Displaying publications 1 - 20 of 855 in total

Abstract:
Sort:
  1. Starlin Chellathurai M, Mahmood S, Mohamed Sofian Z, Wan Hee C, Sundarapandian R, Ahamed HN, et al.
    Drug Deliv, 2024 Dec;31(1):2296350.
    PMID: 38147499 DOI: 10.1080/10717544.2023.2296350
    Microneedle (MN) delivery devices are more accepted by people than regular traditional needle injections (e.g. vaccination) due to their simplicity and adaptability. Thus, patients of chronic diseases like diabetes look for alternative pain-free treatment regimens circumventing regular subcutaneous injections. Insulin microneedles (INS-MNs) are a thoughtfully researched topic (1) to overcome needle phobia in patients, (2) for controlled delivery of the peptide, (3) decreasing the frequency of drug administration, (4) to ease the drug administration procedure, and (5) thus increasing patient adherence to the treatment dosage regimes. MNs physically disrupt the hard outer skin layer to create minuscule pores for insulin (INS) to pass through the dermal capillaries into the systemic circulation. Biodegradable polymeric MNs are of greater significance for INS and vaccine delivery than silicon, metal, glass, or non-biodegradable polymeric MNs due to their ease of fabrication, mass production, cost-effectiveness, and bioerodability. In recent years, INS-MNs have been researched to deliver INS through the transdermal implants, buccal mucosa, stomach wall, intestinal mucosal layers, and colonic mucosa apart from the usual transdermal delivery. This review focuses on the design characteristics and the applications of biodegradable/dissolvable polymeric INS-MNs in transdermal, intra-oral, gastrointestinal (GI), and implantable delivery. The prospective approaches to formulate safe, controlled-release INS-MNs were highlighted. Biodegradable/dissolvable polymers, their significance, their impact on MN morphology, and INS release characteristics were outlined. The developments in biodegradable polymeric INS-MN technology were briefly discussed. Bio-erodible polymer selection, MN fabrication and evaluation factors, and other design aspects were elaborated.
    Matched MeSH terms: Polymers
  2. Tablit S, Krache R, Amroune S, Jawaid M, Hachaichi A, Ismail AS, et al.
    J Mech Behav Biomed Mater, 2024 Apr;152:106438.
    PMID: 38359736 DOI: 10.1016/j.jmbbm.2024.106438
    Arundo donax L. is investigated in this study as a suitable reinforcing agent for PLA/PP waste blend 3D printing filament. To improve the compatibility of the fibre and polymer, the Arundo fibre was chemically modified using alkali and silane treatment. Untreated and treated fibres were extruded with Polymer blends before being 3D printed. Effect of chemical treatment on thermal, mechanical, and morphological properties of the composites was investigated. The tensile, Izod impact, and water absorption of the 3D printed specimens were also tested. The Alkali treated (ALK) and combination of alkali and silane treatment (SLN) composites displayed good results. Tensile strength and modulus of the materials increased, as well as their maintained stability in the Izod impact test, demonstrating that the incorporation of ArF did not result in a loss in performance. SEM examination supported these findings by confirming the creation of beneficial interfacial contacts between the matrix and fibre components, as demonstrated by the lack of void between the matrix and the fibre surface. Furthermore, the alkali treatment of the ArF resulted in a considerable reduction in water absorption inside the biocomposite, with a 64% reduction seen in ALK composite comparison to the untreated composite (Un). After the 43-day assessment period.
    Matched MeSH terms: Polymers
  3. Rao K, Abdullah M, Ahmed U, Wehelie HI, Shah MR, Siddiqui R, et al.
    Arch Microbiol, 2024 Mar 04;206(4):134.
