):11-19.
    MyJurnal
    The objective of this study was to investigate the effect of various luting cement systems on bond strength of fibre-reinforced posts to root canal dentine. 40 extracted single rooted sound premolar teeth were root filled, decoronated and randomly divided into four groups. Fibre posts, Aestheti- Plus™ (Bisco,Inc. Schaumburg, IL, USA) were cemented using four luting cements: Group A (control): Elite 100® Zinc phosphate (GC Corp, Japan), Group B: Calibra ™ Esthetic Resin Cement (Dentsply Caulk, USA), Group C: RelyX ARC Adhesive Resin (3M ESPE), Group D: RelyX Unicem Aplicap (3M ESPE). Each root was sliced into 2 discs representing the coronal and middle portions of the root canal giving rise to 20 specimens per group. Bond strength was determined using push-out tests and data was analyzed using SPSS version 14.0. The mean bond strength of Group A to Aestheti-Plus™ post was 7.71 MPa (±2.51) and Group B was 5.69 MPa (±3.23). Group C exhibited the lowest mean bond strength, 4.29 MPa (±3.53) while the highest bond strength was obtained from Group D, 7.98 MPa (±2.61). One way ANOVA showed significant interaction between all groups (p=.OOI). Post-hoc Bonferroni test reve;iled that bond strength of Group C was significantly lower compared to Group A (p=.008) and D (p=.004). In conclusion, the mean bond strength of Aestheti- Plus™ post to root canal dentine was highest when cemented with RelyX Unicem resin cement followed by Elite 100® zinc phosphate cement, Calibra and RelyX ARC resin cements. However, the bond strengths of Cali bra and RelyX Unicem resin cements were not significantly different from Elite 100® zinc phosphate cement.
    Matched MeSH terms: Polyethylene Glycols
  9. Wong TW, Deepak KG, Taib MN, Anuar NK
    Int J Pharm, 2007 Oct 1;343(1-2):122-30.
    PMID: 17597317
    The capacity of microwave non-destructive testing (NDT) technique to characterize the matrix property of binary polymeric films for use as transdermal drug delivery system was investigated. Hydroxypropylmethylcellulose (HPMC) and polyethylene glycol (PEG) 3000 were the choice of polymeric matrix and plasticizer, respectively with loratadine as the model drug. Both blank and drug loaded HPMC-PEG 3000 films were prepared using the solvent-evaporation method. These films were conditioned at the relative humidity of 25, 50 and 75% prior to physicochemical characterization using the established methods of ultra-violet spectrophotometry, differential scanning calorimetry and Fourier transform infrared spectroscopy methods, as well as, novel microwave NDT technique. Blank films exhibited a greater propensity of polymer-polymer interaction at the O-H domain upon storage at a lower level of relative humidity, whereas drug loaded films exhibited a greater propensity of polymer-polymer, polymer-plasticizer and/or drug-polymer interaction via the O-H, C-H and/or aromatic C=C functional groups when they were stored at a lower or moderate level of relative humidity. The absorption and transmission characteristics of both blank and drug loaded films for microwave varied with the state of polymer-polymer, polymer-plasticizer, and/or drug-polymer interaction of the matrix. The measurements of microwave NDT test at 8 and 12 GHz were sensitive to the polar fraction of film involving functional group such as O-H moiety and the less polar environment of matrix consisting of functional groups such as C-H and aromatic C=C moieties. The state of interaction between polymer, plasticizer and/or drug of a binary polymeric film can be elucidated through its absorption and transmission profiles of microwave.
    Matched MeSH terms: Polyethylene Glycols/chemistry*
  10. Wong TW, Musa N
    Int J Pharm, 2012 Jul 1;430(1-2):184-96.
    PMID: 22531845 DOI: 10.1016/j.ijpharm.2012.04.026