    PMID: 38433145 DOI: 10.1007/s00203-024-03854-3
    Acanthamoeba castellanii are opportunistic pathogens known to cause infection of the central nervous system termed: granulomatous amoebic encephalitis, that mostly effects immunocompromised individuals, and a sight threatening keratitis, known as Acanthamoeba keratitis, which mostly affects contact lens wearers. The current treatment available is problematic, and is toxic. Herein, an amphiphilic star polymer with AB2 miktoarms [A = hydrophobic poly(ℇ-Caprolacton) and B = hydrophilic poly (ethylene glycol)] was synthesized by ring opening polymerization and CuI catalyzed azide-alkyne cycloaddition. Characterization by 1H and 13C NMR spectroscopy, size-exclusion chromatography and fluorescence spectroscopy was accomplished. The hydrophobic drug itraconazole (ITZ) was incorporated in self-assembled micellar structure of AB2 miktoarms through co-solvent evaporation. The properties of ITZ loaded (ITZ-PCL-PEG2) and blank micelles (PCL-PEG2) were investigated through zeta sizer, scanning electron microscopy and Fourier-transform infrared spectroscopy. Itraconazole alone (ITZ), polymer (DPB-PCL), empty polymeric micelles (PCL-PEG2) alone, and itraconazole loaded in polymeric micelles (ITZ-PCL-PEG2) were tested for anti-amoebic potential against Acanthamoeba, and the cytotoxicity on human cells were determined. The polymer was able to self-assemble in aqueous conditions and exhibited low value for critical micelle concentration (CMC) 0.05-0.06 µg/mL. The maximum entrapment efficiency of ITZ was 68%. Of note, ITZ, DPB, PCL-PEG2 and ITZ-PCL-PEG2 inhibited amoebae trophozoites by 37.34%, 36.30%, 35.77%, and 68.24%, respectively, as compared to controls. Moreover, ITZ-PCL-PEG2 revealed limited cytotoxicity against human keratinocyte cells. These results are indicative that ITZ-PCL-PEG2 micelle show significantly better anti-amoebic effects as compared to ITZ alone and thus should be investigated further in vivo to determine its clinical potential.
    Matched MeSH terms: Polymers
  4. Han W, Chai X, Zaaboul F, Sun Y, Tan CP, Liu Y
    Food Chem, 2024 Mar 01;435:137584.
    PMID: 37774617 DOI: 10.1016/j.foodchem.2023.137584
    This study investigates the impact of various chain lengths of hydrophilic polyglycerol fatty acid esters (HPGEs), namely SWA-10D, M-7D and M-10D on protein interactions and their influence on the surface morphology and interfacial properties of low-fat aerated emulsions under different pressures conditions. M-7D and M-10D samples exhibited larger particle sizes, higher ζ-potential and rougher surface compared to SWA-10D sample at 1 % concentration of HPGEs. Consequently, M-7D and M-10D samples demonstrated lower values of G', G'', and higher values tan δ at the oil-water interface as pressure increased, thereby promoting the formation of less viscoelastic structures. M-7D sample, characterized by lower content of α-helix structures, resulted in an observable redshift in the NH and CO groups of the protein. Molecular docking analysis affirmed that M-7D sample exhibited a lower absolute binding energy value, indicating stronger interaction with the protein compared to other samples, ultimately contributing to the unstable interfacial membrane formed.
    Matched MeSH terms: Polymers*
  5. Lim SH, Wong TW, Tay WX
    Adv Colloid Interface Sci, 2024 Mar;325:103094.
    PMID: 38359673 DOI: 10.1016/j.cis.2024.103094
    Nanoparticles as cancer therapeutic carrier fail in clinical translation due to complex biological environments in vivo consisting of electrolytes and proteins which render nanoparticle aggregation and unable to reach action site. This review identifies the desirable characteristics of nanoparticles and their constituent materials that prevent aggregation from site of administration (oral, lung, injection) to target site. Oral nanoparticles should ideally be 75-100 nm whereas the size of pulmonary nanoparticles minimally affects their aggregation. Nanoparticles generally should carry excess negative surface charges particularly in fasting state and exert steric hindrance through surface decoration with citrate, anionic surfactants and large polymeric chains (polyethylene glycol and polyvinylpyrrolidone) to prevent aggregation. Anionic as well as cationic nanoparticles are both predisposed to protein corona formation as a function of biological protein isoelectric points. Their nanoparticulate surface composition as such should confer hydrophilicity or steric hindrance to evade protein corona formation or its formation should translate into steric hindrance or surface negative charges to prevent further aggregation. Unexpectedly, smaller and cationic nanoparticles are less prone to aggregation at cancer cell interface favoring endocytosis whereas aggregation is essential to enable nanoparticles retention and subsequent cancer cell uptake in tumor microenvironment. Present studies are largely conducted in vitro with simplified simulated biological media. Future aggregation assessment of nanoparticles in biological fluids that mimic that of patients is imperative to address conflicting materials and designs required as a function of body sites in order to realize the future clinical benefits.
    Matched MeSH terms: Polymers
  6. Kamaraj M, Suresh Babu P, Shyamalagowri S, Pavithra MKS, Aravind J, Kim W, et al.
    J Environ Manage, 2024 Feb;351:119830.
    PMID: 38141340 DOI: 10.1016/j.jenvman.2023.119830
    Cyclodextrin (CD) and its derivatives are receiving attention as a new-generation adsorbent for water pollution treatment due to their external hydrophilic and internal hydrophobic properties. Among types of CD, β-Cyclodextrin (βCD) has been a material of choice with a proven track record for a range of utilities in distinct domains, owing to its unique cage-like structural conformations and inclusion complex-forming ability, especially to mitigate emerging contaminants (ECs). This article outlines βCD composites in developing approaches of their melds and composites for purposes such as membranes for removal of the ECs in aqueous setups have been explored with emphasis on recent trends. Electrospinning has bestowed an entirely different viewpoint on polymeric materials, comprising βCD, in the framework of diverse functions across a multitude of niches. Besides, this article especially discusses βCD polymer composite membrane-based removal of contaminants such as pharmaceutical substances, endocrine disruptors chemicals, and dyes. Finally, in this article, the challenges and future directions of βCD-based adsorbents are discussed, which may shed light on pragmatic commercial applications of βCD polymer composite membranes.
    Matched MeSH terms: Polymers
  7. Yusuf J, Sapuan SM, Ansari MA, Siddiqui VU, Jamal T, Ilyas RA, et al.
    Int J Biol Macromol, 2024 Jan;255:128121.
    PMID: 37984579 DOI: 10.1016/j.ijbiomac.2023.128121
    Material is an inseparable entity for humans to serve different purposes. However, synthetic polymers represent a major category of anthropogenic pollutants with detrimental impacts on natural ecosystems. This escalating environmental issue is characterized by the accumulation of non-biodegradable plastic materials, which pose serious threats to the health of our planet's ecosystem. Cellulose is becoming a focal point for many researchers due to its high availability. It has been used to serve various purposes. Recent scientific advancements have unveiled innovative prospects for the utilization of nanocellulose within the area of advanced science. This comprehensive review investigates deeply into the field of nanocellulose, explaining the methodologies employed in separating nanocellulose from cellulose. It also explains upon two intricately examined applications that emphasize the pivotal role of nanocellulose in nanocomposites. The initial instance pertains to the automotive sector, encompassing cutting-edge applications in electric vehicle (EV) batteries, while the second exemplifies the use of nanocellulose in the field of biomedical applications like otorhinolaryngology, ophthalmology, and wound dressing. This review aims to provide comprehensive information starting from the definitions, identifying the sources of the nanocellulose and its extraction, and ending with the recent applications in the emerging field such as energy storage and biomedical applications.
    Matched MeSH terms: Polymers
  8. Ibrahim IAA, Alzahrani AR, Alanazi IM, Shahzad N, Shahid I, Falemban AH, et al.
    Int J Biol Macromol, 2023 Dec 31;253(Pt 2):126581.
    PMID: 37652322 DOI: 10.1016/j.ijbiomac.2023.126581
    Carbohydrate polymers-based surface-modified nano-delivery systems have gained significant attention in recent years for enhancing targeted delivery to colon cancer. These systems leverage carbohydrate polymers' unique properties, such as biocompatibility, biodegradability, and controlled release. These properties make them suitable candidates for drug delivery applications. Nano-delivery systems loaded with bioactive compounds are well-studied for targeted colorectal cancer delivery. However, those drugs' target reach is still limited in various nano-delivery systems. To overcome this limitation, surface modification of nanoparticles with carbohydrate polymers like chitosan, pectin, alginate, and guar gum showed enhanced target-reaching capacity along with enhanced anticancer efficacy. Recently, a chitosan-decorated PLGA nanoparticle was constructed with tannic acid and vitamin E and showed long-term release of specific targets along with higher anticancer efficacy. Similarly, Chitosan-conjugated glucuronic acid-coated silica nanoparticles loaded with capecitabine were studied against colon cancer and found to be the pH-responsive controlled release of capecitabine with higher anticancer efficacy. Surface-modified carbohydrate polymers have promising potential for improving colon cancer target delivery. By leveraging the unique properties of these polymers, such as surface modification, pH responsiveness, mucoadhesion, controlled drug release, and combination therapy, researchers are working toward developing more effective and targeted treatment strategies for colon cancer.