    Conventional melt pelletization and granulation processes produce round and dense, and irregularly shaped but porous agglomerates respectively. This study aimed to design centrifugal air-assisted melt agglomeration technology for manufacture of spherical and yet porous "granulets" for ease of downstream manufacturing and enhancing drug release. A bladeless agglomerator, which utilized shear-free air stream to mass the powder mixture of lactose filler, polyethylene glycol binder and poorly water-soluble tolbutamide drug into "granulets", was developed. The inclination angle and number of vane, air-impermeable surface area of air guide, processing temperature, binder content and molecular weight were investigated with reference to "granulet" size, shape, texture and drug release properties. Unlike fluid-bed melt agglomeration with vertical processing air flow, the air stream in the present technology moved centrifugally to roll the processing mass into spherical but porous "granulets" with a drug release propensity higher than physical powder mixture, unprocessed drug and dense pellets prepared using high shear mixer. The fast-release attribute of "granulets" was ascribed to porous matrix formed with a high level of polyethylene glycol as solubilizer. The agglomeration and drug release outcomes of centrifugal air-assisted technology are unmet by the existing high shear and fluid-bed melt agglomeration techniques.
    Matched MeSH terms: Polyethylene Glycols/chemistry
  11. Wee AS, Lim CK, Tan SL, Ahmad TS, Kamarul T
    Tissue Eng Part C Methods, 2022 10;28(10):501-510.
    PMID: 36082992 DOI: 10.1089/ten.TEC.2022.0112
    Transforming growth factor-beta 1 (TGF-β1) has been reported to promote chondrogenic differentiation and proliferation in the multipotent stromal cell (MSCs), and the transforming growth factor-beta 3 (TGF-β3) tends to be exclusively in promoting cell differentiation alone. The objective of this study was to determine the effect of TGF-β1 and -β3 on the MSCs chondrogenic differentiation on the poly (vinyl alcohol)-chitosan-poly (ethylene glycol) (PVA-NOCC-PEG) scaffold, compared with that of monolayer and pellet cultures. In this study, P2 rabbit bone marrow-derived MSCs were seeded either on the untreated six-well plate (for monolayer culture) or onto the PVA-NOCC-PEG scaffold or cultured as a pellet culture. The cultures were maintained in a chemically defined serum-free medium supplemented with 10 ng/mL of either TGF-β1 or TGF-β3. Cell viability assay, biochemical assay, and real-time polymerase chain reaction were performed to determine the net effect of cell proliferation and chondrogenic differentiation of each of the growth factors. The results showed that the PVA-NOCC-PEG scaffold enhanced MSCs cell proliferation from day 12 to 30 (p  0.05). In terms of chondrogenic differentiation, the PVA-NOCC-PEG scaffold augmented the GAGs secretion in MSCs and the mRNA expression levels of Sox9, Col2a1, Acan, and Comp were elevated (p  0.05). In conclusion, TGF-β1 and TGF-β3 enhanced the chondrogenic differentiation of MSCs seeded on the PVA-NOCC-PEG scaffold; however, there was no significant difference between the effect of TGF-β1 and TGF-β3. Impact statement Transforming growth factor-beta (TGF-β) superfamily members is a key requirement for the in vitro chondrogenic differentiation of mesenchymal stem cells (MSCs). In this study, the effects of TGF-β1 and -β3 on MSC chondrogenic differentiation and proliferation on a novel three-dimensional scaffold, the poly(vinyl alcohol)-chitosan-poly(ethylene glycol) (PVA-NOCC-PEG) scaffold, was evaluated. In this study, the results showed both TGF-β1 and TGF-β3 can enhance the chondrogenic differentiation of MSCs seeded on the PVA-NOCC-PEG scaffold.
    Matched MeSH terms: Polyethylene Glycols/pharmacology
  12. Vijayan V, Shalini K, Yugesvaran V, Yee TH, Balakrishnan S, Palanimuthu VR
    Curr Pharm Des, 2018;24(28):3366-3375.
    PMID: 30179118 DOI: 10.2174/1381612824666180903110301
    BACKGROUND: Triple-Negative Breast Cancer is an aggressive type of breast cancer, which is not treatable by chemotherapy drugs, due to the lack of Estrogen Receptor (ER), Progesterone Receptor (PR) expression and Human Epidermal Growth Factor Receptor 2 (HER2) on the cell surface.