    Matched MeSH terms: Polymers/chemistry
  9. Ong YT, Chen TM, Don TM
    Int J Biol Macromol, 2023 Dec 31;253(Pt 3):127001.
    PMID: 37729999 DOI: 10.1016/j.ijbiomac.2023.127001
    Polymer blending has been a facile method to resolve the brittle issue of poly(lactic acid) (PLA). Yet, miscibility becomes the primary concern that would affect the synergy effect of polymer blending. This study aimed to improve the miscibility of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) (P34HB) and PLA by lowering their molecular weights via a melt-blending-induced thermal degradation during mechanical mixing to form m-P34HB/PLA blends. The molecular weight of the P34HB was significantly reduced after blending, thereby improving the miscibility of the blends, as evidenced by the shift of glass transition temperatures. Also, simulation based on Flory-Huggins theory demonstrated increased miscibility with decreasing molecular weight of the polymers. Moreover, the thermal gravimetric analysis revealed that the PLA provided a higher shielding effect to the P34HB in the blends prepared by melt-blending than those by solution-blending, that the addition of PLA could retard the chain scission of P34HB and delay its degradation. The addition of m-P34HB at 20 wt% in the blend contributed to a 60-fold enhancement in the elongation at break and an increment of 4.6 folds in the Izod impact strength. The enzymatic degradation using proteinase K revealed the preferential to degrade the PLA in the blends and followed the surface erosion mechanism.
    Matched MeSH terms: Polymers*
  10. Iswarya S, Theivasanthi T, Gopinath SCB
    J Mech Behav Biomed Mater, 2023 Dec;148:106189.
    PMID: 37852086 DOI: 10.1016/j.jmbbm.2023.106189
    Sodium alginate/hydroxyapatite/Nano cellulose (SA/HA/NC) nanocomposite films that possess good biocompatibility for bone tissue engineering are prepared by a simple solution casting. HA is one of the most frequently used bioceramic materials to achieve a high biocompatibility. The bionanocomposite films are analysed by XRD, SEM, EDAX and FTIR studies. XRD confirms the existence of fillers in the polymer. FTIR spectrum shows the different functional modes in the bionanocomposite films. The morphology of fillers and bionanocomposite films are obtained through SEM. The inclusion of NC with different concentrations into the biopolymer film improves the tensile strength. As a result, the loading of 5 wt % of NC and 10 wt% of HA in the SA polymer shows high tensile strength when compared to the pure SA, SA filled with 10 wt% of HA and SA loaded with 10 wt% of HA and inclusion of NC (0.5 and 2.5 wt%). The tensile strength (TS) of bionanocomposite film with 10 wt % of HA is increased by 17%. TS of bionanocomposite film with 0.5 and 2.5 wt% of NC is increased by 177 and 277%, whereas TS of bionanocomposite film loaded 5 wt% of NC is increased by 331%. The swelling, biodegradation and biomineralization tests suggest that this bionanocomposite films are hopeful biomaterials for bone tissue engineering.
    Matched MeSH terms: Polymers
  11. Mahenthiran AV, Jawad ZA, Chin BLF
    Environ Sci Pollut Res Int, 2023 Dec;30(60):124654-124676.