    OBJECTIVE: The aim of this study was to compare the effect of paclitaxel loaded PLGA nanoparticle (PTX-NPs) on the cytotoxicity and apoptosis of the different MDA-MB type of cell lines.

    METHOD: PTX-NPs were prepared by nanoprecipitation method and characterized earlier. The cytotoxicity of PTX-NPs was evaluated by MTT and LDH assay, later apoptosis was calculated by flow cytometry analysis.

    RESULTS: The prepared NP size of 317.5 nm and zetapontial of -12.7 mV showed drug release of 89.1 % at 48 h. MDA-MB-231 type cell showed significant cytotoxicity by MTT method of 47.4 ± 1.2 % at 24 h, 34.6 ± 0.8 % at 48 h and 23.5 ± 0.5 % at 72 h and LDH method of 35.9 ± 1.5 % at 24 h, 25.4 ± 0.6 % at 48 h and 19.8 ± 2.2 % at 72 h with apoptosis of 47.3 ± 0.4 %.

    CONCLUSION: We have found that PTX-NPs showed the cytotoxic effect on all the MDA-MB cancer cell lines and showed potent anticancer activities against MDA-MB-231 cell line via induction of apoptosis.

    Matched MeSH terms: Polyethylene Glycols/chemistry*
  13. Tiede A, Abdul-Karim F, Carcao M, Persson P, Clausen WHO, Kearney S, et al.
    Haemophilia, 2017 Jul;23(4):547-555.
    PMID: 28233381 DOI: 10.1111/hae.13191
    INTRODUCTION: Nonacog beta pegol (N9-GP) is a glycoPEGylated recombinant factor IX (FIX) with an extended half-life developed for routine prophylaxis and the prevention and treatment of bleeding episodes in patients with haemophilia B.

    AIM: The aim of this study was to evaluate the pharmacokinetics (PK) of N9-GP.

    METHODS: Data from 41 previously treated haemophilia B patients, enrolled globally (16 adolescents/adults and 25 children; FIX activity ≤0.02 IU mL-1) with no history of FIX inhibitors, were included. N9-GP was administered once-weekly as 10 IU kg-1or 40 IU kg-1in adolescents/adults and 40 IU kg-1in children. Blood was sampled up to 168 h (1 week) post dose. Standard PK was estimated on the basis of plasma FIX activity vs. time (PK profiles) using non-compartmental methods. Furthermore, a population PK analysis and FIX activity predictions were performed.

    RESULTS: Incremental recoveries were 0.02 (IU mL-1)/(IU kg-1) in both adolescents/adults and children. The extended half-life resulted in mean trough levels of 0.27 IU mL-1for adolescents/adults and 0.17 IU mL-1for children at steady-state after weekly dosing at 40 IU kg-1. The population PK analysis confirmed a mono-exponential decay in FIX activity and allowed for predictions of FIX activity for adolescents/adults above 0.15 IU mL-1at all times and 6.4 days week-1in children.

    CONCLUSION: N9-GP has the potential to shift previously treated haemophilia B patients from a severe/moderate disease state into a mild- or non-haemophilic range for most of the dosing interval, which is expected to reduce the number of bleeding episodes.