    PMID: 35655021 DOI: 10.1007/s11356-022-20168-3
    The carbon dioxide (CO2) separation technology has become a focus recently, and a developed example is the membrane technology. It is an alternative form of enhanced gas separation performance above the Robeson upper bound line resulting in the idea of mixed matrix membranes (MMMs). With attention given to membrane technologies, the MMMs were fabricated to have the most desirable gas separation performance. In this work, blend MMMs were synthesised by using two polymers, namely, poly(ether sulfone) (PES) and poly (ethylene glycol) (PEG). These polymers were dissolved in blend N-methyl-2-pyrrolidone (NMP) and dimethylformamide (DMF) solvents with the functionalised multi-walled carbon nanotubes (MWCNTs-F) fillers by using the mixing solution method. The embedding of the pristine MWCNTs and MWCNTs-F within the new synthesised MMM was then studied towards CO2/N2 separation. In addition, the optimisation of the loading of MWCNTs-F for blend MMM for CO2/N2 separation was also studied. The experimental results showed that the functionalised MWCNTs (MWCNTs-F) were a better choice at enhancing gas separation compared to the pristine MWCNTs (MWCNTs-P). Additionally, the effects of MWCNTs-F at loadings 0.01 to 0.05% were studied along with the polymer compositions for PES:PEG of 10:20, 20:20 and 30:10. Both these parameters of study affect the manner of gas separation performance in the blend MMMs. Overall, the best performing membrane showed a selectivity value of 1.01 + 0.05 for a blend MMM (MMM-0.03F) fabricated with 20 wt% of PES, 20 wt% of PEG and 0.03 wt% of MWCNTs-F. The MMM-0.03F was able to withstand a pressure of 2 bar, illustrating its mechanical strength and ability to be used in the post combustion carbon capture application industries where the flue gas pressure is at 1.01 bar.
    Matched MeSH terms: Polymers
  12. Mokhtar SMA, Derrick-Roberts ALK, Evans DR, Strudwick XL
    ACS Appl Bio Mater, 2023 Nov 20;6(11):4662-4671.
    PMID: 37902811 DOI: 10.1021/acsabm.3c00416
    Recently, transdermal monitoring and drug delivery have gained much interest, owing to the introduction of the minimally invasive microneedle (MN) device. The advancement of electroactive MNs electrically assisted in the capture of biomarkers or the triggering of drug release. Recent works have combined conducting polymers (CPs) onto MNs owing to the soft nature of the polymers and their tunable ionic and electronic conductivity. Though CPs are reported to work safely in the body, their biocompatibility in the skin has been insufficiently investigated. Furthermore, during electrical biasing of CPs, they undergo reduction or oxidation, which in practical terms leads to release/exchange of ions, which could pose biological risks. This work investigates the viability and proliferation of skin cells upon exposure to an electrochemically biased MN pair comprising two differently doped poly(3,4-ethylenedioxy-thiophene) (PEDOT) polymers that have been designed for skin sampling use. The impact of biasing on human keratinocytes and dermal fibroblasts was determined at different initial cell seeding densities and incubation periods. Indirect testing was employed, whereby the culture media was first exposed to PEDOTs prior to the addition of this extract to cells. In all conditions, both unbiased and biased PEDOT extracts showed no cytotoxicity, but the viability and proliferation of cells cultured at a low cell seeding density were lower than those of the control after 48 h of incubation.
    Matched MeSH terms: Polymers*
  13. Abdullah M, Rafiq A, Shahid N, Nasir Kalam M, Munir Y, Daoud Butt M, et al.
    Pak J Pharm Sci, 2023 Nov;36(6(Special)):1849-1858.
    PMID: 38264890
    Pharmaceutical substance sitagliptin has long been used to treat diabetes. However, subsequent researches have shown that sitagliptin has additional therapeutic effects. Anti-inflammatory effects are observed. Combining sitagliptin with biodegradable polymers like nanoparticles for chemotherapy may be effective. This method enhances therapeutic agent pharmacokinetics. This study tests sitagliptin (SIT) chitosan base nanoparticles against MCF-7 cancer cell lines for anti-cancer effects. Sitagliptin chitosan-based nanoparticles are tested for their ability to suppress MCF-7 cancer cell proliferation. Ionic gelation, a typical nanoparticle manufacturing method, was used. A detailed examination of the nanoparticles followed, using particle-size measurement, FTIR and SEM. Entrapment efficiency, drug-loading, and in-vitro drug release were assessed. Loaded with chitosan and sitagliptin, the nanoparticles averaged 500nm and 534nm in diameter. Sitagliptin has little effect on particle size. Chitosan-based Sitagliptin nanoparticles grew slightly, suggesting Sitagliptin is present. SIT-SC-NPs had 32% encapsulation efficiency and 30% drug content due to their high polymer-to-drug ratio. SEM analysis showed that both drug-free and sitagliptin-loaded nanoparticles are spherical, as shown by the different bands in the photos. The SIT-CS-NPs had a 120-hour release efficiency of up to 80%. This suggests that these nanoparticles could cure hepatocellular carcinoma, specifically MCF-7 cell lines.