    Matched MeSH terms: Polyethylene Glycols/pharmacokinetics*; Polyethylene Glycols/therapeutic use
  14. Thayale Purayil F, Rajashekar B, S Kurup S, Cheruth AJ, Subramaniam S, Hassan Tawfik N, et al.
    Genes (Basel), 2020 06 10;11(6).
    PMID: 32531994 DOI: 10.3390/genes11060640
    Haloxylon persicum is an endangered western Asiatic desert plant species, which survives under extreme environmental conditions. In this study, we focused on transcriptome analysis of H. persicum to understand the molecular mechanisms associated with drought tolerance. Two different periods of polyethylene glycol (PEG)-induced drought stress (48 h and 72 h) were imposed on H. persicum under in vitro conditions, which resulted in 18 million reads, subsequently assembled by de novo method with more than 8000 transcripts in each treatment. The N50 values were 1437, 1467, and 1524 for the control sample, 48 h samples, and 72 h samples, respectively. The gene ontology (GO) and Kyoto encyclopedia of genes and genomes (KEGG) pathway analysis resulted in enrichment of mitogen-activated protein kinase (MAPK) and plant hormone signal transduction pathways under PEG-induced drought conditions. The differential gene expression analysis (DGEs) revealed significant changes in the expression pattern between the control and the treated samples. The KEGG analysis resulted in mapping transcripts with 138 different pathways reported in plants. The differential expression of drought-responsive transcription factors depicts the possible signaling cascades involved in drought tolerance. The present study provides greater insight into the fundamental transcriptome reprogramming of desert plants under drought.
    Matched MeSH terms: Polyethylene Glycols/toxicity
  15. Teo YY, Misran M, Low KH
    J Liposome Res, 2014 Sep;24(3):241-8.
    PMID: 24597523 DOI: 10.3109/08982104.2014.891234
    A vesicle is a microscopic particle composed of a lipid bilayer membrane that separates the inner aqueous compartment from the outer aqueous environment. Palmitoleate-palmitoleic acid vesicles were prepared and their physico-chemical properties were investigated. Moreover, mixed vesicles composed of palmitoleic acid and PEGylated lipid and/or a mixture of phospholipids were also prepared. The stabilizing effects of these double-chain lipids on the formation of palmitoleate-palmitoleic acid vesicles were studied. Stability of the vesicle suspension was examined using particle size and zeta potential at 30 °C. The magnitude of the zeta potential was relatively lower in the vesicle suspension with the presence of phospholipid. Although some of the mixed vesicles that were formed were not very stable, they displayed potential for encapsulating the active ingredient calcein and the encapsulation efficiencies of calcein were encouraging. The palmitoleate-palmitoleic acid-DPPE-PEG2000 vesicle showed the most promising stability and encapsulation efficiency.
    Matched MeSH terms: Polyethylene Glycols/chemistry*
  16. Tan, Hui San, Abdoreza Soleimani Farjam, Goh, Yong Meng, Idrus Zulkifli, Evi Croes, Sarathi Karmakar Partha, et al.
    MyJurnal
    This research was done to evaluate the effect of a commercial exogenous emulsifier
    (polyethylene glycol ricinoleate (PEGR)) with high hydrophilic-to-lipophilic balance (HLB)
    supplementation to broiler chicken diets on growth performance, digestibility of fat and
    apparent metabolisable energy (AME) content in week 1, 3 and 5. A total of 360 one-day-old
    male Cobb broiler chicks were assigned in groups of 30 to 12 battery cages. The chicks were
    randomly assigned to two dietary treatments, with 6 replicate cages per treatment. The diets
    were either standard broiler starter and finisher, with rice bran oil (RBO) as supplemented fat
    source or similar diets + 0.05% emulsifier (RBOV). Feed intakes of RBOV groups significantly
    increased compared to those of RBO groups from week 2 till 4 while body weights of RBOV
    diets significantly increased in week 4 and 5. Both RBOV and RBO groups had similar FCR
    except for week 5. Addition of this strongly hydrophilic emulsifier showed no significant
    difference in fat digestibility of both RC and RV groups but higher AME was noted for the
    treatment than for the control groups at week 5. Therefore, supplementing the exogenous
    emulsifier into a broiler diet enriched with rice bran oil improved body weight and AME
    content at week 5 with minimal effect on fat digestibility.
    Matched MeSH terms: Polyethylene Glycols
  17. Tan YT, Heng PW, Wan LS
    Pharm Dev Technol, 1999;4(4):561-70.
    PMID: 10578511