    Matched MeSH terms: Polymers
  14. Goh WHD, Lau HS, Yong WF
    Sci Total Environ, 2023 Sep 20;892:164582.
    PMID: 37277034 DOI: 10.1016/j.scitotenv.2023.164582
    Material synthesis requires an enormous amount of organic solvents which leads to huge environmental burdens. Being so, the necessity to utilize non-toxic chemicals is of growing interest in the global market. Harnessing a green fabrication strategy could be a sustainable remedy. Herein, life cycle assessment (LCA) and techno-economic assessment (TEA) using a cradle-to-gate approach to select the green synthesis route for the production of main components in mixed matrix membranes such as polymer and fillers were studied. Five representative synthesis routes of polymers of intrinsic microporosity (PIM-1) and fillers such as UiO-66-NH2 (UiO: University of Oslo) were conducted. Our findings revealed that the tetrachloroterephthalonitrile (TCTPN) synthesized PIM-1 using a novel approach (e.g., P5-Novel synthesis) and solvent-free synthesized UiO-66-NH2 (e.g., U5-Solvent-free) demonstrated the least environmental impact and are most economically feasible. The environmental burden and cost of PIM-1 synthesized by P5-Novel synthesis route decreased by 50 % and 15 %, respectively, while that of UiO-66-NH2 produced via U5-Solvent-free route reduced by 89 % and 52 %, respectively. Additionally, solvent reduction was found to have an apparent effect on cost-saving, whereby the production cost declined 13 % with a 30 % solvent reduction. Alleviation of environmental burdens could also be found through recovering solvents or substituting with a greener alternative (e.g., water). The fundamentals gained on the environmental impacts and economic feasibility of PIM-1 and UiO-66-NH2 production from this LCA-TEA study may provide a preliminary evaluation for the development of green and sustainable materials.
    Matched MeSH terms: Polymers*
  15. Aljabal G, Teh AH, Yap BK
    J Chem Inf Model, 2023 Sep 11;63(17):5619-5630.
    PMID: 37606921 DOI: 10.1021/acs.jcim.3c00791
    14-3-3σ plays an important role in controlling tumor metabolic reprogramming and cancer cell growth. However, its function is often compromised in many cancers due to its downregulation. Previous studies found that homodimerization of 14-3-3σ is critical for its activity. However, to date, it is not known if stabilization of 14-3-3σ homodimers can improve its activity or prevent its degradation. In our previous work, we have showed that GCP-Lys-OMe is a potential 14-3-3σ homodimer stabilizer. However, its stabilizing effect was not experimentally validated. Therefore, in this study, we have attempted to predict few potential peptides that can stabilize the dimeric form of 14-3-3σ using similar in silico techniques as described previously for GCP-Lys-OMe. Subsequent [1H]-CPMG NMR experiments confirmed the binding of the peptides (peptides 3, 5, 9, and 16) on 14-3-3σ, with peptide 3 showing the strongest binding. Competitive [1H]-CPMG assays further revealed that while peptide 3 does not compete with a 14-3-3σ binding peptide (ExoS) for the protein's amphipathic groove, it was found to improve ExoS binding on 14-3-3σ. When 14-3-3σ was subjected to dynamic light scattering experiments, the 14-3-3σ homodimer was found to undergo dissociation into monomers prior to aggregation. Intriguingly, the presence of peptide 3 increased 14-3-3σ stability against aggregation. Overall, our findings suggest that (1) docking accompanied by MD simulations can be used to identify potential homodimer stabilizing compounds of 14-3-3σ and (2) peptide 3 can slow down 14-3-3σ aggregation (presumably by preventing its dissociation into monomers), as well as improving the binding of 14-3-3σ to ExoS protein.
    Matched MeSH terms: Polymers*
  16. Sundera Murthe S, Sreekantan S, Mydin RBSMN, Vasudevan M, Appaturi JN
    Sci Rep, 2023 Sep 01;13(1):14379.
    PMID: 37658068 DOI: 10.1038/s41598-023-41477-8
    The most common material used for blood bags is PVC, which requires the addition of DEHP to increase its flexibility. DEHP is known to cross the polymer barrier and move into the stored blood and, ultimately, the patient's bloodstream. In this work, an alternative prototype composed of SEBS/PP was fabricated through blow-moulding and compared with the commercially available PVC-based blood bag which was designated as the control. The blow-moulded sample layers were welded together using CO2 lasers and optimized to obtain complete sealing of the sides. The samples' performance characteristics were analyzed using water permeability, oxygen permeability, shelf-life, and bioburden tests. The SEBS/PP sample exhibited the highest oxygen permeability rate of 1486.6 cc/m2/24 h after 40 days of ageing, indicating that the sample is conducive for red blood cell (RBC) respiration. On the other hand, the SEBS/PP sample showcased a lower water permeability rate of 0.098 g/h m2 after 40 days of aging, indicating a high-water barrier property and thus preventing water loss during storage. In comparison, the oxygen and water permeability rates of PVC-DEHP were found to be distinctly lower in performance (662.7 cc/m2/24 h and 0.221 g/h m2, respectively). In addition, shelf-life analyses revealed that after 40 days of ageing, polymer samples exhibited no visual damage or degradation. The optimal parameters to obtain adequate welding of the SEBS/PP were determined to be power of 60% (18 W), speed of 70 in/sec and 500 Pulse Per Inch (PPI). Furthermore, the bioburden estimates of SEBS/PP of 115 CFU are markedly lower compared to the bioburden estimate of PVC-DEHP of 213 CFU. The SEBS/PP prototype can potentially be an effective alternative to PVC-based blood bags, particularly for high-risk patients in order to reduce the likelihood of medical issues.
    Matched MeSH terms: Polymers
  17. Yassin SM, Mohamad D, Togoo RA, Sanusi SY, Johari Y
    J Mech Behav Biomed Mater, 2023 Sep;145:106037.
    PMID: 37499522 DOI: 10.1016/j.jmbbm.2023.106037
    The purpose of this study was to systematically review the impact of nanofillers on the physicomechanical properties of resin-based pit and fissure sealants (RBS). This review included in vitro studies with full-length English-language articles reporting on the physicomechanical properties of nanofilled RBS until February 2023. PubMed, Web of Sciences, Scopus, and LILACS databases were accessed for literature searches. The review was formulated based on the Preferred Reporting Items for Systematic Review and Meta-Analyses (PRISMA) guidelines and used the Consolidated Standards of Reporting Trials (CONSORT) guidelines and risk of bias Cochrane tool for quality assessment. The search resulted in 539 papers, of which 22 were eligible to be included in the review. Inorganic, polymeric, core-shell, and composite nanomaterials were used to reinforce the studied RBS. The inherent nature of the nanomaterial used, its morphology, concentration, and volume used were the primary parameters that determined the nanomaterial's success as a filler in RBS. These parameters also influenced their interaction with the resin matrix, which influenced the final physicomechanical properties of RBS. The use of nanofillers that were non-agglomerated and well dispersed in the resin matrix enhanced the physicomechanical properties of RBS.
    Matched MeSH terms: Polymers
  18. Idris SN, Amelia TSM, Bhubalan K, Lazim AMM, Zakwan NAMA, Jamaluddin MI, et al.
    Environ Res, 2023 Aug 15;231(Pt 1):115988.
    PMID: 37105296 DOI: 10.1016/j.envres.2023.115988
    Plastics have become an integral part of human life. Single-use plastics (SUPs) are disposable plastics designed to be used once then promptly discarded or recycled. This SUPs range from packaging and takeaway containers to disposable razors and hotel toiletries. Synthetic plastics, which are made of non-renewable petroleum and natural gas resources, require decades to perpetually disintegrate in nature thus contribute to plastic pollution worldwide, especially in marine environments. In response to these problems, bioplastics or bio-based and biodegradable polymers from renewable sources has been considered as an alternative. Understanding the mechanisms behind the degradation of conventional SUPs and biodegradability of their greener counterpart, bioplastics, is crucial for appropriate material selection in the future. This review aims to provide insights into the degradation or disintegration of conventional single-use plastics and the biodegradability of the different types of greener-counterparts, bioplastics, their mechanisms, and conditions. This review highlights on the biodegradation in the environments including composting systems. Here, the various types of alternative biodegradable polymers, such as bacterially biosynthesised bioplastics, natural fibre-reinforced plastics, starch-, cellulose-, lignin-, and soy-based polymers were explored. Review of past literature revealed that although bioplastics are relatively eco-friendly, their natural compositions and properties are inconsistent. Furthermore, the global plastic market for biodegradable plastics remains relatively small and require further research and commercialization efforts, especially considering the urgency of plastic and microplastic pollution as currently critical global issue. Biodegradable plastics have potential to replace conventional plastics as they show biodegradation ability under real environments, and thus intensive research on the various biodegradable plastics is needed to inform stakeholders and policy makers on the appropriate response to the gradually emerging biodegradable plastics.