    Modified-release drug spheroids coated with an aqueous mixture of high-viscosity hydroxypropylmethylcellulose (HPMC) and sodium carboxymethylcellulose (NaCMC) were formulated. The preparation of core drug spheroids and the coating procedures were performed using the rotary processor and a bottom-spray fluidized bed, respectively. Dissolution studies indicated that incorporation of suitable additives, such as poly(vinylpyrrolidone) (PVP) and poly(ethylene glycol) 400 (PEG) improved the flexibility and integrity of the coat layer by retarding the drug release. An increase in coating levels applied generally retarded the release rate of the drug. However, the ratio of HPMC to NaCMC in the mixed, plasticized polymeric coat played a more dominant role in determining the dissolution T50% values. The optimal ratio of HPMC to NaCMC for prolonged drug release was found to be 3:1, whereas an increase in the amount of NaCMC in the mixed polymer coat only increased drug release. The synergistic viscosity effect of HPMC and NaCMC in retarding drug release rate was greater in distilled water than in dissolution media of pH 1 and 7.2. Cross-sectional view of the scanning electron micrograph showed that all of the coated spheroids exhibited a well-fused, continuous, and distinct layer of coating film. The drug release kinetics followed a biexponential first-order kinetic model.
    Matched MeSH terms: Polyethylene Glycols
  18. Tan YT, Peh KK, Al-Hanbali O
    AAPS PharmSciTech, 2000;1(3):E24.
    PMID: 14727910
    This study examined the mechanical (hardness, compressibility, adhesiveness, and cohesiveness) and rheological (zero-rate viscosity and thixotropy) properties of polyethylene glycol (PEG) gels that contain different ratios of Carbopol 934P (CP) and polyvinylpyrrolidone K90 (PVP). Mechanical properties were examined using a texture analyzer (TA-XT2), and rheological properties were examined using a rheometer (Rheomat 115A). In addition, lidocaine release from gels was evaluated using a release apparatus simulating the buccal condition. The results indicated that an increase in CP concentration significantly increased gel compressibility, hardness, and adhesiveness, factors that affect ease of gel removal from container, ease of gel application onto mucosal membrane, and gel bioadhesion. However, CP concentration was negatively correlated with gel cohesiveness, a factor representing structural reformation. In contrast, PVP concentration was negatively correlated with gel hardness and compressibility, but positively correlated with gel cohesiveness. All PEG gels exhibited pseudoplastic flow with thixotropy, indicating a general loss of consistency with increased shearing stress. Drug release T50% was affected by the flow rate of the simulated saliva solution. A reduction in the flow rate caused a slower drug release and hence a higher T50% value. In addition, drug release was significantly reduced as the concentrations of CP and PVP increased because of the increase in zero-rate viscosity of the gels. Response surfaces and contour plots of the dependent variables further substantiated that various combinations of CP and PVP in the PEG gels offered a wide range of mechanical, rheological, and drug-release characteristics. A combination of CP and PVP with complementary physical properties resulted in a prolonged buccal drug delivery.
    Matched MeSH terms: Polyethylene Glycols/chemistry*
  19. Tan SS, Abu Hassan MR, Abdullah A, Ooi BP, Korompis T, Merican MI
    J Viral Hepat, 2010 Jun;17(6):410-8.
    PMID: 19758272 DOI: 10.1111/j.1365-2893.2009.01191.x
    Chronic hepatitis C is associated with increased morbidity and mortality in persons undergoing haemodialysis. This single-arm, open-label clinical trial investigated the safety and efficacy of an escalating dosage regimen of pegylated interferon (PEG-IFN) alpha-2b in this patient population. Patients with chronic hepatitis C who were undergoing haemodialysis began treatment with PEG-IFN alpha-2b at a dose of 0.5 microg/kg/week, which was increased every 4 weeks to a maximum of 1 microg/kg/week. Treatment duration was 24 weeks for patients with genotype (G) 2 or 3 infection and 48 weeks for patients with G1 infection. The primary end point was sustained virological response (SVR). Of 46 patients screened, 34 (G1: 70.6%; G3: 29.4%) were treated and 23 (67.6%) completed treatment. Overall, 85.3% of patients experienced early virological response, 52.9% experienced end-of-treatment response, and 50% attained SVR, with a trend toward higher SVR rates in G3 compared with G1 patients (80%vs 37.5%; P = 0.06). Anaemia was the main reason for discontinuation of treatment. Patients with chronic hepatitis C who are undergoing haemodialysis can be successfully treated with an escalating dosage regimen of PEG-IFN alpha-2b monotherapy. G3-infected patients can attain high rates of SVR with only 24 weeks of therapy.
    Matched MeSH terms: Polyethylene Glycols/administration & dosage*; Polyethylene Glycols/adverse effects*
  20. Tan SS, Adlin Nadia Z
    Med J Malaysia, 2017 06;72(3):165-174.
    PMID: 28733564 MyJurnal
    AIM: To describe the clinical characteristic of hepatitis C (HCV) patients and the results of pegylated interferon and ribavirin (PegIFN/RBV) therapy in a routine clinical practice.

    METHODS: A retrospective review of consecutive HCV patients treated with PegIFN/RBV in 2004 to 2012.

    RESULTS: A total of 273 patients received treatment. The mean age was 44.16 ± 10.5 years and 76% were male. The top 2 self-reported risks were blood or blood product transfusion before 1994 and injection drug use, found in 57.1% of patients. The predominant HCV genotype (GT) was 3 at 60.6%, second was GT1 at 36.1% and other GTs were uncommon at about 1% or less. About half of our patients have high baseline viral load (>800,000 iu/ml), 18.3% had liver cirrhosis and 22.3% had HIV co-infection. Co-morbid illness was found in 42.9%, hypertension and type 2 diabetes were the two most common. The overall sustained virological response (SVR) by intention-to-treat analysis were 54.9% (n=150/273), 41.2% (40/97) for GT1, 100% (5/5) for GT2 and 62% (101/163) for GT3. Subgroup analysis for HCV monoinfected, treatment naïve showed SVR of 49.2% (31/63) for GT1, 100% (5/5) for GT2 and 67% (69/103) for GT3. In HCV mono-infected and treatment experienced (n=29), the SVR was 28.6% (4/14) for GT1, 21.4% (69/103) for GT3. In the HIV/HCV co-infected, treatment naïve (n=56), the SVR was 28.6% (4/14) for GT1 and 64.3% (27/42) for GT3. Treatment naïve GT3 mono-infected patients had a statistically significant higher SVR compared to treatment experienced patients (P=0.001). In GT3 patients who achieved rapid virological response, the SVR was significantly higher at 85.2% (P< 0.001). The SVR for cirrhotics were low especially for GT1 at 21% (4/19) and 31% (4/13) based on all patients and treatment naïve HCV monoinfected respectively. In GT3 cirrhotics the corresponding SVR were 57.1% (16/28) and 60.9% (14/23). Premature discontinuation rate was 21.2% with the majority due to intolerable adverse events at 12.1%.

    CONCLUSIONS: In our routine clinical practice, the HCV patients we treated were young, predominantly of GT3 and many had difficult-to-treat clinical characteristics. The SVR of our patients were below those reported in Asian clinical trials but in keeping with some "real world" data.

    Matched MeSH terms: Polyethylene Glycols/administration & dosage; Polyethylene Glycols/therapeutic use*
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links