    Matched MeSH terms: Polymers
  19. Gopal R, Md Shakhih MF, Sahalan M, Lee TC, Hermawan H, Sivalingam S, et al.
    Colloids Surf B Biointerfaces, 2023 Aug;228:113390.
    PMID: 37315506 DOI: 10.1016/j.colsurfb.2023.113390
    Postoperative bleeding following cardiac surgeries is still an issue that deranges the medical resources and cost. The oral and injection administrations of blood coagulation protein, Factor VII (FVII), is effective to stop the bleeding. However, its short half-life has limited the effectiveness of this treatment and frequent FVII intake may distress the patients. Instead, incorporating FVII into synthetic biodegradable polymers such as polycaprolactone (PCL) that is commonly used in drug delivery applications should provide a solution. Therefore, this study aimed to immobilize FVII on PCL membranes through a cross-linkage polydopamine (PDA) grafting as an intermediate layer. These membranes are intended to provide a solution for cardiac bleeding in coagulating blood and sealing the sutured region. The membranes were evaluated in terms of its physio-chemical properties, thermal behavior, FVII release profile and biocompatibility properties. The ATR-FTIR was used to analyze the chemical functionalities of the membranes. Further validation was done with XPS where the appearances of 0.45 ± 0.06% sulfur composition and C-S peak have confirmed the immobilization of FVII on the PCL membranes. The cross-linked FVIIs were viewed in spherical immobilization on the PCL membranes with a size range between 30 and 210 nm. The surface roughness and hydrophilicity of the membranes were enhanced with a slight shift of melting temperature. The PCL-PDA-FVII0.03 and PCL-PDA-FVII0.05 membranes, with wide area of FVII immobilization released approximately only 22% of FVII into the solution within 60 days period and, it is found that the PCL-PDA-FVIIx membranes projected the Higuchi release model with non-Fickian anomalous transport. While the cytotoxic and hemocompatibility analyses showed advance cell viability, identical coagulation time and low hemolysis ratio on the PCL-PDA-FVIIx membranes. The erythrocytes were viewed in polyhedrocyte coagulated structure under SEM visualization. These results validate the biocompatibility of the membranes and its ability to prolong blood coagulation, thus highlighting its potential application as cardiac bleeding sealant.
    Matched MeSH terms: Polymers/chemistry
  20. Bukhari NTM, Rawi NFM, Hassan NAA, Saharudin NI, Kassim MHM
    Int J Biol Macromol, 2023 Aug 01;245:125486.
    PMID: 37355060 DOI: 10.1016/j.ijbiomac.2023.125486
    A million tonnes of plastic produced each year are disposed of after single use. Biodegradable polymers have become a promising material as an alternative to petroleum-based polymers. Utilising biodegradable polymers will promote environmental sustainability which has emerged with potential features and performances for various applications in different sectors. Seaweed-derived polysaccharides-based composites have been the focus of numerous studies due to the composites' renewability and sustainability for industries (food packaging and medical fields like tissue engineering and drug delivery). Due to their biocompatibility, abundance, and gelling ability, seaweed derivatives such as alginate, carrageenan, and agar are commonly used for this purpose. Seaweed has distinct film-forming characteristics, but its mechanical and water vapour barrier qualities are weak. Thus, modifications are necessary to enhance the seaweed properties. This review article summarises and discusses the effect of incorporating seaweed films with different types of nanoparticles on their mechanical, thermal, and water barrier properties.
    Matched MeSH terms: Polymers
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links